Changes since U-Boot 1.0.0:
======================================================================
+* Patches by Stephan Linz, 11 Dec 2003:
+ - more documentation for NIOS port
+ - new struct nios_pio_t, struct nios_spi_t
+ - Reconfiguration for NIOS Development Kit DK1C20:
+ o move board related code from board/dk1c20
+ to board/altera/dk1c20
+ o create a new common source path board/altera/common
+ and move generic flash access stuff into it
+ o change/expand configuration file DK1C20.h
+ - Add support for NIOS Development Kit DK1S10
+ - Add status LED support for NIOS systems
+ - Add dual 7-segment LED support for Altera NIOS DevKits
+
* Patch by Ronen Shitrit, 10 Dec 2003:
Add support for the Marvell DB64360 / DB64460 development boards
D: Support for LEOX boards, DS164x RTC
W: http://www.leox.org
+N: Stephan Linz
+E: linz@li-pro.net
+D: Support for Nios Stratix Development Kit (DK-1S10)
+W: http://www.li-pro.net
+
N: Raymond Lo
E: lo@routefree.com
D: Support for DOS partitions
# Board CPU #
#########################################################################
+Stephan Linz <linz@li-pro.net>
+
+ DK1S10 Nios-32
+
Scott McNutt <smcnutt@psyent.com>
DK1C20 Nios-32
LIST_x86="${LIST_I486}"
+#########################################################################
+## NIOS Systems
+#########################################################################
+
+LIST_nios=" \
+ DK1C20 DK1C20_standard_32 \
+ DK1S10 DK1S10_standard_32 \
+"
+
#-----------------------------------------------------------------------
#----- for now, just run PPC by default -----
ppc|5xx|5xxx|8xx|824x|8260|85xx|4xx|7xx|74xx| \
arm|SA|ARM7|ARM9|pxa|ixp| \
mips| \
+ nios| \
x86|I486)
for target in `eval echo '$LIST_'${arg}`
do
## Nios32
#########################################################################
+DK1C20_safe_32_config \
+DK1C20_standard_32_config \
DK1C20_config: unconfig
- @./mkconfig $(@:_config=) nios nios dk1c20
+ @ >include/config.h
+ @[ -z "$(findstring _safe_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \
+ echo "... NIOS 'safe_32' configuration" ; \
+ }
+ @[ -z "$(findstring _standard_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ echo "... NIOS 'standard_32' configuration" ; \
+ }
+ @[ -z "$(findstring DK1C20_config,$@)" ] || \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
+ }
+ @./mkconfig -a DK1C20 nios nios dk1c20 altera
+
+DK1S10_safe_32_config \
+DK1S10_standard_32_config \
+DK1S10_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring _safe_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \
+ echo "... NIOS 'safe_32' configuration" ; \
+ }
+ @[ -z "$(findstring _standard_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ echo "... NIOS 'standard_32' configuration" ; \
+ }
+ @[ -z "$(findstring DK1S10_config,$@)" ] || \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
+ }
+ @./mkconfig -a DK1S10 nios nios dk1s10 altera
#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <nios.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+/*--------------------------------------------------------------------*/
+void flash_print_info (flash_info_t * info)
+{
+ int i, k;
+ unsigned long size;
+ int erased;
+ volatile unsigned char *flash;
+
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+
+ /* Check if whole sector is erased */
+ if (i != (info->sector_count - 1))
+ size = info->start[i + 1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned char *) info->start[i];
+ for (k = 0; k < size; k++) {
+ if (*flash++ != 0xff) {
+ erased = 0;
+ break;
+ }
+ }
+
+ /* Print the info */
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s%s", info->start[i], erased ? " E" : " ",
+ info->protect[i] ? "RO " : " ");
+ }
+ printf ("\n");
+}
+
+/*-------------------------------------------------------------------*/
+
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int prot, sect;
+ int any = 0;
+ unsigned oldpri;
+ ulong start;
+
+ /* Some sanity checking */
+ if ((s_first < 0) || (s_first > s_last)) {
+ printf ("- no sectors to erase\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ /* NOTE: disabling interrupts on Nios can be very bad since it
+ * also disables the LO_LIMIT exception. It's better here to
+ * set the interrupt priority to 3 & restore it when we're done.
+ */
+ oldpri = ipri (3);
+
+ /* It's ok to erase multiple sectors provided we don't delay more
+ * than 50 usec between cmds ... at which point the erase time-out
+ * occurs. So don't go and put printf() calls in the loop ... it
+ * won't be very helpful ;-)
+ */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ *addr = 0xaa;
+ *addr = 0x55;
+ *addr = 0x80;
+ *addr = 0xaa;
+ *addr = 0x55;
+ *addr2 = 0x30;
+ any = 1;
+ }
+ }
+
+ /* Now just wait for 0xff & provide some user feedback while
+ * we wait.
+ */
+ if (any) {
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ start = get_timer (0);
+ while (*addr2 != 0xff) {
+ udelay (1000 * 1000);
+ putc ('.');
+ if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ printf ("timeout\n");
+ return 1;
+ }
+ }
+ printf ("\n");
+ }
+
+ /* Restore interrupt priority */
+ ipri (oldpri);
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+
+ vu_char *cmd = (vu_char *) info->start[0];
+ vu_char *dst = (vu_char *) addr;
+ unsigned char b;
+ unsigned oldpri;
+ ulong start;
+
+ while (cnt) {
+ /* Check for sufficient erase */
+ b = *src;
+ if ((*dst & b) != b) {
+ printf ("%02x : %02x\n", *dst, b);
+ return (2);
+ }
+
+ /* Disable interrupts other than window underflow
+ * (interrupt priority 2)
+ */
+ oldpri = ipri (3);
+ *cmd = 0xaa;
+ *cmd = 0x55;
+ *cmd = 0xa0;
+ *dst = b;
+
+ /* Verify write */
+ start = get_timer (0);
+ while (*dst != b) {
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ ipri (oldpri);
+ return 1;
+ }
+ }
+ dst++;
+ src++;
+ cnt--;
+ ipri (oldpri);
+ }
+
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * common/sevenseg.c
+ *
+ * NIOS PIO based seven segment led support functions
+ */
+
+#include <common.h>
+#include <nios-io.h>
+
+#ifdef CONFIG_SEVENSEG
+
+#define SEVENDEG_MASK_DP ((SEVENSEG_DIGIT_DP << 8) | SEVENSEG_DIGIT_DP)
+
+#ifdef SEVENSEG_WRONLY /* emulate read access */
+#if (SEVENSEG_ACTIVE == 0)
+static unsigned int sevenseg_portval = ~0;
+#else
+static unsigned int sevenseg_portval = 0;
+#endif
+#endif
+
+static int sevenseg_init_done = 0;
+
+static inline void __sevenseg_set_masked (unsigned int mask, int value)
+{
+ nios_pio_t *piop = (nios_pio_t*)SEVENSEG_BASE;
+
+#ifdef SEVENSEG_WRONLY /* emulate read access */
+
+#if (SEVENSEG_ACTIVE == 0)
+ if (value)
+ sevenseg_portval &= ~mask;
+ else
+ sevenseg_portval |= mask;
+#else
+ if (value)
+ sevenseg_portval |= mask;
+ else
+ sevenseg_portval &= ~mask;
+#endif
+
+ piop->data = sevenseg_portval;
+
+#else /* !SEVENSEG_WRONLY */
+
+#if (SEVENSEG_ACTIVE == 0)
+ if (value)
+ piop->data &= ~mask;
+ else
+ piop->data |= mask;
+#else
+ if (value)
+ piop->data |= mask;
+ else
+ piop->data &= ~mask;
+#endif
+
+#endif /* SEVENSEG_WRONLY */
+}
+
+static inline void __sevenseg_toggle_masked (unsigned int mask)
+{
+ nios_pio_t *piop = (nios_pio_t*)SEVENSEG_BASE;
+
+#ifdef SEVENSEG_WRONLY /* emulate read access */
+
+ sevenseg_portval ^= mask;
+ piop->data = sevenseg_portval;
+
+#else /* !SEVENSEG_WRONLY */
+
+ piop->data ^= mask;
+
+#endif /* SEVENSEG_WRONLY */
+}
+
+static inline void __sevenseg_set (unsigned int value)
+{
+ nios_pio_t *piop = (nios_pio_t*)SEVENSEG_BASE;
+
+#ifdef SEVENSEG_WRONLY /* emulate read access */
+
+#if (SEVENSEG_ACTIVE == 0)
+ sevenseg_portval = (sevenseg_portval & SEVENDEG_MASK_DP)
+ | ((~value) & (~SEVENDEG_MASK_DP));
+#else
+ sevenseg_portval = (sevenseg_portval & SEVENDEG_MASK_DP)
+ | (value);
+#endif
+
+ piop->data = sevenseg_portval;
+
+#else /* !SEVENSEG_WRONLY */
+
+#if (SEVENSEG_ACTIVE == 0)
+ piop->data = (piop->data & SEVENDEG_MASK_DP)
+ | ((~value) & (~SEVENDEG_MASK_DP));
+#else
+ piop->data = (piop->data & SEVENDEG_MASK_DP)
+ | (value);
+#endif
+
+#endif /* SEVENSEG_WRONLY */
+}
+
+static inline void __sevenseg_init (void)
+{
+ nios_pio_t *piop = (nios_pio_t*)SEVENSEG_BASE;
+
+ __sevenseg_set(0);
+
+#ifndef SEVENSEG_WRONLY /* setup direction */
+
+ piop->direction |= mask;
+
+#endif /* SEVENSEG_WRONLY */
+}
+
+
+void sevenseg_set(int value)
+{
+ unsigned char digits[] = {
+ SEVENSEG_DIGITS_0,
+ SEVENSEG_DIGITS_1,
+ SEVENSEG_DIGITS_2,
+ SEVENSEG_DIGITS_3,
+ SEVENSEG_DIGITS_4,
+ SEVENSEG_DIGITS_5,
+ SEVENSEG_DIGITS_6,
+ SEVENSEG_DIGITS_7,
+ SEVENSEG_DIGITS_8,
+ SEVENSEG_DIGITS_9,
+ SEVENSEG_DIGITS_A,
+ SEVENSEG_DIGITS_B,
+ SEVENSEG_DIGITS_C,
+ SEVENSEG_DIGITS_D,
+ SEVENSEG_DIGITS_E,
+ SEVENSEG_DIGITS_F
+ };
+
+ if (!sevenseg_init_done) {
+ __sevenseg_init();
+ sevenseg_init_done++;
+ }
+
+ switch (value & SEVENSEG_MASK_CTRL) {
+
+ case SEVENSEG_RAW:
+ __sevenseg_set( (
+ (digits[((value & SEVENSEG_MASK_VAL) >> 4)] << 8) |
+ digits[((value & SEVENSEG_MASK_VAL) & 0xf)] ) );
+ return;
+ break; /* paranoia */
+
+ case SEVENSEG_OFF:
+ __sevenseg_set(0);
+ __sevenseg_set_masked(SEVENDEG_MASK_DP, 0);
+ return;
+ break; /* paranoia */
+
+ case SEVENSEG_SET_DPL:
+ __sevenseg_set_masked(SEVENSEG_DIGIT_DP, 1);
+ return;
+ break; /* paranoia */
+
+ case SEVENSEG_SET_DPH:
+ __sevenseg_set_masked((SEVENSEG_DIGIT_DP << 8), 1);
+ return;
+ break; /* paranoia */
+
+ case SEVENSEG_RES_DPL:
+ __sevenseg_set_masked(SEVENSEG_DIGIT_DP, 0);
+ return;
+ break; /* paranoia */
+
+ case SEVENSEG_RES_DPH:
+ __sevenseg_set_masked((SEVENSEG_DIGIT_DP << 8), 0);
+ return;
+ break; /* paranoia */
+
+ case SEVENSEG_TOG_DPL:
+ __sevenseg_toggle_masked(SEVENSEG_DIGIT_DP);
+ return;
+ break; /* paranoia */
+
+ case SEVENSEG_TOG_DPH:
+ __sevenseg_toggle_masked((SEVENSEG_DIGIT_DP << 8));
+ return;
+ break; /* paranoia */
+
+ case SEVENSEG_LO:
+ case SEVENSEG_HI:
+ case SEVENSEG_STR:
+ default:
+ break;
+ }
+}
+
+#endif /* CONFIG_SEVENSEG */
--- /dev/null
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * common/sevenseg.h
+ *
+ * NIOS PIO based seven segment led support functions
+ */
+
+#ifndef __DK1S10_SEVENSEG_H__
+#define __DK1S10_SEVENSEG_H__
+
+#ifdef CONFIG_SEVENSEG
+
+/*
+ * 15 8 7 0
+ * |-----------------------|--------|
+ * | controll value | value |
+ * ----------------------------------
+ */
+#define SEVENSEG_RAW (int)(0) /* write out byte value (hex) */
+#define SEVENSEG_OFF (int)( 1 << 8) /* display switch off */
+#define SEVENSEG_SET_DPL (int)( 2 << 8) /* set dp low nibble */
+#define SEVENSEG_SET_DPH (int)( 3 << 8) /* set dp high nibble */
+#define SEVENSEG_RES_DPL (int)( 4 << 8) /* reset dp low nibble */
+#define SEVENSEG_RES_DPH (int)( 5 << 8) /* reset dp high nibble */
+#define SEVENSEG_TOG_DPL (int)( 6 << 8) /* toggle dp low nibble */
+#define SEVENSEG_TOG_DPH (int)( 7 << 8) /* toggle dp high nibble */
+#define SEVENSEG_LO (int)( 8 << 8) /* write out low nibble only */
+#define SEVENSEG_HI (int)( 9 << 8) /* write out high nibble only */
+#define SEVENSEG_STR (int)(10 << 8) /* write out a string */
+
+#define SEVENSEG_MASK_VAL (0xff) /* only used by SEVENSEG_RAW */
+#define SEVENSEG_MASK_CTRL (~SEVENSEG_MASK_VAL)
+
+#ifdef SEVENSEG_DIGIT_HI_LO_EQUAL
+
+#define SEVENSEG_DIGITS_0 ( SEVENSEG_DIGIT_A \
+ | SEVENSEG_DIGIT_B \
+ | SEVENSEG_DIGIT_C \
+ | SEVENSEG_DIGIT_D \
+ | SEVENSEG_DIGIT_E \
+ | SEVENSEG_DIGIT_F )
+#define SEVENSEG_DIGITS_1 ( SEVENSEG_DIGIT_B \
+ | SEVENSEG_DIGIT_C )
+#define SEVENSEG_DIGITS_2 ( SEVENSEG_DIGIT_A \
+ | SEVENSEG_DIGIT_B \
+ | SEVENSEG_DIGIT_D \
+ | SEVENSEG_DIGIT_E \
+ | SEVENSEG_DIGIT_G )
+#define SEVENSEG_DIGITS_3 ( SEVENSEG_DIGIT_A \
+ | SEVENSEG_DIGIT_B \
+ | SEVENSEG_DIGIT_C \
+ | SEVENSEG_DIGIT_D \
+ | SEVENSEG_DIGIT_G )
+#define SEVENSEG_DIGITS_4 ( SEVENSEG_DIGIT_B \
+ | SEVENSEG_DIGIT_C \
+ | SEVENSEG_DIGIT_F \
+ | SEVENSEG_DIGIT_G )
+#define SEVENSEG_DIGITS_5 ( SEVENSEG_DIGIT_A \
+ | SEVENSEG_DIGIT_C \
+ | SEVENSEG_DIGIT_D \
+ | SEVENSEG_DIGIT_F \
+ | SEVENSEG_DIGIT_G )
+#define SEVENSEG_DIGITS_6 ( SEVENSEG_DIGIT_A \
+ | SEVENSEG_DIGIT_C \
+ | SEVENSEG_DIGIT_D \
+ | SEVENSEG_DIGIT_E \
+ | SEVENSEG_DIGIT_F \
+ | SEVENSEG_DIGIT_G )
+#define SEVENSEG_DIGITS_7 ( SEVENSEG_DIGIT_A \
+ | SEVENSEG_DIGIT_B \
+ | SEVENSEG_DIGIT_C )
+#define SEVENSEG_DIGITS_8 ( SEVENSEG_DIGIT_A \
+ | SEVENSEG_DIGIT_B \
+ | SEVENSEG_DIGIT_C \
+ | SEVENSEG_DIGIT_D \
+ | SEVENSEG_DIGIT_E \
+ | SEVENSEG_DIGIT_F \
+ | SEVENSEG_DIGIT_G )
+#define SEVENSEG_DIGITS_9 ( SEVENSEG_DIGIT_A \
+ | SEVENSEG_DIGIT_B \
+ | SEVENSEG_DIGIT_C \
+ | SEVENSEG_DIGIT_D \
+ | SEVENSEG_DIGIT_F \
+ | SEVENSEG_DIGIT_G )
+#define SEVENSEG_DIGITS_A ( SEVENSEG_DIGIT_A \
+ | SEVENSEG_DIGIT_B \
+ | SEVENSEG_DIGIT_C \
+ | SEVENSEG_DIGIT_E \
+ | SEVENSEG_DIGIT_F \
+ | SEVENSEG_DIGIT_G )
+#define SEVENSEG_DIGITS_B ( SEVENSEG_DIGIT_C \
+ | SEVENSEG_DIGIT_D \
+ | SEVENSEG_DIGIT_E \
+ | SEVENSEG_DIGIT_F \
+ | SEVENSEG_DIGIT_G )
+#define SEVENSEG_DIGITS_C ( SEVENSEG_DIGIT_D \
+ | SEVENSEG_DIGIT_E \
+ | SEVENSEG_DIGIT_G )
+#define SEVENSEG_DIGITS_D ( SEVENSEG_DIGIT_B \
+ | SEVENSEG_DIGIT_C \
+ | SEVENSEG_DIGIT_D \
+ | SEVENSEG_DIGIT_E \
+ | SEVENSEG_DIGIT_G )
+#define SEVENSEG_DIGITS_E ( SEVENSEG_DIGIT_A \
+ | SEVENSEG_DIGIT_D \
+ | SEVENSEG_DIGIT_E \
+ | SEVENSEG_DIGIT_F \
+ | SEVENSEG_DIGIT_G )
+#define SEVENSEG_DIGITS_F ( SEVENSEG_DIGIT_A \
+ | SEVENSEG_DIGIT_E \
+ | SEVENSEG_DIGIT_F \
+ | SEVENSEG_DIGIT_G )
+
+#else /* !SEVENSEG_DIGIT_HI_LO_EQUAL */
+#error SEVENSEG: different pin asssignments not supported
+#endif
+
+void sevenseg_set(int value);
+
+#endif /* CONFIG_SEVENSEG */
+
+#endif /* __DK1S10_SEVENSEG_H__ */
--- /dev/null
+#
+# (C) Copyright 2001-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := $(BOARD).o flash.o misc.o
+
+SOBJS = vectors.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2003
+# Psyent Corporation
+# Scott McNutt <smcnutt@psyent.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x018c0000
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined(CONFIG_SEVENSEG)
+#include "../common/sevenseg.h"
+#endif
+
+void _default_hdlr (void)
+{
+ printf ("default_hdlr\n");
+}
+
+int board_pre_init (void)
+{
+ /* init seven segment led display and switch off */
+ sevenseg_set(SEVENSEG_OFF);
+ return 0;
+}
+
+int checkboard (void)
+{
+ puts ("Board: Altera Nios 1C20 Development Kit\n");
+ return 0;
+}
+
+long int initdram (int board_type)
+{
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <nios.h>
+
+/*
+ * include common flash code (for altera boards)
+ */
+#include "../common/flash.c"
+
+/*----------------------------------------------------------------------*/
+#define BANKSZ CFG_FLASH_SIZE
+#define SECTSZ (64 * 1024)
+#define USERFLASH (2 * 1024 * 1024) /* bottom 2 MB for user */
+
+/*----------------------------------------------------------------------*/
+unsigned long flash_init (void)
+{
+ int i;
+ unsigned long addr;
+ flash_info_t *fli = &flash_info[0];
+
+ fli->size = BANKSZ;
+ fli->sector_count = CFG_MAX_FLASH_SECT;
+ fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
+
+ addr = CFG_FLASH_BASE;
+ for (i = 0; i < fli->sector_count; ++i) {
+ fli->start[i] = addr;
+ addr += SECTSZ;
+
+ /* Protect all but 2 MByte user area */
+ if (addr < (CFG_FLASH_BASE + USERFLASH))
+ fli->protect[i] = 0;
+ else
+ fli->protect[i] = 1;
+ }
+
+ return (BANKSZ);
+}
--- /dev/null
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * board/altera/dk1s10/misc.c
+ *
+ * miscellaneous board interfaces / drivers
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_SEVENSEG)
+#include "../common/sevenseg.h"
+#include "../common/sevenseg.c"
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-nios")
+OUTPUT_ARCH(nios)
+ENTRY(_start)
+
+SECTIONS
+{
+ .text :
+ {
+ cpu/nios/start.o (.text)
+ *(.text)
+ }
+ __text_end = .;
+
+ . = ALIGN(4);
+ .rodata :
+ {
+ *(.rodata)
+ }
+ __rodata_end = .;
+
+ . = ALIGN(4);
+ .data :
+ {
+ *(.data)
+ }
+ . = ALIGN(4);
+ __data_end = .;
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd :
+ {
+ *(.u_boot_cmd)
+ }
+ . = ALIGN(4);
+ __u_boot_cmd_end = .;
+
+ __bss_start = .;
+ . = ALIGN(4);
+ .bss :
+ {
+ *(.bss)
+ }
+ . = ALIGN(4);
+ __bss_end = .;
+}
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/*************************************************************************
+ * Exception Vector Table
+ *
+ * This could have gone in the cpu soure tree, but the whole point of
+ * Nios is customization -- and polluting the cpu source tree with
+ * board-specific ifdef's really defeats the purpose, no? With this in
+ * the board-specific tree, each board has the freedom to organize
+ * vectors/traps, etc anyway it wants. The init code copies this table
+ * to the proper location.
