]> git.sur5r.net Git - u-boot/commitdiff
s5pc1xx: Add support for Samsung Goni board
authorMinkyu Kang <mk7.kang@samsung.com>
Mon, 31 May 2010 13:02:42 +0000 (22:02 +0900)
committerTom <Tom@bumblecow.com>
Mon, 14 Jun 2010 23:15:20 +0000 (18:15 -0500)
This patch adds support for the Samsung Goni board (S5PC110 SoC)

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
MAINTAINERS
MAKEALL
Makefile
board/samsung/goni/Makefile [new file with mode: 0644]
board/samsung/goni/config.mk [new file with mode: 0644]
board/samsung/goni/goni.c [new file with mode: 0644]
board/samsung/goni/lowlevel_init.S [new file with mode: 0644]
board/samsung/goni/mem_setup.S [new file with mode: 0644]
board/samsung/goni/onenand.c [new file with mode: 0644]
include/configs/s5p_goni.h [new file with mode: 0644]

index 4cf8f3538f1a6a43e08a93cb4129303c4b636341..710f6eb5d6d94ac2f90dd10c7b83cf41b087a392 100644 (file)
@@ -635,14 +635,15 @@ Simon Kagstrom <simon.kagstrom@netinsight.net>
 
        openrd_base     ARM926EJS (Kirkwood SoC)
 
-Minkyu Kang <mk7.kang@samsung.com>
-
-       SMDKC100        ARM CORTEX-A8 (S5PC100 SoC)
-
 Nishant Kamat <nskamat@ti.com>
 
        omap1610h2      ARM926EJS
 
+Minkyu Kang <mk7.kang@samsung.com>
+
+       s5p_goni        ARM CORTEX-A8 (S5PC110 SoC)
+       SMDKC100        ARM CORTEX-A8 (S5PC100 SoC)
+
 Frederik Kriewitz <frederik@kriewitz.eu>
 
        devkit8000      ARM CORTEX-A8 (OMAP3530 SoC)
diff --git a/MAKEALL b/MAKEALL
index 4ba21064c4cc067c9ed9fe383100b4671c53068f..b07b6f467d4bd562b292cbff56f5e071c1140d72 100755 (executable)
--- a/MAKEALL
+++ b/MAKEALL
@@ -652,6 +652,7 @@ LIST_ARM_CORTEX_A8="                \
        omap3_sdp3430           \
        omap3_zoom1             \
        omap3_zoom2             \
+       s5p_goni                \
        smdkc100                \
 "
 
index a01df551790027b2189e3d9d23a14dd150b8f2d3..36aac29e85fca37ba454e4fdd2ec47222e183baf 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -3186,6 +3186,9 @@ omap3_zoom1_config :      unconfig
 omap3_zoom2_config :   unconfig
        @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
 
+s5p_goni_config:       unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 goni samsung s5pc1xx
+
 smdkc100_config:       unconfig
        @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
 
diff --git a/board/samsung/goni/Makefile b/board/samsung/goni/Makefile
new file mode 100644 (file)
index 0000000..9b4c886
--- /dev/null
@@ -0,0 +1,54 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).a
+
+COBJS-y        := goni.o onenand.o
+SOBJS  := lowlevel_init.o
+
+SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS-y))
+SOBJS  := $(addprefix $(obj),$(SOBJS))
+
+$(LIB):        $(obj).depend $(SOBJS) $(OBJS)
+       $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS)
+
+clean:
+       rm -f $(SOBJS) $(OBJS)
+
+distclean:     clean
+       rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/goni/config.mk b/board/samsung/goni/config.mk
new file mode 100644 (file)
index 0000000..2da9ca1
--- /dev/null
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2008 # Samsung Elecgtronics
+# Kyungmin Park <kyungmin.park@samsung.com>
+#
+
+# On S5PC100 we use the 128 MiB OneDRAM bank at
+#
+# 0x30000000 to 0x35000000 (80MiB)
+# 0x38000000 to 0x40000000 (128MiB)
+#
+# On S5PC110 we use the 128 MiB OneDRAM bank at
+#
+# 0x30000000 to 0x35000000 (80MiB)
+# 0x40000000 to 0x50000000 (256MiB)
+#
+TEXT_BASE = 0x34800000
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
new file mode 100644 (file)
index 0000000..e512c59
--- /dev/null
@@ -0,0 +1,55 @@
+/*
+ *  Copyright (C) 2008-2009 Samsung Electronics
+ *  Minkyu Kang <mk7.kang@samsung.com>
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+       gd->bd->bi_arch_number = MACH_TYPE_GONI;
+       gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+       return 0;
+}
+
+int dram_init(void)
+{
+       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+       gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+       gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+       gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+       gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+       gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+
+       return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+       puts("Board:\tGoni\n");
+       return 0;
+}
+#endif
diff --git a/board/samsung/goni/lowlevel_init.S b/board/samsung/goni/lowlevel_init.S
new file mode 100644 (file)
index 0000000..4b72992
--- /dev/null
@@ -0,0 +1,585 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/power.h>
+
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ * r7 has S5PC100 GPIO base, 0xE0300000
+ * r8 has real GPIO base, 0xE0300000, 0xE0200000 at S5PC100, S5PC110 repectively
+ * r9 has Mobile DDR size, 1 means 1GiB, 2 means 2GiB and so on
+ */
+
+_TEXT_BASE:
+       .word   TEXT_BASE
+
+       .globl lowlevel_init
+lowlevel_init:
+       mov     r11, lr
+
+       /* r5 has always zero */
+       mov     r5, #0
+
+       ldr     r7, =S5PC100_GPIO_BASE
+       ldr     r8, =S5PC100_GPIO_BASE
+       /* Read CPU ID */
+       ldr     r2, =S5PC1XX_PRO_ID
+       ldr     r0, [r2]
+       mov     r1, #0x00010000
+       and     r0, r0, r1
+       cmp     r0, r5
+       beq     100f
+       ldr     r8, =S5PC110_GPIO_BASE
+100:
+       /* Turn on KEY_LED_ON [GPJ4(1)] XMSMWEN */
+       cmp     r7, r8
+       beq     skip_check_didle                        @ Support C110 only
+
+       ldr     r0, =S5PC110_RST_STAT
+       ldr     r1, [r0]
+       and     r1, r1, #0x000D0000
+       cmp     r1, #(0x1 << 19)                        @ DEEPIDLE_WAKEUP
+       beq     didle_wakeup
+       cmp     r7, r8
+
+skip_check_didle:
+       addeq   r0, r8, #0x280                          @ S5PC100_GPIO_J4
+       addne   r0, r8, #0x2C0                          @ S5PC110_GPIO_J4
+       ldr     r1, [r0, #0x0]                          @ GPIO_CON_OFFSET
+       bic     r1, r1, #(0xf << 4)                     @ 1 * 4-bit
+       orr     r1, r1, #(0x1 << 4)
+       str     r1, [r0, #0x0]                          @ GPIO_CON_OFFSET
+
+       ldr     r1, [r0, #0x4]                          @ GPIO_DAT_OFFSET
+#ifdef CONFIG_ONENAND_IPL
+       orr     r1, r1, #(1 << 1)                       @ 1 * 1-bit
+#else
+       bic     r1, r1, #(1 << 1)
+#endif
+       str     r1, [r0, #0x4]                          @ GPIO_DAT_OFFSET
+
+       /* Don't setup at s5pc100 */
+       beq     100f
+
+       /*
+        * Initialize Async Register Setting for EVT1
+        * Because we are setting EVT1 as the default value of EVT0,
+        * setting EVT0 as well does not make things worse.
