lart SA1100
dnp1110 SA1110
+Minkyu Kang <mk7.kang@samsung.com>
+
+ SMDKC100 ARM CORTEX-A8 (S5PC100 SoC)
+
-------------------------------------------------------------------------
Unknown / orphaned boards:
omap3_pandora \
omap3_zoom1 \
omap3_zoom2 \
+ smdkc100 \
"
#########################################################################
omap3_zoom2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
+smdkc100_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
+
#########################################################################
## XScale Systems
#########################################################################
--- /dev/null
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y := smdkc100.o
+COBJS-$(CONFIG_SAMSUNG_ONENAND) += onenand.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(SOBJS) $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# Copyright (C) 2008 # Samsung Elecgtronics
+# Kyungmin Park <kyungmin.park@samsung.com>
+#
+
+# On S5PC100 we use the 128 MiB OneDRAM bank at
+#
+# 0x30000000 to 0x35000000 (80MiB)
+# 0x38000000 to 0x40000000 (128MiB)
+#
+# On S5PC110 we use the 128 MiB OneDRAM bank at
+#
+# 0x30000000 to 0x35000000 (80MiB)
+# 0x40000000 to 0x48000000 (128MiB)
+#
+TEXT_BASE = 0x34800000
--- /dev/null
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/power.h>
+
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ */
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+ .globl lowlevel_init
+lowlevel_init:
+ mov r9, lr
+
+ /* r5 has always zero */
+ mov r5, #0
+
+ ldr r8, =S5PC100_GPIO_BASE
+
+ /* Disable Watchdog */
+ ldr r0, =S5PC100_WATCHDOG_BASE @0xEA200000
+ orr r0, r0, #0x0
+ str r5, [r0]
+
+#ifndef CONFIG_ONENAND_IPL
+ /* setting SRAM */
+ ldr r0, =S5PC100_SROMC_BASE
+ ldr r1, =0x9
+ str r1, [r0]
+#endif
+
+ /* S5PC100 has 3 groups of interrupt sources */
+ ldr r0, =S5PC100_VIC0_BASE @0xE4000000
+ ldr r1, =S5PC100_VIC1_BASE @0xE4000000
+ ldr r2, =S5PC100_VIC2_BASE @0xE4000000
+
+ /* Disable all interrupts (VIC0, VIC1 and VIC2) */
+ mvn r3, #0x0
+ str r3, [r0, #0x14] @INTENCLEAR
+ str r3, [r1, #0x14] @INTENCLEAR
+ str r3, [r2, #0x14] @INTENCLEAR
+
+#ifndef CONFIG_ONENAND_IPL
+ /* Set all interrupts as IRQ */
+ str r5, [r0, #0xc] @INTSELECT
+ str r5, [r1, #0xc] @INTSELECT
+ str r5, [r2, #0xc] @INTSELECT
+
+ /* Pending Interrupt Clear */
+ str r5, [r0, #0xf00] @INTADDRESS
+ str r5, [r1, #0xf00] @INTADDRESS
+ str r5, [r2, #0xf00] @INTADDRESS
+#endif
+
+#ifndef CONFIG_ONENAND_IPL
+ /* for UART */
+ bl uart_asm_init
+
+ /* for TZPC */
+ bl tzpc_asm_init
+#endif
+
+#ifdef CONFIG_ONENAND_IPL
+ /* init system clock */
+ bl system_clock_init
+
+ bl mem_ctrl_asm_init
+
+ /* Wakeup support. Don't know if it's going to be used, untested. */
+ ldr r0, =S5PC100_RST_STAT
+ ldr r1, [r0]
+ bic r1, r1, #0xfffffff7