+ *
+ * Each board can do what it likes here. But there are four "standard"
+ * handlers availble:
+ *
+ * _cwp_lolimit -Handles register window underflows.
+ * _cwp_hilimit -Handles register window overflows.
+ * _timebase_int -Increments the timebase.
+ * _def_xhandler -Default exception handler.
+ *
+ * _timebase_int handles a Nios Timer interrupt and increments the
+ * timestamp used for the get_timer(), reset_timer(), etc. routines. It
+ * expects the timer to be configured like the standard-32 low priority
+ * timer.
+ *
+ * _def_xhandler dispatches exceptions/traps via the external_interrupt()
+ * routine. This lets you use the irq_install_handler() and handle your
+ * interrupts/traps with code written in C.
+ ************************************************************************/
+
+ .data
+ .global _vectors
+ .align 4
+_vectors:
+
+ .long _def_xhandler@h /* Vector 0 - NMI */
+ .long _cwp_lolimit@h /* Vector 1 - underflow */
+ .long _cwp_hilimit@h /* Vector 2 - overflow */
+
+ .long _def_xhandler@h /* Vector 3 - GNUPro debug */
+ .long _def_xhandler@h /* Vector 4 - GNUPro debug */
+ .long _def_xhandler@h /* Vector 5 - GNUPro debug */
+ .long _def_xhandler@h /* Vector 6 - future reserved */
+ .long _def_xhandler@h /* Vector 7 - future reserved */
+ .long _def_xhandler@h /* Vector 8 - future reserved */
+ .long _def_xhandler@h /* Vector 9 - future reserved */
+ .long _def_xhandler@h /* Vector 10 - future reserved */
+ .long _def_xhandler@h /* Vector 11 - future reserved */
+ .long _def_xhandler@h /* Vector 12 - future reserved */
+ .long _def_xhandler@h /* Vector 13 - future reserved */
+ .long _def_xhandler@h /* Vector 14 - future reserved */
+ .long _def_xhandler@h /* Vector 15 - future reserved */
+ .long _def_xhandler@h /* Vector 16 */
+ .long _def_xhandler@h /* Vector 17 */
+ .long _def_xhandler@h /* Vector 18 */
+ .long _def_xhandler@h /* Vector 19 */
+ .long _def_xhandler@h /* Vector 20 */
+ .long _def_xhandler@h /* Vector 21 */
+ .long _def_xhandler@h /* Vector 22 */
+ .long _def_xhandler@h /* Vector 23 */
+ .long _def_xhandler@h /* Vector 24 */
+ .long _def_xhandler@h /* Vector 25 */
+ .long _def_xhandler@h /* Vector 26 */
+ .long _def_xhandler@h /* Vector 27 */
+ .long _def_xhandler@h /* Vector 28 */
+ .long _def_xhandler@h /* Vector 29 */
+ .long _def_xhandler@h /* Vector 30 */
+ .long _def_xhandler@h /* Vector 31 */
+ .long _def_xhandler@h /* Vector 32 */
+ .long _def_xhandler@h /* Vector 33 */
+ .long _def_xhandler@h /* Vector 34 */
+ .long _def_xhandler@h /* Vector 35 */
+ .long _def_xhandler@h /* Vector 36 */
+ .long _def_xhandler@h /* Vector 37 */
+ .long _def_xhandler@h /* Vector 38 */
+ .long _def_xhandler@h /* Vector 39 */
+ .long _def_xhandler@h /* Vector 40 */
+ .long _def_xhandler@h /* Vector 41 */
+ .long _def_xhandler@h /* Vector 42 */
+ .long _def_xhandler@h /* Vector 43 */
+ .long _def_xhandler@h /* Vector 44 */
+ .long _def_xhandler@h /* Vector 45 */
+ .long _def_xhandler@h /* Vector 46 */
+ .long _def_xhandler@h /* Vector 47 */
+ .long _def_xhandler@h /* Vector 48 */
+ .long _def_xhandler@h /* Vector 49 */
+ .long _timebase_int@h /* Vector 50 - lopri timer*/
+ .long _def_xhandler@h /* Vector 51 */
+ .long _def_xhandler@h /* Vector 52 */
+ .long _def_xhandler@h /* Vector 53 */
+ .long _def_xhandler@h /* Vector 54 */
+ .long _def_xhandler@h /* Vector 55 */
+ .long _def_xhandler@h /* Vector 56 */
+ .long _def_xhandler@h /* Vector 57 */
+ .long _def_xhandler@h /* Vector 58 */
+ .long _def_xhandler@h /* Vector 59 */
+ .long _def_xhandler@h /* Vector 60 */
+ .long _def_xhandler@h /* Vector 61 */
+ .long _def_xhandler@h /* Vector 62 */
+ .long _def_xhandler@h /* Vector 63 */
--- /dev/null
+#
+# (C) Copyright 2001-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := $(BOARD).o flash.o misc.o
+
+SOBJS = vectors.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2003
+# Psyent Corporation
+# Scott McNutt <smcnutt@psyent.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x018c0000
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined(CONFIG_SEVENSEG)
+#include "../common/sevenseg.h"
+#endif
+
+void _default_hdlr (void)
+{
+ printf ("default_hdlr\n");
+}
+
+int board_pre_init (void)
+{
+ /* init seven segment led display and switch off */
+ sevenseg_set(SEVENSEG_OFF);
+ return 0;
+}
+
+int checkboard (void)
+{
+ puts ("Board: Altera Nios 1S10 Development Kit\n");
+ return 0;
+}
+
+long int initdram (int board_type)
+{
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <nios.h>
+
+/*
+ * include common flash code (for altera boards)
+ */
+#include "../common/flash.c"
+
+/*---------------------------------------------------------------------*/
+#define BANKSZ (8 * 1024 * 1024)
+#define SECTSZ (64 * 1024)
+#define USERFLASH (2 * 1024 * 1024) /* bottom 2 MB for user */
+
+/*---------------------------------------------------------------------*/
+unsigned long flash_init (void)
+{
+ int i;
+ unsigned long addr;
+ flash_info_t *fli = &flash_info[0];
+
+ fli->size = BANKSZ;
+ fli->sector_count = CFG_MAX_FLASH_SECT;
+ fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
+
+ addr = CFG_FLASH_BASE;
+ for (i = 0; i < fli->sector_count; ++i) {
+ fli->start[i] = addr;
+ addr += SECTSZ;
+
+ /* Protect all but 2 MByte user area */
+ if (addr < (CFG_FLASH_BASE + USERFLASH))
+ fli->protect[i] = 0;
+ else
+ fli->protect[i] = 1;
+ }
+
+ return (BANKSZ);
+}
--- /dev/null
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * board/altera/dk1s10/misc.c
+ *
+ * miscellaneous board interfaces / drivers
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_SEVENSEG)
+#include "../common/sevenseg.h"
+#include "../common/sevenseg.c"
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-nios")
+OUTPUT_ARCH(nios)
+ENTRY(_start)
+
+SECTIONS
+{
+ .text :
+ {
+ cpu/nios/start.o (.text)
+ *(.text)
+ }
+ __text_end = .;
+
+ . = ALIGN(4);
+ .rodata :
+ {
+ *(.rodata)
+ }
+ __rodata_end = .;
+
+ . = ALIGN(4);
+ .data :
+ {
+ *(.data)
+ }
+ . = ALIGN(4);
+ __data_end = .;
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd :
+ {
+ *(.u_boot_cmd)
+ }
+ . = ALIGN(4);
+ __u_boot_cmd_end = .;
+
+ __bss_start = .;
+ . = ALIGN(4);
+ .bss :
+ {
+ *(.bss)
+ }
+ . = ALIGN(4);
+ __bss_end = .;
+}
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/*************************************************************************
+ * Exception Vector Table
+ *
+ * This could have gone in the cpu soure tree, but the whole point of
+ * Nios is customization -- and polluting the cpu source tree with
+ * board-specific ifdef's really defeats the purpose, no? With this in
+ * the board-specific tree, each board has the freedom to organize
+ * vectors/traps, etc anyway it wants. The init code copies this table
+ * to the proper location.
+ *
+ * Each board can do what it likes here. But there are four "standard"
+ * handlers availble:
+ *
+ * _cwp_lolimit -Handles register window underflows.
+ * _cwp_hilimit -Handles register window overflows.
+ * _timebase_int -Increments the timebase.
+ * _def_xhandler -Default exception handler.
+ *
+ * _timebase_int handles a Nios Timer interrupt and increments the
+ * timestamp used for the get_timer(), reset_timer(), etc. routines. It
+ * expects the timer to be configured like the standard-32 low priority
+ * timer.
+ *
+ * _def_xhandler dispatches exceptions/traps via the external_interrupt()
+ * routine. This lets you use the irq_install_handler() and handle your
+ * interrupts/traps with code written in C.
+ ************************************************************************/
+
+ .data
+ .global _vectors
+ .align 4
+_vectors:
+
+ .long _def_xhandler@h /* Vector 0 - NMI */
+ .long _cwp_lolimit@h /* Vector 1 - underflow */
+ .long _cwp_hilimit@h /* Vector 2 - overflow */
+
+ .long _def_xhandler@h /* Vector 3 - GNUPro debug */
+ .long _def_xhandler@h /* Vector 4 - GNUPro debug */
+ .long _def_xhandler@h /* Vector 5 - GNUPro debug */
+ .long _def_xhandler@h /* Vector 6 - future reserved */
+ .long _def_xhandler@h /* Vector 7 - future reserved */
+ .long _def_xhandler@h /* Vector 8 - future reserved */
+ .long _def_xhandler@h /* Vector 9 - future reserved */
+ .long _def_xhandler@h /* Vector 10 - future reserved */
+ .long _def_xhandler@h /* Vector 11 - future reserved */
+ .long _def_xhandler@h /* Vector 12 - future reserved */
+ .long _def_xhandler@h /* Vector 13 - future reserved */
+ .long _def_xhandler@h /* Vector 14 - future reserved */
+ .long _def_xhandler@h /* Vector 15 - future reserved */
+ .long _def_xhandler@h /* Vector 16 */
+ .long _def_xhandler@h /* Vector 17 */
+ .long _def_xhandler@h /* Vector 18 */
+ .long _def_xhandler@h /* Vector 19 */
+ .long _def_xhandler@h /* Vector 20 */
+ .long _def_xhandler@h /* Vector 21 */
+ .long _def_xhandler@h /* Vector 22 */
+ .long _def_xhandler@h /* Vector 23 */
+ .long _def_xhandler@h /* Vector 24 */
+ .long _def_xhandler@h /* Vector 25 */
+ .long _def_xhandler@h /* Vector 26 */
+ .long _def_xhandler@h /* Vector 27 */
+ .long _def_xhandler@h /* Vector 28 */
+ .long _def_xhandler@h /* Vector 29 */
+ .long _def_xhandler@h /* Vector 30 */
+ .long _def_xhandler@h /* Vector 31 */
+ .long _def_xhandler@h /* Vector 32 */
+ .long _def_xhandler@h /* Vector 33 */
+ .long _def_xhandler@h /* Vector 34 */
+ .long _def_xhandler@h /* Vector 35 */
+ .long _def_xhandler@h /* Vector 36 */
+ .long _def_xhandler@h /* Vector 37 */
+ .long _def_xhandler@h /* Vector 38 */
+ .long _def_xhandler@h /* Vector 39 */
+ .long _def_xhandler@h /* Vector 40 */
+ .long _def_xhandler@h /* Vector 41 */
+ .long _def_xhandler@h /* Vector 42 */
+ .long _def_xhandler@h /* Vector 43 */
+ .long _def_xhandler@h /* Vector 44 */
+ .long _def_xhandler@h /* Vector 45 */
+ .long _def_xhandler@h /* Vector 46 */
+ .long _def_xhandler@h /* Vector 47 */
+ .long _def_xhandler@h /* Vector 48 */
+ .long _def_xhandler@h /* Vector 49 */
+ .long _timebase_int@h /* Vector 50 - lopri timer*/
+ .long _def_xhandler@h /* Vector 51 */
+ .long _def_xhandler@h /* Vector 52 */
+ .long _def_xhandler@h /* Vector 53 */
+ .long _def_xhandler@h /* Vector 54 */
+ .long _def_xhandler@h /* Vector 55 */
+ .long _def_xhandler@h /* Vector 56 */
+ .long _def_xhandler@h /* Vector 57 */
+ .long _def_xhandler@h /* Vector 58 */
+ .long _def_xhandler@h /* Vector 59 */
+ .long _def_xhandler@h /* Vector 60 */
+ .long _def_xhandler@h /* Vector 61 */
+ .long _def_xhandler@h /* Vector 62 */
+ .long _def_xhandler@h /* Vector 63 */
+++ /dev/null
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = lib$(BOARD).a
-
-OBJS := $(BOARD).o flash.o
-
-SOBJS = vectors.o
-
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-
--include .depend
-
-#########################################################################
+++ /dev/null
-#
-# (C) Copyright 2003
-# Psyent Corporation
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x018c0000
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
+++ /dev/null
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-void _default_hdlr (void)
-{
- printf ("default_hdlr\n");
-}
-
-int board_pre_init (void)
-{
- return 0;
-}
-
-int checkboard (void)
-{
- puts ("Board: Altera Nios 1C20 Development Kit\n");
- return 0;
-}
-
-long int initdram (int board_type)
-{
- return (0);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <nios.h>
-
-/*---------------------------------------------------------------------*/
-#define BANKSZ (8 * 1024 * 1024)
-#define SECTSZ (64 * 1024)
-#define USERFLASH (2 * 1024 * 1024) /* bottom 2 MB for user */
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-
-#define FLASH_WORD_SIZE unsigned char
-
-/*---------------------------------------------------------------------*/
-
-unsigned long flash_init (void)
-{
- int i;
- unsigned long addr;
- flash_info_t *fli = &flash_info[0];
-
- fli->size = BANKSZ;
- fli->sector_count = CFG_MAX_FLASH_SECT;
- fli->flash_id = FLASH_MAN_AMD;
-
- addr = CFG_FLASH_BASE;
- for (i = 0; i < fli->sector_count; ++i) {
- fli->start[i] = addr;
- addr += SECTSZ;
-
- /* Protect all but 2 MByte user area */
- if (addr < (CFG_FLASH_BASE + USERFLASH))
- fli->protect[i] = 0;
- else
- fli->protect[i] = 1;
- }
-
- return (BANKSZ);
-}
-
-/*--------------------------------------------------------------------*/
-void flash_print_info (flash_info_t * info)
-{
- int i, k;
- unsigned long size;
- int erased;
- volatile unsigned char *flash;
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
-
- /* Check if whole sector is erased */
- if (i != (info->sector_count - 1))
- size = info->start[i + 1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned char *) info->start[i];
- for (k = 0; k < size; k++) {
- if (*flash++ != 0xff) {
- erased = 0;
- break;
- }
- }
-
- /* Print the info */
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s%s", info->start[i], erased ? " E" : " ",
- info->protect[i] ? "RO " : " ");
- }
- printf ("\n");
-}
-
-/*-------------------------------------------------------------------*/
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *addr2;
- int prot, sect;
- int any = 0;
- unsigned oldpri;
- ulong start;
-
- /* Some sanity checking */
- if ((s_first < 0) || (s_first > s_last)) {
- printf ("- no sectors to erase\n");
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /* NOTE: disabling interrupts on Nios can be very bad since it
- * also disables the LO_LIMIT exception. It's better here to
- * set the interrupt priority to 3 & restore it when we're done.
- */
- oldpri = ipri (3);
-
- /* It's ok to erase multiple sectors provided we don't delay more
- * than 50 usec between cmds ... at which point the erase time-out
- * occurs. So don't go and put printf() calls in the loop ... it
- * won't be very helpful ;-)
- */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
- *addr = 0xaa;
- *addr = 0x55;
- *addr = 0x80;
- *addr = 0xaa;
- *addr = 0x55;
- *addr2 = 0x30;
- any = 1;
- }
- }
-
- /* Now just wait for 0xff & provide some user feedback while
- * we wait.
- */
- if (any) {
- addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
- start = get_timer (0);
- while (*addr2 != 0xff) {
- udelay (1000 * 1000);
- putc ('.');
- if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
- printf ("timeout\n");
- return 1;
- }
- }
- printf ("\n");
- }
-
- /* Restore interrupt priority */
- ipri (oldpri);
-
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-
- vu_char *cmd = (vu_char *) info->start[0];
- vu_char *dst = (vu_char *) addr;
- unsigned char b;
- unsigned oldpri;
- ulong start;
-
- while (cnt) {
- /* Check for sufficient erase */
- b = *src;
- if ((*dst & b) != b) {
- printf ("%02x : %02x\n", *dst, b);
- return (2);
- }
-
- /* Disable interrupts other than window underflow
- * (interrupt priority 2)
- */
- oldpri = ipri (3);
- *cmd = 0xaa;
- *cmd = 0x55;
- *cmd = 0xa0;
- *dst = b;
-
- /* Verify write */
- start = get_timer (0);
- while (*dst != b) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
- ipri (oldpri);
- return 1;
- }
- }
- dst++;
- src++;
- cnt--;
- ipri (oldpri);
- }
-
- return (0);
-}
+++ /dev/null
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-OUTPUT_FORMAT("elf32-nios")
-OUTPUT_ARCH(nios)
-ENTRY(_start)
-
-SECTIONS
-{
- .text :
- {
- cpu/nios/start.o (.text)
- *(.text)
- }
- __text_end = .;
-
- . = ALIGN(4);
- .rodata :
- {
- *(.rodata)
- }
- __rodata_end = .;
-
- . = ALIGN(4);
- .data :
- {
- *(.data)
- }
- . = ALIGN(4);
- __data_end = .;
-
- __u_boot_cmd_start = .;
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- }
- . = ALIGN(4);
- __u_boot_cmd_end = .;
-
- __bss_start = .;
- . = ALIGN(4);
- .bss :
- {
- *(.bss)
- }
- . = ALIGN(4);
- __bss_end = .;
-}
+++ /dev/null
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-/*************************************************************************
- * Exception Vector Table
- *
- * This could have gone in the cpu soure tree, but the whole point of
- * Nios is customization -- and polluting the cpu source tree with
- * board-specific ifdef's really defeats the purpose, no? With this in
- * the board-specific tree, each board has the freedom to organize
- * vectors/traps, etc anyway it wants. The init code copies this table
- * to the proper location.