+        * Thus, for the simplicity, we set for EVT0, too
+        *
+        * The "Async Registers" are:
+        *      0xE0F0_0000
+        *      0xE1F0_0000
+        *      0xF180_0000
+        *      0xF190_0000
+        *      0xF1A0_0000
+        *      0xF1B0_0000
+        *      0xF1C0_0000
+        *      0xF1D0_0000
+        *      0xF1E0_0000
+        *      0xF1F0_0000
+        *      0xFAF0_0000
+        */
+       ldr     r0, =0xe0f00000
+       ldr     r1, [r0]
+       bic     r1, r1, #0x1
+       str     r1, [r0]
+
+       ldr     r0, =0xe1f00000
+       ldr     r1, [r0]
+       bic     r1, r1, #0x1
+       str     r1, [r0]
+
+       ldr     r0, =0xf1800000
+       ldr     r1, [r0]
+       bic     r1, r1, #0x1
+       str     r1, [r0]
+
+       ldr     r0, =0xf1900000
+       ldr     r1, [r0]
+       bic     r1, r1, #0x1
+       str     r1, [r0]
+
+       ldr     r0, =0xf1a00000
+       ldr     r1, [r0]
+       bic     r1, r1, #0x1
+       str     r1, [r0]
+
+       ldr     r0, =0xf1b00000
+       ldr     r1, [r0]
+       bic     r1, r1, #0x1
+       str     r1, [r0]
+
+       ldr     r0, =0xf1c00000
+       ldr     r1, [r0]
+       bic     r1, r1, #0x1
+       str     r1, [r0]
+
+       ldr     r0, =0xf1d00000
+       ldr     r1, [r0]
+       bic     r1, r1, #0x1
+       str     r1, [r0]
+
+       ldr     r0, =0xf1e00000
+       ldr     r1, [r0]
+       bic     r1, r1, #0x1
+       str     r1, [r0]
+
+       ldr     r0, =0xf1f00000
+       ldr     r1, [r0]
+       bic     r1, r1, #0x1
+       str     r1, [r0]
+
+       ldr     r0, =0xfaf00000
+       ldr     r1, [r0]
+       bic     r1, r1, #0x1
+       str     r1, [r0]
+
+       /*
+        * Diable ABB block to reduce sleep current at low temperature
+        * Note that it's hidden register setup don't modify it
+        */
+       ldr     r0, =0xE010C300
+       ldr     r1, =0x00800000
+       str     r1, [r0]
+
+100:
+       /* IO retension release */
+       ldreq   r0, =S5PC100_OTHERS                     @ 0xE0108200
+       ldrne   r0, =S5PC110_OTHERS                     @ 0xE010E000
+       ldr     r1, [r0]
+       ldreq   r2, =(1 << 31)                          @ IO_RET_REL
+       ldrne   r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28))
+       orr     r1, r1, r2
+       /* Do not release retention here for S5PC110 */
+       streq   r1, [r0]
+
+#ifndef CONFIG_ONENAND_IPL
+       /* Disable Watchdog */
+       ldreq   r0, =S5PC100_WATCHDOG_BASE              @ 0xEA200000
+       ldrne   r0, =S5PC110_WATCHDOG_BASE              @ 0xE2700000
+       str     r5, [r0]
+
+       /* setting SRAM */
+       ldreq   r0, =S5PC100_SROMC_BASE
+       ldrne   r0, =S5PC110_SROMC_BASE
+       ldr     r1, =0x9
+       str     r1, [r0]
+#endif
+
+       /* S5PC100 has 3 groups of interrupt sources */
+       ldreq   r0, =S5PC100_VIC0_BASE                  @ 0xE4000000
+       ldrne   r0, =S5PC110_VIC0_BASE                  @ 0xF2000000
+       add     r1, r0, #0x00100000
+       add     r2, r0, #0x00200000
+
+       /* Disable all interrupts (VIC0, VIC1 and VIC2) */
+       mvn     r3, #0x0
+       str     r3, [r0, #0x14]                         @ INTENCLEAR
+       str     r3, [r1, #0x14]                         @ INTENCLEAR
+       str     r3, [r2, #0x14]                         @ INTENCLEAR
+
+#ifndef CONFIG_ONENAND_IPL
+       /* Set all interrupts as IRQ */
+       str     r5, [r0, #0xc]                          @ INTSELECT
+       str     r5, [r1, #0xc]                          @ INTSELECT
+       str     r5, [r2, #0xc]                          @ INTSELECT
+
+       /* Pending Interrupt Clear */
+       str     r5, [r0, #0xf00]                        @ INTADDRESS
+       str     r5, [r1, #0xf00]                        @ INTADDRESS
+       str     r5, [r2, #0xf00]                        @ INTADDRESS
+#endif
+
+#ifndef CONFIG_ONENAND_IPL
+       /* for UART */
+       bl      uart_asm_init
+
+       bl      internal_ram_init
+#endif
+
+#ifdef CONFIG_ONENAND_IPL
+       /* init system clock */
+       bl      system_clock_init
+
+       /* OneNAND Sync Read Support at S5PC110 only
+        * RM[15]       : Sync Read
+        * BRWL[14:12]  : 7 CLK
+        * BL[11:9]     : Continuous
+        * VHF[3]       : Very High Frequency Enable (Over 83MHz)
+        * HF[2]        : High Frequency Enable (Over 66MHz)
+        * WM[1]        : Sync Write
+        */
+       cmp     r7, r8
+       ldrne   r1, =0xE006
+       ldrne   r0, =0xB001E442
+       strneh  r1, [r0]
+
+       /*
+        * GCE[26]      : Gated Clock Enable
+        * RPE[17]      : Enables Read Prefetch
+        */
+       ldrne   r1, =((1 << 26) | (1 << 17) | 0xE006)
+       ldrne   r0, =0xB0600000
+       strne   r1, [r0, #0x100]                        @ ONENAND_IF_CTRL
