ppc4xx: use correct io accessors for 4xx ethernet POST

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c
index 09f9a5fcb19031007b1d4466213faad674964a8a..4ac7491343f6332577c947b9fd19793c512b5d5e 100644 (file)
--- a/post/cpu/ppc4xx/ether.c
+++ b/post/cpu/ppc4xx/ether.c
@@ -117,11 +117,11 @@ static void ether_post_init (int devnum, int hw_addr)
        sync ();
 #endif
        /* reset emac */
-       out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST);
+       out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_SRST);
        sync ();
 
        for (i = 0;; i++) {
-               if (!(in32 (EMAC_M0 + hw_addr) & EMAC_M0_SRST))
+               if (!(in_be32 ((void*)(EMAC_M0 + hw_addr)) & EMAC_M0_SRST))
                        break;
                if (i >= 1000) {
                        printf ("Timeout resetting EMAC\n");
@@ -144,7 +144,7 @@ static void ether_post_init (int devnum, int hw_addr)
        else
                mode_reg |= EMAC_M1_OBCI_GT100;
 
-       out32 (EMAC_M1 + hw_addr, mode_reg);
+       out_be32 ((void*)(EMAC_M1 + hw_addr), mode_reg);
 
 #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
 
@@ -212,40 +212,40 @@ static void ether_post_init (int devnum, int hw_addr)
 
        /* set internal loopback mode */
 #ifdef CFG_POST_ETHER_EXT_LOOPBACK
-       out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | 0 |
-              EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
-              EMAC_M1_MF_100MBPS | EMAC_M1_IST |
-              in32 (EMAC_M1));
+       out_be32 ((void*)(EMAC_M1 + hw_addr), EMAC_M1_FDE | 0 |
+                 EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
+                 EMAC_M1_MF_100MBPS | EMAC_M1_IST |
+                 in_be32 ((void*)(EMAC_M1 + hw_addr)));
 #else
-       out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | EMAC_M1_ILE |
-              EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
-              EMAC_M1_MF_100MBPS | EMAC_M1_IST |
-              in32 (EMAC_M1));
+       out_be32 ((void*)(EMAC_M1 + hw_addr), EMAC_M1_FDE | EMAC_M1_ILE |
+                 EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
+                 EMAC_M1_MF_100MBPS | EMAC_M1_IST |
+                 in_be32 ((void*)(EMAC_M1 + hw_addr)));
 #endif
 
        /* set transmit enable & receive enable */
-       out32 (EMAC_M0 + hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);
+       out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_TXE | EMAC_M0_RXE);
 
        /* enable broadcast address */
-       out32 (EMAC_RXM + hw_addr, EMAC_RMR_BAE);
+       out_be32 ((void*)(EMAC_RXM + hw_addr), EMAC_RMR_BAE);
 
        /* set transmit request threshold register */
-       out32 (EMAC_TRTR + hw_addr, 0x18000000);        /* 256 byte threshold */
+       out_be32 ((void*)(EMAC_TRTR + hw_addr), 0x18000000);    /* 256 byte threshold */
 
        /* set receive  low/high water mark register */
 #if defined(CONFIG_440)
        /* 440s has a 64 byte burst length */
-       out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x80009000);
+       out_be32 ((void*)(EMAC_RX_HI_LO_WMARK + hw_addr), 0x80009000);
 #else
        /* 405s have a 16 byte burst length */
-       out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x0f002000);
+       out_be32 ((void*)(EMAC_RX_HI_LO_WMARK + hw_addr), 0x0f002000);
 #endif /* defined(CONFIG_440) */
-       out32 (EMAC_TXM1 + hw_addr, 0xf8640000);
+       out_be32 ((void*)(EMAC_TXM1 + hw_addr), 0xf8640000);
 
        /* Set fifo limit entry in tx mode 0 */
-       out32 (EMAC_TXM0 + hw_addr, 0x00000003);
+       out_be32 ((void*)(EMAC_TXM0 + hw_addr), 0x00000003);
        /* Frame gap set */
-       out32 (EMAC_I_FRAME_GAP_REG + hw_addr, 0x00000008);
+       out_be32 ((void*)(EMAC_I_FRAME_GAP_REG + hw_addr), 0x00000008);
        sync ();
 }
 
@@ -272,7 +272,7 @@ static void ether_post_halt (int devnum, int hw_addr)
                udelay (1000);
        }
        /* emac reset */
-       out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST);
+       out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_SRST);
 
 #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
        /* remove clocks for EMAC internal loopback  */
@@ -302,7 +302,7 @@ static void ether_post_send (int devnum, int hw_addr, void *packet, int length)
        flush_dcache_range((u32)tx.data_ptr, (u32)tx.data_ptr + length);
        sync ();
 
-       out32 (EMAC_TXM0 + hw_addr, in32 (EMAC_TXM0 + hw_addr) | EMAC_TXM0_GNP0);
+       out_be32 ((void*)(EMAC_TXM0 + hw_addr), in_be32 ((void*)(EMAC_TXM0 + hw_addr)) | EMAC_TXM0_GNP0);
        sync ();
 }