+ cmp r1, #0x8
+ beq wakeup_reset
+#endif
+
+1:
+ mov lr, r9
+ mov pc, lr
+
+#ifdef CONFIG_ONENAND_IPL
+wakeup_reset:
+
+ /* Clear wakeup status register */
+ ldr r0, =S5PC100_WAKEUP_STAT
+ ldr r1, [r0]
+ str r1, [r0]
+
+ /* Load return address and jump to kernel */
+ ldr r0, =S5PC100_INFORM0
+
+ /* r1 = physical address of s5pc100_cpu_resume function */
+ ldr r1, [r0]
+
+ /* Jump to kernel (sleep.S) */
+ mov pc, r1
+ nop
+ nop
+#endif
+
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+system_clock_init:
+ ldr r8, =S5PC1XX_CLOCK_BASE @ 0xE0100000
+
+ /* Set Clock divider */
+ ldr r1, =0x00011110
+ str r1, [r8, #0x304]
+ ldr r1, =0x1
+ str r1, [r8, #0x308]
+ ldr r1, =0x00011301
+ str r1, [r8, #0x300]
+
+ /* Set Lock Time */
+ ldr r1, =0xe10 @ Locktime : 0xe10 = 3600
+ str r1, [r8, #0x000] @ APLL_LOCK
+ str r1, [r8, #0x004] @ MPLL_LOCK
+ str r1, [r8, #0x008] @ EPLL_LOCK
+ str r1, [r8, #0x00C] @ HPLL_LOCK
+
+ /* APLL_CON */
+ ldr r1, =0x81bc0400 @ SDIV 0, PDIV 4, MDIV 444 (1332MHz)
+ str r1, [r8, #0x100]
+ /* MPLL_CON */
+ ldr r1, =0x80590201 @ SDIV 1, PDIV 2, MDIV 89 (267MHz)
+ str r1, [r8, #0x104]
+ /* EPLL_CON */
+ ldr r1, =0x80870303 @ SDIV 3, PDIV 3, MDIV 135 (67.5MHz)
+ str r1, [r8, #0x108]
+ /* HPLL_CON */
+ ldr r1, =0x80600603
+ str r1, [r8, #0x10C]
+
+ /* Set Source Clock */
+ ldr r1, =0x1111 @ A, M, E, HPLL Muxing
+ str r1, [r8, #0x200] @ CLK_SRC0
+
+ ldr r1, =0x1000001 @ Uart Clock & CLK48M Muxing
+ str r1, [r8, #0x204] @ CLK_SRC1
+
+ ldr r1, =0x9000 @ ARMCLK/4
+ str r1, [r8, #0x400] @ CLK_OUT
+
+ /* wait at least 200us to stablize all clock */
+ mov r2, #0x10000
+1: subs r2, r2, #1
+ bne 1b
+
+ mov pc, lr
+
+#ifndef CONFIG_ONENAND_IPL
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+ mov r0, r8
+ ldr r1, =0x22222222
+ str r1, [r0, #0x0] @ GPA0_CON
+ ldr r1, =0x00022222
+ str r1, [r0, #0x20] @ GPA1_CON
+
+ mov pc, lr
+
+/*
+ * tzpc_asm_init: Initialize TZPC
+ */
+tzpc_asm_init:
+ ldr r0, =0xE3800000
+ mov r1, #0x0
+ str r1, [r0]
+ mov r1, #0xff
+ str r1, [r0, #0x804]
+ str r1, [r0, #0x810]
+
+ ldr r0, =0xE2800000
+ str r1, [r0, #0x804]
+ str r1, [r0, #0x810]
+ str r1, [r0, #0x81C]
+
+ ldr r0, =0xE2900000
+ str r1, [r0, #0x804]
+ str r1, [r0, #0x810]
+
+ mov pc, lr
+#endif
--- /dev/null
+/*
+ * Originates from Samsung's u-boot 1.1.6 port to S5PC1xx
+ *
+ * Copyright (C) 2009 Samsung Electrnoics
+ * Inki Dae <inki.dae@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+ .globl mem_ctrl_asm_init
+mem_ctrl_asm_init:
+ ldr r6, =S5PC100_DMC_BASE @ 0xE6000000
+
+ /* DLL parameter setting */
+ ldr r1, =0x50101000
+ str r1, [r6, #0x018] @ PHYCONTROL0
+ ldr r1, =0xf4
+ str r1, [r6, #0x01C] @ PHYCONTROL1
+ ldr r1, =0x0
+ str r1, [r6, #0x020] @ PHYCONTROL2
+
+ /* DLL on */
+ ldr r1, =0x50101002
+ str r1, [r6, #0x018] @ PHYCONTROL0
+
