86xx: remove the unused code for 86xx family

I believe these code was copied from 74xx family, but for
86xx, it is unused.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Acked-by: Kumar Gala <kumar.gala@freescale.com>

diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 30e60477c5337b9cb4c178fbe708bac2fc2700bb..ab672d1d9970c6b7ed35e3de82ffabdda2352045 100644 (file)
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -647,16 +647,6 @@ relocate_code:
        /*
         * Now relocate code
         */
-#ifdef CONFIG_ECC
-       bl      board_relocate_rom
-       sync
-       mr      r3, r10                         /* Destination Address  */
-       lis     r4, CONFIG_SYS_MONITOR_BASE@h           /* Source      Address  */
-       ori     r4, r4, CONFIG_SYS_MONITOR_BASE@l
-       lwz     r5, GOT(__init_end)
-       sub     r5, r5, r4
-       li      r6, CONFIG_SYS_CACHELINE_SIZE           /* Cache Line Size      */
-#else
        cmplw   cr1,r3,r4
        addi    r0,r5,3
        srwi.   r0,r0,2
@@ -678,7 +668,6 @@ relocate_code:
 3:     lwzu    r0,-4(r8)
        stwu    r0,-4(r7)
        bdnz    3b
-#endif
 /*
  * Now flush the cache: note that we must start from a cache aligned
  * address. Otherwise we might miss one cache line.
@@ -711,9 +700,6 @@ relocate_code:
        blr
 
 in_ram:
-#ifdef CONFIG_ECC
-       bl      board_init_ecc
-#endif
        /*
         * Relocation Function, r14 point to got2+0x8000
         *