+       ldrne   r1, =0x1212
+       strne   r1, [r0, #0x108]
+
+       /* Board detection to set proper memory configuration */
+       cmp     r7, r8
+       moveq   r9, #1          /* r9 has 1Gib default at s5pc100 */
+       movne   r9, #2          /* r9 has 2Gib default at s5pc110 */
+
+       ldr     r2, =0xE0200200
+       ldr     r4, [r2, #0x48]
+
+       bic     r1, r4, #(0x3F << 4)    /* PULLUP_DISABLE: 3 * 2-bit */
+       bic     r1, r1, #(0x3 << 2)     /* PULLUP_DISABLE: 2 * 2-bit */
+       bic     r1, r1, #(0x3 << 14)    /* PULLUP_DISABLE: 2 * 2-bit */
+       str     r1, [r2, #0x48]
+       /* For write completion */
+       nop
+       nop
+
+       ldr     r3, [r2, #0x44]
+       and     r1, r3, #(0x7 << 2)
+       mov     r1, r1, lsr #2
+       cmp     r1, #0x5
+       moveq   r9, #3
+       cmp     r1, #0x6
+       moveq   r9, #1
+       cmp     r1, #0x7
+       moveq   r9, #2
+       and     r0, r3, #(0x1 << 1)
+       mov     r0, r0, lsr #1
+       orr     r1, r1, r0, lsl #3
+       cmp     r1, #0x8
+       moveq   r9, #3
+       and     r1, r3, #(0x7 << 2)
+       mov     r1, r1, lsr #2
+       and     r0, r3, #(0x1 << 7)
+       mov     r0, r0, lsr #7
+       orr     r1, r1, r0, lsl #3
+       cmp     r1, #0x9
+       moveq   r9, #3
+       str     r4, [r2, #0x48]         /* Restore PULLUP configuration */
+
+       bl      mem_ctrl_asm_init
+
+       /* Wakeup support. Don't know if it's going to be used, untested. */
+       ldreq   r0, =S5PC100_RST_STAT
+       ldrne   r0, =S5PC110_RST_STAT
+       ldr     r1, [r0]
+       biceq   r1, r1, #0xfffffff7
+       moveq   r2, #(1 << 3)
+       bicne   r1, r1, #0xfffeffff
+       movne   r2, #(1 << 16)
+       cmp     r1, r2
+       bne     1f
+wakeup:
+       /* turn off L2 cache */
+       bl      l2_cache_disable
+
+       cmp     r7, r8
+       ldreq   r0, =0xC100
+       ldrne   r0, =0xC110
+
+       /* invalidate L2 cache also */
+       bl      invalidate_dcache
+
+       /* turn on L2 cache */
+       bl      l2_cache_enable
+
+       cmp     r7, r8
+       /* Load return address and jump to kernel */
+       ldreq   r0, =S5PC100_INFORM0
+       ldrne   r0, =S5PC110_INFORM0
+
+       /* r1 = physical address of s5pc1xx_cpu_resume function */
+       ldr     r1, [r0]
+
+       /* Jump to kernel (sleep-s5pc1xx.S) */
+       mov     pc, r1
+       nop
+       nop
+#else
+       cmp     r7, r8
+       /* Clear wakeup status register */
+       ldreq   r0, =S5PC100_WAKEUP_STAT
+       ldrne   r0, =S5PC110_WAKEUP_STAT
+       ldr     r1, [r0]
+       str     r1, [r0]
+
+       /* IO retension release */
+       ldreq   r0, =S5PC100_OTHERS                     @ 0xE0108200
+       ldrne   r0, =S5PC110_OTHERS                     @ 0xE010E000
+       ldr     r1, [r0]
+       ldreq   r2, =(1 << 31)                          @ IO_RET_REL
+       ldrne   r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28))
+       orr     r1, r1, r2
+       str     r1, [r0]
+
+#endif
+       b       1f
+
+didle_wakeup:
+       /* Wait when APLL is locked */
+       ldr     r0, =0xE0100100                 @ S5PC110_APLL_CON
+lockloop:
+       ldr     r1, [r0]
+       and     r1, r1, #(1 << 29)
+       cmp     r1, #(1 << 29)
+       bne     lockloop
+
+       ldr     r0, =S5PC110_INFORM0
+       ldr     r1, [r0]
+       mov     pc, r1
+       nop
+       nop
+       nop
+       nop
+       nop
+
+1:
+       mov     lr, r11
+       mov     pc, lr
+
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+system_clock_init:
+       ldr     r0, =S5PC1XX_CLOCK_BASE         @ 0xE0100000
+
+       /* Check S5PC100 */
+       cmp     r7, r8
+       bne     110f
+100:
+       /* Set Lock Time */
+       ldr     r1, =0xe10                      @ Locktime : 0xe10 = 3600
+       str     r1, [r0, #0x000]                @ S5PC100_APLL_LOCK
+       str     r1, [r0, #0x004]                @ S5PC100_MPLL_LOCK
+       str     r1, [r0, #0x008]                @ S5PC100_EPLL_LOCK
+       str     r1, [r0, #0x00C]                @ S5PC100_HPLL_LOCK
+
+       /* S5P_APLL_CON */
+       ldr     r1, =0x81bc0400         @ SDIV 0, PDIV 4, MDIV 444 (1333MHz)
+       str     r1, [r0, #0x100]
+       /* S5P_MPLL_CON */
+       ldr     r1, =0x80590201         @ SDIV 1, PDIV 2, MDIV 89 (267MHz)
+       str     r1, [r0, #0x104]
+       /* S5P_EPLL_CON */
+       ldr     r1, =0x80870303         @ SDIV 3, PDIV 3, MDIV 135 (67.5MHz)
+       str     r1, [r0, #0x108]
+       /* S5P_HPLL_CON */
+       ldr     r1, =0x80600603         @ SDIV 3, PDIV 6, MDIV 96
+       str     r1, [r0, #0x10C]
+
+       ldr     r1, [r0, #0x300]
+       ldr     r2, =0x00003fff
+       bic     r1, r1, r2
+       ldr     r2, =0x00011301
+
+       orr     r1, r1, r2