+ /* DLL start */
+ ldr r1, =0x50101003
+ str r1, [r6, #0x018] @ PHYCONTROL0
+
+ /* Force value locking for DLL off */
+ str r1, [r6, #0x018] @ PHYCONTROL0
+
+ /* DLL off */
+ ldr r1, =0x50101001
+ str r1, [r6, #0x018] @ PHYCONTROL0
+
+ /* auto refresh off */
+ ldr r1, =0xff001010
+ str r1, [r6, #0x000] @ CONCONTROL
+
+ /*
+ * Burst Length 4, 2 chips, 32-bit, LPDDR
+ * OFF: dynamic self refresh, force precharge, dynamic power down off
+ */
+ ldr r1, =0x00212100
+ str r1, [r6, #0x004] @ MEMCONTROL
+
+ /*
+ * Note:
+ * If Bank0 has OneDRAM we place it at 0x2800'0000
+ * So finally Bank1 should address start at at 0x2000'0000
+ */
+ mov r4, #0x0
+
+swap_memory:
+ /*
+ * Bank0
+ * 0x30 -> 0x30000000
+ * 0xf8 -> 0x37FFFFFF
+ * [15:12] 0: Linear
+ * [11:8 ] 2: 9 bits
+ * [ 7:4 ] 2: 14 bits
+ * [ 3:0 ] 2: 4 banks
+ */
+ ldr r1, =0x30f80222
+ /* if r4 is 1, swap the bank */
+ cmp r4, #0x1
+ orreq r1, r1, #0x08000000
+ str r1, [r6, #0x008] @ MEMCONFIG0
+
+ /*
+ * Bank1
+ * 0x38 -> 0x38000000
+ * 0xf8 -> 0x3fFFFFFF
+ * [15:12] 0: Linear
+ * [11:8 ] 2: 9 bits
+ * [ 7:4 ] 2: 14 bits
+ * [ 3:0 ] 2: 4 banks
+ */
+ ldr r1, =0x38f80222
+ /* if r4 is 1, swap the bank */
+ cmp r4, #0x1
+ biceq r1, r1, #0x08000000
+ str r1, [r6, #0x00c] @ MEMCONFIG1
+
+ ldr r1, =0x20000000
+ str r1, [r6, #0x014] @ PRECHCONFIG
+
+ /*
+ * FIXME: Please verify these values
+ * 7.8us * 166MHz %LE %LONG1294(0x50E)
+ * 7.8us * 133MHz %LE %LONG1038(0x40E),
+ * 7.8us * 100MHz %LE %LONG780(0x30C),
+ * 7.8us * 20MHz %LE %LONG156(0x9C),
+ * 7.8us * 10MHz %LE %LONG78(0x4E)
+ */
+ ldr r1, =0x0000050e
+ str r1, [r6, #0x030] @ TIMINGAREF
+
+ /* 166 MHz */
+ ldr r1, =0x0c233287
+ str r1, [r6, #0x034] @ TIMINGROW
+
+ /* twtr=3 twr=2 trtp=3 cl=3 wl=3 rl=3 */
+ ldr r1, =0x32330303
+ str r1, [r6, #0x038] @ TIMINGDATA
+
+ /* tfaw=4 sxsr=0x14 txp=0x14 tcke=3 tmrd=3 */
+ ldr r1, =0x04141433
+ str r1, [r6, #0x03C] @ TIMINGPOWER
+
+ /* chip0 Deselect */
+ ldr r1, =0x07000000
+ str r1, [r6, #0x010] @ DIRECTCMD
+
+ /* chip0 PALL */
+ ldr r1, =0x01000000
+ str r1, [r6, #0x010] @ DIRECTCMD
+
+ /* chip0 REFA */
+ ldr r1, =0x05000000
+ str r1, [r6, #0x010] @ DIRECTCMD
+ /* chip0 REFA */
+ str r1, [r6, #0x010] @ DIRECTCMD
+
+ /* chip0 MRS, CL%LE %LONG3, BL%LE %LONG4 */
+ ldr r1, =0x00000032
+ str r1, [r6, #0x010] @ DIRECTCMD
+
+ /* chip1 Deselect */
+ ldr r1, =0x07100000
+ str r1, [r6, #0x010] @ DIRECTCMD
+
+ /* chip1 PALL */
+ ldr r1, =0x01100000
+ str r1, [r6, #0x010] @ DIRECTCMD
+
+ /* chip1 REFA */
+ ldr r1, =0x05100000
+ str r1, [r6, #0x010] @ DIRECTCMD
+ /* chip1 REFA */
+ str r1, [r6, #0x010] @ DIRECTCMD
+
+ /* chip1 MRS, CL%LE %LONG3, BL%LE %LONG4 */
+ ldr r1, =0x00100032
+ str r1, [r6, #0x010] @ DIRECTCMD
+
+ /* auto refresh on */
+ ldr r1, =0xff002030
+ str r1, [r6, #0x000] @ CONCONTROL
+
+ /* PwrdnConfig */
