wbinvd
+ /* Determine our load offset */
+ call 1f
+1: popl %ecx
+ subl $1b, %ecx
+
/* Set the upper memory limit parameter */
subl $CONFIG_SYS_STACK_SIZE, %eax
/* %eax points to the global data structure */
movl %esp, (GD_RAM_SIZE * 4)(%eax)
movl %ebx, (GD_FLAGS * 4)(%eax)
+ movl %ecx, (GD_LOAD_OFF * 4)(%eax)
call board_init_f /* Enter, U-boot! */
unsigned long baudrate;
unsigned long have_console; /* serial_init() was called */
unsigned long reloc_off; /* Relocation Offset */
+ unsigned long load_off; /* Load Offset */
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
unsigned long cpu_clk; /* CPU clock in Hz! */
#endif
/* Word Offsets into Global Data - MUST match struct gd_t */
-#define GD_BD 0
-#define GD_FLAGS 1
-#define GD_BAUDRATE 2
-#define GD_HAVE_CONSOLE 3
-#define GD_RELOC_OFF 4
-#define GD_ENV_ADDR 5
-#define GD_ENV_VALID 6
-#define GD_CPU_CLK 7
-#define GD_BUS_CLK 8
-#define GD_RAM_SIZE 9
-#define GD_RESET_STATUS 10
-#define GD_JT 11
+#define GD_BD 0
+#define GD_FLAGS 1
+#define GD_BAUDRATE 2
+#define GD_HAVE_CONSOLE 3
+#define GD_RELOC_OFF 4
+#define GD_LOAD_OFF 5
+#define GD_ENV_ADDR 6
+#define GD_ENV_VALID 7
+#define GD_CPU_CLK 8
+#define GD_BUS_CLK 9
+#define GD_RAM_SIZE 10
+#define GD_RESET_STATUS 11
+#define GD_JT 12
-#define GD_SIZE 12
+#define GD_SIZE 13
/*
* Global Data Flags
dest_addr = (void *)gdp - (bss_end - text_start);
rel_offset = text_start - dest_addr;
- /* First stage CPU initialization */
- if (cpu_init_f() != 0)
- hang();
-
- /* First stage Board initialization */
- if (board_early_init_f() != 0)
- hang();
+ /* Perform low-level initialization only when cold booted */
+ if (((gd_t *)gdp)->flags & GD_FLG_COLD_BOOT) {
+ /* First stage CPU initialization */
+ if (cpu_init_f() != 0)
+ hang();
+
+ /* First stage Board initialization */
+ if (board_early_init_f() != 0)
+ hang();
+ }
/* Copy U-Boot into RAM */
dst_addr = (ulong *)dest_addr;
- src_addr = (ulong *)text_start;
- end_addr = (ulong *)data_end;
+ src_addr = (ulong *)(text_start + ((gd_t *)gdp)->load_off);
+ end_addr = (ulong *)(data_end + ((gd_t *)gdp)->load_off);
while (src_addr < end_addr)
*dst_addr++ = *src_addr++;
*dst_addr++ = 0x00000000;
/* Perform relocation adjustments */
- re_src = (Elf32_Rel *)rel_dyn_start;
- re_end = (Elf32_Rel *)rel_dyn_end;
+ re_src = (Elf32_Rel *)(rel_dyn_start + ((gd_t *)gdp)->load_off);
+ re_end = (Elf32_Rel *)(rel_dyn_end + ((gd_t *)gdp)->load_off);
do {
if (re_src->r_offset >= TEXT_BASE)