EB+MCF-EV123 \
EB+MCF-EV123_internal \
idmr \
+ M5208EVBE \
M52277EVB \
M5235EVB \
M5249EVB \
## Coldfire
#########################################################################
+M5208EVBE_config : unconfig
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
+
M52277EVB_config \
M52277EVB_spansion_config \
M52277EVB_stmicro_config : unconfig
--- /dev/null
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0
--- /dev/null
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ puts("Board: ");
+ puts("Freescale M5208EVBe\n");
+ return 0;
+};
+
+phys_size_t initdram(int board_type)
+{
+ volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+ u32 dramsize, i;
+
+ dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
+
+ for (i = 0x13; i < 0x20; i++) {
+ if (dramsize == (1 << i))
+ break;
+ }
+ i--;
+
+ sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
+#ifdef CONFIG_SYS_SDRAM_BASE1
+ sdram->cs1 = (CONFIG_SYS_SDRAM_BASE | i);
+#endif
+ sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
+ sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
+
+ udelay(500);
+
+ /* Issue PALL */
+ sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+ asm("nop");
+
+ /* Perform two refresh cycles */
+ sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+ sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+ asm("nop");
+
+ /* Issue LEMR */
+ sdram->mode = CONFIG_SYS_SDRAM_MODE;
+ asm("nop");
+ sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+ asm("nop");
+
+ sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+ asm("nop");
+
+ sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+ asm("nop");
+
+ udelay(100);
+
+ return dramsize;
+};
+
+int testdram(void)
+{
+ /* TODO: XXX XXX XXX */
+ printf("DRAM test not implemented!\n");
+
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mcf52x2/start.o (.text)
+ cpu/mcf52x2/libmcf52x2.a (.text)
+ lib_m68k/libm68k.a (.text)
+ common/dlmalloc.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/env_embedded.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ _sbss = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is5208:=$(shell grep CONFIG_M5208 $(TOPDIR)/include/$(cfg))
is5249:=$(shell grep CONFIG_M5249 $(TOPDIR)/include/$(cfg))
is5253:=$(shell grep CONFIG_M5253 $(TOPDIR)/include/$(cfg))
is5271:=$(shell grep CONFIG_M5271 $(TOPDIR)/include/$(cfg))
ifneq ($(findstring 4.1,$(shell $(CC) --version)),4.1)
+ifneq (,$(findstring CONFIG_M5208,$(is5208)))
+PLATFORM_CPPFLAGS += -mcpu=5208
+endif
ifneq (,$(findstring CONFIG_M5249,$(is5249)))
PLATFORM_CPPFLAGS += -mcpu=5249
endif
#include <asm/immap.h>
#include <netdev.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_M5208
+int do_reset(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+{
+ volatile rcm_t *rcm = (rcm_t *)(MMAP_RCM);
+
+ udelay(1000);
+
+ rcm->rcr = RCM_RCR_SOFTRST;
+
+ /* we don't return! */
+ return 0;
+};
+
+int checkcpu(void)
+{
+ char buf1[32], buf2[32];
+
+ printf("CPU: Freescale Coldfire MCF5208\n"
+ " CPU CLK %s MHz BUS CLK %s MHz\n",
+ strmhz(buf1, gd->cpu_clk),
+ strmhz(buf2, gd->bus_clk));
+ return 0;
+};
+
+#if defined(CONFIG_WATCHDOG)
+/* Called by macro WATCHDOG_RESET */
+void watchdog_reset(void)
+{
+ volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
+ wdt->sr = 0x5555;
+ wdt->sr = 0xAAAA;
+}
+
+int watchdog_disable(void)
+{
+ volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
+
+ wdt->sr = 0x5555; /* reset watchdog counteDECLARE_GLOBAL_DATA_PTR;
+r */
+ wdt->sr = 0xAAAA;
+ wdt->cr = 0; /* disable watchdog timer */
+
+ puts("WATCHDOG:disabled\n");
+ return (0);
+}
+
+int watchdog_init(void)
+{
+ volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
+
+ wdt->cr = 0; /* disable watchdog */
+
+ /* set timeout and enable watchdog */
+ wdt->mr =
+ ((CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000)) - 1;