+       str     r1, [r0, #0x300]
+       ldr     r1, [r0, #0x304]
+       ldr     r2, =0x00011110
+       orr     r1, r1, r2
+       str     r1, [r0, #0x304]
+       ldr     r1, =0x00000001
+       str     r1, [r0, #0x308]
+
+       /* Set Source Clock */
+       ldr     r1, =0x00001111                 @ A, M, E, HPLL Muxing
+       str     r1, [r0, #0x200]                @ S5PC1XX_CLK_SRC0
+
+       b       200f
+110:
+       ldr     r0, =0xE010C000                 @ S5PC110_PWR_CFG
+
+       /* Set OSC_FREQ value */
+       ldr     r1, =0xf
+       str     r1, [r0, #0x100]                @ S5PC110_OSC_FREQ
+
+       /* Set MTC_STABLE value */
+       ldr     r1, =0xffffffff
+       str     r1, [r0, #0x110]                @ S5PC110_MTC_STABLE
+
+       /* Set CLAMP_STABLE value */
+       ldr     r1, =0x3ff03ff
+       str     r1, [r0, #0x114]                @ S5PC110_CLAMP_STABLE
+
+       ldr     r0, =S5PC1XX_CLOCK_BASE         @ 0xE0100000
+
+       /* Set Clock divider */
+       ldr     r1, =0x14131330                 @ 1:1:4:4, 1:4:5
+       str     r1, [r0, #0x300]
+       ldr     r1, =0x11110111                 @ UART[3210]: MMC[3210]
+       str     r1, [r0, #0x310]
+
+       /* Set Lock Time */
+       ldr     r1, =0x2cf                      @ Locktime : 30us
+       str     r1, [r0, #0x000]                @ S5PC110_APLL_LOCK
+       ldr     r1, =0xe10                      @ Locktime : 0xe10 = 3600
+       str     r1, [r0, #0x008]                @ S5PC110_MPLL_LOCK
+       str     r1, [r0, #0x010]                @ S5PC110_EPLL_LOCK
+       str     r1, [r0, #0x020]                @ S5PC110_VPLL_LOCK
+
+       /* S5PC110_APLL_CON */
+       ldr     r1, =0x80C80601                 @ 800MHz
+       str     r1, [r0, #0x100]
+       /* S5PC110_MPLL_CON */
+       ldr     r1, =0x829B0C01                 @ 667MHz
+       str     r1, [r0, #0x108]
+       /* S5PC110_EPLL_CON */
+       ldr     r1, =0x80600602                 @  96MHz VSEL 0 P 6 M 96 S 2
+       str     r1, [r0, #0x110]
+       /* S5PC110_VPLL_CON */
+       ldr     r1, =0x806C0603                 @  54MHz
+       str     r1, [r0, #0x120]
+
+       /* Set Source Clock */
+       ldr     r1, =0x10001111                 @ A, M, E, VPLL Muxing
+       str     r1, [r0, #0x200]                @ S5PC1XX_CLK_SRC0
+
+       /* OneDRAM(DMC0) clock setting */
+       ldr     r1, =0x01000000                 @ ONEDRAM_SEL[25:24] 1 SCLKMPLL
+       str     r1, [r0, #0x218]                @ S5PC110_CLK_SRC6
+       ldr     r1, =0x30000000                 @ ONEDRAM_RATIO[31:28] 3 + 1
+       str     r1, [r0, #0x318]                @ S5PC110_CLK_DIV6
+
+       /* XCLKOUT = XUSBXTI 24MHz */
+       add     r2, r0, #0xE000                 @ S5PC110_OTHERS
+       ldr     r1, [r2]
+       orr     r1, r1, #(0x3 << 8)             @ CLKOUT[9:8] 3 XUSBXTI
+       str     r1, [r2]
+
+       /* CLK_IP0 */
+       ldr     r1, =0x8fefeeb                  @ DMC[1:0] PDMA0[3] IMEM[5]
+       str     r1, [r0, #0x460]                @ S5PC110_CLK_IP0
+
+       /* CLK_IP1 */
+       ldr     r1, =0xe9fdf0f9                 @ FIMD[0] USBOTG[16]
+                                               @ NANDXL[24]
+       str     r1, [r0, #0x464]                @ S5PC110_CLK_IP1
+
+       /* CLK_IP2 */
+       ldr     r1, =0xf75f7fc                  @ CORESIGHT[8] MODEM[9]
+                                               @ HOSTIF[10] HSMMC0[16]
+                                               @ HSMMC2[18] VIC[27:24]
+       str     r1, [r0, #0x468]                @ S5PC110_CLK_IP2
+
+       /* CLK_IP3 */
+       ldr     r1, =0x8eff038c                 @ I2C[8:6]
+                                               @ SYSTIMER[16] UART0[17]
+                                               @ UART1[18] UART2[19]
+                                               @ UART3[20] WDT[22]
+                                               @ PWM[23] GPIO[26] SYSCON[27]
+       str     r1, [r0, #0x46c]                @ S5PC110_CLK_IP3
+
+       /* CLK_IP4 */
+       ldr     r1, =0xfffffff1                 @ CHIP_ID[0] TZPC[8:5]
+       str     r1, [r0, #0x470]                @ S5PC110_CLK_IP3
+
+200:
+       /* wait at least 200us to stablize all clock */
+       mov     r2, #0x10000
+1:     subs    r2, r2, #1
+       bne     1b
+
+       mov     pc, lr
+
+#ifndef CONFIG_ONENAND_IPL
+internal_ram_init:
+       ldreq   r0, =0xE3800000
+       ldrne   r0, =0xF1500000
+       ldr     r1, =0x0
+       str     r1, [r0]
+
+       mov     pc, lr
+#endif
+
+#ifndef CONFIG_ONENAND_IPL
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+       /* set GPIO to enable UART0-UART4 */
+       mov     r0, r8
+       ldr     r1, =0x22222222
+       str     r1, [r0, #0x0]                  @ S5PC100_GPIO_A0_OFFSET
