#include <nand.h>
#include <jffs2/jffs2.h>
-typedef struct erase_info erase_info_t;
-typedef struct mtd_info mtd_info_t;
+typedef struct erase_info erase_info_t;
+typedef struct mtd_info mtd_info_t;
/* support only for native endian JFFS2 */
#define cpu_to_je16(x) (x)
/**
* nand_erase_opts: - erase NAND flash with support for various options
- * (jffs2 formating)
+ * (jffs2 formatting)
*
* @param meminfo NAND device to erase
* @param opts options, @see struct nand_erase_options
struct nand_chip *chip = meminfo->priv;
if ((opts->offset & (meminfo->writesize - 1)) != 0) {
- printf("Attempt to erase non page aligned data\n");
+ printf("Attempt to erase non page-aligned data\n");
return -1;
}
erase_length = lldiv(opts->length + meminfo->erasesize - 1,
meminfo->erasesize);
- cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK);
- cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER);
+ cleanmarker.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK);
+ cleanmarker.nodetype = cpu_to_je16(JFFS2_NODETYPE_CLEANMARKER);
cleanmarker.totlen = cpu_to_je32(8);
/* scrub option allows to erase badblock. To prevent internal
erased_length < erase_length;
erase.addr += meminfo->erasesize) {
- WATCHDOG_RESET ();
+ WATCHDOG_RESET();
if (!opts->scrub && bbtest) {
int ret = meminfo->block_isbad(meminfo, erase.addr);
* flash
*
* @param mtd nand mtd instance
- * @param offset page address to query (muss be page aligned!)
+ * @param offset page address to query (must be page-aligned!)
*
* @return -1 in case of error
* >0 lock status:
if ((offset & (mtd->writesize - 1)) != 0) {
- printf ("nand_get_lock_status: "
+ printf("nand_get_lock_status: "
"Start address must be beginning of "
"nand page!\n");
ret = -1;
/* check the WP bit */
chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
if (!(chip->read_byte(mtd) & NAND_STATUS_WP)) {
- printf ("nand_unlock: Device is write protected!\n");
+ printf("nand_unlock: Device is write protected!\n");
ret = -1;
goto out;
}
if ((start & (mtd->erasesize - 1)) != 0) {
- printf ("nand_unlock: Start address must be beginning of "
+ printf("nand_unlock: Start address must be beginning of "
"nand block!\n");
ret = -1;
goto out;
}
if (length == 0 || (length & (mtd->erasesize - 1)) != 0) {
- printf ("nand_unlock: Length must be a multiple of nand block "
+ printf("nand_unlock: Length must be a multiple of nand block "
"size %08x!\n", mtd->erasesize);
ret = -1;
goto out;
pages = nand->erasesize / nand->writesize;
blocksize = (pages * nand->oobsize) + nand->erasesize;
if (*length % (nand->writesize + nand->oobsize)) {
- printf ("Attempt to write incomplete page"
+ printf("Attempt to write incomplete page"
" in yaffs mode\n");
return -EINVAL;
}
* partition boundary). So don't try to handle that.
*/
if ((offset & (nand->writesize - 1)) != 0) {
- printf ("Attempt to write non page aligned data\n");
+ printf("Attempt to write non page-aligned data\n");
*length = 0;
return -EINVAL;
}
need_skip = check_skip_len(nand, offset, *length);
if (need_skip < 0) {
- printf ("Attempt to write outside the flash area\n");
+ printf("Attempt to write outside the flash area\n");
*length = 0;
return -EINVAL;
}
if (!need_skip && !(flags & WITH_DROP_FFS)) {
- rval = nand_write (nand, offset, length, buffer);
+ rval = nand_write(nand, offset, length, buffer);
if (rval == 0)
return 0;
*length = 0;
- printf ("NAND write to offset %llx failed %d\n",
+ printf("NAND write to offset %llx failed %d\n",
offset, rval);
return rval;
}
size_t block_offset = offset & (nand->erasesize - 1);
size_t write_size, truncated_write_size;
- WATCHDOG_RESET ();
+ WATCHDOG_RESET();
- if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
- printf ("Skip bad block 0x%08llx\n",
+ if (nand_block_isbad(nand, offset & ~(nand->erasesize - 1))) {
+ printf("Skip bad block 0x%08llx\n",
offset & ~(nand->erasesize - 1));
offset += nand->erasesize - block_offset;
continue;
}
if (rval != 0) {
- printf ("NAND write to offset %llx failed %d\n",
+ printf("NAND write to offset %llx failed %d\n",
offset, rval);
*length -= left_to_write;
return rval;
* nand_read_skip_bad:
*
* Read image from NAND flash.
- * Blocks that are marked bad are skipped and the next block is readen
+ * Blocks that are marked bad are skipped and the next block is read
* instead as long as the image is short enough to fit even after skipping the
* bad blocks.
*
* @param nand NAND device
* @param offset offset in flash
- * @param length buffer length, on return holds remaining bytes to read
+ * @param length buffer length, on return holds number of read bytes
* @param buffer buffer to write to
* @return 0 in case of success
*/
int need_skip;
if ((offset & (nand->writesize - 1)) != 0) {
- printf ("Attempt to read non page aligned data\n");
+ printf("Attempt to read non page-aligned data\n");
*length = 0;
return -EINVAL;
}
need_skip = check_skip_len(nand, offset, *length);
if (need_skip < 0) {
- printf ("Attempt to read outside the flash area\n");
+ printf("Attempt to read outside the flash area\n");
*length = 0;
return -EINVAL;
}
if (!need_skip) {
- rval = nand_read (nand, offset, length, buffer);
+ rval = nand_read(nand, offset, length, buffer);
if (!rval || rval == -EUCLEAN)
return 0;
*length = 0;
- printf ("NAND read from offset %llx failed %d\n",
+ printf("NAND read from offset %llx failed %d\n",
offset, rval);
return rval;
}
size_t block_offset = offset & (nand->erasesize - 1);
size_t read_length;
- WATCHDOG_RESET ();
+ WATCHDOG_RESET();
- if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
- printf ("Skipping bad block 0x%08llx\n",
+ if (nand_block_isbad(nand, offset & ~(nand->erasesize - 1))) {
+ printf("Skipping bad block 0x%08llx\n",
offset & ~(nand->erasesize - 1));
offset += nand->erasesize - block_offset;
continue;
else
read_length = nand->erasesize - block_offset;
- rval = nand_read (nand, offset, &read_length, p_buffer);
+ rval = nand_read(nand, offset, &read_length, p_buffer);
if (rval && rval != -EUCLEAN) {
- printf ("NAND read from offset %llx failed %d\n",
+ printf("NAND read from offset %llx failed %d\n",
offset, rval);
*length -= left_to_read;
return rval;