#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <nand.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <asm/gpio.h>
#include "qong_fpga.h"
#include <watchdog.h>
+#include <errno.h>
DECLARE_GLOBAL_DATA_PTR;
{
u32 val;
struct pmic *p;
+ int ret;
- pmic_init();
- p = get_pmic();
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return ret;
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return -ENODEV;
/* Enable RTC battery */
pmic_reg_read(p, REG_POWER_CTL0, &val);
pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <watchdog.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
+#include <errno.h>
DECLARE_GLOBAL_DATA_PTR;
{
u32 val;
struct pmic *p;
+ int ret;
- pmic_init();
- p = get_pmic();
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return ret;
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return -ENODEV;
/* Enable RTC battery */
pmic_reg_read(p, REG_POWER_CTL0, &val);
pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
#include <asm/arch/mx35_pins.h>
#include <asm/arch/iomux.h>
#include <i2c.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <mmc.h>
#include <fsl_esdhc.h>
static inline int pmic_detect(void)
{
unsigned int id;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("FSL_PMIC");
+ if (!p)
+ return -ENODEV;
pmic_reg_read(p, REG_IDENTIFICATION, &id);
u8 val;
u32 pmic_val;
struct pmic *p;
+ int ret;
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return ret;
- pmic_init();
if (pmic_detect()) {
- p = get_pmic();
+ p = pmic_get("FSL_PMIC");
mxc_request_iomux(MX35_PIN_WATCHDOG_RST, MUX_CONFIG_SION |
MUX_CONFIG_ALT1);
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <mc13892.h>
#include <usb/ehci-fsl.h>
unsigned int val;
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
struct pmic *p;
+ int ret;
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return;
- pmic_init();
- p = get_pmic();
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return;
/* Write needed to Power Gate 2 register */
pmic_reg_read(p, REG_POWER_MISC, &val);
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <asm/gpio.h>
#include <mc13892.h>
{
unsigned int val;
struct pmic *p;
+ int ret;
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return;
- pmic_init();
- p = get_pmic();
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return;
/* Set VDDA to 1.25V */
pmic_reg_read(p, REG_SW_2, &val);
#include <mmc.h>
#include <fsl_esdhc.h>
#include <asm/gpio.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <dialog_pmic.h>
#include <fsl_pmic.h>
#include <linux/fb.h>
unsigned int val;
int ret = -1;
struct pmic *p;
+ int retval;
if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) {
- pmic_dialog_init();
- p = get_pmic();
+ retval = pmic_dialog_init(I2C_PMIC);
+ if (retval)
+ return retval;
+
+ p = pmic_get("DIALOG_PMIC");
+ if (!p)
+ return -ENODEV;
/* Set VDDA to 1.25V */
val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
}
if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) {
- pmic_init();
- p = get_pmic();
+ retval = pmic_init(I2C_PMIC);
+ if (retval)
+ return retval;
+
+ p = pmic_get("DIALOG_PMIC");
+ if (!p)
+ return -ENODEV;
/* Set VDDGP to 1.25V for 1GHz on SW1 */
pmic_reg_read(p, REG_SW_0, &val);
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <mc13892.h>
unsigned int val;
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
struct pmic *p;
+ int ret;
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return;
- pmic_init();
- p = get_pmic();
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return;
/* Write needed to Power Gate 2 register */
pmic_reg_read(p, REG_POWER_MISC, &val);
#include <common.h>
#include <netdev.h>
