#include <common.h>
 
 #if defined(CONFIG_CMD_NAND)
-#if !defined(CFG_NAND_LEGACY)
+#if !defined(CONFIG_NAND_LEGACY)
 
 #include <nand.h>
 #include <asm/arch/pxa-regs.h>
 
 #include <command.h>
 #include <image.h>
 #include <asm/byteorder.h>
-#if defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_NAND_LEGACY)
 #include <linux/mtd/nand_legacy.h>
 #endif
 #include <fat.h>
 extern int flash_sect_protect (int, ulong, ulong);
 extern int flash_write (char *, ulong, ulong);
 
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
 /* references to names in cmd_nand.c */
 #define NANDRW_READ    0x01
 #define NANDRW_WRITE   0x00
        int off, rc;
        uint nbytes;
        int k;
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
        int total;
 #endif
 
                        debug ("flash_sect_erase(%lx, %lx);\n", start, end);
                        flash_sect_erase (start, end);
                } else {
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
                        printf ("Updating NAND FLASH with image %s\n",
                                au_image[i].name);
                        debug ("nand_legacy_erase(%lx, %lx);\n", start, end);
                        rc = flash_write ((char *)addr, start,
                                          (nbytes + 1) & ~1);
                } else {
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
                        debug ("nand_legacy_rw(%p, %lx, %x)\n",
                               addr, start, nbytes);
                        rc = nand_legacy_rw (nand_dev_desc,
                        rc = crc32 (0, (uchar *)(start + off),
                                    image_get_data_size (hdr));
                } else {
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
                        rc = nand_legacy_rw (nand_dev_desc,
                                             NANDRW_READ | NANDRW_JFFS2 |
                                             NANDRW_JFFS2_SKIP,
 
        return 0;
 }
 
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
 
 #include <linux/mtd/nand_legacy.h>
 
 
 #include <cramfs/cramfs_fs.h>
 
 #if defined(CONFIG_CMD_NAND)
-#ifdef CFG_NAND_LEGACY
+#ifdef CONFIG_NAND_LEGACY
 #include <linux/mtd/nand_legacy.h>
-#else /* !CFG_NAND_LEGACY */
+#else /* !CONFIG_NAND_LEGACY */
 #include <linux/mtd/nand.h>
 #include <nand.h>
-#endif /* !CFG_NAND_LEGACY */
+#endif /* !CONFIG_NAND_LEGACY */
 #endif
 /* enable/disable debugging messages */
 #define        DEBUG_JFFS
                }
        }
 
-#ifdef CFG_NAND_LEGACY
+#ifdef CONFIG_NAND_LEGACY
        jffs2_free_cache(part);
 #endif
        list_del(&part->link);
        list_for_each_safe(entry, n, head) {
                part_tmp = list_entry(entry, struct part_info, link);
 
-#ifdef CFG_NAND_LEGACY
+#ifdef CONFIG_NAND_LEGACY
                jffs2_free_cache(part_tmp);
 #endif
                list_del(entry);
        } else if (type == MTD_DEV_TYPE_NAND) {
 #if defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)
                if (num < CFG_MAX_NAND_DEVICE) {
-#ifndef CFG_NAND_LEGACY
+#ifndef CONFIG_NAND_LEGACY
                        *size = nand_info[num].size;
 #else
                        extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
 
 #include <common.h>
 
 
-#ifndef CFG_NAND_LEGACY
+#ifndef CONFIG_NAND_LEGACY
 /*
  *
  * New NAND support
 
 #endif
 
-#else /* CFG_NAND_LEGACY */
+#else /* CONFIG_NAND_LEGACY */
 /*
  *
  * Legacy NAND support - to be phased out
 
 #endif
 
-#endif /* CFG_NAND_LEGACY */
+#endif /* CONFIG_NAND_LEGACY */
 
 #endif
 
 #if defined(CONFIG_CMD_NAND)
-#if !defined(CFG_NAND_LEGACY)
+#if !defined(CONFIG_NAND_LEGACY)
 
 #include <nand.h>
 #include <s3c2410.h>
 
 #include <asm/io.h>
 
 #ifdef CFG_USE_NAND
-#if !defined(CFG_NAND_LEGACY)
+#if !defined(CONFIG_NAND_LEGACY)
 
 #include <nand.h>
 #include <asm/arch/nand_defs.h>
 
 
 #include <common.h>
 
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
+#if defined(CONFIG_CMD_NAND) && !defined(CONFIG_NAND_LEGACY) && \
        (defined(CONFIG_440EP) || defined(CONFIG_440GR) ||           \
         defined(CONFIG_440EPX) || defined(CONFIG_440GRX) ||         \
         defined(CONFIG_405EZ) || defined(CONFIG_405EX) ||           \
 
 The old NAND handling code has been re-factored and is now confined
 to only board-specific files and - unfortunately - to the DoC code
 (see below). A new configuration variable has been introduced:
-CFG_NAND_LEGACY, which has to be defined in the board config file if
+CONFIG_NAND_LEGACY, which has to be defined in the board config file if
 that board uses legacy code.
 
