dtb-$(CONFIG_BOARD_COMTREND_AR5387UN) += comtrend,ar-5387un.dtb
dtb-$(CONFIG_BOARD_COMTREND_CT5361) += comtrend,ct-5361.dtb
dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb
+dtb-$(CONFIG_BOARD_COMTREND_WAP5813N) += comtrend,wap-5813n.dtb
dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb
dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb
--- /dev/null
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "brcm,bcm6368.dtsi"
+
+/ {
+ model = "Comtrend WAP-5813n";
+ compatible = "comtrend,wap-5813n", "brcm,bcm6368";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ inet_green {
+ label = "WAP-5813n:green:inet";
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_green {
+ label = "WAP-5813n:green:power";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ wps_green {
+ label = "WAP-5813n:green:wps";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+
+ power_red {
+ label = "WAP-5813n:red:power";
+ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ inet_red {
+ label = "WAP-5813n:red:inet";
+ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&pflash {
+ status = "okay";
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs,
and a BCM6362 (integrated).
+config BOARD_COMTREND_WAP5813N
+ bool "Comtrend WAP-5813n board"
+ depends on SOC_BMIPS_BCM6368
+ select BMIPS_SUPPORTS_BOOT_RAM
+ help
+ Comtrend WAP-5813n boards have a BCM6369 SoC with 64 MB of RAM and
+ 8 MB of flash (CFI).
+ Between its different peripherals there's a BCM53115 switch with 5
+ ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs,
+ and a BCM4322 (miniPCI).
+
config BOARD_HUAWEI_HG556A
bool "Huawei EchoLife HG556a"
depends on SOC_BMIPS_BCM6358
source "board/comtrend/ar5387un/Kconfig"
source "board/comtrend/ct5361/Kconfig"
source "board/comtrend/vr3032u/Kconfig"
+source "board/comtrend/wap5813n/Kconfig"
source "board/huawei/hg556a/Kconfig"
source "board/netgear/cg3100d/Kconfig"
source "board/sagem/f@st1704/Kconfig"
--- /dev/null
+if BOARD_COMTREND_WAP5813N
+
+config SYS_BOARD
+ default "wap5813n"
+
+config SYS_VENDOR
+ default "comtrend"
+
+config SYS_CONFIG_NAME
+ default "comtrend_wap5813n"
+
+endif
--- /dev/null
+COMTREND WAP-5813N BOARD
+M: Álvaro Fernández Rojas <noltari@gmail.com>
+S: Maintained
+F: board/comtrend/wap-5813n/
+F: include/configs/comtrend_wap-5813n.h
+F: configs/comtrend_wap5813n_ram_defconfig
--- /dev/null
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += wap-5813n.o
--- /dev/null
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
--- /dev/null
+CONFIG_MIPS=y
+CONFIG_SYS_TEXT_BASE=0x80010000
+CONFIG_ARCH_BMIPS=y
+CONFIG_SOC_BMIPS_BCM6368=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_DEFAULT_DEVICE_TREE="comtrend,wap-5813n"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="WAP-5813n # "
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+# CONFIG_CMD_MISC is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_DM_GPIO=y
+CONFIG_BCM6345_GPIO=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_CFI_FLASH=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_BCM6345=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_DM_SERIAL=y
+CONFIG_BCM6345_SERIAL=y
--- /dev/null
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <configs/bmips_common.h>
+#include <configs/bmips_bcm6368.h>
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+
+#define CONFIG_SYS_FLASH_CFI 1
+#define CONFIG_FLASH_CFI_DRIVER 1