+       ldr     r1, =0x00002222
+       str     r1, [r0, #0x20]                 @ S5PC100_GPIO_A1_OFFSET
+
+       /* Check S5PC100 */
+       cmp     r7, r8
+       bne     110f
+
+       /* UART_SEL GPK0[5] at S5PC100 */
+       add     r0, r8, #0x2A0                  @ S5PC100_GPIO_K0_OFFSET
+       ldr     r1, [r0, #0x0]                  @ S5PC1XX_GPIO_CON_OFFSET
+       bic     r1, r1, #(0xf << 20)            @ 20 = 5 * 4-bit
+       orr     r1, r1, #(0x1 << 20)            @ Output
+       str     r1, [r0, #0x0]                  @ S5PC1XX_GPIO_CON_OFFSET
+
+       ldr     r1, [r0, #0x8]                  @ S5PC1XX_GPIO_PULL_OFFSET
+       bic     r1, r1, #(0x3 << 10)            @ 10 = 5 * 2-bit
+       orr     r1, r1, #(0x2 << 10)            @ Pull-up enabled
+       str     r1, [r0, #0x8]                  @ S5PC1XX_GPIO_PULL_OFFSET
+
+       ldr     r1, [r0, #0x4]                  @ S5PC1XX_GPIO_DAT_OFFSET
+       orr     r1, r1, #(1 << 5)               @ 5 = 5 * 1-bit
+       str     r1, [r0, #0x4]                  @ S5PC1XX_GPIO_DAT_OFFSET
+
+       b       200f
+110:
+       /*
+        * Note that the following address
+        * 0xE020'0360 is reserved address at S5PC100
+        */
+       /* UART_SEL MP0_5[7] at S5PC110 */
+       add     r0, r8, #0x360                  @ S5PC110_GPIO_MP0_5_OFFSET
+       ldr     r1, [r0, #0x0]                  @ S5PC1XX_GPIO_CON_OFFSET
+       bic     r1, r1, #(0xf << 28)            @ 28 = 7 * 4-bit
+       orr     r1, r1, #(0x1 << 28)            @ Output
+       str     r1, [r0, #0x0]                  @ S5PC1XX_GPIO_CON_OFFSET
+
+       ldr     r1, [r0, #0x8]                  @ S5PC1XX_GPIO_PULL_OFFSET
+       bic     r1, r1, #(0x3 << 14)            @ 14 = 7 * 2-bit
+       orr     r1, r1, #(0x2 << 14)            @ Pull-up enabled
+       str     r1, [r0, #0x8]                  @ S5PC1XX_GPIO_PULL_OFFSET
+
+       ldr     r1, [r0, #0x4]                  @ S5PC1XX_GPIO_DAT_OFFSET
+       orr     r1, r1, #(1 << 7)               @ 7 = 7 * 1-bit
+       str     r1, [r0, #0x4]                  @ S5PC1XX_GPIO_DAT_OFFSET
+200:
+       mov     pc, lr
+#endif
diff --git a/board/samsung/goni/mem_setup.S b/board/samsung/goni/mem_setup.S
new file mode 100644 (file)
index 0000000..c4d2845
--- /dev/null
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2009 Samsung Electrnoics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+       .globl mem_ctrl_asm_init
+mem_ctrl_asm_init:
+       cmp     r7, r8
+
+       ldreq   r0, =S5PC100_DMC_BASE                   @ 0xE6000000
+       ldrne   r0, =S5PC110_DMC0_BASE                  @ 0xF0000000
+       ldrne   r6, =S5PC110_DMC1_BASE                  @ 0xF1400000
+
+       /* DLL parameter setting */
+       ldr     r1, =0x50101000
+       str     r1, [r0, #0x018]                        @ PHYCONTROL0_OFFSET
+       strne   r1, [r6, #0x018]                        @ PHYCONTROL0_OFFSET
+       ldr     r1, =0x000000f4
+       str     r1, [r0, #0x01C]                        @ PHYCONTROL1_OFFSET
+       strne   r1, [r6, #0x01C]                        @ PHYCONTROL1_OFFSET
+       ldreq   r1, =0x0
+       streq   r1, [r0, #0x020]                        @ PHYCONTROL2_OFFSET
+
+       /* DLL on */
+       ldr     r1, =0x50101002
+       str     r1, [r0, #0x018]                        @ PHYCONTROL0_OFFSET
+       strne   r1, [r6, #0x018]                        @ PHYCONTROL0_OFFSET
+
+       /* DLL start */
+       ldr     r1, =0x50101003
+       str     r1, [r0, #0x018]                        @ PHYCONTROL0_OFFSET
+       strne   r1, [r6, #0x018]                        @ PHYCONTROL0_OFFSET
+
+       mov     r2, #0x4000
+wait:  subs    r2, r2, #0x1
+       cmp     r2, #0x0
+       bne     wait
+
+       cmp     r7, r8
+       /* Force value locking for DLL off */
+       str     r1, [r0, #0x018]                        @ PHYCONTROL0_OFFSET
+       strne   r1, [r6, #0x018]                        @ PHYCONTROL0_OFFSET
+
+       /* DLL off */
+       ldr     r1, =0x50101009
+       str     r1, [r0, #0x018]                        @ PHYCONTROL0_OFFSET
+       strne   r1, [r6, #0x018]                        @ PHYCONTROL0_OFFSET
+
+       /* auto refresh off */
+       ldr     r1, =0xff001010 | (1 << 7)
+       ldr     r2, =0xff001010 | (1 << 7)
+       str     r1, [r0, #0x000]                        @ CONCONTROL_OFFSET
+       strne   r2, [r6, #0x000]                        @ CONCONTROL_OFFSET
+
+       /*
+        * Burst Length 4, 2 chips, 32-bit, LPDDR
+        * OFF: dynamic self refresh, force precharge, dynamic power down off
+        */
+       ldr     r1, =0x00212100
+       ldr     r2, =0x00212100
+       str     r1, [r0, #0x004]                        @ MEMCONTROL_OFFSET
+       strne   r2, [r6, #0x004]                        @ MEMCONTROL_OFFSET
