select CPU_V7
select SUPPORT_SPL
+config ARM64_SUPPORT_AARCH32
+ bool "ARM64 system support AArch32 execution state"
+ default y if ARM64 && !TARGET_THUNDERX_88XX
+ help
+ This ARM64 system supports AArch32 execution state.
+
choice
prompt "Target select"
default TARGET_HIKEY
select ARCH_SUPPORT_PSCI
select LS1_DEEP_SLEEP
+config TARGET_LS1021AIOT
+ bool "Support ls1021aiot"
+ select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
+ select SUPPORT_SPL
+ select ARCH_LS1021A
+ select ARCH_SUPPORT_PSCI
+ help
+ Support for Freescale LS1021AIOT platform.
+ The LS1021A Freescale board (IOT) is a high-performance
+ development platform that supports the QorIQ LS1021A
+ Layerscape Architecture processor.
+
config TARGET_LS1043AQDS
bool "Support ls1043aqds"
select ARCH_LS1043A
source "board/freescale/ls1021aqds/Kconfig"
source "board/freescale/ls1043aqds/Kconfig"
source "board/freescale/ls1021atwr/Kconfig"
+source "board/freescale/ls1021aiot/Kconfig"
source "board/freescale/ls1046aqds/Kconfig"
source "board/freescale/ls1043ardb/Kconfig"
source "board/freescale/ls1046ardb/Kconfig"
}
#endif
-static inline u32 initiator_type(u32 cluster, int init_id)
+u32 initiator_type(u32 cluster, int init_id)
{
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
return -1; /* cannot identify the cluster */
}
+#ifndef CONFIG_FSL_LSCH3
uint get_svr(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
return gur_in32(&gur->svr);
}
+#endif
#ifdef CONFIG_DISPLAY_CPUINFO
int print_cpuinfo(void)
#endif
#ifdef CONFIG_LS2080A
u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
+ u32 svr_dev_id;
#endif
#ifdef COUNTER_FREQUENCY_REAL
unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
* Register (PCTBENR), which allows the watchdog to operate.
*/
setbits_le32(pctbenr, 0xff);
+ /*
+ * For LS2080A SoC and its personalities, timer controller
+ * offset is different
+ */
+ svr_dev_id = get_svr() >> 16;
+ if (svr_dev_id == SVR_DEV_LS2080A)
+ cntcr = (u32 *)SYS_FSL_LS2080A_LS2085A_TIMER_ADDR;
+
#endif
/* Enable clock for timer
*/
int fsl_qoriq_core_to_cluster(unsigned int core);
+u32 initiator_type(u32 cluster, int init_id);
u32 cpu_mask(void);
--- /dev/null
+QSPI Boot source support Overview
+-------------------
+ 1. LS1043A
+ LS1043AQDS
+ 2. LS2080A
+ LS2080AQDS
+ 3. LS1012A
+ LS1012AQDS
+ LS1012ARDB
+ 4. LS1046A
+ LS1046AQDS
+ LS1046ARDB
+
+Booting from QSPI
+-------------------
+Booting from QSPI requires two images, RCW and u-boot-dtb.bin.
+The difference between QSPI boot RCW image and NOR boot image is the PBI
+command sequence for setting the boot location pointer. It's should point
+to the address for u-boot in QSPI flash.
+
+RCW image should be written to the beginning of QSPI flash device.
+Example of using u-boot command
+
+=> sf probe 0:0
+SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
+=> sf erase 0 +<size of rcw image>
+SF: 65536 bytes @ 0x0 Erased: OK
+=> sf write <rcw image in memory> 0 <size of rcw image>
+SF: 164 bytes @ 0x0 Written: OK
+
+To get the QSPI image, build u-boot with QSPI config, for example,
+<board_name>_qspi_defconfig. The image needed is u-boot-dtb.bin.
+The u-boot image should be written to 0x10000(but 0x1000 for LS1043A, LS2080A).
+
+=> sf probe 0:0
+SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
+=> sf erase 10000 +<size of u-boot image>
+SF: 589824 bytes @ 0x10000 Erased: OK
+=> sf write <u-boot image in memory> 10000 <size of u-boot image>
+SF: 580966 bytes @ 0x10000 Written: OK
+
+With these two images in QSPI flash device, the board can boot from QSPI.
2. LS2080A
3. LS1012A
4. LS1046A
+ 5. LS2088A
LS1043A
---------
- Two DUARTs
- Integrated flash controller (IFC) supporting NAND and NOR flash
- QorIQ platform's trust architecture 2.1
+
+LS2088A
+--------
+The LS2088A integrated multicore processor combines eight ARM Cortex-A72
+processor cores with high-performance data path acceleration logic and network
+and peripheral bus interfaces required for networking, telecom/datacom,
+wireless infrastructure, and mil/aerospace applications.
+
+The LS2088A SoC includes the following function and features:
+
+ - Eight 64-bit ARM Cortex-A72 CPUs
+ - 1 MB platform cache with ECC
+ - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
+ - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
+ the AIOP
+ - Data path acceleration architecture (DPAA2) incorporating acceleration for
+ the following functions:
+ - Packet parsing, classification, and distribution (WRIOP)
+ - Queue and Hardware buffer management for scheduling, packet sequencing, and
+ congestion management, buffer allocation and de-allocation (QBMan)
+ - Cryptography acceleration (SEC) at up to 10 Gbps
+ - RegEx pattern matching acceleration (PME) at up to 10 Gbps
+ - Decompression/compression acceleration (DCE) at up to 20 Gbps
+ - Accelerated I/O processing (AIOP) at up to 20 Gbps
+ - QDMA engine
+ - 16 SerDes lanes at up to 10.3125 GHz
+ - Ethernet interfaces
+ - Up to eight 10 Gbps Ethernet MACs
+ - Up to eight 1 / 2.5 Gbps Ethernet MACs
+ - High-speed peripheral interfaces
+ - Four PCIe 3.0 controllers, one supporting SR-IOV
+ - Additional peripheral interfaces
+ - Two serial ATA (SATA 3.0) controllers
+ - Two high-speed USB 3.0 controllers with integrated PHY
+ - Enhanced secure digital host controller (eSDXC/eMMC)
+ - Serial peripheral interface (SPI) controller
+ - Quad Serial Peripheral Interface (QSPI) Controller
+ - Four I2C controllers
+ - Two DUARTs
+ - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ platform's trust architecture 3.0
+ - Service processor (SP) provides pre-boot initialization and secure-boot
+ capabilities
+
+LS2088A SoC has 3 more similar SoC personalities
+1)LS2048A, few difference w.r.t. LS2088A:
+ a) Four 64-bit ARM v8 Cortex-A72 CPUs
+
+2)LS2084A, few difference w.r.t. LS2088A:
+ a) No AIOP
+ b) No 32-bit DDR3 SDRAM memory
+ c) 5 * 1/10G + 5 *1G WRIOP
+ d) No L2 switch
+
+3)LS2044A, few difference w.r.t. LS2084A:
+ a) Four 64-bit ARM v8 Cortex-A72 CPUs
#ifdef CONFIG_MP
#include <asm/arch/mp.h>
#endif
+#ifdef CONFIG_FSL_LSCH3
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch-fsl-layerscape/soc.h>
+#endif
+#include <asm/u-boot.h>
ENTRY(lowlevel_init)
mov x29, lr /* Save LR */
#endif
#ifdef CONFIG_FSL_TZASC_400
+ /*
+ * LS2080 and its personalities does not support TZASC
+ * So skip TZASC related operations
+ */
+ bl get_svr
+ lsr w0, w0, #16
+ ldr w1, =SVR_DEV_LS2080A
+ cmp w0, w1
+ b.eq 1f
+
/* Set TZASC so that:
* a. We use only Region0 whose global secure write/read is EN
* b. We use only Region0 whose NSAID write/read is EN
* placeholders.
