T: git git://git.denx.de/u-boot-imx.git
F: arch/arm/cpu/arm1136/mx*/
F: arch/arm/cpu/arm926ejs/mx*/
-F: arch/arm/cpu/arm926ejs/imx/
F: arch/arm/cpu/armv7/mx*/
F: arch/arm/cpu/armv7/vf610/
-F: arch/arm/cpu/imx-common/
+F: arch/arm/imx-common/
F: arch/arm/include/asm/arch-imx/
F: arch/arm/include/asm/arch-mx*/
F: arch/arm/include/asm/arch-vf610/
OBJDUMP = $(CROSS_COMPILE)objdump
AWK = awk
PERL = perl
-PYTHON = python
+PYTHON ?= python
DTC = dtc
CHECK = sparse
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
return 0;
}
+
+/* This is a dummy function on arc */
+int dram_init(void)
+{
+ return 0;
+}
source "arch/arm/imx-common/Kconfig"
+source "board/aries/m28evk/Kconfig"
+source "board/aries/m53evk/Kconfig"
source "board/bosch/shc/Kconfig"
source "board/BuR/brxre1/Kconfig"
source "board/BuR/brppt1/Kconfig"
source "board/compulab/cm_t335/Kconfig"
source "board/compulab/cm_t43/Kconfig"
source "board/creative/xfi3/Kconfig"
-source "board/denx/m28evk/Kconfig"
-source "board/denx/m53evk/Kconfig"
source "board/freescale/ls2080a/Kconfig"
source "board/freescale/ls2080aqds/Kconfig"
source "board/freescale/ls2080ardb/Kconfig"
select BOARD_LATE_INIT
select SUPPORT_SPL
+config TARGET_MX6LOGICPD
+ bool "Logic PD i.MX6 SOM"
+ select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
+ select DM
+ select DM_ETH
+ select DM_GPIO
+ select DM_I2C
+ select DM_MMC
+ select DM_PMIC
+ select DM_REGULATOR
+ select OF_CONTROL
+
config TARGET_MX6QARM2
bool "mx6qarm2"
config TARGET_MX6Q_ICORE_RQS
bool "Support Engicam i.Core RQS"
+ select BOARD_LATE_INIT
select MX6QDL
select OF_CONTROL
select DM
select SUPPORT_SPL
config TARGET_MX6UL_ISIOT
bool "Support Engicam Is.IoT MX6UL"
+ select BOARD_LATE_INIT
select MX6UL
select OF_CONTROL
select DM
source "board/kosagi/novena/Kconfig"
source "board/samtec/vining_2000/Kconfig"
source "board/liebherr/mccmon6/Kconfig"
+source "board/logicpd/imx6/Kconfig"
source "board/seco/Kconfig"
source "board/solidrun/mx6cuboxi/Kconfig"
source "board/technexion/pico-imx6ul/Kconfig"
num = readl(&scg1_regs->spllnum);
denom = readl(&scg1_regs->splldenom);
- return (infreq / pre_div) * (mult + num / denom);
+ infreq = infreq / pre_div;
+
+ return infreq * mult + infreq * num / denom;
case PLL_A7_APLL:
reg = readl(&scg1_regs->apllcsr);
num = readl(&scg1_regs->apllnum);
denom = readl(&scg1_regs->aplldenom);
- return (infreq / pre_div) * (mult + num / denom);
+ infreq = infreq / pre_div;
+
+ return infreq * mult + infreq * num / denom;
case PLL_USB:
reg = readl(&scg1_regs->upllcsr);
*/
#include <common.h>
+#include <fsl_ddr_sdram.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <asm/system.h>
__weak int dram_init(void)
{
- initdram();
+ fsl_initdram();
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
/* This will break-before-make MMU for DDR */
update_early_mmu_table();
dtb-$(CONFIG_MX53) += imx53-cx9020.dtb
dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \
+ imx6sl-evk.dtb \
imx6sll-evk.dtb \
imx6dl-icore.dtb \
imx6dl-icore-rqs.dtb \
imx6q-icore.dtb \
imx6q-icore-rqs.dtb \
+ imx6q-logicpd.dtb \
imx6sx-sabreauto.dtb \
imx6ul-geam-kit.dtb \
imx6ul-isiot-emmc.dtb \
dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
at91-sama5d2_xplained.dtb
+dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \
+ sama5d31ek.dtb \
+ sama5d33ek.dtb \
+ sama5d34ek.dtb \
+ sama5d35ek.dtb \
+ sama5d36ek.dtb \
+ sama5d36ek_cmp.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \
+ at91-sama5d3_xplained.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D4EK) += \
+ at91-sama5d4ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D4_XPLAINED) += \
+ at91-sama5d4_xplained.dtb
+
dtb-$(CONFIG_ARCH_BCM283X) += \
bcm2835-rpi-a-plus.dtb \
bcm2835-rpi-a.dtb \
--- /dev/null
+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ * Copyright (C) 2014 Atmel,
+ * 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+ model = "SAMA5D3 Xplained";
+ compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ u-boot,dm-pre-reloc;
+ stdout-path = &dbgu;
+ };
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ memory {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ mmc0: mmc@f0000000 {
+ u-boot,dm-pre-reloc;
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+ vmmc-supply = <&vcc_mmc0_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ mmc1: mmc@f8000000 {
+ u-boot,dm-pre-reloc;
+ vmmc-supply = <&vcc_3v3_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
+ status = "disabled";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi0: spi@f0004000 {
+ cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+ status = "okay";
+ };
+
+ can0: can@f000c000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ pinctrl-0 = <&pinctrl_i2c0_pu>;
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ status = "disabled";
+
+ regulators {
+ vcc_1v8_reg: DCDC_REG1 {
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_1v2_reg: DCDC_REG2 {
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_3v3_reg: DCDC_REG3 {
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddfuse_reg: LDO_REG1 {
+ regulator-name = "FUSE_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ vddana_reg: LDO_REG2 {
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ macb0: ethernet@f0028000 {
+ phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ethernet-phy@7 {
+ reg = <0x7>;
+ };
+ };
+
+ pwm0: pwm@f002c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
+ status = "okay";
+ };
+
+ usart0: serial@f001c000 {
+ status = "okay";
+ };
+
+ usart1: serial@f0020000 {
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+ status = "okay";
+ };
+
+ uart0: serial@f0024000 {
+ status = "okay";
+ };
+
+ mmc1: mmc@f8000000 {
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ spi1: spi@f8008000 {
+ cs-gpios = <&pioC 25 0>;
+ status = "okay";
+ };
+
+ adc0: adc@f8018000 {
+ pinctrl-0 = <
+ &pinctrl_adc0_adtrg
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ &pinctrl_adc0_ad5
+ &pinctrl_adc0_ad6
+ &pinctrl_adc0_ad7
+ &pinctrl_adc0_ad8
+ &pinctrl_adc0_ad9
+ >;
+ status = "okay";
+ };
+
+ i2c2: i2c@f801c000 {
+ dmas = <0>, <0>; /* Do not use DMA for i2c2 */
+ pinctrl-0 = <&pinctrl_i2c2_pu>;
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ dbgu: serial@ffffee00 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+ };
+
+ pinctrl@fffff200 {
+ board {
+ u-boot,dm-pre-reloc;
+ pinctrl_i2c0_pu: i2c0_pu {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_i2c2_pu: i2c2_pu {
+ atmel,pins =
+ <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_key_gpio: key_gpio_0 {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_mmc0_cd: mmc0_cd {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_mmc1_cd: mmc1_cd {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
+ };
+ };
+ };
+ };
+
+ nand0: nand@60000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+
+ usb0: gadget@00500000 {
+ atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+
+ usb1: ohci@00600000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioE 3 GPIO_ACTIVE_LOW
+ &pioE 4 GPIO_ACTIVE_LOW
+ >;
+ status = "okay";
+ };
+
+ usb2: ehci@00700000 {
+ status = "okay";
+ };
+ };
+
+ vcc_mmc0_reg: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+ regulator-name = "mmc0-card-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio>;
+
+ bp3 {
+ label = "PB_USER";
+ gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+ linux,code = <0x104>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ d2 {
+ label = "d2";
+ gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ d3 {
+ label = "d3";
+ gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
--- /dev/null
+/*
+ * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
+ *
+ * Copyright (C) 2015 Atmel,
+ * 2015 Josh Wu <josh.wu@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+ model = "Atmel SAMA5D4 Xplained";
+ compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ chosen {
+ u-boot,dm-pre-reloc;
+ stdout-path = &usart3;
+ };
+
+ memory {
+ reg = <0x20000000 0x20000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ spi0: spi@f8010000 {
+ u-boot,dm-pre-reloc;
+ cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+ status = "okay";
+ spi_flash@0 {
+ u-boot,dm-pre-reloc;
+ compatible = "spi-flash";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
+
+ i2c0: i2c@f8014000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f8020000 {
+ phy-mode = "rmii";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+
+ phy0: ethernet-phy@1 {
+ interrupt-parent = <&pioE>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ reg = <1>;
+ };
+ };
+
+ mmc1: mmc@fc000000 {
+ u-boot,dm-pre-reloc;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ vmmc-supply = <&vcc_mmc1_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 3 0>;
+ };
+ };
+
+ usart3: serial@fc00c000 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+ };
+
+ usart4: serial@fc010000 {
+ status = "okay";
+ };
+
+ spi1: spi@fc018000 {
+ cs-gpios = <&pioB 21 0>;
+ status = "okay";
+ };
+
+ adc0: adc@fc034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ /* external trigger conflicts with USBA_VBUS */
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ >;
+ atmel,adc-vref = <3300>;
+ status = "okay";
+ };
+
+ watchdog@fc068640 {
+ status = "okay";
+ };
+
+ pinctrl@fc06a000 {
+ board {
+ u-boot,dm-pre-reloc;
+ pinctrl_mmc1_cd: mmc1_cd {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+ };
+ pinctrl_key_gpio: key_gpio_0 {
+ atmel,pins =
+ <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+ atmel,pins =
+ <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ };
+ };
+ };
+
+ usb0: gadget@00400000 {
+ atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+
+ usb1: ohci@00500000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioE 11 GPIO_ACTIVE_HIGH
+ &pioE 14 GPIO_ACTIVE_HIGH
+ >;
+ status = "okay";
+ };
+
+ usb2: ehci@00600000 {
+ status = "okay";
+ };
+
+ nand0: nand@80000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ atmel,has-pmecc;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio>;
+
+ pb_user1 {
+ label = "pb_user1";
+ gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x100>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ d8 {
+ label = "d8";
+ gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ d10 {
+ label = "d10";
+ gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc_3v3_reg: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC 3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ reg = <0 1>;
+ };
+
+ vcc_mmc1_reg: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
+ regulator-name = "VDD MCI1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_reg>;
+ regulator-always-on;
+ reg = <1 1>;
+ };
+};
--- /dev/null
+/*
+ * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
+ *
+ * Copyright (C) 2014 Atmel,
+ * 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+ model = "Atmel SAMA5D4-EK";
+ compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ chosen {
+ u-boot,dm-pre-reloc;
+ stdout-path = &usart3;
+ };
+
+
+ memory {
+ reg = <0x20000000 0x20000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ adc0: adc@fc034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ /* external trigger conflicts with USBA_VBUS */
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ >;
+ /* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
+ atmel,adc-vref = <3300>;
+ /*atmel,adc-ts-wires = <4>;*/ /* Set up ADC touch screen */
+ status = "okay"; /* Enable ADC IIO support */
+ };
+
+ mmc0: mmc@f8000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 5 0>;
+ };
+ };
+
+ ssc0: ssc@f8008000 {
+ status = "okay";
+ };
+
+ spi0: spi@f8010000 {
+ u-boot,dm-pre-reloc;
+ cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+ status = "okay";
+ spi_flash@0 {
+ u-boot,dm-pre-reloc;
+ compatible = "spi-flash";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
+
+ i2c0: i2c@f8014000 {
+ status = "okay";
+
+ wm8904: codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ clocks = <&pck2>;
+ clock-names = "mclk";
+ };
+
+ qt1070:keyboard@1b {
+ compatible = "qt1070";
+ reg = <0x1b>;
+ interrupt-parent = <&pioE>;
+ interrupts = <25 0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qt1070_irq>;
+ wakeup-source;
+ };
+
+ atmel_mxt_ts@4c {
+ compatible = "atmel,atmel_mxt_ts";
+ reg = <0x4c>;
+ interrupt-parent = <&pioE>;
+ interrupts = <24 0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mxt_ts>;
+ };
+ };
+
+ macb0: ethernet@f8020000 {
+ pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+ phy-mode = "rmii";
+ status = "okay";
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ interrupt-parent = <&pioE>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+
+ mmc1: mmc@fc000000 {
+ u-boot,dm-pre-reloc;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 6 0>;
+ };
+ };
+
+ usart2: serial@fc008000 {
+ status = "okay";
+ };
+
+ usart3: serial@fc00c000 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+ };
+
+ usart4: serial@fc010000 {
+ status = "okay";
+ };
+
+ watchdog@fc068640 {
+ status = "okay";
+ };
+
+ pinctrl@fc06a000 {
+ board {
+ u-boot,dm-pre-reloc;
+ pinctrl_macb0_phy_irq: macb0_phy_irq {
+ atmel,pins =
+ <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins =
+ <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ pinctrl_mmc1_cd: mmc1_cd {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+ atmel,pins =
+ <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+ };
+ pinctrl_key_gpio: key_gpio_0 {
+ atmel,pins =
+ <AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
+ };
+ pinctrl_qt1070_irq: qt1070_irq {
+ atmel,pins =
+ <AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ pinctrl_mxt_ts: mxt_irq {
+ atmel,pins =
+ <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ };
+ };
+ };
+
+ usb0: gadget@00400000 {
+ atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+
+ usb1: ohci@00500000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
+ &pioE 11 GPIO_ACTIVE_LOW
+ &pioE 12 GPIO_ACTIVE_LOW
+ >;
+ status = "okay";
+ };
+
+ usb2: ehci@00600000 {
+ status = "okay";
+ };
+
+ nand0: nand@80000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ atmel,has-pmecc;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio>;
+
+ pb_user1 {
+ label = "pb_user1";
+ gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x100>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ d8 {
+ label = "d8";
+ /* PE28, conflicts with usart4 rts pin */
+ gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
+ };
+
+ d9 {
+ label = "d9";
+ gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ d10 {
+ label = "d10";
+ gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sound {
+ compatible = "atmel,asoc-wm8904";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+ atmel,model = "wm8904 @ SAMA5D4EK";
+ atmel,audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN1L", "Line In Jack",
+ "IN1R", "Line In Jack";
+
+ atmel,ssc-controller = <&ssc0>;
+ atmel,audio-codec = <&wm8904>;
+ };
+};
--- /dev/null
+/*
+ * Copyright 2017 Logic PD, Inc.
+ * Based on SabreSD, Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6qdl-logicpd.dtsi"
+
+/ {
+ model = "Logic PD i.MX6QDL SOM";
+ compatible = "fsl,imx6q";
+
+ reg_usb_otg_vbus: regulator-otg-vbus@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_h1_vbus: regulator-usbh1vbus@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_3v3: regulator-3v3@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "reg_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbh2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh2>;
+ phy_type = "hsic";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-speed = <10>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 /* nINT */
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 /* Ethernet Reset */
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x130b0
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x130b0
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x130b0
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0
+ >;
+ };
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* USB_H1_PWR_EN */
+ >;
+ };
+
+ pinctrl_usbh2: usbh2grp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x17030
+ MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x13030
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 /* USB_OTG_PWR_EN */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+};
--- /dev/null
+/*
+ * Copyright 2016 Logic PD
+ * This file is adapted from imx6qdl-sabresd.dtsi.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6q.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+};
+
+/* Reroute power feeding the CPU to come from the external PMIC */
+®_arm
+{
+ vin-supply = <&sw1a_reg>;
+};
+
+®_soc
+{
+ vin-supply = <&sw1c_reg>;
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vddcore";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vddsoc";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "gen_3v3";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-name = "sw3a_vddr";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-name = "sw3b_vddr";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "gen_rgmii";
+ };
+
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ regulator-name = "gen_5v0";
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "gen_vsns";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "gen_1v5";
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-name = "vgen2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-name = "gen_vadj_0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-name = "gen_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-name = "gen_adj_1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-name = "gen_2v5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ mfg_eeprom: at24@51 {
+ compatible = "atmel,24c64";
+ pagesize = <32>;
+ read-only;
+ reg = <0x51>;
+ };
+
+ user_eeprom: at24@52 {
+ compatible = "atmel,24c64";
+ pagesize = <32>;
+ reg = <0x52>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x1b0b0
+ MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x1b0b0
+ MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x1b0b0
+ MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x80000000
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x80000000
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x80000000
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x80000000
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x80000000
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x80000000
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000
+ MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x80000000
+ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x80000000
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x80000000
+ MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x80000000
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000
+ MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x80000000
+ MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x80000000
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x80000000
+ MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x80000000
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x80000000
+ MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x80000000
+ MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x80000000
+ MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x80000000
+ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x80000000
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
+ MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x80000000
+ MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x80000000
+ MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x80000000
+ MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000
+ MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x80000000
+ MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000
+ MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x80000000
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x80000000
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
+ MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000
+ MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x80000000
+ MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x80000000
+ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x80000000
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x80000000
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x80000000
+ MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x80000000
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x80000000
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000
+ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x80000000
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x80000000
+ MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x80000000
+ MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x80000000
+ MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x80000000
+ MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x80000000
+ MX6QDL_PAD_RGMII_RD0__GPIO6_IO25 0x80000000
+ MX6QDL_PAD_RGMII_RD1__GPIO6_IO27 0x80000000
+ MX6QDL_PAD_RGMII_RD2__GPIO6_IO28 0x80000000
+ MX6QDL_PAD_RGMII_RD3__GPIO6_IO29 0x80000000
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x80000000
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* WL_IRQ */
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1f0b0 /* WLAN_EN */
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1f0b0 /* BT_EN */
+ >;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ non-removable;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <&sw2_reg>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@0 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <1 GPIO_ACTIVE_HIGH>;
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sl.dtsi"
+
+/ {
+ model = "Freescale i.MX6 SoloLite EVK Board";
+ compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ user {
+ label = "debug";
+ gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 0 0>;
+ enable-active-high;
+ vin-supply = <&swbst_reg>;
+ };
+
+ reg_usb_otg2_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 2 0>;
+ enable-active-high;
+ vin-supply = <&swbst_reg>;
+ };
+
+ reg_aud3v: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "wm8962-supply-3v15";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-boot-on;
+ };
+
+ reg_aud4v: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "wm8962-supply-4v2";
+ regulator-min-microvolt = <4325000>;
+ regulator-max-microvolt = <4325000>;
+ regulator-boot-on;
+ };
+
+ reg_lcd_3v3: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "lcd-3v3";
+ gpio = <&gpio4 3 0>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC";
+ mux-int-port = <2>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux3>;
+ status = "okay";
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio4 11 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p32", "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_fec>;
+ pinctrl-1 = <&pinctrl_fec_sleep>;
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ codec: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
+ DCVDD-supply = <&vgen3_reg>;
+ DBVDD-supply = <®_aud3v>;
+ AVDD-supply = <&vgen3_reg>;
+ CPVDD-supply = <&vgen3_reg>;
+ MICVDD-supply = <®_aud3v>;
+ PLLVDD-supply = <&vgen3_reg>;
+ SPKVDD1-supply = <®_aud4v>;
+ SPKVDD2-supply = <®_aud4v>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6sl-evk {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
+ MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059
+ MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059
+ MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059
+ MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+ MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000
+ MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000
+ MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+ >;
+ };
+
+ pinctrl_audmux3: audmux3grp {
+ fsl,pins = <
+ MX6SL_PAD_AUD_RXD__AUD3_RXD 0x4130b0
+ MX6SL_PAD_AUD_TXC__AUD3_TXC 0x4130b0
+ MX6SL_PAD_AUD_TXD__AUD3_TXD 0x4110b0
+ MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
+ MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
+ MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
+ MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0
+ MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0
+ MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0
+ MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0
+ MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0
+ MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0
+ MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0
+ MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0
+ MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8
+ >;
+ };
+
+ pinctrl_fec_sleep: fecgrp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x3080
+ MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x3080
+ MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x3080
+ MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x3080
+ MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x3080
+ MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x3080
+ MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x3080
+ MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
+ MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001b8b1
+ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_kpp: kppgrp {
+ fsl,pins = <
+ MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010
+ MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x1b010
+ MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b0
+ MX6SL_PAD_KEY_COL0__KEY_COL0 0x110b0
+ MX6SL_PAD_KEY_COL1__KEY_COL1 0x110b0
+ MX6SL_PAD_KEY_COL2__KEY_COL2 0x110b0
+ >;
+ };
+
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
+ MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
+ MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
+ MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
+ MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
+ MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
+ MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
+ MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
+ MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
+ MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
+ MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
+ MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
+ MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
+ MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
+ MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
+ MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
+ MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
+ MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
+ MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
+ MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
+ MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
+ MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
+ MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
+ MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
+ MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
+ MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
+ MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
+ MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
+ >;
+ };
+
+ pinctrl_pwm1: pwmgrp {
+ fsl,pins = <
+ MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+ MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059
+ MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059
+ MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059
+ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
+ MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9
+ MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
+ MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
+ MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
+ MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
+ MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
+ MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
+ MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
+ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9
+ MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+ MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+ MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+ MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+ MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9
+ MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9
+ MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9
+ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x100b9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ >;
+ };
+ };
+};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp>;
+ linux,keymap = <
+ MATRIX_KEY(0x0, 0x0, KEY_UP) /* ROW0, COL0 */
+ MATRIX_KEY(0x0, 0x1, KEY_DOWN) /* ROW0, COL1 */
+ MATRIX_KEY(0x0, 0x2, KEY_ENTER) /* ROW0, COL2 */
+ MATRIX_KEY(0x1, 0x0, KEY_HOME) /* ROW1, COL0 */
+ MATRIX_KEY(0x1, 0x1, KEY_RIGHT) /* ROW1, COL1 */
+ MATRIX_KEY(0x1, 0x2, KEY_LEFT) /* ROW1, COL2 */
+ MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
+ MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP) /* ROW2, COL1 */
+ >;
+ status = "okay";
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ lcd-supply = <®_lcd_3v3>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33500000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <89>;
+ hfront-porch = <164>;
+ vback-porch = <23>;
+ vfront-porch = <10>;
+ hsync-len = <10>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&ssi2 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6SL_PINFUNC_H
+#define __DTS_IMX6SL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x04c 0x2a4 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_MCLK__PWM4_OUT 0x04c 0x2a4 0x000 0x1 0x0
+#define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY 0x04c 0x2a4 0x6b4 0x2 0x0
+#define MX6SL_PAD_AUD_MCLK__FEC_MDC 0x04c 0x2a4 0x000 0x3 0x0
+#define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x04c 0x2a4 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_MCLK__GPIO1_IO06 0x04c 0x2a4 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x04c 0x2a4 0x7f4 0x6 0x0
+#define MX6SL_PAD_AUD_RXC__AUD3_RXC 0x050 0x2a8 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_RXC__I2C1_SDA 0x050 0x2a8 0x720 0x1 0x0
+#define MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x050 0x2a8 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x050 0x2a8 0x80c 0x2 0x0
+#define MX6SL_PAD_AUD_RXC__FEC_TX_CLK 0x050 0x2a8 0x70c 0x3 0x0
+#define MX6SL_PAD_AUD_RXC__I2C3_SDA 0x050 0x2a8 0x730 0x4 0x0
+#define MX6SL_PAD_AUD_RXC__GPIO1_IO01 0x050 0x2a8 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_RXC__ECSPI3_SS1 0x050 0x2a8 0x6c4 0x6 0x0
+#define MX6SL_PAD_AUD_RXD__AUD3_RXD 0x054 0x2ac 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_RXD__ECSPI3_MOSI 0x054 0x2ac 0x6bc 0x1 0x0
+#define MX6SL_PAD_AUD_RXD__UART4_RX_DATA 0x054 0x2ac 0x814 0x2 0x0
+#define MX6SL_PAD_AUD_RXD__UART4_TX_DATA 0x054 0x2ac 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_RXD__FEC_RX_ER 0x054 0x2ac 0x708 0x3 0x0
+#define MX6SL_PAD_AUD_RXD__SD1_LCTL 0x054 0x2ac 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_RXD__GPIO1_IO02 0x054 0x2ac 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_RXFS__AUD3_RXFS 0x058 0x2b0 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_RXFS__I2C1_SCL 0x058 0x2b0 0x71c 0x1 0x0
+#define MX6SL_PAD_AUD_RXFS__UART3_RX_DATA 0x058 0x2b0 0x80c 0x2 0x1
+#define MX6SL_PAD_AUD_RXFS__UART3_TX_DATA 0x058 0x2b0 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_RXFS__FEC_MDIO 0x058 0x2b0 0x6f4 0x3 0x0
+#define MX6SL_PAD_AUD_RXFS__I2C3_SCL 0x058 0x2b0 0x72c 0x4 0x0
+#define MX6SL_PAD_AUD_RXFS__GPIO1_IO00 0x058 0x2b0 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_RXFS__ECSPI3_SS0 0x058 0x2b0 0x6c0 0x6 0x0
+#define MX6SL_PAD_AUD_TXC__AUD3_TXC 0x05c 0x2b4 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_TXC__ECSPI3_MISO 0x05c 0x2b4 0x6b8 0x1 0x0
+#define MX6SL_PAD_AUD_TXC__UART4_TX_DATA 0x05c 0x2b4 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_TXC__UART4_RX_DATA 0x05c 0x2b4 0x814 0x2 0x1
+#define MX6SL_PAD_AUD_TXC__FEC_RX_DV 0x05c 0x2b4 0x704 0x3 0x0
+#define MX6SL_PAD_AUD_TXC__SD2_LCTL 0x05c 0x2b4 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_TXC__GPIO1_IO03 0x05c 0x2b4 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_TXD__AUD3_TXD 0x060 0x2b8 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_TXD__ECSPI3_SCLK 0x060 0x2b8 0x6b0 0x1 0x0
+#define MX6SL_PAD_AUD_TXD__UART4_CTS_B 0x060 0x2b8 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_TXD__UART4_RTS_B 0x060 0x2b8 0x810 0x2 0x0
+#define MX6SL_PAD_AUD_TXD__FEC_TX_DATA0 0x060 0x2b8 0x000 0x3 0x0
+#define MX6SL_PAD_AUD_TXD__SD4_LCTL 0x060 0x2b8 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_TXD__GPIO1_IO05 0x060 0x2b8 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x064 0x2bc 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_TXFS__PWM3_OUT 0x064 0x2bc 0x000 0x1 0x0
+#define MX6SL_PAD_AUD_TXFS__UART4_RTS_B 0x064 0x2bc 0x810 0x2 0x1
+#define MX6SL_PAD_AUD_TXFS__UART4_CTS_B 0x064 0x2bc 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_TXFS__FEC_RX_DATA1 0x064 0x2bc 0x6fc 0x3 0x0
+#define MX6SL_PAD_AUD_TXFS__SD3_LCTL 0x064 0x2bc 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_TXFS__GPIO1_IO04 0x064 0x2bc 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x068 0x358 0x684 0x0 0x0
+#define MX6SL_PAD_ECSPI1_MISO__AUD4_TXFS 0x068 0x358 0x5f8 0x1 0x0
+#define MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B 0x068 0x358 0x818 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MISO__UART5_CTS_B 0x068 0x358 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MISO__EPDC_BDR0 0x068 0x358 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_MISO__SD2_WP 0x068 0x358 0x834 0x4 0x0
+#define MX6SL_PAD_ECSPI1_MISO__GPIO4_IO10 0x068 0x358 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x06c 0x35c 0x688 0x0 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__AUD4_TXC 0x06c 0x35c 0x5f4 0x1 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA 0x06c 0x35c 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__UART5_RX_DATA 0x06c 0x35c 0x81c 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__EPDC_VCOM1 0x06c 0x35c 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__SD2_VSELECT 0x06c 0x35c 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__GPIO4_IO09 0x06c 0x35c 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x070 0x360 0x67c 0x0 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__AUD4_TXD 0x070 0x360 0x5e8 0x1 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA 0x070 0x360 0x81c 0x2 0x1
+#define MX6SL_PAD_ECSPI1_SCLK__UART5_TX_DATA 0x070 0x360 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__EPDC_VCOM0 0x070 0x360 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__SD2_RESET 0x070 0x360 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x070 0x360 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x070 0x360 0x820 0x6 0x0
+#define MX6SL_PAD_ECSPI1_SS0__ECSPI1_SS0 0x074 0x364 0x68c 0x0 0x0
+#define MX6SL_PAD_ECSPI1_SS0__AUD4_RXD 0x074 0x364 0x5e4 0x1 0x0
+#define MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B 0x074 0x364 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_SS0__UART5_RTS_B 0x074 0x364 0x818 0x2 0x1
+#define MX6SL_PAD_ECSPI1_SS0__EPDC_BDR1 0x074 0x364 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_SS0__SD2_CD_B 0x074 0x364 0x830 0x4 0x0
+#define MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x074 0x364 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_SS0__USB_OTG2_PWR 0x074 0x364 0x000 0x6 0x0
+#define MX6SL_PAD_ECSPI2_MISO__ECSPI2_MISO 0x078 0x368 0x6a0 0x0 0x0
+#define MX6SL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0 0x078 0x368 0x000 0x1 0x0
+#define MX6SL_PAD_ECSPI2_MISO__UART3_RTS_B 0x078 0x368 0x808 0x2 0x0
+#define MX6SL_PAD_ECSPI2_MISO__UART3_CTS_B 0x078 0x368 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_MISO__CSI_MCLK 0x078 0x368 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI2_MISO__SD1_WP 0x078 0x368 0x82c 0x4 0x0
+#define MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14 0x078 0x368 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_MISO__USB_OTG1_OC 0x078 0x368 0x824 0x6 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x07c 0x36c 0x6a4 0x0 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1 0x07c 0x36c 0x000 0x1 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__UART3_TX_DATA 0x07c 0x36c 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__UART3_RX_DATA 0x07c 0x36c 0x80c 0x2 0x2
+#define MX6SL_PAD_ECSPI2_MOSI__CSI_HSYNC 0x07c 0x36c 0x670 0x3 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__SD1_VSELECT 0x07c 0x36c 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x07c 0x36c 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x080 0x370 0x69c 0x0 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK 0x080 0x370 0x7f4 0x1 0x1
+#define MX6SL_PAD_ECSPI2_SCLK__UART3_RX_DATA 0x080 0x370 0x80c 0x2 0x3
+#define MX6SL_PAD_ECSPI2_SCLK__UART3_TX_DATA 0x080 0x370 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__CSI_PIXCLK 0x080 0x370 0x674 0x3 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__SD1_RESET 0x080 0x370 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__GPIO4_IO12 0x080 0x370 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x080 0x370 0x820 0x6 0x1
+#define MX6SL_PAD_ECSPI2_SS0__ECSPI2_SS0 0x084 0x374 0x6a8 0x0 0x0
+#define MX6SL_PAD_ECSPI2_SS0__ECSPI1_SS3 0x084 0x374 0x698 0x1 0x0
+#define MX6SL_PAD_ECSPI2_SS0__UART3_CTS_B 0x084 0x374 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_SS0__UART3_RTS_B 0x084 0x374 0x808 0x2 0x1
+#define MX6SL_PAD_ECSPI2_SS0__CSI_VSYNC 0x084 0x374 0x678 0x3 0x0
+#define MX6SL_PAD_ECSPI2_SS0__SD1_CD_B 0x084 0x374 0x828 0x4 0x0
+#define MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15 0x084 0x374 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_SS0__USB_OTG1_PWR 0x084 0x374 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_BDR0__EPDC_BDR0 0x088 0x378 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_BDR0__SD4_CLK 0x088 0x378 0x850 0x1 0x0
+#define MX6SL_PAD_EPDC_BDR0__UART3_RTS_B 0x088 0x378 0x808 0x2 0x2
+#define MX6SL_PAD_EPDC_BDR0__UART3_CTS_B 0x088 0x378 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_BDR0__EIM_ADDR26 0x088 0x378 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_BDR0__SPDC_RL 0x088 0x378 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_BDR0__GPIO2_IO05 0x088 0x378 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_BDR0__EPDC_SDCE7 0x088 0x378 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_BDR1__EPDC_BDR1 0x08c 0x37c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_BDR1__SD4_CMD 0x08c 0x37c 0x858 0x1 0x0
+#define MX6SL_PAD_EPDC_BDR1__UART3_CTS_B 0x08c 0x37c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_BDR1__UART3_RTS_B 0x08c 0x37c 0x808 0x2 0x3
+#define MX6SL_PAD_EPDC_BDR1__EIM_CRE 0x08c 0x37c 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_BDR1__SPDC_UD 0x08c 0x37c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_BDR1__GPIO2_IO06 0x08c 0x37c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_BDR1__EPDC_SDCE8 0x08c 0x37c 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_D0__EPDC_DATA00 0x090 0x380 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D0__ECSPI4_MOSI 0x090 0x380 0x6d8 0x1 0x0
+#define MX6SL_PAD_EPDC_D0__LCD_DATA24 0x090 0x380 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D0__CSI_DATA00 0x090 0x380 0x630 0x3 0x0
+#define MX6SL_PAD_EPDC_D0__SPDC_DATA00 0x090 0x380 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D0__GPIO1_IO07 0x090 0x380 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D1__EPDC_DATA01 0x094 0x384 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D1__ECSPI4_MISO 0x094 0x384 0x6d4 0x1 0x0
+#define MX6SL_PAD_EPDC_D1__LCD_DATA25 0x094 0x384 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D1__CSI_DATA01 0x094 0x384 0x634 0x3 0x0
+#define MX6SL_PAD_EPDC_D1__SPDC_DATA01 0x094 0x384 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D1__GPIO1_IO08 0x094 0x384 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D10__EPDC_DATA10 0x098 0x388 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D10__ECSPI3_SS0 0x098 0x388 0x6c0 0x1 0x1
+#define MX6SL_PAD_EPDC_D10__EPDC_PWR_CTRL2 0x098 0x388 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D10__EIM_ADDR18 0x098 0x388 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D10__SPDC_DATA10 0x098 0x388 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D10__GPIO1_IO17 0x098 0x388 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D10__SD4_WP 0x098 0x388 0x87c 0x6 0x0
+#define MX6SL_PAD_EPDC_D11__EPDC_DATA11 0x09c 0x38c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D11__ECSPI3_SCLK 0x09c 0x38c 0x6b0 0x1 0x1
+#define MX6SL_PAD_EPDC_D11__EPDC_PWR_CTRL3 0x09c 0x38c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D11__EIM_ADDR19 0x09c 0x38c 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D11__SPDC_DATA11 0x09c 0x38c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D11__GPIO1_IO18 0x09c 0x38c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D11__SD4_CD_B 0x09c 0x38c 0x854 0x6 0x0
+#define MX6SL_PAD_EPDC_D12__EPDC_DATA12 0x0a0 0x390 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x0a0 0x390 0x804 0x1 0x0
+#define MX6SL_PAD_EPDC_D12__UART2_TX_DATA 0x0a0 0x390 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D12__EPDC_PWR_COM 0x0a0 0x390 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D12__EIM_ADDR20 0x0a0 0x390 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D12__SPDC_DATA12 0x0a0 0x390 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D12__GPIO1_IO19 0x0a0 0x390 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D12__ECSPI3_SS1 0x0a0 0x390 0x6c4 0x6 0x1
+#define MX6SL_PAD_EPDC_D13__EPDC_DATA13 0x0a4 0x394 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x0a4 0x394 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D13__UART2_RX_DATA 0x0a4 0x394 0x804 0x1 0x1
+#define MX6SL_PAD_EPDC_D13__EPDC_PWR_IRQ 0x0a4 0x394 0x6e8 0x2 0x0
+#define MX6SL_PAD_EPDC_D13__EIM_ADDR21 0x0a4 0x394 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D13__SPDC_DATA13 0x0a4 0x394 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D13__GPIO1_IO20 0x0a4 0x394 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D13__ECSPI3_SS2 0x0a4 0x394 0x6c8 0x6 0x0
+#define MX6SL_PAD_EPDC_D14__EPDC_DATA14 0x0a8 0x398 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x0a8 0x398 0x800 0x1 0x0
+#define MX6SL_PAD_EPDC_D14__UART2_CTS_B 0x0a8 0x398 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D14__EPDC_PWR_STAT 0x0a8 0x398 0x6ec 0x2 0x0
+#define MX6SL_PAD_EPDC_D14__EIM_ADDR22 0x0a8 0x398 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D14__SPDC_DATA14 0x0a8 0x398 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D14__GPIO1_IO21 0x0a8 0x398 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D14__ECSPI3_SS3 0x0a8 0x398 0x6cc 0x6 0x0
+#define MX6SL_PAD_EPDC_D15__EPDC_DATA15 0x0ac 0x39c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x0ac 0x39c 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D15__UART2_RTS_B 0x0ac 0x39c 0x800 0x1 0x1
+#define MX6SL_PAD_EPDC_D15__EPDC_PWR_WAKE 0x0ac 0x39c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D15__EIM_ADDR23 0x0ac 0x39c 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D15__SPDC_DATA15 0x0ac 0x39c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D15__GPIO1_IO22 0x0ac 0x39c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D15__ECSPI3_RDY 0x0ac 0x39c 0x6b4 0x6 0x1
+#define MX6SL_PAD_EPDC_D2__EPDC_DATA02 0x0b0 0x3a0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D2__ECSPI4_SS0 0x0b0 0x3a0 0x6dc 0x1 0x0
+#define MX6SL_PAD_EPDC_D2__LCD_DATA26 0x0b0 0x3a0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D2__CSI_DATA02 0x0b0 0x3a0 0x638 0x3 0x0
+#define MX6SL_PAD_EPDC_D2__SPDC_DATA02 0x0b0 0x3a0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D2__GPIO1_IO09 0x0b0 0x3a0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D3__EPDC_DATA03 0x0b4 0x3a4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D3__ECSPI4_SCLK 0x0b4 0x3a4 0x6d0 0x1 0x0
+#define MX6SL_PAD_EPDC_D3__LCD_DATA27 0x0b4 0x3a4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D3__CSI_DATA03 0x0b4 0x3a4 0x63c 0x3 0x0
+#define MX6SL_PAD_EPDC_D3__SPDC_DATA03 0x0b4 0x3a4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D3__GPIO1_IO10 0x0b4 0x3a4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D4__EPDC_DATA04 0x0b8 0x3a8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D4__ECSPI4_SS1 0x0b8 0x3a8 0x6e0 0x1 0x0
+#define MX6SL_PAD_EPDC_D4__LCD_DATA28 0x0b8 0x3a8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D4__CSI_DATA04 0x0b8 0x3a8 0x640 0x3 0x0
+#define MX6SL_PAD_EPDC_D4__SPDC_DATA04 0x0b8 0x3a8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D4__GPIO1_IO11 0x0b8 0x3a8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D5__EPDC_DATA05 0x0bc 0x3ac 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D5__ECSPI4_SS2 0x0bc 0x3ac 0x6e4 0x1 0x0
+#define MX6SL_PAD_EPDC_D5__LCD_DATA29 0x0bc 0x3ac 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D5__CSI_DATA05 0x0bc 0x3ac 0x644 0x3 0x0
+#define MX6SL_PAD_EPDC_D5__SPDC_DATA05 0x0bc 0x3ac 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D5__GPIO1_IO12 0x0bc 0x3ac 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D6__EPDC_DATA06 0x0c0 0x3b0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D6__ECSPI4_SS3 0x0c0 0x3b0 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D6__LCD_DATA30 0x0c0 0x3b0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D6__CSI_DATA06 0x0c0 0x3b0 0x648 0x3 0x0
+#define MX6SL_PAD_EPDC_D6__SPDC_DATA06 0x0c0 0x3b0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D6__GPIO1_IO13 0x0c0 0x3b0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D7__EPDC_DATA07 0x0c4 0x3b4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D7__ECSPI4_RDY 0x0c4 0x3b4 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D7__LCD_DATA31 0x0c4 0x3b4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D7__CSI_DATA07 0x0c4 0x3b4 0x64c 0x3 0x0
+#define MX6SL_PAD_EPDC_D7__SPDC_DATA07 0x0c4 0x3b4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D7__GPIO1_IO14 0x0c4 0x3b4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D8__EPDC_DATA08 0x0c8 0x3b8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D8__ECSPI3_MOSI 0x0c8 0x3b8 0x6bc 0x1 0x1
+#define MX6SL_PAD_EPDC_D8__EPDC_PWR_CTRL0 0x0c8 0x3b8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D8__EIM_ADDR16 0x0c8 0x3b8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D8__SPDC_DATA08 0x0c8 0x3b8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D8__GPIO1_IO15 0x0c8 0x3b8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D8__SD4_RESET 0x0c8 0x3b8 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_D9__EPDC_DATA09 0x0cc 0x3bc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D9__ECSPI3_MISO 0x0cc 0x3bc 0x6b8 0x1 0x1
+#define MX6SL_PAD_EPDC_D9__EPDC_PWR_CTRL1 0x0cc 0x3bc 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D9__EIM_ADDR17 0x0cc 0x3bc 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D9__SPDC_DATA09 0x0cc 0x3bc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D9__GPIO1_IO16 0x0cc 0x3bc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D9__SD4_VSELECT 0x0cc 0x3bc 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x0d0 0x3c0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDCLK__ECSPI2_SS2 0x0d0 0x3c0 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKR 0x0d0 0x3c0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x0d0 0x3c0 0x674 0x3 0x1
+#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKL 0x0d0 0x3c0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDCLK__GPIO1_IO31 0x0d0 0x3c0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDCLK__SD2_RESET 0x0d0 0x3c0 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_GDOE__EPDC_GDOE 0x0d4 0x3c4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDOE__ECSPI2_SS3 0x0d4 0x3c4 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDOE__SPDC_YOER 0x0d4 0x3c4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDOE__CSI_HSYNC 0x0d4 0x3c4 0x670 0x3 0x1
+#define MX6SL_PAD_EPDC_GDOE__SPDC_YOEL 0x0d4 0x3c4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDOE__GPIO2_IO00 0x0d4 0x3c4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDOE__SD2_VSELECT 0x0d4 0x3c4 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_GDRL__EPDC_GDRL 0x0d8 0x3c8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDRL__ECSPI2_RDY 0x0d8 0x3c8 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUR 0x0d8 0x3c8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDRL__CSI_MCLK 0x0d8 0x3c8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUL 0x0d8 0x3c8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDRL__GPIO2_IO01 0x0d8 0x3c8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDRL__SD2_WP 0x0d8 0x3c8 0x834 0x6 0x1
+#define MX6SL_PAD_EPDC_GDSP__EPDC_GDSP 0x0dc 0x3cc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDSP__PWM4_OUT 0x0dc 0x3cc 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODR 0x0dc 0x3cc 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDSP__CSI_VSYNC 0x0dc 0x3cc 0x678 0x3 0x1
+#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODL 0x0dc 0x3cc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDSP__GPIO2_IO02 0x0dc 0x3cc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDSP__SD2_CD_B 0x0dc 0x3cc 0x830 0x6 0x1
+#define MX6SL_PAD_EPDC_PWRCOM__EPDC_PWR_COM 0x0e0 0x3d0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__SD4_DATA0 0x0e0 0x3d0 0x85c 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__LCD_DATA20 0x0e0 0x3d0 0x7c8 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__EIM_BCLK 0x0e0 0x3d0 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x0e0 0x3d0 0x5dc 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__GPIO2_IO11 0x0e0 0x3d0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__SD3_RESET 0x0e0 0x3d0 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__EPDC_PWR_CTRL0 0x0e4 0x3d4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__AUD5_RXC 0x0e4 0x3d4 0x604 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__LCD_DATA16 0x0e4 0x3d4 0x7b8 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__EIM_RW 0x0e4 0x3d4 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__SPDC_YCKL 0x0e4 0x3d4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07 0x0e4 0x3d4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__SD4_RESET 0x0e4 0x3d4 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__EPDC_PWR_CTRL1 0x0e8 0x3d8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__AUD5_TXFS 0x0e8 0x3d8 0x610 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__LCD_DATA17 0x0e8 0x3d8 0x7bc 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__EIM_OE_B 0x0e8 0x3d8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__SPDC_YOEL 0x0e8 0x3d8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08 0x0e8 0x3d8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__SD4_VSELECT 0x0e8 0x3d8 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__EPDC_PWR_CTRL2 0x0ec 0x3dc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__AUD5_TXD 0x0ec 0x3dc 0x600 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__LCD_DATA18 0x0ec 0x3dc 0x7c0 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__EIM_CS0_B 0x0ec 0x3dc 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__SPDC_YDIOUL 0x0ec 0x3dc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09 0x0ec 0x3dc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__SD4_WP 0x0ec 0x3dc 0x87c 0x6 0x1
+#define MX6SL_PAD_EPDC_PWRCTRL3__EPDC_PWR_CTRL3 0x0f0 0x3e0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__AUD5_TXC 0x0f0 0x3e0 0x60c 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__LCD_DATA19 0x0f0 0x3e0 0x7c4 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__EIM_CS1_B 0x0f0 0x3e0 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__SPDC_YDIODL 0x0f0 0x3e0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x0f0 0x3e0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__SD4_CD_B 0x0f0 0x3e0 0x854 0x6 0x1
+#define MX6SL_PAD_EPDC_PWRINT__EPDC_PWR_IRQ 0x0f4 0x3e4 0x6e8 0x0 0x1
+#define MX6SL_PAD_EPDC_PWRINT__SD4_DATA1 0x0f4 0x3e4 0x860 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRINT__LCD_DATA21 0x0f4 0x3e4 0x7cc 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRINT__EIM_ACLK_FREERUN 0x0f4 0x3e4 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRINT__USB_OTG2_ID 0x0f4 0x3e4 0x5e0 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12 0x0f4 0x3e4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRINT__SD3_VSELECT 0x0f4 0x3e4 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__EPDC_PWR_STAT 0x0f8 0x3e8 0x6ec 0x0 0x1
+#define MX6SL_PAD_EPDC_PWRSTAT__SD4_DATA2 0x0f8 0x3e8 0x864 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__LCD_DATA22 0x0f8 0x3e8 0x7d0 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__EIM_WAIT_B 0x0f8 0x3e8 0x884 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__ARM_EVENTI 0x0f8 0x3e8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x0f8 0x3e8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__SD3_WP 0x0f8 0x3e8 0x84c 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__EPDC_PWR_WAKE 0x0fc 0x3ec 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__SD4_DATA3 0x0fc 0x3ec 0x868 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__LCD_DATA23 0x0fc 0x3ec 0x7d4 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__EIM_DTACK_B 0x0fc 0x3ec 0x880 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__ARM_EVENTO 0x0fc 0x3ec 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x0fc 0x3ec 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__SD3_CD_B 0x0fc 0x3ec 0x838 0x6 0x0
+#define MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x100 0x3f0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE0__ECSPI2_SS1 0x100 0x3f0 0x6ac 0x1 0x0
+#define MX6SL_PAD_EPDC_SDCE0__PWM3_OUT 0x100 0x3f0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE0__EIM_CS2_B 0x100 0x3f0 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE0__SPDC_YCKR 0x100 0x3f0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE0__GPIO1_IO27 0x100 0x3f0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x104 0x3f4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE1__WDOG2_B 0x104 0x3f4 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_SDCE1__PWM4_OUT 0x104 0x3f4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE1__EIM_LBA_B 0x104 0x3f4 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE1__SPDC_YOER 0x104 0x3f4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE1__GPIO1_IO28 0x104 0x3f4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x108 0x3f8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE2__I2C3_SCL 0x108 0x3f8 0x72c 0x1 0x1
+#define MX6SL_PAD_EPDC_SDCE2__PWM1_OUT 0x108 0x3f8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE2__EIM_EB0_B 0x108 0x3f8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE2__SPDC_YDIOUR 0x108 0x3f8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29 0x108 0x3f8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCE3__EPDC_SDCE3 0x10c 0x3fc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE3__I2C3_SDA 0x10c 0x3fc 0x730 0x1 0x1
+#define MX6SL_PAD_EPDC_SDCE3__PWM2_OUT 0x10c 0x3fc 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE3__EIM_EB1_B 0x10c 0x3fc 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE3__SPDC_YDIODR 0x10c 0x3fc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE3__GPIO1_IO30 0x10c 0x3fc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x110 0x400 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCLK__ECSPI2_MOSI 0x110 0x400 0x6a4 0x1 0x1
+#define MX6SL_PAD_EPDC_SDCLK__I2C2_SCL 0x110 0x400 0x724 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCLK__CSI_DATA08 0x110 0x400 0x650 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCLK__SPDC_CL 0x110 0x400 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCLK__GPIO1_IO23 0x110 0x400 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDLE__EPDC_SDLE 0x114 0x404 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDLE__ECSPI2_MISO 0x114 0x404 0x6a0 0x1 0x1
+#define MX6SL_PAD_EPDC_SDLE__I2C2_SDA 0x114 0x404 0x728 0x2 0x0
+#define MX6SL_PAD_EPDC_SDLE__CSI_DATA09 0x114 0x404 0x654 0x3 0x0
+#define MX6SL_PAD_EPDC_SDLE__SPDC_LD 0x114 0x404 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDLE__GPIO1_IO24 0x114 0x404 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDOE__EPDC_SDOE 0x118 0x408 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDOE__ECSPI2_SS0 0x118 0x408 0x6a8 0x1 0x1
+#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOR 0x118 0x408 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDOE__CSI_DATA10 0x118 0x408 0x658 0x3 0x0
+#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOL 0x118 0x408 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDOE__GPIO1_IO25 0x118 0x408 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x11c 0x40c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDSHR__ECSPI2_SCLK 0x11c 0x40c 0x69c 0x1 0x1
+#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDCE4 0x11c 0x40c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDSHR__CSI_DATA11 0x11c 0x40c 0x65c 0x3 0x0
+#define MX6SL_PAD_EPDC_SDSHR__SPDC_XDIOR 0x11c 0x40c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDSHR__GPIO1_IO26 0x11c 0x40c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_VCOM0__EPDC_VCOM0 0x120 0x410 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_VCOM0__AUD5_RXFS 0x120 0x410 0x608 0x1 0x0
+#define MX6SL_PAD_EPDC_VCOM0__UART3_RX_DATA 0x120 0x410 0x80c 0x2 0x4
+#define MX6SL_PAD_EPDC_VCOM0__UART3_TX_DATA 0x120 0x410 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_VCOM0__EIM_ADDR24 0x120 0x410 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_VCOM0__SPDC_VCOM0 0x120 0x410 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x120 0x410 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_VCOM0__EPDC_SDCE5 0x120 0x410 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_VCOM1__EPDC_VCOM1 0x124 0x414 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_VCOM1__AUD5_RXD 0x124 0x414 0x5fc 0x1 0x0
+#define MX6SL_PAD_EPDC_VCOM1__UART3_TX_DATA 0x124 0x414 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_VCOM1__UART3_RX_DATA 0x124 0x414 0x80c 0x2 0x5
+#define MX6SL_PAD_EPDC_VCOM1__EIM_ADDR25 0x124 0x414 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_VCOM1__SPDC_VCOM1 0x124 0x414 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_VCOM1__GPIO2_IO04 0x124 0x414 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_VCOM1__EPDC_SDCE6 0x124 0x414 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x128 0x418 0x704 0x0 0x1
+#define MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x128 0x418 0x860 0x1 0x1
+#define MX6SL_PAD_FEC_CRS_DV__AUD6_TXC 0x128 0x418 0x624 0x2 0x0
+#define MX6SL_PAD_FEC_CRS_DV__ECSPI4_MISO 0x128 0x418 0x6d4 0x3 0x1
+#define MX6SL_PAD_FEC_CRS_DV__GPT_COMPARE2 0x128 0x418 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x128 0x418 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_CRS_DV__ARM_TRACE31 0x128 0x418 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_MDC__FEC_MDC 0x12c 0x41c 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_MDC__SD4_DATA4 0x12c 0x41c 0x86c 0x1 0x0
+#define MX6SL_PAD_FEC_MDC__AUDIO_CLK_OUT 0x12c 0x41c 0x000 0x2 0x0
+#define MX6SL_PAD_FEC_MDC__SD1_RESET 0x12c 0x41c 0x000 0x3 0x0
+#define MX6SL_PAD_FEC_MDC__SD3_RESET 0x12c 0x41c 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x12c 0x41c 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_MDC__ARM_TRACE29 0x12c 0x41c 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x130 0x420 0x6f4 0x0 0x1
+#define MX6SL_PAD_FEC_MDIO__SD4_CLK 0x130 0x420 0x850 0x1 0x1
+#define MX6SL_PAD_FEC_MDIO__AUD6_RXFS 0x130 0x420 0x620 0x2 0x0
+#define MX6SL_PAD_FEC_MDIO__ECSPI4_SS0 0x130 0x420 0x6dc 0x3 0x1
+#define MX6SL_PAD_FEC_MDIO__GPT_CAPTURE1 0x130 0x420 0x710 0x4 0x0
+#define MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x130 0x420 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_MDIO__ARM_TRACE26 0x130 0x420 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x134 0x424 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_REF_CLK__SD4_RESET 0x134 0x424 0x000 0x1 0x0
+#define MX6SL_PAD_FEC_REF_CLK__WDOG1_B 0x134 0x424 0x000 0x2 0x0
+#define MX6SL_PAD_FEC_REF_CLK__PWM4_OUT 0x134 0x424 0x000 0x3 0x0
+#define MX6SL_PAD_FEC_REF_CLK__CCM_PMIC_READY 0x134 0x424 0x62c 0x4 0x0
+#define MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x134 0x424 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_REF_CLK__SPDIF_EXT_CLK 0x134 0x424 0x7f4 0x6 0x2
+#define MX6SL_PAD_FEC_RX_ER__FEC_RX_ER 0x138 0x428 0x708 0x0 0x1
+#define MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x138 0x428 0x85c 0x1 0x1
+#define MX6SL_PAD_FEC_RX_ER__AUD6_RXD 0x138 0x428 0x614 0x2 0x0
+#define MX6SL_PAD_FEC_RX_ER__ECSPI4_MOSI 0x138 0x428 0x6d8 0x3 0x1
+#define MX6SL_PAD_FEC_RX_ER__GPT_COMPARE1 0x138 0x428 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x138 0x428 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_RX_ER__ARM_TRACE25 0x138 0x428 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x13c 0x42c 0x6f8 0x0 0x0
+#define MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x13c 0x42c 0x870 0x1 0x0
+#define MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x13c 0x42c 0x5dc 0x2 0x1
+#define MX6SL_PAD_FEC_RXD0__SD1_VSELECT 0x13c 0x42c 0x000 0x3 0x0
+#define MX6SL_PAD_FEC_RXD0__SD3_VSELECT 0x13c 0x42c 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x13c 0x42c 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_RXD0__ARM_TRACE24 0x13c 0x42c 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x140 0x430 0x6fc 0x0 0x1
+#define MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x140 0x430 0x864 0x1 0x1
+#define MX6SL_PAD_FEC_RXD1__AUD6_TXFS 0x140 0x430 0x628 0x2 0x0
+#define MX6SL_PAD_FEC_RXD1__ECSPI4_SS1 0x140 0x430 0x6e0 0x3 0x1
+#define MX6SL_PAD_FEC_RXD1__GPT_COMPARE3 0x140 0x430 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x140 0x430 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_RXD1__FEC_COL 0x140 0x430 0x6f0 0x6 0x0
+#define MX6SL_PAD_FEC_TX_CLK__FEC_TX_CLK 0x144 0x434 0x70c 0x0 0x1
+#define MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x144 0x434 0x858 0x1 0x1
+#define MX6SL_PAD_FEC_TX_CLK__AUD6_RXC 0x144 0x434 0x61c 0x2 0x0
+#define MX6SL_PAD_FEC_TX_CLK__ECSPI4_SCLK 0x144 0x434 0x6d0 0x3 0x1
+#define MX6SL_PAD_FEC_TX_CLK__GPT_CAPTURE2 0x144 0x434 0x714 0x4 0x0
+#define MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x144 0x434 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TX_CLK__ARM_TRACE27 0x144 0x434 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x148 0x438 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x148 0x438 0x874 0x1 0x0
+#define MX6SL_PAD_FEC_TX_EN__SPDIF_IN 0x148 0x438 0x7f0 0x2 0x0
+#define MX6SL_PAD_FEC_TX_EN__SD1_WP 0x148 0x438 0x82c 0x3 0x1
+#define MX6SL_PAD_FEC_TX_EN__SD3_WP 0x148 0x438 0x84c 0x4 0x1
+#define MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x148 0x438 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TX_EN__ARM_TRACE28 0x148 0x438 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x14c 0x43c 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x14c 0x43c 0x868 0x1 0x1
+#define MX6SL_PAD_FEC_TXD0__AUD6_TXD 0x14c 0x43c 0x618 0x2 0x0
+#define MX6SL_PAD_FEC_TXD0__ECSPI4_SS2 0x14c 0x43c 0x6e4 0x3 0x1
+#define MX6SL_PAD_FEC_TXD0__GPT_CLKIN 0x14c 0x43c 0x718 0x4 0x0
+#define MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x14c 0x43c 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TXD0__ARM_TRACE30 0x14c 0x43c 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x150 0x440 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x150 0x440 0x878 0x1 0x0
+#define MX6SL_PAD_FEC_TXD1__SPDIF_OUT 0x150 0x440 0x000 0x2 0x0
+#define MX6SL_PAD_FEC_TXD1__SD1_CD_B 0x150 0x440 0x828 0x3 0x1
+#define MX6SL_PAD_FEC_TXD1__SD3_CD_B 0x150 0x440 0x838 0x4 0x1
+#define MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x150 0x440 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TXD1__FEC_RX_CLK 0x150 0x440 0x700 0x6 0x0
+#define MX6SL_PAD_HSIC_DAT__USB_H_DATA 0x154 0x444 0x000 0x0 0x0
+#define MX6SL_PAD_HSIC_DAT__I2C1_SCL 0x154 0x444 0x71c 0x1 0x1
+#define MX6SL_PAD_HSIC_DAT__PWM1_OUT 0x154 0x444 0x000 0x2 0x0
+#define MX6SL_PAD_HSIC_DAT__XTALOSC_REF_CLK_24M 0x154 0x444 0x000 0x3 0x0
+#define MX6SL_PAD_HSIC_DAT__GPIO3_IO19 0x154 0x444 0x000 0x5 0x0
+#define MX6SL_PAD_HSIC_STROBE__USB_H_STROBE 0x158 0x448 0x000 0x0 0x0
+#define MX6SL_PAD_HSIC_STROBE__I2C1_SDA 0x158 0x448 0x720 0x1 0x1
+#define MX6SL_PAD_HSIC_STROBE__PWM2_OUT 0x158 0x448 0x000 0x2 0x0
+#define MX6SL_PAD_HSIC_STROBE__XTALOSC_REF_CLK_32K 0x158 0x448 0x000 0x3 0x0
+#define MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x158 0x448 0x000 0x5 0x0
+#define MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x15c 0x44c 0x71c 0x0 0x2
+#define MX6SL_PAD_I2C1_SCL__UART1_RTS_B 0x15c 0x44c 0x7f8 0x1 0x0
+#define MX6SL_PAD_I2C1_SCL__UART1_CTS_B 0x15c 0x44c 0x000 0x1 0x0
+#define MX6SL_PAD_I2C1_SCL__ECSPI3_SS2 0x15c 0x44c 0x6c8 0x2 0x1
+#define MX6SL_PAD_I2C1_SCL__FEC_RX_DATA0 0x15c 0x44c 0x6f8 0x3 0x1
+#define MX6SL_PAD_I2C1_SCL__SD3_RESET 0x15c 0x44c 0x000 0x4 0x0
+#define MX6SL_PAD_I2C1_SCL__GPIO3_IO12 0x15c 0x44c 0x000 0x5 0x0
+#define MX6SL_PAD_I2C1_SCL__ECSPI1_SS1 0x15c 0x44c 0x690 0x6 0x0
+#define MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x160 0x450 0x720 0x0 0x2
+#define MX6SL_PAD_I2C1_SDA__UART1_CTS_B 0x160 0x450 0x000 0x1 0x0
+#define MX6SL_PAD_I2C1_SDA__UART1_RTS_B 0x160 0x450 0x7f8 0x1 0x1
+#define MX6SL_PAD_I2C1_SDA__ECSPI3_SS3 0x160 0x450 0x6cc 0x2 0x1
+#define MX6SL_PAD_I2C1_SDA__FEC_TX_EN 0x160 0x450 0x000 0x3 0x0
+#define MX6SL_PAD_I2C1_SDA__SD3_VSELECT 0x160 0x450 0x000 0x4 0x0
+#define MX6SL_PAD_I2C1_SDA__GPIO3_IO13 0x160 0x450 0x000 0x5 0x0
+#define MX6SL_PAD_I2C1_SDA__ECSPI1_SS2 0x160 0x450 0x694 0x6 0x0
+#define MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x164 0x454 0x724 0x0 0x1
+#define MX6SL_PAD_I2C2_SCL__AUD4_RXFS 0x164 0x454 0x5f0 0x1 0x0
+#define MX6SL_PAD_I2C2_SCL__SPDIF_IN 0x164 0x454 0x7f0 0x2 0x1
+#define MX6SL_PAD_I2C2_SCL__FEC_TX_DATA1 0x164 0x454 0x000 0x3 0x0
+#define MX6SL_PAD_I2C2_SCL__SD3_WP 0x164 0x454 0x84c 0x4 0x2
+#define MX6SL_PAD_I2C2_SCL__GPIO3_IO14 0x164 0x454 0x000 0x5 0x0
+#define MX6SL_PAD_I2C2_SCL__ECSPI1_RDY 0x164 0x454 0x680 0x6 0x0
+#define MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x168 0x458 0x728 0x0 0x1
+#define MX6SL_PAD_I2C2_SDA__AUD4_RXC 0x168 0x458 0x5ec 0x1 0x0
+#define MX6SL_PAD_I2C2_SDA__SPDIF_OUT 0x168 0x458 0x000 0x2 0x0
+#define MX6SL_PAD_I2C2_SDA__FEC_REF_OUT 0x168 0x458 0x000 0x3 0x0
+#define MX6SL_PAD_I2C2_SDA__SD3_CD_B 0x168 0x458 0x838 0x4 0x2
+#define MX6SL_PAD_I2C2_SDA__GPIO3_IO15 0x168 0x458 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL0__KEY_COL0 0x16c 0x474 0x734 0x0 0x0
+#define MX6SL_PAD_KEY_COL0__I2C2_SCL 0x16c 0x474 0x724 0x1 0x2
+#define MX6SL_PAD_KEY_COL0__LCD_DATA00 0x16c 0x474 0x778 0x2 0x0
+#define MX6SL_PAD_KEY_COL0__EIM_AD00 0x16c 0x474 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL0__SD1_CD_B 0x16c 0x474 0x828 0x4 0x2
+#define MX6SL_PAD_KEY_COL0__GPIO3_IO24 0x16c 0x474 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL1__KEY_COL1 0x170 0x478 0x738 0x0 0x0
+#define MX6SL_PAD_KEY_COL1__ECSPI4_MOSI 0x170 0x478 0x6d8 0x1 0x2
+#define MX6SL_PAD_KEY_COL1__LCD_DATA02 0x170 0x478 0x780 0x2 0x0
+#define MX6SL_PAD_KEY_COL1__EIM_AD02 0x170 0x478 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL1__SD3_DATA4 0x170 0x478 0x83c 0x4 0x0
+#define MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x170 0x478 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL2__KEY_COL2 0x174 0x47c 0x73c 0x0 0x0
+#define MX6SL_PAD_KEY_COL2__ECSPI4_SS0 0x174 0x47c 0x6dc 0x1 0x2
+#define MX6SL_PAD_KEY_COL2__LCD_DATA04 0x174 0x47c 0x788 0x2 0x0
+#define MX6SL_PAD_KEY_COL2__EIM_AD04 0x174 0x47c 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL2__SD3_DATA6 0x174 0x47c 0x844 0x4 0x0
+#define MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x174 0x47c 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL3__KEY_COL3 0x178 0x480 0x740 0x0 0x0
+#define MX6SL_PAD_KEY_COL3__AUD6_RXFS 0x178 0x480 0x620 0x1 0x1
+#define MX6SL_PAD_KEY_COL3__LCD_DATA06 0x178 0x480 0x790 0x2 0x0
+#define MX6SL_PAD_KEY_COL3__EIM_AD06 0x178 0x480 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL3__SD4_DATA6 0x178 0x480 0x874 0x4 0x1
+#define MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x178 0x480 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL3__SD1_RESET 0x178 0x480 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL4__KEY_COL4 0x17c 0x484 0x744 0x0 0x0
+#define MX6SL_PAD_KEY_COL4__AUD6_RXD 0x17c 0x484 0x614 0x1 0x1
+#define MX6SL_PAD_KEY_COL4__LCD_DATA08 0x17c 0x484 0x798 0x2 0x0
+#define MX6SL_PAD_KEY_COL4__EIM_AD08 0x17c 0x484 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL4__SD4_CLK 0x17c 0x484 0x850 0x4 0x2
+#define MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x17c 0x484 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL4__USB_OTG1_PWR 0x17c 0x484 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL5__KEY_COL5 0x180 0x488 0x748 0x0 0x0
+#define MX6SL_PAD_KEY_COL5__AUD6_TXFS 0x180 0x488 0x628 0x1 0x1
+#define MX6SL_PAD_KEY_COL5__LCD_DATA10 0x180 0x488 0x7a0 0x2 0x0
+#define MX6SL_PAD_KEY_COL5__EIM_AD10 0x180 0x488 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL5__SD4_DATA0 0x180 0x488 0x85c 0x4 0x2
+#define MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x180 0x488 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL5__USB_OTG2_PWR 0x180 0x488 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL6__KEY_COL6 0x184 0x48c 0x74c 0x0 0x0
+#define MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x184 0x48c 0x814 0x1 0x2
+#define MX6SL_PAD_KEY_COL6__UART4_TX_DATA 0x184 0x48c 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_COL6__LCD_DATA12 0x184 0x48c 0x7a8 0x2 0x0
+#define MX6SL_PAD_KEY_COL6__EIM_AD12 0x184 0x48c 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL6__SD4_DATA2 0x184 0x48c 0x864 0x4 0x2
+#define MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x184 0x48c 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL6__SD3_RESET 0x184 0x48c 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL7__KEY_COL7 0x188 0x490 0x750 0x0 0x0
+#define MX6SL_PAD_KEY_COL7__UART4_RTS_B 0x188 0x490 0x810 0x1 0x2
+#define MX6SL_PAD_KEY_COL7__UART4_CTS_B 0x188 0x490 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_COL7__LCD_DATA14 0x188 0x490 0x7b0 0x2 0x0
+#define MX6SL_PAD_KEY_COL7__EIM_AD14 0x188 0x490 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL7__SD4_DATA4 0x188 0x490 0x86c 0x4 0x1
+#define MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x188 0x490 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL7__SD1_WP 0x188 0x490 0x82c 0x6 0x2
+#define MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x18c 0x494 0x754 0x0 0x0
+#define MX6SL_PAD_KEY_ROW0__I2C2_SDA 0x18c 0x494 0x728 0x1 0x2
+#define MX6SL_PAD_KEY_ROW0__LCD_DATA01 0x18c 0x494 0x77c 0x2 0x0
+#define MX6SL_PAD_KEY_ROW0__EIM_AD01 0x18c 0x494 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW0__SD1_WP 0x18c 0x494 0x82c 0x4 0x3
+#define MX6SL_PAD_KEY_ROW0__GPIO3_IO25 0x18c 0x494 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x190 0x498 0x758 0x0 0x0
+#define MX6SL_PAD_KEY_ROW1__ECSPI4_MISO 0x190 0x498 0x6d4 0x1 0x2
+#define MX6SL_PAD_KEY_ROW1__LCD_DATA03 0x190 0x498 0x784 0x2 0x0
+#define MX6SL_PAD_KEY_ROW1__EIM_AD03 0x190 0x498 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW1__SD3_DATA5 0x190 0x498 0x840 0x4 0x0
+#define MX6SL_PAD_KEY_ROW1__GPIO3_IO27 0x190 0x498 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x194 0x49c 0x75c 0x0 0x0
+#define MX6SL_PAD_KEY_ROW2__ECSPI4_SCLK 0x194 0x49c 0x6d0 0x1 0x2
+#define MX6SL_PAD_KEY_ROW2__LCD_DATA05 0x194 0x49c 0x78c 0x2 0x0
+#define MX6SL_PAD_KEY_ROW2__EIM_AD05 0x194 0x49c 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW2__SD3_DATA7 0x194 0x49c 0x848 0x4 0x0
+#define MX6SL_PAD_KEY_ROW2__GPIO3_IO29 0x194 0x49c 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW3__KEY_ROW3 0x198 0x4a0 0x760 0x0 0x0
+#define MX6SL_PAD_KEY_ROW3__AUD6_RXC 0x198 0x4a0 0x61c 0x1 0x1
+#define MX6SL_PAD_KEY_ROW3__LCD_DATA07 0x198 0x4a0 0x794 0x2 0x0
+#define MX6SL_PAD_KEY_ROW3__EIM_AD07 0x198 0x4a0 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW3__SD4_DATA7 0x198 0x4a0 0x878 0x4 0x1
+#define MX6SL_PAD_KEY_ROW3__GPIO3_IO31 0x198 0x4a0 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW3__SD1_VSELECT 0x198 0x4a0 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_ROW4__KEY_ROW4 0x19c 0x4a4 0x764 0x0 0x0
+#define MX6SL_PAD_KEY_ROW4__AUD6_TXC 0x19c 0x4a4 0x624 0x1 0x1
+#define MX6SL_PAD_KEY_ROW4__LCD_DATA09 0x19c 0x4a4 0x79c 0x2 0x0
+#define MX6SL_PAD_KEY_ROW4__EIM_AD09 0x19c 0x4a4 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW4__SD4_CMD 0x19c 0x4a4 0x858 0x4 0x2
+#define MX6SL_PAD_KEY_ROW4__GPIO4_IO01 0x19c 0x4a4 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW4__USB_OTG1_OC 0x19c 0x4a4 0x824 0x6 0x1
+#define MX6SL_PAD_KEY_ROW5__KEY_ROW5 0x1a0 0x4a8 0x768 0x0 0x0
+#define MX6SL_PAD_KEY_ROW5__AUD6_TXD 0x1a0 0x4a8 0x618 0x1 0x1
+#define MX6SL_PAD_KEY_ROW5__LCD_DATA11 0x1a0 0x4a8 0x7a4 0x2 0x0
+#define MX6SL_PAD_KEY_ROW5__EIM_AD11 0x1a0 0x4a8 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW5__SD4_DATA1 0x1a0 0x4a8 0x860 0x4 0x2
+#define MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x1a0 0x4a8 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x1a0 0x4a8 0x820 0x6 0x2
+#define MX6SL_PAD_KEY_ROW6__KEY_ROW6 0x1a4 0x4ac 0x76c 0x0 0x0
+#define MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1a4 0x4ac 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_ROW6__UART4_RX_DATA 0x1a4 0x4ac 0x814 0x1 0x3
+#define MX6SL_PAD_KEY_ROW6__LCD_DATA13 0x1a4 0x4ac 0x7ac 0x2 0x0
+#define MX6SL_PAD_KEY_ROW6__EIM_AD13 0x1a4 0x4ac 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW6__SD4_DATA3 0x1a4 0x4ac 0x868 0x4 0x2
+#define MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x1a4 0x4ac 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW6__SD3_VSELECT 0x1a4 0x4ac 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_ROW7__KEY_ROW7 0x1a8 0x4b0 0x770 0x0 0x0
+#define MX6SL_PAD_KEY_ROW7__UART4_CTS_B 0x1a8 0x4b0 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_ROW7__UART4_RTS_B 0x1a8 0x4b0 0x810 0x1 0x3
+#define MX6SL_PAD_KEY_ROW7__LCD_DATA15 0x1a8 0x4b0 0x7b4 0x2 0x0
+#define MX6SL_PAD_KEY_ROW7__EIM_AD15 0x1a8 0x4b0 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW7__SD4_DATA5 0x1a8 0x4b0 0x870 0x4 0x1
+#define MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x1a8 0x4b0 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW7__SD1_CD_B 0x1a8 0x4b0 0x828 0x6 0x3
+#define MX6SL_PAD_LCD_CLK__LCD_CLK 0x1ac 0x4b4 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_CLK__SD4_DATA4 0x1ac 0x4b4 0x86c 0x1 0x2
+#define MX6SL_PAD_LCD_CLK__LCD_WR_RWN 0x1ac 0x4b4 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_CLK__EIM_RW 0x1ac 0x4b4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_CLK__PWM4_OUT 0x1ac 0x4b4 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x1ac 0x4b4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0 0x4b8 0x778 0x0 0x1
+#define MX6SL_PAD_LCD_DAT0__ECSPI1_MOSI 0x1b0 0x4b8 0x688 0x1 0x1
+#define MX6SL_PAD_LCD_DAT0__USB_OTG2_ID 0x1b0 0x4b8 0x5e0 0x2 0x1
+#define MX6SL_PAD_LCD_DAT0__PWM1_OUT 0x1b0 0x4b8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT0__UART5_DTR_B 0x1b0 0x4b8 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT0__GPIO2_IO20 0x1b0 0x4b8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT0__ARM_TRACE00 0x1b0 0x4b8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT0__SRC_BOOT_CFG00 0x1b0 0x4b8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b4 0x4bc 0x77c 0x0 0x1
+#define MX6SL_PAD_LCD_DAT1__ECSPI1_MISO 0x1b4 0x4bc 0x684 0x1 0x1
+#define MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x1b4 0x4bc 0x5dc 0x2 0x2
+#define MX6SL_PAD_LCD_DAT1__PWM2_OUT 0x1b4 0x4bc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT1__AUD4_RXFS 0x1b4 0x4bc 0x5f0 0x4 0x1
+#define MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x1b4 0x4bc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT1__ARM_TRACE01 0x1b4 0x4bc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT1__SRC_BOOT_CFG01 0x1b4 0x4bc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b8 0x4c0 0x7a0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT10__KEY_COL1 0x1b8 0x4c0 0x738 0x1 0x1
+#define MX6SL_PAD_LCD_DAT10__CSI_DATA07 0x1b8 0x4c0 0x64c 0x2 0x1
+#define MX6SL_PAD_LCD_DAT10__EIM_DATA04 0x1b8 0x4c0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT10__ECSPI2_MISO 0x1b8 0x4c0 0x6a0 0x4 0x2
+#define MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x1b8 0x4c0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT10__ARM_TRACE10 0x1b8 0x4c0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT10__SRC_BOOT_CFG10 0x1b8 0x4c0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1bc 0x4c4 0x7a4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT11__KEY_ROW1 0x1bc 0x4c4 0x758 0x1 0x1
+#define MX6SL_PAD_LCD_DAT11__CSI_DATA06 0x1bc 0x4c4 0x648 0x2 0x1
+#define MX6SL_PAD_LCD_DAT11__EIM_DATA05 0x1bc 0x4c4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT11__ECSPI2_SS1 0x1bc 0x4c4 0x6ac 0x4 0x1
+#define MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x1bc 0x4c4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT11__ARM_TRACE11 0x1bc 0x4c4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT11__SRC_BOOT_CFG11 0x1bc 0x4c4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1c0 0x4c8 0x7a8 0x0 0x1
+#define MX6SL_PAD_LCD_DAT12__KEY_COL2 0x1c0 0x4c8 0x73c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT12__CSI_DATA05 0x1c0 0x4c8 0x644 0x2 0x1
+#define MX6SL_PAD_LCD_DAT12__EIM_DATA06 0x1c0 0x4c8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT12__UART5_RTS_B 0x1c0 0x4c8 0x818 0x4 0x2
+#define MX6SL_PAD_LCD_DAT12__UART5_CTS_B 0x1c0 0x4c8 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x1c0 0x4c8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT12__ARM_TRACE12 0x1c0 0x4c8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT12__SRC_BOOT_CFG12 0x1c0 0x4c8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1c4 0x4cc 0x7ac 0x0 0x1
+#define MX6SL_PAD_LCD_DAT13__KEY_ROW2 0x1c4 0x4cc 0x75c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT13__CSI_DATA04 0x1c4 0x4cc 0x640 0x2 0x1
+#define MX6SL_PAD_LCD_DAT13__EIM_DATA07 0x1c4 0x4cc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT13__UART5_CTS_B 0x1c4 0x4cc 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT13__UART5_RTS_B 0x1c4 0x4cc 0x818 0x4 0x3
+#define MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x1c4 0x4cc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT13__ARM_TRACE13 0x1c4 0x4cc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT13__SRC_BOOT_CFG13 0x1c4 0x4cc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1c8 0x4d0 0x7b0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT14__KEY_COL3 0x1c8 0x4d0 0x740 0x1 0x1
+#define MX6SL_PAD_LCD_DAT14__CSI_DATA03 0x1c8 0x4d0 0x63c 0x2 0x1
+#define MX6SL_PAD_LCD_DAT14__EIM_DATA08 0x1c8 0x4d0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT14__UART5_RX_DATA 0x1c8 0x4d0 0x81c 0x4 0x2
+#define MX6SL_PAD_LCD_DAT14__UART5_TX_DATA 0x1c8 0x4d0 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x1c8 0x4d0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT14__ARM_TRACE14 0x1c8 0x4d0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT14__SRC_BOOT_CFG14 0x1c8 0x4d0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1cc 0x4d4 0x7b4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT15__KEY_ROW3 0x1cc 0x4d4 0x760 0x1 0x1
+#define MX6SL_PAD_LCD_DAT15__CSI_DATA02 0x1cc 0x4d4 0x638 0x2 0x1
+#define MX6SL_PAD_LCD_DAT15__EIM_DATA09 0x1cc 0x4d4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT15__UART5_TX_DATA 0x1cc 0x4d4 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT15__UART5_RX_DATA 0x1cc 0x4d4 0x81c 0x4 0x3
+#define MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x1cc 0x4d4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT15__ARM_TRACE15 0x1cc 0x4d4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT15__SRC_BOOT_CFG15 0x1cc 0x4d4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1d0 0x4d8 0x7b8 0x0 0x1
+#define MX6SL_PAD_LCD_DAT16__KEY_COL4 0x1d0 0x4d8 0x744 0x1 0x1
+#define MX6SL_PAD_LCD_DAT16__CSI_DATA01 0x1d0 0x4d8 0x634 0x2 0x1
+#define MX6SL_PAD_LCD_DAT16__EIM_DATA10 0x1d0 0x4d8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT16__I2C2_SCL 0x1d0 0x4d8 0x724 0x4 0x3
+#define MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x1d0 0x4d8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT16__ARM_TRACE16 0x1d0 0x4d8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT16__SRC_BOOT_CFG24 0x1d0 0x4d8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1d4 0x4dc 0x7bc 0x0 0x1
+#define MX6SL_PAD_LCD_DAT17__KEY_ROW4 0x1d4 0x4dc 0x764 0x1 0x1
+#define MX6SL_PAD_LCD_DAT17__CSI_DATA00 0x1d4 0x4dc 0x630 0x2 0x1
+#define MX6SL_PAD_LCD_DAT17__EIM_DATA11 0x1d4 0x4dc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT17__I2C2_SDA 0x1d4 0x4dc 0x728 0x4 0x3
+#define MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x1d4 0x4dc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT17__ARM_TRACE17 0x1d4 0x4dc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT17__SRC_BOOT_CFG25 0x1d4 0x4dc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1d8 0x4e0 0x7c0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT18__KEY_COL5 0x1d8 0x4e0 0x748 0x1 0x1
+#define MX6SL_PAD_LCD_DAT18__CSI_DATA15 0x1d8 0x4e0 0x66c 0x2 0x0
+#define MX6SL_PAD_LCD_DAT18__EIM_DATA12 0x1d8 0x4e0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT18__GPT_CAPTURE1 0x1d8 0x4e0 0x710 0x4 0x1
+#define MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x1d8 0x4e0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT18__ARM_TRACE18 0x1d8 0x4e0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT18__SRC_BOOT_CFG26 0x1d8 0x4e0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1dc 0x4e4 0x7c4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT19__KEY_ROW5 0x1dc 0x4e4 0x768 0x1 0x1
+#define MX6SL_PAD_LCD_DAT19__CSI_DATA14 0x1dc 0x4e4 0x668 0x2 0x0
+#define MX6SL_PAD_LCD_DAT19__EIM_DATA13 0x1dc 0x4e4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT19__GPT_CAPTURE2 0x1dc 0x4e4 0x714 0x4 0x1
+#define MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x1dc 0x4e4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT19__ARM_TRACE19 0x1dc 0x4e4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT19__SRC_BOOT_CFG27 0x1dc 0x4e4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1e0 0x4e8 0x780 0x0 0x1
+#define MX6SL_PAD_LCD_DAT2__ECSPI1_SS0 0x1e0 0x4e8 0x68c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT2__EPIT2_OUT 0x1e0 0x4e8 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_DAT2__PWM3_OUT 0x1e0 0x4e8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT2__AUD4_RXC 0x1e0 0x4e8 0x5ec 0x4 0x1
+#define MX6SL_PAD_LCD_DAT2__GPIO2_IO22 0x1e0 0x4e8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT2__ARM_TRACE02 0x1e0 0x4e8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT2__SRC_BOOT_CFG02 0x1e0 0x4e8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1e4 0x4ec 0x7c8 0x0 0x1
+#define MX6SL_PAD_LCD_DAT20__KEY_COL6 0x1e4 0x4ec 0x74c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT20__CSI_DATA13 0x1e4 0x4ec 0x664 0x2 0x0
+#define MX6SL_PAD_LCD_DAT20__EIM_DATA14 0x1e4 0x4ec 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT20__GPT_COMPARE1 0x1e4 0x4ec 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x1e4 0x4ec 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT20__ARM_TRACE20 0x1e4 0x4ec 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT20__SRC_BOOT_CFG28 0x1e4 0x4ec 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1e8 0x4f0 0x7cc 0x0 0x1
+#define MX6SL_PAD_LCD_DAT21__KEY_ROW6 0x1e8 0x4f0 0x76c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT21__CSI_DATA12 0x1e8 0x4f0 0x660 0x2 0x0
+#define MX6SL_PAD_LCD_DAT21__EIM_DATA15 0x1e8 0x4f0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT21__GPT_COMPARE2 0x1e8 0x4f0 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x1e8 0x4f0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT21__ARM_TRACE21 0x1e8 0x4f0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT21__SRC_BOOT_CFG29 0x1e8 0x4f0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1ec 0x4f4 0x7d0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT22__KEY_COL7 0x1ec 0x4f4 0x750 0x1 0x1
+#define MX6SL_PAD_LCD_DAT22__CSI_DATA11 0x1ec 0x4f4 0x65c 0x2 0x1
+#define MX6SL_PAD_LCD_DAT22__EIM_EB3_B 0x1ec 0x4f4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT22__GPT_COMPARE3 0x1ec 0x4f4 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x1ec 0x4f4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT22__ARM_TRACE22 0x1ec 0x4f4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT22__SRC_BOOT_CFG30 0x1ec 0x4f4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1f0 0x4f8 0x7d4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT23__KEY_ROW7 0x1f0 0x4f8 0x770 0x1 0x1
+#define MX6SL_PAD_LCD_DAT23__CSI_DATA10 0x1f0 0x4f8 0x658 0x2 0x1
+#define MX6SL_PAD_LCD_DAT23__EIM_EB2_B 0x1f0 0x4f8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT23__GPT_CLKIN 0x1f0 0x4f8 0x718 0x4 0x1
+#define MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x1f0 0x4f8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT23__ARM_TRACE23 0x1f0 0x4f8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT23__SRC_BOOT_CFG31 0x1f0 0x4f8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1f4 0x4fc 0x784 0x0 0x1
+#define MX6SL_PAD_LCD_DAT3__ECSPI1_SCLK 0x1f4 0x4fc 0x67c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT3__UART5_DSR_B 0x1f4 0x4fc 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_DAT3__PWM4_OUT 0x1f4 0x4fc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT3__AUD4_RXD 0x1f4 0x4fc 0x5e4 0x4 0x1
+#define MX6SL_PAD_LCD_DAT3__GPIO2_IO23 0x1f4 0x4fc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT3__ARM_TRACE03 0x1f4 0x4fc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT3__SRC_BOOT_CFG03 0x1f4 0x4fc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1f8 0x500 0x788 0x0 0x1
+#define MX6SL_PAD_LCD_DAT4__ECSPI1_SS1 0x1f8 0x500 0x690 0x1 0x1
+#define MX6SL_PAD_LCD_DAT4__CSI_VSYNC 0x1f8 0x500 0x678 0x2 0x2
+#define MX6SL_PAD_LCD_DAT4__WDOG2_RESET_B_DEB 0x1f8 0x500 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT4__AUD4_TXC 0x1f8 0x500 0x5f4 0x4 0x1
+#define MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x1f8 0x500 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT4__ARM_TRACE04 0x1f8 0x500 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT4__SRC_BOOT_CFG04 0x1f8 0x500 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1fc 0x504 0x78c 0x0 0x1
+#define MX6SL_PAD_LCD_DAT5__ECSPI1_SS2 0x1fc 0x504 0x694 0x1 0x1
+#define MX6SL_PAD_LCD_DAT5__CSI_HSYNC 0x1fc 0x504 0x670 0x2 0x2
+#define MX6SL_PAD_LCD_DAT5__EIM_CS3_B 0x1fc 0x504 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT5__AUD4_TXFS 0x1fc 0x504 0x5f8 0x4 0x1
+#define MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x1fc 0x504 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT5__ARM_TRACE05 0x1fc 0x504 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT5__SRC_BOOT_CFG05 0x1fc 0x504 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x200 0x508 0x790 0x0 0x1
+#define MX6SL_PAD_LCD_DAT6__ECSPI1_SS3 0x200 0x508 0x698 0x1 0x1
+#define MX6SL_PAD_LCD_DAT6__CSI_PIXCLK 0x200 0x508 0x674 0x2 0x2
+#define MX6SL_PAD_LCD_DAT6__EIM_DATA00 0x200 0x508 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT6__AUD4_TXD 0x200 0x508 0x5e8 0x4 0x1
+#define MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x200 0x508 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT6__ARM_TRACE06 0x200 0x508 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT6__SRC_BOOT_CFG06 0x200 0x508 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x204 0x50c 0x794 0x0 0x1
+#define MX6SL_PAD_LCD_DAT7__ECSPI1_RDY 0x204 0x50c 0x680 0x1 0x1
+#define MX6SL_PAD_LCD_DAT7__CSI_MCLK 0x204 0x50c 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_DAT7__EIM_DATA01 0x204 0x50c 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT7__AUDIO_CLK_OUT 0x204 0x50c 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x204 0x50c 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT7__ARM_TRACE07 0x204 0x50c 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT7__SRC_BOOT_CFG07 0x204 0x50c 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x208 0x510 0x798 0x0 0x1
+#define MX6SL_PAD_LCD_DAT8__KEY_COL0 0x208 0x510 0x734 0x1 0x1
+#define MX6SL_PAD_LCD_DAT8__CSI_DATA09 0x208 0x510 0x654 0x2 0x1
+#define MX6SL_PAD_LCD_DAT8__EIM_DATA02 0x208 0x510 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT8__ECSPI2_SCLK 0x208 0x510 0x69c 0x4 0x2
+#define MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x208 0x510 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT8__ARM_TRACE08 0x208 0x510 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT8__SRC_BOOT_CFG08 0x208 0x510 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x20c 0x514 0x79c 0x0 0x1
+#define MX6SL_PAD_LCD_DAT9__KEY_ROW0 0x20c 0x514 0x754 0x1 0x1
+#define MX6SL_PAD_LCD_DAT9__CSI_DATA08 0x20c 0x514 0x650 0x2 0x1
+#define MX6SL_PAD_LCD_DAT9__EIM_DATA03 0x20c 0x514 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT9__ECSPI2_MOSI 0x20c 0x514 0x6a4 0x4 0x2
+#define MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x20c 0x514 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT9__ARM_TRACE09 0x20c 0x514 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT9__SRC_BOOT_CFG09 0x20c 0x514 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x210 0x518 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_ENABLE__SD4_DATA5 0x210 0x518 0x870 0x1 0x2
+#define MX6SL_PAD_LCD_ENABLE__LCD_RD_E 0x210 0x518 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_ENABLE__EIM_OE_B 0x210 0x518 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_ENABLE__UART2_RX_DATA 0x210 0x518 0x804 0x4 0x2
+#define MX6SL_PAD_LCD_ENABLE__UART2_TX_DATA 0x210 0x518 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x210 0x518 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x214 0x51c 0x774 0x0 0x0
+#define MX6SL_PAD_LCD_HSYNC__SD4_DATA6 0x214 0x51c 0x874 0x1 0x2
+#define MX6SL_PAD_LCD_HSYNC__LCD_CS 0x214 0x51c 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_HSYNC__EIM_CS0_B 0x214 0x51c 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_HSYNC__UART2_TX_DATA 0x214 0x51c 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_HSYNC__UART2_RX_DATA 0x214 0x51c 0x804 0x4 0x3
+#define MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x214 0x51c 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_HSYNC__ARM_TRACE_CLK 0x214 0x51c 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_RESET__LCD_RESET 0x218 0x520 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_RESET__EIM_DTACK_B 0x218 0x520 0x880 0x1 0x1
+#define MX6SL_PAD_LCD_RESET__LCD_BUSY 0x218 0x520 0x774 0x2 0x1
+#define MX6SL_PAD_LCD_RESET__EIM_WAIT_B 0x218 0x520 0x884 0x3 0x1
+#define MX6SL_PAD_LCD_RESET__UART2_CTS_B 0x218 0x520 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_RESET__UART2_RTS_B 0x218 0x520 0x800 0x4 0x2
+#define MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x218 0x520 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_RESET__CCM_PMIC_READY 0x218 0x520 0x62c 0x6 0x1
+#define MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x21c 0x524 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_VSYNC__SD4_DATA7 0x21c 0x524 0x878 0x1 0x2
+#define MX6SL_PAD_LCD_VSYNC__LCD_RS 0x21c 0x524 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_VSYNC__EIM_CS1_B 0x21c 0x524 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_VSYNC__UART2_RTS_B 0x21c 0x524 0x800 0x4 0x3
+#define MX6SL_PAD_LCD_VSYNC__UART2_CTS_B 0x21c 0x524 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x21c 0x524 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_VSYNC__ARM_TRACE_CTL 0x21c 0x524 0x000 0x6 0x0
+#define MX6SL_PAD_PWM1__PWM1_OUT 0x220 0x528 0x000 0x0 0x0
+#define MX6SL_PAD_PWM1__CCM_CLKO 0x220 0x528 0x000 0x1 0x0
+#define MX6SL_PAD_PWM1__AUDIO_CLK_OUT 0x220 0x528 0x000 0x2 0x0
+#define MX6SL_PAD_PWM1__FEC_REF_OUT 0x220 0x528 0x000 0x3 0x0
+#define MX6SL_PAD_PWM1__CSI_MCLK 0x220 0x528 0x000 0x4 0x0
+#define MX6SL_PAD_PWM1__GPIO3_IO23 0x220 0x528 0x000 0x5 0x0
+#define MX6SL_PAD_PWM1__EPIT1_OUT 0x220 0x528 0x000 0x6 0x0
+#define MX6SL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x224 0x52c 0x000 0x0 0x0
+#define MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x224 0x52c 0x72c 0x1 0x2
+#define MX6SL_PAD_REF_CLK_24M__PWM3_OUT 0x224 0x52c 0x000 0x2 0x0
+#define MX6SL_PAD_REF_CLK_24M__USB_OTG2_ID 0x224 0x52c 0x5e0 0x3 0x2
+#define MX6SL_PAD_REF_CLK_24M__CCM_PMIC_READY 0x224 0x52c 0x62c 0x4 0x2
+#define MX6SL_PAD_REF_CLK_24M__GPIO3_IO21 0x224 0x52c 0x000 0x5 0x0
+#define MX6SL_PAD_REF_CLK_24M__SD3_WP 0x224 0x52c 0x84c 0x6 0x3
+#define MX6SL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x228 0x530 0x000 0x0 0x0
+#define MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x228 0x530 0x730 0x1 0x2
+#define MX6SL_PAD_REF_CLK_32K__PWM4_OUT 0x228 0x530 0x000 0x2 0x0
+#define MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x228 0x530 0x5dc 0x3 0x3
+#define MX6SL_PAD_REF_CLK_32K__SD1_LCTL 0x228 0x530 0x000 0x4 0x0
+#define MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x228 0x530 0x000 0x5 0x0
+#define MX6SL_PAD_REF_CLK_32K__SD3_CD_B 0x228 0x530 0x838 0x6 0x3
+#define MX6SL_PAD_SD1_CLK__SD1_CLK 0x22c 0x534 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_CLK__FEC_MDIO 0x22c 0x534 0x6f4 0x1 0x2
+#define MX6SL_PAD_SD1_CLK__KEY_COL0 0x22c 0x534 0x734 0x2 0x2
+#define MX6SL_PAD_SD1_CLK__EPDC_SDCE4 0x22c 0x534 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x22c 0x534 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_CMD__SD1_CMD 0x230 0x538 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_CMD__FEC_TX_CLK 0x230 0x538 0x70c 0x1 0x2
+#define MX6SL_PAD_SD1_CMD__KEY_ROW0 0x230 0x538 0x754 0x2 0x2
+#define MX6SL_PAD_SD1_CMD__EPDC_SDCE5 0x230 0x538 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_CMD__GPIO5_IO14 0x230 0x538 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x234 0x53c 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT0__FEC_RX_ER 0x234 0x53c 0x708 0x1 0x2
+#define MX6SL_PAD_SD1_DAT0__KEY_COL1 0x234 0x53c 0x738 0x2 0x2
+#define MX6SL_PAD_SD1_DAT0__EPDC_SDCE6 0x234 0x53c 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x234 0x53c 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x238 0x540 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT1__FEC_RX_DV 0x238 0x540 0x704 0x1 0x2
+#define MX6SL_PAD_SD1_DAT1__KEY_ROW1 0x238 0x540 0x758 0x2 0x2
+#define MX6SL_PAD_SD1_DAT1__EPDC_SDCE7 0x238 0x540 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x238 0x540 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x23c 0x544 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT2__FEC_RX_DATA1 0x23c 0x544 0x6fc 0x1 0x2
+#define MX6SL_PAD_SD1_DAT2__KEY_COL2 0x23c 0x544 0x73c 0x2 0x2
+#define MX6SL_PAD_SD1_DAT2__EPDC_SDCE8 0x23c 0x544 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x23c 0x544 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x240 0x548 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT3__FEC_TX_DATA0 0x240 0x548 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT3__KEY_ROW2 0x240 0x548 0x75c 0x2 0x2
+#define MX6SL_PAD_SD1_DAT3__EPDC_SDCE9 0x240 0x548 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x240 0x548 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x244 0x54c 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT4__FEC_MDC 0x244 0x54c 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT4__KEY_COL3 0x244 0x54c 0x740 0x2 0x2
+#define MX6SL_PAD_SD1_DAT4__EPDC_SDCLK_N 0x244 0x54c 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT4__UART4_RX_DATA 0x244 0x54c 0x814 0x4 0x4
+#define MX6SL_PAD_SD1_DAT4__UART4_TX_DATA 0x244 0x54c 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x244 0x54c 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x248 0x550 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT5__FEC_RX_DATA0 0x248 0x550 0x6f8 0x1 0x2
+#define MX6SL_PAD_SD1_DAT5__KEY_ROW3 0x248 0x550 0x760 0x2 0x2
+#define MX6SL_PAD_SD1_DAT5__EPDC_SDOED 0x248 0x550 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT5__UART4_TX_DATA 0x248 0x550 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT5__UART4_RX_DATA 0x248 0x550 0x814 0x4 0x5
+#define MX6SL_PAD_SD1_DAT5__GPIO5_IO09 0x248 0x550 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x24c 0x554 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT6__FEC_TX_EN 0x24c 0x554 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT6__KEY_COL4 0x24c 0x554 0x744 0x2 0x2
+#define MX6SL_PAD_SD1_DAT6__EPDC_SDOEZ 0x24c 0x554 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT6__UART4_RTS_B 0x24c 0x554 0x810 0x4 0x4
+#define MX6SL_PAD_SD1_DAT6__UART4_CTS_B 0x24c 0x554 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x24c 0x554 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x250 0x558 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT7__FEC_TX_DATA1 0x250 0x558 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT7__KEY_ROW4 0x250 0x558 0x764 0x2 0x2
+#define MX6SL_PAD_SD1_DAT7__CCM_PMIC_READY 0x250 0x558 0x62c 0x3 0x3
+#define MX6SL_PAD_SD1_DAT7__UART4_CTS_B 0x250 0x558 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT7__UART4_RTS_B 0x250 0x558 0x810 0x4 0x5
+#define MX6SL_PAD_SD1_DAT7__GPIO5_IO10 0x250 0x558 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_CLK__SD2_CLK 0x254 0x55c 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_CLK__AUD4_RXFS 0x254 0x55c 0x5f0 0x1 0x2
+#define MX6SL_PAD_SD2_CLK__ECSPI3_SCLK 0x254 0x55c 0x6b0 0x2 0x2
+#define MX6SL_PAD_SD2_CLK__CSI_DATA00 0x254 0x55c 0x630 0x3 0x2
+#define MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x254 0x55c 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_CMD__SD2_CMD 0x258 0x560 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_CMD__AUD4_RXC 0x258 0x560 0x5ec 0x1 0x2
+#define MX6SL_PAD_SD2_CMD__ECSPI3_SS0 0x258 0x560 0x6c0 0x2 0x2
+#define MX6SL_PAD_SD2_CMD__CSI_DATA01 0x258 0x560 0x634 0x3 0x2
+#define MX6SL_PAD_SD2_CMD__EPIT1_OUT 0x258 0x560 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x258 0x560 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x25c 0x564 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT0__AUD4_RXD 0x25c 0x564 0x5e4 0x1 0x2
+#define MX6SL_PAD_SD2_DAT0__ECSPI3_MOSI 0x25c 0x564 0x6bc 0x2 0x2
+#define MX6SL_PAD_SD2_DAT0__CSI_DATA02 0x25c 0x564 0x638 0x3 0x2
+#define MX6SL_PAD_SD2_DAT0__UART5_RTS_B 0x25c 0x564 0x818 0x4 0x4
+#define MX6SL_PAD_SD2_DAT0__UART5_CTS_B 0x25c 0x564 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x25c 0x564 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x260 0x568 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT1__AUD4_TXC 0x260 0x568 0x5f4 0x1 0x2
+#define MX6SL_PAD_SD2_DAT1__ECSPI3_MISO 0x260 0x568 0x6b8 0x2 0x2
+#define MX6SL_PAD_SD2_DAT1__CSI_DATA03 0x260 0x568 0x63c 0x3 0x2
+#define MX6SL_PAD_SD2_DAT1__UART5_CTS_B 0x260 0x568 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT1__UART5_RTS_B 0x260 0x568 0x818 0x4 0x5
+#define MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x260 0x568 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x264 0x56c 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT2__AUD4_TXFS 0x264 0x56c 0x5f8 0x1 0x2
+#define MX6SL_PAD_SD2_DAT2__FEC_COL 0x264 0x56c 0x6f0 0x2 0x1
+#define MX6SL_PAD_SD2_DAT2__CSI_DATA04 0x264 0x56c 0x640 0x3 0x2
+#define MX6SL_PAD_SD2_DAT2__UART5_RX_DATA 0x264 0x56c 0x81c 0x4 0x4
+#define MX6SL_PAD_SD2_DAT2__UART5_TX_DATA 0x264 0x56c 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x264 0x56c 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x268 0x570 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT3__AUD4_TXD 0x268 0x570 0x5e8 0x1 0x2
+#define MX6SL_PAD_SD2_DAT3__FEC_RX_CLK 0x268 0x570 0x700 0x2 0x1
+#define MX6SL_PAD_SD2_DAT3__CSI_DATA05 0x268 0x570 0x644 0x3 0x2
+#define MX6SL_PAD_SD2_DAT3__UART5_TX_DATA 0x268 0x570 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT3__UART5_RX_DATA 0x268 0x570 0x81c 0x4 0x5
+#define MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x268 0x570 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x26c 0x574 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT4__SD3_DATA4 0x26c 0x574 0x83c 0x1 0x1
+#define MX6SL_PAD_SD2_DAT4__UART2_RX_DATA 0x26c 0x574 0x804 0x2 0x4
+#define MX6SL_PAD_SD2_DAT4__UART2_TX_DATA 0x26c 0x574 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT4__CSI_DATA06 0x26c 0x574 0x648 0x3 0x2
+#define MX6SL_PAD_SD2_DAT4__SPDIF_OUT 0x26c 0x574 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT4__GPIO5_IO02 0x26c 0x574 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x270 0x578 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT5__SD3_DATA5 0x270 0x578 0x840 0x1 0x1
+#define MX6SL_PAD_SD2_DAT5__UART2_TX_DATA 0x270 0x578 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT5__UART2_RX_DATA 0x270 0x578 0x804 0x2 0x5
+#define MX6SL_PAD_SD2_DAT5__CSI_DATA07 0x270 0x578 0x64c 0x3 0x2
+#define MX6SL_PAD_SD2_DAT5__SPDIF_IN 0x270 0x578 0x7f0 0x4 0x2
+#define MX6SL_PAD_SD2_DAT5__GPIO4_IO31 0x270 0x578 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x274 0x57c 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT6__SD3_DATA6 0x274 0x57c 0x844 0x1 0x1
+#define MX6SL_PAD_SD2_DAT6__UART2_RTS_B 0x274 0x57c 0x800 0x2 0x4
+#define MX6SL_PAD_SD2_DAT6__UART2_CTS_B 0x274 0x57c 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT6__CSI_DATA08 0x274 0x57c 0x650 0x3 0x2
+#define MX6SL_PAD_SD2_DAT6__SD2_WP 0x274 0x57c 0x834 0x4 0x2
+#define MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x274 0x57c 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x278 0x580 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT7__SD3_DATA7 0x278 0x580 0x848 0x1 0x1
+#define MX6SL_PAD_SD2_DAT7__UART2_CTS_B 0x278 0x580 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT7__UART2_RTS_B 0x278 0x580 0x800 0x2 0x5
+#define MX6SL_PAD_SD2_DAT7__CSI_DATA09 0x278 0x580 0x654 0x3 0x2
+#define MX6SL_PAD_SD2_DAT7__SD2_CD_B 0x278 0x580 0x830 0x4 0x2
+#define MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x278 0x580 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_RST__SD2_RESET 0x27c 0x584 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_RST__FEC_REF_OUT 0x27c 0x584 0x000 0x1 0x0
+#define MX6SL_PAD_SD2_RST__WDOG2_B 0x27c 0x584 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_RST__SPDIF_OUT 0x27c 0x584 0x000 0x3 0x0
+#define MX6SL_PAD_SD2_RST__CSI_MCLK 0x27c 0x584 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_RST__GPIO4_IO27 0x27c 0x584 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_CLK__SD3_CLK 0x280 0x588 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_CLK__AUD5_RXFS 0x280 0x588 0x608 0x1 0x1
+#define MX6SL_PAD_SD3_CLK__KEY_COL5 0x280 0x588 0x748 0x2 0x2
+#define MX6SL_PAD_SD3_CLK__CSI_DATA10 0x280 0x588 0x658 0x3 0x2
+#define MX6SL_PAD_SD3_CLK__WDOG1_RESET_B_DEB 0x280 0x588 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x280 0x588 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_CLK__USB_OTG1_PWR 0x280 0x588 0x000 0x6 0x0
+#define MX6SL_PAD_SD3_CMD__SD3_CMD 0x284 0x58c 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_CMD__AUD5_RXC 0x284 0x58c 0x604 0x1 0x1
+#define MX6SL_PAD_SD3_CMD__KEY_ROW5 0x284 0x58c 0x768 0x2 0x2
+#define MX6SL_PAD_SD3_CMD__CSI_DATA11 0x284 0x58c 0x65c 0x3 0x2
+#define MX6SL_PAD_SD3_CMD__USB_OTG2_ID 0x284 0x58c 0x5e0 0x4 0x3
+#define MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x284 0x58c 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_CMD__USB_OTG2_PWR 0x284 0x58c 0x000 0x6 0x0
+#define MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x288 0x590 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT0__AUD5_RXD 0x288 0x590 0x5fc 0x1 0x1
+#define MX6SL_PAD_SD3_DAT0__KEY_COL6 0x288 0x590 0x74c 0x2 0x2
+#define MX6SL_PAD_SD3_DAT0__CSI_DATA12 0x288 0x590 0x660 0x3 0x1
+#define MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x288 0x590 0x5dc 0x4 0x4
+#define MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x288 0x590 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x28c 0x594 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT1__AUD5_TXC 0x28c 0x594 0x60c 0x1 0x1
+#define MX6SL_PAD_SD3_DAT1__KEY_ROW6 0x28c 0x594 0x76c 0x2 0x2
+#define MX6SL_PAD_SD3_DAT1__CSI_DATA13 0x28c 0x594 0x664 0x3 0x1
+#define MX6SL_PAD_SD3_DAT1__SD1_VSELECT 0x28c 0x594 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x28c 0x594 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT1__JTAG_DE_B 0x28c 0x594 0x000 0x6 0x0
+#define MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x290 0x598 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT2__AUD5_TXFS 0x290 0x598 0x610 0x1 0x1
+#define MX6SL_PAD_SD3_DAT2__KEY_COL7 0x290 0x598 0x750 0x2 0x2
+#define MX6SL_PAD_SD3_DAT2__CSI_DATA14 0x290 0x598 0x668 0x3 0x1
+#define MX6SL_PAD_SD3_DAT2__EPIT1_OUT 0x290 0x598 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x290 0x598 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x290 0x598 0x820 0x6 0x3
+#define MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x294 0x59c 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT3__AUD5_TXD 0x294 0x59c 0x600 0x1 0x1
+#define MX6SL_PAD_SD3_DAT3__KEY_ROW7 0x294 0x59c 0x770 0x2 0x2
+#define MX6SL_PAD_SD3_DAT3__CSI_DATA15 0x294 0x59c 0x66c 0x3 0x1
+#define MX6SL_PAD_SD3_DAT3__EPIT2_OUT 0x294 0x59c 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x294 0x59c 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT3__USB_OTG1_OC 0x294 0x59c 0x824 0x6 0x2
+#define MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x298 0x5a0 0x7fc 0x0 0x0
+#define MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x298 0x5a0 0x000 0x0 0x0
+#define MX6SL_PAD_UART1_RXD__PWM1_OUT 0x298 0x5a0 0x000 0x1 0x0
+#define MX6SL_PAD_UART1_RXD__UART4_RX_DATA 0x298 0x5a0 0x814 0x2 0x6
+#define MX6SL_PAD_UART1_RXD__UART4_TX_DATA 0x298 0x5a0 0x000 0x2 0x0
+#define MX6SL_PAD_UART1_RXD__FEC_COL 0x298 0x5a0 0x6f0 0x3 0x2
+#define MX6SL_PAD_UART1_RXD__UART5_RX_DATA 0x298 0x5a0 0x81c 0x4 0x6
+#define MX6SL_PAD_UART1_RXD__UART5_TX_DATA 0x298 0x5a0 0x000 0x4 0x0
+#define MX6SL_PAD_UART1_RXD__GPIO3_IO16 0x298 0x5a0 0x000 0x5 0x0
+#define MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x29c 0x5a4 0x000 0x0 0x0
+#define MX6SL_PAD_UART1_TXD__UART1_RX_DATA 0x29c 0x5a4 0x7fc 0x0 0x1
+#define MX6SL_PAD_UART1_TXD__PWM2_OUT 0x29c 0x5a4 0x000 0x1 0x0
+#define MX6SL_PAD_UART1_TXD__UART4_TX_DATA 0x29c 0x5a4 0x000 0x2 0x0
+#define MX6SL_PAD_UART1_TXD__UART4_RX_DATA 0x29c 0x5a4 0x814 0x2 0x7
+#define MX6SL_PAD_UART1_TXD__FEC_RX_CLK 0x29c 0x5a4 0x700 0x3 0x2
+#define MX6SL_PAD_UART1_TXD__UART5_TX_DATA 0x29c 0x5a4 0x000 0x4 0x0
+#define MX6SL_PAD_UART1_TXD__UART5_RX_DATA 0x29c 0x5a4 0x81c 0x4 0x7
+#define MX6SL_PAD_UART1_TXD__GPIO3_IO17 0x29c 0x5a4 0x000 0x5 0x0
+#define MX6SL_PAD_UART1_TXD__UART5_DCD_B 0x29c 0x5a4 0x000 0x7 0x0
+#define MX6SL_PAD_WDOG_B__WDOG1_B 0x2a0 0x5a8 0x000 0x0 0x0
+#define MX6SL_PAD_WDOG_B__WDOG1_RESET_B_DEB 0x2a0 0x5a8 0x000 0x1 0x0
+#define MX6SL_PAD_WDOG_B__UART5_RI_B 0x2a0 0x5a8 0x000 0x2 0x0
+#define MX6SL_PAD_WDOG_B__GPIO3_IO18 0x2a0 0x5a8 0x000 0x5 0x0
+
+#endif /* __DTS_IMX6SL_PINFUNC_H */
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6sl-pinfunc.h"
+#include <dt-bindings/clock/imx6sl-clock.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ * Also for U-Boot there must be a pre-existing /memory node.
