Renesas Solutions R7780MP is a reference board on SH7780.
This board has serial, 10/100 base Ethernet deivice, CF slot
and VGA devices. This board can set extension board.
Extension board has 10/100/1000 base Ethernet device, PCI slot,
S-ATA, iDVR slot.
Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
ms7750se \
ms7722se \
Migo-R \
+ r7780mp \
"
LIST_sh3=" \
@echo "#define CONFIG_MIGO_R 1" >> include/config.h
@./mkconfig -a $(@:_config=) sh sh4 MigoR
+r7780mp_config: unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_R7780MP 1" >> include/config.h
+ @./mkconfig -a $(@:_config=) sh sh4 r7780mp
+
#########################################################################
#########################################################################
#########################################################################
--- /dev/null
+#
+# Copyright (C) 2007,2008 Nobuhiro Iwamatsu
+#
+# board/r7780mp/Makefile
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := r7780mp.o
+SOBJS := lowlevel_init.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- /dev/null
+#
+# Copyright (C) 2007,2008 Nobuhiro Iwamatsu
+#
+# board/r77870mp/config.mk
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+
+TEXT_BASE = 0x0FFC0000
--- /dev/null
+/*
+ * Copyright (C) 2007,2008 Nobuhiro Iwamatsu
+ *
+ * u-boot/board/r7780mp/lowlevel_init.S
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+
+/*
+ * Board specific low level init code, called _very_ early in the
+ * startup sequence. Relocation to SDRAM has not happened yet, no
+ * stack is available, bss section has not been initialised, etc.
+ *
+ * (Note: As no stack is available, no subroutines can be called...).
+ */
+
+ .global lowlevel_init
+
+ .text
+ .align 2
+
+lowlevel_init:
+
+ mov.l CCR_A, r1 /* Address of Cache Control Register */
+ mov.l CCR_D, r0 /* Instruction Cache Invalidate */
+ mov.l r0, @r1
+
+ mov.l FRQCR_A, r1 /* Frequency control register */
+ mov.l FRQCR_D, r0
+ mov.l r0, @r1
+
+ /* pin_multi_setting */
+ mov.l BBG_PMMR_A,r1
+ mov.l BBG_PMMR_D_PMSR1,r0
+ mov.l r0,@r1
+
+ mov.l BBG_PMSR1_A,r1
+ mov.l BBG_PMSR1_D,r0
+ mov.l r0,@r1
+
+ mov.l BBG_PMMR_A,r1
+ mov.l BBG_PMMR_D_PMSR2,r0
+ mov.l r0,@r1
+
+ mov.l BBG_PMSR2_A,r1
+ mov.l BBG_PMSR2_D,r0
+ mov.l r0,@r1
+
+ mov.l BBG_PMMR_A,r1
+ mov.l BBG_PMMR_D_PMSR3,r0
+ mov.l r0,@r1
+
+ mov.l BBG_PMSR3_A,r1
+ mov.l BBG_PMSR3_D,r0
+ mov.l r0,@r1
+
+ mov.l BBG_PMMR_A,r1
+ mov.l BBG_PMMR_D_PMSR4,r0
+ mov.l r0,@r1
+
+ mov.l BBG_PMSR4_A,r1
+ mov.l BBG_PMSR4_D,r0
+ mov.l r0,@r1
+
+ mov.l BBG_PMMR_A,r1
+ mov.l BBG_PMMR_D_PMSRG,r0
+ mov.l r0,@r1
+
+ mov.l BBG_PMSRG_A,r1
+ mov.l BBG_PMSRG_D,r0
+ mov.l r0,@r1
+
+ /* cpg_setting */
+ mov.l FRQCR_A,r1
+ mov.l FRQCR_D,r0
+ mov.l r0,@r1
+
+ mov.l DLLCSR_A,r1
+ mov.l DLLCSR_D,r0