*/
ldr x1, =TZASC_GATE_KEEPER(0)
- ldr x0, [x1] /* Filter 0 Gate Keeper Register */
- orr x0, x0, #1 << 0 /* Set open_request for Filter 0 */
- str x0, [x1]
+ ldr w0, [x1] /* Filter 0 Gate Keeper Register */
+ orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */
+ str w0, [x1]
ldr x1, =TZASC_GATE_KEEPER(1)
- ldr x0, [x1] /* Filter 0 Gate Keeper Register */
- orr x0, x0, #1 << 0 /* Set open_request for Filter 0 */
- str x0, [x1]
+ ldr w0, [x1] /* Filter 0 Gate Keeper Register */
+ orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */
+ str w0, [x1]
ldr x1, =TZASC_REGION_ATTRIBUTES_0(0)
- ldr x0, [x1] /* Region-0 Attributes Register */
- orr x0, x0, #1 << 31 /* Set Sec global write en, Bit[31] */
- orr x0, x0, #1 << 30 /* Set Sec global read en, Bit[30] */
- str x0, [x1]
+ ldr w0, [x1] /* Region-0 Attributes Register */
+ orr w0, w0, #1 << 31 /* Set Sec global write en, Bit[31] */
+ orr w0, w0, #1 << 30 /* Set Sec global read en, Bit[30] */
+ str w0, [x1]
ldr x1, =TZASC_REGION_ATTRIBUTES_0(1)
- ldr x0, [x1] /* Region-1 Attributes Register */
- orr x0, x0, #1 << 31 /* Set Sec global write en, Bit[31] */
- orr x0, x0, #1 << 30 /* Set Sec global read en, Bit[30] */
- str x0, [x1]
+ ldr w0, [x1] /* Region-1 Attributes Register */
+ orr w0, w0, #1 << 31 /* Set Sec global write en, Bit[31] */
+ orr w0, w0, #1 << 30 /* Set Sec global read en, Bit[30] */
+ str w0, [x1]
ldr x1, =TZASC_REGION_ID_ACCESS_0(0)
ldr w0, [x1] /* Region-0 Access Register */
isb
dsb sy
#endif
-
+1:
#ifdef CONFIG_ARCH_LS1046A
/* Initialize the L2 RAM latency */
mrs x1, S3_1_c11_c0_2
ENDPROC(lowlevel_init)
#ifdef CONFIG_FSL_LSCH3
+ .globl get_svr
+get_svr:
+ ldr x1, =FSL_LSCH3_SVR
+ ldr w0, [x1]
+ ret
+
hnf_pstate_poll:
/* x0 has the desired status, return 0 for success, 1 for timeout
* clobber x1, x2, x3, x4, x6, x7
gic_wait_for_interrupt_m x0, w1
#endif
- bl secondary_switch_to_el2
-#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
- bl secondary_switch_to_el1
-#endif
-
slave_cpu:
wfe
ldr x0, [x11]
tbz x1, #25, cpu_is_le
rev x0, x0 /* BE to LE conversion */
cpu_is_le:
- br x0 /* branch to the given address */
+ ldr x5, [x11, #24]
+ ldr x6, =IH_ARCH_DEFAULT
+ cmp x6, x5
+ b.eq 1f
+
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+ adr x3, secondary_switch_to_el1
+ ldr x4, =ES_TO_AARCH64
+#else
+ ldr x3, [x11]
+ ldr x4, =ES_TO_AARCH32
+#endif
+ bl secondary_switch_to_el2
+
+1:
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+ adr x3, secondary_switch_to_el1
+#else
+ ldr x3, [x11]
+#endif
+ ldr x4, =ES_TO_AARCH64
+ bl secondary_switch_to_el2
+
ENDPROC(secondary_boot_func)
ENTRY(secondary_switch_to_el2)
- switch_el x0, 1f, 0f, 0f
+ switch_el x5, 1f, 0f, 0f
0: ret
-1: armv8_switch_to_el2_m x0
+1: armv8_switch_to_el2_m x3, x4, x5
ENDPROC(secondary_switch_to_el2)
ENTRY(secondary_switch_to_el1)
- switch_el x0, 0f, 1f, 0f
+ mrs x0, mpidr_el1
+ ubfm x1, x0, #8, #15
+ ubfm x2, x0, #0, #1
+ orr x10, x2, x1, lsl #2 /* x10 has LPID */
+
+ lsl x1, x10, #6
+ ldr x0, =__spin_table
+ /* physical address of this cpus spin table element */
+ add x11, x1, x0
+
+ ldr x3, [x11]
+
+ ldr x5, [x11, #24]
+ ldr x6, =IH_ARCH_DEFAULT
+ cmp x6, x5
+ b.eq 2f
+
+ ldr x4, =ES_TO_AARCH32
+ bl switch_to_el1
+
+2: ldr x4, =ES_TO_AARCH64
+
+switch_to_el1:
+ switch_el x5, 0f, 1f, 0f
0: ret
-1: armv8_switch_to_el1_m x0, x1
+1: armv8_switch_to_el1_m x3, x4, x5
ENDPROC(secondary_switch_to_el1)
/* Ensure that the literals used by the secondary boot code are
{0x33, {PCIE2, PCIE2, PCIE2, PCIE2, QSGMII_D, QSGMII_C, QSGMII_B,
QSGMII_A} },
{0x35, {QSGMII_D, QSGMII_C, QSGMII_B, PCIE2, XFI4, XFI3, XFI2, XFI1 } },
+ {0x39, {SGMII8, SGMII7, SGMII6, PCIE2, SGMII4, SGMII3, SGMII2,
+ PCIE1 } },
+ {0x4B, {PCIE2, PCIE2, PCIE2, PCIE2, XFI4, XFI3, XFI2, XFI1 } },
+ {0x4C, {XFI8, XFI7, XFI6, XFI5, PCIE1, PCIE1, PCIE1, PCIE1 } },
+ {0x4D, {SGMII8, SGMII7, PCIE2, PCIE2, SGMII4, SGMII3, PCIE1, PCIE1 } },
{}
};
static struct serdes_config serdes2_cfg_tbl[] = {
SATA2 } },
{0x4A, {SGMII9, SGMII10, SGMII11, SGMII12, PCIE4, PCIE4, SATA1,
SATA2 } },
+ {0x57, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SGMII15, SGMII16 } },
{}
};
#include <asm/system.h>
#include <asm/arch/mp.h>
#include <asm/arch/soc.h>
+#include "cpu.h"
+#include <asm/arch-fsl-layerscape/soc.h>
DECLARE_GLOBAL_DATA_PTR;
return (phys_addr_t)&secondary_boot_code;
}
+void update_os_arch_secondary_cores(uint8_t os_arch)
+{
+ u64 *table = get_spin_tbl_addr();
+ int i;
+
+ for (i = 1; i < CONFIG_MAX_CPUS; i++)
+ table[i * WORDS_PER_SPIN_TABLE_ENTRY +
+ SPIN_TABLE_ELEM_OS_ARCH_IDX] = os_arch;
+}
+
+#ifdef CONFIG_FSL_LSCH3
+void wake_secondary_core_n(int cluster, int core, int cluster_cores)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ struct ccsr_reset __iomem *rst = (void *)(CONFIG_SYS_FSL_RST_ADDR);
+ u32 mpidr = 0;
+
+ mpidr = ((cluster << 8) | core);
+ /*
+ * mpidr_el1 register value of core which needs to be released
+ * is written to scratchrw[6] register
+ */
+ gur_out32(&gur->scratchrw[6], mpidr);
+ asm volatile("dsb st" : : : "memory");
+ rst->brrl |= 1 << ((cluster * cluster_cores) + core);
+ asm volatile("dsb st" : : : "memory");
+ /*
+ * scratchrw[6] register value is polled
+ * when the value becomes zero, this means that this core is up
+ * and running, next core can be released now
+ */
+ while (gur_in32(&gur->scratchrw[6]) != 0)
+ ;
+}
+#endif
+
int fsl_layerscape_wake_seconday_cores(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
#ifdef CONFIG_FSL_LSCH3
struct ccsr_reset __iomem *rst = (void *)(CONFIG_SYS_FSL_RST_ADDR);
+ u32 svr, ver, cluster, type;
+ int j = 0, cluster_cores = 0;
#elif defined(CONFIG_FSL_LSCH2)
struct ccsr_scfg __iomem *scfg = (void *)(CONFIG_SYS_FSL_SCFG_ADDR);
#endif
#ifdef CONFIG_FSL_LSCH3
gur_out32(&gur->bootlocptrh, (u32)(gd->relocaddr >> 32));
gur_out32(&gur->bootlocptrl, (u32)gd->relocaddr);
- gur_out32(&gur->scratchrw[6], 1);
- asm volatile("dsb st" : : : "memory");
- rst->brrl = cores;
- asm volatile("dsb st" : : : "memory");
+
+ svr = gur_in32(&gur->svr);
+ ver = SVR_SOC_VER(svr);
+ if (ver == SVR_LS2080A || ver == SVR_LS2085A) {
+ gur_out32(&gur->scratchrw[6], 1);
+ asm volatile("dsb st" : : : "memory");
+ rst->brrl = cores;
+ asm volatile("dsb st" : : : "memory");
+ } else {
+ /*
+ * Release the cores out of reset one-at-a-time to avoid
+ * power spikes
+ */
+ i = 0;
+ cluster = in_le32(&gur->tp_cluster[i].lower);
+ for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+ type = initiator_type(cluster, j);
+ if (type &&
+ TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)
+ cluster_cores++;
+ }
+
+ do {
+ cluster = in_le32(&gur->tp_cluster[i].lower);
+ for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+ type = initiator_type(cluster, j);
+ if (type &&
+ TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)
+ wake_secondary_core_n(i, j,
+ cluster_cores);
+ }
+ i++;
+ } while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
+ }
#elif defined(CONFIG_FSL_LSCH2)
scfg_out32(&scfg->scratchrw[0], (u32)(gd->relocaddr >> 32));
scfg_out32(&scfg->scratchrw[1], (u32)gd->relocaddr);
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 svr = gur_in32(&gur->svr);
- /* LS2085A has DP_DDR */
- if (SVR_SOC_VER(svr) == SVR_LS2085A)
+ /* LS2085A, LS2088A, LS2048A has DP_DDR */
+ if ((SVR_SOC_VER(svr) == SVR_LS2085A) ||
+ (SVR_SOC_VER(svr) == SVR_LS2088A) ||
+ (SVR_SOC_VER(svr) == SVR_LS2048A))
return true;
return false;
return false;
}
-#ifdef CONFIG_LS2080A
+#if defined(CONFIG_FSL_LSCH3)
/*
* This erratum requires setting a value to eddrtqcr1 to
* optimal the DDR performance.