+ */
+ chosen {};
+ memory { device_type = "memory"; reg = <0 0>; };
+
+ aliases {
+ ethernet0 = &fec;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ spi3 = &ecspi4;
+ usbphy0 = &usbphy1;
+ usbphy1 = &usbphy2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 996000 1275000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1225000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
+ <&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
+ <&clks IMX6SL_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
+ };
+ };
+
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gpc>;
+ ranges;
+
+ ocram: sram@00900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x20000>;
+ clocks = <&clks IMX6SL_CLK_OCRAM>;
+ };
+
+ L2: l2-cache@00a02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a02000 0x1000>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ arm,tag-latency = <4 2 3>;
+ arm,data-latency = <4 2 3>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ aips1: aips-bus@02000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba: spba-bus@02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ spdif: spdif@02004000 {
+ compatible = "fsl,imx6sl-spdif",
+ "fsl,imx35-spdif";
+ reg = <0x02004000 0x4000>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 14 18 0>,
+ <&sdma 15 18 0>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>,
+ <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>,
+ <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>,
+ <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>,
+ <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>;
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7", "spba";
+ status = "disabled";
+ };
+
+ ecspi1: ecspi@02008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_ECSPI1>,
+ <&clks IMX6SL_CLK_ECSPI1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@0200c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_ECSPI2>,
+ <&clks IMX6SL_CLK_ECSPI2>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi3: ecspi@02010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_ECSPI3>,
+ <&clks IMX6SL_CLK_ECSPI3>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi4: ecspi@02014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_ECSPI4>,
+ <&clks IMX6SL_CLK_ECSPI4>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart5: serial@02018000 {
+ compatible = "fsl,imx6sl-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02018000 0x4000>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_UART>,
+ <&clks IMX6SL_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart1: serial@02020000 {
+ compatible = "fsl,imx6sl-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_UART>,
+ <&clks IMX6SL_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@02024000 {
+ compatible = "fsl,imx6sl-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02024000 0x4000>;
+ interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_UART>,
+ <&clks IMX6SL_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ ssi1: ssi@02028000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx6sl-ssi",
+ "fsl,imx51-ssi";
+ reg = <0x02028000 0x4000>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_SSI1_IPG>,
+ <&clks IMX6SL_CLK_SSI1>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 37 1 0>,
+ <&sdma 38 1 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@0202c000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx6sl-ssi",
+ "fsl,imx51-ssi";
+ reg = <0x0202c000 0x4000>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_SSI2_IPG>,
+ <&clks IMX6SL_CLK_SSI2>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 41 1 0>,
+ <&sdma 42 1 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ ssi3: ssi@02030000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx6sl-ssi",
+ "fsl,imx51-ssi";
+ reg = <0x02030000 0x4000>;
+ interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_SSI3_IPG>,
+ <&clks IMX6SL_CLK_SSI3>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 45 1 0>,
+ <&sdma 46 1 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ uart3: serial@02034000 {
+ compatible = "fsl,imx6sl-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02034000 0x4000>;
+ interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_UART>,
+ <&clks IMX6SL_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart4: serial@02038000 {
+ compatible = "fsl,imx6sl-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02038000 0x4000>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_UART>,
+ <&clks IMX6SL_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ };
+
+ pwm1: pwm@02080000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+ reg = <0x02080000 0x4000>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_PWM1>,
+ <&clks IMX6SL_CLK_PWM1>;
+ clock-names = "ipg", "per";
+ };
+
+ pwm2: pwm@02084000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+ reg = <0x02084000 0x4000>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_PWM2>,
+ <&clks IMX6SL_CLK_PWM2>;
+ clock-names = "ipg", "per";
+ };
+
+ pwm3: pwm@02088000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+ reg = <0x02088000 0x4000>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_PWM3>,
+ <&clks IMX6SL_CLK_PWM3>;
+ clock-names = "ipg", "per";
+ };
+
+ pwm4: pwm@0208c000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+ reg = <0x0208c000 0x4000>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_PWM4>,
+ <&clks IMX6SL_CLK_PWM4>;
+ clock-names = "ipg", "per";
+ };
+
+ gpt: gpt@02098000 {
+ compatible = "fsl,imx6sl-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_GPT>,
+ <&clks IMX6SL_CLK_GPT_SERIAL>;
+ clock-names = "ipg", "per";
+ };
+
+ gpio1: gpio@0209c000 {
+ compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+ <0 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 22 1>, <&iomuxc 1 20 2>,
+ <&iomuxc 3 23 1>, <&iomuxc 4 25 1>,
+ <&iomuxc 5 24 1>, <&iomuxc 6 19 1>,
+ <&iomuxc 7 36 2>, <&iomuxc 9 44 8>,
+ <&iomuxc 17 38 6>, <&iomuxc 23 68 4>,
+ <&iomuxc 27 64 4>, <&iomuxc 31 52 1>;
+ };
+
+ gpio2: gpio@020a0000 {
+ compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 53 3>, <&iomuxc 3 72 2>,
+ <&iomuxc 5 34 2>, <&iomuxc 7 57 4>,
+ <&iomuxc 11 56 1>, <&iomuxc 12 61 3>,
+ <&iomuxc 15 107 1>, <&iomuxc 16 132 2>,
+ <&iomuxc 18 135 1>, <&iomuxc 19 134 1>,
+ <&iomuxc 20 108 2>, <&iomuxc 22 120 1>,
+ <&iomuxc 23 125 7>, <&iomuxc 30 110 2>;
+ };
+
+ gpio3: gpio@020a4000 {
+ compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 112 8>, <&iomuxc 8 121 4>,
+ <&iomuxc 12 97 4>, <&iomuxc 16 166 3>,
+ <&iomuxc 19 85 2>, <&iomuxc 21 137 2>,
+ <&iomuxc 23 136 1>, <&iomuxc 24 91 1>,
+ <&iomuxc 25 99 1>, <&iomuxc 26 92 1>,
+ <&iomuxc 27 100 1>, <&iomuxc 28 93 1>,
+ <&iomuxc 29 101 1>, <&iomuxc 30 94 1>,
+ <&iomuxc 31 102 1>;
+ };
+
+ gpio4: gpio@020a8000 {
+ compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+ <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 95 1>, <&iomuxc 1 103 1>,
+ <&iomuxc 2 96 1>, <&iomuxc 3 104 1>,
+ <&iomuxc 4 97 1>, <&iomuxc 5 105 1>,
+ <&iomuxc 6 98 1>, <&iomuxc 7 106 1>,
+ <&iomuxc 8 28 1>, <&iomuxc 9 27 1>,
+ <&iomuxc 10 26 1>, <&iomuxc 11 29 1>,
+ <&iomuxc 12 32 1>, <&iomuxc 13 31 1>,
+ <&iomuxc 14 30 1>, <&iomuxc 15 33 1>,
+ <&iomuxc 16 84 1>, <&iomuxc 17 79 2>,
+ <&iomuxc 19 78 1>, <&iomuxc 20 76 1>,
+ <&iomuxc 21 81 2>, <&iomuxc 23 75 1>,
+ <&iomuxc 24 83 1>, <&iomuxc 25 74 1>,
+ <&iomuxc 26 77 1>, <&iomuxc 27 159 1>,
+ <&iomuxc 28 154 1>, <&iomuxc 29 157 1>,
+ <&iomuxc 30 152 1>, <&iomuxc 31 156 1>;
+ };
+
+ gpio5: gpio@020ac000 {
+ compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+ <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 158 1>, <&iomuxc 1 151 1>,
+ <&iomuxc 2 155 1>, <&iomuxc 3 153 1>,
+ <&iomuxc 4 150 1>, <&iomuxc 5 149 1>,
+ <&iomuxc 6 144 1>, <&iomuxc 7 147 1>,
+ <&iomuxc 8 142 1>, <&iomuxc 9 146 1>,
+ <&iomuxc 10 148 1>, <&iomuxc 11 141 1>,
+ <&iomuxc 12 145 1>, <&iomuxc 13 143 1>,
+ <&iomuxc 14 140 1>, <&iomuxc 15 139 1>,
+ <&iomuxc 16 164 2>, <&iomuxc 18 160 1>,
+ <&iomuxc 19 162 1>, <&iomuxc 20 163 1>,
+ <&iomuxc 21 161 1>;
+ };
+
+ kpp: kpp@020b8000 {
+ compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
+ reg = <0x020b8000 0x4000>;
+ interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ wdog1: wdog@020bc000 {
+ compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_DUMMY>;
+ };
+
+ wdog2: wdog@020c0000 {
+ compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ clks: ccm@020c4000 {
+ compatible = "fsl,imx6sl-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ };
+
+ anatop: anatop@020c8000 {
+ compatible = "fsl,imx6sl-anatop",
+ "fsl,imx6q-anatop",
+ "syscon", "simple-bus";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+ <0 54 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
+
+ regulator-1p1 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd1p1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x110>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <4>;
+ anatop-min-voltage = <800000>;
+ anatop-max-voltage = <1375000>;
+ };
+
+ regulator-3p0 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x120>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2625000>;
+ anatop-max-voltage = <3400000>;
+ };
+
+ regulator-2p5 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd2p5";
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x130>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2100000>;
+ anatop-max-voltage = <2850000>;
+ };
+
+ reg_arm: regulator-vddcore {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddarm";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <0>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <24>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ reg_pu: regulator-vddpu {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <9>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <26>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ reg_soc: regulator-vddsoc {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <18>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <28>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+ };
+
+ tempmon: tempmon {
+ compatible = "fsl,imx6q-tempmon";
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ fsl,tempmon-data = <&ocotp>;
+ clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+ };
+
+ usbphy1: usbphy@020c9000 {
+ compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020c9000 0x1000>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_USBPHY1>;
+ fsl,anatop = <&anatop>;
+ };
+
+ usbphy2: usbphy@020ca000 {
+ compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020ca000 0x1000>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_USBPHY2>;
+ fsl,anatop = <&anatop>;
+ };
+
+ snvs: snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
+
+ snvs_rtc: snvs-rtc-lp {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ regmap = <&snvs>;
+ offset = <0x34>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ snvs_poweroff: snvs-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&snvs>;
+ offset = <0x38>;
+ mask = <0x60>;
+ status = "disabled";
+ };
+ };
+
+ epit1: epit@020d0000 {
+ reg = <0x020d0000 0x4000>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ epit2: epit@020d4000 {
+ reg = <0x020d4000 0x4000>;
+ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ src: src@020d8000 {
+ compatible = "fsl,imx6sl-src", "fsl,imx51-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+ <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+
+ gpc: gpc@020dc000 {
+ compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ pu-supply = <®_pu>;
+ clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
+ <&clks IMX6SL_CLK_GPU2D_PODF>;
+ #power-domain-cells = <1>;
+ };
+
+ gpr: iomuxc-gpr@020e0000 {
+ compatible = "fsl,imx6sl-iomuxc-gpr",
+ "fsl,imx6q-iomuxc-gpr", "syscon";
+ reg = <0x020e0000 0x38>;
+ };
+
+ iomuxc: iomuxc@020e0000 {
+ compatible = "fsl,imx6sl-iomuxc";
+ reg = <0x020e0000 0x4000>;
+ };
+
+ csi: csi@020e4000 {
+ reg = <0x020e4000 0x4000>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ spdc: spdc@020e8000 {
+ reg = <0x020e8000 0x4000>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sdma: sdma@020ec000 {
+ compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_SDMA>,
+ <&clks IMX6SL_CLK_SDMA>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ /* imx6sl reuses imx6q sdma firmware */
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+ };
+
+ pxp: pxp@020f0000 {
+ reg = <0x020f0000 0x4000>;
+ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ epdc: epdc@020f4000 {
+ reg = <0x020f4000 0x4000>;
+ interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ lcdif: lcdif@020f8000 {
+ compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif";
+ reg = <0x020f8000 0x4000>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_LCDIF_PIX>,
+ <&clks IMX6SL_CLK_LCDIF_AXI>,
+ <&clks IMX6SL_CLK_DUMMY>;
+ clock-names = "pix", "axi", "disp_axi";
+ status = "disabled";
+ };
+
+ dcp: dcp@020fc000 {
+ compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
+ reg = <0x020fc000 0x4000>;
+ interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
+ <0 100 IRQ_TYPE_LEVEL_HIGH>,
+ <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ aips2: aips-bus@02100000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ usbotg1: usb@02184000 {
+ compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+ reg = <0x02184000 0x200>;
+ interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ status = "disabled";
+ };
+
+ usbotg2: usb@02184200 {
+ compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+ reg = <0x02184200 0x200>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc 1>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ status = "disabled";
+ };
+
+ usbh: usb@02184400 {
+ compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+ reg = <0x02184400 0x200>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_USBOH3>;
+ fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@02184800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x02184800 0x200>;
+ clocks = <&clks IMX6SL_CLK_USBOH3>;
+ };
+
+ fec: ethernet@02188000 {
+ compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_ENET>,
+ <&clks IMX6SL_CLK_ENET_REF>;
+ clock-names = "ipg", "ahb";
+ status = "disabled";
+ };
+
+ usdhc1: usdhc@02190000 {
+ compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_USDHC1>,
+ <&clks IMX6SL_CLK_USDHC1>,
+ <&clks IMX6SL_CLK_USDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: usdhc@02194000 {
+ compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_USDHC2>,
+ <&clks IMX6SL_CLK_USDHC2>,
+ <&clks IMX6SL_CLK_USDHC2>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc3: usdhc@02198000 {
+ compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_USDHC3>,
+ <&clks IMX6SL_CLK_USDHC3>,
+ <&clks IMX6SL_CLK_USDHC3>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc4: usdhc@0219c000 {
+ compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+ reg = <0x0219c000 0x4000>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_USDHC4>,
+ <&clks IMX6SL_CLK_USDHC4>,
+ <&clks IMX6SL_CLK_USDHC4>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@021a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@021a4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_I2C2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@021a8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_I2C3>;
+ status = "disabled";
+ };
+
+ mmdc: mmdc@021b0000 {
+ compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ rngb: rngb@021b4000 {
+ reg = <0x021b4000 0x4000>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ weim: weim@021b8000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x021b8000 0x4000>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,weim-cs-gpr = <&gpr>;
+ status = "disabled";
+ };
+
+ ocotp: ocotp@021bc000 {
+ compatible = "fsl,imx6sl-ocotp", "syscon";
+ reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6SL_CLK_OCOTP>;
+ };
+
+ audmux: audmux@021d8000 {
+ compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
+ reg = <0x021d8000 0x4000>;
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 16 MiB reserved for Hardware ROM Firmware */
+ hwrom_reserved: hwrom@0 {
+ reg = <0x0 0x0 0x0 0x1000000>;
+ no-map;
+ };
+
+ /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon@10000000 {
+ reg = <0x0 0x10000000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ cpus {
+ #address-cells = <0x2>;
+ #size-cells = <0x0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+ firmware {
+ sm: secure-monitor {
+ compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
+ };
+ };
+
+ efuse: efuse {
+ compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sn: sn@14 {
+ reg = <0x14 0x10>;
+ };
+
+ eth_mac: eth_mac@34 {
+ reg = <0x34 0x10>;
+ };
+
+ bid: bid@46 {
+ reg = <0x46 0x30>;
+ };
+ };
+
+ scpi {
+ compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+ mboxes = <&mailbox 1 &mailbox 2>;
+ shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+ scpi_clocks: clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>;
+ clock-output-names = "vcpu";
+ };
+ };
+
+ scpi_sensors: sensors {
+ compatible = "arm,scpi-sensors";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ cbus: cbus@c1100000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc1100000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+
+ reset: reset-controller@4404 {
+ compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
+ reg = <0x0 0x04404 0x0 0x20>;
+ #reset-cells = <1>;
+ };
+
+ uart_A: serial@84c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x0 0x84c0 0x0 0x14>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>;
+ status = "disabled";
+ };
+
+ uart_B: serial@84dc {
+ compatible = "amlogic,meson-uart";
+ reg = <0x0 0x84dc 0x0 0x14>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>;
+ status = "disabled";
+ };
+
+ i2c_A: i2c@8500 {
+ compatible = "amlogic,meson-gxbb-i2c";
+ reg = <0x0 0x08500 0x0 0x20>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm_ab: pwm@8550 {
+ compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ reg = <0x0 0x08550 0x0 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_cd: pwm@8650 {
+ compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ reg = <0x0 0x08650 0x0 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_ef: pwm@86c0 {
+ compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ reg = <0x0 0x086c0 0x0 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ uart_C: serial@8700 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x0 0x8700 0x0 0x14>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>;
+ status = "disabled";
+ };
+
+ i2c_B: i2c@87c0 {
+ compatible = "amlogic,meson-gxbb-i2c";
+ reg = <0x0 0x087c0 0x0 0x20>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c_C: i2c@87e0 {
+ compatible = "amlogic,meson-gxbb-i2c";
+ reg = <0x0 0x087e0 0x0 0x20>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ watchdog@98d0 {
+ compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
+ reg = <0x0 0x098d0 0x0 0x10>;
+ clocks = <&xtal>;
+ };
+ };
+
+ gic: interrupt-controller@c4301000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xc4301000 0 0x1000>,
+ <0x0 0xc4302000 0 0x2000>,
+ <0x0 0xc4304000 0 0x2000>,
+ <0x0 0xc4306000 0 0x2000>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ };
+
+ sram: sram@c8000000 {
+ compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+ reg = <0x0 0xc8000000 0x0 0x14000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0xc8000000 0x14000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "amlogic,meson-gxbb-scp-shmem";
+ reg = <0x13000 0x400>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "amlogic,meson-gxbb-scp-shmem";
+ reg = <0x13400 0x400>;
+ };
+ };
+
+ aobus: aobus@c8100000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc8100000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+
+ uart_AO: serial@4c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x0 0x004c0 0x0 0x14>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>;
+ status = "disabled";
+ };
+
+ uart_AO_B: serial@4e0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x0 0x004e0 0x0 0x14>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>;
+ status = "disabled";
+ };
+
+ ir: ir@580 {
+ compatible = "amlogic,meson-gxbb-ir";
+ reg = <0x0 0x00580 0x0 0x40>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+ };
+
+ periphs: periphs@c8834000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc8834000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+
+ rng {
+ compatible = "amlogic,meson-rng";
+ reg = <0x0 0x0 0x0 0x4>;
+ };
+ };
+
+
+ hiubus: hiubus@c883c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc883c000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+ mailbox: mailbox@404 {
+ compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
+ reg = <0 0x404 0 0x4c>;
+ interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
+ <0 209 IRQ_TYPE_EDGE_RISING>,
+ <0 210 IRQ_TYPE_EDGE_RISING>;
+ #mbox-cells = <1>;
+ };
+ };
+
+ ethmac: ethernet@c9410000 {
+ compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+ reg = <0x0 0xc9410000 0x0 0x10000
+ 0x0 0xc8834540 0x0 0x4>;
+ interrupts = <0 8 1>;
+ interrupt-names = "macirq";
+ phy-mode = "rgmii";
+ status = "disabled";
+ };
+
+ apb: apb@d0000000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xd0000000 0x0 0x200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+
+ sd_emmc_a: mmc@70000 {
+ compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+ reg = <0x0 0x70000 0x0 0x2000>;
+ interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ sd_emmc_b: mmc@72000 {
+ compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+ reg = <0x0 0x72000 0x0 0x2000>;
+ interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ sd_emmc_c: mmc@74000 {
+ compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+ reg = <0x0 0x74000 0x0 0x2000>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+ };
+
+ vpu: vpu@d0100000 {
+ compatible = "amlogic,meson-gx-vpu";
+ reg = <0x0 0xd0100000 0x0 0x100000>,
+ <0x0 0xc883c000 0x0 0x1000>,
+ <0x0 0xc8838000 0x0 0x1000>;
+ reg-names = "vpu", "hhi", "dmc";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* CVBS VDAC output port */
+ cvbs_vdac_port: port@0 {
+ reg = <0>;
+ };
+ };
+ };
+};
reg = <0x0 0x0 0x0 0x80000000>;
};
+ usb_otg_pwr: regulator-usb-pwrs {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_OTG_PWR";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
leds {
compatible = "gpio-leds";
blue {
default-state = "off";
};
};
+
+ tflash_vdd: regulator-tflash_vdd {
+ /*
+ * signal name from schematics: TFLASH_VDD_EN
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "TFLASH_VDD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ tf_io: gpio-regulator-tf_io {
+ compatible = "regulator-gpio";
+
+ regulator-name = "TF_IO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ /*
+ * signal name from schematics: TF_3V3N_1V8_EN
+ */
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+
+ states = <3300000 0
+ 1800000 1>;
+ };
+
+ vcc1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&scpi_clocks {
+ status = "disabled";
};
&uart_AO {
ðmac {
status = "okay";
- pinctrl-0 = <ð_pins>;
+ pinctrl-0 = <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ phy-handle = <ð_phy0>;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ reg = <0>;
+ eee-broken-1000t;
+ };
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
+
+&i2c_A {
+ status = "okay";
+ pinctrl-0 = <&i2c_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb0_phy {
+ status = "okay";
+ phy-supply = <&usb_otg_pwr>;
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+/* SD */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&tflash_vdd>;
+ vqmmc-supply = <&tf_io>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc3v3>;
+ vqmmc-supply = <&vcc1v8>;
+};
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "meson-gx.dtsi"
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
/ {
compatible = "amlogic,meson-gxbb";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
- cpus {
- #address-cells = <0x2>;
- #size-cells = <0x0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
- reg = <0x0 0x0>;
- enable-method = "psci";
+ soc {
+ usb0_phy: phy@c0000000 {
+ compatible = "amlogic,meson-gxbb-usb2-phy";
+ #phy-cells = <0>;
+ reg = <0x0 0xc0000000 0x0 0x20>;
+ resets = <&reset RESET_USB_OTG>;
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+ clock-names = "usb_general", "usb";
+ status = "disabled";
};
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
- reg = <0x0 0x1>;
- enable-method = "psci";
+ usb1_phy: phy@c0000020 {
+ compatible = "amlogic,meson-gxbb-usb2-phy";
+ #phy-cells = <0>;
+ reg = <0x0 0xc0000020 0x0 0x20>;
+ resets = <&reset RESET_USB_OTG>;
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+ clock-names = "usb_general", "usb";
+ status = "disabled";
};
- cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
- reg = <0x0 0x2>;
- enable-method = "psci";
+ usb0: usb@c9000000 {
+ compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+ reg = <0x0 0xc9000000 0x0 0x40000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+ clock-names = "otg";
+ phys = <&usb0_phy>;
+ phy-names = "usb2-phy";
+ dr_mode = "host";
+ status = "disabled";
};
- cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
- reg = <0x0 0x3>;
- enable-method = "psci";
+ usb1: usb@c9100000 {
+ compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+ reg = <0x0 0xc9100000 0x0 0x40000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+ clock-names = "otg";
+ phys = <&usb1_phy>;
+ phy-names = "usb2-phy";
+ dr_mode = "host";
+ status = "disabled";
};
};
+};
- arm-pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+&cbus {
+ spifc: spi@8c80 {
+ compatible = "amlogic,meson-gxbb-spifc";
+ reg = <0x0 0x08c80 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_SPI>;
+ status = "disabled";
};
+};
+
+ðmac {
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+};
+
+&aobus {
+ pinctrl_aobus: pinctrl@14 {
+ compatible = "amlogic,meson-gxbb-aobus-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio_ao: bank@14 {
+ reg = <0x0 0x00014 0x0 0x8>,
+ <0x0 0x0002c 0x0 0x4>,
+ <0x0 0x00024 0x0 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ uart_ao_a_pins: uart_ao_a {
+ mux {
+ groups = "uart_tx_ao_a", "uart_rx_ao_a";
+ function = "uart_ao";
+ };
+ };
+
+ uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+ mux {
+ groups = "uart_cts_ao_a",
+ "uart_rts_ao_a";
+ function = "uart_ao";
+ };
+ };
+
+ uart_ao_b_pins: uart_ao_b {
+ mux {
+ groups = "uart_tx_ao_b", "uart_rx_ao_b";
+ function = "uart_ao_b";
+ };
+ };
+
+ uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+ mux {
+ groups = "uart_cts_ao_b",
+ "uart_rts_ao_b";
+ function = "uart_ao_b";
+ };
+ };
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
+ remote_input_ao_pins: remote_input_ao {
+ mux {
+ groups = "remote_input_ao";
+ function = "remote_input_ao";
+ };
+ };
+
+ i2c_ao_pins: i2c_ao {
+ mux {
+ groups = "i2c_sck_ao",
+ "i2c_sda_ao";
+ function = "i2c_ao";
+ };
+ };
+
+ pwm_ao_a_3_pins: pwm_ao_a_3 {
+ mux {
+ groups = "pwm_ao_a_3";
+ function = "pwm_ao_a_3";
+ };
+ };
+
+ pwm_ao_a_6_pins: pwm_ao_a_6 {
+ mux {
+ groups = "pwm_ao_a_6";
+ function = "pwm_ao_a_6";
+ };
+ };
+
+ pwm_ao_a_12_pins: pwm_ao_a_12 {
+ mux {
+ groups = "pwm_ao_a_12";
+ function = "pwm_ao_a_12";
+ };
+ };
+
+ pwm_ao_b_pins: pwm_ao_b {
+ mux {
+ groups = "pwm_ao_b";
+ function = "pwm_ao_b";
+ };
+ };
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
+ clkc_AO: clock-controller@040 {
+ compatible = "amlogic,gxbb-aoclkc";
+ reg = <0x0 0x00040 0x0 0x4>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
};
- xtal: xtal-clk {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xtal";
- #clock-cells = <0>;
+ pwm_ab_AO: pwm@550 {
+ compatible = "amlogic,meson-gxbb-pwm";
+ reg = <0x0 0x0550 0x0 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
};
- soc {
- compatible = "simple-bus";
+ i2c_AO: i2c@500 {
+ compatible = "amlogic,meson-gxbb-i2c";
+ reg = <0x0 0x500 0x0 0x20>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_AO_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};
+
+&periphs {
+ pinctrl_periphs: pinctrl@4b0 {
+ compatible = "amlogic,meson-gxbb-periphs-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
- cbus: cbus@c1100000 {
- compatible = "simple-bus";
- reg = <0x0 0xc1100000 0x0 0x100000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
-
- reset: reset-controller@4404 {
- compatible = "amlogic,meson-gxbb-reset";
- reg = <0x0 0x04404 0x0 0x20>;
- #reset-cells = <1>;
- };
-
- uart_A: serial@84c0 {
- compatible = "amlogic,meson-uart";
- reg = <0x0 0x84c0 0x0 0x14>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>;
- status = "disabled";
- };
-
- uart_B: serial@84dc {
- compatible = "amlogic,meson-uart";
- reg = <0x0 0x84dc 0x0 0x14>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>;
- status = "disabled";
- };
-
- uart_C: serial@8700 {
- compatible = "amlogic,meson-uart";
- reg = <0x0 0x8700 0x0 0x14>;
- interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>;
- status = "disabled";
- };
- };
-
- gic: interrupt-controller@c4301000 {
- compatible = "arm,gic-400";
- reg = <0x0 0xc4301000 0 0x1000>,
- <0x0 0xc4302000 0 0x2000>,
- <0x0 0xc4304000 0 0x2000>,
- <0x0 0xc4306000 0 0x2000>;
- interrupt-controller;
- interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
- #interrupt-cells = <3>;
- #address-cells = <0>;
- };
-
- aobus: aobus@c8100000 {
- compatible = "simple-bus";
- reg = <0x0 0xc8100000 0x0 0x100000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
-
- pinctrl_aobus: pinctrl@14 {
- compatible = "amlogic,meson-gxbb-aobus-pinctrl";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio_ao: bank@14 {
- reg = <0x0 0x00014 0x0 0x8>,
- <0x0 0x0002c 0x0 0x4>,
- <0x0 0x00024 0x0 0x8>;
- reg-names = "mux", "pull", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- uart_ao_a_pins: uart_ao_a {
- mux {
- groups = "uart_tx_ao_a", "uart_rx_ao_a";
- function = "uart_ao";
- };
- };
- };
-
- uart_AO: serial@4c0 {
- compatible = "amlogic,meson-uart";
- reg = <0x0 0x004c0 0x0 0x14>;
- interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>;
- status = "disabled";
- };
- };
-
- periphs: periphs@c8834000 {
- compatible = "simple-bus";
- reg = <0x0 0xc8834000 0x0 0x2000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
-
- rng {
- compatible = "amlogic,meson-rng";
- reg = <0x0 0x0 0x0 0x4>;
- };
-
- pinctrl_periphs: pinctrl@4b0 {
- compatible = "amlogic,meson-gxbb-periphs-pinctrl";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio: bank@4b0 {
- reg = <0x0 0x004b0 0x0 0x28>,
- <0x0 0x004e8 0x0 0x14>,
- <0x0 0x00120 0x0 0x14>,
- <0x0 0x00430 0x0 0x40>;
- reg-names = "mux", "pull", "pull-enable", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- emmc_pins: emmc {
- mux {
- groups = "emmc_nand_d07",
- "emmc_cmd",
- "emmc_clk";
- function = "emmc";
- };
- };
-
- sdcard_pins: sdcard {
- mux {
- groups = "sdcard_d0",
- "sdcard_d1",
- "sdcard_d2",
- "sdcard_d3",
- "sdcard_cmd",
- "sdcard_clk";
- function = "sdcard";
- };
- };
-
- uart_a_pins: uart_a {
- mux {
- groups = "uart_tx_a",
- "uart_rx_a";
- function = "uart_a";
- };
- };
-
- uart_b_pins: uart_b {
- mux {
- groups = "uart_tx_b",
- "uart_rx_b";
- function = "uart_b";
- };
- };
-
- uart_c_pins: uart_c {
- mux {
- groups = "uart_tx_c",
- "uart_rx_c";
- function = "uart_c";
- };
- };
-
- eth_pins: eth_c {
- mux {
- groups = "eth_mdio",
- "eth_mdc",
- "eth_clk_rx_clk",
- "eth_rx_dv",
- "eth_rxd0",
- "eth_rxd1",
- "eth_rxd2",
- "eth_rxd3",
- "eth_rgmii_tx_clk",
- "eth_tx_en",
- "eth_txd0",
- "eth_txd1",
- "eth_txd2",
- "eth_txd3";
- function = "eth";
- };
- };
- };
- };
-
- hiubus: hiubus@c883c000 {
- compatible = "simple-bus";
- reg = <0x0 0xc883c000 0x0 0x2000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
-
- clkc: clock-controller@0 {
- compatible = "amlogic,gxbb-clkc";
- #clock-cells = <1>;
- reg = <0x0 0x0 0x0 0x3db>;
- };
- };
-
- apb: apb@d0000000 {
- compatible = "simple-bus";
- reg = <0x0 0xd0000000 0x0 0x200000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
- };
-
- ethmac: ethernet@c9410000 {
- compatible = "amlogic,meson6-dwmac", "snps,dwmac";
- reg = <0x0 0xc9410000 0x0 0x10000
- 0x0 0xc8834540 0x0 0x4>;
- interrupts = <0 8 1>;
- interrupt-names = "macirq";
- clocks = <&xtal>;
- clock-names = "stmmaceth";
- phy-mode = "rgmii";
- status = "disabled";
+ gpio: bank@4b0 {
+ reg = <0x0 0x004b0 0x0 0x28>,
+ <0x0 0x004e8 0x0 0x14>,
+ <0x0 0x00120 0x0 0x14>,
+ <0x0 0x00430 0x0 0x40>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ emmc_pins: emmc {
+ mux {
+ groups = "emmc_nand_d07",
+ "emmc_cmd",
+ "emmc_clk",
+ "emmc_ds";
+ function = "emmc";
+ };
+ };
+
+ nor_pins: nor {
+ mux {
+ groups = "nor_d",
+ "nor_q",
+ "nor_c",
+ "nor_cs";
+ function = "nor";
+ };
+ };
+
+ sdcard_pins: sdcard {
+ mux {
+ groups = "sdcard_d0",
+ "sdcard_d1",
+ "sdcard_d2",
+ "sdcard_d3",
+ "sdcard_cmd",
+ "sdcard_clk";
+ function = "sdcard";
+ };
+ };
+
+ sdio_pins: sdio {
+ mux {
+ groups = "sdio_d0",
+ "sdio_d1",
+ "sdio_d2",
+ "sdio_d3",
+ "sdio_cmd",
+ "sdio_clk";
+ function = "sdio";
+ };
+ };
+
+ sdio_irq_pins: sdio_irq {
+ mux {
+ groups = "sdio_irq";
+ function = "sdio";
+ };
+ };
+
+ uart_a_pins: uart_a {
+ mux {
+ groups = "uart_tx_a",
+ "uart_rx_a";
+ function = "uart_a";
+ };
+ };
+
+ uart_a_cts_rts_pins: uart_a_cts_rts {
+ mux {
+ groups = "uart_cts_a",
+ "uart_rts_a";
+ function = "uart_a";
+ };
+ };
+
+ uart_b_pins: uart_b {
+ mux {
+ groups = "uart_tx_b",
+ "uart_rx_b";
+ function = "uart_b";
+ };
+ };
+
+ uart_b_cts_rts_pins: uart_b_cts_rts {
+ mux {
+ groups = "uart_cts_b",
+ "uart_rts_b";
+ function = "uart_b";
+ };
+ };
+
+ uart_c_pins: uart_c {
+ mux {
+ groups = "uart_tx_c",
+ "uart_rx_c";
+ function = "uart_c";
+ };
+ };
+
+ uart_c_cts_rts_pins: uart_c_cts_rts {
+ mux {
+ groups = "uart_cts_c",
+ "uart_rts_c";
+ function = "uart_c";
+ };
+ };
+
+ i2c_a_pins: i2c_a {
+ mux {
+ groups = "i2c_sck_a",
+ "i2c_sda_a";
+ function = "i2c_a";
+ };
+ };
+
+ i2c_b_pins: i2c_b {
+ mux {
+ groups = "i2c_sck_b",
+ "i2c_sda_b";
+ function = "i2c_b";
+ };
+ };
+
+ i2c_c_pins: i2c_c {
+ mux {
+ groups = "i2c_sck_c",
+ "i2c_sda_c";
+ function = "i2c_c";
+ };
+ };
+
+ eth_rgmii_pins: eth-rgmii {
+ mux {
+ groups = "eth_mdio",
+ "eth_mdc",
+ "eth_clk_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd0",
+ "eth_rxd1",
+ "eth_rxd2",
+ "eth_rxd3",
+ "eth_rgmii_tx_clk",
+ "eth_tx_en",
+ "eth_txd0",
+ "eth_txd1",
+ "eth_txd2",
+ "eth_txd3";
+ function = "eth";
+ };
+ };
+
+ eth_rmii_pins: eth-rmii {
+ mux {
+ groups = "eth_mdio",
+ "eth_mdc",
+ "eth_clk_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd0",
+ "eth_rxd1",
+ "eth_tx_en",
+ "eth_txd0",
+ "eth_txd1";
+ function = "eth";
+ };
+ };
+
+ pwm_a_x_pins: pwm_a_x {
+ mux {
+ groups = "pwm_a_x";
+ function = "pwm_a_x";
+ };
+ };
+
+ pwm_a_y_pins: pwm_a_y {
+ mux {
+ groups = "pwm_a_y";
+ function = "pwm_a_y";
+ };
+ };
+
+ pwm_b_pins: pwm_b {
+ mux {
+ groups = "pwm_b";
+ function = "pwm_b";
+ };
+ };
+
+ pwm_d_pins: pwm_d {
+ mux {
+ groups = "pwm_d";
+ function = "pwm_d";
+ };
+ };
+
+ pwm_e_pins: pwm_e {
+ mux {
+ groups = "pwm_e";
+ function = "pwm_e";
+ };
+ };
+
+ pwm_f_x_pins: pwm_f_x {
+ mux {
+ groups = "pwm_f_x";
+ function = "pwm_f_x";
+ };
+ };
+
+ pwm_f_y_pins: pwm_f_y {
+ mux {
+ groups = "pwm_f_y";
+ function = "pwm_f_y";
+ };
+ };
+
+ hdmi_hpd_pins: hdmi_hpd {
+ mux {
+ groups = "hdmi_hpd";
+ function = "hdmi_hpd";
+ };
+ };
+
+ hdmi_i2c_pins: hdmi_i2c {
+ mux {
+ groups = "hdmi_sda", "hdmi_scl";
+ function = "hdmi_i2c";
+ };
};
};
};
+
+&hiubus {
+ clkc: clock-controller@0 {
+ compatible = "amlogic,gxbb-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x3db>;
+ };
+};
+
+&i2c_A {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&sd_emmc_a {
+ clocks = <&clkc CLKID_SD_EMMC_A>,
+ <&xtal>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_b {
+ clocks = <&clkc CLKID_SD_EMMC_B>,
+ <&xtal>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_c {
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&xtal>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+};
+
+&vpu {
+ compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+};
--- /dev/null
+/*
+ * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
+ * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+ model = "Atmel SAMA5D3 family SoC";
+ compatible = "atmel,sama5d3", "atmel,sama5";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ serial5 = &uart0;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ gpio4 = &pioE;
+ tcb0 = &tcb0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ ssc0 = &ssc0;
+ ssc1 = &ssc1;
+ pwm0 = &pwm0;
+ };
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0x0>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a5-pmu";
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ memory {
+ reg = <0x20000000 0x8000000>;
+ };
+
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ };
+ };
+
+ sram: sram@00300000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x20000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ u-boot,dm-pre-reloc;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ u-boot,dm-pre-reloc;
+
+ mmc0: mmc@f0000000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf0000000 0x600>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
+ dma-names = "rxtx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
+ };
+
+ spi0: spi@f0004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf0004000 0x100>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
+ <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
+ status = "disabled";
+ };
+
+ ssc0: ssc@f0008000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf0008000 0x4000>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
+ <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
+ tcb0: timer@f0010000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xf0010000 0x100>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb0_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+ };
+
+ i2c0: i2c@f0014000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf0014000 0x4000>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
+ <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi0_clk>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@f0018000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf0018000 0x4000>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
+ <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi1_clk>;
+ status = "disabled";
+ };
+
+ usart0: serial@f001c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf001c000 0x100>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+ <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart1: serial@f0020000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf0020000 0x100>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
+ <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ uart0: serial@f0024000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf0024000 0x100>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart0_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ pwm0: pwm@f002c000 {
+ compatible = "atmel,sama5d3-pwm";
+ reg = <0xf002c000 0x300>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
+ #pwm-cells = <3>;
+ clocks = <&pwm_clk>;
+ status = "disabled";
+ };
+
+ isi: isi@f0034000 {
+ compatible = "atmel,at91sam9g45-isi";
+ reg = <0xf0034000 0x4000>;
+ interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isi_data_0_7>;
+ clocks = <&isi_clk>;
+ clock-names = "isi_clk";
+ status = "disabled";
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ sfr: sfr@f0038000 {
+ compatible = "atmel,sama5d3-sfr", "syscon";
+ reg = <0xf0038000 0x60>;
+ };
+
+ mmc1: mmc@f8000000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf8000000 0x600>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
+ dma-names = "rxtx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mci1_clk>;
+ clock-names = "mci_clk";
+ };
+
+ spi1: spi@f8008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf8008000 0x100>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
+ <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
+ status = "disabled";
+ };
+
+ ssc1: ssc@f800c000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf800c000 0x4000>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
+ <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
+ adc0: adc@f8018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9x5-adc";
+ reg = <0xf8018000 0x100>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_adc0_adtrg
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ &pinctrl_adc0_ad5
+ &pinctrl_adc0_ad6
+ &pinctrl_adc0_ad7
+ &pinctrl_adc0_ad8
+ &pinctrl_adc0_ad9
+ &pinctrl_adc0_ad10
+ &pinctrl_adc0_ad11
+ >;
+ clocks = <&adc_clk>,
+ <&adc_op_clk>;
+ clock-names = "adc_clk", "adc_op_clk";
+ atmel,adc-channels-used = <0xfff>;
+ atmel,adc-startup-time = <40>;
+ atmel,adc-use-external-triggers;
+ atmel,adc-vref = <3000>;
+ atmel,adc-res = <10 12>;
+ atmel,adc-sample-hold-time = <11>;
+ atmel,adc-res-names = "lowres", "highres";
+ status = "disabled";
+
+ trigger@0 {
+ reg = <0>;
+ trigger-name = "external-rising";
+ trigger-value = <0x1>;
+ trigger-external;
+ };
+ trigger@1 {
+ reg = <1>;
+ trigger-name = "external-falling";
+ trigger-value = <0x2>;
+ trigger-external;
+ };
+ trigger@2 {
+ reg = <2>;
+ trigger-name = "external-any";
+ trigger-value = <0x3>;
+ trigger-external;
+ };
+ trigger@3 {
+ reg = <3>;
+ trigger-name = "continuous";
+ trigger-value = <0x6>;
+ };
+ };
+
+ i2c2: i2c@f801c000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf801c000 0x4000>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
+ <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi2_clk>;
+ status = "disabled";
+ };
+
+ usart2: serial@f8020000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8020000 0x100>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
+ <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart3: serial@f8024000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8024000 0x100>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
+ <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ sha@f8034000 {
+ compatible = "atmel,at91sam9g46-sha";
+ reg = <0xf8034000 0x100>;
+ interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
+ dma-names = "tx";
+ clocks = <&sha_clk>;
+ clock-names = "sha_clk";
+ };
+
+ aes@f8038000 {
+ compatible = "atmel,at91sam9g46-aes";
+ reg = <0xf8038000 0x100>;
+ interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
+ <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
+ dma-names = "tx", "rx";
+ clocks = <&aes_clk>;
+ clock-names = "aes_clk";
+ };
+
+ tdes@f803c000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xf803c000 0x100>;
+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
+ <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
+ dma-names = "tx", "rx";
+ clocks = <&tdes_clk>;
+ clock-names = "tdes_clk";
+ };
+
+ trng@f8040000 {
+ compatible = "atmel,at91sam9g45-trng";
+ reg = <0xf8040000 0x100>;
+ interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&trng_clk>;
+ };
+
+ dma0: dma-controller@ffffe600 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffe600 0x200>;
+ interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <2>;
+ clocks = <&dma0_clk>;
+ clock-names = "dma_clk";
+ };
+
+ dma1: dma-controller@ffffe800 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffe800 0x200>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <2>;
+ clocks = <&dma1_clk>;
+ clock-names = "dma_clk";
+ };
+
+ ramc0: ramc@ffffea00 {
+ compatible = "atmel,sama5d3-ddramc";
+ reg = <0xffffea00 0x200>;
+ clocks = <&ddrck>, <&mpddr_clk>;
+ clock-names = "ddrck", "mpddr";
+ };
+
+ dbgu: serial@ffffee00 {
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ reg = <0xffffee00 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
+ <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&dbgu_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <3>;
+ compatible = "atmel,sama5d3-aic";
+ interrupt-controller;
+ reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <47>;
+ };
+
+ pinctrl@fffff200 {
+ u-boot,dm-pre-reloc;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+ ranges = <0xfffff200 0xfffff200 0xa00>;
+ atmel,mux-mask = <
+ /* A B C */
+ 0xffffffff 0xc0fc0000 0xc0ff0000 /* pioA */
+ 0xffffffff 0x0ff8ffff 0x00000000 /* pioB */
+ 0xffffffff 0xbc00f1ff 0x7c00fc00 /* pioC */
+ 0xffffffff 0xc001c0e0 0x0001c1e0 /* pioD */
+ 0xffffffff 0xbf9f8000 0x18000000 /* pioE */
+ >;
+ reg = <0xfffff200 0x100 /* pioA */
+ 0xfffff400 0x100 /* pioB */
+ 0xfffff600 0x100 /* pioC */
+ 0xfffff800 0x100 /* pioD */
+ 0xfffffa00 0x100 /* pioE */
+ >;
+
+ /* shared pinctrl settings */
+ adc0 {
+ pinctrl_adc0_adtrg: adc0_adtrg {
+ atmel,pins =
+ <AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD19 periph A ADTRG */
+ };
+ pinctrl_adc0_ad0: adc0_ad0 {
+ atmel,pins =
+ <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD20 periph A AD0 */
+ };
+ pinctrl_adc0_ad1: adc0_ad1 {
+ atmel,pins =
+ <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A AD1 */
+ };
+ pinctrl_adc0_ad2: adc0_ad2 {
+ atmel,pins =
+ <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD22 periph A AD2 */
+ };
+ pinctrl_adc0_ad3: adc0_ad3 {
+ atmel,pins =
+ <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD23 periph A AD3 */
+ };
+ pinctrl_adc0_ad4: adc0_ad4 {
+ atmel,pins =
+ <AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD24 periph A AD4 */
+ };
+ pinctrl_adc0_ad5: adc0_ad5 {
+ atmel,pins =
+ <AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD25 periph A AD5 */
+ };
+ pinctrl_adc0_ad6: adc0_ad6 {
+ atmel,pins =
+ <AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD26 periph A AD6 */
+ };
+ pinctrl_adc0_ad7: adc0_ad7 {
+ atmel,pins =
+ <AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD27 periph A AD7 */
+ };
+ pinctrl_adc0_ad8: adc0_ad8 {
+ atmel,pins =
+ <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD28 periph A AD8 */
+ };
+ pinctrl_adc0_ad9: adc0_ad9 {
+ atmel,pins =
+ <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD29 periph A AD9 */
+ };
+ pinctrl_adc0_ad10: adc0_ad10 {
+ atmel,pins =
+ <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD30 periph A AD10, conflicts with PCK0 */
+ };
+ pinctrl_adc0_ad11: adc0_ad11 {
+ atmel,pins =
+ <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD31 periph A AD11, conflicts with PCK1 */
+ };
+ };
+
+ dbgu {
+ u-boot,dm-pre-reloc;
+ pinctrl_dbgu: dbgu-0 {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB30 periph A */
+ AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB31 periph A with pullup */
+ };
+ };
+
+ i2c0 {
+ pinctrl_i2c0: i2c0-0 {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
+ AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1: i2c1-0 {
+ atmel,pins =
+ <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
+ AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2: i2c2-0 {
+ atmel,pins =
+ <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
+ AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
+ };
+ };
+
+ isi {
+ pinctrl_isi_data_0_7: isi-0-data-0-7 {
+ atmel,pins =
+ <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
+ AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
+ AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
+ AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
+ AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
+ AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
+ AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
+ AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
+ AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC30 periph C ISI_PCK, conflicts with UTXD0 */
+ AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
+ AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+ };
+
+ pinctrl_isi_data_8_9: isi-0-data-8-9 {
+ atmel,pins =
+ <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+ AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
+ };
+
+ pinctrl_isi_data_10_11: isi-0-data-10-11 {
+ atmel,pins =
+ <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
+ AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
+ };
+ };
+
+ mmc0 {
+ u-boot,dm-pre-reloc;
+ pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A MCI0_CK */
+ AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A MCI0_CDA with pullup */
+ AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD1 periph A MCI0_DA0 with pullup */
+ };
+ pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A MCI0_DA1 with pullup */
+ AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A MCI0_DA2 with pullup */
+ AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD4 periph A MCI0_DA3 with pullup */
+ };
+ pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
+ AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
+ AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
+ AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
+ };
+ };
+
+ mmc1 {
+ u-boot,dm-pre-reloc;
+ pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A MCI1_CK, conflicts with GRX5 */
+ AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
+ AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
+ };
+ pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
+ AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
+ AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
+ };
+ };
+
+ nand0 {
+ pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
+ atmel,pins =
+ <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PE21 periph A with pullup */
+ AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PE22 periph A with pullup */
+ };
+ };
+
+ pwm0 {
+ pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
+ atmel,pins =
+ <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D4 and LCDDAT20 */
+ };
+ pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX0 */
+ };
+ pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
+ atmel,pins =
+ <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D5 and LCDDAT21 */
+ };
+ pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
+ atmel,pins =
+ <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX1 */
+ };
+
+ pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
+ atmel,pins =
+ <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D6 and LCDDAT22 */
+ };
+ pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
+ atmel,pins =
+ <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX0 */
+ };
+ pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
+ atmel,pins =
+ <AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with G125CKO and RTS1 */
+ };
+ pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
+ atmel,pins =
+ <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D7 and LCDDAT23 */
+ };
+ pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
+ atmel,pins =
+ <AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX1 */
+ };
+ pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
+ atmel,pins =
+ <AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with IRQ */
+ };
+
+ pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
+ atmel,pins =
+ <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXCK */
+ };
+ pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
+ atmel,pins =
+ <AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA4 and TIOA0 */
+ };
+ pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
+ atmel,pins =
+ <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXEN */
+ };
+ pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
+ atmel,pins =
+ <AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA5 and TIOB0 */
+ };
+
+ pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
+ atmel,pins =
+ <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXDV */
+ };
+ pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
+ atmel,pins =
+ <AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA6 and TCLK0 */
+ };
+ pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
+ atmel,pins =
+ <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXER */
+ };
+ pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
+ atmel,pins =
+ <AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA7 */
+ };
+ };
+
+ spi0 {
+ u-boot,dm-pre-reloc;
+ pinctrl_spi0: spi0-0 {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A SPI0_MISO pin */
+ AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A SPI0_MOSI pin */
+ AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ u-boot,dm-pre-reloc;
+ pinctrl_spi1: spi1-0 {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A SPI1_MISO pin */
+ AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A SPI1_MOSI pin */
+ AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC24 periph A SPI1_SPCK pin */
+ };
+ };
+
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx {
+ atmel,pins =
+ <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A TK0 */
+ AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC17 periph A TF0 */
+ AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC18 periph A TD0 */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx {
+ atmel,pins =
+ <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A RK0 */
+ AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC20 periph A RF0 */
+ AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC21 periph A RD0 */
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx {
+ atmel,pins =
+ <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB2 periph B TK1, conflicts with GTX2 */
+ AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B TF1, conflicts with GTX3 */
+ AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB6 periph B TD1, conflicts with TD1 */
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx {
+ atmel,pins =
+ <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB7 periph B RK1, conflicts with EREFCK */
+ AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB10 periph B RF1, conflicts with GTXER */
+ AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB11 periph B RD1, conflicts with GRXCK */
+ };
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* conflicts with PWMFI2, ISI_D8 */
+ AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with ISI_PCK */
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* conflicts with TWD0, ISI_VSYNC */
+ AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* conflicts with TWCK0, ISI_HSYNC */
+ };
+ };
+
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A */
+ AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD18 periph A with pullup */
+ };
+
+ pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
+ atmel,pins =
+ <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
+ AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB28 periph A */
+ AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB29 periph A with pullup */
+ };
+
+ pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
+ atmel,pins =
+ <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB26 periph A, conflicts with GRX7 */
+ AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A, conflicts with G125CKO */
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE25 periph B, conflicts with A25 */
+ AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE26 periph B with pullup, conflicts NCS0 */
+ };
+
+ pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
+ atmel,pins =
+ <AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE23 periph B, conflicts with A23 */
+ AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE24 periph B, conflicts with A24 */
+ };
+ };
+
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE18 periph B, conflicts with A18 */
+ AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE19 periph B with pullup, conflicts with A19 */
+ };
+
+ pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
+ atmel,pins =
+ <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE16 periph B, conflicts with A16 */
+ AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE17 periph B, conflicts with A17 */
+ };
+ };
+ };
+
+ pioA: gpio@fffff200 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff200 0x100>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
+ u-boot,dm-pre-reloc;
+ };
+
+ pioB: gpio@fffff400 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x100>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
+ u-boot,dm-pre-reloc;
+ };
+
+ pioC: gpio@fffff600 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x100>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
+ u-boot,dm-pre-reloc;
+ };
+
+ pioD: gpio@fffff800 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x100>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioD_clk>;
+ u-boot,dm-pre-reloc;
+ };
+
+ pioE: gpio@fffffa00 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x100>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioE_clk>;
+ u-boot,dm-pre-reloc;
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,sama5d3-pmc", "syscon";
+ reg = <0xfffffc00 0x120>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ main_rc_osc: main_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCRCS>;
+ clock-frequency = <12000000>;
+ clock-accuracy = <50000000>;
+ };
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91sam9x5-clk-main";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCSELS>;
+ clocks = <&main_rc_osc &main_osc>;
+ };
+
+ plla: pllack@0 {
+ compatible = "atmel,sama5d3-clk-pll";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <8000000 50000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>;
+ };
+
+ plladiv: plladivck {
+ compatible = "atmel,at91sam9x5-clk-plldiv";
+ #clock-cells = <0>;
+ clocks = <&plla>;
+ };
+
+ utmi: utmick {
+ compatible = "atmel,at91sam9x5-clk-utmi";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_LOCKU>;
+ clocks = <&main>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91sam9x5-clk-master";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MCKRDY>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+ atmel,clk-output-range = <0 166000000>;
+ atmel,clk-divisors = <1 2 4 3>;
+ u-boot,dm-pre-reloc;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91sam9x5-clk-usb";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91sam9x5-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ prog0: progck@0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: progck@1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+
+ prog2: progck@2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ interrupts = <AT91_PMC_PCKRDY(2)>;
+ };
+ };
+
+ smd: smdclk {
+ compatible = "atmel,at91sam9x5-clk-smd";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ddrck: ddrck@2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ clocks = <&mck>;
+ };
+
+ smdck: smdck@4 {
+ #clock-cells = <0>;
+ reg = <4>;
+ clocks = <&smd>;
+ };
+
+ uhpck: uhpck@6 {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck: udpck@7 {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck@8 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck@9 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ pck2: pck@10 {
+ #clock-cells = <0>;
+ reg = <10>;
+ clocks = <&prog2>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91sam9x5-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+ u-boot,dm-pre-reloc;
+
+ dbgu_clk: dbgu_clk@2 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ hsmc_clk: hsmc_clk@5 {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ pioA_clk: pioA_clk@6 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ pioB_clk: pioB_clk@7 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ pioC_clk: pioC_clk@8 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ pioD_clk: pioD_clk@9 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ pioE_clk: pioE_clk@10 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ usart0_clk: usart0_clk@12 {
+ #clock-cells = <0>;
+ reg = <12>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ usart1_clk: usart1_clk@13 {
+ #clock-cells = <0>;
+ reg = <13>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ usart2_clk: usart2_clk@14 {
+ #clock-cells = <0>;
+ reg = <14>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ usart3_clk: usart3_clk@15 {
+ #clock-cells = <0>;
+ reg = <15>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ uart0_clk: uart0_clk@16 {
+ #clock-cells = <0>;
+ reg = <16>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ twi0_clk: twi0_clk@18 {
+ reg = <18>;
+ #clock-cells = <0>;
+ atmel,clk-output-range = <0 16625000>;
+ };
+
+ twi1_clk: twi1_clk@19 {
+ #clock-cells = <0>;
+ reg = <19>;
+ atmel,clk-output-range = <0 16625000>;
+ };
+
+ twi2_clk: twi2_clk@20 {
+ #clock-cells = <0>;
+ reg = <20>;
+ atmel,clk-output-range = <0 16625000>;
+ };
+
+ mci0_clk: mci0_clk@21 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ mci1_clk: mci1_clk@22 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ spi0_clk: spi0_clk@24 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <24>;
+ atmel,clk-output-range = <0 133000000>;
+ };
+
+ spi1_clk: spi1_clk@25 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <25>;
+ atmel,clk-output-range = <0 133000000>;
+ };
+
+ tcb0_clk: tcb0_clk@26 {
+ #clock-cells = <0>;
+ reg = <26>;
+ atmel,clk-output-range = <0 133000000>;
+ };
+
+ pwm_clk: pwm_clk@28 {
+ #clock-cells = <0>;
+ reg = <28>;
+ };
+
+ adc_clk: adc_clk@29 {
+ #clock-cells = <0>;
+ reg = <29>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ dma0_clk: dma0_clk@30 {
+ #clock-cells = <0>;
+ reg = <30>;
+ };
+
+ dma1_clk: dma1_clk@31 {
+ #clock-cells = <0>;
+ reg = <31>;
+ };
+
+ uhphs_clk: uhphs_clk@32 {
+ #clock-cells = <0>;
+ reg = <32>;
+ };
+
+ udphs_clk: udphs_clk@33 {
+ #clock-cells = <0>;
+ reg = <33>;
+ };
+
+ isi_clk: isi_clk@37 {
+ #clock-cells = <0>;
+ reg = <37>;
+ };
+
+ ssc0_clk: ssc0_clk@38 {
+ #clock-cells = <0>;
+ reg = <38>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ ssc1_clk: ssc1_clk@39 {
+ #clock-cells = <0>;
+ reg = <39>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ sha_clk: sha_clk@42 {
+ #clock-cells = <0>;
+ reg = <42>;
+ };
+
+ aes_clk: aes_clk@43 {
+ #clock-cells = <0>;
+ reg = <43>;
+ };
+
+ tdes_clk: tdes_clk@44 {
+ #clock-cells = <0>;
+ reg = <44>;
+ };
+
+ trng_clk: trng_clk@45 {
+ #clock-cells = <0>;
+ reg = <45>;
+ };
+
+ fuse_clk: fuse_clk@48 {
+ #clock-cells = <0>;
+ reg = <48>;
+ };
+
+ mpddr_clk: mpddr_clk@49 {
+ #clock-cells = <0>;
+ reg = <49>;
+ };
+ };
+ };
+
+ rstc@fffffe00 {
+ compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+ reg = <0xfffffe00 0x10>;
+ clocks = <&clk32k>;
+ };
+
+ shutdown-controller@fffffe10 {
+ compatible = "atmel,at91sam9x5-shdwc";
+ reg = <0xfffffe10 0x10>;
+ clocks = <&clk32k>;
+ };
+
+ pit: timer@fffffe30 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffe30 0xf>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&mck>;
+ };
+
+ watchdog@fffffe40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffe40 0x10>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
+ atmel,watchdog-type = "hardware";
+ atmel,reset-type = "all";
+ atmel,dbg-halt;
+ status = "disabled";
+ };
+
+ sckc@fffffe50 {
+ compatible = "atmel,at91sam9x5-sckc";
+ reg = <0xfffffe50 0x4>;
+
+ slow_rc_osc: slow_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ atmel,startup-time-usec = <75>;
+ };
+
+ slow_osc: slow_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-osc";
+ #clock-cells = <0>;
+ clocks = <&slow_xtal>;
+ atmel,startup-time-usec = <1200000>;
+ };
+
+ clk32k: slowck {
+ compatible = "atmel,at91sam9x5-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc &slow_osc>;
+ };
+ };
+
+ rtc@fffffeb0 {
+ compatible = "atmel,at91rm9200-rtc";
+ reg = <0xfffffeb0 0x30>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
+ };
+ };
+
+ usb0: gadget@00500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,sama5d3-udc";
+ reg = <0x00500000 0x100000
+ 0xf8030000 0x4000>;
+ interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udphs_clk>, <&utmi>;
+ clock-names = "pclk", "hclk";
+ status = "disabled";
+
+ ep0: endpoint@0 {
+ reg = <0>;
+ atmel,fifo-size = <64>;
+ atmel,nb-banks = <1>;
+ };
+
+ ep1: endpoint@1 {
+ reg = <1>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep2: endpoint@2 {
+ reg = <2>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep3: endpoint@3 {
+ reg = <3>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep4: endpoint@4 {
+ reg = <4>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep5: endpoint@5 {
+ reg = <5>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep6: endpoint@6 {
+ reg = <6>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep7i: endpoint@7 {
+ reg = <7>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep8: endpoint@8 {
+ reg = <8>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep9: endpoint@9 {
+ reg = <9>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep10: endpoint@10 {
+ reg = <10>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep11: endpoint@11 {
+ reg = <11>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep12: endpoint@12 {
+ reg = <12>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep13: endpoint@13 {
+ reg = <13>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep14: endpoint@14 {
+ reg = <14>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep15: endpoint@15 {
+ reg = <15>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+ };
+
+ usb1: ohci@00600000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00600000 0x100000>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
+ status = "disabled";
+ };
+
+ usb2: ehci@00700000 {
+ compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x00700000 0x100000>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
+ status = "disabled";
+ };
+
+ nand0: nand@60000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = < 0x60000000 0x01000000 /* EBI CS3 */
+ 0xffffc070 0x00000490 /* SMC PMECC regs */
+ 0xffffc500 0x00000100 /* SMC PMECC Error Location regs */
+ 0x00110000 0x00018000 /* ROM code */
+ >;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ atmel,nand-has-dma;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand0_ale_cle>;
+ atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
+ status = "disabled";
+
+ nfc@70000000 {
+ compatible = "atmel,sama5d3-nfc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <
+ 0x70000000 0x08000000 /* NFC Command Registers */
+ 0xffffc000 0x00000070 /* NFC HSMC regs */
+ 0x00200000 0x00100000 /* NFC SRAM banks */
+ >;
+ clocks = <&hsmc_clk>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+ compatible = "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+};
--- /dev/null
+/*
+ * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d31.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+ model = "Atmel SAMA5D31-EK";
+ compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ status = "okay";
+ };
+
+ ssc0: ssc@f0008000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ d3 {
+ label = "d3";
+ gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ status = "okay";
+ };
+};
--- /dev/null
+/*
+ * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+
+/ {
+ compatible = "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+};
--- /dev/null
+/*
+ * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d33.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+ model = "Atmel SAMA5D33-EK";
+ compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ status = "okay";
+ };
+
+ ssc0: ssc@f0008000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f0028000 {
+ status = "okay";
+ };
+ };
+ };
+
+ sound {
+ status = "okay";
+ };
+};
--- /dev/null
+/*
+ * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+
+/ {
+ compatible = "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+};
--- /dev/null
+/*
+ * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d34.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+ model = "Atmel SAMA5D34-EK";
+ compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ status = "okay";
+ };
+
+ ssc0: ssc@f0008000 {
+ status = "okay";
+ };
+
+ can0: can@f000c000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+
+ 24c256@50 {
+ compatible = "24c256";
+ reg = <0x50>;
+ pagesize = <64>;
+ };
+ };
+
+ macb0: ethernet@f0028000 {
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ d3 {
+ label = "d3";
+ gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ status = "okay";
+ };
+};
--- /dev/null
+/*
+ * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+#include "sama5d3_tcb1.dtsi"
+
+/ {
+ compatible = "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+};
--- /dev/null
+/*
+ * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d35.dtsi"
+#include "sama5d3xmb.dtsi"
+
+/ {
+ model = "Atmel SAMA5D35-EK";
+ compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ status = "okay";
+ };
+
+ can0: can@f000c000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f0028000 {
+ status = "okay";
+ };
+
+ isi: isi@f0034000 {
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ pb_user1 {
+ label = "pb_user1";
+ gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x100>;
+ wakeup-source;
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Josh Wu <josh.wu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_tcb1.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+ compatible = "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+};
--- /dev/null
+/*
+ * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Josh Wu <josh.wu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+ model = "Atmel SAMA5D36-EK";
+ compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ status = "okay";
+ };
+
+ ssc0: ssc@f0008000 {
+ status = "okay";
+ };
+
+ can0: can@f000c000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f0028000 {
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ sound {
+ status = "okay";
+ };
+};
--- /dev/null
+/*
+ * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board
+ *
+ * Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb_cmp.dtsi"
+
+/ {
+ model = "Atmel SAMA5D36-EK";
+ compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ status = "okay";
+ };
+
+ ssc0: ssc@f0008000 {
+ status = "okay";
+ };
+
+ can0: can@f000c000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f0028000 {
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ sound {
+ status = "okay";
+ };
+};
--- /dev/null
+/*
+ * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * CAN support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ can0 {
+ pinctrl_can0_rx_tx: can0_rx_tx {
+ atmel,pins =
+ <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+ AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+ };
+ };
+
+ can1 {
+ pinctrl_can1_rx_tx: can1_rx_tx {
+ atmel,pins =
+ <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */
+ AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */
+ };
+ };
+
+ };
+
+ pmc: pmc@fffffc00 {
+ periphck {
+ can0_clk: can0_clk@40 {
+ #clock-cells = <0>;
+ reg = <40>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ can1_clk: can1_clk@41 {
+ #clock-cells = <0>;
+ reg = <41>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+ };
+ };
+
+ can0: can@f000c000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf000c000 0x300>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_rx_tx>;
+ clocks = <&can0_clk>;
+ clock-names = "can_clk";
+ status = "disabled";
+ };
+
+ can1: can@f8010000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf8010000 0x300>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_rx_tx>;
+ clocks = <&can1_clk>;
+ clock-names = "can_clk";
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ macb1 {
+ pinctrl_macb1_rmii: macb1_rmii-0 {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */
+ AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */
+ AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */
+ AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */
+ AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */
+ AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */
+ AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */
+ AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */
+ AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */
+ AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */
+ };
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ periphck {
+ macb1_clk: macb1_clk@35 {
+ #clock-cells = <0>;
+ reg = <35>;
+ };
+ };
+ };
+
+ macb1: ethernet@f802c000 {
+ compatible = "cdns,at91sam9260-macb", "cdns,macb";
+ reg = <0xf802c000 0x100>;
+ interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb1_rmii>;
+ clocks = <&macb1_clk>, <&macb1_clk>;
+ clock-names = "hclk", "pclk";
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Gigabit Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ macb0 {
+ pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */
+ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */
+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */
+ AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */
+ AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */
+ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */
+ AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */
+ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */
+ };
+ pinctrl_macb0_data_gmii: macb0_data_gmii {
+ atmel,pins =
+ <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */
+ AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+ AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+ AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+ AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+ AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */
+ AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */
+ AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */
+ };
+ pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+ atmel,pins =
+ <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */
+ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */
+ AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */
+ AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */
+ AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */
+ AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */
+ AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */
+ };
+ pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+ atmel,pins =
+ <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */
+ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */
+ AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */
+ AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */
+ AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */
+ AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */
+ AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */
+ AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */
+ AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */
+ AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */
+ };
+
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ periphck {
+ macb0_clk: macb0_clk@34 {
+ #clock-cells = <0>;
+ reg = <34>;
+ };
+ };
+ };
+
+ macb0: ethernet@f0028000 {
+ compatible = "atmel,sama5d3-gem";
+ reg = <0xf0028000 0x100>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * LCD support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ hlcdc: hlcdc@f0030000 {
+ compatible = "atmel,sama5d3-hlcdc";
+ reg = <0xf0030000 0x2000>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+ status = "disabled";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
+
+ pinctrl@fffff200 {
+ lcd {
+ pinctrl_lcd_base: lcd-base-0 {
+ atmel,pins =
+ <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */
+ AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */
+ AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */
+ AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */
+ AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */
+ };
+
+ pinctrl_lcd_pwm: lcd-pwm-0 {
+ atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */
+ };
+
+ pinctrl_lcd_rgb444: lcd-rgb-0 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */
+ };
+
+ pinctrl_lcd_rgb565: lcd-rgb-1 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */
+ };
+
+ pinctrl_lcd_rgb666: lcd-rgb-2 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
+ AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
+ AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD17 pin */
+ };
+
+ pinctrl_lcd_rgb666_alt: lcd-rgb-2-alt {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
+ AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD16 pin */
+ AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* LCDD17 pin */
+ };
+
+ pinctrl_lcd_rgb888: lcd-rgb-3 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
+ AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
+ AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
+ AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
+ AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
+ AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
+ AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
+ AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
+ AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
+ };
+
+ pinctrl_lcd_rgb888_alt: lcd-rgb-3-alt {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
+ AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD16 pin */
+ AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD17 pin */
+ AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD18 pin */
+ AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD19 pin */
+ AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD20 pin */
+ AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD21 pin */
+ AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD22 pin */
+ AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* LCDD23 pin */
+ };
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ periphck {
+ lcdc_clk: lcdc_clk@36 {
+ #clock-cells = <0>;
+ reg = <36>;
+ };
+ };
+
+ systemck {
+ lcdck: lcdck@3 {
+ #clock-cells = <0>;
+ reg = <3>;
+ clocks = <&mck>;
+ };
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 3 MMC ports
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ mmc2 {
+ pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+ atmel,pins =
+ <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */
+ AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */
+ AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */
+ };
+ pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+ atmel,pins =
+ <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+ AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+ AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+ };
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ periphck {
+ mci2_clk: mci2_clk@23 {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+ };
+ };
+
+ mmc2: mmc@f8004000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf8004000 0x600>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
+ dma-names = "rxtx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+ clocks = <&mci2_clk>;
+ clock-names = "mci_clk";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 2 TC blocks.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+ aliases {
+ tcb1 = &tcb1;
+ };
+
+ ahb {
+ apb {
+ pmc: pmc@fffffc00 {
+ periphck {
+ tcb1_clk: tcb1_clk@27 {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+ };
