#include <common.h>
#include <dm.h>
+#include <fsl_lpuart.h>
#include <watchdog.h>
#include <asm/io.h>
#include <serial.h>
DECLARE_GLOBAL_DATA_PTR;
+#define LPUART_FLAG_REGMAP_32BIT_REG BIT(0)
+#define LPUART_FLAG_REGMAP_ENDIAN_BIG BIT(1)
+
struct lpuart_serial_platdata {
- struct lpuart_fsl *reg;
+ void *reg;
+ ulong flags;
};
-#ifndef CONFIG_LPUART_32B_REG
-static void _lpuart_serial_setbrg(struct lpuart_fsl *base, int baudrate)
+static void lpuart_read32(u32 flags, u32 *addr, u32 *val)
+{
+ if (flags & LPUART_FLAG_REGMAP_32BIT_REG) {
+ if (flags & LPUART_FLAG_REGMAP_ENDIAN_BIG)
+ *(u32 *)val = in_be32(addr);
+ else
+ *(u32 *)val = in_le32(addr);
+ }
+}
+
+static void lpuart_write32(u32 flags, u32 *addr, u32 val)
+{
+ if (flags & LPUART_FLAG_REGMAP_32BIT_REG) {
+ if (flags & LPUART_FLAG_REGMAP_ENDIAN_BIG)
+ out_be32(addr, val);
+ else
+ out_le32(addr, val);
+ }
+}
+
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ 0
+#endif
+
+u32 __weak get_lpuart_clk(void)
{
- u32 clk = mxc_get_clock(MXC_UART_CLK);
+ return CONFIG_SYS_CLK_FREQ;
+}
+
+static bool is_lpuart32(struct udevice *dev)
+{
+ struct lpuart_serial_platdata *plat = dev->platdata;
+
+ return plat->flags & LPUART_FLAG_REGMAP_32BIT_REG;
+}
+
+static void _lpuart_serial_setbrg(struct lpuart_serial_platdata *plat,
+ int baudrate)
+{
+ struct lpuart_fsl *base = plat->reg;
+ u32 clk = get_lpuart_clk();
u16 sbr;
sbr = (u16)(clk / (16 * baudrate));
__raw_writeb(sbr & 0xff, &base->ubdl);
}
-static int _lpuart_serial_getc(struct lpuart_fsl *base)
+static int _lpuart_serial_getc(struct lpuart_serial_platdata *plat)
{
+ struct lpuart_fsl *base = plat->reg;
while (!(__raw_readb(&base->us1) & (US1_RDRF | US1_OR)))
WATCHDOG_RESET();
return __raw_readb(&base->ud);
}
-static void _lpuart_serial_putc(struct lpuart_fsl *base, const char c)
+static void _lpuart_serial_putc(struct lpuart_serial_platdata *plat,
+ const char c)
{
+ struct lpuart_fsl *base = plat->reg;
+
while (!(__raw_readb(&base->us1) & US1_TDRE))
WATCHDOG_RESET();
}
/* Test whether a character is in the RX buffer */
-static int _lpuart_serial_tstc(struct lpuart_fsl *base)
+static int _lpuart_serial_tstc(struct lpuart_serial_platdata *plat)
{
+ struct lpuart_fsl *base = plat->reg;
+
if (__raw_readb(&base->urcfifo) == 0)
return 0;
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*/
-static int _lpuart_serial_init(struct lpuart_fsl *base)
+static int _lpuart_serial_init(struct lpuart_serial_platdata *plat)
{
+ struct lpuart_fsl *base = (struct lpuart_fsl *)plat->reg;
u8 ctrl;
ctrl = __raw_readb(&base->uc2);
__raw_writeb(CFIFO_TXFLUSH | CFIFO_RXFLUSH, &base->ucfifo);
/* provide data bits, parity, stop bit, etc */
- _lpuart_serial_setbrg(base, gd->baudrate);
+ _lpuart_serial_setbrg(plat, gd->baudrate);
__raw_writeb(UC2_RE | UC2_TE, &base->uc2);
return 0;
}
-static int lpuart_serial_setbrg(struct udevice *dev, int baudrate)
-{
- struct lpuart_serial_platdata *plat = dev->platdata;
- struct lpuart_fsl *reg = plat->reg;
-
- _lpuart_serial_setbrg(reg, baudrate);
-
- return 0;
-}
-
-static int lpuart_serial_getc(struct udevice *dev)
-{
- struct lpuart_serial_platdata *plat = dev->platdata;
- struct lpuart_fsl *reg = plat->reg;
-
- return _lpuart_serial_getc(reg);
-}
-
-static int lpuart_serial_putc(struct udevice *dev, const char c)
-{
- struct lpuart_serial_platdata *plat = dev->platdata;
- struct lpuart_fsl *reg = plat->reg;
-
- _lpuart_serial_putc(reg, c);
-
- return 0;
-}
-
-static int lpuart_serial_pending(struct udevice *dev, bool input)