#include <command.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <mc13783.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
+#include <errno.h>
DECLARE_GLOBAL_DATA_PTR;
{
u32 val;
struct pmic *p;
+ int ret;
/*
* this is the first driver to use the pmic, so call
* pmic_init() here. board_late_init() is too late for
* the MMC driver.
*/
- pmic_init();
- p = get_pmic();
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return ret;
+
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return -ENODEV;
/* configure pins for SDHC1 only */
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CLK, MUX_CTL_FUNC));
#include <common.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <usb/s3c_udc.h>
#include <asm/arch/cpu.h>
-#include <max8998_pmic.h>
+#include <power/max8998_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
static struct s5pc110_gpio *s5pc110_gpio;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
#if defined(CONFIG_PMIC)
- pmic_init();
+ pmic_init(I2C_5);
#endif
+
return 0;
}
{
int ret;
static int status;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("MAX8998_PMIC");
+ if (!p)
+ return -ENODEV;
if (pmic_probe(p))
return -1;
#include <asm/arch/mipi_dsim.h>
#include <asm/arch/watchdog.h>
#include <asm/arch/power.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <usb/s3c_udc.h>
-#include <max8997_pmic.h>
+#include <power/max8997_pmic.h>
#include <libtizen.h>
#include "setup.h"
printf("HW Revision:\t0x%x\n", board_rev);
#if defined(CONFIG_PMIC)
- pmic_init();
+ pmic_init(I2C_5);
#endif
return 0;
{
int ret = 0;
u32 val = 0;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("MAX8997_PMIC");
+ if (!p)
+ return -ENODEV;
if (pmic_probe(p))
return -1;
static int lcd_power(void)
{
int ret = 0;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("MAX8997_PMIC");
+ if (!p)
+ return -ENODEV;
if (pmic_probe(p))
return 0;
static int mipi_power(void)
{
int ret = 0;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("MAX8997_PMIC");
+ if (!p)
+ return -ENODEV;
if (pmic_probe(p))
return 0;
#include <asm/arch/adc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <usb/s3c_udc.h>
#include <asm/arch/cpu.h>
-#include <max8998_pmic.h>
+#include <power/max8998_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
#if defined(CONFIG_PMIC)
- pmic_init();
+ pmic_init(I2C_5);
#endif
check_hw_revision();
static int adc_power_control(int on)
{
int ret;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("MAX8998_PMIC");
+ if (!p)
+ return -ENODEV;
if (pmic_probe(p))
return -1;
static int s5pc210_phy_control(int on)
{
int ret = 0;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("MAX8998_PMIC");
+ if (!p)
+ return -ENODEV;
if (pmic_probe(p))
return -1;
#include <asm/arch/sys_proto.h>
#include <i2c.h>
#include <mmc.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_esdhc.h>
#include <fsl_pmic.h>
#include <mc13892.h>
{
unsigned int val;
struct pmic *p;
+ int ret;
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return;
- pmic_init();
- p = get_pmic();
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return;
/* Write needed to Power Gate 2 register */
pmic_reg_read(p, REG_POWER_MISC, &val);
*/
#include <common.h>
+#include <malloc.h>
#include <linux/types.h>
-#include <pmic.h>
+#include <linux/list.h>
+#include <power/pmic.h>
-static struct pmic pmic;
+static LIST_HEAD(pmic_list);
-int check_reg(u32 reg)
+int check_reg(struct pmic *p, u32 reg)
{
- if (reg >= pmic.number_of_regs) {
+ if (reg >= p->number_of_regs) {
printf("<reg num> = %d is invalid. Should be less than %d\n",
- reg, pmic.number_of_regs);
+ reg, p->number_of_regs);
return -1;
}
+
return 0;
}
printf("PMIC: %s\n", p->name);
}
-static void pmic_dump(struct pmic *p)
+static int pmic_dump(struct pmic *p)