+ };
+
+ tcb1: timer@f8014000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xf8014000 0x100>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb1_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * UART support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+ aliases {
+ serial5 = &uart0;
+ serial6 = &uart1;
+ };
+
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
+ AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
+ AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
+ };
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ periphck {
+ uart0_clk: uart0_clk@16 {
+ #clock-cells = <0>;
+ reg = <16>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ uart1_clk: uart1_clk@17 {
+ #clock-cells = <0>;
+ reg = <17>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+ };
+ };
+
+ uart0: serial@f0024000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf0024000 0x200>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart0_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ uart1: serial@f8028000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8028000 0x200>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&uart1_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x20000000 0x20000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+ };
+
+ macb0: ethernet@f0028000 {
+ phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ interrupt-parent = <&pioB>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ txen-skew-ps = <800>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <400>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <400>;
+ rxd1-skew-ps = <400>;
+ rxd2-skew-ps = <400>;
+ rxd3-skew-ps = <400>;
+ };
+
+ ethernet-phy@7 {
+ reg = <0x7>;
+ interrupt-parent = <&pioB>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ txen-skew-ps = <800>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <400>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <400>;
+ rxd1-skew-ps = <400>;
+ rxd2-skew-ps = <400>;
+ rxd3-skew-ps = <400>;
+ };
+ };
+ };
+
+ nand0: nand@60000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ d2 {
+ label = "d2";
+ gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module
+ *
+ * Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x20000000 0x20000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+ };
+
+ macb0: ethernet@f0028000 {
+ phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ interrupt-parent = <&pioB>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ txen-skew-ps = <800>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <400>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <400>;
+ rxd1-skew-ps = <400>;
+ rxd2-skew-ps = <400>;
+ rxd3-skew-ps = <400>;
+ };
+
+ ethernet-phy@7 {
+ reg = <0x7>;
+ interrupt-parent = <&pioB>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ txen-skew-ps = <800>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <400>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <400>;
+ rxd1-skew-ps = <400>;
+ rxd2-skew-ps = <400>;
+ rxd3-skew-ps = <400>;
+ };
+ };
+
+ i2c1: i2c@f0018000 {
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ status = "disabled";
+
+ regulators {
+ vcc_1v8_reg: DCDC_REG1 {
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_1v2_reg: DCDC_REG2 {
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ vcc_3v3_reg: DCDC_REG3 {
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddana_reg: LDO_REG1 {
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddfuse_reg: LDO_REG2 {
+ regulator-name = "FUSE_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ };
+ };
+ };
+ };
+
+ nand0: nand@60000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ d2 {
+ label = "d2";
+ gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d3dm.dtsi - Device Tree file for SAMA5 display module
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ ahb {
+ apb {
+ i2c1: i2c@f0018000 {
+ qt1070: keyboard@1b {
+ compatible = "qt1070";
+ reg = <0x1b>;
+ interrupt-parent = <&pioE>;
+ interrupts = <31 0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qt1070_irq>;
+ wakeup-source;
+ };
+ };
+
+ adc0: adc@f8018000 {
+ atmel,adc-ts-wires = <4>;
+ atmel,adc-ts-pressure-threshold = <10000>;
+ status = "okay";
+ };
+
+ pinctrl@fffff200 {
+ board {
+ pinctrl_qt1070_irq: qt1070_irq {
+ atmel,pins =
+ <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */
+ };
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3xcm.dtsi"
+
+/ {
+ compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ u-boot,dm-pre-reloc;
+ stdout-path = &dbgu;
+ };
+
+ ahb {
+ apb {
+ mmc0: mmc@f0000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ spi0: spi@f0004000 {
+ dmas = <0>, <0>; /* Do not use DMA for spi0 */
+ u-boot,dm-pre-reloc;
+
+ spi_flash@0 {
+ compatible = "spi-flash";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+
+ ssc0: ssc@f0008000 {
+ atmel,clk-from-rk-pin;
+ };
+
+ /*
+ * i2c0 conflicts with ISI:
+ * disable it to allow the use of ISI
+ * can not enable audio when i2c0 disabled
+ */
+ i2c0: i2c@f0014000 {
+ wm8904: wm8904@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ clocks = <&pck0>;
+ clock-names = "mclk";
+ };
+ };
+
+ i2c1: i2c@f0018000 {
+ ov2640: camera@0x30 {
+ compatible = "ovti,ov2640";
+ reg = <0x30>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+ resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+ pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+ /* use pck1 for the master clock of ov2640 */
+ clocks = <&pck1>;
+ clock-names = "xvclk";
+ assigned-clocks = <&pck1>;
+ assigned-clock-rates = <25000000>;
+
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint = <&isi_0>;
+ bus-width = <8>;
+ };
+ };
+ };
+ };
+
+ usart1: serial@f0020000 {
+ dmas = <0>, <0>; /* Do not use DMA for usart1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+ status = "okay";
+ };
+
+ isi: isi@f0034000 {
+ port {
+ isi_0: endpoint {
+ remote-endpoint = <&ov2640_0>;
+ bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
+ };
+ };
+ };
+
+ mmc1: mmc@f8000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ adc0: adc@f8018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_adc0_adtrg
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ >;
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ phy-mode = "rmii";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@1 {
+ /*interrupt-parent = <&pioE>;*/
+ /*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+ reg = <1>;
+ };
+ };
+
+ pinctrl@fffff200 {
+ board {
+ u-boot,dm-pre-reloc;
+ pinctrl_mmc0_cd: mmc0_cd {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
+ };
+
+ pinctrl_mmc1_cd: mmc1_cd {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
+ };
+
+ pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+ atmel,pins =
+ <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */
+ };
+
+ pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+ atmel,pins =
+ <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */
+ };
+
+ pinctrl_sensor_reset: sensor_reset-0 {
+ atmel,pins =
+ <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */
+ };
+
+ pinctrl_sensor_power: sensor_power-0 {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
+ };
+ };
+ };
+
+ dbgu: serial@ffffee00 {
+ dmas = <0>, <0>; /* Do not use DMA for dbgu */
+ status = "okay";
+ u-boot,dm-pre-reloc;
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+
+ usb0: gadget@00500000 {
+ atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+
+ usb1: ohci@00600000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
+ &pioD 26 GPIO_ACTIVE_LOW
+ &pioD 27 GPIO_ACTIVE_LOW
+ >;
+ status = "okay";
+ };
+
+ usb2: ehci@00700000 {
+ status = "okay";
+ };
+ };
+
+ sound {
+ compatible = "atmel,asoc-wm8904";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+ atmel,model = "wm8904 @ SAMA5D3EK";
+ atmel,audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN2L", "Line In Jack",
+ "IN2R", "Line In Jack",
+ "Mic", "MICBIAS",
+ "IN1L", "Mic";
+
+ atmel,ssc-controller = <&ssc0>;
+ atmel,audio-codec = <&wm8904>;
+
+ status = "disabled";
+ };
+};
--- /dev/null
+/*
+ * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
+ *
+ * Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3xcm_cmp.dtsi"
+
+/ {
+ compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ u-boot,dm-pre-reloc;
+ stdout-path = &dbgu;
+ };
+
+ ahb {
+ apb {
+ mmc0: mmc@f0000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ spi0: spi@f0004000 {
+ dmas = <0>, <0>; /* Do not use DMA for spi0 */
+
+ spi_flash@0 {
+ compatible = "spi-flash";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
+
+ ssc0: ssc@f0008000 {
+ atmel,clk-from-rk-pin;
+ };
+
+ /*
+ * i2c0 conflicts with ISI:
+ * disable it to allow the use of ISI
+ * can not enable audio when i2c0 disabled
+ */
+ i2c0: i2c@f0014000 {
+ wm8904: wm8904@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ clocks = <&pck0>;
+ clock-names = "mclk";
+ };
+ };
+
+ i2c1: i2c@f0018000 {
+ ov2640: camera@0x30 {
+ compatible = "ovti,ov2640";
+ reg = <0x30>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+ resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+ pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+ /* use pck1 for the master clock of ov2640 */
+ clocks = <&pck1>;
+ clock-names = "xvclk";
+ assigned-clocks = <&pck1>;
+ assigned-clock-rates = <25000000>;
+
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint = <&isi_0>;
+ bus-width = <8>;
+ };
+ };
+ };
+ };
+
+ usart1: serial@f0020000 {
+ dmas = <0>, <0>; /* Do not use DMA for usart1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+ status = "okay";
+ };
+
+ isi: isi@f0034000 {
+ port {
+ isi_0: endpoint {
+ remote-endpoint = <&ov2640_0>;
+ bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
+ };
+ };
+ };
+
+ mmc1: mmc@f8000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ adc0: adc@f8018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_adc0_adtrg
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ >;
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ phy-mode = "rmii";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@1 {
+ /*interrupt-parent = <&pioE>;*/
+ /*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+ reg = <1>;
+ };
+ };
+
+ pinctrl@fffff200 {
+ board {
+ pinctrl_gpio_keys: gpio_keys {
+ atmel,pins =
+ <AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins =
+ <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
+ };
+
+ pinctrl_mmc1_cd: mmc1_cd {
+ atmel,pins =
+ <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
+ };
+
+ pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+ atmel,pins =
+ <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */
+ };
+
+ pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+ atmel,pins =
+ <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */
+ };
+
+ pinctrl_sensor_reset: sensor_reset-0 {
+ atmel,pins =
+ <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */
+ };
+
+ pinctrl_sensor_power: sensor_power-0 {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
+ };
+ };
+ };
+
+ dbgu: serial@ffffee00 {
+ dmas = <0>, <0>; /* Do not use DMA for dbgu */
+ status = "okay";
+ u-boot,dm-pre-reloc;
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+
+ usb0: gadget@00500000 {
+ atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+ };
+
+ sound {
+ compatible = "atmel,asoc-wm8904";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+ atmel,model = "wm8904 @ SAMA5D3EK";
+ atmel,audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN2L", "Line In Jack",
+ "IN2R", "Line In Jack",
+ "Mic", "MICBIAS",
+ "IN1L", "Mic";
+
+ atmel,ssc-controller = <&ssc0>;
+ atmel,audio-codec = <&wm8904>;
+
+ status = "disabled";
+ };
+
+ /* Conflict with LCD pins */
+ gpio_keys {
+ compatible = "gpio-keys";
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ pb_user1 {
+ label = "pb_user1";
+ gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
+ *
+ * Copyright (C) 2014 Atmel,
+ * 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Atmel SAMA5D4 family SoC";
+ compatible = "atmel,sama5d4";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &usart3;
+ serial1 = &usart4;
+ serial2 = &usart2;
+ serial3 = &usart0;
+ serial4 = &usart1;
+ serial5 = &uart0;
+ serial6 = &uart1;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ gpio4 = &pioE;
+ pwm0 = &pwm0;
+ ssc0 = &ssc0;
+ ssc1 = &ssc1;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ };
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x20000000>;
+ };
+
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ };
+ };
+
+ ns_sram: sram@00210000 {
+ compatible = "mmio-sram";
+ reg = <0x00210000 0x10000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ u-boot,dm-pre-reloc;
+
+ usb0: gadget@00400000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,sama5d3-udc";
+ reg = <0x00400000 0x100000
+ 0xfc02c000 0x4000>;
+ interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udphs_clk>, <&utmi>;
+ clock-names = "pclk", "hclk";
+ status = "disabled";
+
+ ep0: endpoint@0 {
+ reg = <0>;
+ atmel,fifo-size = <64>;
+ atmel,nb-banks = <1>;
+ };
+
+ ep1: endpoint@1 {
+ reg = <1>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep2: endpoint@2 {
+ reg = <2>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep3: endpoint@3 {
+ reg = <3>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep4: endpoint@4 {
+ reg = <4>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep5: endpoint@5 {
+ reg = <5>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep6: endpoint@6 {
+ reg = <6>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep7: endpoint@7 {
+ reg = <7>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep8: endpoint@8 {
+ reg = <8>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep9: endpoint@9 {
+ reg = <9>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep10: endpoint@10 {
+ reg = <10>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep11: endpoint@11 {
+ reg = <11>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep12: endpoint@12 {
+ reg = <12>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep13: endpoint@13 {
+ reg = <13>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep14: endpoint@14 {
+ reg = <14>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep15: endpoint@15 {
+ reg = <15>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+ };
+
+ usb1: ohci@00500000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00500000 0x100000>;
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
+ status = "disabled";
+ };
+
+ usb2: ehci@00600000 {
+ compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x00600000 0x100000>;
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
+ status = "disabled";
+ };
+
+ L2: cache-controller@00a00000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a00000 0x1000>;
+ interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ nand0: nand@80000000 {
+ compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = < 0x80000000 0x08000000 /* EBI CS3 */
+ 0xfc05c070 0x00000490 /* SMC PMECC regs */
+ 0xfc05c500 0x00000100 /* SMC PMECC Error Location regs */
+ >;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ atmel,nand-has-dma;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ status = "disabled";
+
+ nfc@90000000 {
+ compatible = "atmel,sama5d3-nfc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <
+ 0x90000000 0x08000000 /* NFC Command Registers */
+ 0xfc05c000 0x00000070 /* NFC HSMC regs */
+ 0x00100000 0x00100000 /* NFC SRAM banks */
+ >;
+ clocks = <&hsmc_clk>;
+ atmel,write-by-sram;
+ };
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ u-boot,dm-pre-reloc;
+
+ hlcdc: hlcdc@f0000000 {
+ compatible = "atmel,sama5d4-hlcdc";
+ reg = <0xf0000000 0x4000>;
+ interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+ status = "disabled";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
+
+ dma1: dma-controller@f0004000 {
+ compatible = "atmel,sama5d4-dma";
+ reg = <0xf0004000 0x200>;
+ interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ clocks = <&dma1_clk>;
+ clock-names = "dma_clk";
+ };
+
+ isi: isi@f0008000 {
+ compatible = "atmel,at91sam9g45-isi";
+ reg = <0xf0008000 0x4000>;
+ interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isi_data_0_7>;
+ clocks = <&isi_clk>;
+ clock-names = "isi_clk";
+ status = "disabled";
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ ramc0: ramc@f0010000 {
+ compatible = "atmel,sama5d3-ddramc";
+ reg = <0xf0010000 0x200>;
+ clocks = <&ddrck>, <&mpddr_clk>;
+ clock-names = "ddrck", "mpddr";
+ };
+
+ dma0: dma-controller@f0014000 {
+ compatible = "atmel,sama5d4-dma";
+ reg = <0xf0014000 0x200>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ clocks = <&dma0_clk>;
+ clock-names = "dma_clk";
+ };
+
+ pmc: pmc@f0018000 {
+ compatible = "atmel,sama5d3-pmc", "syscon";
+ reg = <0xf0018000 0x120>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ main_rc_osc: main_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCRCS>;
+ clock-frequency = <12000000>;
+ clock-accuracy = <100000000>;
+ };
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91sam9x5-clk-main";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCSELS>;
+ clocks = <&main_rc_osc &main_osc>;
+ u-boot,dm-pre-reloc;
+ };
+
+ plla: pllack@0 {
+ compatible = "atmel,sama5d3-clk-pll";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <12000000 12000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
+ };
+
+ plladiv: plladivck {
+ compatible = "atmel,at91sam9x5-clk-plldiv";
+ #clock-cells = <0>;
+ clocks = <&plla>;
+ };
+
+ utmi: utmick {
+ compatible = "atmel,at91sam9x5-clk-utmi";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_LOCKU>;
+ clocks = <&main>;
+ u-boot,dm-pre-reloc;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91sam9x5-clk-master";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MCKRDY>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+ atmel,clk-output-range = <125000000 200000000>;
+ atmel,clk-divisors = <1 2 4 3>;
+ };
+
+ h32ck: h32mxck {
+ #clock-cells = <0>;
+ compatible = "atmel,sama5d4-clk-h32mx";
+ clocks = <&mck>;
+ u-boot,dm-pre-reloc;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91sam9x5-clk-usb";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91sam9x5-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ prog0: prog@0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog@1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+
+ prog2: prog@2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ interrupts = <AT91_PMC_PCKRDY(2)>;
+ };
+ };
+
+ smd: smdclk {
+ compatible = "atmel,at91sam9x5-clk-smd";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ u-boot,dm-pre-reloc;
+
+ ddrck: ddrck@2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ clocks = <&mck>;
+ };
+
+ lcdck: lcdck@3 {
+ #clock-cells = <0>;
+ reg = <3>;
+ clocks = <&mck>;
+ };
+
+ smdck: smdck@4 {
+ #clock-cells = <0>;
+ reg = <4>;
+ clocks = <&smd>;
+ };
+
+ uhpck: uhpcki@6 {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck: udpck@7 {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0@8 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1@9 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ pck2: pck2@10 {
+ #clock-cells = <0>;
+ reg = <10>;
+ clocks = <&prog2>;
+ };
+ };
+
+ periph32ck {
+ compatible = "atmel,at91sam9x5-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&h32ck>;
+ u-boot,dm-pre-reloc;
+
+ pioD_clk: pioD_clk@5 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ usart0_clk: usart0_clk@6 {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart1_clk: usart1_clk@7 {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ icm_clk: icm_clk@9 {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ aes_clk: aes_clk@12 {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ tdes_clk: tdes_clk@14 {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ sha_clk: sha_clk@15 {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ matrix1_clk: matrix1_clk@17 {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ hsmc_clk: hsmc_clk@22 {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ pioA_clk: pioA_clk@23 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ pioB_clk: pioB_clk@24 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+
+ pioC_clk: pioC_clk@25 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <25>;
+ };
+
+ pioE_clk: pioE_clk@26 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <26>;
+ };
+
+ uart0_clk: uart0_clk@27 {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+
+ uart1_clk: uart1_clk@28 {
+ #clock-cells = <0>;
+ reg = <28>;
+ };
+
+ usart2_clk: usart2_clk@29 {
+ #clock-cells = <0>;
+ reg = <29>;
+ };
+
+ usart3_clk: usart3_clk@30 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <30>;
+ };
+
+ usart4_clk: usart4_clk@31 {
+ #clock-cells = <0>;
+ reg = <31>;
+ };
+
+ twi0_clk: twi0_clk@32 {
+ reg = <32>;
+ #clock-cells = <0>;
+ };
+
+ twi1_clk: twi1_clk@33 {
+ #clock-cells = <0>;
+ reg = <33>;
+ };
+
+ twi2_clk: twi2_clk@34 {
+ #clock-cells = <0>;
+ reg = <34>;
+ };
+
+ mci0_clk: mci0_clk@35 {
+ #clock-cells = <0>;
+ reg = <35>;
+ };
+
+ mci1_clk: mci1_clk@36 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <36>;
+ };
+
+ spi0_clk: spi0_clk@37 {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ reg = <37>;
+ };
+
+ spi1_clk: spi1_clk@38 {
+ #clock-cells = <0>;
+ reg = <38>;
+ };
+
+ spi2_clk: spi2_clk@39 {
+ #clock-cells = <0>;
+ reg = <39>;
+ };
+
+ tcb0_clk: tcb0_clk@40 {
+ #clock-cells = <0>;
+ reg = <40>;
+ };
+
+ tcb1_clk: tcb1_clk@41 {
+ #clock-cells = <0>;
+ reg = <41>;
+ };
+
+ tcb2_clk: tcb2_clk@42 {
+ #clock-cells = <0>;
+ reg = <42>;
+ };
+
+ pwm_clk: pwm_clk@43 {
+ #clock-cells = <0>;
+ reg = <43>;
+ };
+
+ adc_clk: adc_clk@44 {
+ #clock-cells = <0>;
+ reg = <44>;
+ };
+
+ dbgu_clk: dbgu_clk@45 {
+ #clock-cells = <0>;
+ reg = <45>;
+ };
+
+ uhphs_clk: uhphs_clk@46 {
+ #clock-cells = <0>;
+ reg = <46>;
+ };
+
+ udphs_clk: udphs_clk@47 {
+ #clock-cells = <0>;
+ reg = <47>;
+ };
+
+ ssc0_clk: ssc0_clki@48 {
+ #clock-cells = <0>;
+ reg = <48>;
+ };
+
+ ssc1_clk: ssc1_clk@49 {
+ #clock-cells = <0>;
+ reg = <49>;
+ };
+
+ trng_clk: trng_clk@53 {
+ #clock-cells = <0>;
+ reg = <53>;
+ };
+
+ macb0_clk: macb0_clk@54 {
+ #clock-cells = <0>;
+ reg = <54>;
+ };
+
+ macb1_clk: macb1_clk@55 {
+ #clock-cells = <0>;
+ reg = <55>;
+ };
+
+ fuse_clk: fuse_clk@57 {
+ #clock-cells = <0>;
+ reg = <57>;
+ };
+
+ securam_clk: securam_clk@59 {
+ #clock-cells = <0>;
+ reg = <59>;
+ };
+
+ smd_clk: smd_clk@61 {
+ #clock-cells = <0>;
+ reg = <61>;
+ };
+
+ twi3_clk: twi3_clk@62 {
+ #clock-cells = <0>;
+ reg = <62>;
+ };
+
+ catb_clk: catb_clk@63 {
+ #clock-cells = <0>;
+ reg = <63>;
+ };
+ };
+
+ periph64ck {
+ compatible = "atmel,at91sam9x5-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ dma0_clk: dma0_clk@8 {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ cpkcc_clk: cpkcc_clk@10 {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ aesb_clk: aesb_clk@13 {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ mpddr_clk: mpddr_clk@16 {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
+ matrix0_clk: matrix0_clk@18 {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ vdec_clk: vdec_clk@19 {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ dma1_clk: dma1_clk@50 {
+ #clock-cells = <0>;
+ reg = <50>;
+ };
+
+ lcdc_clk: lcdc_clk@51 {
+ #clock-cells = <0>;
+ reg = <51>;
+ };
+
+ isi_clk: isi_clk@52 {
+ #clock-cells = <0>;
+ reg = <52>;
+ };
+ };
+ };
+
+ mmc0: mmc@f8000000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf8000000 0x600>;
+ interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(0))>;
+ dma-names = "rxtx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
+ };
+
+ uart0: serial@f8004000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8004000 0x100>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(22))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(23))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart0_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ ssc0: ssc@f8008000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf8008000 0x4000>;
+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(26))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(27))>;
+ dma-names = "tx", "rx";
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
+ pwm0: pwm@f800c000 {
+ compatible = "atmel,sama5d3-pwm";
+ reg = <0xf800c000 0x300>;
+ interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+ #pwm-cells = <3>;
+ clocks = <&pwm_clk>;
+ status = "disabled";
+ };
+
+ spi0: spi@f8010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf8010000 0x100>;
+ interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(10))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(11))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
+ status = "disabled";
+ };
+
+ i2c0: i2c@f8014000 {
+ compatible = "atmel,sama5d4-i2c";
+ reg = <0xf8014000 0x4000>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(2))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(3))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi0_clk>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@f8018000 {
+ compatible = "atmel,sama5d4-i2c";
+ reg = <0xf8018000 0x4000>;
+ interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(4))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(5))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi1_clk>;
+ status = "disabled";
+ };
+
+ tcb0: timer@f801c000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xf801c000 0x100>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb0_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+ };
+
+ macb0: ethernet@f8020000 {
+ compatible = "atmel,sama5d4-gem";
+ reg = <0xf8020000 0x100>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_rmii>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
+ status = "disabled";
+ };
+
+ i2c2: i2c@f8024000 {
+ compatible = "atmel,sama5d4-i2c";
+ reg = <0xf8024000 0x4000>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(6))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(7))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi2_clk>;
+ status = "disabled";
+ };
+
+ sfr: sfr@f8028000 {
+ compatible = "atmel,sama5d4-sfr", "syscon";
+ reg = <0xf8028000 0x60>;
+ };
+
+ usart0: serial@f802c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf802c000 0x100>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(36))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(37))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart1: serial@f8030000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8030000 0x100>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(38))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(39))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ mmc1: mmc@fc000000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfc000000 0x600>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(1))>;
+ dma-names = "rxtx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mci1_clk>;
+ clock-names = "mci_clk";
+ };
+
+ uart1: serial@fc004000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfc004000 0x100>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(24))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(25))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&uart1_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart2: serial@fc008000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfc008000 0x100>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(16))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(17))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart3: serial@fc00c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfc00c000 0x100>;
+ interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(18))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(19))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart4: serial@fc010000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfc010000 0x100>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(20))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(21))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart4>;
+ clocks = <&usart4_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ ssc1: ssc@fc014000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xfc014000 0x4000>;
+ interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(28))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(29))>;
+ dma-names = "tx", "rx";
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
+ spi1: spi@fc018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfc018000 0x100>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(12))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(13))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
+ status = "disabled";
+ };
+
+ spi2: spi@fc01c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfc01c000 0x100>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(14))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(15))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ clocks = <&spi2_clk>;
+ clock-names = "spi_clk";
+ status = "disabled";
+ };
+
+ tcb1: timer@fc020000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xfc020000 0x100>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb1_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+ };
+
+ macb1: ethernet@fc028000 {
+ compatible = "atmel,sama5d4-gem";
+ reg = <0xfc028000 0x100>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb1_rmii>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&macb1_clk>, <&macb1_clk>;
+ clock-names = "hclk", "pclk";
+ status = "disabled";
+ };
+
+ trng@fc030000 {
+ compatible = "atmel,at91sam9g45-trng";
+ reg = <0xfc030000 0x100>;
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&trng_clk>;
+ };
+
+ adc0: adc@fc034000 {
+ compatible = "atmel,at91sam9x5-adc";
+ reg = <0xfc034000 0x100>;
+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&adc_clk>,
+ <&adc_op_clk>;
+ clock-names = "adc_clk", "adc_op_clk";
+ atmel,adc-channels-used = <0x01f>;
+ atmel,adc-startup-time = <40>;
+ atmel,adc-use-external-triggers;
+ atmel,adc-vref = <3000>;
+ atmel,adc-res = <8 10>;
+ atmel,adc-sample-hold-time = <11>;
+ atmel,adc-res-names = "lowres", "highres";
+ atmel,adc-ts-pressure-threshold = <10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ trigger@0 {
+ trigger-name = "external-rising";
+ trigger-value = <0x1>;
+ trigger-external;
+ reg = <0>;
+ };
+ trigger@1 {
+ trigger-name = "external-falling";
+ trigger-value = <0x2>;
+ trigger-external;
+ reg = <1>;
+ };
+ trigger@2 {
+ trigger-name = "external-any";
+ trigger-value = <0x3>;
+ trigger-external;
+ reg = <2>;
+ };
+ trigger@3 {
+ trigger-name = "continuous";
+ trigger-value = <0x6>;
+ reg = <3>;
+ };
+ };
+
+ aes@fc044000 {
+ compatible = "atmel,at91sam9g46-aes";
+ reg = <0xfc044000 0x100>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(41))>,
+ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(40))>;
+ dma-names = "tx", "rx";
+ clocks = <&aes_clk>;
+ clock-names = "aes_clk";
+ status = "okay";
+ };
+
+ tdes@fc04c000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xfc04c000 0x100>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(42))>,
+ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(43))>;
+ dma-names = "tx", "rx";
+ clocks = <&tdes_clk>;
+ clock-names = "tdes_clk";
+ status = "okay";
+ };
+
+ sha@fc050000 {
+ compatible = "atmel,at91sam9g46-sha";
+ reg = <0xfc050000 0x100>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(44))>;
+ dma-names = "tx";
+ clocks = <&sha_clk>;
+ clock-names = "sha_clk";
+ status = "okay";
+ };
+
+ rstc@fc068600 {
+ compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+ reg = <0xfc068600 0x10>;
+ clocks = <&clk32k>;
+ };
+
+ shdwc@fc068610 {
+ compatible = "atmel,at91sam9x5-shdwc";
+ reg = <0xfc068610 0x10>;
+ clocks = <&clk32k>;
+ };
+
+ pit: timer@fc068630 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfc068630 0x10>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&h32ck>;
+ };
+
+ watchdog@fc068640 {
+ compatible = "atmel,sama5d4-wdt";
+ reg = <0xfc068640 0x10>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
+ status = "disabled";
+ };
+
+ sckc@fc068650 {
+ compatible = "atmel,at91sam9x5-sckc";
+ reg = <0xfc068650 0x4>;
+
+ slow_rc_osc: slow_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-accuracy = <250000000>;
+ atmel,startup-time-usec = <75>;
+ };
+
+ slow_osc: slow_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-osc";
+ #clock-cells = <0>;
+ clocks = <&slow_xtal>;
+ atmel,startup-time-usec = <1200000>;
+ };
+
+ clk32k: slowck {
+ compatible = "atmel,at91sam9x5-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc &slow_osc>;
+ };
+ };
+
+ rtc@fc0686b0 {
+ compatible = "atmel,at91rm9200-rtc";
+ reg = <0xfc0686b0 0x30>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
+ };
+
+ dbgu: serial@fc069000 {
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ reg = <0xfc069000 0x200>;
+ interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&dbgu_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ pioA: gpio@fc06a000 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfc06a000 0x100>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
+ };
+
+ pioB: gpio@fc06b000 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfc06b000 0x100>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
+ };
+
+ pioC: gpio@fc06c000 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfc06c000 0x100>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
+ u-boot,dm-pre-reloc;
+ };
+
+ pioD: gpio@fc068000 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfc068000 0x100>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioD_clk>;
+ };
+
+ pioE: gpio@fc06d000 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfc06d000 0x100>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioE_clk>;
+ };
+
+ pinctrl@fc06a000 {
+ u-boot,dm-pre-reloc;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfc068000 0xfc068000 0x100
+ 0xfc06a000 0xfc06a000 0x4000>;
+ /* WARNING: revisit as pin spec has changed */
+ atmel,mux-mask = <
+ /* A B C */
+ 0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */
+ 0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */
+ 0xffffffff 0x3ff83fff 0xff00ffff /* pioC */
+ 0x0003ff00 0x8002a800 0x00000000 /* pioD */
+ 0xffffffff 0x7fffffff 0x76fff1bf /* pioE */
+ >;
+ reg = < 0xfc06a000 0x100
+ 0xfc06b000 0x100
+ 0xfc06c000 0x100
+ 0xfc068000 0x100
+ 0xfc06d000 0x100
+ >;
+
+ /* pinctrl pin settings */
+ adc0 {
+ pinctrl_adc0_adtrg: adc0_adtrg {
+ atmel,pins =
+ <AT91_PIOE 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with USBA_VBUS */
+ };
+ pinctrl_adc0_ad0: adc0_ad0 {
+ atmel,pins =
+ <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad1: adc0_ad1 {
+ atmel,pins =
+ <AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad2: adc0_ad2 {
+ atmel,pins =
+ <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad3: adc0_ad3 {
+ atmel,pins =
+ <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad4: adc0_ad4 {
+ atmel,pins =
+ <AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>, /* conflicts with D14 and TDI */
+ <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with D15 and TDO */
+ };
+ };
+
+ i2c0 {
+ pinctrl_i2c0: i2c0-0 {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1: i2c1-0 {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */
+ AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2: i2c2-0 {
+ atmel,pins =
+ <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* TWD2, conflicts with RD0 and PWML1 */
+ AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
+ };
+ };
+
+ isi {
+ pinctrl_isi_data_0_7: isi-0-data-0-7 {
+ atmel,pins =
+ <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D0 */
+ AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D1 */
+ AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D2 */
+ AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D3 */
+ AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D4 */
+ AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D5 */
+ AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D6 */
+ AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D7 */
+ AT91_PIOB 1 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_PCK, conflict with G0_RXCK */
+ AT91_PIOB 3 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_VSYNC */
+ AT91_PIOB 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_HSYNC */
+ };
+ pinctrl_isi_data_8_9: isi-0-data-8-9 {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_D8, conflicts with SPI0_MISO, PWMH2 */
+ AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_D9, conflicts with SPI0_MOSI, PWML2 */
+ };
+ pinctrl_isi_data_10_11: isi-0-data-10-11 {
+ atmel,pins =
+ <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_D10, conflicts with SPI0_SPCK, PWMH3 */
+ AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */
+ };
+ };
+
+ lcd {
+ pinctrl_lcd_base: lcd-base-0 {
+ atmel,pins =
+ <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */
+ AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */
+ AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */
+ AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */
+ };
+ pinctrl_lcd_pwm: lcd-pwm-0 {
+ atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */
+ };
+ pinctrl_lcd_rgb444: lcd-rgb-0 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */
+ };
+ pinctrl_lcd_rgb565: lcd-rgb-1 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */
+ };
+ pinctrl_lcd_rgb666: lcd-rgb-2 {
+ atmel,pins =
+ <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
+ AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
+ AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
+ AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
+ AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
+ AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
+ AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
+ };
+ pinctrl_lcd_rgb777: lcd-rgb-3 {
+ atmel,pins =
+ /* LCDDAT0 conflicts with TMS */
+ <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ /* LCDDAT8 conflicts with TCK */
+ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
+ /* LCDDAT16 conflicts with NTRST */
+ AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
+ AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
+ AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
+ AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
+ AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
+ AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
+ AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
+ };
+ pinctrl_lcd_rgb888: lcd-rgb-4 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
+ AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
+ AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
+ AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
+ AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
+ AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
+ AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
+ AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
+ AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
+ };
+ };
+
+ macb0 {
+ pinctrl_macb0_rmii: macb0_rmii-0 {
+ atmel,pins =
+ <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TX0 */
+ AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TX1 */
+ AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RX0 */
+ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RX1 */
+ AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RXDV */
+ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RXER */
+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TXEN */
+ AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TXCK */
+ AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_MDC */
+ AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_MDIO */
+ >;
+ };
+ };
+
+ macb1 {
+ pinctrl_macb1_rmii: macb1_rmii-0 {
+ atmel,pins =
+ <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX0 */
+ AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX1 */
+ AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX0 */
+ AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX1 */
+ AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXDV */
+ AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXER */
+ AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXEN */
+ AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXCK */
+ AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDC */
+ AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDIO */
+ >;
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+ atmel,pins =
+ <AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* MCI0_CK, conflict with PCK1(ISI_MCK) */
+ AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_CDA, conflict with NAND_D0 */
+ AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA0, conflict with NAND_D1 */
+ >;
+ };
+ pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+ atmel,pins =
+ <AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA1, conflict with NAND_D2 */
+ AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA2, conflict with NAND_D3 */
+ AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA3, conflict with NAND_D4 */
+ >;
+ };
+ pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+ atmel,pins =
+ <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA4, conflict with NAND_D5 */
+ AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA5, conflict with NAND_D6 */
+ AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA6, conflict with NAND_D7 */
+ AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA7, conflict with NAND_OE */
+ >;
+ };
+ };
+
+ mmc1 {
+ u-boot,dm-pre-reloc;
+ pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOE 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* MCI1_CK */
+ AT91_PIOE 19 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_CDA */
+ AT91_PIOE 20 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA0 */
+ >;
+ };
+ pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOE 21 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA1 */
+ AT91_PIOE 22 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA2 */
+ AT91_PIOE 23 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA3 */
+ >;
+ };
+ };
+
+ nand0 {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A Read Enable */
+ AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC14 periph A Write Enable */
+
+ AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC17 ALE */
+ AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC18 CLE */
+
+ AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC15 NCS3/Chip Enable */
+ AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC16 NANDRDY */
+ AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 Data bit 0 */
+ AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 Data bit 1 */
+ AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 Data bit 2 */
+ AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 Data bit 3 */
+ AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC9 Data bit 4 */
+ AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC10 Data bit 5 */
+ AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC11 periph A Data bit 6 */
+ AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC12 periph A Data bit 7 */
+ };
+ };
+
+ spi0 {
+ u-boot,dm-pre-reloc;
+ pinctrl_spi0: spi0-0 {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_MISO */
+ AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_MOSI */
+ AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_SPCK */
+ >;
+ };
+ };
+
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx {
+ atmel,pins =
+ <AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* TK0 */
+ AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE /* TF0 */
+ AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TD0 */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx {
+ atmel,pins =
+ <AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* RK0 */
+ AT91_PIOB 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* RF0 */
+ AT91_PIOB 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* RD0 */
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx {
+ atmel,pins =
+ <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* TK1 */
+ AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* TF1 */
+ AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TD1 */
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx {
+ atmel,pins =
+ <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* RK1 */
+ AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* RF1 */
+ AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* RD1 */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MISO */
+ AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MOSI */
+ AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_SPCK */
+ >;
+ };
+ };
+
+ spi2 {
+ pinctrl_spi2: spi2-0 {
+ atmel,pins =
+ <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MISO conflicts with RTS0 */
+ AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MOSI conflicts with TXD0 */
+ AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_SPCK conflicts with RTS1 */
+ >;
+ };
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ };
+
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD - conflicts with G0_CRS, ISI_HSYNC */
+ AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD - conflicts with G0_COL, PCK2 */
+ >;
+ };
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with G0_RX3, PWMH1 */
+ };
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with G0_TXER, ISI_VSYNC */
+ };
+ };
+
+ usart3 {
+ u-boot,dm-pre-reloc;
+ pinctrl_usart3: usart3-0 {
+ u-boot,dm-pre-reloc;
+ atmel,pins =
+ <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ };
+
+ usart4 {
+ pinctrl_usart4: usart4-0 {
+ atmel,pins =
+ <AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ pinctrl_usart4_rts: usart4_rts-0 {
+ atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with NWAIT, A19 */
+ };
+ pinctrl_usart4_cts: usart4_cts-0 {
+ atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with A0/NBS0, MCI0_CDB */
+ };
+ };
+ };
+
+ aic: interrupt-controller@fc06e000 {
+ #interrupt-cells = <3>;
+ compatible = "atmel,sama5d4-aic";
+ interrupt-controller;
+ reg = <0xfc06e000 0x200>;
+ atmel,external-irqs = <56>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * (C) Copyright 2016 Carlo Caione <carlo@caione.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __SD_EMMC_H__
+#define __SD_EMMC_H__
+
+#include <mmc.h>
+
+#define SDIO_PORT_A 0
+#define SDIO_PORT_B 1
+#define SDIO_PORT_C 2
+
+#define SD_EMMC_CLKSRC_24M 24000000 /* 24 MHz */
+#define SD_EMMC_CLKSRC_DIV2 1000000000 /* 1 GHz */
+
+#define MESON_SD_EMMC_CLOCK 0x00
+#define CLK_MAX_DIV 63
+#define CLK_SRC_24M (0 << 6)
+#define CLK_SRC_DIV2 (1 << 6)
+#define CLK_CO_PHASE_000 (0 << 8)
+#define CLK_CO_PHASE_090 (1 << 8)
+#define CLK_CO_PHASE_180 (2 << 8)
+#define CLK_CO_PHASE_270 (3 << 8)
+#define CLK_TX_PHASE_000 (0 << 10)
+#define CLK_TX_PHASE_090 (1 << 10)
+#define CLK_TX_PHASE_180 (2 << 10)
+#define CLK_TX_PHASE_270 (3 << 10)
+#define CLK_ALWAYS_ON BIT(24)
+
+#define MESON_SD_EMMC_CFG 0x44
+#define CFG_BUS_WIDTH_MASK GENMASK(1, 0)
+#define CFG_BUS_WIDTH_1 0
+#define CFG_BUS_WIDTH_4 1
+#define CFG_BUS_WIDTH_8 2
+#define CFG_BL_LEN_MASK GENMASK(7, 4)
+#define CFG_BL_LEN_SHIFT 4
+#define CFG_BL_LEN_512 (9 << 4)
+#define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8)
+#define CFG_RESP_TIMEOUT_256 (8 << 8)
+#define CFG_RC_CC_MASK GENMASK(15, 12)
+#define CFG_RC_CC_16 (4 << 12)
+#define CFG_SDCLK_ALWAYS_ON BIT(18)
+#define CFG_AUTO_CLK BIT(23)
+
+#define MESON_SD_EMMC_STATUS 0x48
+#define STATUS_MASK GENMASK(15, 0)
+#define STATUS_ERR_MASK GENMASK(12, 0)
+#define STATUS_RXD_ERR_MASK GENMASK(7, 0)
+#define STATUS_TXD_ERR BIT(8)
+#define STATUS_DESC_ERR BIT(9)
+#define STATUS_RESP_ERR BIT(10)
+#define STATUS_RESP_TIMEOUT BIT(11)
+#define STATUS_DESC_TIMEOUT BIT(12)
+#define STATUS_END_OF_CHAIN BIT(13)
+
+#define MESON_SD_EMMC_IRQ_EN 0x4c
+
+#define MESON_SD_EMMC_CMD_CFG 0x50
+#define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
+#define CMD_CFG_BLOCK_MODE BIT(9)
+#define CMD_CFG_R1B BIT(10)
+#define CMD_CFG_END_OF_CHAIN BIT(11)
+#define CMD_CFG_TIMEOUT_4S (12 << 12)
+#define CMD_CFG_NO_RESP BIT(16)
+#define CMD_CFG_DATA_IO BIT(18)
+#define CMD_CFG_DATA_WR BIT(19)
+#define CMD_CFG_RESP_NOCRC BIT(20)
+#define CMD_CFG_RESP_128 BIT(21)
+#define CMD_CFG_CMD_INDEX_SHIFT 24
+#define CMD_CFG_OWNER BIT(31)
+
+#define MESON_SD_EMMC_CMD_ARG 0x54
+#define MESON_SD_EMMC_CMD_DAT 0x58
+#define MESON_SD_EMMC_CMD_RSP 0x5c
+#define MESON_SD_EMMC_CMD_RSP1 0x60
+#define MESON_SD_EMMC_CMD_RSP2 0x64
+#define MESON_SD_EMMC_CMD_RSP3 0x68
+
+struct meson_mmc_platdata {
+ struct mmc_config cfg;
+ struct mmc mmc;
+ void *regbase;
+ void *w_buf;
+};
+
+#endif
void at91_serial0_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */
- at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */
at91_periph_clk_enable(ATMEL_ID_USART0);
}
void at91_serial1_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */
- at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */
at91_periph_clk_enable(ATMEL_ID_USART1);
}
void at91_serial2_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */
- at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */
at91_periph_clk_enable(ATMEL_ID_USART2);
}
void at91_serial3_hw_init(void)
{
- at91_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */
- at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */
at91_periph_clk_enable(ATMEL_ID_USART3);
}
void at91_seriald_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
- at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
at91_periph_clk_enable(ATMEL_ID_SYS);
}
#ifdef CONFIG_ATMEL_SPI
void at91_spi0_hw_init(unsigned long cs_mask)
{
- at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */
at91_periph_clk_enable(ATMEL_ID_SPI0);
void at91_spi1_hw_init(unsigned long cs_mask)
{
- at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */
- at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */
- at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */
+ at91_pio3_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */
+ at91_pio3_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */
+ at91_pio3_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */
at91_periph_clk_enable(ATMEL_ID_SPI1);
void at91_mci_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */
- at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */
- at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */
- at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* MCDA1 */
- at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */
- at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* MCDA1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */
at91_periph_clk_enable(ATMEL_ID_HSMCI0);
}
#ifdef CONFIG_LCD
void at91_lcd_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */
- at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */
- at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */
- at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */
- at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
- at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */
-
- at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
- at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
- at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
- at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
- at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
- at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
- at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
- at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
- at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
- at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
- at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
- at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
- at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
- at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
- at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
- at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
- at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
- at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
- at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
- at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
- at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
- at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
- at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
- at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
at91_periph_clk_enable(ATMEL_ID_LCDC);
}
void at91_seriald_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
- at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
at91_periph_clk_enable(ATMEL_ID_SYS);
}
void at91_serial0_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD */
- at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD */
at91_periph_clk_enable(ATMEL_ID_USART0);
}
void at91_serial1_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD */
- at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD */
at91_periph_clk_enable(ATMEL_ID_USART1);
}
void at91_serial2_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD */
- at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD */
at91_periph_clk_enable(ATMEL_ID_USART2);
}
void at91_mci_hw_init(void)
{
/* Initialize the MCI0 */
- at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* MCCK */
- at91_set_a_periph(AT91_PIO_PORTA, 16, 1); /* MCCDA */
- at91_set_a_periph(AT91_PIO_PORTA, 15, 1); /* MCDA0 */
- at91_set_a_periph(AT91_PIO_PORTA, 18, 1); /* MCDA1 */
- at91_set_a_periph(AT91_PIO_PORTA, 19, 1); /* MCDA2 */
- at91_set_a_periph(AT91_PIO_PORTA, 20, 1); /* MCDA3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 1); /* MCCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 1); /* MCCDA */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 1); /* MCDA0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 1); /* MCDA1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 1); /* MCDA2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 1); /* MCDA3 */
at91_periph_clk_enable(ATMEL_ID_HSMCI0);
}
#ifdef CONFIG_ATMEL_SPI
void at91_spi0_hw_init(unsigned long cs_mask)
{
- at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */
at91_periph_clk_enable(ATMEL_ID_SPI0);
if (cs_mask & (1 << 0))
- at91_set_a_periph(AT91_PIO_PORTA, 14, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0);
if (cs_mask & (1 << 1))
- at91_set_b_periph(AT91_PIO_PORTA, 7, 0);
+ at91_pio3_set_b_periph(AT91_PIO_PORTA, 7, 0);
if (cs_mask & (1 << 2))
- at91_set_b_periph(AT91_PIO_PORTA, 1, 0);
+ at91_pio3_set_b_periph(AT91_PIO_PORTA, 1, 0);
if (cs_mask & (1 << 3))
- at91_set_b_periph(AT91_PIO_PORTB, 3, 0);
+ at91_pio3_set_b_periph(AT91_PIO_PORTB, 3, 0);
if (cs_mask & (1 << 4))
at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
if (cs_mask & (1 << 5))
void at91_spi1_hw_init(unsigned long cs_mask)
{
- at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */
- at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */
- at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */
+ at91_pio3_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */
+ at91_pio3_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */
+ at91_pio3_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */
at91_periph_clk_enable(ATMEL_ID_SPI1);
if (cs_mask & (1 << 0))
- at91_set_b_periph(AT91_PIO_PORTA, 8, 0);
+ at91_pio3_set_b_periph(AT91_PIO_PORTA, 8, 0);
if (cs_mask & (1 << 1))
- at91_set_b_periph(AT91_PIO_PORTA, 0, 0);
+ at91_pio3_set_b_periph(AT91_PIO_PORTA, 0, 0);
if (cs_mask & (1 << 2))
- at91_set_b_periph(AT91_PIO_PORTA, 31, 0);
+ at91_pio3_set_b_periph(AT91_PIO_PORTA, 31, 0);
if (cs_mask & (1 << 3))
- at91_set_b_periph(AT91_PIO_PORTA, 30, 0);
+ at91_pio3_set_b_periph(AT91_PIO_PORTA, 30, 0);
if (cs_mask & (1 << 4))
at91_set_pio_output(AT91_PIO_PORTA, 8, 0);
if (cs_mask & (1 << 5))
/* Enable EMAC0 clock */
at91_periph_clk_enable(ATMEL_ID_EMAC0);
/* EMAC0 pins setup */
- at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */
- at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */
- at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ERX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* ERX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ERXER */
- at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ETXEN */
- at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ETX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 10, 0); /* ETX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* EMDIO */
- at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* EMDC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ERX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 1, 0); /* ERX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ERXER */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ETXEN */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ETX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 10, 0); /* ETX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 5, 0); /* EMDIO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* EMDC */
}
if (has_emac1()) {
/* Enable EMAC1 clock */
at91_periph_clk_enable(ATMEL_ID_EMAC1);
/* EMAC1 pins setup */
- at91_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */
- at91_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */
- at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ERXO */
- at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ERX1 */
- at91_set_b_periph(AT91_PIO_PORTC, 16, 0); /* ERXER */
- at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ETXEN */
- at91_set_b_periph(AT91_PIO_PORTC, 18, 0); /* ETX0 */
- at91_set_b_periph(AT91_PIO_PORTC, 19, 0); /* ETX1 */
- at91_set_b_periph(AT91_PIO_PORTC, 31, 0); /* EMDIO */
- at91_set_b_periph(AT91_PIO_PORTC, 30, 0); /* EMDC */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ERXO */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ERX1 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 16, 0); /* ERXER */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ETXEN */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 18, 0); /* ETX0 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 19, 0); /* ETX1 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 31, 0); /* EMDIO */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 30, 0); /* EMDC */
}
#ifndef CONFIG_RMII
/* Only emac0 support MII */
if (has_emac0()) {
- at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */
- at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */
- at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */
- at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */
- at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */
- at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */
- at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */
- at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */
}
#endif
}
void at91_serial0_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTD, 18, 1); /* TXD0 */
- at91_set_a_periph(AT91_PIO_PORTD, 17, 0); /* RXD0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 18, 1); /* TXD0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 17, 0); /* RXD0 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_USART0);
void at91_serial1_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTB, 29, 1); /* TXD1 */
- at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* RXD1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 29, 1); /* TXD1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 28, 0); /* RXD1 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_USART1);
void at91_serial2_hw_init(void)
{
- at91_set_b_periph(AT91_PIO_PORTE, 26, 1); /* TXD2 */
- at91_set_b_periph(AT91_PIO_PORTE, 25, 0); /* RXD2 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTE, 26, 1); /* TXD2 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTE, 25, 0); /* RXD2 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_USART2);
void at91_seriald_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTB, 31, 1); /* DTXD */
- at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* DRXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 31, 1); /* DTXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 30, 0); /* DRXD */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_DBGU);
#if defined(CONFIG_ATMEL_SPI)
void at91_spi0_hw_init(unsigned long cs_mask)
{
- at91_set_a_periph(AT91_PIO_PORTD, 10, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTD, 11, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTD, 12, 0); /* SPI0_SPCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 0); /* SPI0_MISO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 0); /* SPI0_MOSI */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 0); /* SPI0_SPCK */
if (cs_mask & (1 << 0))
at91_set_pio_output(AT91_PIO_PORTD, 13, 1);
#ifdef CONFIG_GENERIC_ATMEL_MCI
void at91_mci_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTD, 0, 0); /* MCI0 CMD */
- at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* MCI0 DA0 */
- at91_set_a_periph(AT91_PIO_PORTD, 2, 0); /* MCI0 DA1 */
- at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* MCI0 DA2 */
- at91_set_a_periph(AT91_PIO_PORTD, 4, 0); /* MCI0 DA3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 0); /* MCI0 CMD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 0); /* MCI0 DA0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 0); /* MCI0 DA1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 0); /* MCI0 DA2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 4, 0); /* MCI0 DA3 */
#ifdef CONFIG_ATMEL_MCI_8BIT
- at91_set_a_periph(AT91_PIO_PORTD, 5, 0); /* MCI0 DA4 */
- at91_set_a_periph(AT91_PIO_PORTD, 6, 0); /* MCI0 DA5 */
- at91_set_a_periph(AT91_PIO_PORTD, 7, 0); /* MCI0 DA6 */
- at91_set_a_periph(AT91_PIO_PORTD, 8, 0); /* MCI0 DA7 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 5, 0); /* MCI0 DA4 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 0); /* MCI0 DA5 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 0); /* MCI0 DA6 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 0); /* MCI0 DA7 */
#endif
- at91_set_a_periph(AT91_PIO_PORTD, 9, 0); /* MCI0 CLK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 0); /* MCI0 CLK */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_MCI0);
#ifdef CONFIG_MACB
void at91_macb_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* ETXCK_EREFCK */
- at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* ERXDV */
- at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* ERX0 */
- at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* ERX1 */
- at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* ERXER */
- at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* ETXEN */
- at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* ETX0 */
- at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* ETX1 */
- at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* EMDIO */
- at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* EMDC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* ETXCK_EREFCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* ERXDV */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* ERX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0); /* ERX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* ERXER */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0); /* ETXEN */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* ETX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* ETX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* EMDIO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* EMDC */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_EMAC);
void at91_gmac_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* GTX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* GTX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* GTX2 */
- at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* GTX3 */
- at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* GRX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* GRX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* GRX2 */
- at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* GRX3 */
- at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* GTXCK */
- at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* GTXEN */
-
- at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* GRXCK */
- at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* GRXER */
-
- at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* GMDC */
- at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* GMDIO */
- at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* G125CK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* GTX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 1, 0); /* GTX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* GTX2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 3, 0); /* GTX3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 4, 0); /* GRX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 5, 0); /* GRX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* GRX2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* GRX3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* GTXCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* GTXEN */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 11, 0); /* GRXCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* GRXER */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* GMDC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* GMDIO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 18, 0); /* G125CK */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_GMAC);
#ifdef CONFIG_LCD
void at91_lcd_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
- at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
- at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
- at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
- at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
- at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
/* The lower 16-bit of LCD only available on Port A */
- at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
- at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
- at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
- at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
- at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
- at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
- at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
- at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
- at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD8 */
- at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD9 */
- at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
- at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
- at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
- at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
- at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
- at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD8 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD9 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_LCDC);
*(.__end)
} >.sram
+ _image_binary_end = .;
+
.bss :
{
. = ALIGN(4);
#define AT91_ASM_PIOD_ASR \
(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x70)
+#define PIO_SCDR_DIV 0x3fff /* Slow Clock Divider Selection for Debouncing Mask */
+
#ifndef __ASSEMBLY__
typedef struct at91_port {
u32 puer; /* 0x64 Pull-up Enable Register */
u32 pusr; /* 0x68 Pad Pull-up Status Register */
u32 reserved4;
-#if defined(CPU_HAS_PIO3)
- u32 abcdsr1; /* 0x70 Peripheral ABCD Select Register 1 */
- u32 abcdsr2; /* 0x74 Peripheral ABCD Select Register 2 */
- u32 reserved5[2];
- u32 ifscdr; /* 0x80 Input Filter SCLK Disable Register */
- u32 ifscer; /* 0x84 Input Filter SCLK Enable Register */
- u32 ifscsr; /* 0x88 Input Filter SCLK Status Register */
- u32 scdr; /* 0x8C SCLK Divider Debouncing Register */
- u32 ppddr; /* 0x90 Pad Pull-down Disable Register */
- u32 ppder; /* 0x94 Pad Pull-down Enable Register */
- u32 ppdsr; /* 0x98 Pad Pull-down Status Register */
- u32 reserved6; /* */
-#else
- u32 asr; /* 0x70 Select A Register */
- u32 bsr; /* 0x74 Select B Register */
- u32 absr; /* 0x78 AB Select Status Register */
- u32 reserved5[9]; /* */
-#endif
+ union {
+ struct {
+ u32 abcdsr1; /* 0x70 Peripheral ABCD Select Register 1 */
+ u32 abcdsr2; /* 0x74 Peripheral ABCD Select Register 2 */
+ u32 reserved5[2];
+ u32 ifscdr; /* 0x80 Input Filter SCLK Disable Register */
+ u32 ifscer; /* 0x84 Input Filter SCLK Enable Register */
+ u32 ifscsr; /* 0x88 Input Filter SCLK Status Register */
+ u32 scdr; /* 0x8C SCLK Divider Debouncing Register */
+ u32 ppddr; /* 0x90 Pad Pull-down Disable Register */
+ u32 ppder; /* 0x94 Pad Pull-down Enable Register */
+ u32 ppdsr; /* 0x98 Pad Pull-down Status Register */
+ u32 reserved6; /* */
+ } pio3;
+
+ struct {
+ u32 asr; /* 0x70 Select A Register */
+ u32 bsr; /* 0x74 Select B Register */
+ u32 absr; /* 0x78 AB Select Status Register */
+ u32 reserved5[9]; /* */
+ } pio2;
+ } mux;
+
u32 ower; /* 0xA0 Output Write Enable Register */
u32 owdr; /* 0xA4 Output Write Disable Register */
u32 owsr; /* OxA8 Output Write Status Register */
-#if defined(CPU_HAS_PIO3)
u32 reserved7; /* */
u32 aimer; /* 0xB0 Additional INT Modes Enable Register */
u32 aimdr; /* 0xB4 Additional INT Modes Disable Register */
u32 wpsr; /* 0xE8 Write Protect Status Register */
u32 reserved11[5]; /* */
u32 schmitt; /* 0x100 Schmitt Trigger Register */
- u32 reserved12[63];
-#else
- u32 reserved6[85];
-#endif
+ u32 reserved12[4]; /* 0x104 ~ 0x110 */
+ u32 driver1; /* 0x114 I/O Driver Register1(AT91SAM9x5's driver1) */
+ u32 driver12; /* 0x118 I/O Driver Register12(AT91SAM9x5's driver2 or SAMA5D3x's driver1 ) */
+ u32 driver2; /* 0x11C I/O Driver Register2(SAMA5D3x's driver2) */
+ u32 reserved13[12]; /* 0x120 ~ 0x14C */
} at91_port_t;
typedef union at91_pio {
#ifdef CONFIG_AT91_GPIO
int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup);
int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup);
-#if defined(CPU_HAS_PIO3)
-int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup);
-int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup);
-int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div);
-int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on);
-int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin);
-#endif
int at91_set_pio_input(unsigned port, unsigned pin, int use_pullup);
int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on);
int at91_set_pio_output(unsigned port, unsigned pin, int value);
int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on);
int at91_set_pio_value(unsigned port, unsigned pin, int value);
int at91_get_pio_value(unsigned port, unsigned pin);
+
+int at91_pio3_set_a_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_pio3_set_b_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_pio3_set_c_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_pio3_set_d_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_pio3_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div);
+int at91_pio3_set_pio_pullup(unsigned port, unsigned pin, int use_pullup);
+int at91_pio3_set_pio_pulldown(unsigned port, unsigned pin, int is_on);
+int at91_pio3_set_pio_disable_schmitt_trig(unsigned port, unsigned pin);
#endif
#endif
* Other misc defines
*/
#define ATMEL_PIO_PORTS 4
-#define CPU_HAS_PIO3
-#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */
#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
#define ATMEL_ID_UHP ATMEL_ID_UHPHS
at91_set_pio_output((x - PIN_BASE) / 32,(x % 32), y)
#define at91_set_gpio_input(x, y) \
at91_set_pio_input((x - PIN_BASE) / 32,(x % 32), y)
-#define at91_set_gpio_value(x, y) \
- at91_set_pio_value((x - PIN_BASE) / 32,(x % 32), y)
-#define at91_get_gpio_value(x) \
- at91_get_pio_value((x - PIN_BASE) / 32,(x % 32))
-#else
-#define at91_set_gpio_value(x, y) at91_set_pio_value(x, y)
-#define at91_get_gpio_value(x) at91_get_pio_value(x)
#endif
+#define at91_set_gpio_value(x, y) \
+ at91_set_pio_value((x / 32), (x % 32), y)
+#define at91_get_gpio_value(x) \
+ at91_get_pio_value((x / 32), (x % 32))
+
#define GPIO_PIOA_BASE (0)
#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
* Other misc defines
*/
#define ATMEL_PIO_PORTS 5
-#define CPU_HAS_PIO3
-#define PIO_SCDR_DIV 0x3fff
#define CPU_HAS_PCR
/* Timer */
* Other misc defines
*/
#define ATMEL_PIO_PORTS 5
-#define CPU_HAS_PIO3
-#define PIO_SCDR_DIV 0x3fff
#define CPU_HAS_PCR
#define CPU_HAS_H32MXDIV
#if defined(CONFIG_SYS_USE_MMC)
if (dev == ATMEL_SAMA5_BOOT_FROM_MCI) {
+#if defined(CONFIG_SPL_OF_CONTROL)
+ return BOOT_DEVICE_MMC1;
+#else
if (off == 0)
return BOOT_DEVICE_MMC1;
if (off == 1)
return BOOT_DEVICE_MMC2;
printf("ERROR: MMC controller %i not present!\n", dev);
hang();
+#endif
}
#endif
return BOOT_DEVICE_SPI;
#endif
+ if (dev == ATMEL_SAMA5_BOOT_FROM_SMC)
+ return BOOT_DEVICE_NAND;
+
if (dev == ATMEL_SAMA5_BOOT_FROM_SAMBA)
return BOOT_DEVICE_USB;
void board_init_f(ulong dummy)
{
+ int ret;
+
switch_to_main_crystal_osc();
#ifdef CONFIG_SAMA5D2
board_early_init_f();
+ mem_init();
+
+ ret = spl_init();
+ if (ret) {
+ debug("spl_init() failed: %d\n", ret);
+ hang();
+ }
+
preloader_console_init();
- mem_init();
}
#include <common.h>
#include <linux/errno.h>
#include "crypto.h"
-#include "aes.h"
+#include "uboot_aes.h"
static u8 zero_key[16];
DECLARE_GLOBAL_DATA_PTR;
-int initdram(void)
+int dram_init(void)
{
ddr_tap_tuning();
gd->ram_size = get_ram_size((void *)KSEG1, SZ_256M);
}
/* initialize the DDR2 Controller and DDR2 PHY */
-int initdram(void)
+int dram_init(void)
{
ddr2_pmd_ungate();
ddr2_phy_init();
#ifndef __MICROCHIP_PIC32_DDR_H
#define __MICROCHIP_PIC32_DDR_H
-/* called by initdram() function */
+/* called by dram_init() function */
void ddr2_phy_init(void);
void ddr2_ctrl_init(void);
phys_size_t ddr2_calculate_size(void);
.ops = &altera_nios2_ops,
.flags = DM_FLAG_PRE_RELOC,
};
+
+/* This is a dummy function on nios2 */
+int dram_init(void)
+{
+ return 0;
+}
/*
* On MPC5200, the initial RAM (and gd) is located in the internal
* SRAM. So we can actually call the preloader console init code
- * before calling initdram(). This makes serial output (printf)
+ * before calling dram_init(). This makes serial output (printf)
* available very early, even before SDRAM init, which has been
* an U-Boot priciple from day 1.
*/
* First we need to initialize the SDRAM, so that the real
* U-Boot or the OS (Linux) can be loaded
*/
- initdram();
+ dram_init();
/* Clear bss */
memset(__bss_start, '\0', __bss_end - __bss_start);
#ifndef CONFIG_FSL_CORENET
#if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \
!defined(CONFIG_SYS_INIT_L2_ADDR)
-int initdram(void)
+int dram_init(void)
{
#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD) || \
defined(CONFIG_ARCH_QEMU_E500)
return 0;
}
#else /* CONFIG_SYS_RAMBOOT */
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size = 0;
}
/*-----------------------------------------------------------------------------+
- * initdram. Initializes the 440SP Memory Queue and DDR SDRAM controller.
+ * dram_init. Initializes the 440SP Memory Queue and DDR SDRAM controller.
* Note: This routine runs from flash with a stack set up in the chip's
* sram space. It is important that the routine does not require .sbss, .bss or
* .data sections. It also cannot call routines that require these sections.
*-----------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------
- * Function: initdram
+ * Function: dram_init
* Description: Configures SDRAM memory banks for DDR operation.
* Auto Memory Configuration option reads the DDR SDRAM EEPROMs
* via the IIC bus and then configures the DDR SDRAM memory
* banks appropriately. If Auto Memory Configuration is
* not used, it is assumed that no DIMM is plugged
*-----------------------------------------------------------------------------*/
-int initdram(void)
+int dram_init(void)
{
unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE};
#else /* CONFIG_SPD_EEPROM */
/*-----------------------------------------------------------------------------
- * Function: initdram
+ * Function: dram_init
* Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller.
* The configuration is performed using static, compile-
* time parameters.
* Configures the PPC405EX(r) and PPC460EX/GT
*---------------------------------------------------------------------------*/
-int initdram(void)
+int dram_init(void)
{
unsigned long val;
}
/*-----------------------------------------------------------------------------+
- * initdram. Initializes the 440EPx/GPx DDR SDRAM controller.
+ * dram_init. Initializes the 440EPx/GPx DDR SDRAM controller.
* Note: This routine runs from flash with a stack set up in the chip's
* sram space. It is important that the routine does not require .sbss, .bss or
* .data sections. It also cannot call routines that require these sections.
*-----------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------
- * Function: initdram
+ * Function: dram_init
* Description: Configures SDRAM memory banks for DDR operation.
* Auto Memory Configuration option reads the DDR SDRAM EEPROMs
* via the IIC bus and then configures the DDR SDRAM memory
* banks appropriately. If Auto Memory Configuration is
* not used, it is assumed that no DIMM is plugged
*-----------------------------------------------------------------------------*/
-int initdram(void)
+int dram_init(void)
{
unsigned char const iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
unsigned long dimm_ranks[MAXDIMMS];
unsigned long cas_latency = 0; /* to quiet initialization warning */
unsigned long dram_size;
- debug("\nEntering initdram()\n");
+ debug("\nEntering dram_init()\n");
/*------------------------------------------------------------------
* Stop the DDR-SDRAM controller.
/*
* Autodetect onboard SDRAM on 405 platforms
*/
-int initdram(void)
+int dram_init(void)
{
ulong speed;
ulong sdtr1;
* so this should be extended for other future boards
* using this routine!
*/
-int initdram(void)
+int dram_init(void)
{
int i;
int tr1_bank1;
* First we need to initialize the SDRAM, so that the real
* U-Boot or the OS (Linux) can be loaded
*/
- initdram();
+ dram_init();
/* Clear bss */
memset(__bss_start, '\0', __bss_end - __bss_start);
typedef __UINT64_TYPE__ u64;
#endif
-#define BITS_PER_LONG CONFIG_SANDBOX_BITS_PER_LONG
+/*
+ * Number of bits in a C 'long' on this architecture. Set this to 32 when
+ * building on a 32-bit machine.
+ */
+#define BITS_PER_LONG 32
typedef unsigned long dma_addr_t;
typedef u32 phys_addr_t;
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
return 0;
}
+
+int dram_init(void)
+{
+ return 0;
+}
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
- initdram();
+ dram_init();
#ifdef CONFIG_SPL_NAND_BOOT
puts("Tertiary program loader running in sram...");
#else
return 0;
}
-int initdram(void)
+int dram_init(void)
{
int size, i;
#endif
/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
+ * ATTENTION: Although partially referenced dram_init does NOT make real use
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if
* CONFIG_SYS_SDRAM_BASE is something else than 0x00000000.