*/
static void erratum_a008336(void)
{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
u32 *eddrtqcr1;
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
#ifdef CONFIG_SYS_FSL_DCSR_DDR_ADDR
eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
if (fsl_ddr_get_version(0) == 0x50200)
*/
static void erratum_a008514(void)
{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
u32 *eddrtqcr1;
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
#ifdef CONFIG_SYS_FSL_DCSR_DDR3_ADDR
eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
out_le32(eddrtqcr1, 0x63b20002);
#endif
#endif
}
+
void bypass_smmu(void)
{
u32 val;
smc #0
ret
ENDPROC(_sec_firmware_support_psci_version)
+
+/*
+ * Switch from AArch64 EL2 to AArch32 EL2
+ * @param inputs:
+ * x0: argument, zero
+ * x1: machine nr
+ * x2: fdt address
+ * x3: kernel entry point
+ * @param outputs for secure firmware:
+ * x0: function id
+ * x1: kernel entry point
+ * x2: machine nr
+ * x3: fdt address
+*/
+ENTRY(armv8_el2_to_aarch32)
+ mov x0, x3
+ mov x3, x2
+ mov x2, x1
+ mov x1, x0
+ ldr x0, =0xc000ff04
+ smc #0
+ ret
+ENDPROC(armv8_el2_to_aarch32)
#endif
/*
* All slaves will enter EL2 and optionally EL1.
*/
+ adr x3, lowlevel_in_el2
+ ldr x4, =ES_TO_AARCH64
bl armv8_switch_to_el2
+
+lowlevel_in_el2:
#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+ adr x3, lowlevel_in_el1
+ ldr x4, =ES_TO_AARCH64
bl armv8_switch_to_el1
+
+lowlevel_in_el1:
#endif
#endif /* CONFIG_ARMV8_MULTIENTRY */
#include <asm/macro.h>
ENTRY(armv8_switch_to_el2)
- switch_el x0, 1f, 0f, 0f
-0: ret
-1: armv8_switch_to_el2_m x0
+ switch_el x5, 1f, 0f, 0f
+0:
+ cmp x4, #ES_TO_AARCH64
+ b.eq 2f
+ /*
+ * When loading 32-bit kernel, it will jump
+ * to secure firmware again, and never return.
+ */
+ bl armv8_el2_to_aarch32
+2:
+ /*
+ * x3 is kernel entry point or switch_to_el1
+ * if CONFIG_ARMV8_SWITCH_TO_EL1 is defined.
+ * When running in EL2 now, jump to the
+ * address saved in x3.
+ */
+ br x3
+1: armv8_switch_to_el2_m x3, x4, x5
ENDPROC(armv8_switch_to_el2)
ENTRY(armv8_switch_to_el1)
- switch_el x0, 0f, 1f, 0f
-0: ret
-1: armv8_switch_to_el1_m x0, x1
+ switch_el x5, 0f, 1f, 0f
+0:
+ /* x3 is kernel entry point. When running in EL1
+ * now, jump to the address saved in x3.
+ */
+ br x3
+1: armv8_switch_to_el1_m x3, x4, x5
ENDPROC(armv8_switch_to_el1)
+
+WEAK(armv8_el2_to_aarch32)
+ ret
+ENDPROC(armv8_el2_to_aarch32)
dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
ls1021a-qds-lpuart.dtb \
- ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb
+ ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
+ ls1021a-iot-duart.dtb
dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
fsl-ls2080a-rdb.dtb
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
fsl-ls1043a-qds-lpuart.dtb \
fsl-ls1043a-rdb.dtb \
fsl-ls1046a-qds-duart.dtb \
+ fsl-ls1046a-qds-lpuart.dtb \
fsl-ls1046a-rdb.dtb \
fsl-ls1012a-qds.dtb \
fsl-ls1012a-rdb.dtb \
--- /dev/null
+/*
+ * Device Tree file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "fsl-ls1046a-qds.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &lpuart0;
+ };
+};
&duart1 {
status = "okay";
};
+
+&lpuart0 {
+ status = "okay";
+};
clocks = <&clockgen 4 0>;
};
+ lpuart0: serial@2950000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2950000 0x0 0x1000>;
+ interrupts = <0 48 0x4>;
+ clocks = <&clockgen 4 0>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart1: serial@2960000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2960000 0x0 0x1000>;
+ interrupts = <0 49 0x4>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart2: serial@2970000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2970000 0x0 0x1000>;
+ interrupts = <0 50 0x4>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart3: serial@2980000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2980000 0x0 0x1000>;
+ interrupts = <0 51 0x4>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart4: serial@2990000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2990000 0x0 0x1000>;
+ interrupts = <0 52 0x4>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart5: serial@29a0000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x29a0000 0x0 0x1000>;
+ interrupts = <0 53 0x4>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
qspi: quadspi@1550000 {
compatible = "fsl,vf610-qspi";
#address-cells = <1>;
--- /dev/null
+/*
+ * Freescale ls1021a IOT board device tree source
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "ls1021a-iot.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart0;
+ };
+};
--- /dev/null
+/*
+ * Freescale ls1021a IOT board device tree source
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+
+#include "ls1021a.dtsi"
+
+/ {
+ model = "LS1021A IOT Board";
+
+ aliases {
+ enet2_rgmii_phy = &rgmii_phy1;
+ enet0_sgmii_phy = &sgmii_phy2;
+ enet1_sgmii_phy = &sgmii_phy0;
+ spi0 = &qspi;
+ spi1 = &dspi1;
+ };
+};
+
+&qspi {
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: n25q128a13@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&dspi1 {
+ bus-num = <0>;
+ status = "okay";
+
+ dspiflash: at26df081a@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <16000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* NOR Flash on board */
+ ranges = <0x0 0x0 0x60000000 0x08000000>;
+ status = "okay";
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+};
+
+&lpuart0 {
+ status = "okay";
+};
+
+&mdio0 {
+ sgmii_phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ sgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ tbi1: tbi-phy@1f {
+ reg = <0x1f>;
+ device_type = "tbi-phy";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
#ifndef L1_CACHE_BYTES
#define L1_CACHE_SHIFT 6
#define L1_CACHE_BYTES BIT(L1_CACHE_SHIFT)
+#define CONFIG_FSL_TZASC_400
#endif
#define CONFIG_SYS_FSL_OCRAM_BASE 0x18000000 /* initial RAM */
CPU_TYPE_ENTRY(LS2080A, LS2080A, 8),
CPU_TYPE_ENTRY(LS2085A, LS2085A, 8),
CPU_TYPE_ENTRY(LS2045A, LS2045A, 4),
+ CPU_TYPE_ENTRY(LS2088A, LS2088A, 8),
+ CPU_TYPE_ENTRY(LS2084A, LS2084A, 8),
