powerpc/P2041RDB: Fix Flash address LAW address

P2041RDB uses common corenet TLB and LAW. However it doesn't have promjet
connector. It is necessary to use the same base address for correct LAW
address. An offset is added for NOR flash.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index e2f86dbb8628fce26ed1ca4f3399a48f5dc2598b..c888d7a014cabcb120bae2906e0c6c97054c96eb 100644 (file)
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -202,15 +202,21 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 /* Set the local bus clock 1/8 of platform clock */
 #define CONFIG_SYS_LBC_LCRR            LCRR_CLKDIV_8
 
-#define CONFIG_SYS_FLASH_BASE          0xe8000000      /* Start of PromJet */
+/*
+ * This board doesn't have a promjet connector.
+ * However, it uses commone corenet board LAW and TLB.
+ * It is necessary to use the same start address with proper offset.
+ */
+#define CONFIG_SYS_FLASH_BASE          0xe0000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_FLASH_BASE_PHYS     0xfe8000000ull
+#define CONFIG_SYS_FLASH_BASE_PHYS     0xfe0000000ull
 #else
 #define CONFIG_SYS_FLASH_BASE_PHYS     CONFIG_SYS_FLASH_BASE
 #endif
 
 #define CONFIG_SYS_FLASH_BR_PRELIM \
-               (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
+               (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
+               BR_PS_16 | BR_V)
 #define CONFIG_SYS_FLASH_OR_PRELIM \
                ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
                 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
@@ -294,7 +300,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
-#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE_PHYS}
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R      /* call board_early_init_r function */