#define CONFIG_PREBOOT ""
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_DRIVE_SATA "sata "
+#ifdef CONFIG_CMD_MMC
+#define DISTRO_BOOT_DEV_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
#else
-#define CONFIG_DRIVE_SATA
+#define DISTRO_BOOT_DEV_MMC(func)
#endif
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_DRIVE_MMC "mmc "
+#ifdef CONFIG_CMD_SATA
+#define DISTRO_BOOT_DEV_SATA(func) func(SATA, sata, 0)
#else
-#define CONFIG_DRIVE_MMC
+#define DISTRO_BOOT_DEV_SATA(func)
#endif
#ifdef CONFIG_USB_STORAGE
-#define CONFIG_DRIVE_USB "usb "
+#define DISTRO_BOOT_DEV_USB(func) func(USB, usb, 0)
#else
-#define CONFIG_DRIVE_USB
+#define DISTRO_BOOT_DEV_USB(func)
+#endif
+
+#ifdef CONFIG_CMD_PXE
+#define DISTRO_BOOT_DEV_PXE(func) func(PXE, pxe, na)
+#else
+#define DISTRO_BOOT_DEV_PXE(func)
+#endif
+
+#ifdef CONFIG_CMD_DHCP
+#define DISTRO_BOOT_DEV_DHCP(func) func(DHCP, dhcp, na)
+#else
+#define DISTRO_BOOT_DEV_DHCP(func)
#endif
-#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
-#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
#if defined(CONFIG_SABRELITE)
+#define FDTFILE "fdtfile=imx6q-sabrelite.dtb\0"
+#else
+/* FIXME: nitrogen6x covers multiple configs. Define fdtfile for each supported config. */
+#define FDTFILE
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+ DISTRO_BOOT_DEV_MMC(func) \
+ DISTRO_BOOT_DEV_SATA(func) \
+ DISTRO_BOOT_DEV_USB(func) \
+ DISTRO_BOOT_DEV_PXE(func) \
+ DISTRO_BOOT_DEV_DHCP(func)
+
+#include <config_distro_bootcmd.h>
+
#define CONFIG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "uimage=uImage\0" \
"console=ttymxc1\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
- "fdt_file=imx6q-sabrelite.dtb\0" \
- "fdt_addr=0x18000000\0" \
- "boot_fdt=try\0" \
+ "fdt_addr_r=0x18000000\0" \
+ FDTFILE \
+ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+ "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+ "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+ "ramdisk_addr_r=0x13000000\0" \
+ "ramdiskaddr=0x13000000\0" \
"ip_dyn=yes\0" \
"usb_pgood_delay=2000\0" \
- "mmcdevs=0 1\0" \
- "mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadbootscript=" \
- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
- "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootm; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootm; " \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${uimage}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootm; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootm; " \
- "fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
- "for mmcdev in ${mmcdevs}; do " \
- "mmc dev ${mmcdev}; " \
- "if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "fi; " \
- "fi; " \
- "fi; " \
- "done; " \
- "run netboot; "
-#else
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
- "umsdevs=" CONFIG_UMSDEVS "\0" \
- "usb_pgood_delay=2000\0" \
- "console=ttymxc1\0" \
- "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
- "sf erase 0xc0000 0x2000 && " \
- "echo restored environment to factory default ; fi\0" \
- "bootcmd=for dtype in ${bootdevs}" \
- "; do " \
- "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
- "usb start ;" \
- "fi; " \
- "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
- "load " \
- "${dtype} ${disk}:1 " \
- "10008000 " \
- "/6x_bootscript" \
- "&& source 10008000 ; " \
- "done ; " \
- "done; " \
- "setenv stdout serial,vga ; " \
- "echo ; echo 6x_bootscript not found ; " \
- "echo ; echo serial console at 115200, 8N1 ; echo ; " \
- "echo details at http://boundarydevices.com/6q_bootscript ; " \
- "setenv stdout serial;" \
- "setenv stdin serial,usbkbd;" \
- "for dtype in ${umsdevs} ; do " \
- "if itest.s sata == ${dtype}; then " \
- "initcmd='sata init' ;" \
- "else " \
- "initcmd='mmc rescan' ;" \
- "fi; " \
- "for disk in 0 1 ; do " \
- "if $initcmd && $dtype dev $disk ; then " \
- "setenv stdout serial,vga; " \
- "echo expose ${dtype} ${disk} " \
- "over USB; " \
- "ums 0 $dtype $disk ;" \
- "fi; " \
- " done; " \
- "done ;" \
- "setenv stdout serial,vga; " \
- "echo no block devices found;" \
- "\0" \
- "initrd_high=0xffffffff\0" \
- "upgradeu=for dtype in ${bootdevs}" \
- "; do " \
- "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
- "load ${dtype} ${disk}:1 10008000 " \
- "/6x_upgrade " \
- "&& source 10008000 ; " \
- "done ; " \
- "done\0" \
+ BOOTENV
-#endif
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x10010000
projects / u-boot / commitdiff