- *
- * Each board can do what it likes here. But there are four "standard"
- * handlers availble:
- *
- * _cwp_lolimit -Handles register window underflows.
- * _cwp_hilimit -Handles register window overflows.
- * _timebase_int -Increments the timebase.
- * _def_xhandler -Default exception handler.
- *
- * _timebase_int handles a Nios Timer interrupt and increments the
- * timestamp used for the get_timer(), reset_timer(), etc. routines. It
- * expects the timer to be configured like the standard-32 low priority
- * timer.
- *
- * _def_xhandler dispatches exceptions/traps via the external_interrupt()
- * routine. This lets you use the irq_install_handler() and handle your
- * interrupts/traps with code written in C.
- ************************************************************************/
-
- .data
- .global _vectors
- .align 4
-_vectors:
-
- .long _def_xhandler@h /* Vector 0 - NMI */
- .long _cwp_lolimit@h /* Vector 1 - underflow */
- .long _cwp_hilimit@h /* Vector 2 - overflow */
-
- .long _def_xhandler@h /* Vector 3 - GNUPro debug */
- .long _def_xhandler@h /* Vector 4 - GNUPro debug */
- .long _def_xhandler@h /* Vector 5 - GNUPro debug */
- .long _def_xhandler@h /* Vector 6 - future reserved */
- .long _def_xhandler@h /* Vector 7 - future reserved */
- .long _def_xhandler@h /* Vector 8 - future reserved */
- .long _def_xhandler@h /* Vector 9 - future reserved */
- .long _def_xhandler@h /* Vector 10 - future reserved */
- .long _def_xhandler@h /* Vector 11 - future reserved */
- .long _def_xhandler@h /* Vector 12 - future reserved */
- .long _def_xhandler@h /* Vector 13 - future reserved */
- .long _def_xhandler@h /* Vector 14 - future reserved */
- .long _def_xhandler@h /* Vector 15 - future reserved */
- .long _def_xhandler@h /* Vector 16 */
- .long _def_xhandler@h /* Vector 17 */
- .long _def_xhandler@h /* Vector 18 */
- .long _def_xhandler@h /* Vector 19 */
- .long _def_xhandler@h /* Vector 20 */
- .long _def_xhandler@h /* Vector 21 */
- .long _def_xhandler@h /* Vector 22 */
- .long _def_xhandler@h /* Vector 23 */
- .long _def_xhandler@h /* Vector 24 */
- .long _def_xhandler@h /* Vector 25 */
- .long _def_xhandler@h /* Vector 26 */
- .long _def_xhandler@h /* Vector 27 */
- .long _def_xhandler@h /* Vector 28 */
- .long _def_xhandler@h /* Vector 29 */
- .long _def_xhandler@h /* Vector 30 */
- .long _def_xhandler@h /* Vector 31 */
- .long _def_xhandler@h /* Vector 32 */
- .long _def_xhandler@h /* Vector 33 */
- .long _def_xhandler@h /* Vector 34 */
- .long _def_xhandler@h /* Vector 35 */
- .long _def_xhandler@h /* Vector 36 */
- .long _def_xhandler@h /* Vector 37 */
- .long _def_xhandler@h /* Vector 38 */
- .long _def_xhandler@h /* Vector 39 */
- .long _def_xhandler@h /* Vector 40 */
- .long _def_xhandler@h /* Vector 41 */
- .long _def_xhandler@h /* Vector 42 */
- .long _def_xhandler@h /* Vector 43 */
- .long _def_xhandler@h /* Vector 44 */
- .long _def_xhandler@h /* Vector 45 */
- .long _def_xhandler@h /* Vector 46 */
- .long _def_xhandler@h /* Vector 47 */
- .long _def_xhandler@h /* Vector 48 */
- .long _def_xhandler@h /* Vector 49 */
- .long _timebase_int@h /* Vector 50 - lopri timer*/
- .long _def_xhandler@h /* Vector 51 */
- .long _def_xhandler@h /* Vector 52 */
- .long _def_xhandler@h /* Vector 53 */
- .long _def_xhandler@h /* Vector 54 */
- .long _def_xhandler@h /* Vector 55 */
- .long _def_xhandler@h /* Vector 56 */
- .long _def_xhandler@h /* Vector 57 */
- .long _def_xhandler@h /* Vector 58 */
- .long _def_xhandler@h /* Vector 59 */
- .long _def_xhandler@h /* Vector 60 */
- .long _def_xhandler@h /* Vector 61 */
- .long _def_xhandler@h /* Vector 62 */
- .long _def_xhandler@h /* Vector 63 */
#endif
-
#define PCI_DEVICE_ID_PLX9056 0x9056
/* Local Configuration Registers Accessible via the PCI Base address + Variable */
#define PCI9056_PERM_VENDOR_ID (0x070 + LOCAL_OFFSET)
#define PCI9056_REVISION_ID (0x074 + LOCAL_OFFSET)
-
#endif /* #ifndef __PLX9056_H_ */
-
#include <asm/ptrace.h>
#include <common.h>
#include <command.h>
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
/****************************************************************************/
nios_timer_t *tmr = (nios_timer_t *)CFG_NIOS_TMRBASE;
tmr->status = 0;
timestamp += CFG_NIOS_TMRMS;
+#ifdef CONFIG_STATUS_LED
+ status_led_tick(timestamp);
+#endif
}
#endif
#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \
(CONFIG_COMMANDS & CFG_CMD_SCSI) || \
- (CONFIG_COMMANDS & CFG_CMD_USB) )
+ (CONFIG_COMMANDS & CFG_CMD_USB) || \
+ (CONFIG_MMC) )
/* ------------------------------------------------------------------------- */
/*
puts (" Capacity: not available\n");
}
}
+#endif /* CFG_CMD_IDE || CFG_CMD_SCSI || CFG_CMD_USB || CONFIG_MMC */
+#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \
+ (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
+ (CONFIG_COMMANDS & CFG_CMD_USB) )
#if defined(CONFIG_MAC_PARTITION) || \
defined(CONFIG_DOS_PARTITION) || \
--- /dev/null
+
+TODO: specify IDE i/f
+ specify ASMI i/f
+ specify OCI
+
+
+===============================================================================
+ C P U , M E M O R Y , I N / O U T C O M P O N E N T S
+===============================================================================
+see also [1]-[6]
+
+CPU: "standard_32"
+ 32 bit NIOS for 50 MHz
+ 256 Byte for register file (15 levels)
+ 4 KByte instruction cache (2 bytes in each cache line)
+ 4 KByte data cache (4 bytes in each cache line)
+ 2 KByte On Chip ROM with GERMS boot monitor
+ no On Chip RAM
+ MSTEP multiplier
+ no Debug Core
+ On Chip Instrumentation (OCI) enabled
+
+ U-Boot CFG: CFG_NIOS_CPU_CLK = 50000000
+ CFG_NIOS_CPU_ICACHE = 4096
+ CFG_NIOS_CPU_DCACHE = 4096
+ CFG_NIOS_CPU_REG_NUMS = 256
+ CFG_NIOS_CPU_MUL = 0
+ CFG_NIOS_CPU_MSTEP = 1
+ CFG_NIOS_CPU_DBG_CORE = 0
+
+OCI: (TODO)
+
+IRQ: Nr. | used by
+ ------+--------------------------------------------------------
+ 16 | TIMER0 | CFG_NIOS_CPU_TIMER0_IRQ = 16
+ 25 | UART0 | CFG_NIOS_CPU_UART0_IRQ = 25
+ 30 | LAN91C111 | CFG_NIOS_CPU_LAN0_IRQ = 30
+ 35 | PIO5 | CFG_NIOS_CPU_PIO5_IRQ = 35
+ 40 | PIO0 | CFG_NIOS_CPU_PIO0_IRQ = 40
+ 45 | ASMI | CFG_NIOS_CPU_ASMI0_IRQ = 45
+ 50 | TIMER1 | CFG_NIOS_CPU_TIMER1_IRQ = 50
+
+MEMORY: 8 MByte Flash
+ 1 MByte SRAM
+ 16 MByte SDRAM
+
+ASMI: (TODO) <-- ASMI part is 4M bits
+
+Timer: TIMER0: high priority programmable timer (IRQ16)
+ TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
+
+ U-Boot CFG: CFG_NIOS_CPU_TICK_TIMER = 1
+ CFG_NIOS_CPU_USER_TIMER = 0
+
+PIO: Nr. | description
+ ------+--------------------------------------------------------
+ PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40)
+ PIO1 | LCD: 11 in/outputs for ASCII LCD
+ PIO2 | LED: 8 outputs for user LEDs
+ PIO3 | SEVENSEG: 16 outputs for user seven segment display
+ PIO4 | RECONF: 1 in/output for . . . . . . . . . . . .
+ PIO5 | CFPRESENT: 1 input for CF present event (IRQ35)
+ PIO6 | CFPOWER: 1 output to controll CF power supply
+ PIO7 | CFATASEL: 1 output to controll CF ATA card select
+
+ U-Boot CFG: CFG_NIOS_CPU_BUTTON_PIO = 0
+ CFG_NIOS_CPU_LCD_PIO = 1
+ CFG_NIOS_CPU_LED_PIO = 2
+ CFG_NIOS_CPU_SEVENSEG_PIO = 3
+ CFG_NIOS_CPU_RECONF_PIO = 4
+ CFG_NIOS_CPU_CFPRESENT_PIO = 5
+ CFG_NIOS_CPU_CFPOWER_PIO = 6
+ CFG_NIOS_CPU_CFATASEL_PIO = 7
+
+UART: UART0: fixed baudrate of 115200, fixed protocol 8N1,
+ without handshake RTS/CTS (IRQ25)
+
+LAN: SMsC LAN91C111 with:
+ - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
+ - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
+
+IDE: (TODO)
+
+
+===============================================================================
+ M E M O R Y M A P
+===============================================================================
+
+- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - -
+
+ 0x02000000 ---32-----------16|15------------0-
+ | : | \
+ | : | |
+ SDRAM | : | > CFG_NIOS_CPU_SRAM_SIZE
+ | : | | = 0x01000000
+ | : | /
+ 0x01000000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE
+ | |
+ : gap :
+ : :
+
+- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
+
+ : :
+ : gap :
+ | |
+ 0x________ ---32-----------16|15------------0-
+ | | | \
+ : (real size : : |
+ ASMI i/f : and content : : > 0x________
+ [5] : unknown) : : |
+ | | | /
+ 0x00920b00 ---32-----------16|15------------0- CFG_NIOS_CPU_ASMI0
+ | |
+ : gap :
+ | |
+ 0x00920a80 ---32-----------16|15------------0-
+ | | | \
+ : (real size : : |
+ IDE i/f : and content : : > 0x00000080
+ [6] : unknown) : : |
+ | | | /
+ 0x00920a00 ---32-----------16|15------------0- CFG_NIOS_CPU_IDE0
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ TIMER1 | (unused) | |
+ [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
+ | (unused) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | control (1 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | status (2 bit) (rw) | /
+ 0x009209e0 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER1
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO7 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (wo) | /
+ 0x009209d0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO7
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO6 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (wo) | /
+ 0x009209c0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO6
+ | edgecapture (1 bit) (rw) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO5 | interruptmask (1 bit) (rw) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (ro) | /
+ 0x009209b0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO5
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO4 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | direction (1 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (rw) | /
+ 0x009209a0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO4
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO3 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (16 bit) (wo) | /
+ 0x00920990 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO3
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO2 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (8 bit) (wo) | /
+ 0x00920980 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO2
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO1 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | direction (11 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (11 bit) (rw) | /
+ 0x00920970 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO1
+ | edgecapture (4 bit) (rw) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO0 | interruptmask (4 bit) (rw) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (4 bit) (ro) | /
+ 0x00920960 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO0
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | snaph (16 bit) (rw) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ TIMER0 | snapl (16 bit) (rw) | |
+ [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
+ | periodh (16 bit) (rw) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | periodl (16 bit) (rw) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | control (4 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | status (2 bit) (rw) | /
+ 0x00920940 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER0
+ | | \
+ : gap : > (space for UART1)
+ | | /
+ 0x00920920 ---32-----------16|15------------0-
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ UART0 | (unused) | > 0x00000020
+ [2] + 0x10 |- - - - - - - - - - - - - - - -| |
+ | control (10 bit) (rw) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | status (10 bit) (rw) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | txdata (8 bit) (wo) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | rxdata (8 bit) (ro) | /
+ 0x00920900 ---32-----------16|15------------0- CFG_NIOS_CPU_UART0
+
+- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - -
+
+ 0x00920900 -----------------------------------
+ | | \
+ : (real size : |
+ OCI Debug : and content : > CFG_NIOS_CPU_OCI_SIZE
+ : unknown) : | = 0x00000100
+ | | /
+ 0x00920800 ----------------------------------- CFG_NIOS_CPU_OCI_BASE
+
+- - - - - - - - - - - on chip memory - - - - - - - - - - -
+
+ 0x00920800 ---32-----------16|15------------0-
+ | : | \
+ | : | |
+ GERMS | : | > CFG_NIOS_CPU_ROM_SIZE
+ | : | | = 0x00000800
+ | : | /
+ 0x00920000 |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
+ 0x00920000 ---32-----------16|15------------0- CFG_NIOS_CPU_ROM_BASE
+
+- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
+
+ 0x00920000 ---32-----------16|15------------0-
+ | gap | \
+ 0x00910310 --+-------------------------------| |
+ | | |
+ | register bank (size = 0x10) | |
+ | +--------.---.---.--- | |
+ | | bank 0 \ 1 \ 2 \ 3 \ | |
+ | |---------------------------+ | |
+ LAN91C111 | | BANK | RESERVED | | |
+ | |- - - - - - -|- - - - - - -| | > na_lan91c111_size
+ | | RPCR | MIR | | | = 0x00010000
+ | |- - - - - - -|- - - - - - -| | |
+ | | COUNTER | RCR | | |
+ | |- - - - - - -|- - - - - - -| | |
+ | | EPH STATUS | TCR | | |
+ | +---------------------------+ | |
+ 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
+ | gap | /
+ 0x00910000 ---32-----------16|15------------0- CFG_NIOS_CPU_LAN0_BASE
+ | |
+ : gap :
+ : :
+
+- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - -
+
+ : :
+ : gap :
+ | |
+ 0x00900000 ---32-----------16|15------------0-
+ 0x00900000 --+32-----------16|15------------0+
+ | : | \ \
+ | : | | |
+ | : | | > CFG_NIOS_CPU_VEC_SIZE
+ | : | | | = 0x00000100
+ | : | | /
+ 0x008fff00 |- - - - - - - -:- - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE
+ 0x008fff00 |- - - - - - - -:- - - - - - - -+-|- CFG_NIOS_CPU_STACK
+ | : | | \
+ | : | | |
+ | : | | > stack area
+ | : | | |
+ | : | | V
+ | : | |
+ SRAM | : | > CFG_NIOS_CPU_SRAM_SIZE
+ | : | | = 0x00100000
+ | : | /
+ 0x00800000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE
+ 0x00800000 ---8-------------4|3-------------0-
+ | sector 127 | \
+ + 0x7f0000 |- - - - - - - - - - - - - - - -| |
+ | : | |
+ Flash |- - - - : - - - -| > CFG_NIOS_CPU_FLASH_SIZE
+ | sector 1 : | | = 0x00800000
+ + 0x010000 |- - - - - - - - - - - - - - - -| |
+ | sector 0 (size = 0x10000) | /
+ 0x00000000 ---8-------------4|3-------------0- CFG_NIOS_CPU_FLASH_BASE
+
+
+===============================================================================
+ F L A S H M E M O R Y A L L O C A T I O N
+===============================================================================
+
+ 0x00800000 ---8-------------4|3-------------0-
+ | : | \
+ SAFE | : | > 1 MByte
+ FPGA conf. | : | / (NOT usable by software)
+ 0x00700000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ USER | : | > 1 MByte
+ FPGA conf. | : | / (NOT usable by software)
+ 0x00600000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ | : | |
+ WEB pages | : | > 2 MByte
+ | : | | (provisory usable)
+ | : | /
+ 0x00400000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ | : | |
+ | : | |
+ | : | > 4 MByte free for use
+ | : | |
+ 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
+ | : | /
+ 0x00000000 ---8-------------4|3-------------0-
+
+
+===============================================================================
+ R E F E R E N C E S
+===============================================================================
+[1] http://www.altera.com/literature/manual/mnl_nios_board_cyclone_1c20.pdf
+[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
+[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
+[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
+[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf
+ http://www.altera.com/literature/wp/wp_epcs_cyc.pdf
+[6] http://www.opencores.org/projects/ata/
+ http://www.t13.org/index.html
+
+
+===============================================================================
+Stephan Linz <linz@li-pro.net>
--- /dev/null
+
+TODO: specify IDE i/f
+ specify OCI
+
+
+===============================================================================
+ C P U , M E M O R Y , I N / O U T C O M P O N E N T S
+===============================================================================
+see also [1]-[5]
+
+CPU: "standard_32"
+ 32 bit NIOS for 50 MHz
+ 256 Byte for register file (15 levels)
+ 4 KByte instruction cache (4 bytes in each cache line)
+ 4 KByte data cache (4 bytes in each cache line)
+ 2 KByte On Chip ROM with GERMS boot monitor
+ 64 KByte On Chip RAM
+ MSTEP multiplier
+ no Debug Core
+ On Chip Instrumentation (OCI) enabled
+
+ U-Boot CFG: CFG_NIOS_CPU_CLK = 50000000
+ CFG_NIOS_CPU_ICACHE = 4096
+ CFG_NIOS_CPU_DCACHE = 4096
+ CFG_NIOS_CPU_REG_NUMS = 256
+ CFG_NIOS_CPU_MUL = 0
+ CFG_NIOS_CPU_MSTEP = 1
+ CFG_NIOS_CPU_DBG_CORE = 0
+
+OCI: (TODO)
+
+IRQ: Nr. | used by
+ ------+--------------------------------------------------------
+ 16 | TIMER0 | CFG_NIOS_CPU_TIMER0_IRQ = 16
+ 25 | UART0 | CFG_NIOS_CPU_UART0_IRQ = 25
+ 30 | LAN91C111 | CFG_NIOS_CPU_LAN0_IRQ = 30
+ 35 | PIO5 | CFG_NIOS_CPU_PIO5_IRQ = 35
+ 40 | PIO0 | CFG_NIOS_CPU_PIO0_IRQ = 40
+ 50 | TIMER1 | CFG_NIOS_CPU_TIMER1_IRQ = 50
+
+MEMORY: 8 MByte Flash
+ 1 MByte SRAM
+ 16 MByte SDRAM
+
+Timer: TIMER0: high priority programmable timer (IRQ16)
+ TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
+
+ U-Boot CFG: CFG_NIOS_CPU_TICK_TIMER = 1
+ CFG_NIOS_CPU_USER_TIMER = 0
+
+PIO: Nr. | description
+ ------+--------------------------------------------------------
+ PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40)
+ PIO1 | LCD: 11 in/outputs for ASCII LCD
+ PIO2 | LED: 8 outputs for user LEDs
+ PIO3 | SEVENSEG: 16 outputs for user seven segment display
+ PIO4 | RECONF: 1 in/output for . . . . . . . . . . . .