+ CPU_TYPE_ENTRY(LS2048A, LS2048A, 4),
+ CPU_TYPE_ENTRY(LS2044A, LS2044A, 4),
CPU_TYPE_ENTRY(LS1043A, LS1043A, 4),
CPU_TYPE_ENTRY(LS1023A, LS1023A, 2),
CPU_TYPE_ENTRY(LS1046A, LS1046A, 4),
#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x01240000)
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011C0500)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011C0600)
-#define CONFIG_SYS_FSL_TIMER_ADDR 0x023d0000
+#define SYS_FSL_LS2080A_LS2085A_TIMER_ADDR 0x023d0000
+#define CONFIG_SYS_FSL_TIMER_ADDR 0x023e0000
#define CONFIG_SYS_FSL_PMU_CLTBENR (CONFIG_SYS_FSL_PMU_ADDR + \
0x18A0)
#define FSL_PMU_PCTBENR_OFFSET (CONFIG_SYS_FSL_PMU_ADDR + 0x8A0)
+#define FSL_LSCH3_SVR (CONFIG_SYS_FSL_GUTS_ADDR + 0xA4)
#define CONFIG_SYS_FSL_WRIOP1_ADDR (CONFIG_SYS_IMMR + 0x7B80000)
#define CONFIG_SYS_FSL_WRIOP1_MDIO1 (CONFIG_SYS_FSL_WRIOP1_ADDR + 0x16000)
#define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */
#define TP_INIT_PER_CLUSTER 4
/* This is chassis generation 3 */
-
+#ifndef __ASSEMBLY__
struct sys_info {
unsigned long freq_processor[CONFIG_MAX_CPUS];
unsigned long freq_systembus;
u32 ip_rev2; /* 0xbfc */
};
-uint get_svr(void);
-
+#endif /*__ASSEMBLY__*/
#endif /* __ARCH_FSL_LSCH3_IMMAP_H_ */
* uint64_t entry_addr;
* uint64_t status;
* uint64_t lpid;
+* uint64_t os_arch;
* };
* we pad this struct to 64 bytes so each entry is in its own cacheline
* the actual spin table is an array of these structures
#define SPIN_TABLE_ELEM_ENTRY_ADDR_IDX 0
#define SPIN_TABLE_ELEM_STATUS_IDX 1
#define SPIN_TABLE_ELEM_LPID_IDX 2
+#define SPIN_TABLE_ELEM_OS_ARCH_IDX 3
#define WORDS_PER_SPIN_TABLE_ENTRY 8 /* pad to 64 bytes */
#define SPIN_TABLE_ELEM_SIZE 64
int is_core_online(u64 cpu_id);
u32 cpu_pos_mask(void);
#endif
+
+#define IH_ARCH_ARM 2 /* ARM */
+#define IH_ARCH_ARM64 22 /* ARM64 */
+
#endif /* _FSL_LAYERSCAPE_MP_H */
#define pex_lut_in32(a) in_be32(a)
#define pex_lut_out32(a, v) out_be32(a, v)
#endif
-
+#ifndef __ASSEMBLY__
struct cpu_type {
char name[15];
u32 soc_ver;
#define CPU_TYPE_ENTRY(n, v, nc) \
{ .name = #n, .soc_ver = SVR_##v, .num_cores = (nc)}
-
+#endif
#define SVR_WO_E 0xFFFFFE
#define SVR_LS1012A 0x870400
#define SVR_LS1043A 0x879200
#define SVR_LS2080A 0x870110
#define SVR_LS2085A 0x870100
#define SVR_LS2040A 0x870130
+#define SVR_LS2088A 0x870900
+#define SVR_LS2084A 0x870910
+#define SVR_LS2048A 0x870920
+#define SVR_LS2044A 0x870930
+
+#define SVR_DEV_LS2080A 0x8701
#define SVR_MAJ(svr) (((svr) >> 4) & 0xf)
#define SVR_MIN(svr) (((svr) >> 0) & 0xf)
#define AHCI_PORT_TRANS_CFG 0x08000029
#define AHCI_PORT_AXICC_CFG 0x3fffffff
+#ifndef __ASSEMBLY__
/* AHCI (sata) register map */
struct ccsr_ahci {
u32 res1[0xa4/4]; /* 0x0 - 0xa4 */
bool soc_has_dp_ddr(void);
bool soc_has_aiop(void);
+#endif
#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ */
#ifndef __ASM_ARM_MACRO_H__
#define __ASM_ARM_MACRO_H__
+
+#ifdef CONFIG_ARM64
+#include <asm/system.h>
+#endif
+
#ifdef __ASSEMBLY__
/*
#endif
.endm
-.macro armv8_switch_to_el2_m, xreg1
- /* 64bit EL2 | HCE | SMD | RES1 (Bits[5:4]) | Non-secure EL0/EL1 */
- mov \xreg1, #0x5b1
- msr scr_el3, \xreg1
+/*
+ * Switch from EL3 to EL2 for ARMv8
+ * @ep: kernel entry point
+ * @flag: The execution state flag for lower exception
+ * level, ES_TO_AARCH64 or ES_TO_AARCH32
+ * @tmp: temporary register
+ *
+ * For loading 32-bit OS, x1 is machine nr and x2 is ftaddr.
+ * For loading 64-bit OS, x0 is physical address to the FDT blob.
+ * They will be passed to the guest.
+ */
+.macro armv8_switch_to_el2_m, ep, flag, tmp
msr cptr_el3, xzr /* Disable coprocessor traps to EL3 */
- mov \xreg1, #0x33ff
- msr cptr_el2, \xreg1 /* Disable coprocessor traps to EL2 */
+ mov \tmp, #CPTR_EL2_RES1
+ msr cptr_el2, \tmp /* Disable coprocessor traps to EL2 */
/* Initialize Generic Timers */
msr cntvoff_el2, xzr
* and RES0 bits (31,30,27,26,24,21,20,17,15-13,10-6) +
* EE,WXN,I,SA,C,A,M to 0
*/
- mov \xreg1, #0x0830
- movk \xreg1, #0x30C5, lsl #16
- msr sctlr_el2, \xreg1
+ ldr \tmp, =(SCTLR_EL2_RES1 | SCTLR_EL2_EE_LE |\
+ SCTLR_EL2_WXN_DIS | SCTLR_EL2_ICACHE_DIS |\
+ SCTLR_EL2_SA_DIS | SCTLR_EL2_DCACHE_DIS |\
+ SCTLR_EL2_ALIGN_DIS | SCTLR_EL2_MMU_DIS)
+ msr sctlr_el2, \tmp
+
+ mov \tmp, sp
+ msr sp_el2, \tmp /* Migrate SP */
+ mrs \tmp, vbar_el3
+ msr vbar_el2, \tmp /* Migrate VBAR */
+
+ /* Check switch to AArch64 EL2 or AArch32 Hypervisor mode */
+ cmp \flag, #ES_TO_AARCH32
+ b.eq 1f
+
+ /*
+ * The next lower exception level is AArch64, 64bit EL2 | HCE |
+ * SMD | RES1 (Bits[5:4]) | Non-secure EL0/EL1.
+ */
+ ldr \tmp, =(SCR_EL3_RW_AARCH64 | SCR_EL3_HCE_EN |\
+ SCR_EL3_SMD_DIS | SCR_EL3_RES1 |\
+ SCR_EL3_NS_EN)
+ msr scr_el3, \tmp
/* Return to the EL2_SP2 mode from EL3 */
- mov \xreg1, sp
- msr sp_el2, \xreg1 /* Migrate SP */
- mrs \xreg1, vbar_el3
- msr vbar_el2, \xreg1 /* Migrate VBAR */
- mov \xreg1, #0x3c9
- msr spsr_el3, \xreg1 /* EL2_SP2 | D | A | I | F */
- msr elr_el3, lr
+ ldr \tmp, =(SPSR_EL_DEBUG_MASK | SPSR_EL_SERR_MASK |\
+ SPSR_EL_IRQ_MASK | SPSR_EL_FIQ_MASK |\
+ SPSR_EL_M_AARCH64 | SPSR_EL_M_EL2H)
+ msr spsr_el3, \tmp
+ msr elr_el3, \ep
+ eret
+
+1:
+ /*
+ * The next lower exception level is AArch32, 32bit EL2 | HCE |
+ * SMD | RES1 (Bits[5:4]) | Non-secure EL0/EL1.
+ */
+ ldr \tmp, =(SCR_EL3_RW_AARCH32 | SCR_EL3_HCE_EN |\
+ SCR_EL3_SMD_DIS | SCR_EL3_RES1 |\
+ SCR_EL3_NS_EN)
+ msr scr_el3, \tmp
+
+ /* Return to AArch32 Hypervisor mode */
+ ldr \tmp, =(SPSR_EL_END_LE | SPSR_EL_ASYN_MASK |\
+ SPSR_EL_IRQ_MASK | SPSR_EL_FIQ_MASK |\
+ SPSR_EL_T_A32 | SPSR_EL_M_AARCH32 |\
+ SPSR_EL_M_HYP)
+ msr spsr_el3, \tmp
+ msr elr_el3, \ep
eret
.endm
-.macro armv8_switch_to_el1_m, xreg1, xreg2
+/*
+ * Switch from EL2 to EL1 for ARMv8
+ * @ep: kernel entry point
+ * @flag: The execution state flag for lower exception
+ * level, ES_TO_AARCH64 or ES_TO_AARCH32
+ * @tmp: temporary register
+ *
+ * For loading 32-bit OS, x1 is machine nr and x2 is ftaddr.
+ * For loading 64-bit OS, x0 is physical address to the FDT blob.
+ * They will be passed to the guest.
+ */
+.macro armv8_switch_to_el1_m, ep, flag, tmp
/* Initialize Generic Timers */
- mrs \xreg1, cnthctl_el2
- orr \xreg1, \xreg1, #0x3 /* Enable EL1 access to timers */
- msr cnthctl_el2, \xreg1
+ mrs \tmp, cnthctl_el2
+ /* Enable EL1 access to timers */
+ orr \tmp, \tmp, #(CNTHCTL_EL2_EL1PCEN_EN |\
+ CNTHCTL_EL2_EL1PCTEN_EN)
+ msr cnthctl_el2, \tmp
msr cntvoff_el2, xzr
/* Initilize MPID/MPIDR registers */
- mrs \xreg1, midr_el1
- mrs \xreg2, mpidr_el1
- msr vpidr_el2, \xreg1
- msr vmpidr_el2, \xreg2
+ mrs \tmp, midr_el1
+ msr vpidr_el2, \tmp
+ mrs \tmp, mpidr_el1
+ msr vmpidr_el2, \tmp
/* Disable coprocessor traps */
- mov \xreg1, #0x33ff
- msr cptr_el2, \xreg1 /* Disable coprocessor traps to EL2 */
+ mov \tmp, #CPTR_EL2_RES1
+ msr cptr_el2, \tmp /* Disable coprocessor traps to EL2 */
msr hstr_el2, xzr /* Disable coprocessor traps to EL2 */
- mov \xreg1, #3 << 20
- msr cpacr_el1, \xreg1 /* Enable FP/SIMD at EL1 */
-
- /* Initialize HCR_EL2 */
- mov \xreg1, #(1 << 31) /* 64bit EL1 */
- orr \xreg1, \xreg1, #(1 << 29) /* Disable HVC */
- msr hcr_el2, \xreg1
+ mov \tmp, #CPACR_EL1_FPEN_EN
+ msr cpacr_el1, \tmp /* Enable FP/SIMD at EL1 */
/* SCTLR_EL1 initialization
*
* UCI,EE,EOE,WXN,nTWE,nTWI,UCT,DZE,I,UMA,SED,ITD,
* CP15BEN,SA0,SA,C,A,M to 0
*/
- mov \xreg1, #0x0800
- movk \xreg1, #0x30d0, lsl #16
- msr sctlr_el1, \xreg1
+ ldr \tmp, =(SCTLR_EL1_RES1 | SCTLR_EL1_UCI_DIS |\
+ SCTLR_EL1_EE_LE | SCTLR_EL1_WXN_DIS |\
+ SCTLR_EL1_NTWE_DIS | SCTLR_EL1_NTWI_DIS |\
+ SCTLR_EL1_UCT_DIS | SCTLR_EL1_DZE_DIS |\
+ SCTLR_EL1_ICACHE_DIS | SCTLR_EL1_UMA_DIS |\
+ SCTLR_EL1_SED_EN | SCTLR_EL1_ITD_EN |\
+ SCTLR_EL1_CP15BEN_DIS | SCTLR_EL1_SA0_DIS |\
+ SCTLR_EL1_SA_DIS | SCTLR_EL1_DCACHE_DIS |\
+ SCTLR_EL1_ALIGN_DIS | SCTLR_EL1_MMU_DIS)
+ msr sctlr_el1, \tmp
+
+ mov \tmp, sp
+ msr sp_el1, \tmp /* Migrate SP */
+ mrs \tmp, vbar_el2
+ msr vbar_el1, \tmp /* Migrate VBAR */
+
+ /* Check switch to AArch64 EL1 or AArch32 Supervisor mode */
+ cmp \flag, #ES_TO_AARCH32
+ b.eq 1f
+
+ /* Initialize HCR_EL2 */
+ ldr \tmp, =(HCR_EL2_RW_AARCH64 | HCR_EL2_HCD_DIS)
+ msr hcr_el2, \tmp
/* Return to the EL1_SP1 mode from EL2 */
- mov \xreg1, sp
- msr sp_el1, \xreg1 /* Migrate SP */
- mrs \xreg1, vbar_el2
- msr vbar_el1, \xreg1 /* Migrate VBAR */
- mov \xreg1, #0x3c5
- msr spsr_el2, \xreg1 /* EL1_SP1 | D | A | I | F */
- msr elr_el2, lr
+ ldr \tmp, =(SPSR_EL_DEBUG_MASK | SPSR_EL_SERR_MASK |\
+ SPSR_EL_IRQ_MASK | SPSR_EL_FIQ_MASK |\
+ SPSR_EL_M_AARCH64 | SPSR_EL_M_EL1H)
+ msr spsr_el2, \tmp
+ msr elr_el2, \ep
+ eret
+
+1:
+ /* Initialize HCR_EL2 */
+ ldr \tmp, =(HCR_EL2_RW_AARCH32 | HCR_EL2_HCD_DIS)
+ msr hcr_el2, \tmp
+
+ /* Return to AArch32 Supervisor mode from EL2 */
+ ldr \tmp, =(SPSR_EL_END_LE | SPSR_EL_ASYN_MASK |\
+ SPSR_EL_IRQ_MASK | SPSR_EL_FIQ_MASK |\
+ SPSR_EL_T_A32 | SPSR_EL_M_AARCH32 |\
+ SPSR_EL_M_SVC)
+ msr spsr_el2, \tmp
+ msr elr_el2, \ep
eret
.endm
#define CR_WXN (1 << 19) /* Write Permision Imply XN */
#define CR_EE (1 << 25) /* Exception (Big) Endian */
+#define ES_TO_AARCH64 1
+#define ES_TO_AARCH32 0
+
+/*
+ * SCR_EL3 bits definitions
+ */
+#define SCR_EL3_RW_AARCH64 (1 << 10) /* Next lower level is AArch64 */
+#define SCR_EL3_RW_AARCH32 (0 << 10) /* Lower lowers level are AArch32 */
+#define SCR_EL3_HCE_EN (1 << 8) /* Hypervisor Call enable */
+#define SCR_EL3_SMD_DIS (1 << 7) /* Secure Monitor Call disable */
+#define SCR_EL3_RES1 (3 << 4) /* Reserved, RES1 */
+#define SCR_EL3_NS_EN (1 << 0) /* EL0 and EL1 in Non-scure state */
+
+/*
+ * SPSR_EL3/SPSR_EL2 bits definitions
+ */
+#define SPSR_EL_END_LE (0 << 9) /* Exception Little-endian */
+#define SPSR_EL_DEBUG_MASK (1 << 9) /* Debug exception masked */
+#define SPSR_EL_ASYN_MASK (1 << 8) /* Asynchronous data abort masked */
+#define SPSR_EL_SERR_MASK (1 << 8) /* System Error exception masked */
+#define SPSR_EL_IRQ_MASK (1 << 7) /* IRQ exception masked */
+#define SPSR_EL_FIQ_MASK (1 << 6) /* FIQ exception masked */
+#define SPSR_EL_T_A32 (0 << 5) /* AArch32 instruction set A32 */
+#define SPSR_EL_M_AARCH64 (0 << 4) /* Exception taken from AArch64 */
+#define SPSR_EL_M_AARCH32 (1 << 4) /* Exception taken from AArch32 */
+#define SPSR_EL_M_SVC (0x3) /* Exception taken from SVC mode */
+#define SPSR_EL_M_HYP (0xa) /* Exception taken from HYP mode */
+#define SPSR_EL_M_EL1H (5) /* Exception taken from EL1h mode */
+#define SPSR_EL_M_EL2H (9) /* Exception taken from EL2h mode */
+
+/*
+ * CPTR_EL2 bits definitions
+ */
+#define CPTR_EL2_RES1 (3 << 12 | 0x3ff) /* Reserved, RES1 */
+
+/*
+ * SCTLR_EL2 bits definitions
+ */
+#define SCTLR_EL2_RES1 (3 << 28 | 3 << 22 | 1 << 18 | 1 << 16 |\
+ 1 << 11 | 3 << 4) /* Reserved, RES1 */
+#define SCTLR_EL2_EE_LE (0 << 25) /* Exception Little-endian */
+#define SCTLR_EL2_WXN_DIS (0 << 19) /* Write permission is not XN */
+#define SCTLR_EL2_ICACHE_DIS (0 << 12) /* Instruction cache disabled */
+#define SCTLR_EL2_SA_DIS (0 << 3) /* Stack Alignment Check disabled */
+#define SCTLR_EL2_DCACHE_DIS (0 << 2) /* Data cache disabled */
+#define SCTLR_EL2_ALIGN_DIS (0 << 1) /* Alignment check disabled */
+#define SCTLR_EL2_MMU_DIS (0) /* MMU disabled */
+
+/*
+ * CNTHCTL_EL2 bits definitions
+ */
+#define CNTHCTL_EL2_EL1PCEN_EN (1 << 1) /* Physical timer regs accessible */
+#define CNTHCTL_EL2_EL1PCTEN_EN (1 << 0) /* Physical counter accessible */
+
+/*
+ * HCR_EL2 bits definitions
+ */
+#define HCR_EL2_RW_AARCH64 (1 << 31) /* EL1 is AArch64 */
+#define HCR_EL2_RW_AARCH32 (0 << 31) /* Lower levels are AArch32 */
+#define HCR_EL2_HCD_DIS (1 << 29) /* Hypervisor Call disabled */
+
+/*
+ * CPACR_EL1 bits definitions
+ */
+#define CPACR_EL1_FPEN_EN (3 << 20) /* SIMD and FP instruction enabled */
+
+/*
+ * SCTLR_EL1 bits definitions
+ */
+#define SCTLR_EL1_RES1 (3 << 28 | 3 << 22 | 1 << 20 |\
+ 1 << 11) /* Reserved, RES1 */
+#define SCTLR_EL1_UCI_DIS (0 << 26) /* Cache instruction disabled */
+#define SCTLR_EL1_EE_LE (0 << 25) /* Exception Little-endian */
+#define SCTLR_EL1_WXN_DIS (0 << 19) /* Write permission is not XN */
+#define SCTLR_EL1_NTWE_DIS (0 << 18) /* WFE instruction disabled */
+#define SCTLR_EL1_NTWI_DIS (0 << 16) /* WFI instruction disabled */
+#define SCTLR_EL1_UCT_DIS (0 << 15) /* CTR_EL0 access disabled */
+#define SCTLR_EL1_DZE_DIS (0 << 14) /* DC ZVA instruction disabled */
+#define SCTLR_EL1_ICACHE_DIS (0 << 12) /* Instruction cache disabled */
+#define SCTLR_EL1_UMA_DIS (0 << 9) /* User Mask Access disabled */
+#define SCTLR_EL1_SED_EN (0 << 8) /* SETEND instruction enabled */
+#define SCTLR_EL1_ITD_EN (0 << 7) /* IT instruction enabled */
+#define SCTLR_EL1_CP15BEN_DIS (0 << 5) /* CP15 barrier operation disabled */
+#define SCTLR_EL1_SA0_DIS (0 << 4) /* Stack Alignment EL0 disabled */
+#define SCTLR_EL1_SA_DIS (0 << 3) /* Stack Alignment EL1 disabled */
+#define SCTLR_EL1_DCACHE_DIS (0 << 2) /* Data cache disabled */
+#define SCTLR_EL1_ALIGN_DIS (0 << 1) /* Alignment check disabled */
+#define SCTLR_EL1_MMU_DIS (0) /* MMU disabled */
+
#ifndef __ASSEMBLY__
u64 get_page_table_size(void);
int __asm_invalidate_l3_icache(void);
void __asm_switch_ttbr(u64 new_ttbr);
-void armv8_switch_to_el2(void);
-void armv8_switch_to_el1(void);
+/*
+ * Switch from EL3 to EL2 for ARMv8
+ *
+ * @args: For loading 64-bit OS, fdt address.