*/
-int initdram(void)
+int dram_init(void)
{
ulong dramsize = 0;
ulong dramsize2 = 0;
#endif
/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
+ * ATTENTION: Although partially referenced dram_init does NOT make real use
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
-int initdram(void)
+int dram_init(void)
{
ulong dramsize = 0;
uint svr, pvr;
/* Reset AR8033 PHY */
gpio_direction_output(IMX_GPIO_NR(1, 28), 0);
- udelay(500);
+ mdelay(10);
gpio_set_value(IMX_GPIO_NR(1, 28), 1);
+ mdelay(1);
}
static iomux_v3_cfg_t const usdhc2_pads[] = {
/* set debug port address: SerDes Test and System Mode Control */
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
/* enable rgmii tx clock delay */
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+ /* set the reserved bits to avoid board specific voltage peak issue*/
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3D47);
return 0;
}
};
#endif
+void pmic_init(void)
+{
+
+#define DA9063_ADDR 0x58
+#define BCORE2_CONF 0x9D
+#define BCORE1_CONF 0x9E
+#define BPRO_CONF 0x9F
+#define BIO_CONF 0xA0
+#define BMEM_CONF 0xA1
+#define BPERI_CONF 0xA2
+#define MODE_BIT_H 7
+#define MODE_BIT_L 6
+
+ uchar val;
+ i2c_set_bus_num(2);
+
+ i2c_read(DA9063_ADDR, BCORE2_CONF, 1, &val, 1);
+ val |= (1 << MODE_BIT_H);
+ val &= ~(1 << MODE_BIT_L);
+ i2c_write(DA9063_ADDR, BCORE2_CONF , 1, &val, 1);
+
+ i2c_read(DA9063_ADDR, BCORE1_CONF, 1, &val, 1);
+ val |= (1 << MODE_BIT_H);
+ val &= ~(1 << MODE_BIT_L);
+ i2c_write(DA9063_ADDR, BCORE1_CONF , 1, &val, 1);
+
+ i2c_read(DA9063_ADDR, BPRO_CONF, 1, &val, 1);
+ val |= (1 << MODE_BIT_H);
+ val &= ~(1 << MODE_BIT_L);
+ i2c_write(DA9063_ADDR, BPRO_CONF , 1, &val, 1);
+
+ i2c_read(DA9063_ADDR, BIO_CONF, 1, &val, 1);
+ val |= (1 << MODE_BIT_H);
+ val &= ~(1 << MODE_BIT_L);
+ i2c_write(DA9063_ADDR, BIO_CONF , 1, &val, 1);
+
+ i2c_read(DA9063_ADDR, BMEM_CONF, 1, &val, 1);
+ val |= (1 << MODE_BIT_H);
+ val &= ~(1 << MODE_BIT_L);
+ i2c_write(DA9063_ADDR, BMEM_CONF , 1, &val, 1);
+
+ i2c_read(DA9063_ADDR, BPERI_CONF, 1, &val, 1);
+ val |= (1 << MODE_BIT_H);
+ val &= ~(1 << MODE_BIT_L);
+ i2c_write(DA9063_ADDR, BPERI_CONF , 1, &val, 1);
+
+}
+
int board_late_init(void)
{
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
+
+#if defined(CONFIG_VIDEO_IPUV3)
/*
* We need at least 200ms between power on and backlight on
* as per specifications from CHI MEI
gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
pwm_enable(0);
+#endif
#ifdef CONFIG_CMD_SATA
setup_ba16_sata();
#endif
+ /* board specific pmic init */
+ pmic_init();
+
return 0;
}
return;
}
-int initdram(void)
+int dram_init(void)
{
int i;
u32 val;
}
-int initdram(void)
+int dram_init(void)
{
gd->ram_size = spd_sdram();
}
/* -------------------------------------------------------------------------
- initdram() reads EEPROM via I2c. EEPROM contains all of
+ dram_init() reads EEPROM via I2c. EEPROM contains all of
the necessary info for SDRAM controller configuration
------------------------------------------------------------------------- */
-int initdram(void)
+int dram_init(void)
{
gd->ram_size = spd_sdram();
/*************************************************************************
*
- * initdram -- 440EPx's DDR controller is a DENALI Core
+ * dram_init -- 440EPx's DDR controller is a DENALI Core
*
************************************************************************/
-int initdram(void)
+int dram_init(void)
{
#if !defined(CONFIG_SYS_RAMBOOT)
ulong speed = get_bus_freq(0);
}
/*
- * initdram() reads EEPROM via I2c. EEPROM contains all of
+ * dram_init() reads EEPROM via I2c. EEPROM contains all of
* the necessary info for SDRAM controller configuration
*/
-int initdram(void)
+int dram_init(void)
{
gd->ram_size = spd_sdram();
}
/*************************************************************************
- * initdram -- doesn't use serial presence detect.
+ * dram_init -- doesn't use serial presence detect.
*
* Assumes: 256 MB, ECC, non-registered
* PLB @ 133 MHz
*tr1_value = (first_good + last_bad) / 2;
}
-int initdram(void)
+int dram_init(void)
{
register uint reg;
int tr1_bank1, tr1_bank2;
--- /dev/null
+if TARGET_M28EVK
+
+config SYS_BOARD
+ default "m28evk"
+
+config SYS_VENDOR
+ default "aries"
+
+config SYS_SOC
+ default "mxs"
+
+config SYS_CONFIG_NAME
+ default "m28evk"
+
+endif
--- /dev/null
+M28EVK BOARD
+M: Marek Vasut <marek.vasut@gmail.com>
+S: Maintained
+F: board/aries/m28evk/
+F: include/configs/m28evk.h
+F: configs/m28evk_defconfig
--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+ifndef CONFIG_SPL_BUILD
+obj-y := m28evk.o
+else
+obj-y := spl_boot.o
+endif
--- /dev/null
+Aries M28EVK
+============
+
+Files of the M28/M28EVK port
+----------------------------
+
+arch/arm/cpu/arm926ejs/mxs/ - The CPU support code for the Freescale i.MX28
+arch/arm/include/asm/arch-mxs/ - Header files for the Freescale i.MX28
+board/aries/m28evk/ - M28EVK board specific files
+include/configs/m28evk.h - M28EVK configuration file
+
+Follow the instructions from doc/README.mxs to generate a bootable SD card or to
+boot from NAND flash.
--- /dev/null
+/*
+ * Aries M28 module
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/mii.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Functions
+ */
+int board_early_init_f(void)
+{
+ /* IO0 clock at 480MHz */
+ mxs_set_ioclk(MXC_IOCLK0, 480000);
+ /* IO1 clock at 480MHz */
+ mxs_set_ioclk(MXC_IOCLK1, 480000);
+
+ /* SSP0 clock at 96MHz */
+ mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
+ /* SSP2 clock at 160MHz */
+ mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
+
+#ifdef CONFIG_CMD_USB
+ mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
+ mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 |
+ MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
+ gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0);
+
+ mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 |
+ MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
+ gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0);
+#endif
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ return mxs_dram_init();
+}
+
+#ifdef CONFIG_CMD_MMC
+static int m28_mmc_wp(int id)
+{
+ if (id != 0) {
+ printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
+ return 1;
+ }
+
+ return gpio_get_value(MX28_PAD_AUART2_CTS__GPIO_3_10);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ /* Configure WP as input. */
+ gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10);
+ /* Turn on the power to the card. */
+ gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
+
+ return mxsmmc_initialize(bis, 0, m28_mmc_wp, NULL);
+}
+#endif
+
+#ifdef CONFIG_CMD_NET
+
+#define MII_OPMODE_STRAP_OVERRIDE 0x16
+#define MII_PHY_CTRL1 0x1e
+#define MII_PHY_CTRL2 0x1f
+
+int fecmxc_mii_postcall(int phy)
+{
+#if defined(CONFIG_ARIES_M28_V11) || defined(CONFIG_ARIES_M28_V10)
+ /* KZ8031 PHY on old boards. */
+ const uint32_t freq = 0x0080;
+#else
+ /* KZ8021 PHY on new boards. */
+ const uint32_t freq = 0x0000;
+#endif
+
+ miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
+ miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
+ if (phy == 3)
+ miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8100 | freq);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct eth_device *dev;
+ int ret;
+
+ ret = cpu_eth_init(bis);
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
+ CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
+ CLKCTRL_ENET_TIME_SEL_RMII_CLK);
+
+#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10)
+ /* Reset the new PHY */
+ gpio_direction_output(MX28_PAD_AUART2_RTS__GPIO_3_11, 0);
+ udelay(10000);
+ gpio_set_value(MX28_PAD_AUART2_RTS__GPIO_3_11, 1);
+ udelay(10000);
+#endif
+
+ ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
+ if (ret) {
+ printf("FEC MXS: Unable to init FEC0\n");
+ return ret;
+ }
+
+ ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
+ if (ret) {
+ printf("FEC MXS: Unable to init FEC1\n");
+ return ret;
+ }
+
+ dev = eth_get_dev_by_name("FEC0");
+ if (!dev) {
+ printf("FEC MXS: Unable to get FEC0 device entry\n");
+ return -EINVAL;
+ }
+
+ ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+ if (ret) {
+ printf("FEC MXS: Unable to register FEC0 mii postcall\n");
+ return ret;
+ }
+
+ dev = eth_get_dev_by_name("FEC1");
+ if (!dev) {
+ printf("FEC MXS: Unable to get FEC1 device entry\n");
+ return -EINVAL;
+ }
+
+ ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+ if (ret) {
+ printf("FEC MXS: Unable to register FEC1 mii postcall\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * ARIES M28 Boot setup
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+#define MUX_CONFIG_LED (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+#define MUX_CONFIG_TSC (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_GPMI (MXS_PAD_1V8 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
+
+const iomux_cfg_t iomux_setup[] = {
+ /* LED */
+ MX28_PAD_ENET0_RXD3__GPIO_4_10 | MUX_CONFIG_LED,
+
+ /* framebuffer */
+ MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
+
+ /* UART1 */
+#ifdef CONFIG_ARIES_M28_V10
+ MX28_PAD_AUART0_CTS__DUART_RX,
+ MX28_PAD_AUART0_RTS__DUART_TX,
+#else
+ MX28_PAD_PWM0__DUART_RX,
+ MX28_PAD_PWM1__DUART_TX,
+#endif
+ MX28_PAD_AUART0_TX__DUART_RTS,
+ MX28_PAD_AUART0_RX__DUART_CTS,
+
+ /* UART2 */
+ MX28_PAD_AUART1_RX__AUART1_RX,
+ MX28_PAD_AUART1_TX__AUART1_TX,
+ MX28_PAD_AUART1_RTS__AUART1_RTS,
+ MX28_PAD_AUART1_CTS__AUART1_CTS,
+
+ /* CAN */
+ MX28_PAD_GPMI_RDY2__CAN0_TX,
+ MX28_PAD_GPMI_RDY3__CAN0_RX,
+
+ /* TSC2007 */
+ MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MUX_CONFIG_TSC,
+
+ /* MMC0 */
+ MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
+ MX28_PAD_SSP0_SCK__SSP0_SCK |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
+ MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0 |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), /* Power */
+ MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP */
+
+ /* GPMI NAND */
+ MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RDN__GPMI_RDN |
+ (MXS_PAD_1V8 | MXS_PAD_8MA | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
+
+ /* FEC Ethernet */
+ MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
+
+ MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
+#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10)
+ MX28_PAD_AUART2_RTS__GPIO_3_11, /* PHY reset */
+#endif
+
+ /* I2C */
+ MX28_PAD_I2C0_SCL__I2C0_SCL,
+ MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+ /* EMI */
+ MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
+
+ MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
+
+ /* SPI2 (for flash) */
+ MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
+ MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
+ MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
+ MX28_PAD_SSP2_SS0__SSP2_D3 |
+ (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
+};
+
+void board_init_ll(const uint32_t arg, const uint32_t *resptr)
+{
+ mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
+}
--- /dev/null
+if TARGET_M53EVK
+
+config SYS_BOARD
+ default "m53evk"
+
+config SYS_VENDOR
+ default "aries"
+
+config SYS_SOC
+ default "mx5"
+
+config SYS_CONFIG_NAME
+ default "m53evk"
+
+endif
--- /dev/null
+M53EVK BOARD
+M: Marek Vasut <marek.vasut@gmail.com>
+S: Maintained
+F: board/aries/m53evk/
+F: include/configs/m53evk.h
+F: configs/m53evk_defconfig
--- /dev/null
+#
+# Aries M53EVK
+# Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := m53evk.o
--- /dev/null
+/*
+ * Aries M53 DRAM init values
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+#include <asm/imx-common/imximage.cfg>
+
+/* image version */
+IMAGE_VERSION 2
+
+
+/* Boot Offset 0x400, valid for both SD and NAND boot. */
+BOOT_OFFSET FLASH_OFFSET_STANDARD
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+DATA 4 0x53fa86f4 0x00000000 /* GRP_DDRMODE_CTL */
+DATA 4 0x53fa8714 0x00000000 /* GRP_DDRMODE */
+DATA 4 0x53fa86fc 0x00000000 /* GRP_DDRPKE */
+DATA 4 0x53fa8724 0x04000000 /* GRP_DDR_TYPE */
+
+DATA 4 0x53fa872c 0x00300000 /* GRP_B3DS */
+DATA 4 0x53fa8554 0x00300000 /* DRAM_DQM3 */
+DATA 4 0x53fa8558 0x00300040 /* DRAM_SDQS3 */
+
+DATA 4 0x53fa8728 0x00300000 /* GRP_B2DS */
+DATA 4 0x53fa8560 0x00300000 /* DRAM_DQM2 */
+DATA 4 0x53fa8568 0x00300040 /* DRAM_SDQS2 */
+
+DATA 4 0x53fa871c 0x00300000 /* GRP_B1DS */
+DATA 4 0x53fa8594 0x00300000 /* DRAM_DQM1 */
+DATA 4 0x53fa8590 0x00300040 /* DRAM_SDQS1 */
+
+DATA 4 0x53fa8718 0x00300000 /* GRP_B0DS */
+DATA 4 0x53fa8584 0x00300000 /* DRAM_DQM0 */
+DATA 4 0x53fa857c 0x00300040 /* DRAM_SDQS0 */
+
+DATA 4 0x53fa8578 0x00300000 /* DRAM_SDCLK_0 */
+DATA 4 0x53fa8570 0x00300000 /* DRAM_SDCLK_1 */
+
+DATA 4 0x53fa8574 0x00300000 /* DRAM_CAS */
+DATA 4 0x53fa8588 0x00300000 /* DRAM_RAS */
+DATA 4 0x53fa86f0 0x00300000 /* GRP_ADDDS */
+DATA 4 0x53fa8720 0x00300000 /* GRP_CTLDS */
+
+DATA 4 0x53fa8564 0x00300040 /* DRAM_SDODT1 */
+DATA 4 0x53fa8580 0x00300040 /* DRAM_SDODT0 */
+
+/* ESDCTL */
+DATA 4 0x63fd9088 0x32383535
+DATA 4 0x63fd9090 0x40383538
+DATA 4 0x63fd907c 0x0136014d
+DATA 4 0x63fd9080 0x01510141
+
+DATA 4 0x63fd9018 0x00011740
+DATA 4 0x63fd9000 0xc3190000
+DATA 4 0x63fd900c 0x555952e3
+DATA 4 0x63fd9010 0xb68e8b63
+DATA 4 0x63fd9014 0x01ff00db
+DATA 4 0x63fd902c 0x000026d2
+DATA 4 0x63fd9030 0x009f0e21
+DATA 4 0x63fd9008 0x12273030
+DATA 4 0x63fd9004 0x0002002d
+DATA 4 0x63fd901c 0x00008032
+DATA 4 0x63fd901c 0x00008033
+DATA 4 0x63fd901c 0x00028031
+DATA 4 0x63fd901c 0x092080b0
+DATA 4 0x63fd901c 0x04008040
+DATA 4 0x63fd901c 0x0000803a
+DATA 4 0x63fd901c 0x0000803b
+DATA 4 0x63fd901c 0x00028039
+DATA 4 0x63fd901c 0x09208138
+DATA 4 0x63fd901c 0x04008048
+DATA 4 0x63fd9020 0x00001800
+DATA 4 0x63fd9040 0x04b80003
+DATA 4 0x63fd9058 0x00022227
+DATA 4 0x63fd901c 0x00000000
--- /dev/null
+/*
+ * Aries M53 module
+ *
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux-mx53.h>
+#include <asm/imx-common/mx5_video.h>
+#include <asm/spl.h>
+#include <linux/errno.h>
+#include <netdev.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <spl.h>
+#include <fsl_esdhc.h>
+#include <asm/gpio.h>
+#include <usb/ehci-ci.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+/* Special MXCFB sync flags are here. */
+#include "../drivers/video/mxcfb.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static uint32_t mx53_dram_size[2];
+
+phys_size_t get_effective_memsize(void)
+{
+ /*
+ * WARNING: We must override get_effective_memsize() function here
+ * to report only the size of the first DRAM bank. This is to make
+ * U-Boot relocator place U-Boot into valid memory, that is, at the
+ * end of the first DRAM bank. If we did not override this function
+ * like so, U-Boot would be placed at the address of the first DRAM
+ * bank + total DRAM size - sizeof(uboot), which in the setup where
+ * each DRAM bank contains 512MiB of DRAM would result in placing
+ * U-Boot into invalid memory area close to the end of the first
+ * DRAM bank.
+ */
+ return mx53_dram_size[0];
+}
+
+int dram_init(void)
+{
+ mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+ mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+ gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = mx53_dram_size[0];
+
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = mx53_dram_size[1];
+
+ return 0;
+}
+
+static void setup_iomux_uart(void)
+{
+ static const iomux_v3_cfg_t uart_pads[] = {
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+}
+
+#ifdef CONFIG_USB_EHCI_MX5
+int board_ehci_hcd_init(int port)
+{
+ if (port == 0) {
+ /* USB OTG PWRON */
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
+ gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
+
+ /* USB OTG Over Current */
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
+ } else if (port == 1) {
+ /* USB Host PWRON */
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
+ gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
+
+ /* USB Host Over Current */
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
+ }
+
+ return 0;
+}
+#endif
+
+static void setup_iomux_fec(void)
+{
+ static const iomux_v3_cfg_t fec_pads[] = {
+ /* MDIO pads */
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
+
+ /* FEC 0 pads */
+ NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
+
+ /* FEC 1 pads */
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg = {
+ MMC_SDHC1_BASE_ADDR,
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
+ gpio_direction_input(IMX_GPIO_NR(1, 1));
+
+ return !gpio_get_value(IMX_GPIO_NR(1, 1));
+}
+
+#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
+#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_DSE_HIGH)
+
+int board_mmc_init(bd_t *bis)
+{
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
+ MX53_PAD_EIM_DA13__GPIO3_13,
+
+ MX53_PAD_EIM_EB3__GPIO2_31, /* SD power */
+ };
+
+ esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+ imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
+
+ /* GPIO 2_31 is SD power */
+ gpio_direction_output(IMX_GPIO_NR(2, 31), 0);
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg);
+}
+#endif
+
+#ifdef CONFIG_VIDEO
+static struct fb_videomode const ampire_wvga = {
+ .name = "Ampire",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 29851, /* picosecond (33.5 MHz) */
+ .left_margin = 89,
+ .right_margin = 164,
+ .upper_margin = 23,
+ .lower_margin = 10,
+ .hsync_len = 10,
+ .vsync_len = 10,
+ .sync = FB_SYNC_CLK_LAT_FALL,
+};
+
+int board_video_skip(void)
+{
+ int ret;
+ ret = ipuv3_fb_init(&ire_wvga, 1, IPU_PIX_FMT_RGB666);
+ if (ret)
+ printf("Ampire LCD cannot be configured: %d\n", ret);
+ return ret;
+}
+#endif
+
+#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+static void setup_iomux_i2c(void)
+{
+ static const iomux_v3_cfg_t i2c_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
+}
+
+static void setup_iomux_video(void)
+{
+ static const iomux_v3_cfg_t lcd_pads[] = {
+ MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0,
+ MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1,
+ MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2,
+ MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3,
+ MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4,
+ MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5,
+ MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6,
+ MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7,
+ MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8,
+ MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9,
+ MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10,
+ MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11,
+ MX53_PAD_EIM_A17__IPU_DISP1_DAT_12,
+ MX53_PAD_EIM_A18__IPU_DISP1_DAT_13,
+ MX53_PAD_EIM_A19__IPU_DISP1_DAT_14,
+ MX53_PAD_EIM_A20__IPU_DISP1_DAT_15,
+ MX53_PAD_EIM_A21__IPU_DISP1_DAT_16,
+ MX53_PAD_EIM_A22__IPU_DISP1_DAT_17,
+ MX53_PAD_EIM_A23__IPU_DISP1_DAT_18,
+ MX53_PAD_EIM_A24__IPU_DISP1_DAT_19,
+ MX53_PAD_EIM_D31__IPU_DISP1_DAT_20,
+ MX53_PAD_EIM_D30__IPU_DISP1_DAT_21,
+ MX53_PAD_EIM_D26__IPU_DISP1_DAT_22,
+ MX53_PAD_EIM_D27__IPU_DISP1_DAT_23,
+ MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK,
+ MX53_PAD_EIM_DA13__IPU_DI1_D0_CS,
+ MX53_PAD_EIM_DA14__IPU_DI1_D1_CS,
+ MX53_PAD_EIM_DA15__IPU_DI1_PIN1,
+ MX53_PAD_EIM_DA11__IPU_DI1_PIN2,
+ MX53_PAD_EIM_DA12__IPU_DI1_PIN3,
+ MX53_PAD_EIM_A25__IPU_DI1_PIN12,
+ MX53_PAD_EIM_DA10__IPU_DI1_PIN15,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+}
+
+static void setup_iomux_nand(void)
+{
+ static const iomux_v3_cfg_t nand_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
+ PAD_CTL_PUS_100K_UP),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
+ PAD_CTL_PUS_100K_UP),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+}
+
+static void m53_set_clock(void)
+{
+ int ret;
+ const uint32_t ref_clk = MXC_HCLK;
+ const uint32_t dramclk = 400;
+ uint32_t cpuclk;
+
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
+ gpio_direction_input(IMX_GPIO_NR(4, 0));
+
+ /* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
+ cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800;
+
+ ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
+ if (ret)
+ printf("CPU: Switch CPU clock to %dMHz failed\n", cpuclk);
+
+ ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
+ if (ret) {
+ printf("CPU: Switch peripheral clock to %dMHz failed\n",
+ dramclk);
+ }
+
+ ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
+ if (ret)
+ printf("CPU: Switch DDR clock to %dMHz failed\n", dramclk);
+}
+
+static void m53_set_nand(void)
+{
+ u32 i;
+
+ /* NAND flash is muxed on ATA pins */
+ setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
+
+ /* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
+ for (i = 0x4; i < 0x94; i += 0x18) {
+ clrbits_le32(WEIM_BASE_ADDR + i,
+ WEIM_GCR2_MUX16_BYP_GRANT_MASK);
+ }
+
+ mxc_set_clock(0, 33, MXC_NFC_CLK);
+ enable_nfc_clk(1);
+}
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+ setup_iomux_fec();
+ setup_iomux_i2c();
+ setup_iomux_nand();
+ setup_iomux_video();
+
+ m53_set_clock();
+
+ mxc_set_sata_internal_clock();
+
+ /* NAND clock @ 33MHz */
+ m53_set_nand();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: Aries M53EVK\n");
+
+ return 0;
+}
+
+/*
+ * NAND SPL
+ */
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+ setup_iomux_nand();
+ m53_set_clock();
+ m53_set_nand();
+}
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_NAND;
+}
+#endif
return 0;
}
-int initdram(void)
+int dram_init(void)
{
#if !defined(CONFIG_MONITOR_IS_IN_RAM)
sdram_t *sdp = (sdram_t *)(MMAP_SDRAM);
/* Configure ENABLE pin for NandFlash */
at91_set_pio_output(AT91_PIO_PORTD, 4, 1);
- at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
- at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
- at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* ALE */
- at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* CLE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 1); /* ALE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 1); /* CLE */
}
#endif
&smc->cs[2].mode);
/* Configure NCS2 PIN */
- at91_set_b_periph(AT91_PIO_PORTD, 19, 0);
+ at91_pio3_set_b_periph(AT91_PIO_PORTD, 19, 0);
}
#endif
/* Enable NandFlash */
at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
- at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
- at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
- at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* NAND ALE */
- at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* NAND CLE */
- at91_set_a_periph(AT91_PIO_PORTD, 6, 1);
- at91_set_a_periph(AT91_PIO_PORTD, 7, 1);
- at91_set_a_periph(AT91_PIO_PORTD, 8, 1);
- at91_set_a_periph(AT91_PIO_PORTD, 9, 1);
- at91_set_a_periph(AT91_PIO_PORTD, 10, 1);
- at91_set_a_periph(AT91_PIO_PORTD, 11, 1);
- at91_set_a_periph(AT91_PIO_PORTD, 12, 1);
- at91_set_a_periph(AT91_PIO_PORTD, 13, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 1); /* NAND ALE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 1); /* NAND CLE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1);
}
#endif
void lcd_enable(void)
{
if (has_lcdc())
- at91_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */
}
void lcd_disable(void)
{
if (has_lcdc())
- at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */
}
static void at91sam9x5ek_lcd_hw_init(void)
{
if (has_lcdc()) {
- at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */
- at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */
- at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */
- at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */
- at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
- at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */
-
- at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
- at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
- at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
- at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
- at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
- at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
- at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
- at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
- at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
- at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
- at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
- at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
- at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
- at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
- at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
- at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
- at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
- at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
- at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
- at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
- at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
- at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
- at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
- at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
at91_periph_clk_enable(ATMEL_ID_LCDC);
}
&smc->cs[0].mode);
/* Address pin (A1 ~ A23) configuration */
- at91_set_a_periph(AT91_PIO_PORTE, 1, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 2, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 3, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 4, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 5, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 6, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 7, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 8, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 9, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 10, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 11, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 12, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 13, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 14, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 15, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 16, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 17, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 18, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 19, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 20, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 21, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 22, 0);
- at91_set_a_periph(AT91_PIO_PORTE, 23, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 1, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 2, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 3, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 4, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 5, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 6, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 7, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 8, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 9, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 10, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 11, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 12, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 13, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 14, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 15, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 16, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 17, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 18, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 19, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 20, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 21, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 22, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 23, 0);
/* CS0 pin configuration */
- at91_set_a_periph(AT91_PIO_PORTE, 26, 0);
+ at91_pio3_set_a_periph(AT91_PIO_PORTE, 26, 0);
}
#endif
gd->fb_base = CONFIG_SAMA5D3_LCD_BASE;
/* The higher 8 bit of LCD is board related */
- at91_set_c_periph(AT91_PIO_PORTC, 14, 0); /* LCDD16 */
- at91_set_c_periph(AT91_PIO_PORTC, 13, 0); /* LCDD17 */
- at91_set_c_periph(AT91_PIO_PORTC, 12, 0); /* LCDD18 */
- at91_set_c_periph(AT91_PIO_PORTC, 11, 0); /* LCDD19 */
- at91_set_c_periph(AT91_PIO_PORTC, 10, 0); /* LCDD20 */
- at91_set_c_periph(AT91_PIO_PORTC, 15, 0); /* LCDD21 */
- at91_set_c_periph(AT91_PIO_PORTE, 27, 0); /* LCDD22 */
- at91_set_c_periph(AT91_PIO_PORTE, 28, 0); /* LCDD23 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTC, 14, 0); /* LCDD16 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTC, 13, 0); /* LCDD17 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTC, 12, 0); /* LCDD18 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTC, 11, 0); /* LCDD19 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTC, 10, 0); /* LCDD20 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTC, 15, 0); /* LCDD21 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 27, 0); /* LCDD22 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 28, 0); /* LCDD23 */
/* Configure lower 16 bit of LCD and enable clock */
at91_lcd_hw_init();
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/atmel_mpddrc.h>
-#include <asm/arch/atmel_usba_udc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <asm/arch/sama5d3_smc.h>
#include <asm/arch/sama5d4.h>
#include <atmel_hlcdc.h>
-#include <atmel_mci.h>
+#include <debug_uart.h>
#include <lcd.h>
-#include <mmc.h>
-#include <net.h>
-#include <netdev.h>
#include <nand.h>
-#include <spi.h>
#include <version.h>
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_ATMEL_SPI
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
-}
-
-static void sama5d4_xplained_spi0_hw_init(void)
-{
- at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
-
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_SPI0);
-}
-#endif /* CONFIG_ATMEL_SPI */
-
#ifdef CONFIG_NAND_ATMEL
static void sama5d4_xplained_nand_hw_init(void)
{
AT91_SMC_MODE_TDF_CYCLE(3),
&smc->cs[3].mode);
- at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */
- at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */
- at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */
- at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */
- at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */
- at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */
- at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */
- at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */
- at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */
- at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */
- at91_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */
- at91_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */
- at91_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */
- at91_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */
}
#endif
static void sama5d4_xplained_lcd_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
- at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
- at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
- at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
- at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
- at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
-
- at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
- at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
- at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
- at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
- at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
- at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
- at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
- at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
-
- at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
- at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
- at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
- at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
- at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
- at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
- at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
- at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
-
- at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
- at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
- at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
- at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
- at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
- at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
- at91_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
- at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_LCDC);
#endif /* CONFIG_LCD */
-#ifdef CONFIG_GENERIC_ATMEL_MCI
-void sama5d4_xplained_mci1_hw_init(void)
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+static void sama5d4_xplained_serial3_hw_init(void)
{
- at91_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
- at91_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
- at91_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
- at91_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
- at91_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
- at91_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
-
- /*
- * As the mci io internal pull down is too strong, so if the io needs
- * external pull up, the pull up resistor will be very small, if so
- * the power consumption will increase, so disable the interanl pull
- * down to save the power.
- */
- at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
+ at91_pio3_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */
/* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_MCI1);
-}
-
-int board_mmc_init(bd_t *bis)
-{
- /* Enable the power supply */
- at91_set_pio_output(AT91_PIO_PORTE, 4, 0);
-
- return atmel_mci_init((void *)ATMEL_BASE_MCI1);
+ at91_periph_clk_enable(ATMEL_ID_USART3);
}
-#endif /* CONFIG_GENERIC_ATMEL_MCI */
-#ifdef CONFIG_MACB
-void sama5d4_xplained_macb0_hw_init(void)
+void board_debug_uart_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
- at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
- at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
- at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
- at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
- at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_GMAC0);
+ sama5d4_xplained_serial3_hw_init();
}
#endif
-static void sama5d4_xplained_serial3_hw_init(void)
-{
- at91_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */
- at91_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_USART3);
-}
-
+#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
- at91_periph_clk_enable(ATMEL_ID_PIOA);
- at91_periph_clk_enable(ATMEL_ID_PIOB);
- at91_periph_clk_enable(ATMEL_ID_PIOC);
- at91_periph_clk_enable(ATMEL_ID_PIOD);
- at91_periph_clk_enable(ATMEL_ID_PIOE);
-
- sama5d4_xplained_serial3_hw_init();
-
+#ifdef CONFIG_DEBUG_UART
+ debug_uart_init();
+#endif
return 0;
}
+#endif
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#ifdef CONFIG_ATMEL_SPI
- sama5d4_xplained_spi0_hw_init();
-#endif
#ifdef CONFIG_NAND_ATMEL
sama5d4_xplained_nand_hw_init();
#endif
-#ifdef CONFIG_GENERIC_ATMEL_MCI
- sama5d4_xplained_mci1_hw_init();
-#endif
-#ifdef CONFIG_MACB
- sama5d4_xplained_macb0_hw_init();
-#endif
#ifdef CONFIG_LCD
sama5d4_xplained_lcd_hw_init();
#endif
#ifdef CONFIG_CMD_USB
sama5d4_xplained_usb_hw_init();
#endif
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- at91_udp_hw_init();
-#endif
return 0;
}
return 0;
}
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
-#endif
-
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- usba_udc_probe(&pdata);
-#ifdef CONFIG_USB_ETH_RNDIS
- usb_eth_initialize(bis);
-#endif
-#endif
-
- return rc;
-}
-
/* SPL */
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
-#ifdef CONFIG_SYS_USE_MMC
- sama5d4_xplained_mci1_hw_init();
-#elif CONFIG_SYS_USE_NANDFLASH
+#if CONFIG_SYS_USE_NANDFLASH
sama5d4_xplained_nand_hw_init();
-#elif CONFIG_SYS_USE_SERIALFLASH
- sama5d4_xplained_spi0_hw_init();
#endif
}
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/atmel_mpddrc.h>
-#include <asm/arch/atmel_usba_udc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <asm/arch/sama5d3_smc.h>
#include <asm/arch/sama5d4.h>
#include <atmel_hlcdc.h>
-#include <atmel_mci.h>
+#include <debug_uart.h>
#include <lcd.h>
-#include <mmc.h>
-#include <net.h>
-#include <netdev.h>
#include <nand.h>
-#include <spi.h>
#include <version.h>
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_ATMEL_SPI
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
-}
-
-static void sama5d4ek_spi0_hw_init(void)
-{
- at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
-
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_SPI0);
-}
-#endif /* CONFIG_ATMEL_SPI */
-
#ifdef CONFIG_NAND_ATMEL
static void sama5d4ek_nand_hw_init(void)
{
AT91_SMC_MODE_TDF_CYCLE(3),
&smc->cs[3].mode);
- at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */
- at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */
- at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */
- at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */
- at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */
- at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */
- at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */
- at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */
- at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */
- at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */
- at91_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */
- at91_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */
- at91_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */
- at91_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */
}
#endif
static void sama5d4ek_lcd_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
- at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
- at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
- at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
- at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
- at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
-
- at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
- at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
- at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
- at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
- at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
- at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
-
- at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
- at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
- at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
- at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
- at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
- at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
-
- at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
- at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
- at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
- at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
- at91_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
- at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_LCDC);
#endif /* CONFIG_LCD */
-#ifdef CONFIG_GENERIC_ATMEL_MCI
-void sama5d4ek_mci1_hw_init(void)
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+static void sama5d4ek_serial3_hw_init(void)
{
- at91_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
- at91_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
- at91_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
- at91_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
- at91_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
- at91_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
-
- /*
- * As the mci io internal pull down is too strong, so if the io needs
- * external pull up, the pull up resistor will be very small, if so
- * the power consumption will increase, so disable the interanl pull
- * down to save the power.
- */
- at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
+ at91_pio3_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */
/* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_MCI1);
-}
-
-int board_mmc_init(bd_t *bis)
-{
- /* Enable power for MCI1 interface */
- at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
-
- return atmel_mci_init((void *)ATMEL_BASE_MCI1);
+ at91_periph_clk_enable(ATMEL_ID_USART3);
}
-#endif /* CONFIG_GENERIC_ATMEL_MCI */
-#ifdef CONFIG_MACB
-void sama5d4ek_macb0_hw_init(void)
+void board_debug_uart_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
- at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
- at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
- at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
- at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
- at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_GMAC0);
+ sama5d4ek_serial3_hw_init();
}
#endif
-static void sama5d4ek_serial3_hw_init(void)
-{
- at91_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */
- at91_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_USART3);
-}
-
+#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
- at91_periph_clk_enable(ATMEL_ID_PIOA);
- at91_periph_clk_enable(ATMEL_ID_PIOB);
- at91_periph_clk_enable(ATMEL_ID_PIOC);
- at91_periph_clk_enable(ATMEL_ID_PIOD);
- at91_periph_clk_enable(ATMEL_ID_PIOE);
-
- sama5d4ek_serial3_hw_init();
-
+#ifdef CONFIG_DEBUG_UART
+ debug_uart_init();
+#endif
return 0;
}
+#endif
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#ifdef CONFIG_ATMEL_SPI
- sama5d4ek_spi0_hw_init();
-#endif
#ifdef CONFIG_NAND_ATMEL
sama5d4ek_nand_hw_init();
#endif
-#ifdef CONFIG_GENERIC_ATMEL_MCI
- sama5d4ek_mci1_hw_init();
-#endif
-#ifdef CONFIG_MACB
- sama5d4ek_macb0_hw_init();
-#endif
#ifdef CONFIG_LCD
sama5d4ek_lcd_hw_init();
#endif
#ifdef CONFIG_CMD_USB
sama5d4ek_usb_hw_init();
#endif
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- at91_udp_hw_init();
-#endif
return 0;
}
return 0;
}
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
-#endif
-
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- usba_udc_probe(&pdata);
-#ifdef CONFIG_USB_ETH_RNDIS
- usb_eth_initialize(bis);
-#endif
-#endif
-
- return rc;
-}
-
/* SPL */
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
-#ifdef CONFIG_SYS_USE_MMC
- sama5d4ek_mci1_hw_init();
-#elif CONFIG_SYS_USE_NANDFLASH
+#if CONFIG_SYS_USE_NANDFLASH
sama5d4ek_nand_hw_init();
-#elif CONFIG_SYS_USE_SERIALFLASH
- sama5d4ek_spi0_hw_init();
#endif
}
#endif
/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
+ * ATTENTION: Although partially referenced dram_init does NOT make real use
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
-int initdram(void)
+int dram_init(void)
{
ulong dramsize = 0;
ulong dramsize2 = 0;
/*
* Initalize SDRAM - configure SDRAM controller, detect memory size.
*/
-int initdram(void)
+int dram_init(void)
{
ulong dramsize = 0;
#ifndef CONFIG_SYS_RAMBOOT
return 0;
};
-int initdram(void)
+int dram_init(void)
{
volatile sdramctrl_t *sdp = (sdramctrl_t *) (MMAP_SDRAM);
DECLARE_GLOBAL_DATA_PTR;
-int initdram(void)
+int dram_init(void)
{
gd->ram_size = fixed_sdram(NULL, NULL, 0);
DECLARE_GLOBAL_DATA_PTR;
-int initdram(void)
+int dram_init(void)
{
/* Sdram is setup by assembler code */
/* If memory could be changed, we should return the true value here */
+++ /dev/null
-if TARGET_M28EVK
-
-config SYS_BOARD
- default "m28evk"
-
-config SYS_VENDOR
- default "denx"
-
-config SYS_SOC
- default "mxs"
-
-config SYS_CONFIG_NAME
- default "m28evk"
-
-endif
+++ /dev/null
-M28EVK BOARD
-M: Marek Vasut <marek.vasut@gmail.com>
-S: Maintained
-F: board/denx/m28evk/
-F: include/configs/m28evk.h
-F: configs/m28evk_defconfig
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-ifndef CONFIG_SPL_BUILD
-obj-y := m28evk.o
-else
-obj-y := spl_boot.o
-endif
+++ /dev/null
-DENX M28EVK
-===========
-
-Files of the M28/M28EVK port
-----------------------------
-
-arch/arm/cpu/arm926ejs/mxs/ - The CPU support code for the Freescale i.MX28
-arch/arm/include/asm/arch-mxs/ - Header files for the Freescale i.MX28
-board/denx/m28evk/ - M28EVK board specific files
-include/configs/m28evk.h - M28EVK configuration file
-
-Follow the instructions from doc/README.mxs to generate a bootable SD card or to
-boot from NAND flash.
+++ /dev/null
-/*
- * DENX M28 module
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/mii.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Functions
- */
-int board_early_init_f(void)
-{
- /* IO0 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK0, 480000);
- /* IO1 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK1, 480000);
-
- /* SSP0 clock at 96MHz */
- mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
- /* SSP2 clock at 160MHz */
- mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
-
-#ifdef CONFIG_CMD_USB
- mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
- mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 |
- MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
- gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0);
-
- mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 |
- MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
- gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0);
-#endif
-
- return 0;
-}
-
-int board_init(void)
-{
- /* Adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- return 0;
-}
-
-int dram_init(void)
-{
- return mxs_dram_init();
-}
-
-#ifdef CONFIG_CMD_MMC
-static int m28_mmc_wp(int id)
-{
- if (id != 0) {
- printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
- return 1;
- }
-
- return gpio_get_value(MX28_PAD_AUART2_CTS__GPIO_3_10);
-}
-
-int board_mmc_init(bd_t *bis)
-{
- /* Configure WP as input. */
- gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10);
- /* Turn on the power to the card. */
- gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
-
- return mxsmmc_initialize(bis, 0, m28_mmc_wp, NULL);
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-
-#define MII_OPMODE_STRAP_OVERRIDE 0x16
-#define MII_PHY_CTRL1 0x1e
-#define MII_PHY_CTRL2 0x1f
-
-int fecmxc_mii_postcall(int phy)
-{
-#if defined(CONFIG_DENX_M28_V11) || defined(CONFIG_DENX_M28_V10)
- /* KZ8031 PHY on old boards. */
- const uint32_t freq = 0x0080;
-#else
- /* KZ8021 PHY on new boards. */
- const uint32_t freq = 0x0000;
-#endif
-
- miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
- miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
- if (phy == 3)
- miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8100 | freq);
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- struct mxs_clkctrl_regs *clkctrl_regs =
- (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
- struct eth_device *dev;
- int ret;
-
- ret = cpu_eth_init(bis);
- if (ret)
- return ret;
-
- clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
- CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
- CLKCTRL_ENET_TIME_SEL_RMII_CLK);
-
-#if !defined(CONFIG_DENX_M28_V11) && !defined(CONFIG_DENX_M28_V10)
- /* Reset the new PHY */
- gpio_direction_output(MX28_PAD_AUART2_RTS__GPIO_3_11, 0);
- udelay(10000);
- gpio_set_value(MX28_PAD_AUART2_RTS__GPIO_3_11, 1);
- udelay(10000);
-#endif
-
- ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
- if (ret) {
- printf("FEC MXS: Unable to init FEC0\n");
- return ret;
- }
-
- ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
- if (ret) {
- printf("FEC MXS: Unable to init FEC1\n");
- return ret;
- }
-
- dev = eth_get_dev_by_name("FEC0");
- if (!dev) {
- printf("FEC MXS: Unable to get FEC0 device entry\n");
- return -EINVAL;
- }
-
- ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
- if (ret) {
- printf("FEC MXS: Unable to register FEC0 mii postcall\n");
- return ret;
- }
-
- dev = eth_get_dev_by_name("FEC1");
- if (!dev) {
- printf("FEC MXS: Unable to get FEC1 device entry\n");
- return -EINVAL;
- }
-
- ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
- if (ret) {
- printf("FEC MXS: Unable to register FEC1 mii postcall\n");
- return ret;
- }
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * DENX M28 Boot setup
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-
-#define MUX_CONFIG_LED (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define MUX_CONFIG_TSC (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_GPMI (MXS_PAD_1V8 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
-
-const iomux_cfg_t iomux_setup[] = {
- /* LED */
- MX28_PAD_ENET0_RXD3__GPIO_4_10 | MUX_CONFIG_LED,
-
- /* framebuffer */
- MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MUX_CONFIG_LCD,
- MX28_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
-
- /* UART1 */
-#ifdef CONFIG_DENX_M28_V10
- MX28_PAD_AUART0_CTS__DUART_RX,
- MX28_PAD_AUART0_RTS__DUART_TX,
-#else
- MX28_PAD_PWM0__DUART_RX,
- MX28_PAD_PWM1__DUART_TX,
-#endif
- MX28_PAD_AUART0_TX__DUART_RTS,
- MX28_PAD_AUART0_RX__DUART_CTS,
-
- /* UART2 */
- MX28_PAD_AUART1_RX__AUART1_RX,
- MX28_PAD_AUART1_TX__AUART1_TX,
- MX28_PAD_AUART1_RTS__AUART1_RTS,
- MX28_PAD_AUART1_CTS__AUART1_CTS,
-
- /* CAN */
- MX28_PAD_GPMI_RDY2__CAN0_TX,
- MX28_PAD_GPMI_RDY3__CAN0_RX,
-
- /* TSC2007 */
- MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MUX_CONFIG_TSC,
-
- /* MMC0 */
- MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
- (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
- MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0 |
- (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), /* Power */
- MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP */
-
- /* GPMI NAND */
- MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_RDN__GPMI_RDN |
- (MXS_PAD_1V8 | MXS_PAD_8MA | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
-
- /* FEC Ethernet */
- MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
- MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
-
- MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
-#if !defined(CONFIG_DENX_M28_V11) && !defined(CONFIG_DENX_M28_V10)
- MX28_PAD_AUART2_RTS__GPIO_3_11, /* PHY reset */
-#endif
-
- /* I2C */
- MX28_PAD_I2C0_SCL__I2C0_SCL,
- MX28_PAD_I2C0_SDA__I2C0_SDA,
-
- /* EMI */
- MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
-
- MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
-
- /* SPI2 (for flash) */
- MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
- MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
- MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
- MX28_PAD_SSP2_SS0__SSP2_D3 |
- (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
-};
-
-void board_init_ll(const uint32_t arg, const uint32_t *resptr)
-{
- mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
-}
+++ /dev/null
-if TARGET_M53EVK
-
-config SYS_BOARD
- default "m53evk"
-
-config SYS_VENDOR
- default "denx"
-
-config SYS_SOC
- default "mx5"
-
-config SYS_CONFIG_NAME
- default "m53evk"
-
-endif
+++ /dev/null
-M53EVK BOARD
-M: Marek Vasut <marek.vasut@gmail.com>
-S: Maintained
-F: board/denx/m53evk/
-F: include/configs/m53evk.h
-F: configs/m53evk_defconfig
+++ /dev/null
-#
-# DENX M53EVK
-# Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := m53evk.o
+++ /dev/null
-/*
- * DENX M53 DRAM init values
- * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-#include <asm/imx-common/imximage.cfg>
-
-/* image version */
-IMAGE_VERSION 2
-
-
-/* Boot Offset 0x400, valid for both SD and NAND boot. */
-BOOT_OFFSET FLASH_OFFSET_STANDARD
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type Address Value
- *
- * where:
- * Addr-type register length (1,2 or 4 bytes)
- * Address absolute address of the register
- * value value to be stored in the register
- */
-DATA 4 0x53fa86f4 0x00000000 /* GRP_DDRMODE_CTL */
-DATA 4 0x53fa8714 0x00000000 /* GRP_DDRMODE */
-DATA 4 0x53fa86fc 0x00000000 /* GRP_DDRPKE */
-DATA 4 0x53fa8724 0x04000000 /* GRP_DDR_TYPE */
-
-DATA 4 0x53fa872c 0x00300000 /* GRP_B3DS */
-DATA 4 0x53fa8554 0x00300000 /* DRAM_DQM3 */
-DATA 4 0x53fa8558 0x00300040 /* DRAM_SDQS3 */
-
-DATA 4 0x53fa8728 0x00300000 /* GRP_B2DS */
-DATA 4 0x53fa8560 0x00300000 /* DRAM_DQM2 */
-DATA 4 0x53fa8568 0x00300040 /* DRAM_SDQS2 */
-
-DATA 4 0x53fa871c 0x00300000 /* GRP_B1DS */
-DATA 4 0x53fa8594 0x00300000 /* DRAM_DQM1 */
-DATA 4 0x53fa8590 0x00300040 /* DRAM_SDQS1 */
-
-DATA 4 0x53fa8718 0x00300000 /* GRP_B0DS */
-DATA 4 0x53fa8584 0x00300000 /* DRAM_DQM0 */
-DATA 4 0x53fa857c 0x00300040 /* DRAM_SDQS0 */
-
-DATA 4 0x53fa8578 0x00300000 /* DRAM_SDCLK_0 */
-DATA 4 0x53fa8570 0x00300000 /* DRAM_SDCLK_1 */
-
-DATA 4 0x53fa8574 0x00300000 /* DRAM_CAS */
-DATA 4 0x53fa8588 0x00300000 /* DRAM_RAS */
-DATA 4 0x53fa86f0 0x00300000 /* GRP_ADDDS */
-DATA 4 0x53fa8720 0x00300000 /* GRP_CTLDS */
-
-DATA 4 0x53fa8564 0x00300040 /* DRAM_SDODT1 */
-DATA 4 0x53fa8580 0x00300040 /* DRAM_SDODT0 */
-
-/* ESDCTL */
-DATA 4 0x63fd9088 0x32383535
-DATA 4 0x63fd9090 0x40383538
-DATA 4 0x63fd907c 0x0136014d
-DATA 4 0x63fd9080 0x01510141
-
-DATA 4 0x63fd9018 0x00011740
-DATA 4 0x63fd9000 0xc3190000
-DATA 4 0x63fd900c 0x555952e3
-DATA 4 0x63fd9010 0xb68e8b63
-DATA 4 0x63fd9014 0x01ff00db
-DATA 4 0x63fd902c 0x000026d2
-DATA 4 0x63fd9030 0x009f0e21
-DATA 4 0x63fd9008 0x12273030
-DATA 4 0x63fd9004 0x0002002d
-DATA 4 0x63fd901c 0x00008032
-DATA 4 0x63fd901c 0x00008033
-DATA 4 0x63fd901c 0x00028031
-DATA 4 0x63fd901c 0x092080b0
-DATA 4 0x63fd901c 0x04008040
-DATA 4 0x63fd901c 0x0000803a
-DATA 4 0x63fd901c 0x0000803b
-DATA 4 0x63fd901c 0x00028039
-DATA 4 0x63fd901c 0x09208138
-DATA 4 0x63fd901c 0x04008048
-DATA 4 0x63fd9020 0x00001800
-DATA 4 0x63fd9040 0x04b80003
-DATA 4 0x63fd9058 0x00022227
-DATA 4 0x63fd901c 0x00000000
+++ /dev/null
-/*
- * DENX M53 module
- *
- * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/iomux-mx53.h>
-#include <asm/imx-common/mx5_video.h>
-#include <asm/spl.h>
-#include <linux/errno.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <spl.h>
-#include <fsl_esdhc.h>
-#include <asm/gpio.h>
-#include <usb/ehci-ci.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-/* Special MXCFB sync flags are here. */
-#include "../drivers/video/mxcfb.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static uint32_t mx53_dram_size[2];
-
-phys_size_t get_effective_memsize(void)
-{
- /*
- * WARNING: We must override get_effective_memsize() function here
- * to report only the size of the first DRAM bank. This is to make
- * U-Boot relocator place U-Boot into valid memory, that is, at the
- * end of the first DRAM bank. If we did not override this function
- * like so, U-Boot would be placed at the address of the first DRAM
- * bank + total DRAM size - sizeof(uboot), which in the setup where
- * each DRAM bank contains 512MiB of DRAM would result in placing
- * U-Boot into invalid memory area close to the end of the first
- * DRAM bank.
- */
- return mx53_dram_size[0];
-}
-
-int dram_init(void)
-{
- mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
- mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
-
- gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
-
- return 0;
-}
-
-int dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = mx53_dram_size[0];
-
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = mx53_dram_size[1];
-
- return 0;
-}
-
-static void setup_iomux_uart(void)
-{
- static const iomux_v3_cfg_t uart_pads[] = {
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
- };
-
- imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-}
-
-#ifdef CONFIG_USB_EHCI_MX5
-int board_ehci_hcd_init(int port)
-{
- if (port == 0) {
- /* USB OTG PWRON */
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
- PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
- gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
-
- /* USB OTG Over Current */
- imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
- } else if (port == 1) {
- /* USB Host PWRON */
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
- PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
- gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
-
- /* USB Host Over Current */
- imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
- }
-
- return 0;
-}
-#endif
-
-static void setup_iomux_fec(void)
-{
- static const iomux_v3_cfg_t fec_pads[] = {
- /* MDIO pads */
- NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
- NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
-
- /* FEC 0 pads */
- NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
-
- /* FEC 1 pads */
- NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
- };
-
- imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-}
-
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg = {
- MMC_SDHC1_BASE_ADDR,
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
- gpio_direction_input(IMX_GPIO_NR(1, 1));
-
- return !gpio_get_value(IMX_GPIO_NR(1, 1));
-}
-
-#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP)
-#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
- PAD_CTL_DSE_HIGH)
-
-int board_mmc_init(bd_t *bis)
-{
- static const iomux_v3_cfg_t sd1_pads[] = {
- NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
- MX53_PAD_EIM_DA13__GPIO3_13,
-
- MX53_PAD_EIM_EB3__GPIO2_31, /* SD power */
- };
-
- esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-
- imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
-
- /* GPIO 2_31 is SD power */
- gpio_direction_output(IMX_GPIO_NR(2, 31), 0);
-
- return fsl_esdhc_initialize(bis, &esdhc_cfg);
-}
-#endif
-
-#ifdef CONFIG_VIDEO
-static struct fb_videomode const ampire_wvga = {
- .name = "Ampire",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 29851, /* picosecond (33.5 MHz) */
- .left_margin = 89,
- .right_margin = 164,
- .upper_margin = 23,
- .lower_margin = 10,
- .hsync_len = 10,
- .vsync_len = 10,
- .sync = FB_SYNC_CLK_LAT_FALL,
-};
-
-int board_video_skip(void)
-{
- int ret;
- ret = ipuv3_fb_init(&ire_wvga, 1, IPU_PIX_FMT_RGB666);
- if (ret)
- printf("Ampire LCD cannot be configured: %d\n", ret);
- return ret;
-}
-#endif
-
-#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-static void setup_iomux_i2c(void)
-{
- static const iomux_v3_cfg_t i2c_pads[] = {
- NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL),
- };
-
- imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
-}
-
-static void setup_iomux_video(void)
-{
- static const iomux_v3_cfg_t lcd_pads[] = {
- MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0,
- MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1,
- MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2,
- MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3,
- MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4,
- MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5,
- MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6,
- MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7,
- MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8,
- MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9,
- MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10,
- MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11,
- MX53_PAD_EIM_A17__IPU_DISP1_DAT_12,
- MX53_PAD_EIM_A18__IPU_DISP1_DAT_13,
- MX53_PAD_EIM_A19__IPU_DISP1_DAT_14,
- MX53_PAD_EIM_A20__IPU_DISP1_DAT_15,
- MX53_PAD_EIM_A21__IPU_DISP1_DAT_16,
- MX53_PAD_EIM_A22__IPU_DISP1_DAT_17,
- MX53_PAD_EIM_A23__IPU_DISP1_DAT_18,
- MX53_PAD_EIM_A24__IPU_DISP1_DAT_19,
- MX53_PAD_EIM_D31__IPU_DISP1_DAT_20,
- MX53_PAD_EIM_D30__IPU_DISP1_DAT_21,
- MX53_PAD_EIM_D26__IPU_DISP1_DAT_22,
- MX53_PAD_EIM_D27__IPU_DISP1_DAT_23,
- MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK,
- MX53_PAD_EIM_DA13__IPU_DI1_D0_CS,
- MX53_PAD_EIM_DA14__IPU_DI1_D1_CS,
- MX53_PAD_EIM_DA15__IPU_DI1_PIN1,
- MX53_PAD_EIM_DA11__IPU_DI1_PIN2,
- MX53_PAD_EIM_DA12__IPU_DI1_PIN3,
- MX53_PAD_EIM_A25__IPU_DI1_PIN12,
- MX53_PAD_EIM_DA10__IPU_DI1_PIN15,
- };
-
- imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
-}
-
-static void setup_iomux_nand(void)
-{
- static const iomux_v3_cfg_t nand_pads[] = {
- NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
- PAD_CTL_PUS_100K_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
- PAD_CTL_PUS_100K_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- };
-
- imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
-}
-
-static void m53_set_clock(void)
-{
- int ret;
- const uint32_t ref_clk = MXC_HCLK;
- const uint32_t dramclk = 400;
- uint32_t cpuclk;
-
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
- gpio_direction_input(IMX_GPIO_NR(4, 0));
-
- /* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
- cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800;
-
- ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
- if (ret)
- printf("CPU: Switch CPU clock to %dMHz failed\n", cpuclk);
-
- ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
- if (ret) {
- printf("CPU: Switch peripheral clock to %dMHz failed\n",
- dramclk);
- }
-
- ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
- if (ret)
- printf("CPU: Switch DDR clock to %dMHz failed\n", dramclk);
-}
-
-static void m53_set_nand(void)
-{
- u32 i;
-
- /* NAND flash is muxed on ATA pins */
- setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
-
- /* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
- for (i = 0x4; i < 0x94; i += 0x18) {
- clrbits_le32(WEIM_BASE_ADDR + i,
- WEIM_GCR2_MUX16_BYP_GRANT_MASK);
- }
-
- mxc_set_clock(0, 33, MXC_NFC_CLK);
- enable_nfc_clk(1);
-}
-
-int board_early_init_f(void)
-{
- setup_iomux_uart();
- setup_iomux_fec();
- setup_iomux_i2c();
- setup_iomux_nand();
- setup_iomux_video();
-
- m53_set_clock();
-
- mxc_set_sata_internal_clock();
-
- /* NAND clock @ 33MHz */
- m53_set_nand();
-
- return 0;
-}
-
-int board_init(void)
-{
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- return 0;
-}
-
-int checkboard(void)
-{
- puts("Board: DENX M53EVK\n");
-
- return 0;
-}
-
-/*
- * NAND SPL
- */
-#ifdef CONFIG_SPL_BUILD
-void spl_board_init(void)
-{
- setup_iomux_nand();
- m53_set_clock();
- m53_set_nand();
-}
-
-u32 spl_boot_device(void)
-{
- return BOOT_DEVICE_NAND;
-}
-#endif
static void ma5d4evk_spi0_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
static void ma5d4evk_lcd_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTA, 24, 1); /* LCDPWM */
- at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
- at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
- at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
- at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
- at91_set_a_periph(AT91_PIO_PORTA, 29, 1); /* LCDDEN */
-
- at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
- at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
- at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
- at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
- at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
- at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
- at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
- at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
-
- at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
- at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
- at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
- at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
- at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
- at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
- at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
- at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
-
- at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
- at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
- at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
- at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
- at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
- at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
- at91_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
- at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 1); /* LCDPWM */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 1); /* LCDDEN */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_LCDC);
/* On-SoM eMMC */
void ma5d4evk_mci0_hw_init(void)
{
- at91_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI1 CDA */
- at91_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI1 DA0 */
- at91_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI1 DA1 */
- at91_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI1 DA2 */
- at91_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI1 DA3 */
- at91_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI1 DA4 */
- at91_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI1 DA5 */
- at91_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI1 DA6 */
- at91_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI1 DA7 */
- at91_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI1 CLK */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI1 CDA */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI1 DA0 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI1 DA1 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI1 DA2 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI1 DA3 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI1 DA4 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI1 DA5 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI1 DA6 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI1 DA7 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI1 CLK */
/*
* As the mci io internal pull down is too strong, so if the io needs
* the power consumption will increase, so disable the internal pull
* down to save the power.
*/
- at91_set_pio_pulldown(AT91_PIO_PORTC, 5, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 6, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 7, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 8, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 9, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 10, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 11, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 12, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 13, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 4, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 5, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 6, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 7, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 8, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 9, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 10, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 11, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 12, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 13, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 4, 0);
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_MCI0);
/* On-board MicroSD slot */
void ma5d4evk_mci1_hw_init(void)
{
- at91_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
- at91_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
- at91_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
- at91_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
- at91_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
- at91_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
/*
* As the mci io internal pull down is too strong, so if the io needs
* the power consumption will increase, so disable the internal pull
* down to save the power.
*/
- at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
/* Deal with WP pin on the microSD slot. */
at91_set_pio_output(AT91_PIO_PORTE, 16, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 16, 1);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 16, 1);
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_MCI1);
/* De-assert reset on On-SoM eMMC */
at91_set_pio_output(AT91_PIO_PORTE, 15, 1);
- at91_set_pio_pulldown(AT91_PIO_PORTE, 15, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 15, 0);
ret = atmel_mci_init((void *)ATMEL_BASE_MCI0);
if (ret) /* eMMC init failed, skip it. */
#ifdef CONFIG_MACB
void ma5d4evk_macb0_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
- at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
- at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
- at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
- at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
- at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_GMAC0);
static void ma5d4evk_serial_hw_init(void)
{
/* USART0 */
- at91_set_a_periph(AT91_PIO_PORTD, 13, 1); /* TXD */
- at91_set_a_periph(AT91_PIO_PORTD, 12, 0); /* RXD */
- at91_set_a_periph(AT91_PIO_PORTD, 11, 0); /* RTS */
- at91_set_a_periph(AT91_PIO_PORTD, 10, 0); /* CTS */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1); /* TXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 0); /* RXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 0); /* RTS */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 0); /* CTS */
at91_periph_clk_enable(ATMEL_ID_USART0);
/* USART1 */
- at91_set_a_periph(AT91_PIO_PORTD, 17, 1); /* TXD */
- at91_set_a_periph(AT91_PIO_PORTD, 16, 0); /* RXD */
- at91_set_a_periph(AT91_PIO_PORTD, 15, 0); /* RTS */
- at91_set_a_periph(AT91_PIO_PORTD, 14, 0); /* CTS */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 17, 1); /* TXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 16, 0); /* RXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 15, 0); /* RTS */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 14, 0); /* CTS */
at91_periph_clk_enable(ATMEL_ID_USART1);
}
at91_set_pio_output(AT91_PIO_PORTB, 21, 0);
udelay(100);
at91_set_pio_output(AT91_PIO_PORTB, 21, 1);
- at91_set_pio_pulldown(AT91_PIO_PORTB, 21, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTB, 21, 0);
ma5d4evk_serial_hw_init();
return 0;
}
-int initdram(void)
+int dram_init(void)
{
gd->ram_size = get_ram_size(0, fixed_sdram(NULL, NULL, 0));
};
/*
- * initdram -- 440EPx's DDR controller is a DENALI Core
+ * dram_init -- 440EPx's DDR controller is a DENALI Core
*/
int initdram_by_rb(int rows, int banks)
{
return 0;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t size;
int n;
void ddr_enable_ecc(unsigned int dram_size);
-int initdram(void)
+int dram_init(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = 0;
popts->cpo_sample = 0x3e;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size;
puts("\n\n");
- initdram();
+ dram_init();
#ifdef CONFIG_SPL_NAND_BOOT
nand_boot();
i2c_init_all();
- initdram();
+ dram_init();
#ifdef CONFIG_SPL_NAND_BOOT
puts("TPL\n");
popts->ddr_cdr1 = DDR_CDR1_DHC_EN;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size;
}
#endif
-int initdram(void)
+int fsl_initdram(void)
{
phys_size_t dram_size;
* before accessing DDR SPD.
*/
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
- return initdram();
+ return fsl_initdram();
}
#ifdef CONFIG_FSL_ESDHC
#endif
}
-int initdram(void)
+int fsl_initdram(void)
{
phys_size_t dram_size;
#include <common.h>
#include <i2c.h>
#include <fdt_support.h>
+#include <fsl_ddr_sdram.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
* before accessing DDR SPD.
*/
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
- initdram();
+ fsl_initdram();
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
/* This will break-before-make MMU for DDR */
update_early_mmu_table();
}
#endif
-int initdram(void)
+int fsl_initdram(void)
{
phys_size_t dram_size;
popts->cpo_sample = 0x70;
}
-int initdram(void)
+int fsl_initdram(void)
{
phys_size_t dram_size;
#include <common.h>
#include <i2c.h>
#include <fdt_support.h>
+#include <fsl_ddr_sdram.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
* before accessing DDR SPD.