+ wdt->sr = 0x5555; /* reset watchdog counter */
+ wdt->sr = 0xAAAA;
+
+ puts("WATCHDOG:enabled\n");
+ return (0);
+}
+#endif /* #ifdef CONFIG_WATCHDOG */
+#endif /* #ifdef CONFIG_M5208 */
+
#ifdef CONFIG_M5271
/*
* Both MCF5270 and MCF5271 are members of the MPC5271 family. Try to
}
#endif
+#if defined(CONFIG_M5208)
+void cpu_init_f(void)
+{
+ volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
+
+#ifndef CONFIG_WATCHDOG
+ volatile wdog_t *wdg = (wdog_t *) MMAP_WDOG;
+
+ /* Disable the watchdog if we aren't using it */
+ wdg->cr = 0;
+#endif
+
+ scm1->mpr = 0x77777777;
+ scm1->pacra = 0;
+ scm1->pacrb = 0;
+ scm1->pacrc = 0;
+ scm1->pacrd = 0;
+ scm1->pacre = 0;
+ scm1->pacrf = 0;
+
+ /* FlexBus Chipselect */
+ init_fbcs();
+
+ icache_enable();
+}
+
+/* initialize higher level parts of CPU like timers */
+int cpu_init_r(void)
+{
+ return (0);
+}
+
+void uart_port_conf(void)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+ /* Setup Ports: */
+ switch (CONFIG_SYS_UART_PORT) {
+ case 0:
+ gpio->par_uart &= GPIO_PAR_UART0_MASK;
+ gpio->par_uart |= (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD);
+ break;
+ case 1:
+ gpio->par_uart &= GPIO_PAR_UART0_MASK;
+ gpio->par_uart |= (GPIO_PAR_UART_U1TXD | GPIO_PAR_UART_U1RXD);
+ break;
+ case 2:
+#ifdef CONFIG_SYS_UART2_PRI_GPIO
+ gpio->par_timer &=
+ (GPIO_PAR_TMR_TIN0_MASK | GPIO_PAR_TMR_TIN1_MASK);
+ gpio->par_timer |=
+ (GPIO_PAR_TMR_TIN0_U2TXD | GPIO_PAR_TMR_TIN1_U2RXD);
+#endif
+#ifdef CONFIG_SYS_UART2_ALT1_GPIO
+ gpio->par_feci2c &=
+ (GPIO_PAR_FECI2C_MDC_MASK | GPIO_PAR_FECI2C_MDIO_MASK);
+ gpio->par_feci2c |=
+ (GPIO_PAR_FECI2C_MDC_U2TXD | GPIO_PAR_FECI2C_MDIO_U2RXD);
+#endif
+#ifdef CONFIG_SYS_UART2_ALT1_GPIO
+ gpio->par_feci2c &=
+ (GPIO_PAR_FECI2C_SDA_MASK | GPIO_PAR_FECI2C_SCL_MASK);
+ gpio->par_feci2c |=
+ (GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD);
+#endif
+ break;
+ }
+}
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+ if (setclear) {
+ gpio->par_fec |=
+ GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
+ gpio->par_feci2c |=
+ GPIO_PAR_FECI2C_MDC_MDC | GPIO_PAR_FECI2C_MDIO_MDIO;
+ } else {
+ gpio->par_fec &=
+ (GPIO_PAR_FEC_7W_MASK & GPIO_PAR_FEC_MII_MASK);
+ gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII_MASK;
+ }
+ return 0;
+}
+#endif /* CONFIG_CMD_NET */
+#endif /* CONFIG_M5208 */
+
#if defined(CONFIG_M5253)
/*
* Breath some life into the CPU...
#endif /* CONFIG_MCFTMR */
#endif /* CONFIG_M5272 */
-#if defined(CONFIG_M5282) || defined(CONFIG_M5271) || defined(CONFIG_M5275)
+#if defined(CONFIG_M5208) || defined(CONFIG_M5282) || \
+ defined(CONFIG_M5271) || defined(CONFIG_M5275)
int interrupt_init(void)
{
volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
/* Make sure all interrupts are disabled */
+#if defined(CONFIG_M5208)
+ intp->imrl0 = 0xFFFFFFFF;
+ intp->imrh0 = 0xFFFFFFFF;
+#else
intp->imrl0 |= 0x1;
+#endif
enable_interrupts();
return 0;
DECLARE_GLOBAL_DATA_PTR;
-/*
- * get_clocks() fills in gd->cpu_clock and gd->bus_clk
- */
+/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */
int get_clocks (void)
{
+#if defined(CONFIG_M5208)
+ volatile pll_t *pll = (pll_t *) MMAP_PLL;
+
+ pll->odr = CONFIG_SYS_PLL_ODR;
+ pll->fdr = CONFIG_SYS_PLL_FDR;
+#endif
+
#if defined(CONFIG_M5249) || defined(CONFIG_M5253)
volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR);
unsigned long pllcr;
#endif
gd->cpu_clk = CONFIG_SYS_CLK;
-#if defined(CONFIG_M5249) || defined(CONFIG_M5253) || \
+#if defined(CONFIG_M5208) || defined(CONFIG_M5249) || defined(CONFIG_M5253) || \
defined(CONFIG_M5271) || defined(CONFIG_M5275)
gd->bus_clk = gd->cpu_clk / 2;
#else
nop
move.w #0x2700,%sr
+#if defined(CONFIG_M5208)
+ /* Initialize RAMBAR: locate SRAM and validate it */
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
+ movec %d0, %RAMBAR1
+#endif
+
