tegra: Use funcmux for MMC on seaboard

Use the new funcmux_select() feature to set up the MMC pin mux.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 56acd6156f9818dc4ff5b05b920fb6dd3ca19a88..9ab6825bb8fed3f5978c09ae9fd7a22231372944 100644 (file)
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -24,6 +24,8 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/tegra2.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/mmc.h>
 #include <asm/gpio.h>
@@ -59,23 +61,8 @@ void gpio_config_uart(void)
  */
 static void pin_mux_mmc(void)
 {
-       /* SDMMC4: config 3, x8 on 2nd set of pins */
-       pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
-       pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
-       pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
-
-       pinmux_tristate_disable(PINGRP_ATB);
-       pinmux_tristate_disable(PINGRP_GMA);
-       pinmux_tristate_disable(PINGRP_GME);
-
-       /* SDMMC3: SDIO3_CLK, SDIO3_CMD, SDIO3_DAT[3:0] */
-       pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
-       pinmux_set_func(PINGRP_SDC, PMUX_FUNC_SDIO3);
-       pinmux_set_func(PINGRP_SDD, PMUX_FUNC_SDIO3);
-
-       pinmux_tristate_disable(PINGRP_SDC);
-       pinmux_tristate_disable(PINGRP_SDD);
-       pinmux_tristate_disable(PINGRP_SDB);
+       funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
+       funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT);
 
        /* For power GPIO PI6 */
        pinmux_tristate_disable(PINGRP_ATA);