{
int i, ret;
u32 val;
+ if (!p) {
+ puts("Wrong PMIC name!\n");
+ return -1;
+ }
+
pmic_show_info(p);
for (i = 0; i < p->number_of_regs; i++) {
ret = pmic_reg_read(p, i, &val);
printf("%08x ", val);
}
puts("\n");
+ return 0;
}
-struct pmic *get_pmic(void)
+struct pmic *pmic_alloc(void)
{
- return &pmic;
+ struct pmic *p;
+
+ p = calloc(sizeof(*p), 1);
+ if (!p) {
+ printf("%s: No available memory for allocation!\n", __func__);
+ return NULL;
+ }
+
+ list_add_tail(&p->list, &pmic_list);
+
+ debug("%s: new pmic struct: 0x%p\n", __func__, p);
+
+ return p;
+}
+
+struct pmic *pmic_get(const char *s)
+{
+ struct pmic *p;
+
+ list_for_each_entry(p, &pmic_list, list) {
+ if (strcmp(p->name, s) == 0) {
+ debug("%s: pmic %s -> 0x%p\n", __func__, p->name, p);
+ return p;
+ }
+ }
+
+ return NULL;
+}
+
+static void pmic_list_names(void)
+{
+ struct pmic *p;
+
+ puts("PMIC devices:\n");
+ list_for_each_entry(p, &pmic_list, list) {
+ printf("name: %s\n", p->name);
+ }
}
int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u32 ret, reg, val;
+ struct pmic *p;
char *cmd;
- struct pmic *p = &pmic;
-
/* at least two arguments please */
if (argc < 2)
- return cmd_usage(cmdtp);
+ return CMD_RET_USAGE;
cmd = argv[1];
+
+ if (strcmp(cmd, "list") == 0) {
+ pmic_list_names();
+ return CMD_RET_SUCCESS;
+ }
+
if (strcmp(cmd, "dump") == 0) {
- pmic_dump(p);
- return 0;
+ p = pmic_get(argv[2]);
+ if (!p)
+ return CMD_RET_FAILURE;
+ if (pmic_dump(p))
+ return CMD_RET_FAILURE;
+ return CMD_RET_SUCCESS;
}
if (strcmp(cmd, "read") == 0) {
- if (argc < 3)
- return cmd_usage(cmdtp);
+ if (argc < 4)
+ return CMD_RET_USAGE;
- reg = simple_strtoul(argv[2], NULL, 16);
+ reg = simple_strtoul(argv[3], NULL, 16);
+ p = pmic_get(argv[2]);
+ if (!p)
+ return CMD_RET_FAILURE;
ret = pmic_reg_read(p, reg, &val);
printf("\n0x%02x: 0x%08x\n", reg, val);
- return 0;
+ return CMD_RET_SUCCESS;
}
if (strcmp(cmd, "write") == 0) {
- if (argc < 4)
- return cmd_usage(cmdtp);
-
- reg = simple_strtoul(argv[2], NULL, 16);
- val = simple_strtoul(argv[3], NULL, 16);
-
+ if (argc < 5)
+ return CMD_RET_USAGE;
+
+ reg = simple_strtoul(argv[3], NULL, 16);
+ val = simple_strtoul(argv[4], NULL, 16);
+ p = pmic_get(argv[2]);
+ if (!p)
+ return CMD_RET_FAILURE;
pmic_reg_write(p, reg, val);
- return 0;
+ return CMD_RET_SUCCESS;
}
/* No subcommand found */
- return 1;
+ return CMD_RET_SUCCESS;
}
U_BOOT_CMD(
pmic, CONFIG_SYS_MAXARGS, 1, do_pmic,
"PMIC",
- "dump - dump PMIC registers\n"
- "pmic read <reg> - read register\n"
- "pmic write <reg> <value> - write register"
+ "list - list available PMICs\n"
+ "pmic dump name - dump named PMIC registers\n"
+ "pmic name read <reg> - read register\n"
+ "pmic name write <reg> <value> - write register"
);
*/
#include <common.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <dialog_pmic.h>
+#include <errno.h>
-int pmic_dialog_init(void)
+int pmic_dialog_init(unsigned char bus)
{
- struct pmic *p = get_pmic();
static const char name[] = "DIALOG_PMIC";
+ struct pmic *p = pmic_alloc();
+
+ if (!p) {
+ printf("%s: POWER allocation error!\n", __func__);
+ return -ENOMEM;
+ }
p->name = name;
p->number_of_regs = DIALOG_NUM_OF_REGS;
p->interface = PMIC_I2C;
p->hw.i2c.addr = CONFIG_SYS_DIALOG_PMIC_I2C_ADDR;
p->hw.i2c.tx_num = 1;
- p->bus = I2C_PMIC;
+ p->bus = bus;
return 0;
}
#include <common.h>
#include <spi.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
+#include <errno.h>
#if defined(CONFIG_PMIC_SPI)
static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write)
}
#endif
-int pmic_init(void)
+int pmic_init(unsigned char bus)
{
- struct pmic *p = get_pmic();
static const char name[] = "FSL_PMIC";
+ struct pmic *p = pmic_alloc();
+
+ if (!p) {