#if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5253)
move.l #(CONFIG_SYS_MBAR + 1), %d0 /* set MBAR address + valid flag */
move.c %d0, %MBAR
movec %d0, %RAMBAR1
#endif
-#if 0
- /* invalidate and disable cache */
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #0, %d0
- movec %d0, %ACR0
- movec %d0, %ACR1
-#endif
-
/* set stackpointer to end of internal ram to get some stackspace for the first c-code */
move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
clr.l %sp@-
/*------------------------------------------------------------------------------*/
/* cache functions */
+#ifdef CONFIG_M5208
+ .globl icache_enable
+icache_enable:
+ move.l #0x01000000, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #(CONFIG_SYS_SDRAM_BASE + 0xC000), %d0 /* Setup cache mask */
+ movec %d0, %ACR0 /* Enable cache */
+
+ move.l #0x80000200, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
+ nop
+
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
+ moveq #1, %d0
+ move.l %d0, (%a1)
+ rts
+#endif
+
#ifdef CONFIG_M5271
.globl icache_enable
icache_enable:
#ifndef __IMMAP_H
#define __IMMAP_H
+#if defined(CONFIG_MCF520x)
+#include <asm/immap_520x.h>
+#include <asm/m520x.h>
+
+#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0)
+#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
+
+/* Timer */
+#ifdef CONFIG_MCFTMR
+#define CONFIG_SYS_UDELAY_BASE (MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE (MMAP_DTMR1)
+#define CONFIG_SYS_TMRPND_REG (((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
+#define CONFIG_SYS_TMRINTR_NO (INT0_HI_DTMR1)
+#define CONFIG_SYS_TMRINTR_MASK (INTC_IPRH_INT33)
+#define CONFIG_SYS_TMRINTR_PEND (CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI (6)
+#define CONFIG_SYS_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8)
+#endif
+
+#ifdef CONFIG_MCFPIT
+#define CONFIG_SYS_UDELAY_BASE (MMAP_PIT0)
+#define CONFIG_SYS_PIT_BASE (MMAP_PIT1)
+#define CONFIG_SYS_PIT_PRESCALE (6)
+#endif
+
+#define CONFIG_SYS_INTR_BASE (MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS (128)
+#endif /* CONFIG_M520x */
+
#ifdef CONFIG_M52277
#include <asm/immap_5227x.h>
#include <asm/m5227x.h>
--- /dev/null
+/*
+ * MCF520x Internal Memory Map
+ *
+ * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMMAP_520X__
+#define __IMMAP_520X__
+
+#define MMAP_SCM1 (CONFIG_SYS_MBAR + 0x00000000)
+#define MMAP_XBS (CONFIG_SYS_MBAR + 0x00004000)
+#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00008000)
+#define MMAP_FEC0 (CONFIG_SYS_MBAR + 0x00030000)
+#define MMAP_SCM2 (CONFIG_SYS_MBAR + 0x00040000)
+#define MMAP_EDMA (CONFIG_SYS_MBAR + 0x00044000)
+#define MMAP_INTC0 (CONFIG_SYS_MBAR + 0x00048000)
+#define MMAP_INTCACK (CONFIG_SYS_MBAR + 0x00054000)
+#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00058000)
+#define MMAP_QSPI (CONFIG_SYS_MBAR + 0x0005C000)
+#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00060000)
+#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00064000)
+#define MMAP_UART2 (CONFIG_SYS_MBAR + 0x00068000)
+#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00070000)
+#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00074000)
+#define MMAP_DTMR2 (CONFIG_SYS_MBAR + 0x00078000)
+#define MMAP_DTMR3 (CONFIG_SYS_MBAR + 0x0007C000)
+#define MMAP_PIT0 (CONFIG_SYS_MBAR + 0x00080000)
+#define MMAP_PIT1 (CONFIG_SYS_MBAR + 0x00084000)
+#define MMAP_EPORT0 (CONFIG_SYS_MBAR + 0x00088000)
+#define MMAP_WDOG (CONFIG_SYS_MBAR + 0x0008C000)
+#define MMAP_PLL (CONFIG_SYS_MBAR + 0x00090000)
+#define MMAP_RCM (CONFIG_SYS_MBAR + 0x000A0000)
+#define MMAP_CCM (CONFIG_SYS_MBAR + 0x000A0004)
+#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x000A4000)
+#define MMAP_SDRAM (CONFIG_SYS_MBAR + 0x000A8000)
+
+#include <asm/coldfire/crossbar.h>
+#include <asm/coldfire/edma.h>