+ ldr r1, =0x00100002
+ str r1, [r6, #0x028] @ PWRDNCONFIG
+
+ /* BL%LE %LONG */
+ ldr r1, =0xff212100
+ str r1, [r6, #0x004] @ MEMCONTROL
+
+
+ /* Try to test memory area */
+ cmp r4, #0x1
+ beq 1f
+
+ mov r4, #0x1
+ ldr r1, =0x37ffff00
+ str r4, [r1]
+ str r4, [r1, #0x4] @ dummy write
+ ldr r0, [r1]
+ cmp r0, r4
+ bne swap_memory
+
+1:
+ mov pc, lr
+
+ .ltorg
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/samsung_onenand.h>
+
+#include <onenand_uboot.h>
+
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+
+void onenand_board_init(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE;
+ struct samsung_onenand *onenand;
+ int value;
+
+ this->base = (void *)S5PC100_ONENAND_BASE;
+ onenand = (struct samsung_onenand *)this->base;
+
+ /* D0 Domain memory clock gating */
+ value = readl(&clk->gate_d01);
+ value &= ~(1 << 2); /* CLK_ONENANDC */
+ value |= (1 << 2);
+ writel(value, &clk->gate_d01);
+
+ value = readl(&clk->src0);
+ value &= ~(1 << 24); /* MUX_1nand: 0 from HCLKD0 */
+ value &= ~(1 << 20); /* MUX_HREF: 0 from FIN_27M */
+ writel(value, &clk->src0);
+
+ value = readl(&clk->div1);
+ value &= ~(3 << 16); /* PCLKD1_RATIO */
+ value |= (1 << 16);
+ writel(value, &clk->div1);
+
+ writel(ONENAND_MEM_RESET_COLD, &onenand->mem_reset);
+
+ while (!(readl(&onenand->int_err_stat) & RST_CMP))
+ continue;
+
+ writel(RST_CMP, &onenand->int_err_ack);
+
+ /*
+ * Access_Clock [2:0]
+ * 166 MHz, 134 Mhz : 3
+ * 100 Mhz, 60 Mhz : 2
+ */
+ writel(0x3, &onenand->acc_clock);
+
+ writel(INT_ERR_ALL, &onenand->int_err_mask);
+ writel(1 << 0, &onenand->int_pin_en); /* Enable */
+
+ value = readl(&onenand->int_err_mask);
+ value &= ~RDY_ACT;
+ writel(value, &onenand->int_err_mask);
+
+ s3c_onenand_init(mtd);
+}
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ gd->bd->bi_arch_number = MACH_TYPE_SMDKC100;
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
+
+ return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ printf("Board:\tSMDKC100\n");
+ return 0;
+}
+#endif
--- /dev/null
+
+Summary
+=======
+
+This README is about U-Boot support for SAMSUNG's ARM Cortex-A8 based S5PC1xx
+family of SoCs (S5PC100 [1] and S5PC110).
+
+Currently the following board is supported:
+
+* SMDKC100 [2]
+
+Toolchain
+=========
+
+While ARM Cortex-A8 support ARM v7 instruction set (-march=armv7a) we compile
+with -march=armv5 to allow more compilers to work. For U-Boot code this has
+no performance impact.
+
+Build
+=====
+
+* SMDKC100
+
+make smdkc100_config
+make
+
+
+Interfaces
+==========
+
+cpu
+
+To check SoC:
+
+ if (cpu_is_s5pc100())
+ printf("cpu is s5pc100\n");
+
+ or
+
+ if (cpu_is_s5pc110())
+ printf("cpu is s5pc110\n");
+
+gpio
+ not supported yet.
+
+Links
+=====
+
+[1] S5PC100:
+
+http://www.samsung.com/global/business/semiconductor/productInfo.do?
