mmc: add mmc hwpartition sub-command to do eMMC hardware partitioning

Adds the mmc hwpartition sub-command to perform eMMC hardware
partitioning on an mmc device. The number of arguments can be
large for a complex partitioning, but as the partitioning has
to be done in one go it is difficult to make it simpler.

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>

diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 18ed6600e6526be0065e2a127122bcdc030c955b..8397232d7107c08aa30582c37400345cb6e1e992 100644 (file)
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -480,6 +480,91 @@ static int do_mmc_list(cmd_tbl_t *cmdtp, int flag,
        print_mmc_devices('\n');
        return CMD_RET_SUCCESS;
 }
+
+static int do_mmc_hwpartition(cmd_tbl_t *cmdtp, int flag,
+                             int argc, char * const argv[])
+{
+       struct mmc *mmc;
+       struct mmc_hwpart_conf pconf = { };
+       enum mmc_hwpart_conf_mode mode = MMC_HWPART_CONF_CHECK;
+       int i, pidx;
+
+       mmc = init_mmc_device(curr_device, false);
+       if (!mmc)
+               return CMD_RET_FAILURE;
+
+       if (argc < 1)
+               return CMD_RET_USAGE;
+       i = 1;
+       while (i < argc) {
+               if (!strcmp(argv[i], "userenh")) {
+                       if (i + 2 >= argc)
+                               return CMD_RET_USAGE;
+                       memset(&pconf.user, 0, sizeof(pconf.user));
+                       pconf.user.enh_start =
+                               simple_strtoul(argv[i+1], NULL, 10);
+                       pconf.user.enh_size =
+                               simple_strtoul(argv[i+2], NULL, 10);
+                       i += 3;
+               } else if (!strncmp(argv[i], "gp", 2) &&
+                          strlen(argv[i]) == 3 &&
+                          argv[i][2] >= '1' && argv[i][2] <= '4') {
+                       if (i + 1 >= argc)
+                               return CMD_RET_USAGE;
+                       pidx = argv[i][2] - '1';
+                       memset(&pconf.gp_part[pidx], 0,
+                              sizeof(pconf.gp_part[pidx]));
+                       pconf.gp_part[pidx].size =
+                               simple_strtoul(argv[i+1], NULL, 10);
+                       i += 2;
+                       if (i < argc && !strcmp(argv[i], "enh")) {
+                               pconf.gp_part[pidx].enhanced = 1;
+                               i++;
+                       }
+               } else if (!strcmp(argv[i], "check")) {
+                       mode = MMC_HWPART_CONF_CHECK;
+                       i++;
+               } else if (!strcmp(argv[i], "set")) {
+                       mode = MMC_HWPART_CONF_SET;
+                       i++;
+               } else if (!strcmp(argv[i], "complete")) {
+                       mode = MMC_HWPART_CONF_COMPLETE;
+                       i++;
+               } else {
+                       return CMD_RET_USAGE;
+               }
+       }
+
+       puts("Partition configuration:\n");
+       if (pconf.user.enh_size) {
+               puts("\tUser Enhanced Start: ");
+               print_size(((u64)pconf.user.enh_start) << 9, "\n");
+               puts("\tUser Enhanced Size: ");
+               print_size(((u64)pconf.user.enh_size) << 9, "\n");
+       } else {
+               puts("\tNo enhanced user data area\n");
+       }
+       for (pidx = 0; pidx < 4; pidx++) {
+               if (pconf.gp_part[pidx].size) {
+                       printf("\tGP%i Capacity: ", pidx+1);
+                       print_size(((u64)pconf.gp_part[pidx].size) << 9,
+                                  pconf.gp_part[pidx].enhanced ?
+                                  " ENH\n" : "\n");
+               } else {
+                       printf("\tNo GP%i partition\n", pidx+1);
+               }
+       }
+
+       if (!mmc_hwpart_config(mmc, &pconf, mode)) {
+               if (mode == MMC_HWPART_CONF_COMPLETE)
+                       puts("Partitioning successful, "
+                            "power-cycle to make effective\n");
+               return CMD_RET_SUCCESS;
+       } else {
+               return CMD_RET_FAILURE;
+       }
+}
+
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 static int do_mmc_bootbus(cmd_tbl_t *cmdtp, int flag,
                          int argc, char * const argv[])
@@ -637,6 +722,7 @@ static cmd_tbl_t cmd_mmc[] = {
        U_BOOT_CMD_MKENT(part, 1, 1, do_mmc_part, "", ""),
        U_BOOT_CMD_MKENT(dev, 3, 0, do_mmc_dev, "", ""),
        U_BOOT_CMD_MKENT(list, 1, 1, do_mmc_list, "", ""),
+       U_BOOT_CMD_MKENT(hwpartition, 17, 0, do_mmc_hwpartition, "", ""),
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
        U_BOOT_CMD_MKENT(bootbus, 5, 0, do_mmc_bootbus, "", ""),
        U_BOOT_CMD_MKENT(bootpart-resize, 4, 0, do_mmc_boot_resize, "", ""),
@@ -676,7 +762,7 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 }
 
 U_BOOT_CMD(
-       mmc, 7, 1, do_mmcops,
+       mmc, 18, 1, do_mmcops,
        "MMC sub system",
        "info - display info of the current MMC device\n"
        "mmc read addr blk# cnt\n"
@@ -686,6 +772,11 @@ U_BOOT_CMD(
        "mmc part - lists available partition on current mmc device\n"
        "mmc dev [dev] [part] - show or set current mmc device [partition]\n"
        "mmc list - lists available devices\n"
+       "mmc hwpartition [args...] - does hardware partitioning\n"
+       "  arguments (sizes in 512-byte blocks):\n"
+       "    [userenh start cnt] - sets enhanced user data area\n"
+       "    [gp1|gp2|gp3|gp4 cnt [enh]] - general purpose partition\n"
+       "    [check|set|complete] - mode, complete set partitioning completed\n"
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
        "mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode\n"
        " - Set the BOOT_BUS_WIDTH field of the specified device\n"