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/qspi.h>
+
+/* System Controller Module */
+typedef struct scm1 {
+ u32 mpr; /* 0x00 Master Privilege */
+ u32 rsvd1[7];
+ u32 pacra; /* 0x20 Peripheral Access Ctrl A */
+ u32 pacrb; /* 0x24 Peripheral Access Ctrl B */
+ u32 pacrc; /* 0x28 Peripheral Access Ctrl C */
+ u32 pacrd; /* 0x2C Peripheral Access Ctrl D */
+ u32 rsvd2[4];
+ u32 pacre; /* 0x40 Peripheral Access Ctrl E */
+ u32 pacrf; /* 0x44 Peripheral Access Ctrl F */
+ u32 rsvd3[3];
+ u32 bmt; /* 0x50 bus monitor */
+} scm1_t;
+
+typedef struct scm2 {
+ u8 rsvd1[19]; /* 0x00 - 0x12 */
+ u8 wcr; /* 0x13 */
+ u16 rsvd2; /* 0x14 - 0x15 */
+ u16 cwcr; /* 0x16 */
+ u8 rsvd3[3]; /* 0x18 - 0x1A */
+ u8 cwsr; /* 0x1B */
+ u8 rsvd4[3]; /* 0x1C - 0x1E */
+ u8 scmisr; /* 0x1F */
+ u8 rsvd5[79]; /* 0x20 - 0x6F */
+ u32 cfadr; /* 0x70 */
+ u8 rsvd7; /* 0x74 */
+ u8 cfier; /* 0x75 */
+ u8 cfloc; /* 0x76 */
+ u8 cfatr; /* 0x77 */
+ u32 rsvd8; /* 0x78 - 0x7B */
+ u32 cfdtr; /* 0x7C */
+} scm2_t;
+
+/* Chip configuration module */
+typedef struct rcm {
+ u8 rcr;
+ u8 rsr;
+} rcm_t;
+
+typedef struct ccm_ctrl {
+ u16 ccr; /* 0x00 Chip Cfg */
+ u16 res1; /* 0x02 */
+ u16 rcon; /* 0x04 Reset Cfg */
+ u16 cir; /* 0x06 Chip ID */
+} ccm_t;
+
+/* GPIO port */
+typedef struct gpio_ctrl {
+ /* Port Output Data */
+ u8 podr_busctl; /* 0x00 */
+ u8 podr_be; /* 0x01 */
+ u8 podr_cs; /* 0x02 */
+ u8 podr_feci2c; /* 0x03 */
+ u8 podr_qspi; /* 0x04 */
+ u8 podr_timer; /* 0x05 */
+ u8 podr_uart; /* 0x06 */
+ u8 podr_fech; /* 0x07 */
+ u8 podr_fecl; /* 0x08 */
+ u8 res01[3]; /* 0x9 - 0x0B */
+
+ /* Port Data Direction */
+ u8 pddr_busctl; /* 0x0C */
+ u8 pddr_be; /* 0x0D */
+ u8 pddr_cs; /* 0x0E */
+ u8 pddr_feci2c; /* 0x0F */
+ u8 pddr_qspi; /* 0x10*/
+ u8 pddr_timer; /* 0x11 */
+ u8 pddr_uart; /* 0x12 */
+ u8 pddr_fech; /* 0x13 */
+ u8 pddr_fecl; /* 0x14 */
+ u8 res02[5]; /* 0x15 - 0x19 */
+
+ /* Port Data Direction */
+ u8 ppdr_cs; /* 0x1A */
+ u8 ppdr_feci2c; /* 0x1B */
+ u8 ppdr_qspi; /* 0x1C */
+ u8 ppdr_timer; /* 0x1D */
+ u8 ppdr_uart; /* 0x1E */
+ u8 ppdr_fech; /* 0x1F */
+ u8 ppdr_fecl; /* 0x20 */
+ u8 res03[3]; /* 0x21 - 0x23 */
+
+ /* Port Clear Output Data */
+ u8 pclrr_busctl; /* 0x24 */
+ u8 pclrr_be; /* 0x25 */
+ u8 pclrr_cs; /* 0x26 */
+ u8 pclrr_feci2c; /* 0x27 */
+ u8 pclrr_qspi; /* 0x28 */
+ u8 pclrr_timer; /* 0x29 */
+ u8 pclrr_uart; /* 0x2A */
+ u8 pclrr_fech; /* 0x2B */
+ u8 pclrr_fecl; /* 0x2C */
+ u8 res04[3]; /* 0x2D - 0x2F */
+
+ /* Pin Assignment */
+ u8 par_busctl; /* 0x30 */
+ u8 par_be; /* 0x31 */
+ u8 par_cs; /* 0x32 */
+ u8 par_feci2c; /* 0x33 */
+ u8 par_qspi; /* 0x34 */
+ u8 par_timer; /* 0x35 */
+ u16 par_uart; /* 0x36 */
+ u8 par_fec; /* 0x38 */
+ u8 par_irq; /* 0x39 */
+
+ /* Mode Select Control */
+ /* Drive Strength Control */
+ u8 mscr_fb; /* 0x3A */
+ u8 mscr_sdram; /* 0x3B */
+
+ u8 dscr_i2c; /* 0x3C */
+ u8 dscr_misc; /* 0x3D */
+ u8 dscr_fec; /* 0x3E */
+ u8 dscr_uart; /* 0x3F */
+ u8 dscr_qspi; /* 0x40 */
+} gpio_t;
+
+/* SDRAM controller */
+typedef struct sdram_ctrl {
+ u32 mode; /* 0x00 Mode/Extended Mode */
+ u32 ctrl; /* 0x04 Ctrl */
+ u32 cfg1; /* 0x08 Cfg 1 */
+ u32 cfg2; /* 0x0C Cfg 2 */
+ u32 res1[64]; /* 0x10 - 0x10F */
+ u32 cs0; /* 0x110 Chip Select 0 Cfg */
+ u32 cs1; /* 0x114 Chip Select 1 Cfg */
+} sdram_t;
+
+/* Clock Module */
+typedef struct pll_ctrl {
+ u8 odr; /* 0x00 Output divider */
+ u8 rsvd1;
+ u8 cr; /* 0x02 Control */
+ u8 rsvd2;
+ u8 mdr; /* 0x04 Modulation Divider */
+ u8 rsvd3;
+ u8 fdr; /* 0x06 Feedback Divider */
+ u8 rsvd4;
+} pll_t;
+
+/* Watchdog registers */
+typedef struct wdog_ctrl {
+ u16 cr; /* 0x00 Control */
+ u16 mr; /* 0x02 Modulus */
+ u16 cntr; /* 0x04 Count */
+ u16 sr; /* 0x06 Service */
+} wdog_t;
+
+#endif /* __IMMAP_520X__ */
--- /dev/null
+/*
+ * m520x.h -- Definitions for Freescale Coldfire 520x
+ *
+ * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __M520X__
+#define __M520X__
+
+/* *** System Control Module (SCM) *** */
+#define SCM_MPR_MPROT0(x) (((x) & 0x0F) << 28)
+#define SCM_MPR_MPROT1(x) (((x) & 0x0F) << 24)
+#define SCM_MPR_MPROT2(x) (((x) & 0x0F) << 20)
+#define MPROT_MTR 4
+#define MPROT_MTW 2
+#define MPROT_MPL 1
+
+#define SCM_PACRA_PACR0(x) (((x) & 0x0F) << 28)
+#define SCM_PACRA_PACR1(x) (((x) & 0x0F) << 24)
+#define SCM_PACRA_PACR2(x) (((x) & 0x0F) << 20)
+
+#define SCM_PACRB_PACR12(x) (((x) & 0x0F) << 12)
+
+#define SCM_PACRC_PACR16(x) (((x) & 0x0F) << 28)
+#define SCM_PACRC_PACR17(x) (((x) & 0x0F) << 24)
+#define SCM_PACRC_PACR18(x) (((x) & 0x0F) << 20)
+#define SCM_PACRC_PACR21(x) (((x) & 0x0F) << 8)
+#define SCM_PACRC_PACR22(x) (((x) & 0x0F) << 4)
+#define SCM_PACRC_PACR23(x) ((x) & 0x0F)
+
+#define SCM_PACRD_PACR24(x) (((x) & 0x0F) << 28)
+#define SCM_PACRD_PACR25(x) (((x) & 0x0F) << 24)
+#define SCM_PACRD_PACR26(x) (((x) & 0x0F) << 20)
+#define SCM_PACRD_PACR28(x) (((x) & 0x0F) << 12)
+#define SCM_PACRD_PACR29(x) (((x) & 0x0F) << 8)
+#define SCM_PACRD_PACR30(x) (((x) & 0x0F) << 4)
+#define SCM_PACRD_PACR31(x) ((x) & 0x0F)
+
+#define SCM_PACRE_PACR32(x) (((x) & 0x0F) << 28)
+#define SCM_PACRE_PACR33(x) (((x) & 0x0F) << 24)
+#define SCM_PACRE_PACR34(x) (((x) & 0x0F) << 20)
+#define SCM_PACRE_PACR35(x) (((x) & 0x0F) << 16)
+#define SCM_PACRE_PACR36(x) (((x) & 0x0F) << 12)
+
+#define SCM_PACRF_PACR40(x) (((x) & 0x0F) << 28)
+#define SCM_PACRF_PACR41(x) (((x) & 0x0F) << 24)
+#define SCM_PACRF_PACR42(x) (((x) & 0x0F) << 20)
+
+#define PACR_SP 4
+#define PACR_WP 2
+#define PACR_TP 1
+
+#define SCM_BMT_BME (0x00000008)
+#define SCM_BMT_BMT_MASK (0x07)
+#define SCM_BMT_BMT(x) ((x) & 0x07)
+#define SCM_BMT_BMT1024 (0x0000)
+#define SCM_BMT_BMT512 (0x0001)
+#define SCM_BMT_BMT256 (0x0002)
+#define SCM_BMT_BMT128 (0x0003)
+#define SCM_BMT_BMT64 (0x0004)
+#define SCM_BMT_BMT32 (0x0005)
+#define SCM_BMT_BMT16 (0x0006)
+#define SCM_BMT_BMT8 (0x0007)
+
+#define SCM_CWCR_RO (0x8000)
+#define SCM_CWCR_CWR_WH (0x0100)
+#define SCM_CWCR_CWE (0x0080)
+#define SCM_CWRI_WINDOW (0x0060)
+#define SCM_CWRI_RESET (0x0040)
+#define SCM_CWRI_INT_RESET (0x0020)
+#define SCM_CWRI_INT (0x0000)
+#define SCM_CWCR_CWT(x) (((x) & 0x001F))
+
+#define SCM_ISR_CFEI (0x02)
+#define SCM_ISR_CWIC (0x01)
+
+#define SCM_CFIER_ECFEI (0x01)
+
+#define SCM_CFLOC_LOC (0x80)
+
+#define SCM_CFATR_WRITE (0x80)
+#define SCM_CFATR_SZ32 (0x20)
+#define SCM_CFATR_SZ16 (0x10)
+#define SCM_CFATR_SZ08 (0x00)
+#define SCM_CFATR_CACHE (0x08)
+#define SCM_CFATR_MODE (0x02)
+#define SCM_CFATR_TYPE (0x01)
+
+/* *** Interrupt Controller (INTC) *** */
+#define INT0_LO_RSVD0 (0)
+#define INT0_LO_EPORT_F1 (1)
+#define INT0_LO_EPORT_F4 (2)
+#define INT0_LO_EPORT_F7 (3)
+#define INT1_LO_PIT0 (4)
+#define INT1_LO_PIT1 (5)
+/* 6 - 7 rsvd */
+#define INT0_LO_EDMA_00 (8)
+#define INT0_LO_EDMA_01 (9)
+#define INT0_LO_EDMA_02 (10)
+#define INT0_LO_EDMA_03 (11)
+#define INT0_LO_EDMA_04 (12)
+#define INT0_LO_EDMA_05 (13)
+#define INT0_LO_EDMA_06 (14)
+#define INT0_LO_EDMA_07 (15)
+#define INT0_LO_EDMA_08 (16)
+#define INT0_LO_EDMA_09 (17)
+#define INT0_LO_EDMA_10 (18)
+#define INT0_LO_EDMA_11 (19)
+#define INT0_LO_EDMA_12 (20)
+#define INT0_LO_EDMA_13 (21)
+#define INT0_LO_EDMA_14 (22)
+#define INT0_LO_EDMA_15 (23)
+#define INT0_LO_EDMA_ERR (24)
+#define INT0_LO_SCM_CWIC (25)
+#define INT0_LO_UART0 (26)
+#define INT0_LO_UART1 (27)
+#define INT0_LO_UART2 (28)
+/* 29 rsvd */
+#define INT0_LO_I2C (30)
+#define INT0_LO_QSPI (31)
+
+#define INT0_HI_DTMR0 (32)
+#define INT0_HI_DTMR1 (33)
+#define INT0_HI_DTMR2 (34)
+#define INT0_HI_DTMR3 (35)
+#define INT0_HI_FEC0_TXF (36)
+#define INT0_HI_FEC0_TXB (37)
+#define INT0_HI_FEC0_UN (38)
+#define INT0_HI_FEC0_RL (39)
+#define INT0_HI_FEC0_RXF (40)
