#include "pixis.h"
-
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
-extern long int spd_sdram(void);
+#if defined(CONFIG_SPD_EEPROM)
+#include "spd_sdram.h"
+#endif
void sdram_init(void);
long int fixed_sdram(void);
int board_early_init_f (void)
{
- return 0;
+ return 0;
}
int checkboard (void)
#ifdef CONFIG_PCI
- volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_pex_t *pex1 = &immap->im_pex1;
-
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
- uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
- uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
-
-
- if ((io_sel==2 || io_sel==3 || io_sel==5 \
- || io_sel==6 || io_sel==7 || io_sel==0xF)
- && !(devdisr & MPC86xx_DEVDISR_PCIEX1)){
- debug ("PCI-EXPRESS 1: %s \n",
- pex1_agent ? "Agent" : "Host");
- debug("0x%08x=0x%08x ", &pex1->pme_msg_det,pex1->pme_msg_det);
- if (pex1->pme_msg_det) {
- pex1->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",
- pex1->pme_msg_det);
- }
- debug ("\n");
- } else {
- printf ("PCI-EXPRESS 1: Disabled\n");
- }
+ volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_pex_t *pex1 = &immap->im_pex1;
+
+ uint devdisr = gur->devdisr;
+ uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
+ uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
+ uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
+
+ if ((io_sel == 2 || io_sel == 3 || io_sel == 5
+ || io_sel == 6 || io_sel == 7 || io_sel == 0xF)
+ && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
+ debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
+ debug("0x%08x=0x%08x ", &pex1->pme_msg_det, pex1->pme_msg_det);
+ if (pex1->pme_msg_det) {
+ pex1->pme_msg_det = 0xffffffff;
+ debug(" with errors. Clearing. Now 0x%08x",
+ pex1->pme_msg_det);
+ }
+ debug ("\n");
+ } else {
+ puts("PCI-EXPRESS 1: Disabled\n");
+ }
#else
- printf("PCI-EXPRESS1: Disabled\n");
+ puts("PCI-EXPRESS1: Disabled\n");
#endif
return 0;
initdram(int board_type)
{
long dram_size = 0;
- extern long spd_sdram (void);
#if defined(CONFIG_SPD_EEPROM)
dram_size = spd_sdram ();
puts(" DDR: ");
return dram_size;
#endif
-
+
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize and enable DDR ECC.
uint *pend = (uint *) CFG_MEMTEST_END;
uint *p;
- printf("SDRAM test phase 1:\n");
+ puts("SDRAM test phase 1:\n");
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
}
}
- printf("SDRAM test phase 2:\n");
+ puts("SDRAM test phase 2:\n");
for (p = pstart; p < pend; p++)
*p = 0x55555555;
}
}
- printf("SDRAM test passed.\n");
+ puts("SDRAM test passed.\n");
return 0;
}
#endif
ddr->sdram_mode_1 = CFG_DDR_MODE_1;
ddr->sdram_mode_2 = CFG_DDR_MODE_2;
ddr->sdram_interval = CFG_DDR_INTERVAL;
- ddr->sdram_data_init = CFG_DDR_DATA_INIT;
+ ddr->sdram_data_init = CFG_DDR_DATA_INIT;
ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
- ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
+ ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS;
#if defined (CONFIG_DDR_ECC)
ddr->err_sbe = 0x00ff0000;
#endif
asm("sync;isync");
-
+
udelay(500);
#if defined (CONFIG_DDR_ECC)
ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
#endif
asm("sync; isync");
-
+
udelay(500);
#endif
return CFG_SDRAM_SIZE * 1024 * 1024;
int len;
ft_cpu_setup(blob, bd);
-
+
p = ft_get_prop(blob, "/memory/reg", &len);
if (p != NULL) {
*p++ = cpu_to_be32(bd->bi_memstart);
*p = cpu_to_be32(bd->bi_memsize);
}
-
}
#endif
ulong val;
ulong corepll;
- if (argc > 1) {
- cmd = argv[1][1];
- switch (cmd) {
- case 'f': /* reset with frequency changed */
- if (argc < 5)
- goto my_usage;
- read_from_px_regs(0);
+ /*
+ * No args is a simple reset request.
+ */
+ if (argv <= 0) {
+ out8(PIXIS_BASE + PIXIS_RST, 0);
+ /* not reached */
+ }
+
+ cmd = argv[1][1];
+ switch (cmd) {
+ case 'f': /* reset with frequency changed */
+ if (argc < 5)
+ goto my_usage;
+ read_from_px_regs(0);
+
+ val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));
+
+ corepll = strfractoint(argv[3]);
+ val = val + set_px_corepll(corepll);
+ val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
+ if (val == 3) {
+ puts("Setting registers VCFGEN0 and VCTL\n");
+ read_from_px_regs(1);
+ puts("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
+ set_px_go();
+ } else
+ goto my_usage;
- val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));
+ while (1); /* Not reached */
- corepll = strfractoint(argv[3]);
+ case 'l':
+ if (argv[2][1] == 'f') {
+ read_from_px_regs(0);
+ read_from_px_regs_altbank(0);
+ /* reset with frequency changed */
+ val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));
+
+ corepll = strfractoint(argv[4]);
val = val + set_px_corepll(corepll);
- val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
+ val = val + set_px_mpxpll(simple_strtoul(argv[5], NULL, 10));
if (val == 3) {
- printf("Setting registers VCFGEN0 and VCTL\n");
+ puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
+ set_altbank();
read_from_px_regs(1);
- printf("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
- set_px_go();
+ read_from_px_regs_altbank(1);
+ puts("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
+ set_px_go_with_watchdog();
} else
goto my_usage;
- while (1); /* Not reached */
-
- case 'l':
- if (argv[2][1] == 'f') {
- read_from_px_regs(0);
- read_from_px_regs_altbank(0);
- /* reset with frequency changed */
- val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));
-
- corepll = strfractoint(argv[4]);
- val = val + set_px_corepll(corepll);
- val = val + set_px_mpxpll(simple_strtoul(argv[5], NULL, 10));
- if (val == 3) {
- printf("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
- set_altbank();
- read_from_px_regs(1);
- read_from_px_regs_altbank(1);
- printf("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
- set_px_go_with_watchdog();
- } else
- goto my_usage;
-
- while(1); /* Not reached */
-
- } else if(argv[2][1] == 'd'){
- /* Reset from next bank without changing frequencies but with watchdog timer enabled */
- read_from_px_regs(0);
- read_from_px_regs_altbank(0);
- printf("Setting registers VCFGEN1, VBOOT, and VCTL\n");
- set_altbank();
- read_from_px_regs_altbank(1);
- printf("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
- set_px_go_with_watchdog();
- while(1); /* Not reached */
-
- } else {
- /* Reset from next bank without changing frequency and without watchdog timer enabled */
- read_from_px_regs(0);
- read_from_px_regs_altbank(0);
- if(argc > 2)
- goto my_usage;
- printf("Setting registers VCFGNE1, VBOOT, and VCTL\n");
- set_altbank();
- read_from_px_regs_altbank(1);
- printf("Resetting board to boot from the other bank....\n");
- set_px_go();
- }
+ while(1); /* Not reached */
- default:
- goto my_usage;
+ } else if(argv[2][1] == 'd'){
+ /*
+ * Reset from alternate bank without changing
+ * frequencies but with watchdog timer enabled.
+ */
+ read_from_px_regs(0);
+ read_from_px_regs_altbank(0);
+ puts("Setting registers VCFGEN1, VBOOT, and VCTL\n");
+ set_altbank();
+ read_from_px_regs_altbank(1);
+ puts("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
+ set_px_go_with_watchdog();
+ while(1); /* Not reached */
+
+ } else {
+ /*
+ * Reset from next bank without changing
+ * frequency and without watchdog timer enabled.
+ */
+ read_from_px_regs(0);
+ read_from_px_regs_altbank(0);
+ if(argc > 2)
+ goto my_usage;
+ puts("Setting registers VCFGNE1, VBOOT, and VCTL\n");
+ set_altbank();
+ read_from_px_regs_altbank(1);
+ puts("Resetting board to boot from the other bank....\n");
+ set_px_go();
}
- my_usage:
- printf("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
- printf(" reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
- printf("For example: reset cf 40 2.5 10\n");
- printf("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
- return;
+ default:
+ goto my_usage;
+ }
- } else
- out8(PIXIS_BASE+PIXIS_RST,0);
+ my_usage:
+ puts("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
+ puts(" reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
+ puts(" reset altbank [wd]\n");
+ puts("For example: reset cf 40 2.5 10\n");
+ puts("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
}
projects / u-boot / commitdiff