+ mov.l r0,@r1
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ /* wait 200us */
+ mov.l REPEAT0_R3,r3
+ mov #0,r2
+repeat0:
+ add #1,r2
+ cmp/hs r3,r2
+ bf repeat0
+ nop
+
+ /* bsc_setting */
+ mov.l MMSELR_A,r1
+ mov.l MMSELR_D,r0
+ mov.l r0,@r1
+
+ mov.l BCR_A,r1
+ mov.l BCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS0BCR_A,r1
+ mov.l CS0BCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS1BCR_A,r1
+ mov.l CS1BCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS2BCR_A,r1
+ mov.l CS2BCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS4BCR_A,r1
+ mov.l CS4BCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS5BCR_A,r1
+ mov.l CS5BCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS6BCR_A,r1
+ mov.l CS6BCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS0WCR_A,r1
+ mov.l CS0WCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS1WCR_A,r1
+ mov.l CS1WCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS2WCR_A,r1
+ mov.l CS2WCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS4WCR_A,r1
+ mov.l CS4WCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS5WCR_A,r1
+ mov.l CS5WCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS6WCR_A,r1
+ mov.l CS6WCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS5PCR_A,r1
+ mov.l CS5PCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS6PCR_A,r1
+ mov.l CS6PCR_D,r0
+ mov.l r0,@r1
+
+ /* ddr_setting */
+ /* wait 200us */
+ mov.l REPEAT0_R3,r3
+ mov #0,r2
+repeat1:
+ add #1,r2
+ cmp/hs r3,r2
+ bf repeat1
+ nop
+
+ mov.l MIM_U_A,r0
+ mov.l MIM_U_D,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ mov.l MIM_L_A,r0
+ mov.l MIM_L_D0,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ mov.l STR_L_A,r0
+ mov.l STR_L_D,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ mov.l SDR_L_A,r0
+ mov.l SDR_L_D,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ nop
+ nop
+ nop
+ nop
+
+ mov.l SCR_L_A,r0
+ mov.l SCR_L_D0,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ mov.l SCR_L_A,r0
+ mov.l SCR_L_D1,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ nop
+ nop
+ nop
+
+ mov.l EMRS_A,r0
+ mov.l EMRS_D,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ nop
+ nop
+ nop
+
+ mov.l MRS1_A,r0
+ mov.l MRS1_D,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ nop
+ nop
+ nop
+
+ mov.l SCR_L_A,r0
+ mov.l SCR_L_D2,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ nop
+ nop
+ nop
+
+ mov.l SCR_L_A,r0
+ mov.l SCR_L_D3,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ nop
+ nop
+ nop
+
+ mov.l SCR_L_A,r0
+ mov.l SCR_L_D4,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ nop
+ nop
+ nop
+
+ mov.l MRS2_A,r0
+ mov.l MRS2_D,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ nop
+ nop
+ nop
+
+ mov.l SCR_L_A,r0