+fmly_id=229&partnum=S5PC100
+
+[2] SMDKC100:
+
+http://meritech.co.kr/eng/products/product_view.php?num=28
--- /dev/null
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * HeungJun Kim <riverful.kim@samsung.com>
+ * Inki Dae <inki.dae@samsung.com>
+ *
+ * Configuation settings for the SAMSUNG SMDKC100 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
+#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
+#define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */
+#define CONFIG_S5PC100 1 /* which is in a S5PC100 */
+#define CONFIG_SMDKC100 1 /* working with SMDKC100 */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+
+#define CONFIG_L2_OFF
+
+/* input clock of PLL: SMDKC100 has 12MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 12000000
+
+/* DRAM Base */
+#define CONFIG_SYS_SDRAM_BASE 0x30000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/*
+ * Size of malloc() pool
+ * 1MB = 0x100000, 0x100000 = 1024 * 1024
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for */
+ /* initial data */
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL0 1 /* use SERIAL 0 on SMDKC100 */
+#define CONFIG_SERIAL_MULTI 1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE 115200
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_NET
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_ONENAND
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MTDPARTS
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#define MTDIDS_DEFAULT "onenand0=s3c-onenand"
+#define MTDPARTS_DEFAULT "mtdparts=s3c-onenand:256k(bootloader)"\
+ ",128k@0x40000(params)"\
+ ",3m@0x60000(kernel)"\
+ ",16m@0x360000(test)"\
+ ",-(UBI)"
+
+#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+
+#define CONFIG_BOOTCOMMAND "run ubifsboot"
+
+#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \
+ " console=ttySAC0,115200n8" \
+ " mem=128M"
+
+#define CONFIG_COMMON_BOOT "console=ttySAC0,115200n8" \
+ " mem=128M " \
+ " " MTDPARTS_DEFAULT
+
+#define CONFIG_BOOTARGS "root=/dev/mtdblock5 ubi.mtd=4" \
+ " rootfstype=cramfs " CONFIG_COMMON_BOOT
+
+#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x40000;" \
+ " onenand write 0x32008000 0x0 0x40000\0"
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_UPDATEB \
+ "updatek=" \
+ "onenand erase 0x60000 0x300000;" \
+ "onenand write 0x31008000 0x60000 0x300000\0" \
+ "updateu=" \
+ "onenand erase block 147-4095;" \
+ "onenand write 0x32000000 0x1260000 0x8C0000\0" \
+ "bootk=" \
+ "onenand read 0x30007FC0 0x60000 0x300000;" \
+ "bootm 0x30007FC0\0" \
+ "flashboot=" \
+ "set bootargs root=/dev/mtdblock${bootblock} " \
+ "rootfstype=${rootfstype} " \
+ "ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT ";" \
+ "run bootk\0" \
+ "ubifsboot=" \
+ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
+ " ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \
+ "run bootk\0" \
+ "boottrace=setenv opts initcall_debug; run bootcmd\0" \
+ "android=" \
+ "set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock} " \
+ "rootfstype=ubifs init=/init.sh " CONFIG_COMMON_BOOT "; " \
+ "run bootk\0" \
+ "nfsboot=" \
+ "set bootargs root=/dev/nfs ubi.mtd=${ubiblock} " \
+ "nfsroot=${nfsroot},nolock " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:" \
+ "${netmask}:nowplus:usb0:off " CONFIG_COMMON_BOOT "; " \
+ "run bootk\0" \
+ "ramboot=" \
+ "set bootargs " CONFIG_RAMDISK_BOOT \
+ " initrd=0x33000000,8M ramdisk=8192\0" \
+ "rootfstype=cramfs\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "meminfo=mem=128M\0" \
+ "nfsroot=/nfsroot/arm\0" \
+ "bootblock=5\0" \
+ "ubiblock=4\0" \
+ "ubi=enabled"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "SMDKC100 # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5e00000)
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
+
+#define CONFIG_SYS_HZ 1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */
+
+/* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE (128 << 20) /* 0x8000000, 128 MB Bank #1 */
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH 1
+
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */
+#define CONFIG_IDENT_STRING " for SMDKC100"
+
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000)
+#define CONFIG_ENABLE_MMU
+#endif
+
+#ifdef CONFIG_ENABLE_MMU
+#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000
+#else
+#define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE
+#endif
+
+/*-----------------------------------------------------------------------
+ * Boot configuration
+ */
+#define CONFIG_ENV_IS_IN_ONENAND 1
+#define CONFIG_ENV_SIZE (128 << 10) /* 128KiB, 0x20000 */
+#define CONFIG_ENV_ADDR (256 << 10) /* 256KiB, 0x40000 */
+#define CONFIG_ENV_OFFSET (256 << 10) /* 256KiB, 0x40000 */
+
+#define CONFIG_USE_ONENAND_BOARD_INIT
+#define CONFIG_SAMSUNG_ONENAND 1
+#define CONFIG_SYS_ONENAND_BASE 0xE7100000
+
+#define CONFIG_DOS_PARTITION 1
+
+#endif /* __CONFIG_H */
projects / u-boot / commitdiff