 The necessary changes have been made to all affected boards, and no
 
 
 LIB    := $(obj)libnand.a
 
+ifdef CONFIG_CMD_NAND
+ifndef CONFIG_NAND_LEGACY
 COBJS-y += nand.o
 COBJS-y += nand_base.o
-COBJS-y += nand_ids.o
-COBJS-y += nand_ecc.o
 COBJS-y += nand_bbt.o
+COBJS-y += nand_ecc.o
+COBJS-y += nand_ids.o
 COBJS-y += nand_util.o
+endif
 
 COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
-COBJS-y += fsl_upm.o
+COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
+endif
 
 COBJS  := $(COBJS-y)
 SRCS   := $(COBJS:.o=.c)
 
 
 #include <common.h>
 
-#if !defined(CFG_NAND_LEGACY)
+#if !defined(CONFIG_NAND_LEGACY)
 
 #include <linux/kernel.h>
 #include <linux/init.h>
 
  */
 
 #include <config.h>
-
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_FSL_UPM)
 #include <common.h>
 #include <asm/io.h>
 #include <asm/errno.h>
 
        return 0;
 }
-#endif /* CONFIG_CMD_NAND */
 
  */
 
 #include <common.h>
-
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
-
 #include <nand.h>
 
 #ifndef CFG_NAND_BASE_LIST
        board_nand_select_device(nand_info[nand_curr_device].priv, nand_curr_device);
 #endif
 }
-
-#endif
 
 
 #define ENOTSUPP       524     /* Operation is not supported */
 
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
-
 #include <malloc.h>
 #include <watchdog.h>
 #include <linux/err.h>
 MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
 MODULE_DESCRIPTION("Generic NAND flash driver code");
 #endif
-
-#endif
-
 
  */
 
 #include <common.h>
-
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
-
 #include <malloc.h>
 #include <linux/mtd/compat.h>
 #include <linux/mtd/mtd.h>
 EXPORT_SYMBOL(nand_scan_bbt);
 EXPORT_SYMBOL(nand_default_bbt);
 #endif
-
-#endif
 
 
 #include <common.h>
 
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
-
 /* XXX U-BOOT XXX */
 #if 0
 #include <linux/types.h>
 #if 0
 EXPORT_SYMBOL(nand_correct_data);
 #endif
-
-#endif
 
  */
 
 #include <common.h>
-
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
-
 #include <linux/mtd/nand.h>
 /*
 *      Chip ID list
        {NAND_MFR_MICRON, "Micron"},
        {0x0, "Unknown"}
 };
-#endif
 
  */
 
 #include <common.h>
-
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
-
 #include <command.h>
 #include <watchdog.h>
 #include <malloc.h>
 
        return 0;
 }
-
-#endif /* defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) */
 
 #include <asm/io.h>
 #include <watchdog.h>
 
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
 
 #include <linux/mtd/nand_legacy.h>
 #include <linux/mtd/nand_ids.h>
 
 
 #if (defined(CONFIG_JFFS2_NAND) && \
      defined(CONFIG_CMD_NAND) )
-#if defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_NAND_LEGACY)
 #include <linux/mtd/nand_legacy.h>
 #else
 #include <nand.h>
  *
  */
 
-#if defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_NAND_LEGACY)
 /* this one defined in nand_legacy.c */
 int read_jffs2_nand(size_t start, size_t len,
                size_t * retlen, u_char * buf, int nanddev);
                                }
                        }
 
-#if defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_NAND_LEGACY)
                        if (read_jffs2_nand(nand_cache_off, NAND_CACHE_SIZE,
                                                &retlen, nand_cache, id->num) < 0 ||
                                        retlen != NAND_CACHE_SIZE) {
 
 #include <common.h>
 
-#if !defined(CFG_NAND_LEGACY) && defined(CONFIG_CMD_JFFS2)
+#if !defined(CONFIG_NAND_LEGACY) && defined(CONFIG_CMD_JFFS2)
 
 #include <malloc.h>
 #include <linux/stat.h>
 
 
 
 /* CONFIG_CMD_DOC required legacy NAND support */
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 #if 0
 #define CONFIG_PCI             1
 
 #endif
 
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 /*
  * Miscellaneous configurable options
 
 #define CFG_FPGA_PROG_FEEDBACK
 
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 /*
  * Verbose help from command monitor.
 