+ * For loading 32-bit OS, zero.
+ * @mach_nr: For loading 64-bit OS, zero.
+ * For loading 32-bit OS, machine nr
+ * @fdt_addr: For loading 64-bit OS, zero.
+ * For loading 32-bit OS, fdt address.
+ * @entry_point: kernel entry point
+ * @es_flag: execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
+ */
+void armv8_switch_to_el2(u64 args, u64 mach_nr, u64 fdt_addr,
+ u64 entry_point, u64 es_flag);
+/*
+ * Switch from EL2 to EL1 for ARMv8
+ *
+ * @args: For loading 64-bit OS, fdt address.
+ * For loading 32-bit OS, zero.
+ * @mach_nr: For loading 64-bit OS, zero.
+ * For loading 32-bit OS, machine nr
+ * @fdt_addr: For loading 64-bit OS, zero.
+ * For loading 32-bit OS, fdt address.
+ * @entry_point: kernel entry point
+ * @es_flag: execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
+ */
+void armv8_switch_to_el1(u64 args, u64 mach_nr, u64 fdt_addr,
+ u64 entry_point, u64 es_flag);
+void armv8_el2_to_aarch32(u64 args, u64 mach_nr, u64 fdt_addr,
+ u64 entry_point);
void gic_init(void);
void gic_send_sgi(unsigned long sgino);
void wait_for_wakeup(void);
{
smp_kick_all_cpus();
dcache_disable(); /* flush cache before swtiching to EL2 */
- armv8_switch_to_el2();
-#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
- armv8_switch_to_el1();
-#endif
}
#endif
}
#endif
+#ifdef CONFIG_ARM64
+__weak void update_os_arch_secondary_cores(uint8_t os_arch)
+{
+}
+
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+static void switch_to_el1(void)
+{
+ if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) &&
+ (images.os.arch == IH_ARCH_ARM))
+ armv8_switch_to_el1(0, (u64)gd->bd->bi_arch_number,
+ (u64)images.ft_addr,
+ (u64)images.ep,
+ ES_TO_AARCH32);
+ else
+ armv8_switch_to_el1((u64)images.ft_addr, 0, 0,
+ images.ep,
+ ES_TO_AARCH64);
+}
+#endif
+#endif
+
/* Subcommand: GO */
static void boot_jump_linux(bootm_headers_t *images, int flag)
{
if (!fake) {
do_nonsec_virt_switch();
- kernel_entry(images->ft_addr, NULL, NULL, NULL);
+
+ update_os_arch_secondary_cores(images->os.arch);
+
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+ armv8_switch_to_el2((u64)images->ft_addr, 0, 0,
+ (u64)switch_to_el1, ES_TO_AARCH64);
+#else
+ if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) &&
+ (images->os.arch == IH_ARCH_ARM))
+ armv8_switch_to_el2(0, (u64)gd->bd->bi_arch_number,
+ (u64)images->ft_addr,
+ (u64)images->ep,
+ ES_TO_AARCH32);
+ else
+ armv8_switch_to_el2((u64)images->ft_addr, 0, 0,
+ images->ep,
+ ES_TO_AARCH64);
+#endif
}
#else
unsigned long machid = gd->bd->bi_arch_number;
config TARGET_ESPRESSO7420
bool "ESPRESSO7420 board"
select ARM64
+ select ARMV8_MULTIENTRY
select SUPPORT_SPL
select OF_CONTROL
select SPL_DISABLE_OF_CONTROL
#include <asm/io.h>
#include <asm/system.h>
+#ifdef CONFIG_TARGET_ESPRESSO7420
+/*
+ * Exynos7420 uses CPU0 of Cluster-1 as boot CPU. Due to this, branch_if_master
+ * fails to identify as the boot CPU as the master CPU. As temporary workaround,
+ * setup the slave CPU boot address as "_main".
+ */
+extern void _main(void);
+void *secondary_boot_addr = (void *)_main;
+#endif /* CONFIG_TARGET_ESPRESSO7420 */
+
void reset_cpu(ulong addr)
{
#ifdef CONFIG_CPU_V7
dcache_enable();
}
#endif
-
-#ifdef CONFIG_ARM64
-void lowlevel_init(void)
-{
- armv8_switch_to_el2();
- armv8_switch_to_el1();
-}
-#endif
/*
* All slaves will enter EL2 and optionally EL1.
*/
+ adr x3, lowlevel_in_el2
+ ldr x4, =ES_TO_AARCH64
bl armv8_switch_to_el2
+
+lowlevel_in_el2:
#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+ adr x3, lowlevel_in_el1
+ ldr x4, =ES_TO_AARCH64
bl armv8_switch_to_el1
-#endif
+lowlevel_in_el1:
+#endif
#endif /* CONFIG_ARMV8_MULTIENTRY */
bl s_init
mfspr r3, PVR
blr
+ .globl get_svr
+get_svr:
+ mfspr r3, SVR
+ blr
+
/*-------------------------------------------------------------------*/
/*
soc_serdes_init();
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes_prtcl_map |= (1 << NONE);
+
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
/*
* Bank two uses the clock from bank three, so if bank two is enabled,
SRDS_RSTCTL_SDPD);
}
#endif
-
- /* Set the first bit to indicate serdes has been initialized */
- serdes_prtcl_map |= (1 << NONE);
}
const char *serdes_clock_to_string(u32 clock)
--- /dev/null
+if TARGET_LS1021AIOT
+
+config SYS_BOARD
+ default "ls1021aiot"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_SOC
+ default "ls102xa"
+
+config SYS_CONFIG_NAME
+ default "ls1021aiot"
+
+endif
--- /dev/null
+LS1021AIOT BOARD
+M: Feng Li <feng.li_2@nxp.com>
+S: Maintained
+F: board/freescale/ls1021aiot/
+F: include/configs/ls1021aiot.h
+F: configs/ls1021aiot_sdcard_defconfig
+F: configs/ls1021aiot_qspi_defconfig
--- /dev/null
+#
+# Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ls1021aiot.o
+obj-$(CONFIG_FSL_DCU_FB) += dcu.o
+obj-$(CONFIG_ARMV7_PSCI) += psci.o
--- /dev/null
+Overview
+--------
+The LS1021A-IOT is a Freescale reference board that hosts
+the LS1021A SoC.
+
+LS1021AIOT board Overview
+-------------------------
+ - DDR Controller
+ - Supports 1GB un-buffered DDR3L SDRAM discrete
+ devices(32-bit bus) with 4 bit ECC
+ - DDR power supplies 1.35V to all devices with
+ automatic tracking of VTT
+ - Soldered DDR chip
+ - Supprot one fixed speed
+ - Ethernet
+ - Two on-board SGMII 10/100/1G ethernet ports
+ - One Gbit Etherent RGMII interface to 4-ports switch
+ with 4x 10/100/1000 RJ145 ports
+ - CPLD
+ - 8-bit registers in CPLD for system configuration
+ - connected to IFC_AD[0:7]
+ - Power Supplies
+ - 12V@5A DC
+ - SDHC
+ - SDHC port connects directly to a full 8-bit SD/MMC slot
+ - Support for SDIO devices
+ - USB
+ - Two on-board USB 3.0
+ - One on-board USB k22
+ - PCIe
+ - Two MiniPCIe Solts
+ - SATA
+ - Support SATA Connector
+ - AUDIO
+ - AUDIO in and out
+ - I/O Expansion
+ - Arduino Shield Connector
+ - Port0 - CAN/GPIO/Flextimer
+ - Port1 - GPIO/CPLD Expansion
+ - Port2 - SPI/I2C/UART
+
+Memory map
+-----------
+The addresses in brackets are physical addresses.