+ PIO5 | CFPRESENT: 1 input for CF present event (IRQ35)
+ PIO6 | CFPOWER: 1 output to controll CF power supply
+ PIO7 | CFATASEL: 1 output to controll CF ATA card select
+
+ U-Boot CFG: CFG_NIOS_CPU_BUTTON_PIO = 0
+ CFG_NIOS_CPU_LCD_PIO = 1
+ CFG_NIOS_CPU_LED_PIO = 2
+ CFG_NIOS_CPU_SEVENSEG_PIO = 3
+ CFG_NIOS_CPU_RECONF_PIO = 4
+ CFG_NIOS_CPU_CFPRESENT_PIO = 5
+ CFG_NIOS_CPU_CFPOWER_PIO = 6
+ CFG_NIOS_CPU_CFATASEL_PIO = 7
+
+UART: UART0: fixed baudrate of 115200, fixed protocol 8N1,
+ without handshake RTS/CTS (IRQ25)
+
+LAN: SMsC LAN91C111 with:
+ - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
+ - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
+
+IDE: (TODO)
+
+
+===============================================================================
+ M E M O R Y M A P
+===============================================================================
+
+- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - -
+
+ 0x02000000 ---32-----------16|15------------0-
+ | : | \
+ | : | |
+ SDRAM | : | > CFG_NIOS_CPU_SRAM_SIZE
+ | : | | = 0x01000000
+ | : | /
+ 0x01000000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE
+ | |
+ : gap :
+ : :
+
+- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
+
+ : :
+ : gap :
+ | |
+ 0x00920a80 ---32-----------16|15------------0-
+ | | | \
+ : (real size : : |
+ IDE i/f : and content : : > 0x00000080
+ [5] : unknown) : : |
+ | | | /
+ 0x00920a00 ---32-----------16|15------------0- CFG_NIOS_CPU_IDE0
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ TIMER1 | (unused) | |
+ [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
+ | (unused) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | control (1 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | status (2 bit) (rw) | /
+ 0x009209e0 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER1
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO7 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (wo) | /
+ 0x009209d0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO7
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO6 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (wo) | /
+ 0x009209c0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO6
+ | edgecapture (1 bit) (rw) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO5 | interruptmask (1 bit) (rw) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (ro) | /
+ 0x009209b0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO5
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO4 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | direction (1 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (rw) | /
+ 0x009209a0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO4
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO3 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (16 bit) (wo) | /
+ 0x00920990 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO3
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO2 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (8 bit) (wo) | /
+ 0x00920980 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO2
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO1 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | direction (11 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (11 bit) (rw) | /
+ 0x00920970 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO1
+ | edgecapture (4 bit) (rw) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO0 | interruptmask (4 bit) (rw) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (4 bit) (ro) | /
+ 0x00920960 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO0
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | snaph (16 bit) (rw) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ TIMER0 | snapl (16 bit) (rw) | |
+ [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
+ | periodh (16 bit) (rw) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | periodl (16 bit) (rw) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | control (4 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | status (2 bit) (rw) | /
+ 0x00920940 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER0
+ | | \
+ : gap : > (space for UART1)
+ | | /
+ 0x00920920 ---32-----------16|15------------0-
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ UART0 | (unused) | > 0x00000020
+ [2] + 0x10 |- - - - - - - - - - - - - - - -| |
+ | control (10 bit) (rw) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | status (10 bit) (rw) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | txdata (8 bit) (wo) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | rxdata (8 bit) (ro) | /
+ 0x00920900 ---32-----------16|15------------0- CFG_NIOS_CPU_UART0
+
+- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - -
+
+ 0x00920900 -----------------------------------
+ | | \
+ : (real size : |
+ OCI Debug : and content : > CFG_NIOS_CPU_OCI_SIZE
+ : unknown) : | = 0x00000100
+ | | /
+ 0x00920800 ----------------------------------- CFG_NIOS_CPU_OCI_BASE
+
+- - - - - - - - - - - on chip memory 2 - - - - - - - - - - -
+
+ 0x00920800 ---32-----------16|15------------0-
+ | : | \
+ | : | |
+ GERMS | : | > CFG_NIOS_CPU_ROM_SIZE
+ | : | | = 0x00000800
+ | : | /
+ 0x00920000 |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
+ 0x00920000 ---32-----------16|15------------0- CFG_NIOS_CPU_ROM_BASE
+
+- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
+
+ 0x00920000 ---32-----------16|15------------0-
+ | gap | \
+ 0x00910310 --+-------------------------------| |
+ | | |
+ | register bank (size = 0x10) | |
+ | +--------.---.---.--- | |
+ | | bank 0 \ 1 \ 2 \ 3 \ | |
+ | |---------------------------+ | |
+ LAN91C111 | | BANK | RESERVED | | |
+ | |- - - - - - -|- - - - - - -| | > na_lan91c111_size
+ | | RPCR | MIR | | | = 0x00010000
+ | |- - - - - - -|- - - - - - -| | |
+ | | COUNTER | RCR | | |
+ | |- - - - - - -|- - - - - - -| | |
+ | | EPH STATUS | TCR | | |
+ | +---------------------------+ | |
+ 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
+ | gap | /
+ 0x00910000 ---32-----------16|15------------0- CFG_NIOS_CPU_LAN0_BASE
+
+- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
+
+ 0x00910000 ---32-----------16|15------------0-
+ | : | \
+ | : | |
+ onchip RAM | : | > CFG_NIOS_CPU_RAM_SIZE
+ | : | | = 0x00010000
+ | : | /
+ 0x00900000 ---32-----------16|15------------0- CFG_NIOS_CPU_RAM_BASE
+
+- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - -
+
+ 0x00900000 ---32-----------16|15------------0-
+ 0x00900000 --+32-----------16|15------------0+
+ | . | \ \
+ | . | | |
+ | . | | > CFG_NIOS_CPU_VEC_SIZE
+ | . | | | = 0x00000100
+ | . | | /
+ 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE
+ 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_STACK
+ | . | | \
+ | . | | |
+ | . | | > stack area
+ | . | | |
+ | . | | V
+ | . | |
+ SRAM | . | > CFG_NIOS_CPU_SRAM_SIZE
+ | . | | = 0x00100000
+ | | /
+ 0x00800000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE
+ 0x00800000 ---8-------------4|3-------------0-
+ | sector 127 | \
+ + 0x7f0000 |- - - - - - - - - - - - - - - -| |
+ | : | |
+ Flash |- - - - : - - - -| > CFG_NIOS_CPU_FLASH_SIZE
+ | sector 1 : | | = 0x00800000
+ + 0x010000 |- - - - - - - - - - - - - - - -| |
+ | sector 0 (size = 0x10000) | /
+ 0x00000000 ---8-------------4|3-------------0- CFG_NIOS_CPU_FLASH_BASE
+
+
+===============================================================================
+ F L A S H M E M O R Y A L L O C A T I O N
+===============================================================================
+
+ 0x00800000 ---8-------------4|3-------------0-
+ | : | \
+ SAFE | : | > 1 MByte
+ FPGA conf. | : | / (NOT usable by software)
+ 0x00700000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ USER | : | > 1 MByte
+ FPGA conf. | : | / (NOT usable by software)
+ 0x00600000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ | : | |
+ WEB pages | : | > 2 MByte
+ | : | | (provisory usable)
+ | : | /
+ 0x00400000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ | : | |
+ | : | |
+ | : | > 4 MByte free for use
+ | : | |
+ 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
+ | : | /
+ 0x00000000 ---8-------------4|3-------------0-
+
+
+===============================================================================
+ R E F E R E N C E S
+===============================================================================
+[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf
+[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
+[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
+[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
+[5] http://www.opencores.org/projects/ata/
+ http://www.t13.org/index.html
+
+
+===============================================================================
+Stephan Linz <linz@li-pro.net>
--- /dev/null
+
+TODO: specify IDE i/f
+ specify OCI
+
+
+===============================================================================
+ C P U , M E M O R Y , I N / O U T C O M P O N E N T S
+===============================================================================
+see also [1]-[5]
+
+CPU: "standard_32"
+ 32 bit NIOS for 50 MHz
+ 256 Byte for register file (15 levels)
+ 4 KByte instruction cache (4 bytes in each cache line)
+ 4 KByte data cache (4 bytes in each cache line)
+ 2 KByte On Chip ROM with GERMS boot monitor
+ 64 KByte On Chip RAM
+ MSTEP multiplier
+ no Debug Core
+ On Chip Instrumentation (OCI) enabled
+
+ U-Boot CFG: CFG_NIOS_CPU_CLK = 50000000
+ CFG_NIOS_CPU_ICACHE = 4096
+ CFG_NIOS_CPU_DCACHE = 4096
+ CFG_NIOS_CPU_REG_NUMS = 256
+ CFG_NIOS_CPU_MUL = 0
+ CFG_NIOS_CPU_MSTEP = 1
+ CFG_NIOS_CPU_DBG_CORE = 0
+
+OCI: (TODO)
+
+IRQ: Nr. | used by
+ ------+--------------------------------------------------------
+ 16 | TIMER0 | CFG_NIOS_CPU_TIMER0_IRQ = 16
+ 25 | UART0 | CFG_NIOS_CPU_UART0_IRQ = 25
+ 30 | LAN91C111 | CFG_NIOS_CPU_LAN0_IRQ = 30
+ 35 | PIO5 | CFG_NIOS_CPU_PIO5_IRQ = 35
+ 40 | PIO0 | CFG_NIOS_CPU_PIO0_IRQ = 40
+ 50 | TIMER1 | CFG_NIOS_CPU_TIMER1_IRQ = 50
+
+MEMORY: 8 MByte Flash
+ 1 MByte SRAM
+ 16 MByte SDRAM
+
+Timer: TIMER0: high priority programmable timer (IRQ16)
+ TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
+
+ U-Boot CFG: CFG_NIOS_CPU_TICK_TIMER = 1
+ CFG_NIOS_CPU_USER_TIMER = 0
+
+PIO: Nr. | description
+ ------+--------------------------------------------------------
+ PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40)
+ PIO1 | LCD: 11 in/outputs for ASCII LCD
+ PIO2 | LED: 8 outputs for user LEDs
+ PIO3 | SEVENSEG: 16 outputs for user seven segment display
+ PIO4 | RECONF: 1 in/output for . . . . . . . . . . . .
+ PIO5 | CFPRESENT: 1 input for CF present event (IRQ35)
+ PIO6 | CFPOWER: 1 output to controll CF power supply
+ PIO7 | CFATASEL: 1 output to controll CF ATA card select
+
+ U-Boot CFG: CFG_NIOS_CPU_BUTTON_PIO = 0
+ CFG_NIOS_CPU_LCD_PIO = 1
+ CFG_NIOS_CPU_LED_PIO = 2
+ CFG_NIOS_CPU_SEVENSEG_PIO = 3
+ CFG_NIOS_CPU_RECONF_PIO = 4
+ CFG_NIOS_CPU_CFPRESENT_PIO = 5
+ CFG_NIOS_CPU_CFPOWER_PIO = 6
+ CFG_NIOS_CPU_CFATASEL_PIO = 7
+
+UART: UART0: fixed baudrate of 115200, fixed protocol 8N1,
+ without handshake RTS/CTS (IRQ25)
+
+LAN: SMsC LAN91C111 with:
+ - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
+ - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
+
+IDE: (TODO)
+
+
+===============================================================================
+ M E M O R Y M A P
+===============================================================================
+
+- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - -
+
+ 0x02000000 ---32-----------16|15------------0-
+ | : | \
+ | : | |
+ SDRAM | : | > CFG_NIOS_CPU_SRAM_SIZE
+ | : | | = 0x01000000
+ | : | /
+ 0x01000000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE
+ | |
+ : gap :
+ : :
+
+- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
+
+ : :
+ : gap :
+ | |
+ 0x00920a80 ---32-----------16|15------------0-
+ | | | \
+ : (real size : : |
+ IDE i/f : and content : : > 0x00000080
+ [5] : unknown) : : |
+ | | | /
+ 0x00920a00 ---32-----------16|15------------0- CFG_NIOS_CPU_IDE0
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ TIMER1 | (unused) | |
+ [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
+ | (unused) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | control (1 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | status (2 bit) (rw) | /
+ 0x009209e0 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER1
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO7 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (wo) | /
+ 0x009209d0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO7
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO6 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (wo) | /
+ 0x009209c0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO6
+ | edgecapture (1 bit) (rw) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO5 | interruptmask (1 bit) (rw) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (ro) | /
+ 0x009209b0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO5
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO4 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | direction (1 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (rw) | /
+ 0x009209a0 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO4
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO3 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (16 bit) (wo) | /
+ 0x00920990 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO3
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO2 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (8 bit) (wo) | /
+ 0x00920980 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO2
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO1 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | direction (11 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (11 bit) (rw) | /
+ 0x00920970 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO1
+ | edgecapture (4 bit) (rw) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO0 | interruptmask (4 bit) (rw) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (4 bit) (ro) | /
+ 0x00920960 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO0
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | snaph (16 bit) (rw) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ TIMER0 | snapl (16 bit) (rw) | |
+ [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
+ | periodh (16 bit) (rw) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | periodl (16 bit) (rw) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | control (4 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | status (2 bit) (rw) | /
+ 0x00920940 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER0
+ | | \
+ : gap : > (space for UART1)
+ | | /
+ 0x00920920 ---32-----------16|15------------0-
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ UART0 | (unused) | > 0x00000020
+ [2] + 0x10 |- - - - - - - - - - - - - - - -| |
+ | control (10 bit) (rw) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | status (10 bit) (rw) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | txdata (8 bit) (wo) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | rxdata (8 bit) (ro) | /
+ 0x00920900 ---32-----------16|15------------0- CFG_NIOS_CPU_UART0
+
+- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - -
+
+ 0x00920900 -----------------------------------
+ | | \
+ : (real size : |
+ OCI Debug : and content : > CFG_NIOS_CPU_OCI_SIZE
+ : unknown) : | = 0x00000100
+ | | /
+ 0x00920800 ----------------------------------- CFG_NIOS_CPU_OCI_BASE
+
+- - - - - - - - - - - on chip memory 2 - - - - - - - - - - -
+
+ 0x00920800 ---32-----------16|15------------0-
+ | : | \
+ | : | |
+ GERMS | : | > CFG_NIOS_CPU_ROM_SIZE
+ | : | | = 0x00000800
+ | : | /
+ 0x00920000 |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
+ 0x00920000 ---32-----------16|15------------0- CFG_NIOS_CPU_ROM_BASE
+
+- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
+
+ 0x00920000 ---32-----------16|15------------0-
+ | gap | \
+ 0x00910310 --+-------------------------------| |
+ | | |
+ | register bank (size = 0x10) | |
+ | +--------.---.---.--- | |
+ | | bank 0 \ 1 \ 2 \ 3 \ | |
+ | |---------------------------+ | |
+ LAN91C111 | | BANK | RESERVED | | |
+ | |- - - - - - -|- - - - - - -| | > na_lan91c111_size
+ | | RPCR | MIR | | | = 0x00010000
+ | |- - - - - - -|- - - - - - -| | |
+ | | COUNTER | RCR | | |
+ | |- - - - - - -|- - - - - - -| | |
+ | | EPH STATUS | TCR | | |
+ | +---------------------------+ | |
+ 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
+ | gap | /
+ 0x00910000 ---32-----------16|15------------0- CFG_NIOS_CPU_LAN0_BASE
+
+- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
+
+ 0x00910000 ---32-----------16|15------------0-
+ | : | \
+ | : | |
+ onchip RAM | : | > CFG_NIOS_CPU_RAM_SIZE
+ | : | | = 0x00010000
+ | : | /
+ 0x00900000 ---32-----------16|15------------0- CFG_NIOS_CPU_RAM_BASE
+
+- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - -
+
+ 0x00900000 ---32-----------16|15------------0-
+ 0x00900000 --+32-----------16|15------------0+
+ | . | \ \
+ | . | | |
+ | . | | > CFG_NIOS_CPU_VEC_SIZE
+ | . | | | = 0x00000100
+ | . | | /
+ 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE
+ 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_STACK
+ | . | | \
+ | . | | |
+ | . | | > stack area
+ | . | | |
+ | . | | V
+ | . | |
+ SRAM | . | > CFG_NIOS_CPU_SRAM_SIZE
+ | . | | = 0x00100000
+ | | /
+ 0x00800000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE
+ 0x00800000 ---8-------------4|3-------------0-
+ | sector 127 | \
+ + 0x7f0000 |- - - - - - - - - - - - - - - -| |
+ | : | |
+ Flash |- - - - : - - - -| > CFG_NIOS_CPU_FLASH_SIZE
+ | sector 1 : | | = 0x00800000
+ + 0x010000 |- - - - - - - - - - - - - - - -| |
+ | sector 0 (size = 0x10000) | /
+ 0x00000000 ---8-------------4|3-------------0- CFG_NIOS_CPU_FLASH_BASE
+
+
+===============================================================================
+ F L A S H M E M O R Y A L L O C A T I O N