  */
 #if defined(CONFIG_CMD_NAND)
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 #define CFG_NAND0_BASE 0xE1000000
 
 #define CFG_MAX_NAND_DEVICE     1       /* Max number of NAND devices           */
 
 #endif
 
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 #define         CFG_HUSH_PARSER
 #define         CFG_PROMPT_HUSH_PS2 "> "
 
 /****************************************************************/
 
 /* NAND */
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 #define CFG_NAND_BASE          NAND_BASE
 #define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
 /****************************************************************/
 
 /* NAND */
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 #define CFG_NAND_BASE                  NAND_BASE
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_MTD_NAND_UNSAFE
 
 /****************************************************************/
 
 /* NAND */
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 #define CFG_NAND_BASE          NAND_BASE
 #define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
 
 /*****************************************************************************/
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
 
 
 #define CONFIG_PCI             1
 #define CONFIG_PCI_PNP         1       /* PCI plug-and-play */
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 /*
  * Miscellaneous configurable options
 
 #define CONFIG_PCI             1
 #define CONFIG_PCI_PNP         1       /* PCI plug-and-play */
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 /*
  * Miscellaneous configurable options
 
 #define CONFIG_CMD_BSP
 
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 #define         CFG_HUSH_PARSER
 #define         CFG_PROMPT_HUSH_PS2 "> "
 
 
 #if !defined(CONFIG_BOOT_ROM)
 /* DoC requires legacy NAND for now */
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 #endif
 
 
 
 #endif
 
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 /*
  * Disk-On-Chip configuration
 
 /*
  * Disk-On-Chip configuration
  */
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 #define CFG_DOC_SHORT_TIMEOUT
 #define CFG_MAX_DOC_DEVICE     1       /* Max number of DOC devices    */
 
 */
 
 /* NAND flash support */
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 #define CONFIG_MTD_NAND_ECC_JFFS2
 #define CFG_MAX_NAND_DEVICE    1       /* Max number of NAND devices   */
 #define SECTORSIZE 512
 
 /* NAND FLASH */
 #ifdef CONFIG_NAND
 
-#undef CFG_NAND_LEGACY
+#undef CONFIG_NAND_LEGACY
 
 #define CONFIG_NAND_FSL_UPM    1
 
 
  */
 #if defined(CONFIG_CMD_NAND)
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 #define CFG_MAX_NAND_DEVICE    1       /* Max number of NAND devices           */
 #define SECTORSIZE 512
 
 
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 #define CFG_MAX_NAND_DEVICE    1       /* Max number of NAND devices           */
 #define SECTORSIZE 512
 
 /*
  * NAND Flash
  */
-#undef CFG_NAND_LEGACY
+#undef CONFIG_NAND_LEGACY
 
 #define CFG_NAND0_BASE         0x0 /* 0x43100040 */ /* 0x10000000 */
 #undef CFG_NAND1_BASE
 
 /*
  *  Board NAND Info.
  */
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 #define CFG_NAND_ADDR 0x04000000  /* physical address to access nand at CS0*/
 
 #define CFG_MAX_NAND_DEVICE 1  /* Max number of NAND devices */
 
 /****************************************************************/
 
 /* NAND */
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 #define CFG_NAND_BASE          NAND_BASE
 #define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
 #define CONFIG_CMD_DATE
 
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 /*
  * Miscellaneous configurable options
 
 #ifndef __LINUX_MTD_NAND_IDS_H
 #define __LINUX_MTD_NAND_IDS_H
 
-#ifndef CFG_NAND_LEGACY
+#ifndef CONFIG_NAND_LEGACY
 #error This module is for the legacy NAND support
 #endif
 
 
 #ifndef __LINUX_MTD_NAND_LEGACY_H
 #define __LINUX_MTD_NAND_LEGACY_H
 
-#ifndef CFG_NAND_LEGACY
+#ifndef CONFIG_NAND_LEGACY
 #error This module is for the legacy NAND support
 #endif
 
 
 
 extern void nand_init(void);
 
-#ifndef CFG_NAND_LEGACY
+#ifndef CONFIG_NAND_LEGACY
 #include <linux/mtd/compat.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 
 __attribute__((noreturn)) void nand_boot(void);
 
-#endif /* !CFG_NAND_LEGACY */
+#endif /* !CONFIG_NAND_LEGACY */
 #endif
 
 
 #if defined(CONFIG_CMD_JFFS2) || \
        (defined(CONFIG_CMD_NAND) \
-       && !defined(CFG_NAND_LEGACY))
+       && !defined(CONFIG_NAND_LEGACY))
 
 /* No ones complement version. JFFS2 (and other things ?)
  * don't use ones compliment in their CRC calculations.