-{
- struct lpuart_serial_platdata *plat = dev->platdata;
- struct lpuart_fsl *reg = plat->reg;
-
- if (input)
- return _lpuart_serial_tstc(reg);
- else
- return __raw_readb(®->us1) & US1_TDRE ? 0 : 1;
-}
-
-static int lpuart_serial_probe(struct udevice *dev)
-{
- struct lpuart_serial_platdata *plat = dev->platdata;
- struct lpuart_fsl *reg = plat->reg;
-
- return _lpuart_serial_init(reg);
-}
-#else
-
-u32 __weak get_lpuart_clk(void)
-{
- return CONFIG_SYS_CLK_FREQ;
-}
-
-static void _lpuart32_serial_setbrg(struct lpuart_fsl *base, int baudrate)
+static void _lpuart32_serial_setbrg(struct lpuart_serial_platdata *plat,
+ int baudrate)
{
+ struct lpuart_fsl_reg32 *base = plat->reg;
u32 clk = get_lpuart_clk();
u32 sbr;
sbr = (clk / (16 * baudrate));
/* place adjustment later - n/32 BRFA */
- out_be32(&base->baud, sbr);
+ lpuart_write32(plat->flags, &base->baud, sbr);
}
-static int _lpuart32_serial_getc(struct lpuart_fsl *base)
+static int _lpuart32_serial_getc(struct lpuart_serial_platdata *plat)
{
+ struct lpuart_fsl_reg32 *base = plat->reg;
u32 stat;
- while (((stat = in_be32(&base->stat)) & STAT_RDRF) == 0) {
- out_be32(&base->stat, STAT_FLAGS);
+ lpuart_read32(plat->flags, &base->stat, &stat);
+ while ((stat & STAT_RDRF) == 0) {
+ lpuart_write32(plat->flags, &base->stat, STAT_FLAGS);
WATCHDOG_RESET();
+ lpuart_read32(plat->flags, &base->stat, &stat);
}
- return in_be32(&base->data) & 0x3ff;
+ /* Reuse stat */
+ lpuart_read32(plat->flags, &base->data, &stat);
+
+ return stat & 0x3ff;
}
-static void _lpuart32_serial_putc(struct lpuart_fsl *base, const char c)
+static void _lpuart32_serial_putc(struct lpuart_serial_platdata *plat,
+ const char c)
{
- while (!(in_be32(&base->stat) & STAT_TDRE))
+ struct lpuart_fsl_reg32 *base = plat->reg;
+ u32 stat;
+
+ while (true) {
+ lpuart_read32(plat->flags, &base->stat, &stat);
+
+ if ((stat & STAT_TDRE))
+ break;
+
WATCHDOG_RESET();
+ }
- out_be32(&base->data, c);
+ lpuart_write32(plat->flags, &base->data, c);
}
/* Test whether a character is in the RX buffer */
-static int _lpuart32_serial_tstc(struct lpuart_fsl *base)
+static int _lpuart32_serial_tstc(struct lpuart_serial_platdata *plat)
{
- if ((in_be32(&base->water) >> 24) == 0)
+ struct lpuart_fsl_reg32 *base = plat->reg;
+ u32 water;
+
+ lpuart_read32(plat->flags, &base->water, &water);
+
+ if ((water >> 24) == 0)
return 0;
return 1;
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*/
-static int _lpuart32_serial_init(struct lpuart_fsl *base)
+static int _lpuart32_serial_init(struct lpuart_serial_platdata *plat)
{
- u8 ctrl;
+ struct lpuart_fsl_reg32 *base = (struct lpuart_fsl_reg32 *)plat->reg;
+ u32 ctrl;
- ctrl = in_be32(&base->ctrl);
+ lpuart_read32(plat->flags, &base->ctrl, &ctrl);
ctrl &= ~CTRL_RE;
ctrl &= ~CTRL_TE;
- out_be32(&base->ctrl, ctrl);
+ lpuart_write32(plat->flags, &base->ctrl, ctrl);
- out_be32(&base->modir, 0);
- out_be32(&base->fifo, ~(FIFO_TXFE | FIFO_RXFE));
+ lpuart_write32(plat->flags, &base->modir, 0);
+ lpuart_write32(plat->flags, &base->fifo, ~(FIFO_TXFE | FIFO_RXFE));
- out_be32(&base->match, 0);
+ lpuart_write32(plat->flags, &base->match, 0);
/* provide data bits, parity, stop bit, etc */
- _lpuart32_serial_setbrg(base, gd->baudrate);
+ _lpuart32_serial_setbrg(plat, gd->baudrate);
- out_be32(&base->ctrl, CTRL_RE | CTRL_TE);
+ lpuart_write32(plat->flags, &base->ctrl, CTRL_RE | CTRL_TE);
return 0;
}
-static int lpuart32_serial_setbrg(struct udevice *dev, int baudrate)
+static int lpuart_serial_setbrg(struct udevice *dev, int baudrate)