+ printf("%s: POWER allocation error!\n", __func__);
+ return -ENOMEM;
+ }
p->name = name;
p->number_of_regs = PMIC_NUM_OF_REGS;
p->interface = PMIC_I2C;
p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
p->hw.i2c.tx_num = 3;
- p->bus = I2C_PMIC;
+ p->bus = bus;
#else
#error "You must select CONFIG_PMIC_SPI or CONFIG_PMIC_I2C"
#endif
#include <common.h>
#include <linux/types.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <i2c.h>
#include <compiler.h>
{
unsigned char buf[4] = { 0 };
- if (check_reg(reg))
+ if (check_reg(p, reg))
return -1;
switch (pmic_i2c_tx_num) {
unsigned char buf[4] = { 0 };
u32 ret_val = 0;
- if (check_reg(reg))
+ if (check_reg(p, reg))
return -1;
if (i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num))
*/
#include <common.h>
-#include <pmic.h>
-#include <max8997_pmic.h>
+#include <power/pmic.h>
+#include <power/max8997_pmic.h>
#include <i2c.h>
+#include <errno.h>
-int pmic_init(void)
+int pmic_init(unsigned char bus)
{
- struct pmic *p = get_pmic();
static const char name[] = "MAX8997_PMIC";
+ struct pmic *p = pmic_alloc();
+
+ if (!p) {
+ printf("%s: POWER allocation error!\n", __func__);
+ return -ENOMEM;
+ }
puts("Board PMIC init\n");
p->number_of_regs = PMIC_NUM_OF_REGS;
p->hw.i2c.addr = MAX8997_I2C_ADDR;
p->hw.i2c.tx_num = 1;
- p->bus = I2C_0;
+ p->bus = bus;
return 0;
}
*/
#include <common.h>
-#include <pmic.h>
-#include <max8998_pmic.h>
+#include <power/pmic.h>
+#include <power/max8998_pmic.h>
+#include <errno.h>
-int pmic_init(void)
+int pmic_init(unsigned char bus)
{
- struct pmic *p = get_pmic();
static const char name[] = "MAX8998_PMIC";
+ struct pmic *p = pmic_alloc();
+
+ if (!p) {
+ printf("%s: POWER allocation error!\n", __func__);
+ return -ENOMEM;
+ }
puts("Board PMIC init\n");
p->number_of_regs = PMIC_NUM_OF_REGS;
p->hw.i2c.addr = MAX8998_I2C_ADDR;
p->hw.i2c.tx_num = 1;
- p->bus = I2C_PMIC;
+ p->bus = bus;
return 0;
}
#include <common.h>
#include <linux/types.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <spi.h>
static struct spi_slave *slave;
return -1;
}
- if (check_reg(reg))
+ if (check_reg(p, reg))
return -1;
if (spi_claim_bus(slave))
#include <common.h>
#include <rtc.h>
#include <spi.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
int rtc_get(struct rtc_time *rtc)
{
u32 day1, day2, time;
int tim, i = 0;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("FSL_PMIC");
int ret;
+ if (!p)
+ return -1;
do {
ret = pmic_reg_read(p, REG_RTC_DAY, &day1);
if (ret < 0)
int rtc_set(struct rtc_time *rtc)
{
u32 time, day;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("FSL_PMIC");
+ if (!p)
+ return -1;
time = mktime(rtc->tm_year, rtc->tm_mon, rtc->tm_mday,
rtc->tm_hour, rtc->tm_min, rtc->tm_sec);
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics
- * Lukasz Majewski <l.majewski@samsung.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __MAX8997_PMIC_H_
-#define __MAX8997_PMIC_H_
-
-/* MAX 8997 registers */
-enum {
- MAX8997_REG_PMIC_ID0 = 0x00,
- MAX8997_REG_PMIC_ID1 = 0x01,
- MAX8997_REG_INTSRC = 0x02,
- MAX8997_REG_INT1 = 0x03,
- MAX8997_REG_INT2 = 0x04,
- MAX8997_REG_INT3 = 0x05,
- MAX8997_REG_INT4 = 0x06,
-
- MAX8997_REG_INT1MSK = 0x08,
- MAX8997_REG_INT2MSK = 0x09,
- MAX8997_REG_INT3MSK = 0x0a,
- MAX8997_REG_INT4MSK = 0x0b,
-
- MAX8997_REG_STATUS1 = 0x0d,
- MAX8997_REG_STATUS2 = 0x0e,
- MAX8997_REG_STATUS3 = 0x0f,
- MAX8997_REG_STATUS4 = 0x10,
-
- MAX8997_REG_MAINCON1 = 0x13,
- MAX8997_REG_MAINCON2 = 0x14,
- MAX8997_REG_BUCKRAMP = 0x15,
-
- MAX8997_REG_BUCK1CTRL = 0x18,
- MAX8997_REG_BUCK1DVS1 = 0x19,
- MAX8997_REG_BUCK1DVS2 = 0x1a,
- MAX8997_REG_BUCK1DVS3 = 0x1b,
- MAX8997_REG_BUCK1DVS4 = 0x1c,
- MAX8997_REG_BUCK1DVS5 = 0x1d,
- MAX8997_REG_BUCK1DVS6 = 0x1e,
- MAX8997_REG_BUCK1DVS7 = 0x1f,
- MAX8997_REG_BUCK1DVS8 = 0x20,
- MAX8997_REG_BUCK2CTRL = 0x21,
- MAX8997_REG_BUCK2DVS1 = 0x22,
- MAX8997_REG_BUCK2DVS2 = 0x23,
- MAX8997_REG_BUCK2DVS3 = 0x24,
- MAX8997_REG_BUCK2DVS4 = 0x25,
- MAX8997_REG_BUCK2DVS5 = 0x26,
- MAX8997_REG_BUCK2DVS6 = 0x27,
- MAX8997_REG_BUCK2DVS7 = 0x28,
- MAX8997_REG_BUCK2DVS8 = 0x29,
- MAX8997_REG_BUCK3CTRL = 0x2a,
- MAX8997_REG_BUCK3DVS = 0x2b,
- MAX8997_REG_BUCK4CTRL = 0x2c,
- MAX8997_REG_BUCK4DVS = 0x2d,
- MAX8997_REG_BUCK5CTRL = 0x2e,
- MAX8997_REG_BUCK5DVS1 = 0x2f,
- MAX8997_REG_BUCK5DVS2 = 0x30,
- MAX8997_REG_BUCK5DVS3 = 0x31,
- MAX8997_REG_BUCK5DVS4 = 0x32,
- MAX8997_REG_BUCK5DVS5 = 0x33,
- MAX8997_REG_BUCK5DVS6 = 0x34,
- MAX8997_REG_BUCK5DVS7 = 0x35,
- MAX8997_REG_BUCK5DVS8 = 0x36,
- MAX8997_REG_BUCK6CTRL = 0x37,
- MAX8997_REG_BUCK6BPSKIPCTRL = 0x38,
- MAX8997_REG_BUCK7CTRL = 0x39,
- MAX8997_REG_BUCK7DVS = 0x3a,
- MAX8997_REG_LDO1CTRL = 0x3b,
- MAX8997_REG_LDO2CTRL = 0x3c,
- MAX8997_REG_LDO3CTRL = 0x3d,
- MAX8997_REG_LDO4CTRL = 0x3e,
- MAX8997_REG_LDO5CTRL = 0x3f,
- MAX8997_REG_LDO6CTRL = 0x40,
- MAX8997_REG_LDO7CTRL = 0x41,
- MAX8997_REG_LDO8CTRL = 0x42,
- MAX8997_REG_LDO9CTRL = 0x43,
- MAX8997_REG_LDO10CTRL = 0x44,
- MAX8997_REG_LDO11CTRL = 0x45,
- MAX8997_REG_LDO12CTRL = 0x46,
- MAX8997_REG_LDO13CTRL = 0x47,
- MAX8997_REG_LDO14CTRL = 0x48,
- MAX8997_REG_LDO15CTRL = 0x49,
- MAX8997_REG_LDO16CTRL = 0x4a,
- MAX8997_REG_LDO17CTRL = 0x4b,
- MAX8997_REG_LDO18CTRL = 0x4c,
- MAX8997_REG_LDO21CTRL = 0x4d,
-
- MAX8997_REG_MBCCTRL1 = 0x50,
- MAX8997_REG_MBCCTRL2 = 0x51,
- MAX8997_REG_MBCCTRL3 = 0x52,
- MAX8997_REG_MBCCTRL4 = 0x53,
- MAX8997_REG_MBCCTRL5 = 0x54,
- MAX8997_REG_MBCCTRL6 = 0x55,
- MAX8997_REG_OTPCGHCVS = 0x56,
-
- MAX8997_REG_SAFEOUTCTRL = 0x5a,
-
- MAX8997_REG_LBCNFG1 = 0x5e,
- MAX8997_REG_LBCNFG2 = 0x5f,
- MAX8997_REG_BBCCTRL = 0x60,
-
- MAX8997_REG_FLASH1_CUR = 0x63, /* 0x63 ~ 0x6e for FLASH */
- MAX8997_REG_FLASH2_CUR = 0x64,
- MAX8997_REG_MOVIE_CUR = 0x65,
- MAX8997_REG_GSMB_CUR = 0x66,
- MAX8997_REG_BOOST_CNTL = 0x67,
- MAX8997_REG_LEN_CNTL = 0x68,
- MAX8997_REG_FLASH_CNTL = 0x69,
- MAX8997_REG_WDT_CNTL = 0x6a,
- MAX8997_REG_MAXFLASH1 = 0x6b,
- MAX8997_REG_MAXFLASH2 = 0x6c,
- MAX8997_REG_FLASHSTATUS = 0x6d,
- MAX8997_REG_FLASHSTATUSMASK = 0x6e,
-
- MAX8997_REG_GPIOCNTL1 = 0x70,
- MAX8997_REG_GPIOCNTL2 = 0x71,
- MAX8997_REG_GPIOCNTL3 = 0x72,
- MAX8997_REG_GPIOCNTL4 = 0x73,
- MAX8997_REG_GPIOCNTL5 = 0x74,
- MAX8997_REG_GPIOCNTL6 = 0x75,
- MAX8997_REG_GPIOCNTL7 = 0x76,
- MAX8997_REG_GPIOCNTL8 = 0x77,
- MAX8997_REG_GPIOCNTL9 = 0x78,
- MAX8997_REG_GPIOCNTL10 = 0x79,
- MAX8997_REG_GPIOCNTL11 = 0x7a,
- MAX8997_REG_GPIOCNTL12 = 0x7b,
-
- MAX8997_REG_LDO1CONFIG = 0x80,
- MAX8997_REG_LDO2CONFIG = 0x81,
- MAX8997_REG_LDO3CONFIG = 0x82,
- MAX8997_REG_LDO4CONFIG = 0x83,
- MAX8997_REG_LDO5CONFIG = 0x84,
- MAX8997_REG_LDO6CONFIG = 0x85,
- MAX8997_REG_LDO7CONFIG = 0x86,
- MAX8997_REG_LDO8CONFIG = 0x87,
- MAX8997_REG_LDO9CONFIG = 0x88,
- MAX8997_REG_LDO10CONFIG = 0x89,
- MAX8997_REG_LDO11CONFIG = 0x8a,
- MAX8997_REG_LDO12CONFIG = 0x8b,
- MAX8997_REG_LDO13CONFIG = 0x8c,
- MAX8997_REG_LDO14CONFIG = 0x8d,
- MAX8997_REG_LDO15CONFIG = 0x8e,
- MAX8997_REG_LDO16CONFIG = 0x8f,
- MAX8997_REG_LDO17CONFIG = 0x90,
- MAX8997_REG_LDO18CONFIG = 0x91,
- MAX8997_REG_LDO21CONFIG = 0x92,
-
- MAX8997_REG_DVSOKTIMER1 = 0x97,
- MAX8997_REG_DVSOKTIMER2 = 0x98,
- MAX8997_REG_DVSOKTIMER4 = 0x99,
- MAX8997_REG_DVSOKTIMER5 = 0x9a,
-
- PMIC_NUM_OF_REGS = 0x9b,
-};
-
-#define ENSAFEOUT1 (1 << 6)
-#define ENSAFEOUT2 (1 << 7)
-
-#define MAX8997_I2C_ADDR (0xCC >> 1)
-#define MAX8997_RTC_ADDR (0x0C >> 1)
-#define MAX8997_MUIC_ADDR (0x4A >> 1)
-#define MAX8997_FG_ADDR (0x6C >> 1)
-
-enum {
- LDO_OFF = 0,
- LDO_ON = 1,
-
- DIS_LDO = (0x00 << 6),
- EN_LDO = (0x3 << 6),
-};
-
-#endif /* __MAX8997_PMIC_H_ */
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics
- * Lukasz Majewski <l.majewski@samsung.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __MAX8998_PMIC_H_
-#define __MAX8998_PMIC_H_
-
-/* MAX 8998 registers */
-enum {
- MAX8998_REG_IRQ1,
- MAX8998_REG_IRQ2,
- MAX8998_REG_IRQ3,
- MAX8998_REG_IRQ4,
- MAX8998_REG_IRQM1,
- MAX8998_REG_IRQM2,
- MAX8998_REG_IRQM3,
- MAX8998_REG_IRQM4,
- MAX8998_REG_STATUS1,
- MAX8998_REG_STATUS2,
- MAX8998_REG_STATUSM1,
- MAX8998_REG_STATUSM2,
- MAX8998_REG_CHGR1,
- MAX8998_REG_CHGR2,
- MAX8998_REG_LDO_ACTIVE_DISCHARGE1,
- MAX8998_REG_LDO_ACTIVE_DISCHARGE2,
- MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
- MAX8998_REG_ONOFF1,
- MAX8998_REG_ONOFF2,
- MAX8998_REG_ONOFF3,
- MAX8998_REG_ONOFF4,
- MAX8998_REG_BUCK1_VOLTAGE1,
- MAX8998_REG_BUCK1_VOLTAGE2,
- MAX8998_REG_BUCK1_VOLTAGE3,
- MAX8998_REG_BUCK1_VOLTAGE4,
- MAX8998_REG_BUCK2_VOLTAGE1,
- MAX8998_REG_BUCK2_VOLTAGE2,
- MAX8998_REG_BUCK3,
- MAX8998_REG_BUCK4,
- MAX8998_REG_LDO2_LDO3,
- MAX8998_REG_LDO4,
- MAX8998_REG_LDO5,
- MAX8998_REG_LDO6,
- MAX8998_REG_LDO7,
- MAX8998_REG_LDO8_LDO9,
- MAX8998_REG_LDO10_LDO11,
- MAX8998_REG_LDO12,
- MAX8998_REG_LDO13,
- MAX8998_REG_LDO14,
- MAX8998_REG_LDO15,
- MAX8998_REG_LDO16,
- MAX8998_REG_LDO17,
- MAX8998_REG_BKCHR,
- MAX8998_REG_LBCNFG1,
- MAX8998_REG_LBCNFG2,
- PMIC_NUM_OF_REGS,
-};
-
-#define MAX8998_LDO3 (1 << 2)
-#define MAX8998_LDO4 (1 << 1)
-#define MAX8998_LDO8 (1 << 5)
-#define MAX8998_SAFEOUT1 (1 << 4)
-
-#define MAX8998_I2C_ADDR (0xCC >> 1)
-
-enum { LDO_OFF, LDO_ON };
-
-#endif /* __MAX8998_PMIC_H_ */
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics
- * Lukasz Majewski <l.majewski@samsung.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CORE_PMIC_H_
-#define __CORE_PMIC_H_
-
-enum { PMIC_I2C, PMIC_SPI, };
-enum { I2C_PMIC, I2C_NUM, };
-enum { PMIC_READ, PMIC_WRITE, };
-enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, };
-
-struct p_i2c {
- unsigned char addr;
- unsigned char *buf;
- unsigned char tx_num;
-};
-
-struct p_spi {
- unsigned int cs;
- unsigned int mode;
- unsigned int bitlen;
- unsigned int clk;
- unsigned int flags;
- u32 (*prepare_tx)(u32 reg, u32 *val, u32 write);
-};
-
-struct pmic {
- const char *name;
- unsigned char bus;
- unsigned char interface;
- unsigned char sensor_byte_order;
- unsigned char number_of_regs;
- union hw {
- struct p_i2c i2c;
- struct p_spi spi;
- } hw;
-};
-
-int pmic_init(void);
-int pmic_dialog_init(void);
-int check_reg(u32 reg);
-struct pmic *get_pmic(void);
-int pmic_probe(struct pmic *p);
-int pmic_reg_read(struct pmic *p, u32 reg, u32 *val);
-int pmic_reg_write(struct pmic *p, u32 reg, u32 val);
-int pmic_set_output(struct pmic *p, u32 reg, int ldo, int on);
-
-#define pmic_i2c_addr (p->hw.i2c.addr)
-#define pmic_i2c_tx_num (p->hw.i2c.tx_num)
-
-#define pmic_spi_bitlen (p->hw.spi.bitlen)
-#define pmic_spi_flags (p->hw.spi.flags)
-
-#endif /* __CORE_PMIC_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MAX8997_PMIC_H_
+#define __MAX8997_PMIC_H_
+
+/* MAX 8997 registers */
+enum {
+ MAX8997_REG_PMIC_ID0 = 0x00,
+ MAX8997_REG_PMIC_ID1 = 0x01,
+ MAX8997_REG_INTSRC = 0x02,
+ MAX8997_REG_INT1 = 0x03,
+ MAX8997_REG_INT2 = 0x04,
+ MAX8997_REG_INT3 = 0x05,
+ MAX8997_REG_INT4 = 0x06,
+
+ MAX8997_REG_INT1MSK = 0x08,
+ MAX8997_REG_INT2MSK = 0x09,
+ MAX8997_REG_INT3MSK = 0x0a,
+ MAX8997_REG_INT4MSK = 0x0b,
+
+ MAX8997_REG_STATUS1 = 0x0d,
+ MAX8997_REG_STATUS2 = 0x0e,
+ MAX8997_REG_STATUS3 = 0x0f,
+ MAX8997_REG_STATUS4 = 0x10,
+
+ MAX8997_REG_MAINCON1 = 0x13,
+ MAX8997_REG_MAINCON2 = 0x14,