+===============================================================================
+
+ 0x00800000 ---8-------------4|3-------------0-
+ | : | \
+ | : | |
+ SAFE | : | > 2 MByte
+ FPGA conf. | : | | (NOT usable by software)
+ | : | /
+ 0x00600000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ | : | |
+ USER | : | > 2 MByte
+ FPGA conf. | : | | (NOT usable by software)
+ | : | /
+ 0x00400000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ | : | |
+ WEB pages | : | > 2 MByte
+ | : | | (provisory usable)
+ | : | /
+ 0x00200000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ | : | |
+ | : | > 2 MByte free for use
+ 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
+ | : | /
+ 0x00000000 ---8-------------4|3-------------0-
+
+
+===============================================================================
+ R E F E R E N C E S
+===============================================================================
+[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s40.pdf
+[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
+[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
+[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
+[5] http://www.opencores.org/projects/ata/
+ http://www.t13.org/index.html
+
+
+===============================================================================
+Stephan Linz <linz@li-pro.net>
--- /dev/null
+
+===============================================================================
+ C P U , M E M O R Y , I N / O U T C O M P O N E N T S
+===============================================================================
+see also [1]-[4]
+
+CPU: "standard_32"
+ 32 bit NIOS for 33.333 MHz (nasys_clock_freq = 33333000)
+ 256 Byte for register file (15 levels)
+ no instruction cache
+ no data cache
+ 1 KByte On Chip ROM with GERMS boot monitor
+ no On Chip RAM
+ MSTEP multiplier
+ no Debug Core
+ no On Chip Instrumentation (OCI) enabled
+
+ U-Boot CFG: CFG_NIOS_CPU_CLK = 50000000
+ CFG_NIOS_CPU_ICACHE = 0
+ CFG_NIOS_CPU_DCACHE = 0
+ CFG_NIOS_CPU_REG_NUMS = 256
+ CFG_NIOS_CPU_MUL = 0
+ CFG_NIOS_CPU_MSTEP = 1
+ CFG_NIOS_CPU_DBG_CORE = 0
+
+IRQ: Nr. | used by
+ ------+--------------------------------------------------------
+ 25 | TIMER0 | CFG_NIOS_CPU_TIMER0_IRQ = 25
+ 26 | UART0 | CFG_NIOS_CPU_UART0_IRQ = 26
+ 27 | PIO2 | CFG_NIOS_CPU_PIO2_IRQ = 27
+ 28 | UART1 | CFG_NIOS_CPU_UART1_IRQ = 28 (debug)
+
+MEMORY: 1 MByte Flash
+ 256 KByte SRAM
+ (SDRAM with standard SODIMM only)
+
+Timer: TIMER0: high priority programmable timer (IRQ25)
+
+ U-Boot CFG: CFG_NIOS_CPU_TICK_TIMER = 0
+
+PIO: Nr. | description
+ ------+--------------------------------------------------------
+ PIO0 | SEVENSEG: 16 outputs for user seven segment display
+ PIO1 | LED: 8 outputs for user LEDs
+ PIO2 | BUTTON: 4 inputs for user push buttons (IRQ27)
+ PIO3 | LCD: 11 in/outputs for ASCII LCD
+
+ U-Boot CFG: CFG_NIOS_CPU_SEVENSEG_PIO = 0
+ CFG_NIOS_CPU_LED_PIO = 1
+ CFG_NIOS_CPU_BUTTON_PIO = 2
+ CFG_NIOS_CPU_LCD_PIO = 3
+
+UART: UART0: fixed baudrate of 115200, fixed protocol 8N2,
+ without handshake RTS/CTS (IRQ26)
+ UART1: fixed baudrate of 115200, fixed protocol 8N1,
+ without handshake RTS/CTS (IRQ28)
+
+
+===============================================================================
+ M E M O R Y M A P
+===============================================================================
+
+- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - -
+
+ 0x00200000 ---15------------8|7-------------0-
+ | sector 18 | \
+ + 0x0f0000 |- - - - - - - - - - - - - - - -| |
+ | : | |
+ Flash |- - - - : - - - -| |
+ | sector 5 : | |
+ + 0x020000 |- - - - - - - - -| |
+ | sector 4 (size = 0x10000) | |
+ + 0x010000 |- - - - - - - - - - - - - - - -| > CFG_NIOS_CPU_FLASH_SIZE
+ | sector 3 (size = 0x08000) | | = 0x00100000
+ + 0x008000 |- - - - - - - - - - - - - - - -| |
+ | sector 2 (size = 0x02000) | |
+ + 0x006000 |- - - - - - - - - - - - - - - -| |
+ | sector 1 (size = 0x02000) | |
+ + 0x004000 |- - - - - - - - - - - - - - - -| |
+ | sector 0 (size = 0x04000) | /
+ 0x00100000 ---15------------8|7-------------0- CFG_NIOS_CPU_FLASH_BASE
+ | |
+ : gap :
+ | |
+ 0x00080000 ---32-----------16|15------------0-
+ 0x00080000 --+32-----------16|15------------0+
+ | . | \ \
+ | . | | |
+ | . | | > CFG_NIOS_CPU_VEC_SIZE
+ | . | | | = 0x00000100
+ | . | | /
+ 0x0007ff00 |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE
+ 0x0007ff00 |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_STACK
+ | . | | \
+ | . | | |
+ | . | | > stack area
+ | . | | |
+ | . | | V
+ | . | |
+ SRAM | . | > CFG_NIOS_CPU_SRAM_SIZE
+ | . | | = 0x00040000
+ | | /
+ 0x00040000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE
+ | |
+ : gap :
+ : :
+
+- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
+
+ : :
+ : gap :
+ | |
+ 0x00000400 ---32-----------16|15------------0-
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ UART0 | (unused) | > 0x00000020
+ [2] + 0x10 |- - - - - - - - - - - - - - - -| |
+ | control (10 bit) (rw) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | status (10 bit) (rw) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | txdata (8 bit) (wo) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | rxdata (8 bit) (ro) | /
+ 0x000004c0 ---32-----------16|15------------0- CFG_NIOS_CPU_UART1
+ | |
+ : gap :
+ | |
+ 0x00000490 ---32-----------16|15------------0-
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO3 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | direction (11 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (11 bit) (rw) | /
+ 0x00000480 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO3
+ | edgecapture (12 bit) (rw) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO2 | interruptmask (12 bit) (rw) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (12 bit) (ro) | /
+ 0x00000470 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO2
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO1 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | direction (2 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (2 bit) (rw) | /
+ 0x00000460 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO1
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | snaph (16 bit) (rw) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ TIMER0 | snapl (16 bit) (rw) | |
+ [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
+ | periodh (16 bit) (rw) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | periodl (16 bit) (rw) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | control (4 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | status (2 bit) (rw) | /
+ 0x00000440 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER0
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO0 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (16 bit) (wo) | /
+ 0x00000420 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO0
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ UART0 | (unused) | > 0x00000020
+ [2] + 0x10 |- - - - - - - - - - - - - - - -| |
+ | control (10 bit) (rw) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | status (10 bit) (rw) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | txdata (8 bit) (wo) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | rxdata (8 bit) (ro) | /
+ 0x00000400 ---32-----------16|15------------0- CFG_NIOS_CPU_UART0
+
+- - - - - - - - - - - on chip memory - - - - - - - - - - -
+
+ 0x00000400 ---32-----------16|15------------0-
+ | : | \
+ | : | |
+ GERMS | : | > na_boot_monitor_rom_size
+ | : | | = 0x00000400
+ | : | /
+ 0x00000000 |- - - - - - - - - - - - - - - -+- - nasys_reset_address
+ 0x00000000 ---32-----------16|15------------0- na_boot_monitor_rom
+
+
+===============================================================================
+ F L A S H M E M O R Y A L L O C A T I O N
+===============================================================================
+
+ 0x00200000 ---15------------8|7-------------0-
+ | : | \
+ SAFE | : | > 256 KByte
+ FPGA conf. | : | / (NOT usable by software)
+ 0x001c0000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ USER | : | > 256 KByte
+ FPGA conf. | : | / (NOT usable by software)
+ 0x00180000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ | : | |
+ | : | > 512 KByte free for use
+ 0x00140000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
+ | : | /
+ 0x00100000 ---15------------8|7-------------0-
+
+
+===============================================================================
+ R E F E R E N C E S
+===============================================================================
+[1] http://www.altera.com/literature/ds/ds_nios_board_apex_20k200e.pdf
+[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
+[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
+[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
+
+
+===============================================================================
+Stephan Linz <linz@li-pro.net>
U-Boot for Nios-32
- Last Update: October 15, 2003
+ Last Update: November 30, 2003
====================================================================
This file contains information regarding U-Boot and the Altera
Nios CPU. For information regarding U-Boot and the Nios Development
-Kit, Cyclone Edition (DK-1C20), see doc/README.dk1c20.
+Kits see:
+
+ * Cyclone Edition (DK-1C20), see doc/README.dk1c20
+ * Stratix Edition (DK-1S10), see doc/README.dk1s10 (TODO)
+ * Stratix Edition (DK-1S40), see doc/README.dk1s40 (TODO)
+ * Stratix Edition (DK-20K200), see doc/README.dk20k200 (TODO)
+
+For informations regarding Nios Development Kit hardware overview
+and the NIOS CPU standard configuration of all known boards made by
+Altera see:
+
+ * Development Kit (DK) hardware overview, see doc/README.nios_DK
+ * NIOS CPU standard_32 at DK-1C20, see doc/README.dk1c20_std32
+ * NIOS CPU standard_32 at DK-1S10, see doc/README.dk1s10_std32
+ * NIOS CPU standard_32 at DK-1S40, see doc/README.dk1s40_std32
+ * NIOS CPU standard_32 at DK-20K200, see doc/README.dk20k200_std32
For those interested in contributing ... see HELP WANTED below.
2.1 Nios-specific Options/Settings
-----------------------------------
All configuration options/settings that are specific to Nios begin
-with "CONFIG_NIOS_" or "CFG_NIOS_". The following is a list of
-currently defined Nios-specific options/parameters. If any options
-are related to Standard-32 Nios SDK excalibur.h definitions, the
-related definition follows the description).
+with "CONFIG_NIOS_", "CFG_NIOS_", or "CFG_NIOS_CPU_".
+
+The configuration follows a two-stage process. In the first stage
+the NIOS CPU core will defined like defined in Alteras SOPC Builder.
+At this point we use the "CFG_NIOS_CPU_" defines exclusively. For
+more informations about all the definitions you have to setup see
+into current board configurations and doc/README.nios_CFG_NIOS_CPU.
+In second stage we bring the NIOS CPU configuration in relation to
+U-Boot configuration options/settings. The following is a list of
+currently defined Nios-specific options/parameters used inside of
+U-Boot. If any options are related to Standard-32 Nios SDK
+excalibur.h definitions, the related definition follows the
+description).
CONFIG_NIOS -- defined for all Nios-32 boards.
CFG_NIOS_CONSOLE -- the base address of the console UART.
- (standard-32: na_uart1_base).
+ (standard-32: nasys_uart_0 resp. na_uart1_base).
CFG_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud
parameter is set to '1'.
CFG_NIOS_TMRBASE -- the base address of the timer used to support
xxx_timer routines (e.g. set_timer(), get_timer(), etc.).
- (standard-32: na_lo_priority_timer2_base).
+ (standard-32: nasys_timer_1 resp. na_lo_priority_timer2_base).
CFG_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to
- the timer. (standard-32: na_low_priority_timer2_irq).
+ the timer. (standard-32: nasys_timer_1_irq resp.
+ na_low_priority_timer2_irq).
CFG_NIOS_TMRMS -- the period of the timer in milliseconds.
but does not appear in the programmer's manual.
-4. BRAIN DAMAGE
+4. BOOT PROCESS
+---------------
+
+4.1 Boot process over GERMS
+---------------------------
+When the NIOS CPU catch a reset signal it will begin to be running
+code from CFG_NIOS_CPU_RST_VECT. Normally at this place it will
+find the GERMS monitor. That's the case for the generic NIOS CPU
+configuration "standard_32". When the GERMS monitor starts running,
+it performs important system initializations and then looks for
+executable code in flash, using the following steps:
+
+ 1. Examining the two bytes at CFG_NIOS_CPU_FLASH_BASE + 0x04000C.
+ 2. Examining the button 0 on the PIO CFG_NIOS_CPU_BUTTON_PIO.
+ 3. If the button is not pressed and the two bytes contain 'N'
+ and 'i', the monitor executes a CALL to location
+ CFG_NIOS_CPU_FLASH_BASE + 0x040000.
+ 4. If the code is not executed in step 3 or the code returns,
+ then prints an 8-digit version number to STDOUT and waits for
+ user commands from STDIN.
+
+In normal case, for "standard_32", STDIN and STDOUT are the first
+serial port.
+
+4.2 Return to GERMS command line
+--------------------------------
+During the boot process, the GERMS monitor checks for the existence
+of application software in flash memory. If found, the processor
+immediately executes the code. To return program execution to the
+GERMS monitor (that is, avoid running code stored in flash memory):
+
+ 1. Hold down CFG_NIOS_CPU_BUTTON_PIO, button number 0.
+ 2. Press then release the CPU reset button.
+ 3. Release CFG_NIOS_CPU_BUTTON_PIO, button number 0.
+
+
+5. BRAIN DAMAGE
----------------
This section describes some of the unfortunate and avoidable aspects
of working with the Nios CPU ... and some things you can do to
reduce your pain.
-4.1 GERMS doesn't work with Hyperterminal
+5.1 GERMS doesn't work with Hyperterminal
------------------------------------------
GERMS doesn't do CR/LF mapping that is compatible with Hyperterminal
(or minicom) -- geez. Regardless of you opion of Hyperterminal, this
sad design decision is remedied by using U-Boot.
-4.2 cygwin Incompatibility
+5.2 cygwin Incompatibility
---------------------------
The version of cygwin distributed with the nios GNUPro toolchain is
out-of-date and incompatible with the latest cygwin distributions.
The solution ... well, you can wait for Altera ... or build as
set of tools for linux.
-4.3 No native gcc
+5.3 No native gcc
------------------
I'm not sure how this one slipped through the cracks ... but it is
a real pain. Basically, if you want to build anything for the native
The solution ... same as above. Just download the gcc source from
Altera and build up a set of cross tools for your favorite linux
-distro.
+distro. Anybody who wants to use an already precompiled NIOS cross
+toolchain can it found in the CDK4NIOS project hosted by Source
+Forge at http://cdk4nios.sourceforge.net.
-4.4 Can't build default U-Boot
+5.4 Can't build default U-Boot
-------------------------------
By default, when you build U-Boot you will be building some native
tools along with the target elf, bin, and srec files. Without a
BTW, thats a 'zero' ... not the letter 'O'.
-5. HELP WANTED
+6. HELP WANTED
---------------
There are plenty of areas where help is needed. Here's are some ideas
--Scott
<smcnutt@psyent.com>
+
+--Stephan
+<linz@li-pro.net>
--- /dev/null
+
+===============================================================================
+ C F G _ N I O S _ C P U _ * v s . N I O S S D K
+===============================================================================
+
+When ever you have to make a new NIOS CPU configuration you can use this table
+as a reference list to the original NIOS SDK symbols made by Alteras SOPC
+Builder. Look into excalibur.h and excalibur.s in your SDK path cpu_sdk/inc.
+Symbols beginning with a '[ptf]:' are coming from your SOPC sytem description
+(PTF file) in sections WIZARD_SCRIPT_ARGUMENTS or SYSTEM_BUILDER_INFO.
+
+C O R E N I O S S D K [1],[7]
+-------------------------------------------------------------------------------
+CFG_NIOS_CPU_CLK nasys_clock_freq
+CFG_NIOS_CPU_ICACHE nasys_icache_size
+CFG_NIOS_CPU_DCACHE nasys_dcache_size
+CFG_NIOS_CPU_REG_NUMS nasys_nios_num_regs
+CFG_NIOS_CPU_MUL __nios_use_multiply__
+CFG_NIOS_CPU_MSTEP __nios_use_mstep__
+CFG_NIOS_CPU_STACK nasys_stack_top
+CFG_NIOS_CPU_VEC_BASE nasys_vector_table
+CFG_NIOS_CPU_VEC_SIZE nasys_vector_table_size
+CFG_NIOS_CPU_VEC_NUMS
+CFG_NIOS_CPU_RST_VECT nasys_reset_address
+CFG_NIOS_CPU_DBG_CORE nasys_debug_core
+CFG_NIOS_CPU_RAM_BASE na_onchip_ram_64_kbytes
+CFG_NIOS_CPU_RAM_SIZE na_onchip_ram_64_kbytes_size
+CFG_NIOS_CPU_ROM_BASE na_boot_monitor_rom
+CFG_NIOS_CPU_ROM_SIZE na_boot_monitor_rom_size
+CFG_NIOS_CPU_OCI_BASE nasys_oci_core
+CFG_NIOS_CPU_OCI_SIZE
+CFG_NIOS_CPU_SRAM_BASE na_ext_ram nasys_program_mem
+ nasys_data_mem
+CFG_NIOS_CPU_SRAM_SIZE na_ext_ram_size nasys_program_mem_size
+ nasys_data_mem_size
+CFG_NIOS_CPU_SDRAM_BASE na_sdram
+CFG_NIOS_CPU_SDRAM_SIZE na_sdram_size
+CFG_NIOS_CPU_FLASH_BASE na_ext_flash nasys_main_flash
+ nasys_am29lv065d_flash_0
+ nasys_flash_0
+CFG_NIOS_CPU_FLASH_SIZE na_ext_flash_size nasys_main_flash_size
+
+T I M E R N I O S S D K [3]
+-------------------------------------------------------------------------------
+CFG_NIOS_CPU_TIMER_NUMS nasys_timer_count
+CFG_NIOS_CPU_TIMER[0-9] nasys_timer_[0-9]
+CFG_NIOS_CPU_TIMER[0-9]_IRQ nasys_timer_[0-9]_irq
+CFG_NIOS_CPU_TIMER[0-9]_PER [ptf]:period
+ [ptf]:period_units
+ [ptf]:mult
+CFG_NIOS_CPU_TIMER[0-9]_AR [ptf]:always_run
+CFG_NIOS_CPU_TIMER[0-9]_FP [ptf]:fixed_period
+CFG_NIOS_CPU_TIMER[0-9]_SS [ptf]:snapshot
+
+U A R T N I O S S D K [2]
+-------------------------------------------------------------------------------
+CFG_NIOS_CPU_UART_NUMS nasys_uart_count
+CFG_NIOS_CPU_UART[0-9] nasys_uart_[0-9]
+CFG_NIOS_CPU_UART[0-9]_IRQ nasys_uart_[0-9]_irq
+CFG_NIOS_CPU_UART[0-9]_BR [ptf]:baud
+CFG_NIOS_CPU_UART[0-9]_DB [ptf]:data_bits
+CFG_NIOS_CPU_UART[0-9]_SB [ptf]:stop_bits
+CFG_NIOS_CPU_UART[0-9]_PA [ptf]:parity
+CFG_NIOS_CPU_UART[0-9]_HS [ptf]:use_cts_rts