+#define INT0_HI_FEC0_RXB (41)
+#define INT0_HI_FEC0_MII (42)
+#define INT0_HI_FEC0_LC (43)
+#define INT0_HI_FEC0_HBERR (44)
+#define INT0_HI_FEC0_GRA (45)
+#define INT0_HI_FEC0_EBERR (46)
+#define INT0_HI_FEC0_BABT (47)
+#define INT0_HI_FEC0_BABR (48)
+/* 49 - 61 rsvd */
+#define INT0_HI_SCMISR_CFEI (62)
+
+/* *** Reset Controller Module (RCM) *** */
+#define RCM_RCR_SOFTRST (0x80)
+#define RCM_RCR_FRCRSTOUT (0x40)
+
+#define RCM_RSR_SOFT (0x20)
+#define RCM_RSR_WDOG (0x10)
+#define RCM_RSR_POR (0x08)
+#define RCM_RSR_EXT (0x04)
+#define RCM_RSR_WDR_CORE (0x02)
+#define RCM_RSR_LOL (0x01)
+
+/* *** Chip Configuration Module (CCM) *** */
+#define CCM_CCR_CSC (0x0200)
+#define CCM_CCR_OSCFREQ (0x0080)
+#define CCM_CCR_LIMP (0x0040)
+#define CCM_CCR_LOAD (0x0020)
+#define CCM_CCR_BOOTPS(x) (((x) & 0x0003) << 3)
+#define CCM_CCR_OSC_MODE (0x0004)
+#define CCM_CCR_PLL_MODE (0x0002)
+#define CCM_CCR_RESERVED (0x0001)
+
+#define CCM_CIR_PIN(x) (((x) & 0x03FF) << 6)
+#define CCM_CIR_PRN(x) ((x) & 0x003F)
+
+/* *** General Purpose I/O (GPIO) *** */
+#define GPIO_PDR_BUSCTL(x) ((x) & 0x0F)
+#define GPIO_PDR_BE(x) ((x) & 0x0F)
+#define GPIO_PDR_CS(x) (((x) & 0x07) << 1)
+#define GPIO_PDR_FECI2C(x) ((x) & 0x0F)
+#define GPIO_PDR_QSPI(x) ((x) & 0x0F)
+#define GPIO_PDR_TIMER(x) ((x) & 0x0F)
+#define GPIO_PDR_UART(x) ((x) & 0xFF)
+#define GPIO_PDR_FECH(x) ((x) & 0xFF)
+#define GPIO_PDR_FECL(x) ((x) & 0xFF)
+
+#define GPIO_PAR_FBCTL_OE (0x10)
+#define GPIO_PAR_FBCTL_TA (0x08)
+#define GPIO_PAR_FBCTL_RWB (0x04)
+#define GPIO_PAR_FBCTL_TS_MASK (0xFC)
+#define GPIO_PAR_FBCTL_TS_TS (0x03)
+#define GPIO_PAR_FBCTL_TS_DMA (0x02)
+
+#define GPIO_PAR_BE3 (0x08)
+#define GPIO_PAR_BE2 (0x04)
+#define GPIO_PAR_BE1 (0x02)
+#define GPIO_PAR_BE0 (0x01)
+
+#define GPIO_PAR_CS3 (0x08)
+#define GPIO_PAR_CS2 (0x04)
+#define GPIO_PAR_CS1_MASK (0xFC)
+#define GPIO_PAR_CS1_CS1 (0x03)
+#define GPIO_PAR_CS1_SDCS1 (0x02)
+
+#define GPIO_PAR_FECI2C_RMII_MASK (0x0F)
+#define GPIO_PAR_FECI2C_MDC_MASK (0x3F)
+#define GPIO_PAR_FECI2C_MDC_MDC (0xC0)
+#define GPIO_PAR_FECI2C_MDC_SCL (0x80)
+#define GPIO_PAR_FECI2C_MDC_U2TXD (0x40)
+#define GPIO_PAR_FECI2C_MDIO_MASK (0xCF)
+#define GPIO_PAR_FECI2C_MDIO_MDIO (0x30)
+#define GPIO_PAR_FECI2C_MDIO_SDA (0x20)
+#define GPIO_PAR_FECI2C_MDIO_U2RXD (0x10)
+#define GPIO_PAR_FECI2C_I2C_MASK (0xF0)
+#define GPIO_PAR_FECI2C_SCL_MASK (0xF3)
+#define GPIO_PAR_FECI2C_SCL_SCL (0x0C)
+#define GPIO_PAR_FECI2C_SCL_U2RXD (0x04)
+#define GPIO_PAR_FECI2C_SDA_MASK (0xFC)
+#define GPIO_PAR_FECI2C_SDA_SDA (0x03)
+#define GPIO_PAR_FECI2C_SDA_U2TXD (0x01)
+
+#define GPIO_PAR_QSPI_PCS2_MASK (0x3F)
+#define GPIO_PAR_QSPI_PCS2_PCS2 (0xC0)
+#define GPIO_PAR_QSPI_PCS2_DACK0 (0x80)
+#define GPIO_PAR_QSPI_PCS2_U2RTS (0x40)
+#define GPIO_PAR_QSPI_DIN_MASK (0xCF)
+#define GPIO_PAR_QSPI_DIN_DIN (0x30)
+#define GPIO_PAR_QSPI_DIN_DREQ0 (0x20)
+#define GPIO_PAR_QSPI_DIN_U2CTS (0x10)
+#define GPIO_PAR_QSPI_DOUT_MASK (0xF3)
+#define GPIO_PAR_QSPI_DOUT_DOUT (0x0C)
+#define GPIO_PAR_QSPI_DOUT_SDA (0x08)
+#define GPIO_PAR_QSPI_SCK_MASK (0xFC)
+#define GPIO_PAR_QSPI_SCK_SCK (0x03)
+#define GPIO_PAR_QSPI_SCK_SCL (0x02)
+
+#define GPIO_PAR_TMR_TIN3(x) (((x) & 0x03) << 6)
+#define GPIO_PAR_TMR_TIN2(x) (((x) & 0x03) << 4)
+#define GPIO_PAR_TMR_TIN1(x) (((x) & 0x03) << 2)
+#define GPIO_PAR_TMR_TIN0(x) ((x) & 0x03)
+#define GPIO_PAR_TMR_TIN3_MASK (0x3F)
+#define GPIO_PAR_TMR_TIN3_TIN3 (0xC0)
+#define GPIO_PAR_TMR_TIN3_TOUT3 (0x80)
+#define GPIO_PAR_TMR_TIN3_U2CTS (0x40)
+#define GPIO_PAR_TMR_TIN2_MASK (0xCF)
+#define GPIO_PAR_TMR_TIN2_TIN2 (0x30)
+#define GPIO_PAR_TMR_TIN2_TOUT2 (0x20)
+#define GPIO_PAR_TMR_TIN2_U2RTS (0x10)
+#define GPIO_PAR_TMR_TIN1_MASK (0xF3)
+#define GPIO_PAR_TMR_TIN1_TIN1 (0x0C)
+#define GPIO_PAR_TMR_TIN1_TOUT1 (0x08)
+#define GPIO_PAR_TMR_TIN1_U2RXD (0x04)
+#define GPIO_PAR_TMR_TIN0_MASK (0xFC)