+
+       /*
+        * Note:
+        * If Bank0 has Mobile RAM we place it at 0x3800'0000 (s5pc100 only)
+        * So finally Bank1 OneDRAM should address start at at 0x3000'0000
+        */
+
+       /*
+        * DMC0: CS0 : S5PC100/S5PC110
+        * 0x30 -> 0x30000000
+        * 0xf8 -> 0x37FFFFFF
+        * [15:12] 0: Linear
+        * [11:8 ] 2: 9 bits
+        * [ 7:4 ] 2: 14 bits
+        * [ 3:0 ] 2: 4 banks
+        */
+       ldr     r3, =0x30f80222
+       ldr     r4, =0x40f00222
+swap_memory:
+       str     r3, [r0, #0x008]                        @ MEMCONFIG0_OFFSET
+       str     r4, [r0, #0x00C]                        @ dummy write
+
+       /*
+        * DMC1: CS0 : S5PC110
+        * 0x40 -> 0x40000000
+        * 0xf8 -> 0x47FFFFFF (1Gib)
+        * 0x40 -> 0x40000000
+        * 0xf0 -> 0x4FFFFFFF (2Gib)
+        * [15:12] 0: Linear
+        * [11:8 ] 2: 9 bits  - Col (1Gib)
+        * [11:8 ] 3: 10 bits - Col (2Gib)
+        * [ 7:4 ] 2: 14 bits - Row
+        * [ 3:0 ] 2: 4 banks
+        */
+       /* Default : 2GiB */
+       ldr     r4, =0x40f01322                         @ 2Gib: MCP B
+       ldr     r5, =0x50f81312                         @ dummy: MCP D
+       cmp     r9, #1
+       ldreq   r4, =0x40f81222                         @ 1Gib: MCP A
+       cmp     r9, #3
+       ldreq   r5, =0x50f81312                         @ 2Gib + 1Gib: MCP D
+       cmp     r9, #4
+       ldreq   r5, =0x50f01312                         @ 2Gib + 2Gib: MCP E
+
+       cmp     r7, r8
+       strne   r4, [r6, #0x008]                        @ MEMCONFIG0_OFFSET
+       strne   r5, [r6, #0x00C]                        @ MEMCONFIG1_OFFSET
+
+       /*
+        * DMC0: CS1: S5PC100
+        * 0x38 -> 0x38000000
+        * 0xf8 -> 0x3fFFFFFF
+        * [15:12] 0: Linear
+        * [11:8 ] 2: 9 bits
+        * [ 7:4 ] 2: 14 bits
+        * [ 3:0 ] 2: 4 banks
+        */
+       eoreq   r3, r3, #0x08000000
+       streq   r3, [r0, #0xc]                          @ MEMCONFIG1_OFFSET
+
+       ldr     r1, =0x20000000
+       str     r1, [r0, #0x014]                        @ PRECHCONFIG_OFFSET
+       strne   r1, [r0, #0x014]                        @ PRECHCONFIG_OFFSET
+       strne   r1, [r6, #0x014]                        @ PRECHCONFIG_OFFSET
+
+       /*
+        * S5PC100:
+        * DMC:  CS0: 166MHz
+        *       CS1: 166MHz
+        * S5PC110:
+        * DMC0: CS0: 166MHz
+        * DMC1: CS0: 200MHz
+        *
+        * 7.8us * 200MHz %LE %LONG1560(0x618)
+        * 7.8us * 166MHz %LE %LONG1294(0x50E)
+        * 7.8us * 133MHz %LE %LONG1038(0x40E),
+        * 7.8us * 100MHz %LE %LONG780(0x30C),
+        */
+       ldr     r1, =0x0000050E
+       str     r1, [r0, #0x030]                        @ TIMINGAREF_OFFSET
+       ldrne   r1, =0x00000618
+       strne   r1, [r6, #0x030]                        @ TIMINGAREF_OFFSET
+
+       ldr     r1, =0x14233287
+       str     r1, [r0, #0x034]                        @ TIMINGROW_OFFSET
+       ldrne   r1, =0x182332c8
+       strne   r1, [r6, #0x034]                        @ TIMINGROW_OFFSET
+
+       ldr     r1, =0x12130005
+       str     r1, [r0, #0x038]                        @ TIMINGDATA_OFFSET
+       ldrne   r1, =0x13130005
+       strne   r1, [r6, #0x038]                        @ TIMINGDATA_OFFSET
+
+       ldr     r1, =0x0E140222
+       str     r1, [r0, #0x03C]                        @ TIMINGPOWER_OFFSET
+       ldrne   r1, =0x0E180222
+       strne   r1, [r6, #0x03C]                        @ TIMINGPOWER_OFFSET
+
+       /* chip0 Deselect */
+       ldr     r1, =0x07000000
+       str     r1, [r0, #0x010]                        @ DIRECTCMD_OFFSET
+       strne   r1, [r6, #0x010]                        @ DIRECTCMD_OFFSET
+
+       /* chip0 PALL */
+       ldr     r1, =0x01000000
+       str     r1, [r0, #0x010]                        @ DIRECTCMD_OFFSET
+       strne   r1, [r6, #0x010]                        @ DIRECTCMD_OFFSET
+
+       /* chip0 REFA */
+       ldr     r1, =0x05000000
+       str     r1, [r0, #0x010]                        @ DIRECTCMD_OFFSET
+       strne   r1, [r6, #0x010]                        @ DIRECTCMD_OFFSET
+       /* chip0 REFA */
+       str     r1, [r0, #0x010]                        @ DIRECTCMD_OFFSET
+       strne   r1, [r6, #0x010]                        @ DIRECTCMD_OFFSET
+
+       /* chip0 MRS */
+       ldr     r1, =0x00000032
+       str     r1, [r0, #0x010]                        @ DIRECTCMD_OFFSET
+       strne   r1, [r6, #0x010]                        @ DIRECTCMD_OFFSET
+
+       /* chip0 EMRS */
+       ldr     r1, =0x00020020
+       str     r1, [r0, #0x010]                        @ DIRECTCMD_OFFSET
+       strne   r1, [r6, #0x010]                        @ DIRECTCMD_OFFSET
