select DM_GPIO
select OF_CONTROL
imply FAT_WRITE
- imply ENV_IS_IN_FAT
config TARGET_VEXPRESS_CA15_TC2
bool "Support vexpress_ca15_tc2"
select SPL_PINCTRL if SPL
select SUPPORT_SPL
imply FAT_WRITE
- imply ENV_IS_IN_MMC
help
Support for UniPhier SoC family developed by Socionext Inc.
(formerly, System LSI Business Division of Panasonic Corporation)
bool "Exynos4 SoC family"
select CPU_V7
select BOARD_EARLY_INIT_F
- imply ENV_IS_IN_MMC
help
Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There
are multiple SoCs in this family including Exynos4210, Exynos4412,
config MX6SX
select ROM_UNIFIED_SECTIONS
bool
- imply ENV_IS_IN_MMC
config MX6SLL
select ROM_UNIFIED_SECTIONS
select ROM_UNIFIED_SECTIONS
imply CMD_FUSE
bool
- imply ENV_IS_IN_MMC
choice
prompt "MX7 board select"
config ARCH_INTEGRATOR_CP
bool "Support Integrator/CP platform"
select ARCH_CINTEGRATOR
- imply ENV_IS_IN_FLASH
endchoice
config ARCH_CINTEGRATOR
bool
- imply ENV_IS_IN_FLASH
choice
prompt "Integrator core module select"
config ARMADA_XP
bool
select ARMADA_32BIT
- imply ENV_IS_IN_SPI_FLASH
# ARMv8 SoCs...
config ARMADA_3700
select SUNXI_DRAM_DW_32BIT
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
- imply ENV_IS_IN_MMC
choice
prompt "Sunxi SoC Variant"
select ARM_CORTEX_CPU_IS_UP
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
- imply ENV_IS_IN_MMC
config MACH_SUN5I
bool "sun5i (Allwinner A13)"
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
- imply ENV_IS_IN_MMC
config MACH_SUN7I
bool "sun7i (Allwinner A20)"
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
- imply ENV_IS_IN_MMC
config MACH_SUN8I_A23
bool "sun8i (Allwinner A23)"
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
- imply ENV_IS_IN_MMC
config MACH_SUN8I_A33
bool "sun8i (Allwinner A33)"
select ARCH_SUPPORT_PSCI
select MACH_SUNXI_H3_H5
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
- imply ENV_IS_IN_MMC
config MACH_SUN8I_R40
bool "sun8i (Allwinner R40)"
bool "Tegra 64-bit common options"
select ARM64
select TEGRA_COMMON
- imply ENV_IS_IN_MMC
choice
prompt "Tegra SoC select"
select ARM_ERRATA_743622
select ARM_ERRATA_751472
select TEGRA_ARMV7_COMMON
- imply ENV_IS_IN_MMC
config TEGRA114
bool "Tegra114 family"
config TEGRA124
bool "Tegra124 family"
select TEGRA_ARMV7_COMMON
- imply ENV_IS_IN_MMC
imply REGMAP
imply SYSCON
config MCF52x2
bool
- imply ENV_IS_IN_FLASH
config MCF523x
bool
config MCF532x
bool
- imply ENV_IS_IN_FLASH
config MCF537x
bool
config MCF547x_8x
bool
- imply ENV_IS_IN_FLASH
# processor type
config M5208
config M5282
bool
select MCF52x2
- imply ENV_IS_IN_FLASH
config M5307
bool
config M547x
bool
select MCF547x_8x
- imply ENV_IS_IN_FLASH
config M548x
bool
select MCF547x_8x
- imply ENV_IS_IN_FLASH
choice
prompt "Target select"
config TARGET_M5475EVB
bool "Support M5475EVB"
select M547x
- imply ENV_IS_IN_FLASH
config TARGET_M5485EVB
bool "Support M5485EVB"
select M548x
- imply ENV_IS_IN_FLASH
config TARGET_AMCORE
bool "Support AMCORE"
select SUPPORTS_CPU_MIPS64_R1
select SUPPORTS_CPU_MIPS64_R2
select ROM_EXCEPTION_VECTORS
- imply ENV_IS_IN_FLASH
config TARGET_MALTA
bool "Support malta"
select SWAP_IO_SPACE
select MIPS_L1_CACHE_SHIFT_6
select ROM_EXCEPTION_VECTORS
- imply ENV_IS_IN_FLASH
config TARGET_VCT
bool "Support vct"
select CPU
select RAM
select SYSRESET
- imply ENV_IS_NOWHERE
config MACH_PIC32
bool "Support Microchip PIC32"
select SUPPORTS_CPU_MIPS64_R2
select SUPPORTS_CPU_MIPS64_R6
select ROM_EXCEPTION_VECTORS
- imply ENV_IS_IN_FLASH
config TARGET_XILFPGA
bool "Support Imagination Xilfpga"
bool "MIPS64 Release 2"
depends on SUPPORTS_CPU_MIPS64_R2
select 64BIT
- imply ENV_IS_IN_FLASH
help
Choose this option to build a kernel for release 2 through 5 of the
MIPS64 architecture.