+
+Start Address End Address Description Size
+0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB
+0x00_4000_0000 0x00_43FF_FFFF QSPI(Chip select 0) 64MB
+0x00_4400_0000 0x00_47FF_FFFF QSPI(Chip select 1) 64MB
+0x00_6000_0000 0x00_6000_FFFF CPLD 64K
+0x00_8000_0000 0x00_BFFF_FFFF DDR 1GB
+
+Boot description
+-----------------
+LS1021A-IOT support two ways of boot:
+Qspi boot and SD boot
+The board doesn't support boot from another
+source without changing any switch/jumper.
--- /dev/null
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * FSL DCU Framebuffer driver
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_dcu_fb.h>
+#include "div64.h"
+#include "../common/dcu_sii9022a.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int dcu_set_pixel_clock(unsigned int pixclock)
+{
+ unsigned long long div;
+
+ div = (unsigned long long)(gd->bus_clk / 1000);
+ div *= (unsigned long long)pixclock;
+ do_div(div, 1000000000);
+
+ return div;
+}
+
+int platform_dcu_init(unsigned int xres, unsigned int yres,
+ const char *port,
+ struct fb_videomode *dcu_fb_videomode)
+{
+ const char *name;
+ unsigned int pixel_format;
+
+ if (strncmp(port, "twr_lcd", 4) == 0) {
+ name = "TWR_LCD_RGB card";
+ } else {
+ name = "HDMI";
+ dcu_set_dvi_encoder(dcu_fb_videomode);
+ }
+
+ printf("DCU: Switching to %s monitor @ %ux%u\n", name, xres, yres);
+
+ pixel_format = 32;
+ fsl_dcu_init(xres, yres, pixel_format);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/ls102xa_stream_id.h>
+
+#include <asm/arch/ls102xa_devdis.h>
+#include <asm/arch/ls102xa_soc.h>
+#include <asm/arch/ls102xa_sata.h>
+#include <fsl_csu.h>
+#include <fsl_esdhc.h>
+#include <fsl_immap.h>
+#include <netdev.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+#include <spl.h>
+
+#include <fsl_validate.h>
+#include "../common/sleep.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DDR_SIZE 0x40000000
+
+
+int checkboard(void)
+{
+ puts("Board: LS1021AIOT\n");
+
+#ifndef CONFIG_QSPI_BOOT
+ struct ccsr_gur *dcfg = (struct ccsr_gur *)CONFIG_SYS_FSL_GUTS_ADDR;
+ u32 cpldrev;
+
+ cpldrev = in_be32(&dcfg->gpporcr1);
+
+ printf("CPLD: V%d.%d\n", ((cpldrev >> 28) & 0xf), ((cpldrev >> 24) &
+ 0xf));
+#endif
+ return 0;
+}
+
+void ddrmc_init(void)
+{
+ struct ccsr_ddr *ddr = (struct ccsr_ddr *)CONFIG_SYS_FSL_DDR_ADDR;
+ u32 temp_sdram_cfg, tmp;
+
+ out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG);
+
+ out_be32(&ddr->cs0_bnds, DDR_CS0_BNDS);
+ out_be32(&ddr->cs0_config, DDR_CS0_CONFIG);
+
+ out_be32(&ddr->timing_cfg_0, DDR_TIMING_CFG_0);
+ out_be32(&ddr->timing_cfg_1, DDR_TIMING_CFG_1);
+ out_be32(&ddr->timing_cfg_2, DDR_TIMING_CFG_2);
+ out_be32(&ddr->timing_cfg_3, DDR_TIMING_CFG_3);
+ out_be32(&ddr->timing_cfg_4, DDR_TIMING_CFG_4);
+ out_be32(&ddr->timing_cfg_5, DDR_TIMING_CFG_5);
+
+ out_be32(&ddr->sdram_cfg_2, DDR_SDRAM_CFG_2);
+ out_be32(&ddr->ddr_cdr2, DDR_DDR_CDR2);
+
+ out_be32(&ddr->sdram_mode, DDR_SDRAM_MODE);
+ out_be32(&ddr->sdram_mode_2, DDR_SDRAM_MODE_2);
+
+ out_be32(&ddr->sdram_interval, DDR_SDRAM_INTERVAL);
+
+ out_be32(&ddr->ddr_wrlvl_cntl, DDR_DDR_WRLVL_CNTL);
+
+ out_be32(&ddr->ddr_wrlvl_cntl_2, DDR_DDR_WRLVL_CNTL_2);
+ out_be32(&ddr->ddr_wrlvl_cntl_3, DDR_DDR_WRLVL_CNTL_3);
+
+ out_be32(&ddr->ddr_cdr1, DDR_DDR_CDR1);
+
+ out_be32(&ddr->sdram_clk_cntl, DDR_SDRAM_CLK_CNTL);
+ out_be32(&ddr->ddr_zq_cntl, DDR_DDR_ZQ_CNTL);
+
+ out_be32(&ddr->cs0_config_2, DDR_CS0_CONFIG_2);
+
+ /* DDR erratum A-009942 */
+ tmp = in_be32(&ddr->debug[28]);
+ out_be32(&ddr->debug[28], tmp | 0x0070006f);
+
+ udelay(500);
+
+ temp_sdram_cfg = (DDR_SDRAM_CFG_MEM_EN & ~SDRAM_CFG_BI);
+
+ out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG | temp_sdram_cfg);
+}
+
+int dram_init(void)
+{
+#if (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
+ ddrmc_init();
+#endif
+
+ gd->ram_size = DDR_SIZE;
+ return 0;
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg[1] = {
+ {CONFIG_SYS_FSL_ESDHC_ADDR},
+};
+
+int board_mmc_init(bd_t *bis)
+{
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
+}
+
+#endif
+
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+ struct fsl_pq_mdio_info mdio_info;
+ struct tsec_info_struct tsec_info[4];
+ int num = 0;
+
+#ifdef CONFIG_TSEC1
+ SET_STD_TSEC_INFO(tsec_info[num], 1);
+ if (is_serdes_configured(SGMII_TSEC1)) {
+ puts("eTSEC1 is in sgmii mode.\n");
+ tsec_info[num].flags |= TSEC_SGMII;
+ }
+ num++;
+#endif
+#ifdef CONFIG_TSEC2
+ SET_STD_TSEC_INFO(tsec_info[num], 2);
+ if (is_serdes_configured(SGMII_TSEC2)) {
+ puts("eTSEC2 is in sgmii mode.\n");
+ tsec_info[num].flags |= TSEC_SGMII;
+ }
+ num++;
+#endif
+ if (!num) {
+ printf("No TSECs initialized\n");
+ return 0;
+ }
+
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
+ tsec_eth_init(bis, tsec_info, num);
+
+ return pci_eth_init(bis);
+}
+#endif
+
+int board_early_init_f(void)
+{
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+#ifdef CONFIG_TSEC_ENET
+ /* clear BD & FR bits for BE BD's and frame data */
+ clrbits_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
+ out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
+
+#endif
+
+ arch_soc_init();
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+ /* Clear the BSS */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ get_clocks();
+
+ preloader_console_init();
+
+ dram_init();
+
+ /* Allow OCRAM access permission as R/W */
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+ enable_layerscape_ns_access();
+#endif
+
+ board_init_r(NULL, 0);
+}
+#endif
+
+int board_init(void)
+{
+#ifndef CONFIG_SYS_FSL_NO_SERDES
+ fsl_serdes_init();
+#endif
+
+ ls102xa_smmu_stream_id_init();
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+ enable_layerscape_ns_access();
+#endif
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+#ifdef CONFIG_SCSI_AHCI_PLAT
+ ls1021a_sata_init();
+#endif
+
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_MISC_INIT_R)
+int misc_init_r(void)
+{
+#ifdef CONFIG_FSL_DEVICE_DISABLE
+ device_disable(devdis_tbl, ARRAY_SIZE(devdis_tbl));
+
+#endif
+
+#ifdef CONFIG_FSL_CAAM
+ return sec_init();
+#endif
+}
+#endif
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+
+ return 0;
+}
+
+void flash_write16(u16 val, void *addr)
+{
+ u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
+
+ __raw_writew(shftval, addr);
+}
+
+u16 flash_read16(void *addr)
+{
+ u16 val = __raw_readw(addr);
+
+ return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
+}
--- /dev/null
+#PBI commands
+
+09570200 ffffffff
+09570158 00000300
+8940007c 21f47300
+
+#Configure Scratch register
+09ee0200 10000000
+#Configure alternate space
+09570158 00001000
+#Flush PBL data
+096100c0 000FFFFF
+
+09ea085c 00502880
--- /dev/null
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# serdes protocol
+
+#Default with 2 x SGMII (no SATA)
+0608000a 00000000 00000000 00000000
+20000000 08407900 60025a00 21046000
+00000000 00000000 00000000 20038000
+20024800 881b1340 00000000 00000000
+
+#SATA set-up
+#0608000a 00000000 00000000 00000000
+#70000000 08007900 60025a00 21046000
+#00000000 00000000 00000000 20038000
+#20024800 881b1340 00000000 00000000
+
+#HDMI set-up
+#0608000a 00000000 00000000 00000000
+#20000000 08407900 60025a00 21046000
+#00000000 00000000 00000000 20038000
+#00000000 881b1340 00000000 00000000
+
+#QE testing
+#0608000a 00000000 00000000 00000000
+#20000000 08407900 60025a00 21046000
+#00000000 00000000 00000000 00038000
+#20094800 881b1340 00000000 00000000
--- /dev/null
+/*
+ * Copyright 2016 NXP Semiconductor.
