pm9g45: init serial console before relocation

The early messages can be seen on the debug console.

Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>

diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index d29d0763acaaa2c374d82e53425c09ddce4733cf..b5a11f2303ceae8d28ce5e5be6ecaff967a2a744 100644 (file)
--- a/board/ronetix/pm9g45/pm9g45.c
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -127,22 +127,28 @@ static void pm9g45_macb_hw_init(void)
 }
 #endif
 
-int board_init(void)
+int board_early_init_f(void)
 {
        struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 
-       /* Enable Ctrlc */
-       console_init_f();
-
+       /* Enable clocks for all PIOs */
        writel((1 << ATMEL_ID_PIOA) |
                (1 << ATMEL_ID_PIOB) |
                (1 << ATMEL_ID_PIOC) |
                (1 << ATMEL_ID_PIODE), &pmc->pcer);
 
+       at91_seriald_hw_init();
+
+       return 0;
+}
+
+int board_init(void)
+{
+       /* arch number of AT91SAM9M10G45EK-Board */
+       gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
        /* adress of boot parameters */
        gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
-       at91_seriald_hw_init();
 #ifdef CONFIG_CMD_NAND
        pm9g45_nand_hw_init();
 #endif

diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 5b08d9109765047d9a67ea407a95a5516b715815..eec915330038e3b02f088f232a053dbdebc1875a 100644 (file)
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -57,6 +57,7 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers