mxs: spi: Fix the MXS SPI for mx23

The MX23 has slightly different register layout. Adjust the SPI
driver to match the layout, both the PIO and DMA part.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>

diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
index 6acc95a1b4cf13309661be4169b1d733fbe7889a..b5b32dc5cc08c64b4b0fb14e8e58a708f27aecff 100644 (file)
--- a/drivers/spi/mxs_spi.c
+++ b/drivers/spi/mxs_spi.c
@@ -168,7 +168,12 @@ static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave,
 
        while (length--) {
                /* We transfer 1 byte */
+#if defined(CONFIG_MX23)
+               writel(SSP_CTRL0_XFER_COUNT_MASK, &ssp_regs->hw_ssp_ctrl0_clr);
+               writel(1, &ssp_regs->hw_ssp_ctrl0_set);
+#elif defined(CONFIG_MX28)
                writel(1, &ssp_regs->hw_ssp_xfer_size);
+#endif
 
                if ((flags & SPI_XFER_END) && !length)
                        mxs_spi_end_xfer(ssp_regs);
@@ -226,6 +231,12 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
        int tl;
        int ret = 0;
 
+#if defined(CONFIG_MX23)
+       const int mxs_spi_pio_words = 1;
+#elif defined(CONFIG_MX28)
+       const int mxs_spi_pio_words = 4;
+#endif
+
        ALLOC_CACHE_ALIGN_BUFFER(struct mxs_dma_desc, desc, desc_count);
 
        memset(desc, 0, sizeof(struct mxs_dma_desc) * desc_count);
@@ -281,7 +292,7 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
 
                dp->cmd.data |=
                        ((tl & 0xffff) << MXS_DMA_DESC_BYTES_OFFSET) |
-                       (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+                       (mxs_spi_pio_words << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
                        MXS_DMA_DESC_HALT_ON_TERMINATE |
                        MXS_DMA_DESC_TERMINATE_FLUSH;
 
@@ -298,15 +309,19 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
                }
 
                /*
-                * Write CTRL0, CMD0, CMD1, XFER_SIZE registers. It is
+                * Write CTRL0, CMD0, CMD1 and XFER_SIZE registers in
+                * case of MX28, write only CTRL0 in case of MX23 due
+                * to the difference in register layout. It is utterly
                 * essential that the XFER_SIZE register is written on
                 * a per-descriptor basis with the same size as is the
                 * descriptor!
                 */
                dp->cmd.pio_words[0] = ctrl0;
+#ifdef CONFIG_MX28
                dp->cmd.pio_words[1] = 0;
                dp->cmd.pio_words[2] = 0;
                dp->cmd.pio_words[3] = tl;
+#endif
 
                mxs_dma_desc_append(dmach, dp);