*/
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
- initdram();
+ fsl_initdram();
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
/* This will break-before-make MMU for DDR */
update_early_mmu_table();
popts->cpo_sample = 0x70;
}
-int initdram(void)
+int fsl_initdram(void)
{
phys_size_t dram_size;
return 0;
}
#endif
-int initdram(void)
+
+int fsl_initdram(void)
{
puts("Initializing DDR....");
}
}
-int initdram(void)
+int fsl_initdram(void)
{
#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
gd->ram_size = fsl_ddr_sdram_size();
}
}
-int initdram(void)
+int fsl_initdram(void)
{
#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
gd->ram_size = fsl_ddr_sdram_size();
return 0;
};
-int initdram(void)
+int dram_init(void)
{
sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
u32 dramsize, i;
return 0;
};
-int initdram(void)
+int dram_init(void)
{
u32 dramsize;
return 0;
};
-int initdram(void)
+int dram_init(void)
{
sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
};
-int initdram(void)
+int dram_init(void)
{
unsigned long junk = 0xa5a59696;
return 0;
};
-int initdram(void)
+int dram_init(void)
{
u32 dramsize = 0;
return 0;
};
-int initdram(void)
+int dram_init(void)
{
/*
* Check to see if the SDRAM has already been initialized
return 0;
};
-int initdram(void)
+int dram_init(void)
{
sdramctrl_t * sdp = (sdramctrl_t *)(MMAP_SDRAM);
return 0;
};
-int initdram(void)
+int dram_init(void)
{
sdramctrl_t *sdp = (sdramctrl_t *)(MMAP_SDRAM);
gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO);
return 0;
}
-int initdram(void)
+int dram_init(void)
{
u32 dramsize, i, dramclk;
return 0;
};
-int initdram(void)
+int dram_init(void)
{
sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
u32 dramsize, i;
return 0;
};
-int initdram(void)
+int dram_init(void)
{
sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
u32 dramsize, i;
return 0;
};
-int initdram(void)
+int dram_init(void)
{
sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
u32 dramsize, i;
return 0;
};
-int initdram(void)
+int dram_init(void)
{
u32 dramsize;
return 0;
};
-int initdram(void)
+int dram_init(void)
{
u32 dramsize;
#ifdef CONFIG_CF_SBF
return 0;
};
-int initdram(void)
+int dram_init(void)
{
u32 dramsize;
#ifdef CONFIG_CF_SBF
return 0;
};
-int initdram(void)
+int dram_init(void)
{
siu_t *siu = (siu_t *) (MMAP_SIU);
sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
return 0;
};
-int initdram(void)
+int dram_init(void)
{
siu_t *siu = (siu_t *) (MMAP_SIU);
sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
return(ismicron);
}
-int initdram(void)
+int dram_init(void)
{
u32 msize = 0;
/*
return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize);
}
-int initdram(void)
+int dram_init(void)
{
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize;
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
puts("NAND boot... ");
timer_init();
- initdram();
+ dram_init();
relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd,
CONFIG_SYS_NAND_U_BOOT_RELOC);
}
return msize;
}
-int initdram(void)
+int dram_init(void)
{
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile fsl_lbc_t *lbc = &im->im_lbc;
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
puts("NAND boot... ");
timer_init();
- initdram();
+ dram_init();
relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,
CONFIG_SYS_NAND_U_BOOT_RELOC);
}
}
#endif /* CONFIG_SYS_RAMBOOT */
-int initdram(void)
+int dram_init(void)
{
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
u32 msize;
int fixed_sdram(void);
-int initdram(void)
+int dram_init(void)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
int fixed_sdram(void);
-int initdram(void)
+int dram_init(void)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
-int initdram(void)
+int dram_init(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
phys_size_t msize = 0;
};
#endif /* CONFIG_PCI */
-int initdram(void)
+int dram_init(void)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
#endif
int fixed_sdram(void);
-int initdram(void)
+int dram_init(void)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
#endif
int fixed_sdram(void);
-int initdram(void)
+int dram_init(void)
{
immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size = 0;
return 0;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size = 0;
How to use and build U-Boot on mx6sabresd:
----------------------------------
-Currently there are three methods for booting mx6sabresd boards:
+Currently there are four methods for booting mx6sabresd boards:
-1. Booting via Normal U-Boot (u-boot.imx)
+1. Booting from SD card via normal U-Boot (u-boot.imx)
-2. Booting via SPL (SPL and u-boot.img)
+2. Booting from eMMC via normal U-Boot
-3. Booting via Falcon mode (SPL launches the kernel directly)
+3. Booting via SPL (SPL and u-boot.img)
+4. Booting via Falcon mode (SPL launches the kernel directly)
-1. Booting via Normal U-Boot
-----------------------------
+
+1. Booting from SD card via normal U-Boot
+-----------------------------------------
$ make mx6qsabresd_defconfig (If you want to build for mx6qsabresd)
$ sudo dd if=u-boot.imx of=/dev/sdb bs=1K seek=1 && sync
-2. Booting via SPL
+2. Booting from eMMC via normal U-Boot
+--------------------------------------
+
+$ make mx6qsabresd_defconfig (If you want to build for mx6qsabresd)
+
+or
+
+$ make mx6dlsabresd_defconfig (If you want to build for mx6dlsabresd)
+
+$ make
+
+This will generate the image called u-boot.imx.
+
+- Flash the u-boot.imx binary into the eMMC:
+
+Set SW6 to download mode: 00001100
+
+Plug a usb cable to USB-OTG and load the u-boot image using the imx_usb_loader
+tool (https://github.com/boundarydevices/imx_usb_loader):
+
+$ sudo ./imx_usb u-boot.imx
+
+In U-boot change the eMMC partition config:
+
+=> mmc partconf 2 1 0 0
+
+Mount the eMMC in the host PC:
+
+=> ums 0 mmc 2
+
+Flash the u-boot.imx binary
+
+$ sudo dd if=u-boot.imx of=/dev/sdX bs=1K seek=1 && sync
+
+Set SW6 to eMMC 8-bit boot: 11010110
+
+
+3. Booting via SPL
------------------
Other method for building U-Boot on mx6qsabresd and mx6qpsabresd is
$ sudo dd if=u-boot.img of=/dev/sdbbs=1K seek=69 && sync
-3. Booting via Falcon mode
+4. Booting via Falcon mode
--------------------------
$ make mx6sabresd_spl_defconfig
#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
-#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
- PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
#define OTGID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW |\
PAD_CTL_DSE_80ohm | PAD_CTL_HYS | \
imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
/* Power up LAN8720 PHY */
+ gpio_request(ETH_PHY_POWER, "eth_pwr");
gpio_direction_output(ETH_PHY_POWER , 1);
udelay(15000);
}
-#define USDHC1_CD_GPIO IMX_GPIO_NR(4, 7)
-#define USDHC2_CD_GPIO IMX_GPIO_NR(5, 0)
-#define USDHC3_CD_GPIO IMX_GPIO_NR(3, 22)
-
-static struct fsl_esdhc_cfg usdhc_cfg[3] = {
- {USDHC1_BASE_ADDR},
- {USDHC2_BASE_ADDR, 0, 4},
- {USDHC3_BASE_ADDR, 0, 4},
-};
-
int board_mmc_get_env_dev(int devno)
{
return devno;
}
-int board_mmc_getcd(struct mmc *mmc)
+#ifdef CONFIG_DM_PMIC_PFUZE100
+int power_init_board(void)
{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
+ struct udevice *dev;
+ int ret;
+ u32 dev_id, rev_id, i;
+ u32 switch_num = 6;
+ u32 offset = PFUZE100_SW1CMODE;
- switch (cfg->esdhc_base) {
- case USDHC1_BASE_ADDR:
- ret = !gpio_get_value(USDHC1_CD_GPIO);
- break;
- case USDHC2_BASE_ADDR:
- ret = !gpio_get_value(USDHC2_CD_GPIO);
- break;
- case USDHC3_BASE_ADDR:
- ret = !gpio_get_value(USDHC3_CD_GPIO);
- break;
- }
-
- return ret;
-}
+ ret = pmic_get("pfuze100", &dev);
+ if (ret == -ENODEV)
+ return 0;
-int board_mmc_init(bd_t *bis)
-{
-#ifndef CONFIG_SPL_BUILD
- int i, ret;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-Boot device node) (Physical Port)
- * mmc0 USDHC1
- * mmc1 USDHC2
- * mmc2 USDHC3
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- imx_iomux_v3_setup_multiple_pads(
- usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
- gpio_direction_input(USDHC1_CD_GPIO);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- break;
- case 1:
- imx_iomux_v3_setup_multiple_pads(
- usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
- gpio_direction_input(USDHC2_CD_GPIO);
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- break;
- case 2:
- imx_iomux_v3_setup_multiple_pads(
- usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
- gpio_direction_input(USDHC3_CD_GPIO);
- usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- break;
- default:
- printf("Warning: you configured more USDHC controllers"
- "(%d) than supported by the board\n", i + 1);
- return -EINVAL;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret) {
- printf("Warning: failed to initialize "
- "mmc dev %d\n", i);
- return ret;
- }
- }
+ if (ret != 0)
+ return ret;
- return 0;
-#else
- struct src *src_regs = (struct src *)SRC_BASE_ADDR;
- u32 val;
- u32 port;
+ dev_id = pmic_reg_read(dev, PFUZE100_DEVICEID);
+ rev_id = pmic_reg_read(dev, PFUZE100_REVID);
+ printf("PMIC: PFUZE100! DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id);
- val = readl(&src_regs->sbmr1);
+ /* set SW1AB staby volatage 0.975V */
+ pmic_clrsetbits(dev, PFUZE100_SW1ABSTBY, 0x3f, 0x1b);
- /* Boot from USDHC */
- port = (val >> 11) & 0x3;
- switch (port) {
- case 0:
- imx_iomux_v3_setup_multiple_pads(usdhc1_pads,
- ARRAY_SIZE(usdhc1_pads));
- gpio_direction_input(USDHC1_CD_GPIO);
- usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- break;
- case 1:
- imx_iomux_v3_setup_multiple_pads(usdhc2_pads,
- ARRAY_SIZE(usdhc2_pads));
- gpio_direction_input(USDHC2_CD_GPIO);
- usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
- usdhc_cfg[0].max_bus_width = 4;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- break;
- case 2:
- imx_iomux_v3_setup_multiple_pads(usdhc3_pads,
- ARRAY_SIZE(usdhc3_pads));
- gpio_direction_input(USDHC3_CD_GPIO);
- usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
- usdhc_cfg[0].max_bus_width = 4;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- break;
- }
+ /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ pmic_clrsetbits(dev, PFUZE100_SW1ABCONF, 0xc0, 0x40);
- gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
- return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-#endif
-}
+ /* set SW1C staby volatage 0.975V */
+ pmic_clrsetbits(dev, PFUZE100_SW1CSTBY, 0x3f, 0x1b);
-#ifdef CONFIG_SYS_I2C_MXC
-#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
-/* I2C1 for PMIC */
-struct i2c_pads_info i2c_pad_info1 = {
- .sda = {
- .i2c_mode = MX6_PAD_I2C1_SDA__I2C1_SDA | PC,
- .gpio_mode = MX6_PAD_I2C1_SDA__GPIO_3_13 | PC,
- .gp = IMX_GPIO_NR(3, 13),
- },
- .scl = {
- .i2c_mode = MX6_PAD_I2C1_SCL__I2C1_SCL | PC,
- .gpio_mode = MX6_PAD_I2C1_SCL__GPIO_3_12 | PC,
- .gp = IMX_GPIO_NR(3, 12),
- },
-};
+ /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+ pmic_clrsetbits(dev, PFUZE100_SW1CCONF, 0xc0, 0x40);
-int power_init_board(void)
-{
- struct pmic *p;
+ /* Init mode to APS_PFM */
+ pmic_reg_write(dev, PFUZE100_SW1ABMODE, APS_PFM);
- p = pfuze_common_init(I2C_PMIC);
- if (!p)
- return -ENODEV;
+ for (i = 0; i < switch_num - 1; i++)
+ pmic_reg_write(dev, offset + i * SWITCH_SIZE, APS_PFM);
- return pfuze_mode_init(p, APS_PFM);
+ return 0;
}
#endif
int board_early_init_f(void)
{
setup_iomux_uart();
-#ifdef CONFIG_MXC_SPI
- setup_spi();
-#endif
+
return 0;
}
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-#ifdef CONFIG_SYS_I2C_MXC
- setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+#ifdef CONFIG_MXC_SPI
+ gpio_request(IMX_GPIO_NR(4, 11), "spi_cs");
+ setup_spi();
#endif
#ifdef CONFIG_FEC_MXC
#include <spl.h>
#include <libfdt.h>
+#define USDHC1_CD_GPIO IMX_GPIO_NR(4, 7)
+#define USDHC2_CD_GPIO IMX_GPIO_NR(5, 0)
+#define USDHC3_CD_GPIO IMX_GPIO_NR(3, 22)
+
+static struct fsl_esdhc_cfg usdhc_cfg[3] = {
+ {USDHC1_BASE_ADDR},
+ {USDHC2_BASE_ADDR, 0, 4},
+ {USDHC3_BASE_ADDR, 0, 4},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC1_BASE_ADDR:
+ ret = !gpio_get_value(USDHC1_CD_GPIO);
+ break;
+ case USDHC2_BASE_ADDR:
+ ret = !gpio_get_value(USDHC2_CD_GPIO);
+ break;
+ case USDHC3_BASE_ADDR:
+ ret = !gpio_get_value(USDHC3_CD_GPIO);
+ break;
+ }
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+ u32 val;
+ u32 port;
+
+ val = readl(&src_regs->sbmr1);
+
+ /* Boot from USDHC */
+ port = (val >> 11) & 0x3;
+ switch (port) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(usdhc1_pads,
+ ARRAY_SIZE(usdhc1_pads));
+ gpio_direction_input(USDHC1_CD_GPIO);
+ usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(usdhc2_pads,
+ ARRAY_SIZE(usdhc2_pads));
+ gpio_direction_input(USDHC2_CD_GPIO);
+ usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
+ usdhc_cfg[0].max_bus_width = 4;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ break;
+ case 2:
+ imx_iomux_v3_setup_multiple_pads(usdhc3_pads,
+ ARRAY_SIZE(usdhc3_pads));
+ gpio_direction_input(USDHC3_CD_GPIO);
+ usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
+ usdhc_cfg[0].max_bus_width = 4;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ break;
+ }
+
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+}
+
const struct mx6sl_iomux_ddr_regs mx6_ddr_ioregs = {
.dram_sdqs0 = 0x00003030,
.dram_sdqs1 = 0x00003030,
i2c_init_all();
- initdram();
+ dram_init();
#ifdef CONFIG_SPL_NAND_BOOT
puts("\nTertiary program loader running in sram...");
#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
- initdram();
+ dram_init();
#ifdef CONFIG_SPL_NAND_BOOT
puts("Tertiary program loader running in sram...");
#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
- initdram();
+ dram_init();
#ifdef CONFIG_SPL_NAND_BOOT
puts("Tertiary program loader running in sram...");
#else
popts->ddr_cdr1 = DDR_CDR1_DHC_EN;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size = 0;
}
#endif
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size;
i2c_init_all();
- initdram();
+ dram_init();
#ifdef CONFIG_SPL_MMC_BOOT
mmc_boot();
}
#endif
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size;
i2c_init_all();
- initdram();
+ dram_init();
#ifdef CONFIG_SPL_MMC_BOOT
mmc_boot();
}
#endif
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size;
}
#endif
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size;
puts("\n\n");
- initdram();
+ dram_init();
#ifdef CONFIG_SPL_MMC_BOOT
mmc_boot();
popts->cpo_sample = 0x64;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size;
i2c_init_all();
- initdram();
+ dram_init();
#ifdef CONFIG_SPL_MMC_BOOT
mmc_boot();
popts->cpo_sample = 0x54;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size;
i2c_init_all();
- initdram();
+ dram_init();
#ifdef CONFIG_SPL_MMC_BOOT
mmc_boot();
popts->cpo_sample = 0x63;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size;
i2c_init_all();
- initdram();
+ dram_init();
#ifdef CONFIG_SPL_MMC_BOOT
mmc_boot();
popts->cpo_sample = 0x64;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size;
i2c_init_all();
- initdram();
+ dram_init();
mmc_boot();
}
#include <config.h>
#include <asm/leon.h>
-int initdram(void)
+int dram_init(void)
{
/* Does not set gd->ram_size here */
#include <config.h>
#include <asm/leon.h>
-int initdram(void)
+int dram_init(void)
{
/* Does not set gd->ram_size here */
#include <config.h>
#include <asm/leon.h>
-int initdram(void)
+int dram_init(void)
{
/* Does not set gd->ram_size here */
#include <common.h>
#include <asm/leon.h>
-int initdram(void)
+int dram_init(void)
{
/* Does not set gd->ram_size here */
#include <common.h>
#include <asm/leon.h>
-int initdram(void)
+int dram_init(void)
{
/* Does not set gd->ram_size here */
S: Maintained
F: board/gateworks/gw_ventana/
F: include/configs/gw_ventana.h
-F: configs/gwventana_defconfig
+F: configs/gwventana_nand_defconfig
+F: configs/gwventana_emmc_defconfig
+F: configs/gwventana_gw5904_defconfig
}
/* MMC */
+static iomux_v3_cfg_t const gw5904_emmc_pads[] = {
+ IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
+/* 4-bit microSD on SD2 */
+static iomux_v3_cfg_t const gw5904_mmc_pads[] = {
+ IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ /* CD */
+ IOMUX_PADS(PAD_NANDF_CS0__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
+/* 8-bit eMMC on SD2/NAND */
+static iomux_v3_cfg_t const gw560x_emmc_sd2_pads[] = {
+ IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D4__SD2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D5__SD2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D6__SD2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_D7__SD2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
+
static iomux_v3_cfg_t const usdhc3_pads[] = {
IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
};
+static iomux_v3_cfg_t const gw560x_gpio_pads[] = {
+ /* RS232_EN# */
+ IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG),
+ /* CAN_STBY */
+ IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
+ /* USB_HUBRST# */
+ IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
+ /* PANLEDG# */
+ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
+ /* PANLEDR# */
+ IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
+ /* MX6_LOCLED# */
+ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
+ /* IOEXP_PWREN# */
+ IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
+ /* IOEXP_IRQ# */
+ IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
+ /* DIOI2C_DIS# */
+ IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
+ /* VID_EN */
+ IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
+ /* PCI_RST# */
+ IOMUX_PADS(PAD_DISP0_DAT10__GPIO4_IO31 | DIO_PAD_CFG),
+ /* RS485_EN */
+ IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG),
+ /* PCIESKT_WDIS# */
+ IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
+ /* USBH2_PEN (OTG) */
+ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
+ /* 12V0_PWR_EN */
+ IOMUX_PADS(PAD_DISP0_DAT5__GPIO4_IO26 | DIO_PAD_CFG),
+};
+
+static iomux_v3_cfg_t const gw5903_gpio_pads[] = {
+ /* BKLT_12VEN */
+ IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG),
+ /* EMMY_PDN# */
+ IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02 | DIO_PAD_CFG),
+ /* EMMY_CFG1# */
+ IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03 | DIO_PAD_CFG),
+ /* EMMY_CFG1# */
+ IOMUX_PADS(PAD_NANDF_D4__GPIO2_IO04 | DIO_PAD_CFG),
+ /* USBH1_PEN (EHCI) */
+ IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
+ /* USBH2_PEN (OTG) */
+ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
+ /* USBDPC_PEN */
+ IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
+ /* TOUCH_RST */
+ IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | DIO_PAD_CFG),
+ /* AUDIO_RST# */
+ IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG),
+ /* UART1_TEN# */
+ IOMUX_PADS(PAD_CSI0_DAT12__GPIO5_IO30 | DIO_PAD_CFG),
+ /* MX6_LOCLED# */
+ IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG),
+ /* LVDS_BKLEN # */
+ IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
+ /* RGMII_PDWN# */
+ IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | DIO_PAD_CFG),
+ /* TOUCH_IRQ# */
+ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
+ /* TOUCH_RST# */
+ IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | DIO_PAD_CFG),
+};
+
+static iomux_v3_cfg_t const gw5904_gpio_pads[] = {
+ /* USB_HUBRST# */
+ IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
+ /* PANLEDG# */
+ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
+ /* PANLEDR# */
+ IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
+ /* MX6_LOCLED# */
+ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
+ /* IOEXP_PWREN# */
+ IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
+ /* IOEXP_IRQ# */
+ IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
+ /* DIOI2C_DIS# */
+ IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
+ /* UART_RS485 */
+ IOMUX_PADS(PAD_DISP0_DAT2__GPIO4_IO23 | DIO_PAD_CFG),
+ /* UART_HALF */
+ IOMUX_PADS(PAD_DISP0_DAT3__GPIO4_IO24 | DIO_PAD_CFG),
+ /* SKT1_WDIS# */
+ IOMUX_PADS(PAD_DISP0_DAT17__GPIO5_IO11 | DIO_PAD_CFG),
+ /* SKT1_RST# */
+ IOMUX_PADS(PAD_DISP0_DAT18__GPIO5_IO12 | DIO_PAD_CFG),
+ /* SKT2_WDIS# */
+ IOMUX_PADS(PAD_DISP0_DAT19__GPIO5_IO13 | DIO_PAD_CFG),
+ /* SKT2_RST# */
+ IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG),
+ /* M2_OFF# */
+ IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15 | DIO_PAD_CFG),
+ /* M2_WDIS# */
+ IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14 | DIO_PAD_CFG),
+ /* M2_RST# */
+ IOMUX_PADS(PAD_SD2_DAT2__GPIO1_IO13 | DIO_PAD_CFG),
+};
+
/* Digital I/O */
struct dio_cfg gw51xx_dio[] = {
{
},
};
+struct dio_cfg gw560x_dio[] = {
+ {
+ { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
+ IMX_GPIO_NR(1, 16),
+ { 0, 0 },
+ 0
+ },
+ {
+ { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
+ IMX_GPIO_NR(1, 19),
+ { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
+ 2
+ },
+ {
+ { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
+ IMX_GPIO_NR(1, 17),
+ { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
+ 3
+ },
+ {
+ {IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) },
+ IMX_GPIO_NR(1, 20),
+ { 0, 0 },
+ 0
+ },
+};
+
+struct dio_cfg gw5903_dio[] = {
+};
+
+struct dio_cfg gw5904_dio[] = {
+ {
+ { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
+ IMX_GPIO_NR(1, 16),
+ { 0, 0 },
+ 0
+ },
+ {
+ { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
+ IMX_GPIO_NR(1, 19),
+ { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
+ 2
+ },
+ {
+ { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
+ IMX_GPIO_NR(1, 17),
+ { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
+ 3
+ },
+ {
+ {IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) },
+ IMX_GPIO_NR(1, 20),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00) },
+ IMX_GPIO_NR(2, 0),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D1__GPIO2_IO01) },
+ IMX_GPIO_NR(2, 1),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02) },
+ IMX_GPIO_NR(2, 2),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03) },
+ IMX_GPIO_NR(2, 3),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D4__GPIO2_IO04) },
+ IMX_GPIO_NR(2, 4),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D5__GPIO2_IO05) },
+ IMX_GPIO_NR(2, 5),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D6__GPIO2_IO06) },
+ IMX_GPIO_NR(2, 6),
+ { 0, 0 },
+ 0
+ },
+ {
+ {IOMUX_PADS(PAD_NANDF_D7__GPIO2_IO07) },
+ IMX_GPIO_NR(2, 7),
+ { 0, 0 },
+ 0
+ },
+};
+
/*
* Board Specific GPIO
*/
.dioi2c_en = IMX_GPIO_NR(4, 5),
.pcie_sson = IMX_GPIO_NR(1, 20),
.otgpwr_en = IMX_GPIO_NR(3, 22),
+ .mmc_cd = IMX_GPIO_NR(7, 0),
},
/* GW51xx */
.rs232_en = GP_RS232_EN,
.otgpwr_en = IMX_GPIO_NR(3, 22),
.vsel_pin = IMX_GPIO_NR(6, 14),
+ .mmc_cd = IMX_GPIO_NR(7, 0),
},
/* GW53xx */
.rs232_en = GP_RS232_EN,
.otgpwr_en = IMX_GPIO_NR(3, 22),
.vsel_pin = IMX_GPIO_NR(6, 14),
+ .mmc_cd = IMX_GPIO_NR(7, 0),
},
/* GW54xx */
.rs232_en = GP_RS232_EN,
.otgpwr_en = IMX_GPIO_NR(3, 22),
.vsel_pin = IMX_GPIO_NR(6, 14),
+ .mmc_cd = IMX_GPIO_NR(7, 0),
},
/* GW551x */
.wdis = IMX_GPIO_NR(7, 12),
.otgpwr_en = IMX_GPIO_NR(3, 22),
.vsel_pin = IMX_GPIO_NR(6, 14),
+ .mmc_cd = IMX_GPIO_NR(7, 0),
+ },
+
+ /* GW560x */
+ {
+ .gpio_pads = gw560x_gpio_pads,
+ .num_pads = ARRAY_SIZE(gw560x_gpio_pads)/2,
+ .dio_cfg = gw560x_dio,
+ .dio_num = ARRAY_SIZE(gw560x_dio),
+ .leds = {
+ IMX_GPIO_NR(4, 6),
+ IMX_GPIO_NR(4, 7),
+ IMX_GPIO_NR(4, 15),
+ },
+ .pcie_rst = IMX_GPIO_NR(4, 31),
+ .mezz_pwren = IMX_GPIO_NR(2, 19),
+ .mezz_irq = IMX_GPIO_NR(2, 18),
+ .rs232_en = GP_RS232_EN,
+ .vidin_en = IMX_GPIO_NR(3, 31),
+ .wdis = IMX_GPIO_NR(7, 12),
+ .otgpwr_en = IMX_GPIO_NR(4, 15),
+ .mmc_cd = IMX_GPIO_NR(7, 0),
+ },
+
+ /* GW5903 */
+ {
+ .gpio_pads = gw5903_gpio_pads,
+ .num_pads = ARRAY_SIZE(gw5903_gpio_pads)/2,
+ .dio_cfg = gw5903_dio,
+ .dio_num = ARRAY_SIZE(gw5903_dio),
+ .leds = {
+ IMX_GPIO_NR(6, 14),
+ },
+ .otgpwr_en = IMX_GPIO_NR(4, 15),
+ .mmc_cd = IMX_GPIO_NR(6, 11),
+ },
+
+ /* GW5904 */
+ {
+ .gpio_pads = gw5904_gpio_pads,
+ .num_pads = ARRAY_SIZE(gw5904_gpio_pads)/2,
+ .dio_cfg = gw5904_dio,
+ .dio_num = ARRAY_SIZE(gw5904_dio),
+ .leds = {
+ IMX_GPIO_NR(4, 6),
+ IMX_GPIO_NR(4, 7),
+ IMX_GPIO_NR(4, 15),
+ },
+ .pcie_rst = IMX_GPIO_NR(1, 0),
+ .mezz_pwren = IMX_GPIO_NR(2, 19),
+ .mezz_irq = IMX_GPIO_NR(2, 18),
+ .otgpwr_en = IMX_GPIO_NR(3, 22),
},
};
gpio_direction_input(gpio_cfg[board].vsel_pin);
gpio_cfg[board].usd_vsel = !gpio_get_value(gpio_cfg[board].vsel_pin);
}
+
+ /* microSD CD */
+ if (gpio_cfg[board].mmc_cd) {
+ gpio_request(gpio_cfg[board].mmc_cd, "sd_cd");
+ gpio_direction_input(gpio_cfg[board].mmc_cd);
+ }
+
+ /* Anything else board specific */
+ switch(board) {
+ case GW560x:
+ gpio_request(IMX_GPIO_NR(4, 26), "12p0_en");
+ gpio_direction_output(IMX_GPIO_NR(4, 26), 1);
+ break;
+ case GW5903:
+ gpio_request(IMX_GPIO_NR(3, 31) , "usbh1-ehci_pwr");
+ gpio_direction_output(IMX_GPIO_NR(3, 31), 1);
+ gpio_request(IMX_GPIO_NR(4, 15) , "usbh2-otg_pwr");
+ gpio_direction_output(IMX_GPIO_NR(4, 15), 1);
+ gpio_request(IMX_GPIO_NR(4, 7) , "usbdpc_pwr");
+ gpio_direction_output(IMX_GPIO_NR(4, 15), 1);
+ gpio_request(IMX_GPIO_NR(1, 25) , "rgmii_en");
+ gpio_direction_output(IMX_GPIO_NR(1, 25), 1);
+ gpio_request(IMX_GPIO_NR(4, 6) , "touch_irq#");
+ gpio_direction_input(IMX_GPIO_NR(4, 6));
+ gpio_request(IMX_GPIO_NR(4, 8) , "touch_rst");
+ gpio_direction_output(IMX_GPIO_NR(4, 8), 1);
+ gpio_request(IMX_GPIO_NR(1, 7) , "bklt_12ven");
+ gpio_direction_output(IMX_GPIO_NR(1, 7), 1);
+ break;
+ case GW5904:
+ gpio_request(IMX_GPIO_NR(5, 11), "skt1_wdis#");
+ gpio_direction_output(IMX_GPIO_NR(5, 11), 1);
+ gpio_request(IMX_GPIO_NR(5, 12), "skt1_rst#");
+ gpio_direction_output(IMX_GPIO_NR(5, 12), 1);
+ gpio_request(IMX_GPIO_NR(5, 13), "skt2_wdis#");
+ gpio_direction_output(IMX_GPIO_NR(5, 13), 1);
+ gpio_request(IMX_GPIO_NR(1, 15), "m2_off#");
+ gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
+ gpio_request(IMX_GPIO_NR(1, 14), "m2_wdis#");
+ gpio_direction_output(IMX_GPIO_NR(1, 14), 1);
+ gpio_request(IMX_GPIO_NR(1, 13), "m2_rst#");
+ gpio_direction_output(IMX_GPIO_NR(1, 13), 1);
+ break;
+ }
}
/* setup GPIO pinmux and default configuration per baseboard and env */
void setup_pmic(void)
{
struct pmic *p;
+ struct ventana_board_info ventana_info;
+ int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
u32 reg;
i2c_set_bus_num(CONFIG_I2C_PMIC);
debug("probed LTC3676@0x%x\n", CONFIG_POWER_LTC3676_I2C_ADDR);
power_ltc3676_init(CONFIG_I2C_PMIC);
p = pmic_get("LTC3676_PMIC");
- if (p && !pmic_probe(p)) {
- puts("PMIC: LTC3676\n");
- /*
- * set board-specific scalar for max CPU frequency
- * per CPU based on the LDO enabled Operating Ranges
- * defined in the respective IMX6DQ and IMX6SDL
- * datasheets. The voltage resulting from the R1/R2
- * feedback inputs on Ventana is 1308mV. Note that this
- * is a bit shy of the Vmin of 1350mV in the datasheet
- * for LDO enabled mode but is as high as we can go.
- *
- * We will rely on an OS kernel driver to properly
- * regulate these per CPU operating point and use LDO
- * bypass mode when using the higher frequency
- * operating points to compensate as LDO bypass mode
- * allows the rails be 125mV lower.
- */
+ if (!p || pmic_probe(p))
+ return;
+ puts("PMIC: LTC3676\n");
+ /*
+ * set board-specific scalar for max CPU frequency
+ * per CPU based on the LDO enabled Operating Ranges
+ * defined in the respective IMX6DQ and IMX6SDL
+ * datasheets. The voltage resulting from the R1/R2
+ * feedback inputs on Ventana is 1308mV. Note that this
+ * is a bit shy of the Vmin of 1350mV in the datasheet
+ * for LDO enabled mode but is as high as we can go.
+ */
+ switch (board) {
+ case GW560x:
+ /* mask PGOOD during SW3 transition */
+ pmic_reg_write(p, LTC3676_DVB3B,
+ 0x1f | LTC3676_PGOOD_MASK);
+ /* set SW3 (VDD_ARM) */
+ pmic_reg_write(p, LTC3676_DVB3A, 0x1f);
+ break;
+ case GW5903:
+ /* mask PGOOD during SW1 transition */
+ pmic_reg_write(p, LTC3676_DVB3B,
+ 0x1f | LTC3676_PGOOD_MASK);
+ /* set SW3 (VDD_ARM) */
+ pmic_reg_write(p, LTC3676_DVB3A, 0x1f);
+
+ /* mask PGOOD during SW4 transition */
+ pmic_reg_write(p, LTC3676_DVB4B,
+ 0x1f | LTC3676_PGOOD_MASK);
+ /* set SW4 (VDD_SOC) */
+ pmic_reg_write(p, LTC3676_DVB4A, 0x1f);
+ break;
+ default:
/* mask PGOOD during SW1 transition */
pmic_reg_write(p, LTC3676_DVB1B,
0x1f | LTC3676_PGOOD_MASK);
}
#ifdef CONFIG_FSL_ESDHC
-static struct fsl_esdhc_cfg usdhc_cfg = { USDHC3_BASE_ADDR };
+static struct fsl_esdhc_cfg usdhc_cfg[2];
int board_mmc_init(bd_t *bis)
{
- /* Only one USDHC controller on Ventana */
- SETUP_IOMUX_PADS(usdhc3_pads);
- usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- usdhc_cfg.max_bus_width = 4;
-
- return fsl_esdhc_initialize(bis, &usdhc_cfg);
+ struct ventana_board_info ventana_info;
+ int board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
+ int ret;
+
+ switch (board_type) {
+ case GW52xx:
+ case GW53xx:
+ case GW54xx:
+ case GW553x:
+ /* usdhc3: 4bit microSD */
+ SETUP_IOMUX_PADS(usdhc3_pads);
+ usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[0].max_bus_width = 4;
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+ case GW560x:
+ /* usdhc2: 8-bit eMMC */
+ SETUP_IOMUX_PADS(gw560x_emmc_sd2_pads);
+ usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ usdhc_cfg[0].max_bus_width = 8;
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+ if (ret)
+ return ret;
+ /* usdhc3: 4-bit microSD */
+ SETUP_IOMUX_PADS(usdhc3_pads);
+ usdhc_cfg[1].esdhc_base = USDHC3_BASE_ADDR;
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[1].max_bus_width = 4;
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
+ case GW5903:
+ /* usdhc3: 8-bit eMMC */
+ SETUP_IOMUX_PADS(gw5904_emmc_pads);
+ usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[0].max_bus_width = 8;
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+ if (ret)
+ return ret;
+ /* usdhc2: 4-bit microSD */
+ SETUP_IOMUX_PADS(gw5904_mmc_pads);
+ usdhc_cfg[1].esdhc_base = USDHC2_BASE_ADDR;
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ usdhc_cfg[1].max_bus_width = 4;
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
+ case GW5904:
+ /* usdhc3: 8bit eMMC */
+ SETUP_IOMUX_PADS(gw5904_emmc_pads);
+ usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[0].max_bus_width = 8;
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+ default:
+ /* doesn't have MMC */
+ return -1;
+ }
}
int board_mmc_getcd(struct mmc *mmc)
{
+ struct ventana_board_info ventana_info;
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
+ int gpio = gpio_cfg[board].mmc_cd;
+
/* Card Detect */
- gpio_request(GP_SD3_CD, "sd_cd");
- gpio_direction_input(GP_SD3_CD);
- return !gpio_get_value(GP_SD3_CD);
+ switch (board) {
+ case GW560x:
+ /* emmc is always present */
+ if (cfg->esdhc_base == USDHC2_BASE_ADDR)
+ return 1;
+ break;
+ case GW5903:
+ case GW5904:
+ /* emmc is always present */
+ if (cfg->esdhc_base == USDHC3_BASE_ADDR)
+ return 1;
+ break;
+ }
+
+ if (gpio) {
+ debug("%s: gpio%d=%d\n", __func__, gpio, gpio_get_value(gpio));
+ return !gpio_get_value(gpio);
+ }
+
+ return -1;
}
+
#endif /* CONFIG_FSL_ESDHC */
/* GPIO's common to all baseboards */
#define GP_PHY_RST IMX_GPIO_NR(1, 30)
-#define GP_SD3_CD IMX_GPIO_NR(7, 0)
#define GP_RS232_EN IMX_GPIO_NR(2, 11)
#define GP_MSATA_SEL IMX_GPIO_NR(2, 8)
int rs232_en;
int otgpwr_en;
int vsel_pin;
+ int mmc_cd;
/* various features */
bool usd_vsel;
};
if (strncasecmp((const char *)info->model, "GW5400-A", 8) == 0)
baseboard = '0';
+ type = GW_UNKNOWN;
switch (baseboard) {
case '0': /* original GW5400-A prototype */
type = GW54proto;
type = GW553x;
break;
}
- /* fall through */
- default:
- printf("EEPROM: Unknown model in EEPROM: %s\n", info->model);
- type = GW_UNKNOWN;
+ break;
+ case '6':
+ if (info->model[4] == '0')
+ type = GW560x;
+ break;
+ case '9':
+ if (info->model[4] == '0' && info->model[5] == '3')
+ type = GW5903;
+ if (info->model[4] == '0' && info->model[5] == '4')
+ type = GW5904;
break;
}
return type;
break;
case '5': /* GW55xx */
break;
+ case '6': /* GW560x */
+ read_hwmon("VDD_IO4", GSC_HWMON_VDD_IO4, 3);
+ read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3);
+ break;
}
return 0;
}
/* toggle PHY_RST# */
gpio_request(gpio, "phy_rst#");
gpio_direction_output(gpio, 0);
- mdelay(2);
+ mdelay(10);
gpio_set_value(gpio, 1);
+ mdelay(100);
}
#ifdef CONFIG_USB_EHCI_MX6
phy_write(phydev, MDIO_DEVAD_NONE, 22, 0);
}
+ /* TI DP83867 */
+ else if (phydev->phy_id == 0x2000a231) {
+ /* configure register 0x170 for ref CLKOUT */
+ phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x001f);
+ phy_write(phydev, MDIO_DEVAD_NONE, 14, 0x0170);
+ phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x401f);
+ val = phy_read(phydev, MDIO_DEVAD_NONE, 14);
+ val &= ~0x1f00;
+ val |= 0x0b00; /* chD tx clock*/
+ phy_write(phydev, MDIO_DEVAD_NONE, 14, val);
+ }
+
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
+#ifdef CONFIG_MV88E61XX_SWITCH
+int mv88e61xx_hw_reset(struct phy_device *phydev)
+{
+ struct mii_dev *bus = phydev->bus;
+
+ /* GPIO[0] output, CLK125 */
+ debug("enabling RGMII_REFCLK\n");
+ bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0,
+ 0x1a /*MV_SCRATCH_MISC*/,
+ (1 << 15) | (0x62 /*MV_GPIO_DIR*/ << 8) | 0xfe);
+ bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0,
+ 0x1a /*MV_SCRATCH_MISC*/,
+ (1 << 15) | (0x68 /*MV_GPIO01_CNTL*/ << 8) | 7);
+
+ /* RGMII delay - Physical Control register bit[15:14] */
+ debug("setting port%d RGMII rx/tx delay\n", CONFIG_MV88E61XX_CPU_PORT);
+ /* forced 1000mbps full-duplex link */
+ bus->write(bus, 0x10 + CONFIG_MV88E61XX_CPU_PORT, 0, 1, 0xc0fe);
+ phydev->autoneg = AUTONEG_DISABLE;
+ phydev->speed = SPEED_1000;
+ phydev->duplex = DUPLEX_FULL;
+
+ /* LED configuration: 7:4-green (8=Activity) 3:0 amber (9=10Link) */
+ bus->write(bus, 0x10, 0, 0x16, 0x8089);
+ bus->write(bus, 0x11, 0, 0x16, 0x8089);
+ bus->write(bus, 0x12, 0, 0x16, 0x8089);
+ bus->write(bus, 0x13, 0, 0x16, 0x8089);
+
+ return 0;
+}
+#endif // CONFIG_MV88E61XX_SWITCH
+
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_FEC_MXC
static const struct boot_mode board_boot_modes[] = {
/* NAND: 64pages per block, 3 row addr cycles, 2 copies of FCB/DBBT */
{ "nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00) },
+ { "emmc2", MAKE_CFGVAL(0x60, 0x48, 0x00, 0x00) }, /* GW5600 */
+ { "emmc3", MAKE_CFGVAL(0x60, 0x50, 0x00, 0x00) }, /* GW5903/GW5904 */
{ NULL, 0 },
};
#endif
setenv("fdt_file1", fdt);
if (board_type != GW551x &&
board_type != GW552x &&
- board_type != GW553x)
+ board_type != GW553x &&
+ board_type != GW560x)
str[4] = 'x';
str[5] = 'x';
str[6] = 0;
.p1_mpwrdlctl = 0x383A3930,
};
+static struct mx6_mmdc_calibration mx6sdl_256x64x2_mmdc_calib = {
+ /* write leveling calibration determine */
+ .p0_mpwldectrl0 = 0x001F003F,
+ .p0_mpwldectrl1 = 0x001F001F,
+ .p1_mpwldectrl0 = 0x001F004E,
+ .p1_mpwldectrl1 = 0x0059001F,
+ /* Read DQS Gating calibration */
+ .p0_mpdgctrl0 = 0x42220225,
+ .p0_mpdgctrl1 = 0x0213021F,
+ .p1_mpdgctrl0 = 0x022C0242,
+ .p1_mpdgctrl1 = 0x022C0244,
+ /* Read Calibration: DQS delay relative to DQ read access */
+ .p0_mprddlctl = 0x474A4C4A,
+ .p1_mprddlctl = 0x48494C45,
+ /* Write Calibration: DQ/DM delay relative to DQS write access */
+ .p0_mpwrdlctl = 0x3F3F3F36,
+ .p1_mpwrdlctl = 0x3F36363F,
+};
+
static struct mx6_mmdc_calibration mx6dq_512x32_mmdc_calib = {
/* write leveling calibration determine */
.p0_mpwldectrl0 = 0x002A0025,
calib = &mx6sdl_256x64_mmdc_calib;
debug("4gB density\n");
} else if (width == 64 && size_mb == 4096) {
- mem = &mt41k512m16ha_125;
- if (is_cpu_type(MXC_CPU_MX6Q))
- calib = &mx6dq_512x64_mmdc_calib;
- debug("8gB density\n");
+ switch(board_model) {
+ case GW5903:
+ /* 8xMT41K256M16 (4GiB) fly-by mirrored 2-chipsels */
+ mem = &mt41k256m16ha_125;
+ debug("4gB density\n");
+ if (!is_cpu_type(MXC_CPU_MX6Q)) {
+ calib = &mx6sdl_256x64x2_mmdc_calib;
+ sysinfo.ncs = 2;
+ sysinfo.cs_density = 18; /* CS0_END=71 */
+ sysinfo.cs1_mirror = 1; /* mirror enabled */
+ }
+ break;
+ default:
+ mem = &mt41k512m16ha_125;
+ if (is_cpu_type(MXC_CPU_MX6Q))
+ calib = &mx6dq_512x64_mmdc_calib;
+ debug("8gB density\n");
+ break;
+ }
}
if (!(mem && calib)) {
memset(__bss_start, 0, __bss_end - __bss_start);
}
+void board_boot_order(u32 *spl_boot_list)
+{
+ spl_boot_list[0] = spl_boot_device();
+ switch (spl_boot_list[0]) {
+ case BOOT_DEVICE_NAND:
+ spl_boot_list[1] = BOOT_DEVICE_MMC1;
+ spl_boot_list[2] = BOOT_DEVICE_UART;
+ break;
+ case BOOT_DEVICE_MMC1:
+ spl_boot_list[1] = BOOT_DEVICE_UART;
+ break;
+ }
+}
+
/* called from board_init_r after gd setup if CONFIG_SPL_BOARD_INIT defined */
/* its our chance to print info about boot device */
void spl_board_init(void)
GW551x,
GW552x,
GW553x,
+ GW560x,
+ GW5903,
+ GW5904,
GW_UNKNOWN,
GW_BADCRC,
};
return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize);
}
-int initdram(void)
+int dram_init(void)
{
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize;
return msize;
}
-int initdram(void)
+int dram_init(void)
{
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
fsl_lbc_t *lbc = &im->im_lbc;
/* EMPTY, optional, we don't do it */
};
-int initdram(void)
+int dram_init(void)
{
gd->ram_size = fixed_sdram(NULL, sdram_init_seq,
ARRAY_SIZE(sdram_init_seq));
#endif
/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
+ * ATTENTION: Although partially referenced dram_init does NOT make real use
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if
* CONFIG_SYS_SDRAM_BASE is something else than 0x00000000.
*/
-int initdram(void)
+int dram_init(void)
{
struct mpc5xxx_mmap_ctl *mmap_ctl =
(struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;
DECLARE_GLOBAL_DATA_PTR;
-int initdram(void)
+int dram_init(void)
{
u32 ddrconf0 = __raw_readl((uint32_t *)BOSTON_PLAT_DDRCONF0);
}
}
-int initdram(void)
+int dram_init(void)
{
gd->ram_size = CONFIG_SYS_MEM_SIZE;
DECLARE_GLOBAL_DATA_PTR;
/* initialize the DDR Controller and PHY */
-int initdram(void)
+int dram_init(void)
{
/* MIG IP block is smart and doesn't need SW
* to do any init */
#endif
/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
+ * ATTENTION: Although partially referenced dram_init does NOT make real use
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
-int initdram(void)
+int dram_init(void)
{
volatile struct mpc5xxx_mmap_ctl *mm =
(struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR;
#endif
/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
+ * ATTENTION: Although partially referenced dram_init does NOT make real use
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if
* CONFIG_SYS_SDRAM_BASE is something other than 0x00000000.
*/
-int initdram(void)
+int dram_init(void)
{
ulong dramsize = 0;
ulong dramsize2 = 0;
}
/*
- * ATTENTION: Although partially referenced initdram does NOT make real
+ * ATTENTION: Although partially referenced dram_init does NOT make real
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if
* CONFIG_SYS_SDRAM_BASE is something else than 0x00000000.
*/
-int initdram(void)
+int dram_init(void)
{
struct mpc5xxx_mmap_ctl *mmap_ctl =
(struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;
#endif
/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
+ * ATTENTION: Although partially referenced dram_init does NOT make real use
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
-int initdram(void)
+int dram_init(void)
{
ulong dramsize = 0;
ulong dramsize2 = 0;
#endif /* CONFIG_SYS_SDRAM_LIST */
-int initdram(void)
+int dram_init(void)
{
immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
memctl8260_t *memctl = &immap->im_memctl;
return msize;
}
-int initdram(void)
+int dram_init(void)
{
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = 0;
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR_ODT_75ohm;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size = 0;
static void vinco_spi0_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
#ifdef CONFIG_GENERIC_ATMEL_MCI
void vinco_mci0_hw_init(void)
{
- at91_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI0 CDA */
- at91_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI0 DA0 */
- at91_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI0 DA1 */
- at91_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI0 DA2 */
- at91_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI0 DA3 */
- at91_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI0 DA4 */
- at91_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI0 DA5 */
- at91_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI0 DA6 */
- at91_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI0 DA7 */
- at91_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI0 CLK */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI0 CDA */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI0 DA0 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI0 DA1 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI0 DA2 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI0 DA3 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI0 DA4 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI0 DA5 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI0 DA6 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI0 DA7 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI0 CLK */
/*
* As the mci io internal pull down is too strong, so if the io needs
* the power consumption will increase, so disable the interanl pull
* down to save the power.
*/
- at91_set_pio_pulldown(AT91_PIO_PORTC, 4, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 5, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 6, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 7, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 8, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 9, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 10, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 11, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 12, 0);
- at91_set_pio_pulldown(AT91_PIO_PORTC, 13, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 4, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 5, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 6, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 7, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 8, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 9, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 10, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 11, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 12, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 13, 0);
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_MCI0);
#ifdef CONFIG_MACB
void vinco_macb0_hw_init(void)
{
- at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
- at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
- at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
- at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
- at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
- at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_GMAC0);
static void vinco_serial3_hw_init(void)
{
- at91_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */
- at91_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_USART3);
/*************************************************************************
*
- * initdram -- 440EPx's DDR controller is a DENALI Core
+ * dram_init -- 440EPx's DDR controller is a DENALI Core
*
************************************************************************/
-int initdram(void)
+int dram_init(void)
{
/* CL=4 */
mtsdram(DDR0_02, 0x00000000);
--- /dev/null
+if TARGET_MX6LOGICPD
+
+config SYS_BOARD
+ default "imx6"
+
+config SYS_VENDOR
+ default "logicpd"
+
+config SYS_CONFIG_NAME
+ default "imx6_logic"
+
+endif
--- /dev/null
+MX6LOGICPD BOARD
+M: Adam Ford <aford173@gmail.com>
+S: Maintained
+F: board/logicpd/imx6/
+F: include/configs/imx6_logic.h
+F: configs/imx6q_logic_defconfig
--- /dev/null
+#
+# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := imx6logic.o
+
--- /dev/null
+U-Boot for LogicPD i.MX6 Development Kit
+----------------------------------------
+
+This file contains information for the port of U-Boot to the Logic PD Development kit.
+
+Logic PD has an i.MX6 System On Module (SOM) and a correspondong development
+board. SOM has a built-in microSD socket, DDR and NAND flash. The development kit has
+an SMSC Ethernet PHY, serial debug port and a variety of peripherals.
+
+On the intial release, the SOM came with either an i.MX6D or i.MX6Q.
+
+For more details about Logic PD i.MX6 Development kit, visit:
+https://www.logicpd.com/
+
+Building U-Boot for Logic PD Development Kit
+--------------------------------------------
+To build U-Boot for the Dual and Quad variants:
+
+ make imx6q_logic_defconfig
+ make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux-
+
+
+Flashing U-Boot into the SD card
+--------------------------------
+
+See README.imximage for details on booting from SD
+
+Flashing U-Boot into NAND
+-------------------------
+Once in Linux with MTD support for the NAND on /dev/mtd0, program U-Boot with the following:
+with:
+
+ kobs-ng init -v -x u-boot-dtb.imx
+
+Additional Support Documentation can be found at:
+https://support.logicpd.com/
+
--- /dev/null
+/*
+ * Copyright (C) 2017 Logic PD, Inc.
+ *
+ * Author: Adam Ford <aford173@gmail.com>
+ *
+ * Based on SabreSD by Fabio Estevam <fabio.estevam@nxp.com>
+ * and updates by Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/sizes.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/iomux-v3.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define NAND_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+ gd->ram_size = imx_ddr_size();
+ return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+ MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const uart2_pads[] = {
+ MX6_PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_SD4_DAT5__UART2_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_SD4_DAT6__UART2_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const uart3_pads[] = {
+ MX6_PAD_EIM_D23__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_EIM_EB3__UART3_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static void fixup_enet_clock(void)
+{
+ struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ struct gpio_desc nint;
+ struct gpio_desc reset;
+ int ret;
+
+ /* Set Ref Clock to 50 MHz */
+ enable_fec_anatop_clock(0, ENET_50MHZ);
+
+ /* Set GPIO_16 as ENET_REF_CLK_OUT */
+ setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
+
+ /* Request GPIO Pins to reset Ethernet with new clock */
+ ret = dm_gpio_lookup_name("GPIO4_7", &nint);
+ if (ret) {
+ printf("Unable to lookup GPIO4_7\n");
+ return;
+ }
+
+ ret = dm_gpio_request(&nint, "eth0_nInt");
+ if (ret) {
+ printf("Unable to request eth0_nInt\n");
+ return;
+ }
+
+ /* Ensure nINT is input or PHY won't startup */
+ dm_gpio_set_dir_flags(&nint, GPIOD_IS_IN);
+
+ ret = dm_gpio_lookup_name("GPIO4_9", &reset);
+ if (ret) {
+ printf("Unable to lookup GPIO4_9\n");
+ return;
+ }
+
+ ret = dm_gpio_request(&reset, "eth0_reset");
+ if (ret) {
+ printf("Unable to request eth0_reset\n");
+ return;
+ }
+
+ /* Reset LAN8710A PHY */
+ dm_gpio_set_dir_flags(&reset, GPIOD_IS_OUT);
+ dm_gpio_set_value(&reset, 0);
+ udelay(150);
+ dm_gpio_set_value(&reset, 1);
+ mdelay(50);
+}
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+ imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
+ imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
+}
+
+static iomux_v3_cfg_t const nand_pads[] = {
+ MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
+ MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
+};
+
+static void setup_nand_pins(void)
+{
+ imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
+int board_early_init_f(void)
+{
+ fixup_enet_clock();
+ setup_iomux_uart();
+ setup_nand_pins();
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ return 0;
+}
+
+int board_late_init(void)
+{
+ setenv("board_name", "imx6logic");
+
+ if (is_mx6dq()) {
+ setenv("board_rev", "MX6DQ");
+ setenv("fdt_file", "imx6q-logicpd.dtb");
+ }
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2017 Logic PD, Inc.
+ * Adam Ford <aford173@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#include <asm/imx-common/imximage.cfg>
+
+/* image version */
+IMAGE_VERSION 2
+
+BOOT_OFFSET FLASH_OFFSET_STANDARD
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch-mx6/mx6-ddr.h"
+#include "asm/arch-mx6/iomux.h"
+#include "asm/arch-mx6/crm_regs.h"
+
+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000030
+DATA 4, MX6_IOM_DRAM_CAS, 0x00000030
+DATA 4, MX6_IOM_DRAM_RAS, 0x00000030
+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
+DATA 4, MX6_IOM_DRAM_RESET, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000030
+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
+DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
+DATA 4, MX6_IOM_DRAM_DQM0, 0x00000030
+DATA 4, MX6_IOM_DRAM_DQM1, 0x00000030
+DATA 4, MX6_IOM_DRAM_DQM2, 0x00000030
+DATA 4, MX6_IOM_DRAM_DQM3, 0x00000030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002D003A
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0038002B
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x03340338
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x0334032C
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4036383C
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x2E384038
+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036
+DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040
+DATA 4, MX6_MMDC_P0_MDCFG0, 0xB8BE7955
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xFF328F64
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDMISC, 0x00011740
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x00BE1023
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000047
+DATA 4, MX6_MMDC_P0_MDCTL, 0x85190000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00888032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x19408030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000007
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+
+/* set the default clock gate to save power */
+DATA 4, CCM_CCGR0, 0x00C03F3F
+DATA 4, CCM_CCGR1, 0x0030FC03
+DATA 4, CCM_CCGR2, 0x0FFFC000
+DATA 4, CCM_CCGR3, 0x3FF00000
+DATA 4, CCM_CCGR4, 0xFFFFF300
+DATA 4, CCM_CCGR5, 0x0F0000F3
+DATA 4, CCM_CCGR6, 0x00000FFF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4 MX6_IOMUXC_GPR4 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4 MX6_IOMUXC_GPR6 0x007F007F
+DATA 4 MX6_IOMUXC_GPR7 0x007F007F
* SDRAM is already configured by the bootstrap code, only return the
* auto-detected size here
*/
-int initdram(void)
+int dram_init(void)
{
gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_MBYTES_SDRAM << 20);
/*
* Initalize SDRAM - configure SDRAM controller, detect memory size.
*/
-int initdram(void)
+int dram_init(void)
{
ulong dramsize = 0;
#ifndef CONFIG_SYS_RAMBOOT
return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize);
}
-int initdram(void)
+int dram_init(void)
{
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize;
/* ------------------------------------------------------------------------- */
/* ------------------------------------------------------------------------- */
/*
- initdram() reads EEPROM via I2c. EEPROM contains all of
+ dram_init() reads EEPROM via I2c. EEPROM contains all of
the necessary info for SDRAM controller configuration
*/
/* ------------------------------------------------------------------------- */
/* ------------------------------------------------------------------------- */
static int test_dram (unsigned long ramsize);
-int initdram(void)
+int dram_init(void)
{
unsigned long bank_reg[4], tmp, bank_size;
/*
* Get RAM size.
*/
-int initdram(void)
+int dram_init(void)
{
unsigned char board_rev;
unsigned long reg;
/* ------------------------------------------------------------------------- */
/* ------------------------------------------------------------------------- */
/*
- initdram() reads EEPROM via I2c. EEPROM contains all of
+ dram_init() reads EEPROM via I2c. EEPROM contains all of
the necessary info for SDRAM controller configuration
*/
/* ------------------------------------------------------------------------- */
/* ------------------------------------------------------------------------- */
static int test_dram (unsigned long ramsize);
-int initdram(void)
+int dram_init(void)
{
unsigned long bank_reg[4], tmp, bank_size;
int i, ds;
#endif
/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
+ * ATTENTION: Although partially referenced dram_init does NOT make real use
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
-int initdram(void)
+int dram_init(void)
{
ulong dramsize = 0;
ulong dramsize2 = 0;
DECLARE_GLOBAL_DATA_PTR;
-int initdram(void)
+int dram_init(void)
{
/* Sdram is setup by assembler code */
/* If memory could be changed, we should return the true value here */
},
};
-int initdram(void)
+int dram_init(void)
{
int i;
u32 msize = 0;
#endif
/*
- * ATTENTION: Although partially referenced initdram does NOT make
+ * ATTENTION: Although partially referenced dram_init does NOT make
* real use of CONFIG_SYS_SDRAM_BASE. The code does not
* work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
-int initdram(void)
+int dram_init(void)
{
volatile struct mpc5xxx_mmap_ctl *mm =
(struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;
DECLARE_GLOBAL_DATA_PTR;
-int initdram(void)
+int dram_init(void)
{
/* Sdram is setup by assembler code */
/* If memory could be changed, we should return the true value here */
#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
-int initdram(void)
+int dram_init(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = 0;
return 0;
}
-int initdram(void)
+int dram_init(void)
{
long dram_size = 0;
}
/*
- * in initdram we are here executing from flash
+ * in dram_init we are here executing from flash
* case 1:
* is with no ACR/flash cache enabled
* nop = 40ns (scope measured)
asm volatile ("nop");
}
-int initdram(void)
+int dram_init(void)
{
u32 dramsize, RC;
#endif
/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
+ * ATTENTION: Although partially referenced dram_init does NOT make real use
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
-int initdram(void)
+int dram_init(void)
{
ulong dramsize = 0;
ulong dramsize2 = 0;
/**************************************************************************
* DRAM initalization and size detection
*/
-int initdram(void)
+int dram_init(void)
{
long bank_size;
long size;
/* ------------------------------------------------------------------------- */
-int initdram(void)
+int dram_init(void)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
#endif /* !CONFIG_SYS_RAMBOOT */
-int initdram(void)
+int dram_init(void)
{
ulong dramsize = 0;
ulong dramsize2 = 0;
popts->ddr_cdr1 = DDR_CDR1_DHC_EN;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size;
return msize;
}
-int initdram(void)
+int dram_init(void)
{
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile fsl_lbc_t *lbc = &im->im_lbc;
return 0;
}
-int initdram(void)
+int dram_init(void)
{
gd->ram_size = spd_sdram();
return 0;
}
-int initdram(void)
+int dram_init(void)
{
phys_size_t dram_size = fsl_ddr_sdram();
return 0;
}
-int initdram(void)
+int dram_init(void)
{
gd->ram_size = get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024);
return 0;
}
-int initdram(void)
+int dram_init(void)
{
gd->ram_size = get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024);
#include <common.h>
#include <command.h>
#include <environment.h>
-#include <aes.h>
+#include <uboot_aes.h>
#include <malloc.h>
#include <asm/byteorder.h>
#include <linux/compiler.h>
if (argc != 2)
return CMD_RET_USAGE;
- val = simple_strtoul(argv[2], NULL, 16);
+ val = simple_strtoul(argv[1], NULL, 16);
mmc = find_mmc_device(curr_device);
if (!mmc) {
return 0;
}
+#ifdef CONFIG_DM_PCI
+static const struct pci_flag_info {
+ uint flag;
+ const char *name;
+} pci_flag_info[] = {
+ { PCI_REGION_IO, "io" },
+ { PCI_REGION_PREFETCH, "prefetch" },
+ { PCI_REGION_SYS_MEMORY, "sysmem" },
+ { PCI_REGION_RO, "readonly" },
+ { PCI_REGION_IO, "io" },
+};
+
+static void pci_show_regions(struct udevice *bus)
+{
+ struct pci_controller *hose = dev_get_uclass_priv(bus);
+ const struct pci_region *reg;
+ int i, j;
+
+ if (!hose) {
+ printf("Bus '%s' is not a PCI controller\n", bus->name);
+ return;
+ }
+
+ printf("# %-16s %-16s %-16s %s\n", "Bus start", "Phys start", "Size",
+ "Flags");
+ for (i = 0, reg = hose->regions; i < hose->region_count; i++, reg++) {
+ printf("%d %#016llx %#016llx %#016llx ", i,
+ (unsigned long long)reg->bus_start,
+ (unsigned long long)reg->phys_start,
+ (unsigned long long)reg->size);
+ if (!(reg->flags & PCI_REGION_TYPE))
+ printf("mem ");
+ for (j = 0; j < ARRAY_SIZE(pci_flag_info); j++) {
+ if (reg->flags & pci_flag_info[j].flag)
+ printf("%s ", pci_flag_info[j].name);
+ }
+ printf("\n");
+ }
+}
+#endif
+
/* PCI Configuration Space access commands
*
* Syntax:
pci_init();
return 0;
#endif
+ case 'r': /* no break */
default: /* scan bus */
value = 1; /* short listing */
if (argc > 1) {
- if (argv[argc-1][0] == 'l') {
+ if (cmd != 'r' && argv[argc-1][0] == 'l') {
value = 0;
argc--;
}
printf("No such bus\n");
return CMD_RET_FAILURE;
}
- pciinfo(bus, value);
+ if (cmd == 'r')
+ pci_show_regions(bus);
+ else
+ pciinfo(bus, value);
#else
pciinfo(busnum, value);
#endif
#ifdef CONFIG_DM_PCI
"pci bar b.d.f\n"
" - show BARs base and size for device b.d.f'\n"
+ "pci regions\n"
+ " - show PCI regions\n"
#endif
"pci display[.b, .w, .l] b.d.f [address] [# of objects]\n"
" - display PCI configuration space (CFG)\n"
return 0;
}
-#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_M68K)
-static int init_func_ram(void)
-{
- return initdram();
-}
-#endif
-
static int show_dram_config(void)
{
unsigned long long size;
init_func_spi,
#endif
announce_dram_init,
- /* TODO: unify all these dram functions? */
-#if defined(CONFIG_ARM) || defined(CONFIG_X86) || defined(CONFIG_NDS32) || \
- defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32) || \
- defined(CONFIG_SH)
dram_init, /* configure available RAM banks */
-#endif
-#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_M68K)
- init_func_ram,
-#endif
#ifdef CONFIG_POST
post_init_f,
#endif
}
#ifdef CONFIG_ENV_AES
-#include <aes.h>
+#include <uboot_aes.h>
/**
* env_aes_cbc_get_key() - Get AES-128-CBC key for the environment
*
#ifdef USE_HOSTCC /* Eliminate "ANSI does not permit..." warnings */
#include <stdint.h>
#include <stdio.h>
+#include "fw_env_private.h"
#include "fw_env.h"
#include <env_attr.h>
#include <env_flags.h>
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_UBI=y
CONFIG_DM=y
+CONFIG_PHYLIB=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_PCI=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_GW_VENTANA=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_VIDEO=y
+CONFIG_SPL_STACK_R_ADDR=0x18000000
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
+CONFIG_BOOTDELAY=3
+# CONFIG_SYS_STDIO_DEREGISTER is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_DMA_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Ventana > "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_UBI=y
+CONFIG_DM=y
+CONFIG_PHYLIB=y
+CONFIG_MV88E61XX_SWITCH=y
+CONFIG_MV88E61XX_CPU_PORT=5
+CONFIG_MV88E61XX_PHY_PORTS=0xf
+CONFIG_MV88E61XX_FIXED_PORTS=0x0
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Gateworks"
+CONFIG_G_DNL_VENDOR_NUM=0x0525
+CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_OF_LIBFDT=y
+CONFIG_FDT_FIXUP_PARTITIONS=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_UBI=y
CONFIG_DM=y
+CONFIG_PHYLIB=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_PCI=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
-CONFIG_BOARD_LATE_INIT=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
-CONFIG_BOARD_LATE_INIT=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TARGET_MX6LOGICPD=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-logicpd"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg,MX6Q"
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="i.MX6 Logic # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+# CONFIG_BLK is not set
+CONFIG_SYS_I2C_MXC=y
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_NAND_MXS=y
+CONFIG_FEC_MXC=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR_PFUZE100=y
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
-CONFIG_BOARD_LATE_INIT=y
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
-CONFIG_BOARD_LATE_INIT=y
CONFIG_SYS_I2C_MXC=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
-CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_VIDEO=y
CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/denx/m53evk/imximage.cfg"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aries/m53evk/imximage.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_TARGET_MX6SLEVK=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL"
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_TARGET_MX6SLEVK=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_BOOT_SPINOR"
+CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL"
+CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6SL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6SL,SYS_I2C"
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_OF_CONTROL=y
CONFIG_NET_RANDOM_ETHADDR=y
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_CMD_MMC=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_PINCTRL=y
CONFIG_REGULATOR_ACT8846=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_RAM=y
+# CONFIG_TPL_DM_SERIAL is not set
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_BASE=0x20064000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_FIT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained"
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
+CONFIG_SPL_SEPARATE_BSS=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas"
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_AT91_H32MX=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfc00c000
+CONFIG_DEBUG_UART_CLOCK=88000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_OF_LIBFDT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_FIT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained"
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas"
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_AT91_H32MX=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfc00c000
+CONFIG_DEBUG_UART_CLOCK=88000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_OF_LIBFDT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained"
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH"
CONFIG_BOOTDELAY=3
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas"
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_AT91_H32MX=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfc00c000
+CONFIG_DEBUG_UART_CLOCK=88000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_OF_LIBFDT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek"
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
+CONFIG_SPL_SEPARATE_BSS=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas"
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_AT91_H32MX=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfc00c000
+CONFIG_DEBUG_UART_CLOCK=88000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek"
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas"
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_AT91_H32MX=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfc00c000
+CONFIG_DEBUG_UART_CLOCK=88000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek"
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH"
CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas"
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_AT91_H32MX=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfc00c000
+CONFIG_DEBUG_UART_CLOCK=88000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y
Disable : 15, 14
11) Create DDR's TLB entriy
- Location : Board_init_f -> init_func_ram -> initdram
+ Location : Board_init_f -> dram_init
TLB entry : Search free TLB entry
12) Update Flash's TLB entry
Examples:
-1. For building U-Boot for Denx M28EVK board:
+1. For building U-Boot for Aries M28EVK board:
$ make m28evk_config
if (flags & DM_FLAG_ALLOC_PRIV_DMA) {
priv = memalign(ARCH_DMA_MINALIGN, size);
- if (priv)
+ if (priv) {
memset(priv, '\0', size);
+
+ /*
+ * Ensure that the zero bytes are flushed to memory.