+CFG_NIOS_CPU_UART[0-9]_EOP [ptf]:use_eop_register
+
+P I O N I O S S D K [4]
+-------------------------------------------------------------------------------
+CFG_NIOS_CPU_PIO_NUMS nasys_pio_count
+CFG_NIOS_CPU_PIO[0-9] nasys_pio_[0-9]
+CFG_NIOS_CPU_PIO[0-9]_IRQ nasys_pio_[0-9]_irq
+CFG_NIOS_CPU_PIO[0-9]_BITS [ptf]:Data_Width
+CFG_NIOS_CPU_PIO[0-9]_TYPE [ptf]:has_tri
+ [ptf]:has_out
+ [ptf]:has_in
+CFG_NIOS_CPU_PIO[0-9]_CAP [ptf]:capture
+CFG_NIOS_CPU_PIO[0-9]_EDGE [ptf]:edge_type
+CFG_NIOS_CPU_PIO[0-9]_ITYPE [ptf]:irq_type
+
+S P I N I O S S D K [6]
+-------------------------------------------------------------------------------
+CFG_NIOS_CPU_SPI_NUMS nasys_spi_count
+CFG_NIOS_CPU_SPI[0-9] nasys_spi_[0-9]
+CFG_NIOS_CPU_SPI[0-9]_IRQ nasys_spi_[0-9]_irq
+CFG_NIOS_CPU_SPI[0-9]_BITS [ptf]:databits
+CFG_NIOS_CPU_SPI[0-9]_MA [ptf]:ismaster
+CFG_NIOS_CPU_SPI[0-9]_SLN [ptf]:numslaves
+CFG_NIOS_CPU_SPI[0-9]_TCLK [ptf]:targetclock
+CFG_NIOS_CPU_SPI[0-9]_TDELAY [ptf]:targetdelay
+CFG_NIOS_CPU_SPI[0-9]_* [ptf]:*
+
+I D E N I O S S D K
+-------------------------------------------------------------------------------
+CFG_NIOS_CPU_IDE_NUMS nasys_usersocket_count
+CFG_NIOS_CPU_IDE[0-9] nasys_usersocket_[0-9]
+
+A S M I N I O S S D K [5]
+-------------------------------------------------------------------------------
+CFG_NIOS_CPU_ASMI_NUMS nasys_asmi_count
+CFG_NIOS_CPU_ASMI[0-9] nasys_asmi_[0-9]
+CFG_NIOS_CPU_ASMI[0-9]_IRQ nasys_asmi_[0-9]_irq
+
+E t h e r n e t ( L A N ) N I O S S D K
+-------------------------------------------------------------------------------
+CFG_NIOS_CPU_LAN_NUMS
+CFG_NIOS_CPU_LAN[0-9]_BASE na_lan91c111
+CFG_NIOS_CPU_LAN[0-9]_OFFS LAN91C111_REGISTERS_OFFSET
+CFG_NIOS_CPU_LAN[0-9]_IRQ na_lan91c111_irq
+CFG_NIOS_CPU_LAN[0-9]_BUSW LAN91C111_DATA_BUS_WIDTH
+CFG_NIOS_CPU_LAN[0-9]_TYPE
+
+s y s t e m c o m p o s i n g N I O S S D K
+-------------------------------------------------------------------------------
+CFG_NIOS_CPU_TICK_TIMER (na_low_priority_timer2)
+CFG_NIOS_CPU_USER_TIMER (na_timer1)
+CFG_NIOS_CPU_BUTTON_PIO (na_button_pio)
+CFG_NIOS_CPU_LCD_PIO (na_lcd_pio)
+CFG_NIOS_CPU_LED_PIO (na_led_pio)
+CFG_NIOS_CPU_SEVENSEG_PIO (na_seven_seg_pio)
+CFG_NIOS_CPU_RECONF_PIO (na_reconfig_request_pio)
+CFG_NIOS_CPU_CFPRESENT_PIO (na_cf_present_pio)
+CFG_NIOS_CPU_CFPOWER_PIO (na_cf_power_pio)
+CFG_NIOS_CPU_CFATASEL_PIO (na_cf_ata_select_pio)
+CFG_NIOS_CPU_USER_SPI (na_spi)
+
+
+===============================================================================
+ R E F E R E N C E S
+===============================================================================
+[1] http://www.altera.com/literature/ds/ds_nioscpu.pdf
+[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
+[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
+[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
+[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf
+[6] http://www.altera.com/literature/ds/ds_nios_spi.pdf
+[7] http://www.altera.com/literature/ds/ds_legacy_sdram_ctrl.pdf
+
+
+===============================================================================
+Stephan Linz <linz@li-pro.net>
--- /dev/null
+
+===============================================================================
+ H A R D W A R E O V E R V I E W
+===============================================================================
+===============|===============|===============|===============|===============
+ | DK20K200 | DK1C20 | DK1S10 | DK1S40
+---------------|---------------|---------------|---------------|---------------
+ | | | |
+ Schem. Nr. | Nios Dev.Brd. | P06-08713-00 | P06-08468-01 | P06-09178-00
+ Rev. | pilot. | 01 | 01 | 00
+ Date | 2001/02/06 | 2003/02/20 | 2003/02/14 | 2003/05/14
+[1] | | | |
+===============|===============|===============|===============|===============
+ | | | |
+ FPGA | "APEX" | "Cyclon" | "Stratix" | "Stratix"
+ | EP20K200E | EP1C20 | EP1S10 | EP1S40
+ | | |
+ | (484 FBGA) | (400 FBGA) | (780 FBGA)
+[2],[3],[4] | | |
+---------------|---------------|---------------|---------------|---------------
+ | |
+ Clock (OSC) | 33.333 MHz | 50 MHz
+ | | (with ext. supply)
+ |
+ | PI49FCT3805
+[5] |
+---------------|---------------|---------------|---------------|---------------
+ | |
+ Flash | 1 MByte | 8 MByte
+ | |
+ | AM29LV800BB | AM29LV065DU120REI
+ | 8/16 bit bus | 8 bit bus
+ | 1 chip | 1 chip
+[6],[7] | |
+---------------|---------------|---------------|---------------|---------------
+ | | |
+ serial | no such | 4 MBits | no such
+ Flash | | |
+ | | EPCS4SI8 |
+[8] | | |
+---------------|---------------|---------------|---------------|---------------
+ | |
+ Compact | no such, as | see below: prototype adapter
+ Flash (CF) | module only |
+ | |
+---------------|---------------|---------------|---------------|---------------
+ | |
+ SRAM | 256 KByte | 1 MByte
+ | |
+ | IDT71V016S | IDT71V416S10PH
+ | 32 bit bus | 32 bit bus
+ | 2 chips | 2 chips
+ | interlaced | interlaced
+[9],[10] | |
+---------------|---------------|---------------|---------------|---------------
+ | |
+ SDRAM | SODIMM only | 16 MByte
+ | |
+ | | MT48LC4M32B2TG-7
+ | 64 bit bus | 32 bit bus
+ | | 1 chip
+[11] | |
+===============|===============|===============|===============|===============
+ | |
+ serial I/O | 1 RS232 | 2 RS232
+ | |
+ | LTC1386 | MAX3237CAI
+ | |
+ | port 1: | port 1:
+ | RxD / TxD, | RxD / TxD,
+ | RTS / CTS | RTS / CTS, DTR / DSR, DCD, RI
+ | |
+ | ! ! ! ! ! ! | port 2: | port 2:
+ | RTS/CTS can | RxD / TxD | RxD / TxD
+ | be RxD/TxD | | RTS / CTS, DTR / DSR
+ | of 2nd port | | DCD, RI
+[12],[13] | ! ! ! ! ! ! | |
+---------------|---------------|---------------|---------------|---------------
+ | |
+ Ethernet | no such, as | 1 10BaseT / 100BaseT
+ | module only |
+ | | LAN91C111-NE
+ | | 32 bit bus
+ | | no external EEPROM
+ | | LEDA# for link
+ | | LEDB# for Rx / Tx
+[14] | |
+===============|===============|===============|===============|===============
+ | |
+ user | 8 | no such
+ switches | SW[7..0] |
+ | |
+---------------|---------------|---------------|---------------|---------------
+ |
+ user push | 4
+ buttons | PB[3..0]
+ |
+---------------|---------------|---------------|---------------|---------------
+ | |
+ user LEDs | 2 | 8
+ | LED[1..0] | LED[7..0]
+ | |
+---------------|---------------|---------------|---------------|---------------
+ |
+ user seven | 2
+ segment | HEX[1..0][G..A,DP]
+ |
+===============|===============|===============|===============|===============
+ | |
+ 3.3V proto- | w/o level | no such -- only 5V
+ type adapter | shift buffer |
+ | |
+ | 40 I/O pins |
+ | 1 card sel. |
+ | 1 reset out. |
+ | 1 OSC clock |
+ | 1 CPU clock |
+ | 1 clock out. |
+ | |
+---------------|---------------|---------------|---------------|---------------
+ | |
+ 5V prototype | with level | 2 ports -- both card ports supplied with its
+ adapter | shift buffer | own level shift buffer
+ | |
+ | 40 I/O pins | port 1 & 2:
+ | 1 card sel. | 41 I/O pins
+ | 1 Vee ? ? ? | 1 card select
+ | 1 reset out. | 1 reset output (from dev/board)
+ | 1 OSC clock | 1 OSC clock (from dev/board)
+ | 1 CPU clock | 1 CPU clock (from dev/board)
+ | 1 clock inp. | 1 clock input (to dev/board)
+ | |
+ | | (special) port 1:
+ | | 1 CF select
+ | | 1 CF present
+ | | 1 CF ATA select
+ | | 1 CF power
+ | |
+ | | NOTE: Both card ports are prepared for raw
+ | | IDE working. You can connect such
+ | | devices directly to the 40 pin header.
+ | | The signal PDIAG (passed diagnostic)
+ | | is not connected to any I/O signal.
+ | | Card port 1 is hard wired to the on
+ | | board Copact Flash adapter together
+ | | with all other signals needed by CF
+ | | cards. Hot plug should be working too.
+[15],[16] | |
+===============|===============|===============|===============|===============
+ | |
+ config. CPLD | EPM7064 | EPM7128
+ | |
+ (alternative | decition by | decision by
+ FPGA conf.) | jumper | push button
+ | |
+ | FPGA config. | FPGA config. | FPGA config.
+ | from Flash | from Flash | from Flash
+ | only | and EPCS4 | only
+ | | |
+===============|===============|===============|===============|===============
+===============================================================================
+
+
+===============================================================================
+ R E F E R E N C E S
+===============================================================================
+[1] http://www.altera.com/literature/lit-nio.jsp
+[2] http://www.altera.com/literature/lit-apx.jsp
+[3] http://www.altera.com/literature/lit-cyc.jsp
+[4] http://www.altera.com/literature/lit-stx.jsp
+[5] http://www.pericom.com/pdf/datasheets/PI49FCT3805.pdf
+ http://www.pericom.com/products/clock/psempart.php?productID=PI49FCT3805
+[6] http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1532,00.html
+ http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/21490.pdf
+[7] http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1596,00.html
+ http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/23544b.pdf
+[8] http://www.altera.com/literature/lit-config.html
+ http://preview.altera.com/literature/ds/micron.pdf
+[9] http://www.idt.com/products/pages/Asynchronous_SRAMs-71V016SA.html
+[10] http://www.idt.com/products/pages/Asynchronous_SRAMs-71V416SL.html
+[11] http://www.micron.com/products/dram/sdram/part.aspx?part=MT48LC4M32B2TG-7
+[12] http://www.linear.com/prod/datasheet.html?datasheet=33
+ http://www.linear.com/pdf/1386fa.pdf
+[13] http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1068/ln/en
+ http://pdfserv.maxim-ic.com/en/ds/MAX3222-MAX3241.pdf
+[14] http://www.smsc.com/main/catalog/lan91c111.html
+[15] http://www.t13.org/index.html
+[16] http://www.compactflash.org/faqs/faq.htm
+
+
+===============================================================================
+Stephan Linz <linz@li-pro.net>
dataflash_info[i].Device.pages_size,
(unsigned int) dataflash_info[i].logical_address);
for (j=0; j< NB_DATAFLASH_AREA; j++) {
- printf ("Area %i:\t%08X to %08X %s\n", j,
+ printf ("Area %i:\t%08lX to %08lX %s\n", j,
dataflash_info[i].Device.area_list[j].start,
dataflash_info[i].Device.area_list[j].end,
(dataflash_info[i].Device.area_list[j].protected ==
#include <net.h>
#include <pci.h>
-#undef DEBUG
#undef DEBUG_SROM
#undef DEBUG_SROM2
#define SROM_HWADD 0x0014 /* Hardware Address offset in SROM */
#define SROM_RD 0x00004000 /* Read from Boot ROM */
-#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
-#define EE_WRITE_0 0x4801
-#define EE_WRITE_1 0x4805
-#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
+#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x4801
+#define EE_WRITE_1 0x4805
+#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
#define SROM_SR 0x00000800 /* Select Serial ROM when set */
#define DT_IN 0x00000004 /* Serial Data In */
static char rxRingSize;
static char txRingSize;
+#if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM)
static void sendto_srom(struct eth_device* dev, u_int command, u_long addr);
static int getfrom_srom(struct eth_device* dev, u_long addr);
-static int do_eeprom_cmd(struct eth_device *dev, u_long ioaddr, int cmd, int cmd_len);
-static int do_read_eeprom(struct eth_device *dev, u_long ioaddr, int location, int addr_len);
-static int read_srom(struct eth_device *dev, u_long ioaddr, int index);
+static int do_eeprom_cmd(struct eth_device *dev, u_long ioaddr,int cmd,int cmd_len);
+static int do_read_eeprom(struct eth_device *dev,u_long ioaddr,int location,int addr_len);
+#endif /* UPDATE_SROM || !CONFIG_TULIP_FIX_DAVICOM */
#ifdef UPDATE_SROM
static int write_srom(struct eth_device *dev, u_long ioaddr, int index, int new_value);
static void update_srom(struct eth_device *dev, bd_t *bis);
#endif
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+static int read_srom(struct eth_device *dev, u_long ioaddr, int index);
static void read_hw_addr(struct eth_device* dev, bd_t * bis);
+#endif /* CONFIG_TULIP_FIX_DAVICOM */
static void send_setup_frame(struct eth_device* dev, bd_t * bis);
static int dc21x4x_init(struct eth_device* dev, bd_t* bis);
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &iobase);
iobase &= PCI_BASE_ADDRESS_MEM_MASK;
#endif
-
-#ifdef DEBUG
- printf("dc21x4x: DEC 21142 PCI Device @0x%x\n", iobase);
-#endif
+ debug ("dc21x4x: DEC 21142 PCI Device @0x%x\n", iobase);
dev = (struct eth_device*) malloc(sizeof *dev);
#ifdef CONFIG_TULIP_FIX_DAVICOM
- sprintf(dev->name, "Davicom#%d", card_number);
+ sprintf(dev->name, "Davicom#%d", card_number);
#else
- sprintf(dev->name, "dc21x4x#%d", card_number);
+ sprintf(dev->name, "dc21x4x#%d", card_number);
#endif
#ifdef CONFIG_TULIP_USE_IO
udelay(10 * 1000);
#ifndef CONFIG_TULIP_FIX_DAVICOM
- read_hw_addr(dev, bis);
+ read_hw_addr(dev, bis);
#endif
eth_register(dev);
if (le32_to_cpu(tx_ring[tx_new].status) & TD_ES) {
#if 0 /* test-only */
printf("TX error status = 0x%08X\n",
- le32_to_cpu(tx_ring[tx_new].status));
+ le32_to_cpu(tx_ring[tx_new].status));
#endif
tx_ring[tx_new].status = 0x0;
goto Done;
return;
}
+#if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM)
/* SROM Read and write routines.
*/
-
static void
sendto_srom(struct eth_device* dev, u_int command, u_long addr)
{
return retval;
}
+#endif /* UPDATE_SROM || !CONFIG_TULIP_FIX_DAVICOM */
-/* This executes a generic EEPROM command, typically a write or write enable.
- It returns the data output from the EEPROM, and thus may also be used for
- reads. */
+/* This executes a generic EEPROM command, typically a write or write
+ * enable. It returns the data output from the EEPROM, and thus may
+ * also be used for reads.
+ */
+#if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM)
static int do_eeprom_cmd(struct eth_device *dev, u_long ioaddr, int cmd, int cmd_len)
{
unsigned retval = 0;
return retval;
}
+#endif /* UPDATE_SROM || !CONFIG_TULIP_FIX_DAVICOM */
+#ifndef CONFIG_TULIP_FIX_DAVICOM
static int read_srom(struct eth_device *dev, u_long ioaddr, int index)
{
int ee_addr_size = do_read_eeprom(dev, ioaddr, 0xff, 8) & 0x40000 ? 8 : 6;
(((SROM_READ_CMD << ee_addr_size) | index) << 16)
| 0xffff, 3 + ee_addr_size + 16);
}
+#endif /* CONFIG_TULIP_FIX_DAVICOM */
#ifdef UPDATE_SROM
static int write_srom(struct eth_device *dev, u_long ioaddr, int index, int new_value)
}
#endif
+#ifndef CONFIG_TULIP_FIX_DAVICOM
static void read_hw_addr(struct eth_device *dev, bd_t *bis)
{
u_short tmp, *p = (short *)(&dev->enetaddr[0]);
if ((j == 0) || (j == 0x2fffd)) {
memset (dev->enetaddr, 0, ETH_ALEN);
-#ifdef DEBUG
- printf("Warning: can't read HW address from SROM.\n");
-#endif
+ debug ("Warning: can't read HW address from SROM.\n");
goto Done;
}
#endif
return;
}
+#endif /* CONFIG_TULIP_FIX_DAVICOM */
#ifdef UPDATE_SROM
static void update_srom(struct eth_device *dev, bd_t *bis)
write_srom(dev, DE4X5_APROM, i, eeprom[i]);
}
}
-#endif
+#endif /* UPDATE_SROM */
-#endif
+#endif /* CFG_CMD_NET && CONFIG_NET_MULTI && CONFIG_TULIP */
#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */
#define RPC_LED_TX (0x06) /* LED = TX packet occurred */
#define RPC_LED_RX (0x07) /* LED = RX packet occurred */
-#if defined(CONFIG_DK1C20)
+#if defined(CONFIG_DK1C20) || defined(CONFIG_DK1S10)
/* buggy schematic: LEDa -> yellow, LEDb --> green */
#define RPC_DEFAULT ( RPC_SPEED | RPC_DPLX | RPC_ANEG \
| (RPC_LED_TX_RX << RPC_LSXA_SHFT) \
--- /dev/null
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * asm-nios/status_led.h
+ *
+ * NIOS PIO based status led support functions
+ */
+
+#ifndef __ASM_STATUS_LED_H__
+#define __ASM_STATUS_LED_H__
+
+#include <nios-io.h>
+
+/* led_id_t is unsigned int mask */
+typedef unsigned int led_id_t;
+
+#ifdef STATUS_LED_WRONLY /* emulate read access */
+static led_id_t __led_portval = 0;
+#endif
+
+static inline void __led_init (led_id_t mask, int state)
+{
+ nios_pio_t *piop = (nios_pio_t*)STATUS_LED_BASE;
+
+#ifdef STATUS_LED_WRONLY /* emulate read access */
+
+#if (STATUS_LED_ACTIVE == 0)
+ if (state == STATUS_LED_ON)
+ __led_portval &= ~mask;
+ else
+ __led_portval |= mask;
+#else
+ if (state == STATUS_LED_ON)
+ __led_portval |= mask;
+ else
+ __led_portval &= ~mask;
+#endif
+
+ piop->data = __led_portval;
+
+#else /* !STATUS_LED_WRONLY */
+
+#if (STATUS_LED_ACTIVE == 0)
+ if (state == STATUS_LED_ON)
+ piop->data &= ~mask;
+ else
+ piop->data |= mask;
+#else
+ if (state == STATUS_LED_ON)
+ piop->data |= mask;
+ else
+ piop->data &= ~mask;
+#endif
+
+ piop->direction |= mask;
+
+#endif /* STATUS_LED_WRONLY */
+}
+
+static inline void __led_toggle (led_id_t mask)
+{
+ nios_pio_t *piop = (nios_pio_t*)STATUS_LED_BASE;
+
+#ifdef STATUS_LED_WRONLY /* emulate read access */
+
+ __led_portval ^= mask;
+ piop->data = __led_portval;
+
+#else /* !STATUS_LED_WRONLY */
+
+ piop->data ^= mask;
+
+#endif /* STATUS_LED_WRONLY */
+}
+
+static inline void __led_set (led_id_t mask, int state)
+{
+ nios_pio_t *piop = (nios_pio_t*)STATUS_LED_BASE;
+
+#ifdef STATUS_LED_WRONLY /* emulate read access */
+
+#if (STATUS_LED_ACTIVE == 0)
+ if (state == STATUS_LED_ON)
+ __led_portval &= ~mask;
+ else
+ __led_portval |= mask;
+#else
+ if (state == STATUS_LED_ON)
+ __led_portval |= mask;
+ else
+ __led_portval &= ~mask;
+#endif
+
+ piop->data = __led_portval;
+
+#else /* !STATUS_LED_WRONLY */
+
+#if (STATUS_LED_ACTIVE == 0)
+ if (state == STATUS_LED_ON)
+ piop->data &= ~mask;
+ else
+ piop->data |= mask;
+#else
+ if (state == STATUS_LED_ON)
+ piop->data |= mask;
+ else
+ piop->data &= ~mask;
+#endif
+
+#endif /* STATUS_LED_WRONLY */
+}
+
+#endif /* __ASM_STATUS_LED_H__ */
0x0343, 0x0454, 0x0565, 0x0565, 0x0676, 0x0787, 0x0898, 0x0999,
0x0AAA, 0x0ABA, 0x0BCB, 0x0CCC, 0x0DDD, 0x0EEE, 0x0FFF, 0x0FB3,
0x0FB4, 0x0FC4, 0x0FC5, 0x0FC6, 0x0FD7, 0x0FD8, 0x0FD9, 0x0FDA,
- 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF,
+ 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF,
};
unsigned char bmp_logo_bitmap[] = {
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
+ * Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
#ifndef __CONFIG_H
#define __CONFIG_H
+/*
+ * NIOS CPU configuration.