{
struct lpuart_serial_platdata *plat = dev->platdata;
- struct lpuart_fsl *reg = plat->reg;
- _lpuart32_serial_setbrg(reg, baudrate);
+ if (is_lpuart32(dev))
+ _lpuart32_serial_setbrg(plat, baudrate);
+ else
+ _lpuart_serial_setbrg(plat, baudrate);
return 0;
}
-static int lpuart32_serial_getc(struct udevice *dev)
+static int lpuart_serial_getc(struct udevice *dev)
{
struct lpuart_serial_platdata *plat = dev->platdata;
- struct lpuart_fsl *reg = plat->reg;
- return _lpuart32_serial_getc(reg);
+ if (is_lpuart32(dev))
+ return _lpuart32_serial_getc(plat);
+
+ return _lpuart_serial_getc(plat);
}
-static int lpuart32_serial_putc(struct udevice *dev, const char c)
+static int lpuart_serial_putc(struct udevice *dev, const char c)
{
struct lpuart_serial_platdata *plat = dev->platdata;
- struct lpuart_fsl *reg = plat->reg;
- _lpuart32_serial_putc(reg, c);
+ if (is_lpuart32(dev))
+ _lpuart32_serial_putc(plat, c);
+ else
+ _lpuart_serial_putc(plat, c);
return 0;
}
-static int lpuart32_serial_pending(struct udevice *dev, bool input)
+static int lpuart_serial_pending(struct udevice *dev, bool input)
{
struct lpuart_serial_platdata *plat = dev->platdata;
struct lpuart_fsl *reg = plat->reg;
+ struct lpuart_fsl_reg32 *reg32 = plat->reg;
+ u32 stat;
+
+ if (is_lpuart32(dev)) {
+ if (input) {
+ return _lpuart32_serial_tstc(plat);
+ } else {
+ lpuart_read32(plat->flags, ®32->stat, &stat);
+ return stat & STAT_TDRE ? 0 : 1;
+ }
+ }
if (input)
- return _lpuart32_serial_tstc(reg);
+ return _lpuart_serial_tstc(plat);
else
- return in_be32(®->stat) & STAT_TDRE ? 0 : 1;
+ return __raw_readb(®->us1) & US1_TDRE ? 0 : 1;
}
-static int lpuart32_serial_probe(struct udevice *dev)
+static int lpuart_serial_probe(struct udevice *dev)
{
struct lpuart_serial_platdata *plat = dev->platdata;
- struct lpuart_fsl *reg = plat->reg;
- return _lpuart32_serial_init(reg);
+ if (is_lpuart32(dev))
+ return _lpuart32_serial_init(plat);
+ else
+ return _lpuart_serial_init(plat);
}
-#endif /* CONFIG_LPUART_32B_REG */
static int lpuart_serial_ofdata_to_platdata(struct udevice *dev)
{
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
- plat->reg = (struct lpuart_fsl *)addr;
+ plat->reg = (void *)addr;
+ plat->flags = dev_get_driver_data(dev);
return 0;
}
-#ifndef CONFIG_LPUART_32B_REG
static const struct dm_serial_ops lpuart_serial_ops = {
.putc = lpuart_serial_putc,
.pending = lpuart_serial_pending,
};
static const struct udevice_id lpuart_serial_ids[] = {
- { .compatible = "fsl,vf610-lpuart" },
+ { .compatible = "fsl,ls1021a-lpuart", .data =
+ LPUART_FLAG_REGMAP_32BIT_REG | LPUART_FLAG_REGMAP_ENDIAN_BIG },
+ { .compatible = "fsl,vf610-lpuart"},
{ }
};
.ops = &lpuart_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
};
-#else /* CONFIG_LPUART_32B_REG */
-static const struct dm_serial_ops lpuart32_serial_ops = {
- .putc = lpuart32_serial_putc,
- .pending = lpuart32_serial_pending,
- .getc = lpuart32_serial_getc,
- .setbrg = lpuart32_serial_setbrg,
-};
-
-static const struct udevice_id lpuart32_serial_ids[] = {
- { .compatible = "fsl,ls1021a-lpuart" },
- { }
-};
-
-U_BOOT_DRIVER(serial_lpuart32) = {
- .name = "serial_lpuart32",
- .id = UCLASS_SERIAL,
- .of_match = lpuart32_serial_ids,
- .ofdata_to_platdata = lpuart_serial_ofdata_to_platdata,
- .platdata_auto_alloc_size = sizeof(struct lpuart_serial_platdata),
- .probe = lpuart32_serial_probe,
- .ops = &lpuart32_serial_ops,
- .flags = DM_FLAG_PRE_RELOC,
-};
-#endif /* CONFIG_LPUART_32B_REG */
projects / u-boot / commitdiff