+
+       /* chip1 Deselect */
+       ldr     r1, =0x07100000
+       str     r1, [r0, #0x010]                        @ DIRECTCMD_OFFSET
+       strne   r1, [r6, #0x010]                        @ DIRECTCMD_OFFSET
+
+       /* chip1 PALL */
+       ldr     r1, =0x01100000
+       str     r1, [r0, #0x010]                        @ DIRECTCMD_OFFSET
+       strne   r1, [r6, #0x010]                        @ DIRECTCMD_OFFSET
+
+       /* chip1 REFA */
+       ldr     r1, =0x05100000
+       str     r1, [r0, #0x010]                        @ DIRECTCMD_OFFSET
+       strne   r1, [r6, #0x010]                        @ DIRECTCMD_OFFSET
+       /* chip1 REFA */
+       str     r1, [r0, #0x010]                        @ DIRECTCMD_OFFSET
+       strne   r1, [r6, #0x010]                        @ DIRECTCMD_OFFSET
+
+       /* chip1 MRS */
+       ldr     r1, =0x00100032
+       str     r1, [r0, #0x010]                        @ DIRECTCMD_OFFSET
+       strne   r1, [r6, #0x010]                        @ DIRECTCMD_OFFSET
+
+       /* chip1 EMRS */
+       ldr     r1, =0x00120020
+       str     r1, [r0, #0x010]                        @ DIRECTCMD_OFFSET
+       strne   r1, [r6, #0x010]                        @ DIRECTCMD_OFFSET
+
+       /* auto refresh on */
+       ldr     r1, =0xFF002030 | (1 << 7)
+       str     r1, [r0, #0x000]                        @ CONCONTROL_OFFSET
+       strne   r1, [r6, #0x000]                        @ CONCONTROL_OFFSET
+
+       /* PwrdnConfig */
+       ldr     r1, =0x00100002
+       str     r1, [r0, #0x028]                        @ PWRDNCONFIG_OFFSET
+       strne   r1, [r6, #0x028]                        @ PWRDNCONFIG_OFFSET
+
+       ldr     r1, =0x00212113
+       str     r1, [r0, #0x004]                        @ MEMCONTROL_OFFSET
+       strne   r1, [r6, #0x004]                        @ MEMCONTROL_OFFSET
+
+       /* Skip when S5PC110 */
+       bne     1f
+
+       /* Check OneDRAM access area at s5pc100 */
+       ldreq   r3, =0x38f80222
+       ldreq   r1, =0x37ffff00
+       str     r3, [r1]
+       ldr     r2, [r1]
+       cmp     r2, r3
+       beq     swap_memory
+1:
+       mov     pc, lr
+
+       .ltorg
diff --git a/board/samsung/goni/onenand.c b/board/samsung/goni/onenand.c
new file mode 100644 (file)
index 0000000..8d3769b
--- /dev/null
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2008-2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/samsung_onenand.h>
+#include <onenand_uboot.h>
+
+void onenand_board_init(struct mtd_info *mtd)
+{
+       struct onenand_chip *this = mtd->priv;
+
+       this->base = (void *)CONFIG_SYS_ONENAND_BASE;
+       this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK;
+}
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
new file mode 100644 (file)
index 0000000..171ec94
--- /dev/null
@@ -0,0 +1,217 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Configuation settings for the SAMSUNG Universal (s5pc100) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_ARMCORTEXA8     1       /* This is an ARM V7 CPU core */
+#define CONFIG_SAMSUNG         1       /* in a SAMSUNG core */
+#define CONFIG_S5PC1XX         1       /* which is in a S5PC1XX Family */
+#define CONFIG_S5PC110         1       /* which is in a S5PC110 */
+#define CONFIG_MACH_GONI       1       /* working with Goni */
+
+#include <asm/arch/cpu.h>              /* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+
+/* input clock of PLL: has 24MHz input clock at S5PC110 */
+#define CONFIG_SYS_CLK_FREQ_C110       24000000
+
+/* DRAM Base */
+#define CONFIG_SYS_SDRAM_BASE          0x30000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/*
+ * Size of malloc() pool
+ * 1MB = 0x100000, 0x100000 = 1024 * 1024
+ */
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (1 << 20))
+#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes for */
+                                               /* initial data */
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL2                 1       /* use SERIAL2 */
+#define CONFIG_SERIAL_MULTI            1
+#define CONFIG_BAUDRATE                        115200
+
+/* It should define before config_cmd_default.h */
+#define CONFIG_SYS_NO_FLASH            1
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_XIMG
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_ONENAND
+#define CONFIG_CMD_MTDPARTS
+
+#define CONFIG_BOOTDELAY               1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
+#define MTDIDS_DEFAULT         "onenand0=samsung-onenand"
+#define MTDPARTS_DEFAULT       "mtdparts=samsung-onenand:1m(bootloader)"\
+                               ",256k(params)"\
+                               ",2816k(config)"\
+                               ",8m(csa)"\
+                               ",7m(kernel)"\
