CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0403
CONFIG_G_DNL_PRODUCT_NUM=0xbd00
+CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
CONFIG_LZO=y
CONFIG_OF_LIBFDT=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
CONFIG_LZO=y
CONFIG_OF_LIBFDT=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_G_DNL_MANUFACTURER="Siemens AG"
CONFIG_G_DNL_VENDOR_NUM=0x0908
CONFIG_G_DNL_PRODUCT_NUM=0x02d2
+CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_SYS_CONSOLE_BG_COL=0xff
CONFIG_SYS_CONSOLE_FG_COL=0x00
CONFIG_G_DNL_MANUFACTURER="Siemens AG"
CONFIG_G_DNL_VENDOR_NUM=0x0908
CONFIG_G_DNL_PRODUCT_NUM=0x02d2
+CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
CONFIG_G_DNL_MANUFACTURER="FSL"
CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
CONFIG_OF_LIBFDT=y
CONFIG_G_DNL_MANUFACTURER="FSL"
CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
CONFIG_OF_LIBFDT=y
Ethernet MAC address of the device-side (ie. local board's) MAC
address of the usb_ether interface
+config USBNET_HOST_ADDR
+ string "USB Gadget Ethernet host mac address"
+ default "de:ad:be:ef:00:00"
+ help
+ Ethernet MAC address of the host-side (ie. remote device's) MAC
+ address of the usb_ether interface
+
endif # USB_GADGET
#ifdef CONFIG_USB_MUSB_GADGET
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
#endif /* CONFIG_USB_MUSB_GADGET */
/*
#ifdef CONFIG_USB_MUSB_GADGET
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
#endif /* CONFIG_USB_MUSB_GADGET */
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
#define CONFIG_USB_ETH_SUBSET
#define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02"
#define CONFIG_EXTRA_ENV_SETTINGS \
"stdin=serial\0" \
"stdout=serial\0" \
#ifdef CONFIG_USB_MUSB_GADGET
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
#endif /* CONFIG_USB_MUSB_GADGET */
/* USB DRACO ID as default */
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
#define CONFIG_USBNET_DEV_ADDR "de:ad:be:af:00:01"
#endif
CONFIG_USBD_VENDORID
CONFIG_USBID_ADDR
CONFIG_USBNET_DEV_ADDR
-CONFIG_USBNET_HOST_ADDR
CONFIG_USBNET_MANUFACTURER
CONFIG_USBTTY
CONFIG_USB_AM35X