+ *
+ * Here we must define CPU dependencies. Any unsupported option have to
+ * be defined with zero, example CPU without data cache / OCI:
+ *
+ * #define CFG_NIOS_CPU_ICACHE 4096
+ * #define CFG_NIOS_CPU_DCACHE 0
+ * #define CFG_NIOS_CPU_OCI_BASE 0
+ * #define CFG_NIOS_CPU_OCI_SIZE 0
+ */
+
+#if defined(CONFIG_NIOS_SAFE_32)
+
+/* TODO */
+
+#elif defined(CONFIG_NIOS_STANDARD_32)
+
+/* CPU core */
+#define CFG_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
+#define CFG_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */
+#define CFG_NIOS_CPU_DCACHE (4 * 1024) /* data cache */
+#define CFG_NIOS_CPU_REG_NUMS 256 /* number of register */
+#define CFG_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_STACK 0x008fff00 /* stack top addr */
+#define CFG_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */
+#define CFG_NIOS_CPU_VEC_SIZE 256 /* size */
+#define CFG_NIOS_CPU_VEC_NUMS 64 /* numbers */
+#define CFG_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */
+#define CFG_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
+ /* yes(1) */
+
+/* on-chip extensions */
+#define CFG_NIOS_CPU_RAM_BASE 0 /* on chip RAM addr */
+#define CFG_NIOS_CPU_RAM_SIZE 0 /* size */
+
+#define CFG_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */
+#define CFG_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
+
+#define CFG_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */
+#define CFG_NIOS_CPU_OCI_SIZE 256 /* size */
+
+/* timer */
+#define CFG_NIOS_CPU_TIMER_NUMS 2 /* number of timer */
+
+#define CFG_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */
+#define CFG_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
+#define CFG_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
+#define CFG_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
+ /* yes(1) */
+
+#define CFG_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */
+#define CFG_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */
+#define CFG_NIOS_CPU_TIMER1_PER 10000 /* periode usec */
+#define CFG_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */
+ /* yes(1) */
+
+/* serial i/o */
+#define CFG_NIOS_CPU_UART_NUMS 1 /* number of uarts */
+
+#define CFG_NIOS_CPU_UART0 0x00920900 /* UART0 addr */
+#define CFG_NIOS_CPU_UART0_IRQ 25 /* IRQ */
+#define CFG_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
+#define CFG_NIOS_CPU_UART0_DB 8 /* data bit */
+#define CFG_NIOS_CPU_UART0_SB 1 /* stop bit */
+#define CFG_NIOS_CPU_UART0_PA 0 /* parity none(0) */
+ /* odd(1) */
+ /* even(2) */
+#define CFG_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
+ /* crts(1) */
+#define CFG_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
+ /* yes(1) */
+
+/* parallel i/o */
+#define CFG_NIOS_CPU_PIO_NUMS 8 /* number of parports */
+
+#define CFG_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */
+#define CFG_NIOS_CPU_PIO0_IRQ 40 /* IRQ */
+#define CFG_NIOS_CPU_PIO0_BITS 4 /* number of bits */
+#define CFG_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */
+#undef CFG_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO1_BITS 11 /* number of bits */
+#define CFG_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */
+#undef CFG_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO2_BITS 8 /* number of bits */
+#define CFG_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */
+#undef CFG_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO3_BITS 16 /* number of bits */
+#define CFG_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */
+#undef CFG_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO4_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */
+#define CFG_NIOS_CPU_PIO5_IRQ 35 /* IRQ */
+#define CFG_NIOS_CPU_PIO5_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */
+#undef CFG_NIOS_CPU_PIO6_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO6_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */
+#undef CFG_NIOS_CPU_PIO7_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO7_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+/* IDE i/f */
+#define CFG_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
+#define CFG_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */
+
+/* active serial memory i/f */
+#define CFG_NIOS_CPU_ASMI_NUMS 1 /* number of ASMI */
+#define CFG_NIOS_CPU_ASMI0 0x00920b00 /* ASMI0 addr */
+#define CFG_NIOS_CPU_ASMI0_IRQ 45 /* IRQ */
+
+/* memory accessibility */
+#define CFG_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */
+#define CFG_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */
+
+#define CFG_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
+#define CFG_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
+
+#define CFG_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */
+#define CFG_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
+
+/* LAN */
+#define CFG_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
+
+#define CFG_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */
+#define CFG_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
+#define CFG_NIOS_CPU_LAN0_IRQ 30 /* IRQ */
+#define CFG_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
+#define CFG_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
+ /* cs8900(1) */
+ /* ex: alteramac(2) */
+
+/* symbolic redefinition (undef, if not present) */
+#define CFG_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */
+#define CFG_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/
+
+#define CFG_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */
+#define CFG_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */
+#define CFG_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */
+#define CFG_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */
+#define CFG_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */
+#define CFG_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */
+#define CFG_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */
+#define CFG_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */
+
+#else
+#error *** CFG_ERROR: you have to setup right NIOS CPU configuration
+#endif
+
/*------------------------------------------------------------------------
* BOARD/CPU -- TOP-LEVEL
*----------------------------------------------------------------------*/
#define CONFIG_NIOS 1 /* NIOS-32 core */
#define CONFIG_DK1C20 1 /* Cyclone DK-1C20 board*/
-#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clock */
+#define CONFIG_SYS_CLK_FREQ CFG_NIOS_CPU_CLK/* 50 MHz core clock */
+#define CFG_HZ 1000 /* 1 msec time tick */
+#undef CFG_CLKS_IN_HZ
+#define CONFIG_BOARD_PRE_INIT 1 /* enable early board-spec. init*/
/*------------------------------------------------------------------------
- * BASE ADDRESSES
+ * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
*----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE 0x00000000 /* Flash memory base */
-#define CFG_SRAM_BASE 0x00800000 /* External SRAM */
-#define CFG_SRAM_SIZE 0x00100000 /* 1 MByte */
-#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */
-#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */
-#define CFG_VECT_BASE 0x008fff00 /* Vector table addr */
+#if (CFG_NIOS_CPU_SDRAM_SIZE != 0)
+
+#define CFG_SDRAM_BASE CFG_NIOS_CPU_SDRAM_BASE
+#define CFG_SDRAM_SIZE CFG_NIOS_CPU_SDRAM_SIZE
+
+#else
+#error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config
+#endif
+
+#define CFG_SRAM_BASE CFG_NIOS_CPU_SRAM_BASE
+#define CFG_SRAM_SIZE CFG_NIOS_CPU_SRAM_SIZE
+#define CFG_VECT_BASE CFG_NIOS_CPU_VEC_BASE
/*------------------------------------------------------------------------
* MEMORY ORGANIZATION - For the most part, you can put things pretty
* -The stack is placed below global data (&grows down).
*----------------------------------------------------------------------*/
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */
-#define CFG_ENV_SIZE 0x10000 /* 64 KByte (1 sector) */
#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE -CFG_GBL_DATA_SIZE)
+#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP CFG_GBL_DATA_OFFSET
/*------------------------------------------------------------------------
- * FLASH
+ * FLASH (AM29LV065D)
*----------------------------------------------------------------------*/
+#if (CFG_NIOS_CPU_FLASH_SIZE != 0)
+
+#define CFG_FLASH_BASE CFG_NIOS_CPU_FLASH_BASE
+#define CFG_FLASH_SIZE CFG_NIOS_CPU_FLASH_SIZE
#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */
#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */
#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
+#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size */
+
+#else
+#error *** CFG_ERROR: you have to setup any Flash memory in NIOS CPU config
+#endif
/*------------------------------------------------------------------------
* ENVIRONMENT
*----------------------------------------------------------------------*/
+#if (CFG_NIOS_CPU_FLASH_SIZE != 0)
+
#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */
-#define CFG_ENV_ADDR 0x00000000 /* Mem addr of env */
+#define CFG_ENV_ADDR CFG_FLASH_BASE /* Mem addr of env */
+#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
+#else
+#define CFG_ENV_IS_NOWHERE 1 /* NO Environment */
+#endif
+
/*------------------------------------------------------------------------
* CONSOLE
*----------------------------------------------------------------------*/
-#define CFG_NIOS_CONSOLE 0x00920900 /* Cons uart base addr */
-#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#if (CFG_NIOS_CPU_UART_NUMS != 0)
+
+#define CFG_NIOS_CONSOLE CFG_NIOS_CPU_UART0 /* 1st UART is Cons. */
+
+#if (CFG_NIOS_CPU_UART0_BR != 0)
+#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
+#define CONFIG_BAUDRATE CFG_NIOS_CPU_UART0_BR
+#else
+#undef CFG_NIOS_FIXEDBAUD
#define CONFIG_BAUDRATE 115200
+#endif
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#else
+#error *** CFG_ERROR: you have to setup at least one UART in NIOS CPU config
+#endif
/*------------------------------------------------------------------------
* TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
* so an avalon bus timer is required.
*----------------------------------------------------------------------*/
-#define CFG_NIOS_TMRBASE 0x009209e0
-#define CFG_NIOS_TMRIRQ 50
-#define CFG_NIOS_TMRMS 10
+#if (CFG_NIOS_CPU_TIMER_NUMS != 0)
+
+#if (CFG_NIOS_CPU_TICK_TIMER == 0)
+
+#error *** CFG_ERROR: tick timer at TIMER0 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_TICK_TIMER == 1)
+
+#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */
+#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ
+
+#if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
+#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
+#else
+#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ
+#endif
+
+#endif /* CFG_NIOS_CPU_TICK_TIMER */
+
+#else
+#error *** CFG_ERROR: you have to setup at least one TIMER in NIOS CPU config
+#endif
/*------------------------------------------------------------------------
* Ethernet -- needs work!
*----------------------------------------------------------------------*/
-#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
-#define CONFIG_SMC91111_BASE 0x00910300 /* Base address */
-#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
-#define CONFIG_SMC_USE_32_BIT /* 32-bit data rd/wr */
+#if (CFG_NIOS_CPU_LAN_NUMS == 1)
+
+#if (CFG_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
+
+ /****************************************************/
+ /* !!! LAN91C111 works for NIOS with patch only !!! */
+ /****************************************************/
+#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
+#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
+#define CONFIG_SMC91111_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+
+#if (CFG_NIOS_CPU_LAN0_BUSW == 32)
+#define CONFIG_SMC_USE_32_BIT 1
+#else /* no */
+#undef CONFIG_SMC_USE_32_BIT
+#endif
+
+#elif (CFG_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
+
+ /********************************************/
+ /* !!! CS8900 is __not__ tested on NIOS !!! */
+ /********************************************/
+#define CONFIG_DRIVER_CS8900 /* Using CS8900 */
+#define CS8900_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+
+#if (CFG_NIOS_CPU_LAN0_BUSW == 32)
+#undef CS8900_BUS16
+#define CS8900_BUS32 1
+#else /* no */
+#define CS8900_BUS16 1
+#undef CS8900_BUS32
+#endif
+
+#else
+#error *** CFG_ERROR: invalid LAN0 chip type, check your NIOS CPU config
+#endif
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.2.21
#define CONFIG_SERVERIP 192.168.2.16
+#else
+#error *** CFG_ERROR: you have to setup just one LAN only or expand your config.h
+#endif
+
+/*------------------------------------------------------------------------
+ * STATUS LEDs
+ *----------------------------------------------------------------------*/
+#if (CFG_NIOS_CPU_PIO_NUMS != 0)
+
+#if (CFG_NIOS_CPU_LED_PIO == 0)
+
+#error *** CFG_ERROR: status LEDs at PIO0 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 1)
+
+#error *** CFG_ERROR: status LEDs at PIO1 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 2)
+
+#define STATUS_LED_BASE CFG_NIOS_CPU_PIO2
+#define STATUS_LED_BITS CFG_NIOS_CPU_PIO2_BITS
+#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
+
+#if (CFG_NIOS_CPU_PIO2_TYPE == 1)
+#define STATUS_LED_WRONLY 1
+#else
+#undef STATUS_LED_WRONLY
+#endif
+
+#elif (CFG_NIOS_CPU_LED_PIO == 3)
+
+#error *** CFG_ERROR: status LEDs at PIO3 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 4)
+
+#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 5)
+
+#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 6)
+
+#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 7)
+
+#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 8)
+
+#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 9)
+
+#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+
+#else
+#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_LED_PIO in right case
+#endif
+
+#define CONFIG_STATUS_LED 1 /* enable status led driver */
+
+#define STATUS_LED_BIT (1 << 0) /* LED[0] */
+#define STATUS_LED_STATE STATUS_LED_BLINKING
+#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
+#define STATUS_LED_PERIOD (CFG_HZ / 10) /* ca. 1 Hz */
+#define STATUS_LED_BOOT 0 /* boot LED */
+
+#if (STATUS_LED_BITS > 1)
+#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
+#define STATUS_LED_STATE1 STATUS_LED_OFF
+#define STATUS_LED_PERIOD1 (CFG_HZ / 50) /* ca. 5 Hz */
+#define STATUS_LED_RED 1 /* fail LED */
+#endif
+
+#if (STATUS_LED_BITS > 2)
+#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
+#define STATUS_LED_STATE2 STATUS_LED_OFF
+#define STATUS_LED_PERIOD2 (CFG_HZ / 10) /* ca. 1 Hz */
+#define STATUS_LED_YELLOW 2 /* info LED */
+#endif
+
+#if (STATUS_LED_BITS > 3)
+#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
+#define STATUS_LED_STATE3 STATUS_LED_OFF
+#define STATUS_LED_PERIOD3 (CFG_HZ / 10) /* ca. 1 Hz */
+#define STATUS_LED_GREEN 3 /* info LED */
+#endif
+
+#define STATUS_LED_PAR 1 /* makes status_led.h happy */
+
+#endif /* CFG_NIOS_CPU_PIO_NUMS */
+
+/*------------------------------------------------------------------------
+ * SEVEN SEGMENT LED DISPLAY
+ *----------------------------------------------------------------------*/
+#if (CFG_NIOS_CPU_PIO_NUMS != 0)
+
+#if (CFG_NIOS_CPU_SEVENSEG_PIO == 0)
+
+#error *** CFG_ERROR: status LEDs at PIO0 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 1)
+
+#error *** CFG_ERROR: status LEDs at PIO1 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 2)
+
+#error *** CFG_ERROR: status LEDs at PIO2 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 3)
+
+#define SEVENSEG_BASE CFG_NIOS_CPU_PIO3
+#define SEVENSEG_BITS CFG_NIOS_CPU_PIO3_BITS
+#define SEVENSEG_ACTIVE 0 /* LED on for bit == 1 */
+
+#if (CFG_NIOS_CPU_PIO3_TYPE == 1)
+#define SEVENSEG_WRONLY 1
+#else
+#undef SEVENSEG_WRONLY
+#endif
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 4)
+
+#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 5)
+
+#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 6)
+
+#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 7)
+
+#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 8)
+
+#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 9)
+
+#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+
+#else
+#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_SEVENSEG_PIO in right case
+#endif
+
+#define CONFIG_SEVENSEG 1 /* enable seven segment led driver */
+
+/*
+ * Dual 7-Segment Display pin assignment -- read more in your
+ * "Nios Development Board Reference Manual"
+ *
+ *
+ * (U8) HI:D[15..8] (U9) LO:D[7..0]
+ * ______ ______
+ * | D14 | | D6 |
+ * | | | |
+ * D9| |D13 D1| |D5
+ * |______| |______| ___
+ * | D8 | | D0 | | A |
+ * | | | | F|___|B
+ * D10| |D12 D2| |D4 | G |
+ * |______| |______| E|___|C
+ * D11 * D3 * D *
+ * D15 D7 DP
+ *
+ */
+#define SEVENSEG_DIGIT_HI_LO_EQUAL 1 /* high nibble equal low nibble */
+#define SEVENSEG_DIGIT_A (1 << 6) /* bit 6 is segment A */
+#define SEVENSEG_DIGIT_B (1 << 5) /* bit 5 is segment B */
+#define SEVENSEG_DIGIT_C (1 << 4) /* bit 4 is segment C */
+#define SEVENSEG_DIGIT_D (1 << 3) /* bit 3 is segment D */
+#define SEVENSEG_DIGIT_E (1 << 2) /* bit 2 is segment E */
+#define SEVENSEG_DIGIT_F (1 << 1) /* bit 1 is segment F */
+#define SEVENSEG_DIGIT_G (1 << 0) /* bit 0 is segment G */
+#define SEVENSEG_DIGIT_DP (1 << 7) /* bit 7 is decimal point */
+
+#endif /* CFG_NIOS_CPU_PIO_NUMS */
+
/*------------------------------------------------------------------------
* COMMANDS
*----------------------------------------------------------------------*/
/*------------------------------------------------------------------------
* MISC
*----------------------------------------------------------------------*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "==> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "DK1C20 > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#undef CFG_CLKS_IN_HZ
-#define CFG_HZ 1000 /* decr freq: 1ms ticks */
-#define CFG_LOAD_ADDR 0x00800000 /* Default load address */
+#define CFG_MAXARGS 16 /* max number of command args*/
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#if (CFG_SRAM_SIZE != 0)
+#define CFG_LOAD_ADDR CFG_SRAM_BASE /* Default load address */
+#else
+#undef CFG_LOAD_ADDR
+#endif
-#define CFG_MEMTEST_START 0x00000000
-#define CFG_MEMTEST_END 0x00000000
+#if (CFG_SDRAM_SIZE != 0)
+#define CFG_MEMTEST_START CFG_SDRAM_BASE /* SDRAM til stack area */
+#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024)) /* 1MB stack */
+#else
+#undef CFG_MEMTEST_START
+#undef CFG_MEMTEST_END
+#endif
#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * NIOS CPU configuration.