+#define GPIO_PAR_TMR_TIN0_TIN0 (0x03)
+#define GPIO_PAR_TMR_TIN0_TOUT0 (0x02)
+#define GPIO_PAR_TMR_TIN0_U2TXD (0x01)
+
+#define GPIO_PAR_UART1_MASK (0xF03F)
+#define GPIO_PAR_UART0_MASK (0xFFC0)
+#define GPIO_PAR_UART_U1CTS_MASK (0xF3FF)
+#define GPIO_PAR_UART_U1CTS_U1CTS (0x0C00)
+#define GPIO_PAR_UART_U1CTS_TIN1 (0x0800)
+#define GPIO_PAR_UART_U1CTS_PCS1 (0x0400)
+#define GPIO_PAR_UART_U1RTS_MASK (0xFCFF)
+#define GPIO_PAR_UART_U1RTS_U1RTS (0x0300)
+#define GPIO_PAR_UART_U1RTS_TOUT1 (0x0200)
+#define GPIO_PAR_UART_U1RTS_PCS1 (0x0100)
+#define GPIO_PAR_UART_U1TXD (0x0080)
+#define GPIO_PAR_UART_U1RXD (0x0040)
+#define GPIO_PAR_UART_U0CTS_MASK (0xFFCF)
+#define GPIO_PAR_UART_U0CTS_U0CTS (0x0030)
+#define GPIO_PAR_UART_U0CTS_TIN0 (0x0020)
+#define GPIO_PAR_UART_U0CTS_PCS0 (0x0010)
+#define GPIO_PAR_UART_U0RTS_MASK (0xFFF3)
+#define GPIO_PAR_UART_U0RTS_U0RTS (0x000C)
+#define GPIO_PAR_UART_U0RTS_TOUT0 (0x0008)
+#define GPIO_PAR_UART_U0RTS_PCS0 (0x0004)
+#define GPIO_PAR_UART_U0TXD (0x0002)
+#define GPIO_PAR_UART_U0RXD (0x0001)
+
+#define GPIO_PAR_FEC_7W_MASK (0xF3)
+#define GPIO_PAR_FEC_7W_FEC (0x0C)
+#define GPIO_PAR_FEC_7W_U1RTS (0x04)
+#define GPIO_PAR_FEC_MII_MASK (0xFC)
+#define GPIO_PAR_FEC_MII_FEC (0x03)
+#define GPIO_PAR_FEC_MII_UnCTS (0x01)
+
+#define GPIO_PAR_IRQ_IRQ4 (0x01)
+
+#define GPIO_MSCR_FB_FBCLK(x) (((x) & 0x03) << 6)
+#define GPIO_MSCR_FB_DUP(x) (((x) & 0x03) << 4)
+#define GPIO_MSCR_FB_DLO(x) (((x) & 0x03) << 2)
+#define GPIO_MSCR_FB_ADRCTL(x) ((x) & 0x03)
+#define GPIO_MSCR_FB_FBCLK_MASK (0x3F)
+#define GPIO_MSCR_FB_DUP_MASK (0xCF)
+#define GPIO_MSCR_FB_DLO_MASK (0xF3)
+#define GPIO_MSCR_FB_ADRCTL_MASK (0xFC)
+
+#define GPIO_MSCR_SDR_SDCLKB(x) (((x) & 0x03) << 4)
+#define GPIO_MSCR_SDR_SDCLK(x) (((x) & 0x03) << 2)
+#define GPIO_MSCR_SDR_SDRAM(x) ((x) & 0x03)
+#define GPIO_MSCR_SDR_SDCLKB_MASK (0xCF)
+#define GPIO_MSCR_SDR_SDCLK_MASK (0xF3)
+#define GPIO_MSCR_SDR_SDRAM_MASK (0xFC)
+
+#define MSCR_25VDDR (0x03)
+#define MSCR_18VDDR_FULL (0x02)
+#define MSCR_OPENDRAIN (0x01)
+#define MSCR_18VDDR_HALF (0x00)
+
+#define GPIO_DSCR_I2C(x) ((x) & 0x03)
+#define GPIO_DSCR_I2C_MASK (0xFC)
+
+#define GPIO_DSCR_MISC_DBG(x) (((x) & 0x03) << 4)
+#define GPIO_DSCR_MISC_DBG_MASK (0xCF)
+#define GPIO_DSCR_MISC_RSTOUT(x) (((x) & 0x03) << 2)
+#define GPIO_DSCR_MISC_RSTOUT_MASK (0xF3)
+#define GPIO_DSCR_MISC_TIMER(x) ((x) & 0x03)
+#define GPIO_DSCR_MISC_TIMER_MASK (0xFC)
+
+#define GPIO_DSCR_FEC(x) ((x) & 0x03)
+#define GPIO_DSCR_FEC_MASK (0xFC)
+
+#define GPIO_DSCR_UART_UART1(x) (((x) & 0x03) << 4)
+#define GPIO_DSCR_UART_UART1_MASK (0xCF)
+#define GPIO_DSCR_UART_UART0(x) (((x) & 0x03) << 2)
+#define GPIO_DSCR_UART_UART0_MASK (0xF3)
+#define GPIO_DSCR_UART_IRQ(x) ((x) & 0x03)
+#define GPIO_DSCR_UART_IRQ_MASK (0xFC)
+
+#define GPIO_DSCR_QSPI(x) ((x) & 0x03)
+#define GPIO_DSCR_QSPI_MASK (0xFC)
+
+#define DSCR_50PF (0x03)
+#define DSCR_30PF (0x02)
+#define DSCR_20PF (0x01)
+#define DSCR_10PF (0x00)
+
+/* *** Phase Locked Loop (PLL) *** */
+#define PLL_PODR_CPUDIV(x) (((x) & 0x0F) << 4)
+#define PLL_PODR_CPUDIV_MASK (0x0F)
+#define PLL_PODR_BUSDIV(x) ((x) & 0x0F)
+#define PLL_PODR_BUSDIV_MASK (0xF0)
+
+#define PLL_PCR_DITHEN (0x80)
+#define PLL_PCR_DITHDEV(x) ((x) & 0x07)
+#define PLL_PCR_DITHDEV_MASK (0xF8)
+
+#endif /* __M520X__ */
--- /dev/null
+/*
+ * Configuation settings for the Freescale MCF5208EVBe.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _M5208EVBE_H
+#define _M5208EVBE_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF520x /* define processor family */
+#define CONFIG_M5208 /* define processor type */
+
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT (0)
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#undef CONFIG_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT 5000