+ MAX8997_REG_BUCKRAMP = 0x15,
+
+ MAX8997_REG_BUCK1CTRL = 0x18,
+ MAX8997_REG_BUCK1DVS1 = 0x19,
+ MAX8997_REG_BUCK1DVS2 = 0x1a,
+ MAX8997_REG_BUCK1DVS3 = 0x1b,
+ MAX8997_REG_BUCK1DVS4 = 0x1c,
+ MAX8997_REG_BUCK1DVS5 = 0x1d,
+ MAX8997_REG_BUCK1DVS6 = 0x1e,
+ MAX8997_REG_BUCK1DVS7 = 0x1f,
+ MAX8997_REG_BUCK1DVS8 = 0x20,
+ MAX8997_REG_BUCK2CTRL = 0x21,
+ MAX8997_REG_BUCK2DVS1 = 0x22,
+ MAX8997_REG_BUCK2DVS2 = 0x23,
+ MAX8997_REG_BUCK2DVS3 = 0x24,
+ MAX8997_REG_BUCK2DVS4 = 0x25,
+ MAX8997_REG_BUCK2DVS5 = 0x26,
+ MAX8997_REG_BUCK2DVS6 = 0x27,
+ MAX8997_REG_BUCK2DVS7 = 0x28,
+ MAX8997_REG_BUCK2DVS8 = 0x29,
+ MAX8997_REG_BUCK3CTRL = 0x2a,
+ MAX8997_REG_BUCK3DVS = 0x2b,
+ MAX8997_REG_BUCK4CTRL = 0x2c,
+ MAX8997_REG_BUCK4DVS = 0x2d,
+ MAX8997_REG_BUCK5CTRL = 0x2e,
+ MAX8997_REG_BUCK5DVS1 = 0x2f,
+ MAX8997_REG_BUCK5DVS2 = 0x30,
+ MAX8997_REG_BUCK5DVS3 = 0x31,
+ MAX8997_REG_BUCK5DVS4 = 0x32,
+ MAX8997_REG_BUCK5DVS5 = 0x33,
+ MAX8997_REG_BUCK5DVS6 = 0x34,
+ MAX8997_REG_BUCK5DVS7 = 0x35,
+ MAX8997_REG_BUCK5DVS8 = 0x36,
+ MAX8997_REG_BUCK6CTRL = 0x37,
+ MAX8997_REG_BUCK6BPSKIPCTRL = 0x38,
+ MAX8997_REG_BUCK7CTRL = 0x39,
+ MAX8997_REG_BUCK7DVS = 0x3a,
+ MAX8997_REG_LDO1CTRL = 0x3b,
+ MAX8997_REG_LDO2CTRL = 0x3c,
+ MAX8997_REG_LDO3CTRL = 0x3d,
+ MAX8997_REG_LDO4CTRL = 0x3e,
+ MAX8997_REG_LDO5CTRL = 0x3f,
+ MAX8997_REG_LDO6CTRL = 0x40,
+ MAX8997_REG_LDO7CTRL = 0x41,
+ MAX8997_REG_LDO8CTRL = 0x42,
+ MAX8997_REG_LDO9CTRL = 0x43,
+ MAX8997_REG_LDO10CTRL = 0x44,
+ MAX8997_REG_LDO11CTRL = 0x45,
+ MAX8997_REG_LDO12CTRL = 0x46,
+ MAX8997_REG_LDO13CTRL = 0x47,
+ MAX8997_REG_LDO14CTRL = 0x48,
+ MAX8997_REG_LDO15CTRL = 0x49,
+ MAX8997_REG_LDO16CTRL = 0x4a,
+ MAX8997_REG_LDO17CTRL = 0x4b,
+ MAX8997_REG_LDO18CTRL = 0x4c,
+ MAX8997_REG_LDO21CTRL = 0x4d,
+
+ MAX8997_REG_MBCCTRL1 = 0x50,
+ MAX8997_REG_MBCCTRL2 = 0x51,
+ MAX8997_REG_MBCCTRL3 = 0x52,
+ MAX8997_REG_MBCCTRL4 = 0x53,
+ MAX8997_REG_MBCCTRL5 = 0x54,
+ MAX8997_REG_MBCCTRL6 = 0x55,
+ MAX8997_REG_OTPCGHCVS = 0x56,
+
+ MAX8997_REG_SAFEOUTCTRL = 0x5a,
+
+ MAX8997_REG_LBCNFG1 = 0x5e,
+ MAX8997_REG_LBCNFG2 = 0x5f,
+ MAX8997_REG_BBCCTRL = 0x60,
+
+ MAX8997_REG_FLASH1_CUR = 0x63, /* 0x63 ~ 0x6e for FLASH */
+ MAX8997_REG_FLASH2_CUR = 0x64,
+ MAX8997_REG_MOVIE_CUR = 0x65,
+ MAX8997_REG_GSMB_CUR = 0x66,
+ MAX8997_REG_BOOST_CNTL = 0x67,
+ MAX8997_REG_LEN_CNTL = 0x68,
+ MAX8997_REG_FLASH_CNTL = 0x69,
+ MAX8997_REG_WDT_CNTL = 0x6a,
+ MAX8997_REG_MAXFLASH1 = 0x6b,
+ MAX8997_REG_MAXFLASH2 = 0x6c,
+ MAX8997_REG_FLASHSTATUS = 0x6d,
+ MAX8997_REG_FLASHSTATUSMASK = 0x6e,
+
+ MAX8997_REG_GPIOCNTL1 = 0x70,
+ MAX8997_REG_GPIOCNTL2 = 0x71,
+ MAX8997_REG_GPIOCNTL3 = 0x72,
+ MAX8997_REG_GPIOCNTL4 = 0x73,
+ MAX8997_REG_GPIOCNTL5 = 0x74,
+ MAX8997_REG_GPIOCNTL6 = 0x75,
+ MAX8997_REG_GPIOCNTL7 = 0x76,
+ MAX8997_REG_GPIOCNTL8 = 0x77,
+ MAX8997_REG_GPIOCNTL9 = 0x78,
+ MAX8997_REG_GPIOCNTL10 = 0x79,
+ MAX8997_REG_GPIOCNTL11 = 0x7a,
+ MAX8997_REG_GPIOCNTL12 = 0x7b,
+
+ MAX8997_REG_LDO1CONFIG = 0x80,
+ MAX8997_REG_LDO2CONFIG = 0x81,
+ MAX8997_REG_LDO3CONFIG = 0x82,
+ MAX8997_REG_LDO4CONFIG = 0x83,
+ MAX8997_REG_LDO5CONFIG = 0x84,
+ MAX8997_REG_LDO6CONFIG = 0x85,
+ MAX8997_REG_LDO7CONFIG = 0x86,
+ MAX8997_REG_LDO8CONFIG = 0x87,
+ MAX8997_REG_LDO9CONFIG = 0x88,
+ MAX8997_REG_LDO10CONFIG = 0x89,
+ MAX8997_REG_LDO11CONFIG = 0x8a,
+ MAX8997_REG_LDO12CONFIG = 0x8b,
+ MAX8997_REG_LDO13CONFIG = 0x8c,
+ MAX8997_REG_LDO14CONFIG = 0x8d,
+ MAX8997_REG_LDO15CONFIG = 0x8e,
+ MAX8997_REG_LDO16CONFIG = 0x8f,
+ MAX8997_REG_LDO17CONFIG = 0x90,
+ MAX8997_REG_LDO18CONFIG = 0x91,
+ MAX8997_REG_LDO21CONFIG = 0x92,
+
+ MAX8997_REG_DVSOKTIMER1 = 0x97,
+ MAX8997_REG_DVSOKTIMER2 = 0x98,
+ MAX8997_REG_DVSOKTIMER4 = 0x99,
+ MAX8997_REG_DVSOKTIMER5 = 0x9a,
+
+ PMIC_NUM_OF_REGS = 0x9b,
+};
+
+#define ACTDISSAFEO1 (1 << 4)
+#define ACTDISSAFEO2 (1 << 5)
+#define ENSAFEOUT1 (1 << 6)
+#define ENSAFEOUT2 (1 << 7)
+
+/* Charger */
+enum {CHARGER_ENABLE, CHARGER_DISABLE};
+#define DETBAT (1 << 2)
+#define MBCICHFCSET (1 << 4)
+#define MBCHOSTEN (1 << 6)
+#define VCHGR_FC (1 << 7)
+
+#define CHARGER_MIN_CURRENT 200
+#define CHARGER_MAX_CURRENT 950
+#define CHARGER_CURRENT_RESOLUTION 50
+
+#define MAX8997_I2C_ADDR (0xCC >> 1)
+#define MAX8997_RTC_ADDR (0x0C >> 1)
+#define MAX8997_MUIC_ADDR (0x4A >> 1)
+#define MAX8997_FG_ADDR (0x6C >> 1)
+
+enum {
+ LDO_OFF = 0,
+ LDO_ON = 1,
+
+ DIS_LDO = (0x00 << 6),
+ EN_LDO = (0x3 << 6),
+};
+
+#endif /* __MAX8997_PMIC_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MAX8998_PMIC_H_
+#define __MAX8998_PMIC_H_
+
+/* MAX 8998 registers */
+enum {
+ MAX8998_REG_IRQ1,
+ MAX8998_REG_IRQ2,
+ MAX8998_REG_IRQ3,
+ MAX8998_REG_IRQ4,
+ MAX8998_REG_IRQM1,
+ MAX8998_REG_IRQM2,
+ MAX8998_REG_IRQM3,
+ MAX8998_REG_IRQM4,
+ MAX8998_REG_STATUS1,
+ MAX8998_REG_STATUS2,
+ MAX8998_REG_STATUSM1,
+ MAX8998_REG_STATUSM2,
+ MAX8998_REG_CHGR1,
+ MAX8998_REG_CHGR2,
+ MAX8998_REG_LDO_ACTIVE_DISCHARGE1,
+ MAX8998_REG_LDO_ACTIVE_DISCHARGE2,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+ MAX8998_REG_ONOFF1,
+ MAX8998_REG_ONOFF2,
+ MAX8998_REG_ONOFF3,
+ MAX8998_REG_ONOFF4,
+ MAX8998_REG_BUCK1_VOLTAGE1,
+ MAX8998_REG_BUCK1_VOLTAGE2,
+ MAX8998_REG_BUCK1_VOLTAGE3,
+ MAX8998_REG_BUCK1_VOLTAGE4,
+ MAX8998_REG_BUCK2_VOLTAGE1,
+ MAX8998_REG_BUCK2_VOLTAGE2,
+ MAX8998_REG_BUCK3,
+ MAX8998_REG_BUCK4,
+ MAX8998_REG_LDO2_LDO3,
+ MAX8998_REG_LDO4,
+ MAX8998_REG_LDO5,
+ MAX8998_REG_LDO6,
+ MAX8998_REG_LDO7,
+ MAX8998_REG_LDO8_LDO9,
+ MAX8998_REG_LDO10_LDO11,
+ MAX8998_REG_LDO12,
+ MAX8998_REG_LDO13,
+ MAX8998_REG_LDO14,
+ MAX8998_REG_LDO15,
+ MAX8998_REG_LDO16,
+ MAX8998_REG_LDO17,
+ MAX8998_REG_BKCHR,
+ MAX8998_REG_LBCNFG1,
+ MAX8998_REG_LBCNFG2,
+ PMIC_NUM_OF_REGS,
+};
+
+#define MAX8998_LDO3 (1 << 2)
+#define MAX8998_LDO4 (1 << 1)
+#define MAX8998_LDO8 (1 << 5)
+#define MAX8998_SAFEOUT1 (1 << 4)
+
+#define MAX8998_I2C_ADDR (0xCC >> 1)
+
+enum { LDO_OFF, LDO_ON };
+
+#endif /* __MAX8998_PMIC_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2011-2012 Samsung Electronics
+ * Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CORE_PMIC_H_
+#define __CORE_PMIC_H_
+
+#include <common.h>
+#include <linux/list.h>
+#include <i2c.h>
+
+enum { PMIC_I2C, PMIC_SPI, };
+enum { I2C_PMIC, I2C_NUM, };
+enum { PMIC_READ, PMIC_WRITE, };
+enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, };
+
+struct p_i2c {
+ unsigned char addr;
+ unsigned char *buf;
+ unsigned char tx_num;
+};
+
+struct p_spi {
+ unsigned int cs;
+ unsigned int mode;
+ unsigned int bitlen;
+ unsigned int clk;
+ unsigned int flags;
+ u32 (*prepare_tx)(u32 reg, u32 *val, u32 write);
+};
+
+struct pmic {
+ const char *name;
+ unsigned char bus;
+ unsigned char interface;
+ unsigned char sensor_byte_order;
+ unsigned int number_of_regs;
+ union hw {
+ struct p_i2c i2c;
+ struct p_spi spi;
+ } hw;
+
+ struct list_head list;
+};
+
+int pmic_init(unsigned char bus);
+int pmic_dialog_init(unsigned char bus);
+int check_reg(struct pmic *p, u32 reg);
+struct pmic *pmic_alloc(void);
+struct pmic *pmic_get(const char *s);
+int pmic_probe(struct pmic *p);
+int pmic_reg_read(struct pmic *p, u32 reg, u32 *val);
+int pmic_reg_write(struct pmic *p, u32 reg, u32 val);
+int pmic_set_output(struct pmic *p, u32 reg, int ldo, int on);
+
+#define pmic_i2c_addr (p->hw.i2c.addr)
+#define pmic_i2c_tx_num (p->hw.i2c.tx_num)
+
+#define pmic_spi_bitlen (p->hw.spi.bitlen)
+#define pmic_spi_flags (p->hw.spi.flags)
+
+#endif /* __CORE_PMIC_H_ */
projects / u-boot / commitdiff