+ mov.l SCR_L_D5,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ /* wait 200us */
+ mov.l REPEAT0_R1,r3
+ mov #0,r2
+repeat2:
+ add #1,r2
+ cmp/hs r3,r2
+ bf repeat2
+
+ synco
+
+ mov.l MIM_L_A,r0
+ mov.l MIM_L_D1,r1
+ synco
+ mov.l r1,@r0
+ synco
+
+ rts
+ nop
+ .align 4
+
+RWTCSR_D_1: .word 0xA507
+RWTCSR_D_2: .word 0xA507
+RWTCNT_D: .word 0x5A00
+
+BBG_PMMR_A: .long 0xFF800010
+BBG_PMSR1_A: .long 0xFF800014
+BBG_PMSR2_A: .long 0xFF800018
+BBG_PMSR3_A: .long 0xFF80001C
+BBG_PMSR4_A: .long 0xFF800020
+BBG_PMSRG_A: .long 0xFF800024
+
+BBG_PMMR_D_PMSR1: .long 0xffffbffd
+BBG_PMSR1_D: .long 0x00004002
+BBG_PMMR_D_PMSR2: .long 0xfc21a7ff
+BBG_PMSR2_D: .long 0x03de5800
+BBG_PMMR_D_PMSR3: .long 0xfffffff8
+BBG_PMSR3_D: .long 0x00000007
+BBG_PMMR_D_PMSR4: .long 0xdffdfff9
+BBG_PMSR4_D: .long 0x20020006
+BBG_PMMR_D_PMSRG: .long 0xffffffff
+BBG_PMSRG_D: .long 0x00000000
+
+FRQCR_A: .long FRQCR
+DLLCSR_A: .long 0xffc40010
+FRQCR_D: .long 0x40233035
+DLLCSR_D: .long 0x00000000
+
+/* for DDR-SDRAM */
+MIM_U_A: .long MIM_1
+MIM_L_A: .long MIM_2
+SCR_U_A: .long SCR_1
+SCR_L_A: .long SCR_2
+STR_U_A: .long STR_1
+STR_L_A: .long STR_2
+SDR_U_A: .long SDR_1
+SDR_L_A: .long SDR_2
+
+EMRS_A: .long 0xFEC02000
+MRS1_A: .long 0xFEC00B08
+MRS2_A: .long 0xFEC00308
+
+MIM_U_D: .long 0x00004000
+MIM_L_D0: .long 0x03e80009
+MIM_L_D1: .long 0x03e80209
+SCR_L_D0: .long 0x3
+SCR_L_D1: .long 0x2
+SCR_L_D2: .long 0x2
+SCR_L_D3: .long 0x4
+SCR_L_D4: .long 0x4
+SCR_L_D5: .long 0x0
+STR_L_D: .long 0x000f0000
+SDR_L_D: .long 0x00000400
+EMRS_D: .long 0x0
+MRS1_D: .long 0x0
+MRS2_D: .long 0x0
+
+/* Cache Controller */
+CCR_A: .long CCR
+MMUCR_A: .long MMUCR
+RWTCNT_A: .long WTCNT
+
+CCR_D: .long 0x0000090b
+CCR_D_2: .long 0x00000103
+MMUCR_D: .long 0x00000004
+MSTPCR0_D: .long 0x00001001
+MSTPCR2_D: .long 0xffffffff
+
+/* local Bus State Controller */
+MMSELR_A: .long MMSELR
+BCR_A: .long BCR
+CS0BCR_A: .long CS0BCR
+CS1BCR_A: .long CS1BCR
+CS2BCR_A: .long CS2BCR
+CS4BCR_A: .long CS4BCR
+CS5BCR_A: .long CS5BCR
+CS6BCR_A: .long CS6BCR
+CS0WCR_A: .long CS0WCR
+CS1WCR_A: .long CS1WCR
+CS2WCR_A: .long CS2WCR
+CS4WCR_A: .long CS4WCR
+CS5WCR_A: .long CS5WCR
+CS6WCR_A: .long CS6WCR
+CS5PCR_A: .long CS5PCR
+CS6PCR_A: .long CS6PCR
+
+MMSELR_D: .long 0xA5A50003
+BCR_D: .long 0x00000000
+CS0BCR_D: .long 0x77777770
+CS1BCR_D: .long 0x77777670
+CS2BCR_D: .long 0x77777770
+CS4BCR_D: .long 0x77777770
+CS5BCR_D: .long 0x77777670
+CS6BCR_D: .long 0x77777770
+CS0WCR_D: .long 0x00020006
+CS1WCR_D: .long 0x00232304
+CS2WCR_D: .long 0x7777770F
+CS4WCR_D: .long 0x7777770F
+CS5WCR_D: .long 0x00101006
+CS6WCR_D: .long 0x77777703
+CS5PCR_D: .long 0x77000000
+CS6PCR_D: .long 0x77000000
+
+REPEAT0_R3: .long 0x00002000
+REPEAT0_R1: .long 0x0000200
--- /dev/null
+/*