+ * This prevents problems if the driver uses this as
+ * both an input and an output buffer:
+ *
+ * 1. Zeroes written to buffer (here) and sit in the
+ * cache
+ * 2. Driver issues a read command to DMA
+ * 3. CPU runs out of cache space and evicts some cache
+ * data in the buffer, writing zeroes to RAM from
+ * the memset() above
+ * 4. DMA completes
+ * 5. Buffer now has some DMA data and some zeroes
+ * 6. Data being read is now incorrect
+ *
+ * To prevent this, ensure that the cache is clean
+ * within this range at the start. The driver can then
+ * use normal flush-after-write, invalidate-before-read
+ * procedures.
+ *
+ * TODO(sjg@chromium.org): Drop this microblaze
+ * exception.
+ */
+#ifndef CONFIG_MICROBLAZE
+ flush_dcache_range((ulong)priv, (ulong)priv + size);
+#endif
+ }
} else {
priv = calloc(1, size);
}
return ret;
list_for_each_entry(dev, &uc->dev_head, uclass_node) {
- debug(" - %d %d\n", dev->req_seq, dev->seq);
+ debug(" - %d %d '%s'\n", dev->req_seq, dev->seq, dev->name);
if ((find_req_seq ? dev->req_seq : dev->seq) ==
seq_or_req_seq) {
*devp = dev;
print_size(total_memory, " of memory\n");
printf(" This U-Boot only supports < 4G of DDR\n");
printf(" You could rebuild it with CONFIG_PHYS_64BIT\n");
- printf(" "); /* re-align to match init_func_ram print */
+ printf(" "); /* re-align to match init_dram print */
total_memory = CONFIG_MAX_MEM_MAPPED;
}
#endif
/*
* fsl_ddr_sdram(void) -- this is the main function to be
- * called by initdram() in the board file.
+ * called by dram_init() in the board file.
*
* It returns amount of memory configured in bytes.
*/
help
Support for the Designware APB GPIO driver.
+config AT91_GPIO
+ bool "AT91 PIO GPIO driver"
+ depends on DM_GPIO
+ default n
+ help
+ Say yes here to select AT91 PIO GPIO driver. AT91 PIO
+ controller manages up to 32 fully programmable input/output
+ lines. Each I/O line may be dedicated as a general-purpose
+ I/O or be assigned to a function of an embedded peripheral.
+ The assignment to a function of an embedded peripheral is
+ the responsibility of AT91 Pinctrl driver. This driver is
+ responsible for the general-purpose I/O.
+
config ATMEL_PIO4
bool "ATMEL PIO4 driver"
depends on DM_GPIO
#include <config.h>
#include <common.h>
+#include <clk.h>
#include <dm.h>
#include <asm/io.h>
#include <linux/sizes.h>
{
struct at91_port *at91_port = at91_pio_get_port(port);
-#if defined(CPU_HAS_PIO3)
- if (use_pullup)
- at91_set_pio_pulldown(port, pin, 0);
-#endif
-
if (at91_port && (pin < GPIO_PER_BANK))
at91_set_port_pullup(at91_port, pin, use_pullup);
mask = 1 << pin;
writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
-#if defined(CPU_HAS_PIO3)
- writel(readl(&at91_port->abcdsr1) & ~mask,
- &at91_port->abcdsr1);
- writel(readl(&at91_port->abcdsr2) & ~mask,
- &at91_port->abcdsr2);
-#else
- writel(mask, &at91_port->asr);
-#endif
+ writel(mask, &at91_port->mux.pio2.asr);
writel(mask, &at91_port->pdr);
}
mask = 1 << pin;
writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
-#if defined(CPU_HAS_PIO3)
- writel(readl(&at91_port->abcdsr1) | mask,
- &at91_port->abcdsr1);
- writel(readl(&at91_port->abcdsr2) & ~mask,
- &at91_port->abcdsr2);
-#else
- writel(mask, &at91_port->bsr);
-#endif
+ writel(mask, &at91_port->mux.pio2.bsr);
writel(mask, &at91_port->pdr);
}
return 0;
}
-#if defined(CPU_HAS_PIO3)
+/*
+ * mux the pin to the "A" internal peripheral role.
+ */
+int at91_pio3_set_a_periph(unsigned port, unsigned pin, int use_pullup)
+{
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
+
+ if (at91_port && (pin < GPIO_PER_BANK)) {
+ mask = 1 << pin;
+ writel(mask, &at91_port->idr);
+ at91_set_pio_pullup(port, pin, use_pullup);
+ writel(readl(&at91_port->mux.pio3.abcdsr1) & ~mask,
+ &at91_port->mux.pio3.abcdsr1);
+ writel(readl(&at91_port->mux.pio3.abcdsr2) & ~mask,
+ &at91_port->mux.pio3.abcdsr2);
+
+ writel(mask, &at91_port->pdr);
+ }
+
+ return 0;
+}
+
+/*
+ * mux the pin to the "B" internal peripheral role.
+ */
+int at91_pio3_set_b_periph(unsigned port, unsigned pin, int use_pullup)
+{
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
+
+ if (at91_port && (pin < GPIO_PER_BANK)) {
+ mask = 1 << pin;
+ writel(mask, &at91_port->idr);
+ at91_set_pio_pullup(port, pin, use_pullup);
+ writel(readl(&at91_port->mux.pio3.abcdsr1) | mask,
+ &at91_port->mux.pio3.abcdsr1);
+ writel(readl(&at91_port->mux.pio3.abcdsr2) & ~mask,
+ &at91_port->mux.pio3.abcdsr2);
+
+ writel(mask, &at91_port->pdr);
+ }
+
+ return 0;
+}
/*
* mux the pin to the "C" internal peripheral role.
*/
-int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup)
+int at91_pio3_set_c_periph(unsigned port, unsigned pin, int use_pullup)
{
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
mask = 1 << pin;
writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
- writel(readl(&at91_port->abcdsr1) & ~mask,
- &at91_port->abcdsr1);
- writel(readl(&at91_port->abcdsr2) | mask,
- &at91_port->abcdsr2);
+ writel(readl(&at91_port->mux.pio3.abcdsr1) & ~mask,
+ &at91_port->mux.pio3.abcdsr1);
+ writel(readl(&at91_port->mux.pio3.abcdsr2) | mask,
+ &at91_port->mux.pio3.abcdsr2);
writel(mask, &at91_port->pdr);
}
/*
* mux the pin to the "D" internal peripheral role.
*/
-int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup)
+int at91_pio3_set_d_periph(unsigned port, unsigned pin, int use_pullup)
{
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
mask = 1 << pin;
writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
- writel(readl(&at91_port->abcdsr1) | mask,
- &at91_port->abcdsr1);
- writel(readl(&at91_port->abcdsr2) | mask,
- &at91_port->abcdsr2);
+ writel(readl(&at91_port->mux.pio3.abcdsr1) | mask,
+ &at91_port->mux.pio3.abcdsr1);
+ writel(readl(&at91_port->mux.pio3.abcdsr2) | mask,
+ &at91_port->mux.pio3.abcdsr2);
writel(mask, &at91_port->pdr);
}
return 0;
}
-#endif
#ifdef CONFIG_DM_GPIO
static bool at91_get_port_output(struct at91_port *at91_port, int offset)
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
+ if (at91_port && (pin < GPIO_PER_BANK)) {
+ mask = 1 << pin;
+ if (is_on)
+ writel(mask, &at91_port->ifer);
+ else
+ writel(mask, &at91_port->ifdr);
+ }
+
+ return 0;
+}
+
+/*
+ * enable/disable the glitch filter. mostly used with IRQ handling.
+ */
+int at91_pio3_set_pio_deglitch(unsigned port, unsigned pin, int is_on)
+{
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
+
if (at91_port && (pin < GPIO_PER_BANK)) {
mask = 1 << pin;
if (is_on) {
-#if defined(CPU_HAS_PIO3)
- writel(mask, &at91_port->ifscdr);
-#endif
+ writel(mask, &at91_port->mux.pio3.ifscdr);
writel(mask, &at91_port->ifer);
} else {
writel(mask, &at91_port->ifdr);
return 0;
}
-#if defined(CPU_HAS_PIO3)
/*
* enable/disable the debounce filter.
*/
-int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div)
+int at91_pio3_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div)
{
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
if (at91_port && (pin < GPIO_PER_BANK)) {
mask = 1 << pin;
if (is_on) {
- writel(mask, &at91_port->ifscer);
- writel(div & PIO_SCDR_DIV, &at91_port->scdr);
+ writel(mask, &at91_port->mux.pio3.ifscer);
+ writel(div & PIO_SCDR_DIV, &at91_port->mux.pio3.scdr);
writel(mask, &at91_port->ifer);
} else {
writel(mask, &at91_port->ifdr);
* enable/disable the pull-down.
* If pull-up already enabled while calling the function, we disable it.
*/
-int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on)
+int at91_pio3_set_pio_pulldown(unsigned port, unsigned pin, int is_on)
{
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
mask = 1 << pin;
if (is_on) {
at91_set_pio_pullup(port, pin, 0);
- writel(mask, &at91_port->ppder);
+ writel(mask, &at91_port->mux.pio3.ppder);
} else
- writel(mask, &at91_port->ppddr);
+ writel(mask, &at91_port->mux.pio3.ppddr);
}
return 0;
}
+int at91_pio3_set_pio_pullup(unsigned port, unsigned pin, int use_pullup)
+{
+ struct at91_port *at91_port = at91_pio_get_port(port);
+
+ if (use_pullup)
+ at91_pio3_set_pio_pulldown(port, pin, 0);
+
+ if (at91_port && (pin < GPIO_PER_BANK))
+ at91_set_port_pullup(at91_port, pin, use_pullup);
+
+ return 0;
+}
+
/*
* disable Schmitt trigger
*/
-int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin)
+int at91_pio3_set_pio_disable_schmitt_trig(unsigned port, unsigned pin)
{
struct at91_port *at91_port = at91_pio_get_port(port);
u32 mask;
return 0;
}
-#endif
/*
* enable/disable the multi-driver. This is only valid for output and
struct at91_port_priv *port = dev_get_priv(dev);
struct at91_port_platdata *plat = dev_get_platdata(dev);
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct clk clk;
+ int ret;
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(&clk);
+ if (ret)
+ return ret;
+
+ clk_free(&clk);
uc_priv->bank_name = plat->bank_name;
uc_priv->gpio_count = GPIO_PER_BANK;
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+ plat->base_addr = (uint32_t)dev_get_addr_ptr(dev);
+#endif
port->regs = (struct at91_port *)plat->base_addr;
return 0;
}
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+static const struct udevice_id at91_gpio_ids[] = {
+ { .compatible = "atmel,at91rm9200-gpio" },
+ { }
+};
+#endif
+
U_BOOT_DRIVER(gpio_at91) = {
.name = "gpio_at91",
.id = UCLASS_GPIO,
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+ .of_match = at91_gpio_ids,
+ .platdata_auto_alloc_size = sizeof(struct at91_port_platdata),
+#endif
.ops = &gpio_at91_ops,
.probe = at91_gpio_probe,
.priv_auto_alloc_size = sizeof(struct at91_port_priv),
Synopsys DesignWare Memory Card Interface driver. Select this option
for platforms based on Altera SOCFPGA.
+config MMC_MESON_GX
+ bool "Meson GX EMMC controller support"
+ depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_MESON
+ help
+ Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
+
config MMC_MXC
bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
help
This selects support for the SD/MMC Host Controller on
Allwinner sunxi SoCs.
+config GENERIC_ATMEL_MCI
+ bool "Atmel Multimedia Card Interface support"
+ depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
+ help
+ This enables support for Atmel High Speed Multimedia Card Interface
+ (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
+ the SD Memory Card Specification V2.0, the SDIO V2.0 specification
+ and CE-ATA V1.1.
+
endif
config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
obj-$(CONFIG_GENERIC_MMC) += mmc_boot.o
endif
obj-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
+obj-$(CONFIG_MMC_MESON_GX) += meson_gx_mmc.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o
obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
/* 400KHz is max freq for card ID etc. Use that as min */
#define MIN_FREQ 400000
+#define SDHCI_BUFFER 0x20
struct bcm2835_sdhci_host {
struct sdhci_host host;
* (Which is just as well - otherwise we'd have to nobble the DMA engine
* too)
*/
- while (timer_get_us() - bcm_host->last_write < bcm_host->twoticks_delay)
- ;
+ if (reg != SDHCI_BUFFER) {
+ while (timer_get_us() - bcm_host->last_write <
+ bcm_host->twoticks_delay)
+ ;
+ }
writel(val, host->ioaddr + reg);
bcm_host->last_write = timer_get_us();
*/
#include <common.h>
+#include <clk.h>
#include <mmc.h>
#include <part.h>
#include <malloc.h>
#include <asm/byteorder.h>
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
+#include <dm/device.h>
#include "atmel_mci.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#ifndef CONFIG_SYS_MMC_CLK_OD
# define CONFIG_SYS_MMC_CLK_OD 150000
#endif
struct atmel_mci *mci;
unsigned int initialized:1;
unsigned int curr_clk;
+#ifdef CONFIG_DM_MMC
+ struct mmc mmc;
+ ulong bus_clk_rate;
+#endif
};
/* Read Atmel MCI IP version */
}
/* Setup for MCI Clock and Block Size */
+#ifdef CONFIG_DM_MMC
+static void mci_set_mode(struct atmel_mci_priv *priv, u32 hz, u32 blklen)
+{
+ struct mmc *mmc = &priv->mmc;
+ u32 bus_hz = priv->bus_clk_rate;
+#else
static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen)
{
struct atmel_mci_priv *priv = mmc->priv;
- atmel_mci_t *mci = priv->mci;
u32 bus_hz = get_mci_clk_rate();
+#endif
+
+ atmel_mci_t *mci = priv->mci;
u32 clkdiv = 255;
unsigned int version = atmel_mci_get_version(mci);
u32 clkodd = 0;
* Sends a command out on the bus and deals with the block data.
* Takes the mmc pointer, a command pointer, and an optional data pointer.
*/
+#ifdef CONFIG_DM_MMC
+static int atmel_mci_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct atmel_mci_priv *priv = dev_get_priv(dev);
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+#else
static int
mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
{
struct atmel_mci_priv *priv = mmc->priv;
+#endif
atmel_mci_t *mci = priv->mci;
u32 cmdr;
u32 error_flags = 0;
return 0;
}
+#ifdef CONFIG_DM_MMC
+static int atmel_mci_set_ios(struct udevice *dev)
+{
+ struct atmel_mci_priv *priv = dev_get_priv(dev);
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+#else
/* Entered into mmc structure during driver init */
static int mci_set_ios(struct mmc *mmc)
{
struct atmel_mci_priv *priv = mmc->priv;
+#endif
atmel_mci_t *mci = priv->mci;
int bus_width = mmc->bus_width;
unsigned int version = atmel_mci_get_version(mci);
int busw;
/* Set the clock speed */
+#ifdef CONFIG_DM_MMC
+ mci_set_mode(priv, mmc->clock, MMC_DEFAULT_BLKLEN);
+#else
mci_set_mode(mmc, mmc->clock, MMC_DEFAULT_BLKLEN);
+#endif
/*
* set the bus width and select slot for this interface
return 0;
}
+#ifdef CONFIG_DM_MMC
+static int atmel_mci_hw_init(struct atmel_mci_priv *priv)
+{
+#else
/* Entered into mmc structure during driver init */
static int mci_init(struct mmc *mmc)
{
struct atmel_mci_priv *priv = mmc->priv;
+#endif
atmel_mci_t *mci = priv->mci;
/* Initialize controller */
writel(~0UL, &mci->idr);
/* Set default clocks and blocklen */
+#ifdef CONFIG_DM_MMC
+ mci_set_mode(priv, CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);
+#else
mci_set_mode(mmc, CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);
+#endif
return 0;
}
+#ifndef CONFIG_DM_MMC
static const struct mmc_ops atmel_mci_ops = {
.send_cmd = mci_send_cmd,
.set_ios = mci_set_ios,
return 0;
}
+#endif
+
+#ifdef CONFIG_DM_MMC
+static const struct dm_mmc_ops atmel_mci_mmc_ops = {
+ .send_cmd = atmel_mci_send_cmd,
+ .set_ios = atmel_mci_set_ios,
+};
+
+static void atmel_mci_setup_cfg(struct atmel_mci_priv *priv)
+{
+ struct mmc_config *cfg;
+ u32 version;
+
+ cfg = &priv->cfg;
+ cfg->name = "Atmel mci";
+ cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ /*
+ * If the version is above 3.0, the capabilities of the 8-bit
+ * bus width and high speed are supported.
+ */
+ version = atmel_mci_get_version(priv->mci);
+ if ((version & 0xf00) >= 0x300) {
+ cfg->host_caps = MMC_MODE_8BIT |
+ MMC_MODE_HS | MMC_MODE_HS_52MHz;
+ }
+
+ cfg->host_caps |= MMC_MODE_4BIT;
+ cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+ cfg->f_min = priv->bus_clk_rate / (2 * 256);
+ cfg->f_max = priv->bus_clk_rate / 2;
+}
+
+static int atmel_mci_enable_clk(struct udevice *dev)
+{
+ struct atmel_mci_priv *priv = dev_get_priv(dev);
+ struct clk clk;
+ ulong clk_rate;
+ int ret = 0;
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret) {
+ ret = -EINVAL;
+ goto failed;
+ }
+
+ ret = clk_enable(&clk);
+ if (ret)
+ goto failed;
+
+ clk_rate = clk_get_rate(&clk);
+ if (!clk_rate) {
+ ret = -EINVAL;
+ goto failed;
+ }
+
+ priv->bus_clk_rate = clk_rate;
+
+failed:
+ clk_free(&clk);
+
+ return ret;
+}
+
+static int atmel_mci_probe(struct udevice *dev)
+{
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct atmel_mci_priv *priv = dev_get_priv(dev);
+ struct mmc *mmc;
+ int ret;
+
+ ret = atmel_mci_enable_clk(dev);
+ if (ret)
+ return ret;
+
+ priv->mci = (struct atmel_mci *)dev_get_addr_ptr(dev);
+
+ atmel_mci_setup_cfg(priv);
+
+ mmc = &priv->mmc;
+ mmc->cfg = &priv->cfg;
+ mmc->dev = dev;
+ upriv->mmc = mmc;
+
+ atmel_mci_hw_init(priv);
+
+ return 0;
+}
+
+static int atmel_mci_bind(struct udevice *dev)
+{
+ struct atmel_mci_priv *priv = dev_get_priv(dev);
+
+ return mmc_bind(dev, &priv->mmc, &priv->cfg);
+}
+
+static const struct udevice_id atmel_mci_ids[] = {
+ { .compatible = "atmel,hsmci" },
+ { }
+};
+
+U_BOOT_DRIVER(atmel_mci) = {
+ .name = "atmel-mci",
+ .id = UCLASS_MMC,
+ .of_match = atmel_mci_ids,
+ .bind = atmel_mci_bind,
+ .probe = atmel_mci_probe,
+ .priv_auto_alloc_size = sizeof(struct atmel_mci_priv),
+ .ops = &atmel_mci_mmc_ops,
+};
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2016 Carlo Caione <carlo@caione.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <asm/io.h>
+#include <asm/arch/sd_emmc.h>
+#include <dm/device.h>
+#include <linux/log2.h>
+
+static inline void *get_regbase(const struct mmc *mmc)
+{
+ struct meson_mmc_platdata *pdata = mmc->priv;
+
+ return pdata->regbase;
+}
+
+static inline uint32_t meson_read(struct mmc *mmc, int offset)
+{
+ return readl(get_regbase(mmc) + offset);
+}
+
+static inline void meson_write(struct mmc *mmc, uint32_t val, int offset)
+{
+ writel(val, get_regbase(mmc) + offset);
+}
+
+static void meson_mmc_config_clock(struct mmc *mmc)
+{
+ uint32_t meson_mmc_clk = 0;
+ unsigned int clk, clk_src, clk_div;
+
+ /* 1GHz / CLK_MAX_DIV = 15,9 MHz */
+ if (mmc->clock > 16000000) {
+ clk = SD_EMMC_CLKSRC_DIV2;
+ clk_src = CLK_SRC_DIV2;
+ } else {
+ clk = SD_EMMC_CLKSRC_24M;
+ clk_src = CLK_SRC_24M;
+ }
+ clk_div = DIV_ROUND_UP(clk, mmc->clock);
+
+ /* 180 phase core clock */
+ meson_mmc_clk |= CLK_CO_PHASE_180;
+
+ /* 180 phase tx clock */
+ meson_mmc_clk |= CLK_TX_PHASE_000;
+
+ /* clock settings */
+ meson_mmc_clk |= clk_src;
+ meson_mmc_clk |= clk_div;
+
+ meson_write(mmc, meson_mmc_clk, MESON_SD_EMMC_CLOCK);
+}
+
+static int meson_dm_mmc_set_ios(struct udevice *dev)
+{
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+ uint32_t meson_mmc_cfg;
+
+ meson_mmc_config_clock(mmc);
+
+ meson_mmc_cfg = meson_read(mmc, MESON_SD_EMMC_CFG);
+
+ meson_mmc_cfg &= ~CFG_BUS_WIDTH_MASK;
+ if (mmc->bus_width == 1)
+ meson_mmc_cfg |= CFG_BUS_WIDTH_1;
+ else if (mmc->bus_width == 4)
+ meson_mmc_cfg |= CFG_BUS_WIDTH_4;
+ else if (mmc->bus_width == 8)
+ meson_mmc_cfg |= CFG_BUS_WIDTH_8;
+ else
+ return -EINVAL;
+
+ /* 512 bytes block length */
+ meson_mmc_cfg &= ~CFG_BL_LEN_MASK;
+ meson_mmc_cfg |= CFG_BL_LEN_512;
+
+ /* Response timeout 256 clk */
+ meson_mmc_cfg &= ~CFG_RESP_TIMEOUT_MASK;
+ meson_mmc_cfg |= CFG_RESP_TIMEOUT_256;
+
+ /* Command-command gap 16 clk */
+ meson_mmc_cfg &= ~CFG_RC_CC_MASK;
+ meson_mmc_cfg |= CFG_RC_CC_16;
+
+ meson_write(mmc, meson_mmc_cfg, MESON_SD_EMMC_CFG);
+
+ return 0;
+}
+
+static void meson_mmc_setup_cmd(struct mmc *mmc, struct mmc_data *data,
+ struct mmc_cmd *cmd)
+{
+ uint32_t meson_mmc_cmd = 0, cfg;
+
+ meson_mmc_cmd |= cmd->cmdidx << CMD_CFG_CMD_INDEX_SHIFT;
+
+ if (cmd->resp_type & MMC_RSP_PRESENT) {
+ if (cmd->resp_type & MMC_RSP_136)
+ meson_mmc_cmd |= CMD_CFG_RESP_128;
+
+ if (cmd->resp_type & MMC_RSP_BUSY)
+ meson_mmc_cmd |= CMD_CFG_R1B;
+
+ if (!(cmd->resp_type & MMC_RSP_CRC))
+ meson_mmc_cmd |= CMD_CFG_RESP_NOCRC;
+ } else {
+ meson_mmc_cmd |= CMD_CFG_NO_RESP;
+ }
+
+ if (data) {
+ cfg = meson_read(mmc, MESON_SD_EMMC_CFG);
+ cfg &= ~CFG_BL_LEN_MASK;
+ cfg |= ilog2(data->blocksize) << CFG_BL_LEN_SHIFT;
+ meson_write(mmc, cfg, MESON_SD_EMMC_CFG);
+
+ if (data->flags == MMC_DATA_WRITE)
+ meson_mmc_cmd |= CMD_CFG_DATA_WR;
+
+ meson_mmc_cmd |= CMD_CFG_DATA_IO | CMD_CFG_BLOCK_MODE |
+ data->blocks;
+ }
+
+ meson_mmc_cmd |= CMD_CFG_TIMEOUT_4S | CMD_CFG_OWNER |
+ CMD_CFG_END_OF_CHAIN;
+
+ meson_write(mmc, meson_mmc_cmd, MESON_SD_EMMC_CMD_CFG);
+}
+
+static void meson_mmc_setup_addr(struct mmc *mmc, struct mmc_data *data)
+{
+ struct meson_mmc_platdata *pdata = mmc->priv;
+ unsigned int data_size;
+ uint32_t data_addr = 0;
+
+ if (data) {
+ data_size = data->blocks * data->blocksize;
+
+ if (data->flags == MMC_DATA_READ) {
+ data_addr = (ulong) data->dest;
+ invalidate_dcache_range(data_addr,
+ data_addr + data_size);
+ } else {
+ pdata->w_buf = calloc(data_size, sizeof(char));
+ data_addr = (ulong) pdata->w_buf;
+ memcpy(pdata->w_buf, data->src, data_size);
+ flush_dcache_range(data_addr, data_addr + data_size);
+ }
+ }
+
+ meson_write(mmc, data_addr, MESON_SD_EMMC_CMD_DAT);
+}
+
+static void meson_mmc_read_response(struct mmc *mmc, struct mmc_cmd *cmd)
+{
+ if (cmd->resp_type & MMC_RSP_136) {
+ cmd->response[0] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP3);
+ cmd->response[1] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP2);
+ cmd->response[2] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP1);
+ cmd->response[3] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP);
+ } else {
+ cmd->response[0] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP);
+ }
+}
+
+static int meson_dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+ struct meson_mmc_platdata *pdata = mmc->priv;
+ uint32_t status;
+ ulong start;
+ int ret = 0;
+
+ /* max block size supported by chip is 512 byte */
+ if (data && data->blocksize > 512)
+ return -EINVAL;
+
+ meson_mmc_setup_cmd(mmc, data, cmd);
+ meson_mmc_setup_addr(mmc, data);
+
+ meson_write(mmc, cmd->cmdarg, MESON_SD_EMMC_CMD_ARG);
+
+ /* use 10s timeout */
+ start = get_timer(0);
+ do {
+ status = meson_read(mmc, MESON_SD_EMMC_STATUS);
+ } while(!(status & STATUS_END_OF_CHAIN) && get_timer(start) < 10000);
+
+ if (!(status & STATUS_END_OF_CHAIN))
+ ret = -ETIMEDOUT;
+ else if (status & STATUS_RESP_TIMEOUT)
+ ret = -ETIMEDOUT;
+ else if (status & STATUS_ERR_MASK)
+ ret = -EIO;
+
+ meson_mmc_read_response(mmc, cmd);
+
+ if (data && data->flags == MMC_DATA_WRITE)
+ free(pdata->w_buf);
+
+ /* reset status bits */
+ meson_write(mmc, STATUS_MASK, MESON_SD_EMMC_STATUS);
+
+ return ret;
+}
+
+static const struct dm_mmc_ops meson_dm_mmc_ops = {
+ .send_cmd = meson_dm_mmc_send_cmd,
+ .set_ios = meson_dm_mmc_set_ios,
+};
+
+static int meson_mmc_ofdata_to_platdata(struct udevice *dev)
+{
+ struct meson_mmc_platdata *pdata = dev_get_platdata(dev);
+ fdt_addr_t addr;
+
+ addr = dev_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ pdata->regbase = (void *)addr;
+
+ return 0;
+}
+
+static int meson_mmc_probe(struct udevice *dev)
+{
+ struct meson_mmc_platdata *pdata = dev_get_platdata(dev);
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct mmc *mmc = &pdata->mmc;
+ struct mmc_config *cfg = &pdata->cfg;
+ uint32_t val;
+
+ cfg->voltages = MMC_VDD_33_34 | MMC_VDD_32_33 |
+ MMC_VDD_31_32 | MMC_VDD_165_195;
+ cfg->host_caps = MMC_MODE_8BIT | MMC_MODE_4BIT |
+ MMC_MODE_HS_52MHz | MMC_MODE_HS;
+ cfg->f_min = DIV_ROUND_UP(SD_EMMC_CLKSRC_24M, CLK_MAX_DIV);
+ cfg->f_max = 100000000; /* 100 MHz */
+ cfg->b_max = 256; /* max 256 blocks */
+ cfg->name = dev->name;
+
+ mmc->priv = pdata;
+ upriv->mmc = mmc;
+
+ mmc_set_clock(mmc, cfg->f_min);
+
+ /* reset all status bits */
+ meson_write(mmc, STATUS_MASK, MESON_SD_EMMC_STATUS);
+
+ /* disable interrupts */
+ meson_write(mmc, 0, MESON_SD_EMMC_IRQ_EN);
+
+ /* enable auto clock mode */
+ val = meson_read(mmc, MESON_SD_EMMC_CFG);
+ val &= ~CFG_SDCLK_ALWAYS_ON;
+ val |= CFG_AUTO_CLK;
+ meson_write(mmc, val, MESON_SD_EMMC_CFG);
+
+ return 0;
+}
+
+int meson_mmc_bind(struct udevice *dev)
+{
+ struct meson_mmc_platdata *pdata = dev_get_platdata(dev);
+
+ return mmc_bind(dev, &pdata->mmc, &pdata->cfg);
+}
+
+static const struct udevice_id meson_mmc_match[] = {
+ { .compatible = "amlogic,meson-gx-mmc" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(meson_mmc) = {
+ .name = "meson_gx_mmc",
+ .id = UCLASS_MMC,
+ .of_match = meson_mmc_match,
+ .ops = &meson_dm_mmc_ops,
+ .probe = meson_mmc_probe,
+ .bind = meson_mmc_bind,
+ .ofdata_to_platdata = meson_mmc_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct meson_mmc_platdata),
+};
unsigned int start_addr)
{
unsigned int stat, rdy, mask, timeout, block = 0;
+ bool transfer_done = false;
#ifdef CONFIG_MMC_SDHCI_SDMA
unsigned char ctrl;
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
__func__, stat);
return -EIO;
}
- if (stat & rdy) {
+ if (!transfer_done && (stat & rdy)) {
if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & mask))
continue;
sdhci_writel(host, rdy, SDHCI_INT_STATUS);
sdhci_transfer_pio(host, data);
data->dest += data->blocksize;
- if (++block >= data->blocks)
- break;
+ if (++block >= data->blocks) {
+ /* Keep looping until the SDHCI_INT_DATA_END is
+ * cleared, even if we finished sending all the
+ * blocks.
+ */
+ transfer_done = true;
+ continue;
+ }
}
#ifdef CONFIG_MMC_SDHCI_SDMA
- if (stat & SDHCI_INT_DMA_END) {
+ if (!transfer_done && (stat & SDHCI_INT_DMA_END)) {
sdhci_writel(host, SDHCI_INT_DMA_END, SDHCI_INT_STATUS);
start_addr &= ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1);
start_addr += SDHCI_DEFAULT_BOUNDARY_SIZE;
IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE;
#ifdef CONFIG_SYS_NAND_ENABLE_PIN
- gpio_set_value(CONFIG_SYS_NAND_ENABLE_PIN, !(ctrl & NAND_NCE));
+ at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN,
+ !(ctrl & NAND_NCE));
#endif
this->IO_ADDR_W = (void *) IO_ADDR_W;
}
#ifdef CONFIG_SYS_NAND_READY_PIN
static int at91_nand_ready(struct mtd_info *mtd)
{
- return gpio_get_value(CONFIG_SYS_NAND_READY_PIN);
+ return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN);
}
#endif
ATMEL_PMX_AA_ETXEN | ATMEL_PMX_AA_EREFCK;
writel(value, &pio->pioa.pdr);
- writel(value, &pio->pioa.asr);
+ writel(value, &pio->pioa.mux.pio2.asr);
#ifdef CONFIG_RMII
value = ATMEL_PMX_BA_ERXCK;
ATMEL_PMX_BA_ETX3 | ATMEL_PMX_BA_ETX2;
#endif
writel(value, &pio->piob.pdr);
- writel(value, &pio->piob.bsr);
+ writel(value, &pio->piob.mux.pio2.bsr);
at91_periph_clk_enable(ATMEL_ID_EMAC);
config MV88E61XX_SWITCH
bool "Marvel MV88E61xx Ethernet switch PHY support."
+if MV88E61XX_SWITCH
+
+config MV88E61XX_CPU_PORT
+ int "CPU Port"
+
+config MV88E61XX_PHY_PORTS
+ hex "Bitmask of PHY Ports"
+
+config MV88E61XX_FIXED_PORTS
+ hex "Bitmask of PHYless serdes Ports"
+
+endif # MV88E61XX_SWITCH
+
config PHYLIB_10G
bool "Generic 10G PHY support"
definitions and pin control functions for each available multiplex
function.
+config PINCTRL_AT91
+ bool "AT91 pinctrl driver"
+ depends on DM
+ help
+ This option is to enable the AT91 pinctrl driver for AT91 PIO
+ controller. AT91 PIO controller is a combined gpio-controller,
+ pin-mux and pin-config module. Each I/O pin may be dedicated as
+ a general-purpose I/O or be assigned to a function of an embedded
+ peripheral. Each I/O pin has a glitch filter providing rejection of
+ glitches lower than one-half of peripheral clock cycle and
+ a debouncing filter providing rejection of unwanted pulses from key
+ or push button operations. You can also control the multi-driver
+ capability, pull-up and pull-down feature on each I/O pin.
+
config PINCTRL_AT91PIO4
bool "AT91 PIO4 pinctrl driver"
depends on DM
obj-y += pinctrl-uclass.o
obj-$(CONFIG_$(SPL_)PINCTRL_GENERIC) += pinctrl-generic.o
+obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o
obj-y += nxp/
obj-$(CONFIG_ARCH_ATH79) += ath79/
--- /dev/null
+/*
+ * Atmel PIO pinctrl driver
+ *
+ * Copyright (C) 2016 Atmel Corporation
+ * Wenyou.Yang <wenyou.yang@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm/device.h>
+#include <dm/pinctrl.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach/at91_pio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MAX_GPIO_BANKS 5
+#define MAX_NB_GPIO_PER_BANK 32
+
+#define MAX_PINMUX_ENTRIES 200
+
+struct at91_pinctrl_priv {
+ struct at91_port *reg_base[MAX_GPIO_BANKS];
+ u32 nbanks;
+};
+
+#define PULL_UP BIT(0)
+#define MULTI_DRIVE BIT(1)
+#define DEGLITCH BIT(2)
+#define PULL_DOWN BIT(3)
+#define DIS_SCHMIT BIT(4)
+#define DRIVE_STRENGTH_SHIFT 5
+#define DRIVE_STRENGTH_MASK 0x3
+#define DRIVE_STRENGTH (DRIVE_STRENGTH_MASK << DRIVE_STRENGTH_SHIFT)
+#define OUTPUT BIT(7)
+#define OUTPUT_VAL_SHIFT 8
+#define OUTPUT_VAL (0x1 << OUTPUT_VAL_SHIFT)
+#define DEBOUNCE BIT(16)
+#define DEBOUNCE_VAL_SHIFT 17
+#define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT)
+
+/**
+ * These defines will translated the dt binding settings to our internal
+ * settings. They are not necessarily the same value as the register setting.
+ * The actual drive strength current of low, medium and high must be looked up
+ * from the corresponding device datasheet. This value is different for pins
+ * that are even in the same banks. It is also dependent on VCC.
+ * DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive
+ * strength when there is no dt config for it.
+ */
+#define DRIVE_STRENGTH_DEFAULT (0 << DRIVE_STRENGTH_SHIFT)
+#define DRIVE_STRENGTH_LOW (1 << DRIVE_STRENGTH_SHIFT)
+#define DRIVE_STRENGTH_MED (2 << DRIVE_STRENGTH_SHIFT)
+#define DRIVE_STRENGTH_HI (3 << DRIVE_STRENGTH_SHIFT)
+
+enum at91_mux {
+ AT91_MUX_GPIO = 0,
+ AT91_MUX_PERIPH_A = 1,
+ AT91_MUX_PERIPH_B = 2,
+ AT91_MUX_PERIPH_C = 3,
+ AT91_MUX_PERIPH_D = 4,
+};
+
+/**
+ * struct at91_pinctrl_mux_ops - describes an AT91 mux ops group
+ * on new IP with support for periph C and D the way to mux in
+ * periph A and B has changed
+ * So provide the right callbacks
+ * if not present means the IP does not support it
+ * @mux_A_periph: assign the corresponding pin to the peripheral A function.
+ * @mux_B_periph: assign the corresponding pin to the peripheral B function.
+ * @mux_C_periph: assign the corresponding pin to the peripheral C function.
+ * @mux_D_periph: assign the corresponding pin to the peripheral D function.
+ * @set_deglitch: enable/disable the deglitch feature.
+ * @set_debounce: enable/disable the debounce feature.
+ * @set_pulldown: enable/disable the pulldown feature.
+ * @disable_schmitt_trig: disable schmitt trigger
+ */
+struct at91_pinctrl_mux_ops {
+ void (*mux_A_periph)(struct at91_port *pio, u32 mask);
+ void (*mux_B_periph)(struct at91_port *pio, u32 mask);
+ void (*mux_C_periph)(struct at91_port *pio, u32 mask);
+ void (*mux_D_periph)(struct at91_port *pio, u32 mask);
+ void (*set_deglitch)(struct at91_port *pio, u32 mask, bool is_on);
+ void (*set_debounce)(struct at91_port *pio, u32 mask, bool is_on,
+ u32 div);
+ void (*set_pulldown)(struct at91_port *pio, u32 mask, bool is_on);
+ void (*disable_schmitt_trig)(struct at91_port *pio, u32 mask);
+ void (*set_drivestrength)(struct at91_port *pio, u32 pin,
+ u32 strength);
+};
+
+static u32 two_bit_pin_value_shift_amount(u32 pin)
+{
+ /* return the shift value for a pin for "two bit" per pin registers,
+ * i.e. drive strength */
+ return 2 * ((pin >= MAX_NB_GPIO_PER_BANK/2)
+ ? pin - MAX_NB_GPIO_PER_BANK/2 : pin);
+}
+
+static void at91_mux_disable_interrupt(struct at91_port *pio, u32 mask)
+{
+ writel(mask, &pio->idr);
+}
+
+static void at91_mux_set_pullup(struct at91_port *pio, u32 mask, bool on)
+{
+ if (on)
+ writel(mask, &pio->mux.pio3.ppddr);
+
+ writel(mask, (on ? &pio->puer : &pio->pudr));
+}
+
+static void at91_mux_set_output(struct at91_port *pio, unsigned mask,
+ bool is_on, bool val)
+{
+ writel(mask, (val ? &pio->sodr : &pio->codr));
+ writel(mask, (is_on ? &pio->oer : &pio->odr));
+}
+
+static void at91_mux_set_multidrive(struct at91_port *pio, u32 mask, bool on)
+{
+ writel(mask, (on ? &pio->mder : &pio->mddr));
+}
+
+static void at91_mux_set_A_periph(struct at91_port *pio, u32 mask)
+{
+ writel(mask, &pio->mux.pio2.asr);
+}
+
+static void at91_mux_set_B_periph(struct at91_port *pio, u32 mask)
+{
+ writel(mask, &pio->mux.pio2.bsr);
+}
+
+static void at91_mux_pio3_set_A_periph(struct at91_port *pio, u32 mask)
+{
+ writel(readl(&pio->mux.pio3.abcdsr1) & ~mask, &pio->mux.pio3.abcdsr1);
+ writel(readl(&pio->mux.pio3.abcdsr2) & ~mask, &pio->mux.pio3.abcdsr2);
+}
+
+static void at91_mux_pio3_set_B_periph(struct at91_port *pio, u32 mask)
+{
+ writel(readl(&pio->mux.pio3.abcdsr1) | mask, &pio->mux.pio3.abcdsr1);
+ writel(readl(&pio->mux.pio3.abcdsr2) & ~mask, &pio->mux.pio3.abcdsr2);
+}
+
+static void at91_mux_pio3_set_C_periph(struct at91_port *pio, u32 mask)
+{
+ writel(readl(&pio->mux.pio3.abcdsr1) & ~mask, &pio->mux.pio3.abcdsr1);
+ writel(readl(&pio->mux.pio3.abcdsr2) | mask, &pio->mux.pio3.abcdsr2);
+}
+
+static void at91_mux_pio3_set_D_periph(struct at91_port *pio, u32 mask)
+{
+ writel(readl(&pio->mux.pio3.abcdsr1) | mask, &pio->mux.pio3.abcdsr1);
+ writel(readl(&pio->mux.pio3.abcdsr2) | mask, &pio->mux.pio3.abcdsr2);
+}
+
+static void at91_mux_set_deglitch(struct at91_port *pio, u32 mask, bool is_on)
+{
+ writel(mask, (is_on ? &pio->ifer : &pio->ifdr));
+}
+
+static void at91_mux_pio3_set_deglitch(struct at91_port *pio,
+ u32 mask, bool is_on)
+{
+ if (is_on)
+ writel(mask, &pio->mux.pio3.ifscdr);
+ at91_mux_set_deglitch(pio, mask, is_on);
+}
+
+static void at91_mux_pio3_set_debounce(struct at91_port *pio, u32 mask,
+ bool is_on, u32 div)
+{
+ if (is_on) {
+ writel(mask, &pio->mux.pio3.ifscer);
+ writel(div & PIO_SCDR_DIV, &pio->mux.pio3.scdr);
+ writel(mask, &pio->ifer);
+ } else {
+ writel(mask, &pio->mux.pio3.ifscdr);
+ }
+}
+
+static void at91_mux_pio3_set_pulldown(struct at91_port *pio,
+ u32 mask, bool is_on)
+{
+ if (is_on)
+ writel(mask, &pio->pudr);
+
+ writel(mask, (is_on ? &pio->mux.pio3.ppder : &pio->mux.pio3.ppddr));
+}
+
+static void at91_mux_pio3_disable_schmitt_trig(struct at91_port *pio,
+ u32 mask)
+{
+ writel(readl(&pio->schmitt) | mask, &pio->schmitt);
+}
+
+static void set_drive_strength(void *reg, u32 pin, u32 strength)
+{
+ u32 shift = two_bit_pin_value_shift_amount(pin);
+
+ clrsetbits_le32(reg, DRIVE_STRENGTH_MASK << shift, strength << shift);
+}
+
+static void at91_mux_sama5d3_set_drivestrength(struct at91_port *pio,
+ u32 pin, u32 setting)
+{
+ void *reg;
+
+ reg = &pio->driver12;
+ if (pin >= MAX_NB_GPIO_PER_BANK / 2)
+ reg = &pio->driver2;
+
+ /* do nothing if setting is zero */
+ if (!setting)
+ return;
+
+ /* strength is 1 to 1 with setting for SAMA5 */
+ set_drive_strength(reg, pin, setting);
+}
+
+static void at91_mux_sam9x5_set_drivestrength(struct at91_port *pio,
+ u32 pin, u32 setting)
+{
+ void *reg;
+
+ reg = &pio->driver1;
+ if (pin >= MAX_NB_GPIO_PER_BANK / 2)
+ reg = &pio->driver12;
+
+ /* do nothing if setting is zero */
+ if (!setting)
+ return;
+
+ /* strength is inverse on SAM9x5s with our defines
+ * 0 = hi, 1 = med, 2 = low, 3 = rsvd */
+ setting = DRIVE_STRENGTH_HI - setting;
+
+ set_drive_strength(reg, pin, setting);
+}
+
+static struct at91_pinctrl_mux_ops at91rm9200_ops = {
+ .mux_A_periph = at91_mux_set_A_periph,
+ .mux_B_periph = at91_mux_set_B_periph,
+ .set_deglitch = at91_mux_set_deglitch,
+};
+
+static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
+ .mux_A_periph = at91_mux_pio3_set_A_periph,
+ .mux_B_periph = at91_mux_pio3_set_B_periph,
+ .mux_C_periph = at91_mux_pio3_set_C_periph,
+ .mux_D_periph = at91_mux_pio3_set_D_periph,
+ .set_deglitch = at91_mux_pio3_set_deglitch,
+ .set_debounce = at91_mux_pio3_set_debounce,
+ .set_pulldown = at91_mux_pio3_set_pulldown,
+ .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
+ .set_drivestrength = at91_mux_sam9x5_set_drivestrength,
+};
+
+static struct at91_pinctrl_mux_ops sama5d3_ops = {
+ .mux_A_periph = at91_mux_pio3_set_A_periph,
+ .mux_B_periph = at91_mux_pio3_set_B_periph,
+ .mux_C_periph = at91_mux_pio3_set_C_periph,
+ .mux_D_periph = at91_mux_pio3_set_D_periph,
+ .set_deglitch = at91_mux_pio3_set_deglitch,
+ .set_debounce = at91_mux_pio3_set_debounce,
+ .set_pulldown = at91_mux_pio3_set_pulldown,
+ .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
+ .set_drivestrength = at91_mux_sama5d3_set_drivestrength,
+};
+
+static void at91_mux_gpio_disable(struct at91_port *pio, u32 mask)
+{
+ writel(mask, &pio->pdr);
+}
+
+static void at91_mux_gpio_enable(struct at91_port *pio, u32 mask, bool input)
+{
+ writel(mask, &pio->per);
+ writel(mask, (input ? &pio->odr : &pio->oer));
+}
+
+static int at91_pmx_set(struct at91_pinctrl_mux_ops *ops,
+ struct at91_port *pio, u32 mask, enum at91_mux mux)
+{
+ at91_mux_disable_interrupt(pio, mask);
+ switch (mux) {
+ case AT91_MUX_GPIO:
+ at91_mux_gpio_enable(pio, mask, 1);
+ break;
+ case AT91_MUX_PERIPH_A:
+ ops->mux_A_periph(pio, mask);
+ break;
+ case AT91_MUX_PERIPH_B:
+ ops->mux_B_periph(pio, mask);
+ break;
+ case AT91_MUX_PERIPH_C:
+ if (!ops->mux_C_periph)
+ return -EINVAL;
+ ops->mux_C_periph(pio, mask);
+ break;
+ case AT91_MUX_PERIPH_D:
+ if (!ops->mux_D_periph)
+ return -EINVAL;
+ ops->mux_D_periph(pio, mask);
+ break;
+ }
+ if (mux)
+ at91_mux_gpio_disable(pio, mask);
+
+ return 0;
+}
+
+static int at91_pinconf_set(struct at91_pinctrl_mux_ops *ops,
+ struct at91_port *pio, u32 pin, u32 config)
+{
+ u32 mask = BIT(pin);
+
+ if ((config & PULL_UP) && (config & PULL_DOWN))
+ return -EINVAL;
+
+ at91_mux_set_output(pio, mask, config & OUTPUT,
+ (config & OUTPUT_VAL) >> OUTPUT_VAL_SHIFT);
+ at91_mux_set_pullup(pio, mask, config & PULL_UP);
+ at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);
+ if (ops->set_deglitch)
+ ops->set_deglitch(pio, mask, config & DEGLITCH);
+ if (ops->set_debounce)
+ ops->set_debounce(pio, mask, config & DEBOUNCE,
+ (config & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT);
+ if (ops->set_pulldown)
+ ops->set_pulldown(pio, mask, config & PULL_DOWN);
+ if (ops->disable_schmitt_trig && config & DIS_SCHMIT)
+ ops->disable_schmitt_trig(pio, mask);
+ if (ops->set_drivestrength)
+ ops->set_drivestrength(pio, pin,
+ (config & DRIVE_STRENGTH) >> DRIVE_STRENGTH_SHIFT);
+
+ return 0;
+}
+
+static int at91_pin_check_config(struct udevice *dev, u32 bank, u32 pin)
+{
+ struct at91_pinctrl_priv *priv = dev_get_priv(dev);
+
+ if (bank >= priv->nbanks) {
+ debug("pin conf bank %d >= nbanks %d\n", bank, priv->nbanks);
+ return -EINVAL;
+ }
+
+ if (pin >= MAX_NB_GPIO_PER_BANK) {
+ debug("pin conf pin %d >= %d\n", pin, MAX_NB_GPIO_PER_BANK);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int at91_pinctrl_set_state(struct udevice *dev, struct udevice *config)
+{
+ struct at91_pinctrl_priv *priv = dev_get_priv(dev);
+ const void *blob = gd->fdt_blob;
+ int node = config->of_offset;
+ u32 cells[MAX_PINMUX_ENTRIES];
+ const u32 *list = cells;
+ u32 bank, pin;
+ u32 conf, mask, count, i;
+ int size;
+ int ret;
+ enum at91_mux mux;
+ struct at91_port *pio;
+ struct at91_pinctrl_mux_ops *ops =
+ (struct at91_pinctrl_mux_ops *)dev_get_driver_data(dev);
+
+ /*
+ * the binding format is atmel,pins = <bank pin mux CONFIG ...>,
+ * do sanity check and calculate pins number
+ */
+ size = fdtdec_get_int_array_count(blob, node, "atmel,pins",
+ cells, ARRAY_SIZE(cells));
+
+ /* we do not check return since it's safe node passed down */
+ count = size >> 2;
+ if (!count)
+ return -EINVAL;
+
+ for (i = 0; i < count; i++) {
+ bank = *list++;
+ pin = *list++;
+ mux = *list++;
+ conf = *list++;
+
+ ret = at91_pin_check_config(dev, bank, pin);
+ if (ret)
+ return ret;
+
+ pio = priv->reg_base[bank];
+ mask = BIT(pin);
+
+ ret = at91_pmx_set(ops, pio, mask, mux);
+ if (ret)
+ return ret;
+
+ ret = at91_pinconf_set(ops, pio, pin, conf);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+const struct pinctrl_ops at91_pinctrl_ops = {
+ .set_state = at91_pinctrl_set_state,
+};
+
+static int at91_pinctrl_probe(struct udevice *dev)
+{
+ struct at91_pinctrl_priv *priv = dev_get_priv(dev);
+ fdt_addr_t addr_base;
+ int index;
+
+ for (index = 0; index < MAX_GPIO_BANKS; index++) {
+ addr_base = dev_get_addr_index(dev, index);
+ if (addr_base == FDT_ADDR_T_NONE)
+ break;
+
+ priv->reg_base[index] = (struct at91_port *)addr_base;
+ }
+
+ priv->nbanks = index;
+
+ return 0;
+}
+
+static const struct udevice_id at91_pinctrl_match[] = {
+ { .compatible = "atmel,sama5d3-pinctrl", .data = (ulong)&sama5d3_ops },
+ { .compatible = "atmel,at91sam9x5-pinctrl", .data = (ulong)&at91sam9x5_ops },
+ { .compatible = "atmel,at91rm9200-pinctrl", .data = (ulong)&at91rm9200_ops },
+ {}
+};
+
+U_BOOT_DRIVER(at91_pinctrl) = {
+ .name = "pinctrl_at91",
+ .id = UCLASS_PINCTRL,
+ .of_match = at91_pinctrl_match,
+ .probe = at91_pinctrl_probe,
+ .priv_auto_alloc_size = sizeof(struct at91_pinctrl_priv),
+ .ops = &at91_pinctrl_ops,
+};
.setbrg = ns16550_serial_setbrg,
};
-#if !CONFIG_IS_ENABLED(OF_PLATDATA)
-#if CONFIG_IS_ENABLED(OF_CONTROL)
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
/*
* Please consider existing compatible strings before adding a new
* one to keep this table compact. Or you may add a generic "ns16550"
{ .compatible = "ti,dra742-uart", .data = PORT_NS16550 },
{}
};
-#endif
+#endif /* OF_CONTROL && !OF_PLATDATA */
#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
+
+/* TODO(sjg@chromium.org): Integrate this into a macro like CONFIG_IS_ENABLED */
+#if !defined(CONFIG_TPL_BUILD) || defined(CONFIG_TPL_DM_SERIAL)
U_BOOT_DRIVER(ns16550_serial) = {
.name = "ns16550_serial",
.id = UCLASS_SERIAL,
-#if CONFIG_IS_ENABLED(OF_CONTROL)
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
.of_match = ns16550_serial_ids,
.ofdata_to_platdata = ns16550_serial_ofdata_to_platdata,
.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
.flags = DM_FLAG_PRE_RELOC,
};
#endif
-#endif /* !OF_PLATDATA */
+#endif /* SERIAL_PRESENT */
+
#endif /* CONFIG_DM_SERIAL */
divisor = UART_PL010_BAUD_9600;
break;
case 19200:
- divisor = UART_PL010_BAUD_9600;
+ divisor = UART_PL010_BAUD_19200;
break;
case 38400:
divisor = UART_PL010_BAUD_38400;
}
/*
- * DENX M28EVK:
+ * ARIES M28EVK:
* setenv videomode
* video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066,
* le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,vmode:0
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2010 - 2011 NVIDIA Corporation <www.nvidia.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _AES_REF_H_
-#define _AES_REF_H_
-
-#ifdef USE_HOSTCC
-/* Define compat stuff for use in fw_* tools. */
-typedef unsigned char u8;
-typedef unsigned int u32;
-#define debug(...) do {} while (0)
-#endif
-
-/*
- * AES encryption library, with small code size, supporting only 128-bit AES
- *
- * AES is a stream cipher which works a block at a time, with each block
- * in this case being AES_KEY_LENGTH bytes.
- */
-
-enum {
- AES_STATECOLS = 4, /* columns in the state & expanded key */
- AES_KEYCOLS = 4, /* columns in a key */
- AES_ROUNDS = 10, /* rounds in encryption */
-
- AES_KEY_LENGTH = 128 / 8,
- AES_EXPAND_KEY_LENGTH = 4 * AES_STATECOLS * (AES_ROUNDS + 1),
-};
-
-/**
- * aes_expand_key() - Expand the AES key
- *
- * Expand a key into a key schedule, which is then used for the other
- * operations.
- *
- * @key Key, of length AES_KEY_LENGTH bytes
- * @expkey Buffer to place expanded key, AES_EXPAND_KEY_LENGTH
- */
-void aes_expand_key(u8 *key, u8 *expkey);
-
-/**
- * aes_encrypt() - Encrypt single block of data with AES 128
- *
- * @in Input data
- * @expkey Expanded key to use for encryption (from aes_expand_key())
- * @out Output data
- */
-void aes_encrypt(u8 *in, u8 *expkey, u8 *out);
-
-/**
- * aes_decrypt() - Decrypt single block of data with AES 128
- *
- * @in Input data
- * @expkey Expanded key to use for decryption (from aes_expand_key())
- * @out Output data
- */
-void aes_decrypt(u8 *in, u8 *expkey, u8 *out);
-
-/**
- * Apply chain data to the destination using EOR
- *
- * Each array is of length AES_KEY_LENGTH.
- *
- * @cbc_chain_data Chain data
- * @src Source data
- * @dst Destination data, which is modified here
- */
-void aes_apply_cbc_chain_data(u8 *cbc_chain_data, u8 *src, u8 *dst);
-
-/**
- * aes_cbc_encrypt_blocks() - Encrypt multiple blocks of data with AES CBC.
- *
- * @key_exp Expanded key to use
- * @src Source data to encrypt
- * @dst Destination buffer
- * @num_aes_blocks Number of AES blocks to encrypt
- */
-void aes_cbc_encrypt_blocks(u8 *key_exp, u8 *src, u8 *dst, u32 num_aes_blocks);
-
-/**
- * Decrypt multiple blocks of data with AES CBC.
- *
- * @key_exp Expanded key to use
- * @src Source data to decrypt
- * @dst Destination buffer
- * @num_aes_blocks Number of AES blocks to decrypt
- */
-void aes_cbc_decrypt_blocks(u8 *key_exp, u8 *src, u8 *dst, u32 num_aes_blocks);
-
-#endif /* _AES_REF_H_ */
int timer_init(void);
int cpu_init(void);
-/* */
-int initdram(void);
-
#include <display_options.h>
/* common/main.c */
#define CONFIG_SYS_FSL_USDHC_NUM 3
/* Framebuffer */
+#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
+#endif
#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#define CONFIG_ENV_VARS_UBOOT_CONFIG
/* general purpose I/O */
+#ifndef CONFIG_DM_GPIO
#define CONFIG_AT91_GPIO
+#endif
/*
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_USDHC_NUM 1
+
+/* eMMC Configs */
+#define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_SUPPORT_EMMC_RPMB
/* Filesystem support */
#define CONFIG_CMD_UBIFS
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RGMII
#define CONFIG_FEC_MXC_PHYADDR 0
-#define CONFIG_PHYLIB
#define CONFIG_ARP_TIMEOUT 200UL
/* USB Configs */
#endif
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 0
+ #define CONFIG_SYS_MMC_ENV_PART 1
#define CONFIG_ENV_OFFSET (709 * SZ_1K)
#define CONFIG_ENV_SIZE (128 * SZ_1K)
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K))
--- /dev/null
+/*
+ * Copyright (C) 2017 Logic PD, Inc.