+ *
+ * Here we must define CPU dependencies. Any unsupported option have to
+ * be defined with zero, example CPU without data cache / OCI:
+ *
+ * #define CFG_NIOS_CPU_ICACHE 4096
+ * #define CFG_NIOS_CPU_DCACHE 0
+ * #define CFG_NIOS_CPU_OCI_BASE 0
+ * #define CFG_NIOS_CPU_OCI_SIZE 0
+ */
+
+#if defined(CONFIG_NIOS_SAFE_32)
+
+/* TODO */
+
+#elif defined(CONFIG_NIOS_STANDARD_32)
+
+/* CPU core */
+#define CFG_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
+#define CFG_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */
+#define CFG_NIOS_CPU_DCACHE (4 * 1024) /* data cache */
+#define CFG_NIOS_CPU_REG_NUMS 256 /* number of register */
+#define CFG_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_STACK 0x008fff00 /* stack top addr */
+#define CFG_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */
+#define CFG_NIOS_CPU_VEC_SIZE 256 /* size */
+#define CFG_NIOS_CPU_VEC_NUMS 64 /* numbers */
+#define CFG_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */
+#define CFG_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
+ /* yes(1) */
+
+/* on-chip extensions */
+#define CFG_NIOS_CPU_RAM_BASE 0x00900000 /* on chip RAM addr */
+#define CFG_NIOS_CPU_RAM_SIZE (64 * 1024) /* 64 KB size */
+
+#define CFG_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */
+#define CFG_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
+
+#define CFG_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */
+#define CFG_NIOS_CPU_OCI_SIZE 256 /* size */
+
+/* timer */
+#define CFG_NIOS_CPU_TIMER_NUMS 2 /* number of timer */
+
+#define CFG_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */
+#define CFG_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
+#define CFG_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
+#define CFG_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
+ /* yes(1) */
+
+#define CFG_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */
+#define CFG_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */
+#define CFG_NIOS_CPU_TIMER1_PER 10000 /* periode usec */
+#define CFG_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */
+ /* yes(1) */
+
+/* serial i/o */
+#define CFG_NIOS_CPU_UART_NUMS 1 /* number of uarts */
+
+#define CFG_NIOS_CPU_UART0 0x00920900 /* UART0 addr */
+#define CFG_NIOS_CPU_UART0_IRQ 25 /* IRQ */
+#define CFG_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
+#define CFG_NIOS_CPU_UART0_DB 8 /* data bit */
+#define CFG_NIOS_CPU_UART0_SB 1 /* stop bit */
+#define CFG_NIOS_CPU_UART0_PA 0 /* parity none(0) */
+ /* odd(1) */
+ /* even(2) */
+#define CFG_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
+ /* crts(1) */
+#define CFG_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
+ /* yes(1) */
+
+/* parallel i/o */
+#define CFG_NIOS_CPU_PIO_NUMS 8 /* number of parports */
+
+#define CFG_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */
+#define CFG_NIOS_CPU_PIO0_IRQ 40 /* IRQ */
+#define CFG_NIOS_CPU_PIO0_BITS 4 /* number of bits */
+#define CFG_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */
+#undef CFG_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO1_BITS 11 /* number of bits */
+#define CFG_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */
+#undef CFG_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO2_BITS 8 /* number of bits */
+#define CFG_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */
+#undef CFG_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO3_BITS 16 /* number of bits */
+#define CFG_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */
+#undef CFG_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO4_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */
+#define CFG_NIOS_CPU_PIO5_IRQ 35 /* IRQ */
+#define CFG_NIOS_CPU_PIO5_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */
+#undef CFG_NIOS_CPU_PIO6_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO6_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */
+#undef CFG_NIOS_CPU_PIO7_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO7_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+/* IDE i/f */
+#define CFG_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
+#define CFG_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */
+
+/* active serial memory i/f */
+#define CFG_NIOS_CPU_ASMI_NUMS 1 /* number of ASMI */
+#define CFG_NIOS_CPU_ASMI0 0x00920b00 /* ASMI0 addr */
+#define CFG_NIOS_CPU_ASMI0_IRQ 45 /* IRQ */
+
+/* memory accessibility */
+#define CFG_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */
+#define CFG_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */
+
+#define CFG_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
+#define CFG_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
+
+#define CFG_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */
+#define CFG_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
+
+/* LAN */
+#define CFG_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
+
+#define CFG_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */
+#define CFG_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
+#define CFG_NIOS_CPU_LAN0_IRQ 30 /* IRQ */
+#define CFG_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
+#define CFG_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
+ /* cs8900(1) */
+ /* ex: alteramac(2) */
+
+/* symbolic redefinition (undef, if not present) */
+#define CFG_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */
+#define CFG_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/
+
+#define CFG_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */
+#define CFG_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */
+#define CFG_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */
+#define CFG_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */
+#define CFG_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */
+#define CFG_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */
+#define CFG_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */
+#define CFG_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */
+
+#else
+#error *** CFG_ERROR: you have to setup right NIOS CPU configuration
+#endif
+
+/*------------------------------------------------------------------------
+ * BOARD/CPU -- TOP-LEVEL
+ *----------------------------------------------------------------------*/
+#define CONFIG_NIOS 1 /* NIOS-32 core */
+#define CONFIG_DK1S10 1 /* Stratix DK-1S10 board*/
+#define CONFIG_SYS_CLK_FREQ CFG_NIOS_CPU_CLK/* 50 MHz core clock */
+#define CFG_HZ 1000 /* 1 msec time tick */
+#undef CFG_CLKS_IN_HZ
+#define CONFIG_BOARD_PRE_INIT 1 /* enable early board-spec. init*/
+
+/*------------------------------------------------------------------------
+ * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
+ *----------------------------------------------------------------------*/
+#if (CFG_NIOS_CPU_SDRAM_SIZE != 0)
+
+#define CFG_SDRAM_BASE CFG_NIOS_CPU_SDRAM_BASE
+#define CFG_SDRAM_SIZE CFG_NIOS_CPU_SDRAM_SIZE
+
+#else
+#error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config
+#endif
+
+#define CFG_SRAM_BASE CFG_NIOS_CPU_SRAM_BASE
+#define CFG_SRAM_SIZE CFG_NIOS_CPU_SRAM_SIZE
+#define CFG_VECT_BASE CFG_NIOS_CPU_VEC_BASE
+
+/*------------------------------------------------------------------------
+ * MEMORY ORGANIZATION - For the most part, you can put things pretty
+ * much anywhere. This is pretty flexible for Nios. So here we make some
+ * arbitrary choices & assume that the monitor is placed at the end of
+ * a memory resource (so you must make sure TEXT_BASE is chosen
+ * appropriately).
+ *
+ * -The heap is placed below the monitor.
+ * -Global data is placed below the heap.
+ * -The stack is placed below global data (&grows down).
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */
+#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP CFG_GBL_DATA_OFFSET
+
+/*------------------------------------------------------------------------
+ * FLASH (AM29LV065D)
+ *----------------------------------------------------------------------*/
+#if (CFG_NIOS_CPU_FLASH_SIZE != 0)
+
+#define CFG_FLASH_BASE CFG_NIOS_CPU_FLASH_BASE
+#define CFG_FLASH_SIZE CFG_NIOS_CPU_FLASH_SIZE
+#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */
+#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */
+#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
+#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
+#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size */
+
+#else
+#error *** CFG_ERROR: you have to setup any Flash memory in NIOS CPU config
+#endif
+
+/*------------------------------------------------------------------------
+ * ENVIRONMENT
+ *----------------------------------------------------------------------*/
+#if (CFG_NIOS_CPU_FLASH_SIZE != 0)
+
+#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */
+#define CFG_ENV_ADDR CFG_FLASH_BASE /* Mem addr of env */
+#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
+#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
+
+#else
+#define CFG_ENV_IS_NOWHERE 1 /* NO Environment */
+#endif
+
+/*------------------------------------------------------------------------
+ * CONSOLE
+ *----------------------------------------------------------------------*/
+#if (CFG_NIOS_CPU_UART_NUMS != 0)
+
+#define CFG_NIOS_CONSOLE CFG_NIOS_CPU_UART0 /* 1st UART is Cons. */
+
+#if (CFG_NIOS_CPU_UART0_BR != 0)
+#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
+#define CONFIG_BAUDRATE CFG_NIOS_CPU_UART0_BR
+#else
+#undef CFG_NIOS_FIXEDBAUD
+#define CONFIG_BAUDRATE 115200
+#endif
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#else
+#error *** CFG_ERROR: you have to setup at least one UART in NIOS CPU config
+#endif
+
+/*------------------------------------------------------------------------
+ * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
+ * so an avalon bus timer is required.
+ *----------------------------------------------------------------------*/
+#if (CFG_NIOS_CPU_TIMER_NUMS != 0)
+
+#if (CFG_NIOS_CPU_TICK_TIMER == 0)
+
+#error *** CFG_ERROR: tick timer at TIMER0 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_TICK_TIMER == 1)
+
+#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */
+#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ
+
+#if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
+#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
+#else
+#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ
+#endif
+
+#endif /* CFG_NIOS_CPU_TICK_TIMER */
+
+#else
+#error *** CFG_ERROR: you have to setup at least one TIMER in NIOS CPU config
+#endif
+
+/*------------------------------------------------------------------------
+ * Ethernet -- needs work!
+ *----------------------------------------------------------------------*/
+#if (CFG_NIOS_CPU_LAN_NUMS == 1)
+
+#if (CFG_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
+
+ /****************************************************/
+ /* !!! LAN91C111 works for NIOS with patch only !!! */
+ /****************************************************/
+#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
+#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
+#define CONFIG_SMC91111_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+
+#if (CFG_NIOS_CPU_LAN0_BUSW == 32)
+#define CONFIG_SMC_USE_32_BIT 1
+#else /* no */
+#undef CONFIG_SMC_USE_32_BIT
+#endif
+
+#elif (CFG_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
+
+ /********************************************/
+ /* !!! CS8900 is __not__ tested on NIOS !!! */
+ /********************************************/
+#define CONFIG_DRIVER_CS8900 /* Using CS8900 */
+#define CS8900_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+
+#if (CFG_NIOS_CPU_LAN0_BUSW == 32)
+#undef CS8900_BUS16
+#define CS8900_BUS32 1
+#else /* no */
+#define CS8900_BUS16 1
+#undef CS8900_BUS32
+#endif
+
+#else
+#error *** CFG_ERROR: invalid LAN0 chip type, check your NIOS CPU config
+#endif
+
+#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.2.21
+#define CONFIG_SERVERIP 192.168.2.16
+
+#else
+#error *** CFG_ERROR: you have to setup just one LAN only or expand your config.h
+#endif
+
+/*------------------------------------------------------------------------
+ * STATUS LEDs
+ *----------------------------------------------------------------------*/
+#if (CFG_NIOS_CPU_PIO_NUMS != 0)
+
+#if (CFG_NIOS_CPU_LED_PIO == 0)
+
+#error *** CFG_ERROR: status LEDs at PIO0 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 1)
+
+#error *** CFG_ERROR: status LEDs at PIO1 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 2)
+
+#define STATUS_LED_BASE CFG_NIOS_CPU_PIO2
+#define STATUS_LED_BITS CFG_NIOS_CPU_PIO2_BITS
+#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
+
+#if (CFG_NIOS_CPU_PIO2_TYPE == 1)
+#define STATUS_LED_WRONLY 1
+#else
+#undef STATUS_LED_WRONLY
+#endif
+
+#elif (CFG_NIOS_CPU_LED_PIO == 3)
+
+#error *** CFG_ERROR: status LEDs at PIO3 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 4)
+
+#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 5)
+
+#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 6)
+
+#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 7)
+
+#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 8)
+
+#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_LED_PIO == 9)
+
+#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+
+#else
+#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_LED_PIO in right case
+#endif
+
+#define CONFIG_STATUS_LED 1 /* enable status led driver */
+
+#define STATUS_LED_BIT (1 << 0) /* LED[0] */
+#define STATUS_LED_STATE STATUS_LED_BLINKING
+#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
+#define STATUS_LED_PERIOD (CFG_HZ / 10) /* ca. 1 Hz */
+#define STATUS_LED_BOOT 0 /* boot LED */
+
+#if (STATUS_LED_BITS > 1)
+#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
+#define STATUS_LED_STATE1 STATUS_LED_OFF
+#define STATUS_LED_PERIOD1 (CFG_HZ / 50) /* ca. 5 Hz */
+#define STATUS_LED_RED 1 /* fail LED */
+#endif
+
+#if (STATUS_LED_BITS > 2)
+#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
+#define STATUS_LED_STATE2 STATUS_LED_OFF
+#define STATUS_LED_PERIOD2 (CFG_HZ / 10) /* ca. 1 Hz */
+#define STATUS_LED_YELLOW 2 /* info LED */
+#endif
+
+#if (STATUS_LED_BITS > 3)
+#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
+#define STATUS_LED_STATE3 STATUS_LED_OFF
+#define STATUS_LED_PERIOD3 (CFG_HZ / 10) /* ca. 1 Hz */
+#define STATUS_LED_GREEN 3 /* info LED */
+#endif
+
+#define STATUS_LED_PAR 1 /* makes status_led.h happy */
+
+#endif /* CFG_NIOS_CPU_PIO_NUMS */
+
+/*------------------------------------------------------------------------
+ * SEVEN SEGMENT LED DISPLAY
+ *----------------------------------------------------------------------*/
+#if (CFG_NIOS_CPU_PIO_NUMS != 0)
+
+#if (CFG_NIOS_CPU_SEVENSEG_PIO == 0)
+
+#error *** CFG_ERROR: status LEDs at PIO0 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 1)
+
+#error *** CFG_ERROR: status LEDs at PIO1 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 2)
+
+#error *** CFG_ERROR: status LEDs at PIO2 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 3)
+
+#define SEVENSEG_BASE CFG_NIOS_CPU_PIO3
+#define SEVENSEG_BITS CFG_NIOS_CPU_PIO3_BITS
+#define SEVENSEG_ACTIVE 0 /* LED on for bit == 1 */
+
+#if (CFG_NIOS_CPU_PIO3_TYPE == 1)
+#define SEVENSEG_WRONLY 1
+#else
+#undef SEVENSEG_WRONLY
+#endif
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 4)
+
+#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 5)
+
+#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 6)
+
+#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 7)
+
+#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 8)
+
+#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+
+#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 9)
+
+#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+
+#else
+#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_SEVENSEG_PIO in right case
+#endif
+
+#define CONFIG_SEVENSEG 1 /* enable seven segment led driver */
+
+/*
+ * Dual 7-Segment Display pin assignment -- read more in your
+ * "Nios Development Board Reference Manual"
+ *
+ *
+ * (U8) HI:D[15..8] (U9) LO:D[7..0]
+ * ______ ______
+ * | D14 | | D6 |
+ * | | | |
+ * D9| |D13 D1| |D5
+ * |______| |______| ___
+ * | D8 | | D0 | | A |
+ * | | | | F|___|B
+ * D10| |D12 D2| |D4 | G |
+ * |______| |______| E|___|C
+ * D11 * D3 * D *
+ * D15 D7 DP
+ *
+ */
+#define SEVENSEG_DIGIT_HI_LO_EQUAL 1 /* high nibble equal low nibble */
+#define SEVENSEG_DIGIT_A (1 << 6) /* bit 6 is segment A */
+#define SEVENSEG_DIGIT_B (1 << 5) /* bit 5 is segment B */
+#define SEVENSEG_DIGIT_C (1 << 4) /* bit 4 is segment C */
+#define SEVENSEG_DIGIT_D (1 << 3) /* bit 3 is segment D */
+#define SEVENSEG_DIGIT_E (1 << 2) /* bit 2 is segment E */
+#define SEVENSEG_DIGIT_F (1 << 1) /* bit 1 is segment F */
+#define SEVENSEG_DIGIT_G (1 << 0) /* bit 0 is segment G */
+#define SEVENSEG_DIGIT_DP (1 << 7) /* bit 7 is decimal point */
+
+#endif /* CFG_NIOS_CPU_PIO_NUMS */
+
+/*------------------------------------------------------------------------
+ * COMMANDS
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_BMP | \
+ CFG_CMD_BSP | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DOC | \
+ CFG_CMD_DTT | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_FAT | \
+ CFG_CMD_FDC | \
+ CFG_CMD_FDOS | \
+ CFG_CMD_HWFLOW | \
+ CFG_CMD_IDE | \
+ CFG_CMD_I2C | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_KGDB | \
+ CFG_CMD_NAND | \
+ CFG_CMD_MMC | \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PCMCIA | \
+ CFG_CMD_SCSI | \
+ CFG_CMD_SPI | \
+ CFG_CMD_VFD | \
+ CFG_CMD_USB ) )
+
+
+#include <cmd_confdefs.h>
+
+/*------------------------------------------------------------------------
+ * KGDB
+ *----------------------------------------------------------------------*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 9600
+#endif
+
+/*------------------------------------------------------------------------
+ * MISC
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "DK1S10 > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args*/
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#if (CFG_SRAM_SIZE != 0)
+#define CFG_LOAD_ADDR CFG_SRAM_BASE /* Default load address */
+#else
+#undef CFG_LOAD_ADDR
+#endif
+
+#if (CFG_SDRAM_SIZE != 0)
+#define CFG_MEMTEST_START CFG_SDRAM_BASE /* SDRAM til stack area */
+#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024)) /* 1MB stack */
+#else
+#undef CFG_MEMTEST_START
+#undef CFG_MEMTEST_END
+#endif
+
+
+#endif /* __CONFIG_H */
#define __NIOSIO_H__
/*------------------------------------------------------------------------
- * UART
+ * UART (http://www.altera.com/literature/ds/ds_nios_uart.pdf)
*----------------------------------------------------------------------*/
typedef volatile struct nios_uart_t {
unsigned rxdata; /* Rx data reg */
/*------------------------------------------------------------------------
- * TIMER
+ * TIMER (http://www.altera.com/literature/ds/ds_nios_timer.pdf)
*----------------------------------------------------------------------*/
typedef volatile struct nios_timer_t {
unsigned status; /* Timer status reg */
#define NIOS_TIMER_START (1 << 2) /* Start timer */
#define NIOS_TIMER_STOP (1 << 3) /* Stop timer */
+
+/*------------------------------------------------------------------------
+ * PIO (http://www.altera.com/literature/ds/ds_nios_pio.pdf)
+ *----------------------------------------------------------------------*/
+typedef volatile struct nios_pio_t {
+ unsigned int data; /* Data value at each PIO in/out */
+ unsigned int direction; /* Data direct. for each PIO bit */
+ unsigned int interruptmask; /* Per-bit IRQ enable/disable */
+ unsigned int edgecapture; /* Per-bit sync. edge detect & hold */
+}nios_pio_t;
+
+/* direction register */
+#define NIOS_PIO_OUT (1) /* PIO bit is output */
+#define NIOS_PIO_IN (0) /* PIO bit is input */
+
+
+/*------------------------------------------------------------------------
+ * SPI (http://www.altera.com/literature/ds/ds_nios_spi.pdf)
+ *----------------------------------------------------------------------*/
+typedef volatile struct nios_spi_t {
+ unsigned rxdata; /* Rx data reg */
+ unsigned txdata; /* Tx data reg */
+ unsigned status; /* Status reg */
+ unsigned control; /* Control reg */
+ unsigned reserved; /* (master only) */
+ unsigned slaveselect; /* SPI slave selct mask (master only) */
+}nios_spi_t;
+
+/* status register */
+#define NIOS_SPI_ROE (1 << 3) /* rx overrun */
+#define NIOS_SPI_TOE (1 << 4) /* tx overrun */
+#define NIOS_SPI_TMT (1 << 5) /* tx empty */
+#define NIOS_SPI_TRDY (1 << 6) /* tx ready */
+#define NIOS_SPI_RRDY (1 << 7) /* rx ready */
+#define NIOS_SPI_E (1 << 8) /* exception */
+
+/* control register */
+#define NIOS_SPI_IROE (1 << 3) /* rx overrun int ena */
+#define NIOS_SPI_ITOE (1 << 4) /* tx overrun int ena */
+#define NIOS_SPI_ITRDY (1 << 6) /* tx ready int ena */
+#define NIOS_SPI_IRRDY (1 << 7) /* rx ready int ena */
+#define NIOS_SPI_IE (1 << 8) /* exception int ena */
+#define NIOS_SPI_SSO (1 << 10) /* override SS_n output */
+
#endif /* __NIOSIO_H__ */
#include <devices.h>
#include <watchdog.h>
#include <net.h>
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
/*
*/
interrupt_init ();
+
+#ifdef CONFIG_STATUS_LED
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
+#endif
+
/* main_loop */
for (;;) {
WATCHDOG_RESET ();
void hang (void)
{
+#ifdef CONFIG_STATUS_LED
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
+ status_led_set(STATUS_LED_RED, STATUS_LED_BLINKING);
+#endif
puts("### ERROR ### Please reset board ###\n");
for (;;);
}
projects / u-boot / commitdiff