]> git.sur5r.net Git - u-boot/commitdiff
atmel, at91: fix taurus board
authorHeiko Schocher <hs@denx.de>
Wed, 28 Jun 2017 09:24:58 +0000 (11:24 +0200)
committerTom Rini <trini@konsulko.com>
Thu, 29 Jun 2017 14:01:12 +0000 (10:01 -0400)
since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support"

taurus board comes not up anymore. Fix it.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
arch/arm/dts/at91sam9g20-taurus.dts
board/siemens/taurus/taurus.c
configs/taurus_defconfig

index f27d77279f32783778e24d3c4ac4ceffec029856..7931c0af7b49c8295aedcf8a95f0bb581af7f6fa 100644 (file)
@@ -18,6 +18,7 @@
        compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9";
 
        chosen {
+               u-boot,dm-pre-reloc;
                stdout-path = &dbgu;
        };
 
@@ -48,6 +49,7 @@
                        };
 
                        dbgu: serial@fffff200 {
+                               u-boot,dm-pre-reloc;
                                status = "okay";
                        };
 
index 8da24be56838a23e064055fe3bfbea3eb78fb321..4aa8d6486904cf37c0006414acb630cb52beefc2 100644 (file)
@@ -448,12 +448,3 @@ U_BOOT_CMD(
 );
 #endif
 #endif
-
-static struct atmel_serial_platdata at91sam9260_serial_plat = {
-       .base_addr = ATMEL_BASE_DBGU,
-};
-
-U_BOOT_DEVICE(at91sam9260_serial) = {
-       .name   = "serial_atmel",
-       .platdata = &at91sam9260_serial_plat,
-};
index 2de9cad6887d2eb6460a4e384c00585accf71120..70d44a760b458f3127af0066bf9190ec6e8038b3 100644 (file)
@@ -7,6 +7,7 @@ CONFIG_TARGET_TAURUS=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x1000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -36,6 +37,8 @@ CONFIG_CMD_PING=y
 # CONFIG_DOS_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_OF_EMBED=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
 CONFIG_DFU_NAND=y
 # CONFIG_MMC is not set
 CONFIG_SPI_FLASH=y