+ *
+ * Configuration settings for the LogicPD i.MX6 SOM.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __IMX6LOGIC_CONFIG_H
+#define __IMX6LOGIC_CONFIG_H
+
+#define CONFIG_MXC_UART_BASE UART1_BASE
+#define CONSOLE_DEV "ttymxc0"
+
+#include <config_distro_defaults.h>
+#include "mx6_common.h"
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
+
+#define CONFIG_MXC_UART
+
+/* MMC Configs */
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* Dev kit SD card */
+
+/* Ethernet Configs */
+#define CONFIG_MII
+#define CONFIG_FEC_XCV_TYPE RMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 0
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_SMSC
+
+/* Command definition */
+#define CONFIG_CMD_BMODE
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "image=zImage\0" \
+ "bootm_size=0x10000000\0" \
+ "fdt_addr_r=0x18000000\0" \
+ "fdt_addr=0x18000000\0" \
+ "ramdisk_addr_r=0x13000000\0" \
+ "ramdiskaddr=0x13000000\0" \
+ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+ "ramdisk_file=rootfs.cpio.uboot\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
+ "console=" CONSOLE_DEV "\0" \
+ "mmcdev=1\0" \
+ "mmcpart=1\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "nandroot=ubi0:rootfs rootfstype=ubifs\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate}" \
+ " root=${mmcroot} ${mtdparts}\0" \
+ "nandargs=setenv bootargs console=${console},${baudrate}" \
+ " ubi.mtd=fs root=${nandroot} ${mtdparts}\0" \
+ "ramargs=setenv bootargs console=${console},${baudrate}" \
+ " root=/dev/ram rw ${mtdparts}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...;" \
+ " source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};" \
+ " setenv kernelsize ${filesize}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdiskaddr}" \
+ " ${ramdisk_file}; setenv ramdisksize ${filesize}\0" \
+ "mmcboot=echo Booting from mmc...; run mmcargs; run loadimage;" \
+ " run loadfdt; bootz ${loadaddr} - ${fdt_addr}\0" \
+ "mmcramboot=run ramargs; run loadimage;" \
+ " run loadfdt; run loadramdisk;" \
+ " bootz ${loadaddr} ${ramdiskaddr} ${fdt_addr}\0" \
+ "nandboot=echo Booting from nand ...; " \
+ " run nandargs;" \
+ " nand read ${loadaddr} kernel ${kernelsize};" \
+ " nand read ${fdt_addr} dtb;" \
+ " bootz ${loadaddr} - ${fdt_addr}\0" \
+ "nandramboot=echo Booting RAMdisk from nand ...; " \
+ " nand read ${ramdiskaddr} fs ${ramdisksize};" \
+ " nand read ${loadaddr} kernel ${kernelsize};" \
+ " nand read ${fdt_addr} dtb;" \
+ " run ramargs;" \
+ " bootz ${loadaddr} ${ramdiskaddr} ${fdt_addr}\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs" \
+ " ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${image}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0" \
+ "autoboot=mmc dev ${mmcdev};" \
+ "if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else run netboot; fi"
+#define CONFIG_BOOTCOMMAND \
+ "run autoboot"
+
+#define CONFIG_ARP_TIMEOUT 200UL
+
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END 0x10010000
+#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* Environment organization */
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x400000
+#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+
+/* NAND stuff */
+#define CONFIG_CMD_NAND_TRIMFFS
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
+
+/* MTD device */
+# define CONFIG_MTD_DEVICE
+# define CONFIG_CMD_MTDPARTS
+# define CONFIG_MTD_PARTITIONS
+# define MTDIDS_DEFAULT "nand0=gpmi-nand"
+# define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:4m(uboot)," \
+ "1m(env),16m(kernel),1m(dtb),-(fs)"
+
+/* DMA stuff, needed for GPMI/MXS NAND support */
+#define CONFIG_APBH_DMA
+#define CONFIG_APBH_DMA_BURST
+#define CONFIG_APBH_DMA_BURST8
+
+/* EEPROM contains serial no, MAC addr and other Logic PD info */
+#define CONFIG_I2C_EEPROM
+
+#endif /* __IMX6LOGIC_CONFIG_H */
/*
- * DENX M53 configuration
+ * Aries M53 configuration
* Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
"run nor_update;" \
"fi\0" \
+ "tftp_nor_dtb="\
+ "echo 'Update mccmon6 NOR DTB via TFTP'; " \
+ "setenv nor_img_file imx6q-mccmon6.dtb; " \
+ "setenv nor_img_size 0x20000; " \
+ "setenv nor_bank_start 0x09980000; " \
+ "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
+ "run nor_update;" \
+ "fi\0" \
"tftp_nor_img="\
"echo 'Update mccmon6 NOR image via TFTP'; " \
"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
"initrd_high=0xffffffff\0" \
"fdt_high=0xffffffff\0" \
"ip_dyn=yes\0" \
- "console=" CONSOLE_DEV "\0" \
+ "console=" CONSOLE_DEV ",115200\0" \
"bootm_size=0x10000000\0" \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"update_sd_firmware=" \
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
/* I2C Configs */
-#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
/* Environment organization */
#define CONFIG_ENV_SIZE SZ_8K
-#if defined CONFIG_SYS_BOOT_SPINOR
+#if defined CONFIG_SPI_BOOT
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET (768 * 1024)
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#include "at91-sama5_common.h"
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE ATMEL_BASE_USART3
-#define CONFIG_USART_ID ATMEL_ID_USART3
-
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
#define CONFIG_SYS_SDRAM_SIZE 0x20000000
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR 0x210000
+#define CONFIG_SYS_INIT_SP_ADDR 0x218000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-/* SerialFlash */
-
#ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
-#define CONFIG_ATMEL_SPI0
-#define CONFIG_SF_DEFAULT_BUS 0
-#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 30000000
#endif
#define CONFIG_ATMEL_NAND_HW_PMECC
#endif
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1
-#endif
-
-/* USB */
-
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-#endif
-
-/* USB device */
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK"
-
-/* Ethernet Hardware */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_MACB_SEARCH_PHY
-
/* LCD */
#ifdef CONFIG_LCD
#define LCD_BPP LCD_COLOR16
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x200000
-#define CONFIG_SPL_MAX_SIZE 0x10000
+#define CONFIG_SPL_MAX_SIZE 0x18000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
#elif CONFIG_SYS_USE_SERIALFLASH
#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
#endif
#endif
#include "at91-sama5_common.h"
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE ATMEL_BASE_USART3
-#define CONFIG_USART_ID ATMEL_ID_USART3
-
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
#define CONFIG_SYS_SDRAM_SIZE 0x20000000
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR 0x210000
+#define CONFIG_SYS_INIT_SP_ADDR 0x218000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-/* SerialFlash */
-
#ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
-#define CONFIG_ATMEL_SPI0
-#define CONFIG_SF_DEFAULT_BUS 0
-#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 30000000
#endif
#define CONFIG_ATMEL_NAND_HW_PMECC
#endif
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1
-#endif
-
-/* USB */
-
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-#endif
-
-/* USB device */
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK"
-
-/* Ethernet Hardware */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_MACB_SEARCH_PHY
-
/* LCD */
#define LCD_BPP LCD_COLOR16
#define LCD_OUTPUT_BPP 18
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x200000
-#define CONFIG_SPL_MAX_SIZE 0x10000
+#define CONFIG_SPL_MAX_SIZE 0x18000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
#elif CONFIG_SYS_USE_SERIALFLASH
#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
#endif
#endif
#define CONFIG_SYS_TIMER_RATE 1000000
#endif
-/*
- * Number of bits in a C 'long' on this architecture. Set this to 32 when
- * building on a 32-bit machine.
- */
-#define CONFIG_SANDBOX_BITS_PER_LONG 64
-
#define CONFIG_LMB
#define CONFIG_ANDROID_BOOT_IMAGE
* Now define some functions - this should be inserted into the serial driver
*/
#define DEBUG_UART_FUNCS \
- void printch(int ch) \
+\
+ static inline void _printch(int ch) \
{ \
if (ch == '\n') \
_debug_uart_putc('\r'); \
_debug_uart_putc(ch); \
} \
+\
+ void printch(int ch) \
+ { \
+ _printch(ch); \
+ } \
\
void printascii(const char *str) \
{ \
while (*str) \
- printch(*str++); \
+ _printch(*str++); \
} \
\
static inline void printhex1(uint digit) \
* Copyright (C) 2003 Bernardo Innocenti <bernie@develer.com>
* Based on former asm-ppc/div64.h and asm-m68knommu/div64.h
*
+ * Optimization for constant divisors on 32-bit machines:
+ * Copyright (C) 2006-2015 Nicolas Pitre
+ *
* The semantics of do_div() are:
*
* uint32_t do_div(uint64_t *n, uint32_t base)
* {
- * uint32_t remainder = *n % base;
- * *n = *n / base;
- * return remainder;
+ * uint32_t remainder = *n % base;
+ * *n = *n / base;
+ * return remainder;
* }
*
* NOTE: macro parameter n is evaluated multiple times,
*/
#include <linux/types.h>
+#include <linux/compiler.h>
+
+#if BITS_PER_LONG == 64
+
+# define do_div(n,base) ({ \
+ uint32_t __base = (base); \
+ uint32_t __rem; \
+ __rem = ((uint64_t)(n)) % __base; \
+ (n) = ((uint64_t)(n)) / __base; \
+ __rem; \
+ })
+
+#elif BITS_PER_LONG == 32
+
+#include <linux/log2.h>
+
+/*
+ * If the divisor happens to be constant, we determine the appropriate
+ * inverse at compile time to turn the division into a few inline
+ * multiplications which ought to be much faster. And yet only if compiling
+ * with a sufficiently recent gcc version to perform proper 64-bit constant
+ * propagation.
+ *
+ * (It is unfortunate that gcc doesn't perform all this internally.)
+ */
+
+#ifndef __div64_const32_is_OK
+#define __div64_const32_is_OK (__GNUC__ >= 4)
+#endif
+
+#define __div64_const32(n, ___b) \
+({ \
+ /* \
+ * Multiplication by reciprocal of b: n / b = n * (p / b) / p \
+ * \
+ * We rely on the fact that most of this code gets optimized \
+ * away at compile time due to constant propagation and only \
+ * a few multiplication instructions should remain. \
+ * Hence this monstrous macro (static inline doesn't always \
+ * do the trick here). \
+ */ \
+ uint64_t ___res, ___x, ___t, ___m, ___n = (n); \
+ uint32_t ___p, ___bias; \
+ \
+ /* determine MSB of b */ \
+ ___p = 1 << ilog2(___b); \
+ \
+ /* compute m = ((p << 64) + b - 1) / b */ \
+ ___m = (~0ULL / ___b) * ___p; \
+ ___m += (((~0ULL % ___b + 1) * ___p) + ___b - 1) / ___b; \
+ \
+ /* one less than the dividend with highest result */ \
+ ___x = ~0ULL / ___b * ___b - 1; \
+ \
+ /* test our ___m with res = m * x / (p << 64) */ \
+ ___res = ((___m & 0xffffffff) * (___x & 0xffffffff)) >> 32; \
+ ___t = ___res += (___m & 0xffffffff) * (___x >> 32); \
+ ___res += (___x & 0xffffffff) * (___m >> 32); \
+ ___t = (___res < ___t) ? (1ULL << 32) : 0; \
+ ___res = (___res >> 32) + ___t; \
+ ___res += (___m >> 32) * (___x >> 32); \
+ ___res /= ___p; \
+ \
+ /* Now sanitize and optimize what we've got. */ \
+ if (~0ULL % (___b / (___b & -___b)) == 0) { \
+ /* special case, can be simplified to ... */ \
+ ___n /= (___b & -___b); \
+ ___m = ~0ULL / (___b / (___b & -___b)); \
+ ___p = 1; \
+ ___bias = 1; \
+ } else if (___res != ___x / ___b) { \
+ /* \
+ * We can't get away without a bias to compensate \
+ * for bit truncation errors. To avoid it we'd need an \
+ * additional bit to represent m which would overflow \
+ * a 64-bit variable. \
+ * \
+ * Instead we do m = p / b and n / b = (n * m + m) / p. \
+ */ \
+ ___bias = 1; \
+ /* Compute m = (p << 64) / b */ \
+ ___m = (~0ULL / ___b) * ___p; \
+ ___m += ((~0ULL % ___b + 1) * ___p) / ___b; \
+ } else { \
+ /* \
+ * Reduce m / p, and try to clear bit 31 of m when \
+ * possible, otherwise that'll need extra overflow \
+ * handling later. \
+ */ \
+ uint32_t ___bits = -(___m & -___m); \
+ ___bits |= ___m >> 32; \
+ ___bits = (~___bits) << 1; \
+ /* \
+ * If ___bits == 0 then setting bit 31 is unavoidable. \
+ * Simply apply the maximum possible reduction in that \
+ * case. Otherwise the MSB of ___bits indicates the \
+ * best reduction we should apply. \
+ */ \
+ if (!___bits) { \
+ ___p /= (___m & -___m); \
+ ___m /= (___m & -___m); \
+ } else { \
+ ___p >>= ilog2(___bits); \
+ ___m >>= ilog2(___bits); \
+ } \
+ /* No bias needed. */ \
+ ___bias = 0; \
+ } \
+ \
+ /* \
+ * Now we have a combination of 2 conditions: \
+ * \
+ * 1) whether or not we need to apply a bias, and \
+ * \
+ * 2) whether or not there might be an overflow in the cross \
+ * product determined by (___m & ((1 << 63) | (1 << 31))). \
+ * \
+ * Select the best way to do (m_bias + m * n) / (1 << 64). \
+ * From now on there will be actual runtime code generated. \
+ */ \
+ ___res = __arch_xprod_64(___m, ___n, ___bias); \
+ \
+ ___res /= ___p; \
+})
+
+#ifndef __arch_xprod_64
+/*
+ * Default C implementation for __arch_xprod_64()
+ *
+ * Prototype: uint64_t __arch_xprod_64(const uint64_t m, uint64_t n, bool bias)
+ * Semantic: retval = ((bias ? m : 0) + m * n) >> 64
+ *
+ * The product is a 128-bit value, scaled down to 64 bits.
+ * Assuming constant propagation to optimize away unused conditional code.
+ * Architectures may provide their own optimized assembly implementation.
+ */
+static inline uint64_t __arch_xprod_64(const uint64_t m, uint64_t n, bool bias)
+{
+ uint32_t m_lo = m;
+ uint32_t m_hi = m >> 32;
+ uint32_t n_lo = n;
+ uint32_t n_hi = n >> 32;
+ uint64_t res, tmp;
+
+ if (!bias) {
+ res = ((uint64_t)m_lo * n_lo) >> 32;
+ } else if (!(m & ((1ULL << 63) | (1ULL << 31)))) {
+ /* there can't be any overflow here */
+ res = (m + (uint64_t)m_lo * n_lo) >> 32;
+ } else {
+ res = m + (uint64_t)m_lo * n_lo;
+ tmp = (res < m) ? (1ULL << 32) : 0;
+ res = (res >> 32) + tmp;
+ }
+
+ if (!(m & ((1ULL << 63) | (1ULL << 31)))) {
+ /* there can't be any overflow here */
+ res += (uint64_t)m_lo * n_hi;
+ res += (uint64_t)m_hi * n_lo;
+ res >>= 32;
+ } else {
+ tmp = res += (uint64_t)m_lo * n_hi;
+ res += (uint64_t)m_hi * n_lo;
+ tmp = (res < tmp) ? (1ULL << 32) : 0;
+ res = (res >> 32) + tmp;
+ }
+ res += (uint64_t)m_hi * n_hi;
+
+ return res;
+}
+#endif
+
+#ifndef __div64_32
extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
+#endif
/* The unnecessary pointer compare is there
* to check for type safety (n must be 64bit)
uint32_t __base = (base); \
uint32_t __rem; \
(void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
- if (((n) >> 32) == 0) { \
+ if (__builtin_constant_p(__base) && \
+ is_power_of_2(__base)) { \
+ __rem = (n) & (__base - 1); \
+ (n) >>= ilog2(__base); \
+ } else if (__div64_const32_is_OK && \
+ __builtin_constant_p(__base) && \
+ __base != 0) { \
+ uint32_t __res_lo, __n_lo = (n); \
+ (n) = __div64_const32(n, __base); \
+ /* the remainder can be computed with 32-bit regs */ \
+ __res_lo = (n); \
+ __rem = __n_lo - __res_lo * __base; \
+ } else if (likely(((n) >> 32) == 0)) { \
__rem = (uint32_t)(n) % __base; \
(n) = (uint32_t)(n) / __base; \
- } else \
+ } else \
__rem = __div64_32(&(n), __base); \
__rem; \
})
+#else /* BITS_PER_LONG == ?? */
+
+# error do_div() does not yet support the C64
+
+#endif /* BITS_PER_LONG */
+
/* Wrapper for do_div(). Doesn't modify dividend and returns
* the result, not reminder.
*/
--- /dev/null
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_GXBB_AOCLK
+#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_GXBB_AOCLK
+
+#define CLKID_AO_REMOTE 0
+#define CLKID_AO_I2C_MASTER 1
+#define CLKID_AO_I2C_SLAVE 2
+#define CLKID_AO_UART1 3
+#define CLKID_AO_UART2 4
+#define CLKID_AO_IR_BLASTER 5
+
+#endif
--- /dev/null
+/*
+ * GXBB clock tree IDs
+ */
+
+#ifndef __GXBB_CLKC_H
+#define __GXBB_CLKC_H
+
+#define CLKID_CPUCLK 1
+#define CLKID_HDMI_PLL 2
+#define CLKID_FCLK_DIV2 4
+#define CLKID_FCLK_DIV3 5
+#define CLKID_FCLK_DIV4 6
+#define CLKID_CLK81 12
+#define CLKID_MPLL2 15
+#define CLKID_SPI 34
+#define CLKID_I2C 22
+#define CLKID_SAR_ADC 23
+#define CLKID_ETH 36
+#define CLKID_USB0 50
+#define CLKID_USB1 51
+#define CLKID_USB 55
+#define CLKID_HDMI_PCLK 63
+#define CLKID_USB1_DDR_BRIDGE 64
+#define CLKID_USB0_DDR_BRIDGE 65
+#define CLKID_SANA 69
+#define CLKID_GCLK_VENCI_INT0 77
+#define CLKID_AO_I2C 93
+#define CLKID_SD_EMMC_A 94
+#define CLKID_SD_EMMC_B 95
+#define CLKID_SD_EMMC_C 96
+#define CLKID_SAR_ADC_CLK 97
+#define CLKID_SAR_ADC_SEL 98
+
+#endif /* __GXBB_CLKC_H */
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX6SL_H
+#define __DT_BINDINGS_CLOCK_IMX6SL_H
+
+#define IMX6SL_CLK_DUMMY 0
+#define IMX6SL_CLK_CKIL 1
+#define IMX6SL_CLK_OSC 2
+#define IMX6SL_CLK_PLL1_SYS 3
+#define IMX6SL_CLK_PLL2_BUS 4
+#define IMX6SL_CLK_PLL3_USB_OTG 5
+#define IMX6SL_CLK_PLL4_AUDIO 6
+#define IMX6SL_CLK_PLL5_VIDEO 7
+#define IMX6SL_CLK_PLL6_ENET 8
+#define IMX6SL_CLK_PLL7_USB_HOST 9
+#define IMX6SL_CLK_USBPHY1 10
+#define IMX6SL_CLK_USBPHY2 11
+#define IMX6SL_CLK_USBPHY1_GATE 12
+#define IMX6SL_CLK_USBPHY2_GATE 13
+#define IMX6SL_CLK_PLL4_POST_DIV 14
+#define IMX6SL_CLK_PLL5_POST_DIV 15
+#define IMX6SL_CLK_PLL5_VIDEO_DIV 16
+#define IMX6SL_CLK_ENET_REF 17
+#define IMX6SL_CLK_PLL2_PFD0 18
+#define IMX6SL_CLK_PLL2_PFD1 19
+#define IMX6SL_CLK_PLL2_PFD2 20
+#define IMX6SL_CLK_PLL3_PFD0 21
+#define IMX6SL_CLK_PLL3_PFD1 22
+#define IMX6SL_CLK_PLL3_PFD2 23
+#define IMX6SL_CLK_PLL3_PFD3 24
+#define IMX6SL_CLK_PLL2_198M 25
+#define IMX6SL_CLK_PLL3_120M 26
+#define IMX6SL_CLK_PLL3_80M 27
+#define IMX6SL_CLK_PLL3_60M 28
+#define IMX6SL_CLK_STEP 29
+#define IMX6SL_CLK_PLL1_SW 30
+#define IMX6SL_CLK_OCRAM_ALT_SEL 31
+#define IMX6SL_CLK_OCRAM_SEL 32
+#define IMX6SL_CLK_PRE_PERIPH2_SEL 33
+#define IMX6SL_CLK_PRE_PERIPH_SEL 34
+#define IMX6SL_CLK_PERIPH2_CLK2_SEL 35
+#define IMX6SL_CLK_PERIPH_CLK2_SEL 36
+#define IMX6SL_CLK_CSI_SEL 37
+#define IMX6SL_CLK_LCDIF_AXI_SEL 38
+#define IMX6SL_CLK_USDHC1_SEL 39
+#define IMX6SL_CLK_USDHC2_SEL 40
+#define IMX6SL_CLK_USDHC3_SEL 41
+#define IMX6SL_CLK_USDHC4_SEL 42
+#define IMX6SL_CLK_SSI1_SEL 43
+#define IMX6SL_CLK_SSI2_SEL 44
+#define IMX6SL_CLK_SSI3_SEL 45
+#define IMX6SL_CLK_PERCLK_SEL 46
+#define IMX6SL_CLK_PXP_AXI_SEL 47
+#define IMX6SL_CLK_EPDC_AXI_SEL 48
+#define IMX6SL_CLK_GPU2D_OVG_SEL 49
+#define IMX6SL_CLK_GPU2D_SEL 50
+#define IMX6SL_CLK_LCDIF_PIX_SEL 51
+#define IMX6SL_CLK_EPDC_PIX_SEL 52
+#define IMX6SL_CLK_SPDIF0_SEL 53
+#define IMX6SL_CLK_SPDIF1_SEL 54
+#define IMX6SL_CLK_EXTERN_AUDIO_SEL 55
+#define IMX6SL_CLK_ECSPI_SEL 56
+#define IMX6SL_CLK_UART_SEL 57
+#define IMX6SL_CLK_PERIPH 58
+#define IMX6SL_CLK_PERIPH2 59
+#define IMX6SL_CLK_OCRAM_PODF 60
+#define IMX6SL_CLK_PERIPH_CLK2_PODF 61
+#define IMX6SL_CLK_PERIPH2_CLK2_PODF 62
+#define IMX6SL_CLK_IPG 63
+#define IMX6SL_CLK_CSI_PODF 64
+#define IMX6SL_CLK_LCDIF_AXI_PODF 65
+#define IMX6SL_CLK_USDHC1_PODF 66
+#define IMX6SL_CLK_USDHC2_PODF 67
+#define IMX6SL_CLK_USDHC3_PODF 68
+#define IMX6SL_CLK_USDHC4_PODF 69
+#define IMX6SL_CLK_SSI1_PRED 70
+#define IMX6SL_CLK_SSI1_PODF 71
+#define IMX6SL_CLK_SSI2_PRED 72
+#define IMX6SL_CLK_SSI2_PODF 73
+#define IMX6SL_CLK_SSI3_PRED 74
+#define IMX6SL_CLK_SSI3_PODF 75
+#define IMX6SL_CLK_PERCLK 76
+#define IMX6SL_CLK_PXP_AXI_PODF 77
+#define IMX6SL_CLK_EPDC_AXI_PODF 78
+#define IMX6SL_CLK_GPU2D_OVG_PODF 79
+#define IMX6SL_CLK_GPU2D_PODF 80
+#define IMX6SL_CLK_LCDIF_PIX_PRED 81
+#define IMX6SL_CLK_EPDC_PIX_PRED 82
+#define IMX6SL_CLK_LCDIF_PIX_PODF 83
+#define IMX6SL_CLK_EPDC_PIX_PODF 84
+#define IMX6SL_CLK_SPDIF0_PRED 85
+#define IMX6SL_CLK_SPDIF0_PODF 86
+#define IMX6SL_CLK_SPDIF1_PRED 87
+#define IMX6SL_CLK_SPDIF1_PODF 88
+#define IMX6SL_CLK_EXTERN_AUDIO_PRED 89
+#define IMX6SL_CLK_EXTERN_AUDIO_PODF 90
+#define IMX6SL_CLK_ECSPI_ROOT 91
+#define IMX6SL_CLK_UART_ROOT 92
+#define IMX6SL_CLK_AHB 93
+#define IMX6SL_CLK_MMDC_ROOT 94
+#define IMX6SL_CLK_ARM 95
+#define IMX6SL_CLK_ECSPI1 96
+#define IMX6SL_CLK_ECSPI2 97
+#define IMX6SL_CLK_ECSPI3 98
+#define IMX6SL_CLK_ECSPI4 99
+#define IMX6SL_CLK_EPIT1 100
+#define IMX6SL_CLK_EPIT2 101
+#define IMX6SL_CLK_EXTERN_AUDIO 102
+#define IMX6SL_CLK_GPT 103
+#define IMX6SL_CLK_GPT_SERIAL 104
+#define IMX6SL_CLK_GPU2D_OVG 105
+#define IMX6SL_CLK_I2C1 106
+#define IMX6SL_CLK_I2C2 107
+#define IMX6SL_CLK_I2C3 108
+#define IMX6SL_CLK_OCOTP 109
+#define IMX6SL_CLK_CSI 110
+#define IMX6SL_CLK_PXP_AXI 111
+#define IMX6SL_CLK_EPDC_AXI 112
+#define IMX6SL_CLK_LCDIF_AXI 113
+#define IMX6SL_CLK_LCDIF_PIX 114
+#define IMX6SL_CLK_EPDC_PIX 115
+#define IMX6SL_CLK_OCRAM 116
+#define IMX6SL_CLK_PWM1 117
+#define IMX6SL_CLK_PWM2 118
+#define IMX6SL_CLK_PWM3 119
+#define IMX6SL_CLK_PWM4 120
+#define IMX6SL_CLK_SDMA 121
+#define IMX6SL_CLK_SPDIF 122
+#define IMX6SL_CLK_SSI1 123
+#define IMX6SL_CLK_SSI2 124
+#define IMX6SL_CLK_SSI3 125
+#define IMX6SL_CLK_UART 126
+#define IMX6SL_CLK_UART_SERIAL 127
+#define IMX6SL_CLK_USBOH3 128
+#define IMX6SL_CLK_USDHC1 129
+#define IMX6SL_CLK_USDHC2 130
+#define IMX6SL_CLK_USDHC3 131
+#define IMX6SL_CLK_USDHC4 132
+#define IMX6SL_CLK_PLL4_AUDIO_DIV 133
+#define IMX6SL_CLK_SPBA 134
+#define IMX6SL_CLK_ENET 135
+#define IMX6SL_CLK_LVDS1_SEL 136
+#define IMX6SL_CLK_LVDS1_OUT 137
+#define IMX6SL_CLK_LVDS1_IN 138
+#define IMX6SL_CLK_ANACLK1 139
+#define IMX6SL_PLL1_BYPASS_SRC 140
+#define IMX6SL_PLL2_BYPASS_SRC 141
+#define IMX6SL_PLL3_BYPASS_SRC 142
+#define IMX6SL_PLL4_BYPASS_SRC 143
+#define IMX6SL_PLL5_BYPASS_SRC 144
+#define IMX6SL_PLL6_BYPASS_SRC 145
+#define IMX6SL_PLL7_BYPASS_SRC 146
+#define IMX6SL_CLK_PLL1 147
+#define IMX6SL_CLK_PLL2 148
+#define IMX6SL_CLK_PLL3 149
+#define IMX6SL_CLK_PLL4 150
+#define IMX6SL_CLK_PLL5 151
+#define IMX6SL_CLK_PLL6 152
+#define IMX6SL_CLK_PLL7 153
+#define IMX6SL_PLL1_BYPASS 154
+#define IMX6SL_PLL2_BYPASS 155
+#define IMX6SL_PLL3_BYPASS 156
+#define IMX6SL_PLL4_BYPASS 157
+#define IMX6SL_PLL5_BYPASS 158
+#define IMX6SL_PLL6_BYPASS 159
+#define IMX6SL_PLL7_BYPASS 160
+#define IMX6SL_CLK_SSI1_IPG 161
+#define IMX6SL_CLK_SSI2_IPG 162
+#define IMX6SL_CLK_SSI3_IPG 163
+#define IMX6SL_CLK_SPDIF_GCLK 164
+#define IMX6SL_CLK_END 165
+
+#endif /* __DT_BINDINGS_CLOCK_IMX6SL_H */
#define AT91_PINCTRL_DEGLITCH (1 << 2)
#define AT91_PINCTRL_PULL_DOWN (1 << 3)
#define AT91_PINCTRL_DIS_SCHMIT (1 << 4)
+#define AT91_PINCTRL_OUTPUT (1 << 7)
+#define AT91_PINCTRL_OUTPUT_VAL(x) ((x & 0x1) << 8)
#define AT91_PINCTRL_DEBOUNCE (1 << 16)
#define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17)
--- /dev/null
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_GXBB_AOCLK
+#define DT_BINDINGS_RESET_AMLOGIC_MESON_GXBB_AOCLK
+
+#define RESET_AO_REMOTE 0
+#define RESET_AO_I2C_MASTER 1
+#define RESET_AO_I2C_SLAVE 2
+#define RESET_AO_UART1 3
+#define RESET_AO_UART2 4
+#define RESET_AO_IR_BLASTER 5
+
+#endif
int max_freq;
fsl_ddr_cfg_regs_t *ddr_settings;
} fixed_ddr_parm_t;
+
+/**
+ * fsl_initdram() - Set up the SDRAM
+ *
+ * @return 0 if OK, -ve on error
+ */
+int fsl_initdram(void);
+
#endif
#ifndef _LINUX_MATH64_H
#define _LINUX_MATH64_H
+#include <div64.h>
+#include <linux/bitops.h>
#include <linux/types.h>
#if BITS_PER_LONG == 64
+#define div64_long(x, y) div64_s64((x), (y))
+#define div64_ul(x, y) div64_u64((x), (y))
+
/**
* div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder
*
return dividend / divisor;
}
+/**
+ * div64_u64_rem - unsigned 64bit divide with 64bit divisor and remainder
+ */
+static inline u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder)
+{
+ *remainder = dividend % divisor;
+ return dividend / divisor;
+}
+
/**
* div64_u64 - unsigned 64bit divide with 64bit divisor
*/
return dividend / divisor;
}
+/**
+ * div64_s64 - signed 64bit divide with 64bit divisor
+ */
+static inline s64 div64_s64(s64 dividend, s64 divisor)
+{
+ return dividend / divisor;
+}
+
#elif BITS_PER_LONG == 32
+#define div64_long(x, y) div_s64((x), (y))
+#define div64_ul(x, y) div_u64((x), (y))
+
#ifndef div_u64_rem
static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
{
extern s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder);
#endif
+#ifndef div64_u64_rem
+extern u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder);
+#endif
+
#ifndef div64_u64
extern u64 div64_u64(u64 dividend, u64 divisor);
#endif
+#ifndef div64_s64
+extern s64 div64_s64(s64 dividend, s64 divisor);
+#endif
+
#endif /* BITS_PER_LONG */
/**
u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder);
+static __always_inline u32
+__iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder)
+{
+ u32 ret = 0;
+
+ while (dividend >= divisor) {
+ /* The following asm() prevents the compiler from
+ optimising this loop into a modulo operation. */
+ asm("" : "+rm"(dividend));
+
+ dividend -= divisor;
+ ret++;
+ }
+
+ *remainder = dividend;
+
+ return ret;
+}
+
+#ifndef mul_u32_u32
+/*
+ * Many a GCC version messes this up and generates a 64x64 mult :-(
+ */
+static inline u64 mul_u32_u32(u32 a, u32 b)
+{
+ return (u64)a * b;
+}
+#endif
+
+#if defined(CONFIG_ARCH_SUPPORTS_INT128) && defined(__SIZEOF_INT128__)
+
+#ifndef mul_u64_u32_shr
+static inline u64 mul_u64_u32_shr(u64 a, u32 mul, unsigned int shift)
+{
+ return (u64)(((unsigned __int128)a * mul) >> shift);
+}
+#endif /* mul_u64_u32_shr */
+
+#ifndef mul_u64_u64_shr
+static inline u64 mul_u64_u64_shr(u64 a, u64 mul, unsigned int shift)
+{
+ return (u64)(((unsigned __int128)a * mul) >> shift);
+}
+#endif /* mul_u64_u64_shr */
+
+#else
+
+#ifndef mul_u64_u32_shr
+static inline u64 mul_u64_u32_shr(u64 a, u32 mul, unsigned int shift)
+{
+ u32 ah, al;
+ u64 ret;
+
+ al = a;
+ ah = a >> 32;
+
+ ret = mul_u32_u32(al, mul) >> shift;
+ if (ah)
+ ret += mul_u32_u32(ah, mul) << (32 - shift);
+
+ return ret;
+}
+#endif /* mul_u64_u32_shr */
+
+#ifndef mul_u64_u64_shr
+static inline u64 mul_u64_u64_shr(u64 a, u64 b, unsigned int shift)
+{
+ union {
+ u64 ll;
+ struct {
+#ifdef __BIG_ENDIAN
+ u32 high, low;
+#else
+ u32 low, high;
+#endif
+ } l;
+ } rl, rm, rn, rh, a0, b0;
+ u64 c;
+
+ a0.ll = a;
+ b0.ll = b;
+
+ rl.ll = mul_u32_u32(a0.l.low, b0.l.low);
+ rm.ll = mul_u32_u32(a0.l.low, b0.l.high);
+ rn.ll = mul_u32_u32(a0.l.high, b0.l.low);
+ rh.ll = mul_u32_u32(a0.l.high, b0.l.high);
+
+ /*
+ * Each of these lines computes a 64-bit intermediate result into "c",
+ * starting at bits 32-95. The low 32-bits go into the result of the
+ * multiplication, the high 32-bits are carried into the next step.
+ */
+ rl.l.high = c = (u64)rl.l.high + rm.l.low + rn.l.low;
+ rh.l.low = c = (c >> 32) + rm.l.high + rn.l.high + rh.l.low;
+ rh.l.high = (c >> 32) + rh.l.high;
+
+ /*
+ * The 128-bit result of the multiplication is in rl.ll and rh.ll,
+ * shift it right and throw away the high part of the result.
+ */
+ if (shift == 0)
+ return rl.ll;
+ if (shift < 64)
+ return (rl.ll >> shift) | (rh.ll << (64 - shift));
+ return rh.ll >> (shift & 63);
+}
+#endif /* mul_u64_u64_shr */
+
+#endif
+
+#ifndef mul_u64_u32_div
+static inline u64 mul_u64_u32_div(u64 a, u32 mul, u32 divisor)
+{
+ union {
+ u64 ll;
+ struct {
+#ifdef __BIG_ENDIAN
+ u32 high, low;
+#else
+ u32 low, high;
+#endif
+ } l;
+ } u, rl, rh;
+
+ u.ll = a;
+ rl.ll = mul_u32_u32(u.l.low, mul);
+ rh.ll = mul_u32_u32(u.l.high, mul) + rl.l.high;
+
+ /* Bits 32-63 of the result will be in rh.l.low. */
+ rl.l.high = do_div(rh.ll, divisor);
+
+ /* Bits 0-31 of the result will be in rl.l.low. */
+ do_div(rl.ll, divisor);
+
+ rl.l.high = rh.l.low;
+ return rl.ll;
+}
+#endif /* mul_u64_u32_div */
+
#endif /* _LINUX_MATH64_H */
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010 - 2011 NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _AES_REF_H_
+#define _AES_REF_H_
+
+#ifdef USE_HOSTCC
+/* Define compat stuff for use in fw_* tools. */
+typedef unsigned char u8;
+typedef unsigned int u32;
+#define debug(...) do {} while (0)
+#endif
+
+/*
+ * AES encryption library, with small code size, supporting only 128-bit AES
+ *
+ * AES is a stream cipher which works a block at a time, with each block
+ * in this case being AES_KEY_LENGTH bytes.
+ */
+
+enum {
+ AES_STATECOLS = 4, /* columns in the state & expanded key */
+ AES_KEYCOLS = 4, /* columns in a key */
+ AES_ROUNDS = 10, /* rounds in encryption */
+
+ AES_KEY_LENGTH = 128 / 8,
+ AES_EXPAND_KEY_LENGTH = 4 * AES_STATECOLS * (AES_ROUNDS + 1),
+};
+
+/**
+ * aes_expand_key() - Expand the AES key
+ *
+ * Expand a key into a key schedule, which is then used for the other
+ * operations.
+ *
+ * @key Key, of length AES_KEY_LENGTH bytes
+ * @expkey Buffer to place expanded key, AES_EXPAND_KEY_LENGTH
+ */
+void aes_expand_key(u8 *key, u8 *expkey);
+
+/**
+ * aes_encrypt() - Encrypt single block of data with AES 128
+ *
+ * @in Input data
+ * @expkey Expanded key to use for encryption (from aes_expand_key())
+ * @out Output data
+ */
+void aes_encrypt(u8 *in, u8 *expkey, u8 *out);
+
+/**
+ * aes_decrypt() - Decrypt single block of data with AES 128
+ *
+ * @in Input data
+ * @expkey Expanded key to use for decryption (from aes_expand_key())
+ * @out Output data
+ */
+void aes_decrypt(u8 *in, u8 *expkey, u8 *out);
+
+/**
+ * Apply chain data to the destination using EOR
+ *
+ * Each array is of length AES_KEY_LENGTH.
+ *
+ * @cbc_chain_data Chain data
+ * @src Source data
+ * @dst Destination data, which is modified here
+ */
+void aes_apply_cbc_chain_data(u8 *cbc_chain_data, u8 *src, u8 *dst);
+
+/**
+ * aes_cbc_encrypt_blocks() - Encrypt multiple blocks of data with AES CBC.
+ *
+ * @key_exp Expanded key to use
+ * @src Source data to encrypt
+ * @dst Destination buffer
+ * @num_aes_blocks Number of AES blocks to encrypt
+ */
+void aes_cbc_encrypt_blocks(u8 *key_exp, u8 *src, u8 *dst, u32 num_aes_blocks);
+
+/**
+ * Decrypt multiple blocks of data with AES CBC.
+ *
+ * @key_exp Expanded key to use
+ * @src Source data to decrypt
+ * @dst Destination buffer
+ * @num_aes_blocks Number of AES blocks to decrypt
+ */
+void aes_cbc_decrypt_blocks(u8 *key_exp, u8 *src, u8 *dst, u32 num_aes_blocks);
+
+#endif /* _AES_REF_H_ */
#else
#include <string.h>
#endif
-#include "aes.h"
+#include "uboot_aes.h"
/* forward s-box */
static const u8 sbox[256] = {
*
* Code generated for this function might be very inefficient
* for some CPUs. __div64_32() can be overridden by linking arch-specific
- * assembly versions such as arch/powerpc/lib/div64.S and arch/sh/lib/div64.S.
+ * assembly versions such as arch/ppc/lib/div64.S and arch/sh/lib/div64.S
+ * or by defining a preprocessor macro in arch/include/asm/div64.h.
*/
-#include <div64.h>
-#include <linux/types.h>
-#include <linux/compiler.h>
+#include <linux/compat.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
-uint32_t notrace __div64_32(uint64_t *n, uint32_t base)
+/* Not needed on 64bit architectures */
+#if BITS_PER_LONG == 32
+
+#ifndef __div64_32
+uint32_t __attribute__((weak)) __div64_32(uint64_t *n, uint32_t base)
{
uint64_t rem = *n;
uint64_t b = base;
*n = res;
return rem;
}
+EXPORT_SYMBOL(__div64_32);
+#endif
+
+#ifndef div_s64_rem
+s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder)
+{
+ u64 quotient;
+
+ if (dividend < 0) {
+ quotient = div_u64_rem(-dividend, abs(divisor), (u32 *)remainder);
+ *remainder = -*remainder;
+ if (divisor > 0)
+ quotient = -quotient;
+ } else {
+ quotient = div_u64_rem(dividend, abs(divisor), (u32 *)remainder);
+ if (divisor < 0)
+ quotient = -quotient;
+ }
+ return quotient;
+}
+EXPORT_SYMBOL(div_s64_rem);
+#endif
+
+/**
+ * div64_u64_rem - unsigned 64bit divide with 64bit divisor and remainder
+ * @dividend: 64bit dividend
+ * @divisor: 64bit divisor
+ * @remainder: 64bit remainder
+ *
+ * This implementation is a comparable to algorithm used by div64_u64.
+ * But this operation, which includes math for calculating the remainder,
+ * is kept distinct to avoid slowing down the div64_u64 operation on 32bit
+ * systems.
+ */
+#ifndef div64_u64_rem
+u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder)
+{
+ u32 high = divisor >> 32;
+ u64 quot;
+
+ if (high == 0) {
+ u32 rem32;
+ quot = div_u64_rem(dividend, divisor, &rem32);
+ *remainder = rem32;
+ } else {
+ int n = 1 + fls(high);
+ quot = div_u64(dividend >> n, divisor >> n);
+
+ if (quot != 0)
+ quot--;
+
+ *remainder = dividend - quot * divisor;
+ if (*remainder >= divisor) {
+ quot++;
+ *remainder -= divisor;
+ }
+ }
+
+ return quot;
+}
+EXPORT_SYMBOL(div64_u64_rem);
+#endif
+
+/**
+ * div64_u64 - unsigned 64bit divide with 64bit divisor
+ * @dividend: 64bit dividend
+ * @divisor: 64bit divisor
+ *
+ * This implementation is a modified version of the algorithm proposed
+ * by the book 'Hacker's Delight'. The original source and full proof
+ * can be found here and is available for use without restriction.
+ *
+ * 'http://www.hackersdelight.org/hdcodetxt/divDouble.c.txt'
+ */
+#ifndef div64_u64
+u64 div64_u64(u64 dividend, u64 divisor)
+{
+ u32 high = divisor >> 32;
+ u64 quot;
+
+ if (high == 0) {
+ quot = div_u64(dividend, divisor);
+ } else {
+ int n = 1 + fls(high);
+ quot = div_u64(dividend >> n, divisor >> n);
+
+ if (quot != 0)
+ quot--;
+ if ((dividend - quot * divisor) >= divisor)
+ quot++;
+ }
+
+ return quot;
+}
+EXPORT_SYMBOL(div64_u64);
+#endif
+
+/**
+ * div64_s64 - signed 64bit divide with 64bit divisor
+ * @dividend: 64bit dividend
+ * @divisor: 64bit divisor
+ */
+#ifndef div64_s64
+s64 div64_s64(s64 dividend, s64 divisor)
+{
+ s64 quot, t;
+
+ quot = div64_u64(abs(dividend), abs(divisor));
+ t = (dividend ^ divisor) >> 63;
+
+ return (quot ^ t) - t;
+}
+EXPORT_SYMBOL(div64_s64);
+#endif
+
+#endif /* BITS_PER_LONG == 32 */
+
+/*
+ * Iterative div/mod for use when dividend is not expected to be much
+ * bigger than divisor.
+ */
+u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder)
+{
+ return __iter_div_u64_rem(dividend, divisor, remainder);
+}
+EXPORT_SYMBOL(iter_div_u64_rem);
return 0;
}
+/**
+ * fdt_add_alias_regions() - Add regions covering the aliases that we want
+ *
+ * The /aliases node is not automatically included by fdtgrep unless the
+ * command-line arguments cause to be included (or not excluded). However
+ * aliases are special in that we generally want to include those which
+ * reference a node that fdtgrep includes.
+ *
+ * In fact we want to include only aliases for those nodes still included in
+ * the fdt, and drop the other aliases since they point to nodes that will not
+ * be present.
+ *
+ * This function scans the aliases and adds regions for those which we want
+ * to keep.
+ *
+ * @fdt: Device tree to scan
+ * @region: List of regions
+ * @count: Number of regions in the list so far (i.e. starting point for this
+ * function)
+ * @max_regions: Maximum number of regions in @region list
+ * @info: Place to put the region state
+ * @return number of regions after processing, or -FDT_ERR_NOSPACE if we did
+ * not have enough room in the regions table for the regions we wanted to add.
+ */
int fdt_add_alias_regions(const void *fdt, struct fdt_region *region, int count,
int max_regions, struct fdt_region_state *info)
{
if (node < 0)
return -FDT_ERR_NOTFOUND;
- /* The aliases node must come before the others */
+ /*
+ * Find the next node so that we know where the /aliases node ends. We
+ * need special handling if /aliases is the last node.
+ */
node_end = fdt_next_subnode(fdt, node);
- if (node_end <= 0)
- return -FDT_ERR_BADLAYOUT;
- node_end -= sizeof(fdt32_t);
+ if (node_end == -FDT_ERR_NOTFOUND)
+ /* Move back to the FDT_END_NODE tag of '/' */
+ node_end = fdt_size_dt_struct(fdt) - sizeof(fdt32_t) * 2;
+ else if (node_end < 0) /* other error */
+ return node_end;
+ node_end -= sizeof(fdt32_t); /* Move to FDT_END_NODE tag of /aliases */
did_alias_header = 0;
info->region = region;
fdt_add_region(info, base + offset, next - offset);
}
- /* Add the 'end' tag */
+ /* Add the FDT_END_NODE tag */
if (did_alias_header)
fdt_add_region(info, base + node_end, sizeof(fdt32_t));
#include <common.h>
#include <stdarg.h>
#include <serial.h>
+#include <linux/ctype.h>
struct printf_info {
char *bf; /* Digit buffer */
out_dgt(info, dgt);
}
+#ifdef CONFIG_SPL_NET_SUPPORT
+static void string(struct printf_info *info, char *s)
+{
+ char ch;
+
+ while ((ch = *s++))
+ out(info, ch);
+}
+
+static const char hex_asc[] = "0123456789abcdef";
+#define hex_asc_lo(x) hex_asc[((x) & 0x0f)]
+#define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4]
+
+static inline char *pack_hex_byte(char *buf, u8 byte)
+{
+ *buf++ = hex_asc_hi(byte);
+ *buf++ = hex_asc_lo(byte);
+ return buf;
+}
+
+static void mac_address_string(struct printf_info *info, u8 *addr,
+ bool separator)
+{
+ /* (6 * 2 hex digits), 5 colons and trailing zero */
+ char mac_addr[6 * 3];
+ char *p = mac_addr;
+ int i;
+
+ for (i = 0; i < 6; i++) {
+ p = pack_hex_byte(p, addr[i]);
+ if (separator && i != 5)
+ *p++ = ':';
+ }
+ *p = '\0';
+
+ string(info, mac_addr);
+}
+
+static char *put_dec_trunc(char *buf, unsigned int q)
+{
+ unsigned int d3, d2, d1, d0;
+ d1 = (q >> 4) & 0xf;
+ d2 = (q >> 8) & 0xf;
+ d3 = (q >> 12);
+
+ d0 = 6 * (d3 + d2 + d1) + (q & 0xf);
+ q = (d0 * 0xcd) >> 11;
+ d0 = d0 - 10 * q;
+ *buf++ = d0 + '0'; /* least significant digit */
+ d1 = q + 9 * d3 + 5 * d2 + d1;
+ if (d1 != 0) {
+ q = (d1 * 0xcd) >> 11;
+ d1 = d1 - 10 * q;
+ *buf++ = d1 + '0'; /* next digit */
+
+ d2 = q + 2 * d2;
+ if ((d2 != 0) || (d3 != 0)) {
+ q = (d2 * 0xd) >> 7;
+ d2 = d2 - 10 * q;
+ *buf++ = d2 + '0'; /* next digit */
+
+ d3 = q + 4 * d3;
+ if (d3 != 0) {
+ q = (d3 * 0xcd) >> 11;
+ d3 = d3 - 10 * q;
+ *buf++ = d3 + '0'; /* next digit */
+ if (q != 0)
+ *buf++ = q + '0'; /* most sign. digit */
+ }
+ }
+ }
+ return buf;
+}
+
+static void ip4_addr_string(struct printf_info *info, u8 *addr)
+{
+ /* (4 * 3 decimal digits), 3 dots and trailing zero */
+ char ip4_addr[4 * 4];
+ char temp[3]; /* hold each IP quad in reverse order */
+ char *p = ip4_addr;
+ int i, digits;
+
+ for (i = 0; i < 4; i++) {
+ digits = put_dec_trunc(temp, addr[i]) - temp;
+ /* reverse the digits in the quad */
+ while (digits--)
+ *p++ = temp[digits];
+ if (i != 3)
+ *p++ = '.';
+ }
+ *p = '\0';
+
+ string(info, ip4_addr);
+}
+#endif
+
+/*
+ * Show a '%p' thing. A kernel extension is that the '%p' is followed
+ * by an extra set of characters that are extended format
+ * specifiers.
+ *
+ * Right now we handle:
+ *
+ * - 'M' For a 6-byte MAC address, it prints the address in the
+ * usual colon-separated hex notation.
+ * - 'm' Same as above except there is no colon-separator.
+ * - 'I4'for IPv4 addresses printed in the usual way (dot-separated
+ * decimal).
+ */
+
+static void pointer(struct printf_info *info, const char *fmt, void *ptr)
+{
+#ifdef DEBUG
+ unsigned long num = (uintptr_t)ptr;
+ unsigned long div;
+#endif
+
+ switch (*fmt) {
+#ifdef DEBUG
+ case 'a':
+
+ switch (fmt[1]) {
+ case 'p':
+ default:
+ num = *(phys_addr_t *)ptr;
+ break;
+ }
+ break;
+#endif
+#ifdef CONFIG_SPL_NET_SUPPORT
+ case 'm':
+ return mac_address_string(info, ptr, false);
+ case 'M':
+ return mac_address_string(info, ptr, true);
+ case 'I':
+ if (fmt[1] == '4')
+ return ip4_addr_string(info, ptr);
+#endif
+ default:
+ break;
+ }
+#ifdef DEBUG
+ div = 1UL << (sizeof(long) * 8 - 4);
+ for (; div; div /= 0x10)
+ div_out(info, &num, div);
+#endif
+}
+
static int _vprintf(struct printf_info *info, const char *fmt, va_list va)
{
char ch;
case 's':
p = va_arg(va, char*);
break;
+ case 'p':
+ pointer(info, fmt, va_arg(va, void *));
+ while (isalnum(fmt[0]))
+ fmt++;
+ break;
case '%':
out(info, '%');
default:
CONFIG_ARC_UART_BASE
CONFIG_ARIA
CONFIG_ARIA_FPGA
+CONFIG_ARIES_M28_V10
CONFIG_ARM926EJS
CONFIG_ARMADA100
CONFIG_ARMADA100_FEC
CONFIG_DEFAULT_SPI_MODE
CONFIG_DEF_HWCONFIG
CONFIG_DELAY_ENVIRONMENT
-CONFIG_DENX_M28_V10
CONFIG_DESIGNWARE_ETH
CONFIG_DESIGNWARE_WATCHDOG
CONFIG_DEVCONCENTER
libfdt:
tools/_libfdt.so: $(patsubst %.o,%.c,$(LIBFDT_OBJS)) tools/libfdt_wrap.c
- LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= python $(srctree)/lib/libfdt/setup.py \
+ LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= ${PYTHON} $(srctree)/lib/libfdt/setup.py \
"$(_hostc_flags)" $^
mv _libfdt.so $@
# Possible build outcomes
OUTCOME_OK, OUTCOME_WARNING, OUTCOME_ERROR, OUTCOME_UNKNOWN = range(4)
-# Translate a commit subject into a valid filename
-trans_valid_chars = string.maketrans("/: ", "---")
+# Translate a commit subject into a valid filename (and handle unicode)
+trans_valid_chars = string.maketrans('/: ', '---')
+trans_valid_chars = trans_valid_chars.decode('latin-1')
BASE_CONFIG_FILENAMES = [
'u-boot.cfg', 'u-boot-spl.cfg', 'u-boot-tpl.cfg'
A native-endian integer value
"""
if sys.version_info > (3, 0):
+ if isinstance(val, bytes):
+ val = val.decode('utf-8')
val = val.encode('raw_unicode_escape')
return struct.unpack('>I', val)[0]
# include <mtd/mtd-user.h>
#endif
+#include "fw_env_private.h"
#include "fw_env.h"
struct env_opts default_opts = {
printf ("%s\n", env);
}
+ fw_env_close(opts);
return 0;
}
printf("%s=%s\n", name, val);
}
+ fw_env_close(opts);
+
return rc;
}
-int fw_env_close(struct env_opts *opts)
+int fw_env_flush(struct env_opts *opts)
{
int ret;
char *name, **valv;
char *value = NULL;
int valc;
+ int ret;
if (!opts)
opts = &default_opts;
valv = argv + 1;
valc = argc - 1;
- if (env_flags_validate_env_set_params(name, valv, valc) < 0)
+ if (env_flags_validate_env_set_params(name, valv, valc) < 0) {
+ fw_env_close(opts);
return -1;
+ }
len = 0;
for (i = 0; i < valc; ++i) {
free(value);
- return fw_env_close(opts);
+ ret = fw_env_flush(opts);
+ fw_env_close(opts);
+
+ return ret;
}
/*
if (strcmp(fname, "-") != 0)
fclose(fp);
- ret |= fw_env_close(opts);
+ ret |= fw_env_flush(opts);
+
+ fw_env_close(opts);
return ret;
}
{
int crc0, crc0_ok;
unsigned char flag0;
- void *addr0;
+ void *addr0 = NULL;
int crc1, crc1_ok;
unsigned char flag1;
- void *addr1;
+ void *addr1 = NULL;
int ret;
opts = &default_opts;
if (parse_config(opts)) /* should fill envdevices */
- return -1;
+ return -EINVAL;
addr0 = calloc(1, CUR_ENVSIZE);
if (addr0 == NULL) {
fprintf(stderr,
"Not enough memory for environment (%ld bytes)\n",
CUR_ENVSIZE);
- return -1;
+ ret = -ENOMEM;
+ goto open_cleanup;
}
/* read environment from FLASH to local buffer */
}
dev_current = 0;
- if (flash_io (O_RDONLY))
- return -1;
+ if (flash_io(O_RDONLY)) {
+ ret = -EIO;
+ goto open_cleanup;
+ }
crc0 = crc32 (0, (uint8_t *) environment.data, ENV_SIZE);
ret = env_aes_cbc_crypt(environment.data, 0,
opts->aes_key);
if (ret)
- return ret;
+ goto open_cleanup;
}
crc0_ok = (crc0 == *environment.crc);
fprintf(stderr,
"Not enough memory for environment (%ld bytes)\n",
CUR_ENVSIZE);
- return -1;
+ ret = -ENOMEM;
+ goto open_cleanup;
}
redundant = addr1;
* other pointers in environment still point inside addr0
*/
environment.image = addr1;
- if (flash_io (O_RDONLY))
- return -1;
+ if (flash_io(O_RDONLY)) {
+ ret = -EIO;
+ goto open_cleanup;
+ }
/* Check flag scheme compatibility */
if (DEVTYPE(dev_current) == MTD_NORFLASH &&
environment.flag_scheme = FLAG_INCREMENTAL;
} else {
fprintf (stderr, "Incompatible flash types!\n");
- return -1;
+ ret = -EINVAL;
+ goto open_cleanup;
}
crc1 = crc32 (0, (uint8_t *) redundant->data, ENV_SIZE);
ret = env_aes_cbc_crypt(redundant->data, 0,
opts->aes_key);
if (ret)
- return ret;
+ goto open_cleanup;
}
crc1_ok = (crc1 == redundant->crc);
#endif
}
return 0;
+
+open_cleanup:
+ if (addr0)
+ free(addr0);
+
+ if (addr1)
+ free(addr0);
+
+ return ret;
+}
+
+/*
+ * Simply free allocated buffer with environment
+ */
+int fw_env_close(struct env_opts *opts)
+{
+ if (environment.image)
+ free(environment.image);
+
+ environment.image = NULL;
+
+ return 0;
}
static int check_device_config(int dev)
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <aes.h>
#include <stdint.h>
-
-/* Pull in the current config to define the default environment */
-#include <linux/kconfig.h>
-
-#ifndef __ASSEMBLY__
-#define __ASSEMBLY__ /* get only #defines from config.h */
-#include <config.h>
-#undef __ASSEMBLY__
-#else
-#include <config.h>
-#endif
+#include <uboot_aes.h>
/*
- * To build the utility with the static configuration
- * comment out the next line.
- * See included "fw_env.config" sample file
- * for notes on configuration.
+ * Programs using the library must check which API is available,
+ * that varies depending on the U-Boot version.
+ * This can be changed in future
*/
-#define CONFIG_FILE "/etc/fw_env.config"
-
-#ifndef CONFIG_FILE
-#define HAVE_REDUND /* For systems with 2 env sectors */
-#define DEVICE1_NAME "/dev/mtd1"
-#define DEVICE2_NAME "/dev/mtd2"
-#define DEVICE1_OFFSET 0x0000
-#define ENV1_SIZE 0x4000
-#define DEVICE1_ESIZE 0x4000
-#define DEVICE1_ENVSECTORS 2
-#define DEVICE2_OFFSET 0x0000
-#define ENV2_SIZE 0x4000
-#define DEVICE2_ESIZE 0x4000
-#define DEVICE2_ENVSECTORS 2
-#endif
-
-#ifndef CONFIG_BAUDRATE
-#define CONFIG_BAUDRATE 115200
-#endif
-
-#ifndef CONFIG_BOOTDELAY
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#ifndef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-#endif
+#define FW_ENV_API_VERSION 1
struct env_opts {
#ifdef CONFIG_FILE
* @opts: how to retrieve environment from flash, defaults are used if NULL
*
* Description:
- * Uses fw_env_open, fw_env_write, fw_env_close
+ * Uses fw_env_open, fw_env_write, fw_env_flush
*
* Return:
* 0 on success, -1 on failure (modifies errno)
* @opts: encryption key, configuration file, defaults are used if NULL
*
* Description:
- * Uses fw_env_open, fw_env_write, fw_env_close
+ * Uses fw_env_open, fw_env_write, fw_env_flush
*
* Return:
* 0 success, -1 on failure (modifies errno)
int fw_env_write(char *name, char *value);
/**
- * fw_env_close - write the environment from RAM cache back to flash
+ * fw_env_flush - write the environment from RAM cache back to flash
+ *
+ * @opts: encryption key, configuration file, defaults are used if NULL
+ *
+ * Return:
+ * 0 on success, -1 on failure (modifies errno)
+ */
+int fw_env_flush(struct env_opts *opts);
+
+/**
+ * fw_env_close - free allocated structure and close env
*
* @opts: encryption key, configuration file, defaults are used if NULL
*
*/
int fw_env_close(struct env_opts *opts);
+
+/**
+ * fw_env_version - return the current version of the library
+ *
+ * Return:
+ * version string of the library
+ */
+char *fw_env_version(void);
+
unsigned long crc32(unsigned long, const unsigned char *, unsigned);
#include <stdlib.h>
#include <sys/file.h>
#include <unistd.h>
+#include "fw_env_private.h"
#include "fw_env.h"
#define CMD_PRINTENV "fw_printenv"
--- /dev/null
+/*
+ * (C) Copyright 2002-2008
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/* Pull in the current config to define the default environment */
+#include <linux/kconfig.h>
+
+#ifndef __ASSEMBLY__
+#define __ASSEMBLY__ /* get only #defines from config.h */
+#include <config.h>
+#undef __ASSEMBLY__
+#else
+#include <config.h>
+#endif
+
+/*
+ * To build the utility with the static configuration
+ * comment out the next line.
+ * See included "fw_env.config" sample file
+ * for notes on configuration.
+ */
+#define CONFIG_FILE "/etc/fw_env.config"
+
+#ifndef CONFIG_FILE
+#define HAVE_REDUND /* For systems with 2 env sectors */
+#define DEVICE1_NAME "/dev/mtd1"
+#define DEVICE2_NAME "/dev/mtd2"
+#define DEVICE1_OFFSET 0x0000
+#define ENV1_SIZE 0x4000
+#define DEVICE1_ESIZE 0x4000
+#define DEVICE1_ENVSECTORS 2
+#define DEVICE2_OFFSET 0x0000
+#define ENV2_SIZE 0x4000
+#define DEVICE2_ESIZE 0x4000
+#define DEVICE2_ENVSECTORS 2
+#endif
+
+#ifndef CONFIG_BAUDRATE
+#define CONFIG_BAUDRATE 115200
+#endif
+
+#ifndef CONFIG_BOOTDELAY
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#ifndef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} "\
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "\
+ "bootm"
+#endif
disp->flags);
if (count < 0) {
report_error("fdt_find_regions", count);
- if (count == -FDT_ERR_BADLAYOUT)
- fprintf(stderr,
- "/aliases node must come before all other nodes\n");
return -1;
}
if (count <= max_regions)
# We will get an error on read if the pty is closed
try:
data = os.read(self.stdout.fileno(), 1024)
+ if isinstance(data, bytes):
+ data = data.decode('utf-8')
except OSError:
pass
if data == "":
# We will get an error on read if the pty is closed
try:
data = os.read(self.stderr.fileno(), 1024)
+ if isinstance(data, bytes):
+ data = data.decode('utf-8')
except OSError:
pass
if data == "":
projects / u-boot / commitdiff