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ide.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include "r7780mp.h"
+
+int checkboard(void)
+{
+#if defined(CONFIG_R7780MP)
+ puts("BOARD: Renesas Solutions R7780MP\n");
+#else
+ puts("BOARD: Renesas Solutions R7780RP\n");
+#endif
+ return 0;
+}
+
+int board_init(void)
+{
+ /* SCIF Enable */
+ *(vu_short*)PHCR = 0x0000;
+
+ /* Disable Control-C */
+ disable_ctrlc(1);
+
+ return 0;
+}
+
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_memstart = CFG_SDRAM_BASE;
+ gd->bd->bi_memsize = CFG_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+ return 0;
+}
+
+void led_set_state (unsigned short value)
+{
+
+}
+
+void ide_set_reset (int idereset)
+{
+ /* if reset = 1 IDE reset will be asserted */
+ if (idereset){
+ (*(vu_short *)FPGA_CFCTL) = 0x432;
+#if defined(CONFIG_R7780MP)
+ (*(vu_short *)FPGA_CFPOW) |= 0x01;
+#else
+ (*(vu_short *)FPGA_CFPOW) |= 0x02;
+#endif
+ (*(vu_short *)FPGA_CFCDINTCLR) = 0x01;
+ }
+}
+
+#if defined(CONFIG_PCI)
+static struct pci_controller hose;
+void pci_init_board(void)
+{
+ pci_sh7780_init( &hose );
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
+ *
+ * u-boot/board/r7780mp/r7780mp.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _BOARD_R7780MP_R7780MP_H_
+#define _BOARD_R7780MP_R7780MP_H_
+
+/* R7780MP's FPGA register map */
+#define FPGA_BASE 0xa4000000
+#define FPGA_IRLMSK (FPGA_BASE + 0x00)
+#define FPGA_IRLMON (FPGA_BASE + 0x02)
+#define FPGA_IRLPRI1 (FPGA_BASE + 0x04)
+#define FPGA_IRLPRI2 (FPGA_BASE + 0x06)
+#define FPGA_IRLPRI3 (FPGA_BASE + 0x08)
+#define FPGA_IRLPRI4 (FPGA_BASE + 0x0A)
+#define FPGA_RSTCTL (FPGA_BASE + 0x0C)
+#define FPGA_PCIBD (FPGA_BASE + 0x0E)
+#define FPGA_PCICD (FPGA_BASE + 0x10)
+#define FPGA_EXTGIO (FPGA_BASE + 0x16)
+#define FPGA_IVDRMON (FPGA_BASE + 0x18)
+#define FPGA_IVDRCR (FPGA_BASE + 0x1A)
+#define FPGA_OBLED (FPGA_BASE + 0x1C)
+#define FPGA_OBSW (FPGA_BASE + 0x1E)
+#define FPGA_TPCTL (FPGA_BASE + 0x100)
+#define FPGA_TPDCKCTL (FPGA_BASE + 0x102)
+#define FPGA_TPCLR (FPGA_BASE + 0x104)
+#define FPGA_TPXPOS (FPGA_BASE + 0x106)
+#define FPGA_TPYPOS (FPGA_BASE + 0x108)
+#define FPGA_DBSW (FPGA_BASE + 0x200)
+#define FPGA_VERSION (FPGA_BASE + 0x700)
+#define FPGA_CFCTL (FPGA_BASE + 0x300)
+#define FPGA_CFPOW (FPGA_BASE + 0x302)
+#define FPGA_CFCDINTCLR (FPGA_BASE + 0x304)
+#define FPGA_PMR (FPGA_BASE + 0x900)
+
+#endif /* _BOARD_R7780RP_R7780RP_H_ */
--- /dev/null
+/*
+ * Copyrigth (c) 2007,2008
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+ /*
+ Base address of internal SDRAM is 0x0C000000.
+ Although size of SDRAM can be either 16 or 32 MBytes,
+ we assume 16 MBytes (ie ignore upper half if the full
+ 32 MBytes is present).
+
+ NOTE: This address must match with the definition of
+ TEXT_BASE in config.mk (in this directory).