+                               ",1m(log)"\
+                               ",12m(modem)"\
+                               ",60m(qboot)"\
+                               ",-(UBI)\0"
+
+#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+
+#define CONFIG_BOOTCOMMAND     "run ubifsboot"
+
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
+
+#define CONFIG_RAMDISK_BOOT    "root=/dev/ram0 rw rootfstype=ext2" \
+               " ${console} ${meminfo}"
+
+#define CONFIG_COMMON_BOOT     "${console} ${meminfo} ${mtdparts}"
+
+#define CONFIG_BOOTARGS        "root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \
+               " rootfstype=cramfs " CONFIG_COMMON_BOOT
+
+#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \
+                       " onenand write 0x32008000 0x0 0x100000\0"
+
+#define CONFIG_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=3 ubi.mtd=6"
+
+#define CONFIG_UBIFS_OPTION    "rootflags=bulk_read,no_chk_data_crc"
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_EXTRA_ENV_SETTINGS                                      \
+       CONFIG_UPDATEB \
+       "updatek=" \
+               "onenand erase 0xc00000 0x600000;" \
+               "onenand write 0x31008000 0xc00000 0x600000\0" \
+       "updateu=" \
+               "onenand erase 0x01560000 0x1eaa0000;" \
+               "onenand write 0x32000000 0x1260000 0x8C0000\0" \
+       "bootk=" \
+               "onenand read 0x30007FC0 0xc00000 0x600000;" \
+               "bootm 0x30007FC0\0" \
+       "flashboot=" \
+               "set bootargs root=/dev/mtdblock${bootblock} " \
+               "rootfstype=${rootfstype}" CONFIG_UBI_MTD " ${opts} " \
+               "${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \
+       "ubifsboot=" \
+               "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
+               CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+               CONFIG_COMMON_BOOT "; run bootk\0" \
+       "tftpboot=" \
+               "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
+               CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+               CONFIG_COMMON_BOOT "; tftp 0x30007FC0 uImage; " \
+               "bootm 0x30007FC0\0" \
+       "ramboot=" \
+               "set bootargs " CONFIG_RAMDISK_BOOT \
+               " initrd=0x33000000,8M ramdisk=8192\0" \
+       "mmcboot=" \
+               "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \
+               CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+               CONFIG_COMMON_BOOT "; run bootk\0" \
+       "boottrace=setenv opts initcall_debug; run bootcmd\0" \
+       "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+       "verify=n\0" \
+       "rootfstype=cramfs\0" \
+       "console=" CONFIG_DEFAULT_CONSOLE \
+       "mtdparts=" MTDPARTS_DEFAULT \
+       "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
+       "mmcblk=/dev/mmcblk1p1\0" \
+       "bootblock=9\0" \
+       "ubiblock=8\0" \
+       "ubi=enabled\0" \
+       "opts=always_resume=1"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP            /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser    */
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+#define CONFIG_SYS_PROMPT      "Goni # "
+#define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE      384     /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + 0x5000000)
+#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x4000000)
+
+#define CONFIG_SYS_HZ                  1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE       (256 << 10)     /* 256 KiB */
+
+/* Goni has 3 banks of DRAM, but swap the bank */
+#define CONFIG_NR_DRAM_BANKS   3
+#define PHYS_SDRAM_1           CONFIG_SYS_SDRAM_BASE   /* OneDRAM Bank #0 */
+#define PHYS_SDRAM_1_SIZE      (80 << 20)              /* 80 MB in Bank #0 */
+#define PHYS_SDRAM_2           0x40000000              /* mDDR DMC1 Bank #1 */
+#define PHYS_SDRAM_2_SIZE      (256 << 20)             /* 256 MB in Bank #1 */
+#define PHYS_SDRAM_3           0x50000000              /* mDDR DMC2 Bank #2 */
+#define PHYS_SDRAM_3_SIZE      (128 << 20)             /* 128 MB in Bank #2 */
+
+#define CONFIG_SYS_MONITOR_BASE                0x00000000
+#define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* 256 KiB */
+
+/* FLASH and environment organization */
+#define CONFIG_ENV_IS_IN_ONENAND       1
+#define CONFIG_ENV_SIZE                        (256 << 10)     /* 256 KiB, 0x40000 */
+#define CONFIG_ENV_ADDR                        (1 << 20)       /* 1 MB, 0x100000 */
+
+#define CONFIG_USE_ONENAND_BOARD_INIT
+#define CONFIG_SAMSUNG_ONENAND         1
+#define CONFIG_SYS_ONENAND_BASE                0xB0000000
+
+#define CONFIG_DOS_PARTITION           1
+
+#endif /* __CONFIG_H */