bool "MPC86xx"
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
- imply ENV_IS_IN_FLASH
imply CMD_REGINFO
config 8xx
config TARGET_SBC8349
bool "Support sbc8349"
- imply ENV_IS_IN_FLASH
config TARGET_VE8313
bool "Support ve8313"
config TARGET_MPC832XEMDS
bool "Support MPC832XEMDS"
select BOARD_EARLY_INIT_F
- imply ENV_IS_IN_FLASH
config TARGET_MPC8349EMDS
bool "Support MPC8349EMDS"
config TARGET_MPC8349ITX
bool "Support MPC8349ITX"
imply CMD_IRQ
- imply ENV_IS_IN_FLASH
config TARGET_MPC837XEMDS
bool "Support MPC837XEMDS"
bool "Support suvd3"
imply CMD_CRAMFS
imply FS_CRAMFS
- imply ENV_IS_IN_FLASH
config TARGET_TUXX1
bool "Support tuxx1"
imply CMD_CRAMFS
imply FS_CRAMFS
- imply ENV_IS_IN_FLASH
config TARGET_TQM834X
bool "Support TQM834x"
config TARGET_STRIDER
bool "Support strider"
select SYS_FSL_ERRATUM_ESDHC111
- imply ENV_IS_IN_FLASH
imply CMD_PCA953X
endchoice
config TARGET_SBC8548
bool "Support sbc8548"
select ARCH_MPC8548
- imply ENV_IS_IN_FLASH
config TARGET_SOCRATES
bool "Support socrates"
config TARGET_MPC8548CDS
bool "Support MPC8548CDS"
select ARCH_MPC8548
- imply ENV_IS_IN_FLASH
config TARGET_MPC8555CDS
bool "Support MPC8555CDS"
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
- imply ENV_IS_IN_FLASH
imply CMD_REGINFO
config ARCH_MPC8555
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_ELBC
imply CMD_NAND
- imply ENV_IS_IN_FLASH
config ARCH_P1010
bool
select FSL_LAW
select SYS_FSL_HAS_DDR1
select SYS_FSL_HAS_DDR2
- imply ENV_IS_IN_FLASH
config FSL_LAW
bool
config CPU_SH2
bool
- imply ENV_IS_IN_FLASH
config CPU_SH2A
bool
select CPU_SH2
- imply ENV_IS_IN_FLASH
config CPU_SH3
bool
- imply ENV_IS_IN_FLASH
config CPU_SH4
bool
select ARCH_MISC_INIT if !EFI
imply HAVE_INTEL_ME if !EFI
imply ENABLE_MRC_CACHE
- imply ENV_IS_IN_SPI_FLASH
imply AHCI_PCI
imply ICH_SPI
imply INTEL_ICH6_GPIO
select ARCH_EARLY_INIT_R
imply HAVE_INTEL_ME
imply ENABLE_MRC_CACHE
- imply ENV_IS_IN_SPI_FLASH
imply AHCI_PCI
imply ICH_SPI
imply INTEL_BROADWELL_GPIO
config SYS_COREBOOT
bool
default y
- imply ENV_IS_NOWHERE
imply AHCI_PCI
imply E1000
imply ICH_SPI
select CACHE_MRC_BIN if HAVE_MRC
imply HAVE_INTEL_ME
imply ENABLE_MRC_CACHE
- imply ENV_IS_IN_SPI_FLASH
imply AHCI_PCI
imply ICH_SPI
imply INTEL_ICH6_GPIO
config QEMU
bool
select ARCH_EARLY_INIT_R
- imply ENV_IS_NOWHERE
imply AHCI_PCI
imply E1000
imply SYS_NS16550
select ARCH_EARLY_INIT_R
select ARCH_MISC_INIT
imply ENABLE_MRC_CACHE
- imply ENV_IS_IN_SPI_FLASH
imply ETH_DESIGNWARE
imply ICH_SPI
imply INTEL_ICH6_GPIO
select HAVE_FSP
select HAVE_CMC
select ARCH_EARLY_INIT_R
- imply ENV_IS_IN_SPI_FLASH
imply AHCI_PCI
imply ICH_SPI
imply INTEL_ICH6_GPIO
imply CMD_SPI
imply CMD_TIME
imply CMD_USB if USB
- imply ENV_IS_IN_FAT if MMC_OMAP_HS
CONFIG_PCI_XILINX=y
CONFIG_SYS_NS16550=y
CONFIG_LZ4=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_PCI_XILINX=y
CONFIG_SYS_NS16550=y
CONFIG_LZ4=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_PCI_XILINX=y
CONFIG_SYS_NS16550=y
CONFIG_LZ4=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_PCI_XILINX=y
CONFIG_SYS_NS16550=y
CONFIG_LZ4=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
+CONFIG_ENV_IS_IN_MMC=y
CONFIG_CPU=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_PCI=y
CONFIG_SYS_NS16550=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_PCI=y
CONFIG_SYS_NS16550=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_PCI=y
CONFIG_SYS_NS16550=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_PCI=y
CONFIG_SYS_NS16550=y