+
+ */
+ . = 0x08000000 + (128*1024*1024) - (256*1024);
+
+ PROVIDE (reloc_dst = .);
+
+ PROVIDE (_ftext = .);
+ PROVIDE (_fcode = .);
+ PROVIDE (_start = .);
+
+ .text :
+ {
+ cpu/sh4/start.o (.text)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenv)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenvr)
+ . = ALIGN(8192);
+ *(.text)
+ . = ALIGN(4);
+ } =0xFF
+ PROVIDE (_ecode = .);
+ .rodata :
+ {
+ *(.rodata)
+ . = ALIGN(4);
+ }
+ PROVIDE (_etext = .);
+
+
+ PROVIDE (_fdata = .);
+ .data :
+ {
+ *(.data)
+ . = ALIGN(4);
+ }
+ PROVIDE (_edata = .);
+
+ PROVIDE (_fgot = .);
+ .got :
+ {
+ *(.got)
+ . = ALIGN(4);
+ }
+ PROVIDE (_egot = .);
+
+ PROVIDE (__u_boot_cmd_start = .);
+ .u_boot_cmd :
+ {
+ *(.u_boot_cmd)
+ . = ALIGN(4);
+ }
+ PROVIDE (__u_boot_cmd_end = .);
+
+ PROVIDE (reloc_dst_end = .);
+ /* _reloc_dst_end = .; */
+
+ PROVIDE (bss_start = .);
+ PROVIDE (__bss_start = .);
+ .bss :
+ {
+ *(.bss)
+ . = ALIGN(4);
+ }
+ PROVIDE (bss_end = .);
+
+ PROVIDE (_end = .);
+}
U-Boot for Renesas SuperH
- Last update 08/10/2007 by Nobuhiro Iwamatsu
+ Last update 01/18/2008 by Nobuhiro Iwamatsu
================================================================================
0. What's this?
2. Supported CPUs
2.1. Renesas SH7750/SH7750R
+ This CPU has the SH4 core.
+
2.2. Renesas SH7722
+ This CPU has the SH4AL-DSP core.
+
+ 2.3. Renesas SH7720
+ This CPU has the SH3 core.
+
+ 2.4. Renesas SH7710/SH7712
+ This CPU has the SH3-DSP core and Ethernet controller.
+
+ 2.5. Renesas SH7780
+ This CPU has the SH4A core.
================================================================================
3. Supported Boards
3.1. Hitachi UL MS7750SE01/MS7750RSE01
Board specific code is in board/ms7750se
To use this board, type "make ms7750se_config".
+ Support devices are :
+ - SCIF
+ - SDRAM
+ - NOR Flash
+ - Marubun PCMCIA
3.2. Hitachi UL MS7722SE01
Board specific code is in board/ms7722se
To use this board, type "make ms7722se_config".
+ Support devices are :
+ - SCIF
+ - SDRAM
+ - NOR Flash
+ - Marubun PCMCIA
+ - SMC91x ethernet
+
+ 3.2. Hitachi UL MS7720ERP01
+ Board specific code is in board/ms7720se
+ To use this board, type "make ms7720se_config".
+ Support devices are :
+ - SCIF
+ - SDRAM
+ - NOR Flash
+ - Marubun PCMCIA
+
+ 3.3. Renesas R7780MP
+ Board specific code is in board/r7780mp
+ To use this board, type "make r7780mp_config".
+ Support devices are :
+ - SCIF
+ - DDR-SDRAM
+ - NOR Flash
+ - Compact Flash
+ - ASIX ethernet
+ - SH7780 PCI bridge
+ - RTL8110 ethernet
** README **
In SuperH, S-record and binary of made u-boot work on the memory.
5. Future
I plan to support the following CPUs and boards.
