NAND: Add support for MPC8572DS board

This patch defines 1M TLB&LAW size for NAND on MPC8572DS, assigns
0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in
config file.

It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image, to
make room for the increased code size with NAND enabled.

Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

diff --git a/board/freescale/mpc8572ds/law.c b/board/freescale/mpc8572ds/law.c
index 9f119024687f90719717c4f6fb0c1696dcc3e3a1..83eb6811c05f89ca10d6f4a6d4b1909d3d4a09f4 100644 (file)
--- a/board/freescale/mpc8572ds/law.c
+++ b/board/freescale/mpc8572ds/law.c
@@ -36,6 +36,7 @@ struct law_entry law_table[] = {
        SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
        SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
        SET_LAW(PIXIS_BASE, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
+       SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);

diff --git a/board/freescale/mpc8572ds/tlb.c b/board/freescale/mpc8572ds/tlb.c
index 1c5ed3f2dff6fc8ca3164a64b25d970d437a5688..8d1f646fac7f94355e6b99e92461e34f9038d98c 100644 (file)
--- a/board/freescale/mpc8572ds/tlb.c
+++ b/board/freescale/mpc8572ds/tlb.c
@@ -80,6 +80,12 @@ struct fsl_e_tlb_entry tlb_table[] = {
        SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_PHYS, CONFIG_SYS_PCIE3_IO_PHYS,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 6, BOOKE_PAGESZ_256K, 1),
+
+       /* *I*G - NAND */
+       SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                     0, 7, BOOKE_PAGESZ_1M, 1),
+
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index eefb06c67aafb536bebbc4f1f4fe800f403eb3f5..f98e7fbf000a2a46ed8383a84e802ec974ec9821 100644 (file)
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -158,6 +158,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * Localbus non-cacheable
  * 0xe000_0000 0xe80f_ffff     Promjet/free            128M non-cacheable
  * 0xe800_0000 0xefff_ffff     FLASH                   128M non-cacheable
+ * 0xffa0_0000 0xffaf_ffff     NAND                    1M non-cacheable
  * 0xffdf_0000 0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
  * 0xffd0_0000 0xffd0_3fff     L1 for stack            16K Cacheable TLB0
  * 0xffe0_0000 0xffef_ffff     CCSR                    1M non-cacheable
@@ -260,6 +261,59 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_MONITOR_LEN         (256 * 1024) /* Reserve 256 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)   /* Reserved for malloc */
 
+#define CONFIG_SYS_NAND_BASE           0xffa00000
+#define CONFIG_SYS_NAND_BASE_PHYS      CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
+                               CONFIG_SYS_NAND_BASE + 0x40000, \
+                               CONFIG_SYS_NAND_BASE + 0x80000,\
+                               CONFIG_SYS_NAND_BASE + 0xC0000}
+#define CONFIG_SYS_MAX_NAND_DEVICE    4
+#define NAND_MAX_CHIPS         1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND        1
+#define CONFIG_NAND_FSL_ELBC   1
+#define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
+
+/* NAND flash config */
+#define CONFIG_NAND_BR_PRELIM  (CONFIG_SYS_NAND_BASE_PHYS \
+                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+                               | BR_PS_8               /* Port Size = 8 bit */ \
+                               | BR_MS_FCM             /* MSEL = FCM */ \
+                               | BR_V)                 /* valid */
+#define CONFIG_NAND_OR_PRELIM  (0xFFFC0000            /* length 256K */ \
+                               | OR_FCM_PGS            /* Large Page*/ \
+                               | OR_FCM_CSCT \
+                               | OR_FCM_CST \
+                               | OR_FCM_CHT \
+                               | OR_FCM_SCY_1 \
+                               | OR_FCM_TRLX \
+                               | OR_FCM_EHTR)
+
+#define CONFIG_SYS_BR2_PRELIM  CONFIG_NAND_BR_PRELIM  /* NAND Base Address */
+#define CONFIG_SYS_OR2_PRELIM  CONFIG_NAND_OR_PRELIM  /* NAND Options */
+
+#define CONFIG_SYS_BR4_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)\
+                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+                               | BR_PS_8               /* Port Size = 8 bit */ \
+                               | BR_MS_FCM             /* MSEL = FCM */ \
+                               | BR_V)                 /* valid */
+#define CONFIG_SYS_OR4_PRELIM  CONFIG_NAND_OR_PRELIM     /* NAND Options */
+#define CONFIG_SYS_BR5_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
+                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+                               | BR_PS_8               /* Port Size = 8 bit */ \
+                               | BR_MS_FCM             /* MSEL = FCM */ \
+                               | BR_V)                 /* valid */
+#define CONFIG_SYS_OR5_PRELIM  CONFIG_NAND_OR_PRELIM     /* NAND Options */
+
+#define CONFIG_SYS_BR6_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0xC0000)\
+                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+                               | BR_PS_8               /* Port Size = 8 bit */ \
+                               | BR_MS_FCM             /* MSEL = FCM */ \
+                               | BR_V)                 /* valid */
+#define CONFIG_SYS_OR6_PRELIM  CONFIG_NAND_OR_PRELIM     /* NAND Options */
+
+
+
 /* Serial Port - controlled on board with jumper J8
  * open - index 2
  * shorted - index 1
@@ -455,7 +509,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 #define CONFIG_ENV_ADDR                0xfff80000
 #else
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE + 0x70000)
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
 #endif
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */