]> git.sur5r.net Git - u-boot/commitdiff
mpc85xx: Base emulator support
authorYork Sun <yorksun@freescale.com>
Tue, 25 Jun 2013 18:37:41 +0000 (11:37 -0700)
committerYork Sun <yorksun@freescale.com>
Fri, 9 Aug 2013 19:41:38 +0000 (12:41 -0700)
Prepare for emulator support for mpc85xx parts.
Disable DDR training and skip wrlvl_cntl_2 and wrlvl_cntl_3 registers.
These two registers improve stability but not supported by emulator.
Add CONFIG_FSL_TBCLK_EXTRA_DIV for possible adjustment to time base.

Signed-off-by: York Sun <yorksun@freescale.com>
README
arch/powerpc/cpu/mpc85xx/cpu_init.c
arch/powerpc/cpu/mpc85xx/ddr-gen3.c
arch/powerpc/cpu/mpc85xx/fdt.c
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c

diff --git a/README b/README
index a5c3e8dcf7f349badd7295f261ea3dcf7a51c748..5fb4c759112e83fab29f84b87fb098f0428f74b7 100644 (file)
--- a/README
+++ b/README
@@ -413,6 +413,10 @@ The following options need to be configured:
                CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
                This value denotes start offset of DSP CCSR space.
 
+               CONFIG_SYS_FSL_DDR_EMU
+               Specify emulator support for DDR. Some DDR features such as
+               deskew training are not available.
+
 - Generic CPU options:
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
index 25beda233eebe4208a708736ff13e18623fb51b8..1774462a420d57676703653f95aa6ed5af1e7ba2 100644 (file)
@@ -532,8 +532,10 @@ skip_l2:
 
        enable_cpc();
 
+#ifndef CONFIG_SYS_FSL_NO_SERDES
        /* needs to be in ram since code uses global static vars */
        fsl_serdes_init();
+#endif
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_A005871
        if (IS_SVR_REV(svr, 1, 0)) {
index c5b47200e08b017c95c58b78cb03664ece50cc33..3e7a56489f9485bc7873febff64a251a28678a01 100644 (file)
@@ -123,10 +123,17 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
        out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
        out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
+#ifndef CONFIG_SYS_FSL_DDR_EMU
+       /*
+        * Skip these two registers if running on emulator
+        * because emulator doesn't have skew between bytes.
+        */
+
        if (regs->ddr_wrlvl_cntl_2)
                out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
        if (regs->ddr_wrlvl_cntl_3)
                out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
+#endif
 
        out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
        out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
index cfaa2edcedb510cb9764fb3fe644373cfbeec14a..84bb8fab8fe7f9ce7fe651c04a79092fdeb61612 100644 (file)
@@ -604,8 +604,12 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 
        fdt_add_enet_stashing(blob);
 
+#ifndef CONFIG_FSL_TBCLK_EXTRA_DIV
+#define CONFIG_FSL_TBCLK_EXTRA_DIV 1
+#endif
        do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-               "timebase-frequency", get_tbclk(), 1);
+               "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV,
+               1);
        do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
                "bus-frequency", bd->bi_busfreq, 1);
        get_sys_info(&sysinfo);
index ff5812df55fbb0b925f7b034e2119b24d2d35165..0f73e9c6c6ec8abd525126cb9f9e581d8d885b9b 100644 (file)
@@ -1638,5 +1638,10 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 
        set_ddr_sdram_rcw(ddr, popts, common_dimm);
 
+#ifdef CONFIG_SYS_FSL_DDR_EMU
+       /* disble DDR training for emulator */
+       ddr->debug[2] = 0x00000400;
+       ddr->debug[4] = 0xff800000;
+#endif
        return check_fsl_memctl_config_regs(ddr);
 }