5.1. CPUs
- - SH7710/SH7712 (SH3)
- - SH7780(SH4)
+ - SH7751R(SH4)
- SH7785(SH4)
5.2. Boards
- Many boards ;-)
================================================================================
-Copyright (c) 2007
+Copyright (c) 2007,2008
Nobuhiro Iwamatsu <iwamatsu@nigaur.org>
--- /dev/null
+/*
+ * Configuation settings for the Renesas R7780MP board
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __R7780RP_H
+#define __R7780RP_H
+
+#undef DEBUG
+#define CONFIG_SH 1
+#define CONFIG_SH4A 1
+#define CONFIG_CPU_SH7780 1
+#define CONFIG_R7780MP 1
+#define __LITTLE_ENDIAN 1
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+
+#define CFG_SCIF_CONSOLE 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_CONS_SCIF0 1
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "console=ttySC0,115200"
+#define CONFIG_ENV_OVERWRITE 1
+
+/* check for keypress on bootdelay==0 */
+/*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
+
+/* Network setting */
+#define CONFIG_NETMASK 255.0.0.0
+#define CONFIG_IPADDR 10.0.192.82
+#define CONFIG_SERVERIP 10.0.0.1
+#define CONFIG_GATEWAYIP 10.0.0.1
+
+#define CFG_SDRAM_BASE (0x08000000)
+#define CFG_SDRAM_SIZE (128 * 1024 * 1024)
+
+#define CFG_LONGHELP
+#define CFG_PROMPT "=> "
+#define CFG_CBSIZE 256
+#define CFG_PBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_BARGSIZE 512
+/* List of legal baudrate settings for this board */
+#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
+
+#define CFG_MEMTEST_START (CFG_SDRAM_BASE)
+#define CFG_MEMTEST_END (TEXT_BASE - 0x100000)
+
+/* NOR Flash (S29PL127J60TFI130) */
+#define CFG_FLASH_BASE (0xA0000000)
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
+#define CFG_MAX_FLASH_BANKS (2)
+#define CFG_MAX_FLASH_SECT 270
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\
+ CFG_FLASH_BASE + 0x100000,\
+ CFG_FLASH_BASE + 0x400000,\
+ CFG_FLASH_BASE + 0x700000, }
+
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024)
+/* Address of u-boot image in Flash */
+#define CFG_MONITOR_BASE (CFG_FLASH_BASE)
+#define CFG_MONITOR_LEN (112 * 1024)
+/* Size of DRAM reserved for malloc() use */
+#define CFG_MALLOC_LEN (256 * 1024)
+
+/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_SIZE (256)
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+#define CFG_RX_ETH_BUFFER (8)
+
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef CFG_FLASH_CFI_BROKEN_TABLE
+#undef CFG_FLASH_QUIET_TEST
+/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_EMPTY_INFO
+
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE (16 * 1024)
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_FLASH_ERASE_TOUT 120000
+#define CFG_FLASH_WRITE_TOUT 500
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 33333333
+#define TMU_CLK_DIVIDER 4
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+/* PCI Controller */
+#if defined(CONFIG_CMD_PCI)
+#define CONFIG_PCI
+#define CONFIG_SH4_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW 1
+#define __io
+#define __mem_pci
+
+#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
+
+#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */
+#endif /* CONFIG_CMD_PCI */
+
+#if defined(CONFIG_CMD_NET)
+/* #define CONFIG_NET_MULTI
+ #define CONFIG_RTL8169 */
+/* AX88696L Support(NE2000 base chip) */
+#define CONFIG_DRIVER_NE2000
+#define CONFIG_DRIVER_AX88796L
+#define CONFIG_DRIVER_NE2000_BASE 0xA4100000
+#endif
+
+/* Compact flash Support */
+#if defined(CONFIG_CMD_IDE)
+#define CONFIG_IDE_RESET 1
+#define CFG_PIO_MODE 1
+#define CFG_IDE_MAXBUS 1 /* IDE bus */
+#define CFG_IDE_MAXDEVICE 1
+#define CFG_ATA_BASE_ADDR 0xb4000000
+#define CFG_ATA_STRIDE 2 /* 1bit shift */
+#define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */
+#define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */
+#define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */
+#endif /* CONFIG_CMD_IDE */
+
+#endif /* __R7780RP_H */
projects / u-boot / commitdiff