+CONFIG_ENV_IS_IN_FLASH=y
# CONFIG_CMD_UBIFS is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_NETCONSOLE=y
CONFIG_SPL_DM=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_SYS_NS16550=y
CONFIG_LZMA=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_SYS_NS16550=y
CONFIG_LZMA=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_SYS_NS16550=y
CONFIG_LZMA=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_SYS_NS16550=y
CONFIG_LZMA=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_MMC=y
CONFIG_CLK=y
CONFIG_CLK_RENESAS=y
CONFIG_SH_SDHI=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_MMC=y
CONFIG_CLK=y
CONFIG_CLK_RENESAS=y
CONFIG_SH_SDHI=y
menu "Environment"
+choice
+ prompt "Select the location of the environment"
+ default ENV_IS_IN_MMC if ARCH_SUNXI
+ default ENV_IS_IN_FAT if ARCH_BCM283X
+ default ENV_IS_IN_MMC if ARCH_UNIPHIER
+ default ENV_IS_IN_MMC if ARCH_EXYNOS4
+ default ENV_IS_IN_MMC if MX6SX || MX7D
+ default ENV_IS_IN_FLASH if ARCH_CINTEGRATOR
+ default ENV_IS_IN_SPI_FLASH if ARMADA_XP
+ default ENV_IS_IN_MMC if TEGRA30 || TEGRA124
+ default ENV_IS_IN_MMC if TEGRA_ARMV8_COMMON
+ default ENV_IS_IN_FLASH if ARCH_INTEGRATOR_CP
+ default ENV_IS_IN_FLASH if M548x || M547x || M5282 || MCF547x_8x
+ default ENV_IS_IN_FLASH if MCF532x || MCF52x2
+ default ENV_IS_IN_FLASH if MPC86xx || MPC83xx
+ default ENV_IS_IN_FLASH if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641
+ default ENV_IS_IN_FLASH if SH && !CPU_SH4
+ default ENV_IS_IN_SPI_FLASH if INTEL_BAYTRAIL
+ default ENV_IS_IN_SPI_FLASH if INTEL_BROADWELL
+ default ENV_IS_IN_SPI_FLASH if NORTHBRIDGE_INTEL_IVYBRIDGE
+ default ENV_IS_IN_SPI_FLASH if INTEL_QUARK
+ default ENV_IS_IN_SPI_FLASH if INTEL_QUEENSBAY
+ default ENV_IS_IN_FAT if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS
+ default ENV_IS_NOWHERE
+ help
+ At present the environment can be stored in only one place. Use this
+ option to select the location. This is either a device (where the
+ environemnt information is simply written to a fixed location or
+ partition on the device) or a filesystem (where the environment
+ information is written to a file).
+
+config ENV_IS_NOWHERE
+ bool "Environment is not stored"
+ help
+ Define this if you don't want to or can't have an environment stored
+ on a storage medium. In this case the environemnt will still exist
+ while U-Boot is running, but once U-Boot exits it will not be
+ stored. U-Boot will therefore always start up with a default
+ environment.
+
config ENV_IS_IN_DATAFLASH
bool "Environment in dataflash"
depends on !CHAIN_OF_TRUST
config ENV_IS_IN_MMC
bool "Environment in an MMC device"
depends on !CHAIN_OF_TRUST
- default y if ARCH_SUNXI
help
Define this if you have an MMC device which you want to use for the
environment.
You will probably want to define these to avoid a really noisy system
when storing the env in UBI.
-config ENV_IS_NOWHERE
- bool "Environment is not stored"
- help
- Define this if you don't want to or can't have an environment stored
- on a storage medium
+endchoice
config ENV_FAT_INTERFACE
string "Name of the block device for the environment"
#define CONFIG_SYS_MEMTEST_END 0x01000000
/* Environment */
-#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 0
#define CONFIG_ENV_SIZE (64 * 1024)
#define CONFIG_SH_SDHI_FREQ 200000000
/* Environment in eMMC, at the end of 2nd "boot sector" */
-#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
#define CONFIG_SYS_MMC_ENV_DEV 1
#define CONFIG_SYS_MMC_ENV_PART 2