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#undef CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+# define CONFIG_NET_MULTI 1
+# define CONFIG_MII 1
+# define CONFIG_MII_INIT 1
+# define CONFIG_SYS_DISCOVER_PHY
+# define CONFIG_SYS_RX_ETH_BUFFER 8
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_HAS_ETH1
+
+# define CONFIG_SYS_FEC0_PINMUX 0
+# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
+# define MCFFEC_TOUT_LOOP 50000
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CONFIG_SYS_DISCOVER_PHY
+# define FECDUPLEX FULL
+# define FECSPEED _100BASET
+# else
+# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# endif
+# endif /* CONFIG_SYS_DISCOVER_PHY */
+#endif
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C /* I2C with hw support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SPEED 80000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x58000
+#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
+
+#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
+#define CONFIG_UDP_CHECKSUM
+
+#ifdef CONFIG_MCFFEC
+# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
+# define CONFIG_IPADDR 192.162.1.2
+# define CONFIG_NETMASK 255.255.255.0
+# define CONFIG_SERVERIP 192.162.1.1
+# define CONFIG_GATEWAYIP 192.162.1.1
+# define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif /* CONFIG_MCFFEC */
+
+#define CONFIG_HOSTNAME M5208EVBe
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "loadaddr=40010000\0" \
+ "u-boot=u-boot.bin\0" \
+ "load=tftp ${loadaddr) ${u-boot}\0" \
+ "upd=run load; run prog\0" \
+ "prog=prot off 0 3ffff;" \
+ "era 0 3ffff;" \
+ "cp.b ${loadaddr} 0 ${filesize};" \
+ "save\0" \
+ ""
+
+#define CONFIG_PRAM 512 /* 512 KB */
+#define CONFIG_SYS_PROMPT "-> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+
+#ifdef CONFIG_CMD_KGDB
+# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buf Sz */
+#define CONFIG_SYS_LOAD_ADDR 0x40010000
+
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_CLK 166666666 /* CPU Core Clock */
+#define CONFIG_SYS_PLL_ODR 0x36
+#define CONFIG_SYS_PLL_FDR 0x7D
+
+#define CONFIG_SYS_MBAR 0xFC000000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/* Definitions for initial stack pointer and data area (in DPRAM) */
+#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
+#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL 0x221
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_CFG1 0x43711630
+#define CONFIG_SYS_SDRAM_CFG2 0x56670000
+#define CONFIG_SYS_SDRAM_CTRL 0xE1002000
+#define CONFIG_SYS_SDRAM_EMOD 0x80010000
+#define CONFIG_SYS_SDRAM_MODE 0x00CD0000
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
+
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+
+#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
+#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20)
+
+/* FLASH organization */
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+# define CONFIG_FLASH_CFI_DRIVER 1
+# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */
+# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+# define CONFIG_SYS_MAX_FLASH_SECT 254 /* max number of sectors on one chip */
+# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+#endif
+
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
+
+/*
+ * Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#define CONFIG_ENV_OFFSET 0x2000
+#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_ENV_SECT_SIZE 0x2000
+#define CONFIG_ENV_IS_IN_FLASH 1
+
+/* Cache Configuration */
+#define CONFIG_SYS_CACHELINE_SIZE 16
+
+/* Chipselect bank definitions */
+/*
+ * CS0 - NOR Flash
+ * CS1 - Available
+ * CS2 - Available
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ */
+#define CONFIG_SYS_CS0_BASE 0
+#define CONFIG_SYS_CS0_MASK 0x007F0001
+#define CONFIG_SYS_CS0_CTRL 0x00001FA0
+
+#endif /* _M5208EVBE_H */
projects / u-boot / commitdiff