+ * Author: Feng Li <feng.li_2@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+#include <asm/armv7.h>
+#include <asm/psci.h>
+
+ .pushsection ._secure.text, "ax"
+
+ .arch_extension sec
+
+ .align 5
+
+.globl psci_system_off
+psci_system_off:
+1: wfi
+ b 1b
+
+.globl psci_text_end
+psci_text_end:
+ nop
+ .popsection
#PBL preamble and RCW header
aa55aa55 01ee0100
# serdes protocol
-0608000a 00000000 00000000 00000000
+0608000c 00000000 00000000 00000000
60000000 00407900 e0106a00 21046000
00000000 00000000 00000000 00038000
00000000 001b7200 00000000 00000000
aa55aa55 01ee0100
#enable IFC, disable QSPI and DSPI
-0608000a 00000000 00000000 00000000
+0608000c 00000000 00000000 00000000
60000000 00407900 60040a00 21046000
00000000 00000000 00000000 00038000
00000000 001b7200 00000000 00000000
#disable IFC, enable QSPI and DSPI
-#0608000a 00000000 00000000 00000000
+#0608000c 00000000 00000000 00000000
#60000000 00407900 60040a00 21046000
#00000000 00000000 00000000 00038000
#20024800 001b7200 00000000 00000000
aa55aa55 01ee0100
#enable IFC, disable QSPI and DSPI
-#0608000a 00000000 00000000 00000000
+#0608000c 00000000 00000000 00000000
#60000000 00407900 60040a00 21046000
#00000000 00000000 00000000 00038000
#00000000 001b7200 00000000 00000000
#disable IFC, enable QSPI and DSPI
-0608000a 00000000 00000000 00000000
+0608000c 00000000 00000000 00000000
60000000 00407900 60040a00 21046000
00000000 00000000 00000000 00038000
20024800 001b7200 00000000 00000000
aa55aa55 01ee0100
#enable IFC, disable QSPI and DSPI
-0608000a 00000000 00000000 00000000
+0608000c 00000000 00000000 00000000
30000000 00007900 60040a00 21046000
00000000 00000000 00000000 20000000
00080000 881b7340 00000000 00000000
aa55aa55 01ee0100
#disable IFC, enable QSPI and DSPI
-0608000a 00000000 00000000 00000000
+0608000c 00000000 00000000 00000000
30000000 00007900 60040a00 21046000
00000000 00000000 00000000 20000000
20024800 881b7340 00000000 00000000
return 66666666;
}
+#ifdef CONFIG_LPUART
+u32 get_lpuart_clk(void)
+{
+ return gd->bus_clk;
+}
+#endif
+
int select_i2c_ch_pca9547(u8 ch)
{
int ret;
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
u32 usb_pwrfault;
#endif
+#ifdef CONFIG_LPUART
+ u8 uart;
+#endif
#ifdef CONFIG_SYS_I2C_EARLY_INIT
i2c_early_init_f();
out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
#endif
+#ifdef CONFIG_LPUART
+ /* We use lpuart0 as system console */
+ uart = QIXIS_READ(brdcfg[14]);
+ uart &= ~CFG_UART_MUX_MASK;
+ uart |= CFG_LPUART_EN << CFG_UART_MUX_SHIFT;
+ QIXIS_WRITE(brdcfg[14], uart);
+#endif
+
return 0;
}
LS2080A BOARD
-M: York Sun <york.sun@nxp.com>
+M: York Sun <york.sun@nxp.com>, Priyanka Jain <priyanka.jain@nxp.com>
S: Maintained
F: board/freescale/ls2080a/
F: include/configs/ls2080a_emu.h
LS2080A BOARD
-M: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+M: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>, Priyanka Jain <priyanka.jain@nxp.com>
S: Maintained
F: board/freescale/ls2080aqds/
F: board/freescale/ls2080a/ls2080aqds.c
--------
The LS2080A Development System (QDS) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS2080A
-Layerscape Architecture processor. The LS2080AQDS provides validation and
-SW development platform for the Freescale LS2080A processor series, with
-a complete debugging environment.
+and LS2088A Layerscape Architecture processor. The LS2080AQDS provides
+validation and SW development platform for the Freescale LS2080A, LS2088A
+processor series, with a complete debugging environment.
-LS2080A SoC Overview
+LS2080A, LS2088A SoC Overview
--------------------
-Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A
-SoC overview.
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A,
+LS2088A SoC overview.
LS2080AQDS board Overview
-----------------------
};
/* Slot2 does not have EMI connections */
-#define EMI_NONE 0xFFFFFFFF
+#define EMI_NONE 0xFF
#define EMI1_SLOT1 0
#define EMI1_SLOT2 1
#define EMI1_SLOT3 2
mdelay(10);
- if ((value & 0xfff) == 0x40f) {
+ if ((value & 0xfff) == 0x401) {
printf("DPMAC %d:PHY is ..... Configured\n", dpmac_id);
+ miiphy_write(dev[mii_bus], riser_phy_addr[dpmac],
+ 0x1f, 0);
continue;
}
if (ret > 0)
goto error;
- mdelay(1);
+ mdelay(100);
ret = miiphy_read(dev[mii_bus],
riser_phy_addr[dpmac],
0x11, &value);
if (ret > 0)
goto error;
- mdelay(10);
- if ((value & 0xfff) == 0x40f) {
+ if ((value & 0xfff) == 0x401) {
printf("DPMAC %d :PHY is configured ",
dpmac_id);
printf("after setting repeater 0x%x\n",
value);
i = 5;
j = 5;
- } else
+ } else {
printf("DPMAC %d :PHY is failed to ",
dpmac_id);
printf("configure the repeater 0x%x\n",
value);
}
+ }
}
+ miiphy_write(dev[mii_bus], riser_phy_addr[dpmac], 0x1f, 0);
}
error:
if (ret)
}
break;
+ case 0x39:
+ printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+ serdes1_prtcl);
+ if (hwconfig_f("xqsgmii", env_hwconfig)) {
+ lane_to_slot_fsm1[0] = EMI1_SLOT3;
+ lane_to_slot_fsm1[1] = EMI1_SLOT3;
+ lane_to_slot_fsm1[2] = EMI1_SLOT3;
+ lane_to_slot_fsm1[3] = EMI_NONE;
+ } else {
+ lane_to_slot_fsm1[0] = EMI_NONE;
+ lane_to_slot_fsm1[1] = EMI_NONE;
+ lane_to_slot_fsm1[2] = EMI_NONE;
+ lane_to_slot_fsm1[3] = EMI_NONE;
+ }
+ lane_to_slot_fsm1[4] = EMI1_SLOT3;
+ lane_to_slot_fsm1[5] = EMI1_SLOT3;
+ lane_to_slot_fsm1[6] = EMI1_SLOT3;
+ lane_to_slot_fsm1[7] = EMI_NONE;
+ break;
+
+ case 0x4D:
+ printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+ serdes1_prtcl);
+ if (hwconfig_f("xqsgmii", env_hwconfig)) {
+ lane_to_slot_fsm1[0] = EMI1_SLOT3;
+ lane_to_slot_fsm1[1] = EMI1_SLOT3;
+ lane_to_slot_fsm1[2] = EMI_NONE;
+ lane_to_slot_fsm1[3] = EMI_NONE;
+ } else {
+ lane_to_slot_fsm1[0] = EMI_NONE;
+ lane_to_slot_fsm1[1] = EMI_NONE;
+ lane_to_slot_fsm1[2] = EMI_NONE;
+ lane_to_slot_fsm1[3] = EMI_NONE;
+ }
+ lane_to_slot_fsm1[4] = EMI1_SLOT3;
+ lane_to_slot_fsm1[5] = EMI1_SLOT3;
+ lane_to_slot_fsm1[6] = EMI_NONE;
+ lane_to_slot_fsm1[7] = EMI_NONE;
+ break;
+
case 0x2A:
+ case 0x4B:
+ case 0x4C:
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
serdes1_prtcl);
break;
lane_to_slot_fsm2[7] = EMI1_SLOT6;
}
break;
+
+ case 0x47:
+ printf("qds: WRIOP: Supported SerDes2 Protocol 0x%02x\n",
+ serdes2_prtcl);
+ lane_to_slot_fsm2[0] = EMI_NONE;
+ lane_to_slot_fsm2[1] = EMI1_SLOT5;
+ lane_to_slot_fsm2[2] = EMI1_SLOT5;
+ lane_to_slot_fsm2[3] = EMI1_SLOT5;
+
+ if (hwconfig_f("xqsgmii", env_hwconfig)) {
+ lane_to_slot_fsm2[4] = EMI_NONE;
+ lane_to_slot_fsm2[5] = EMI1_SLOT5;
+ lane_to_slot_fsm2[6] = EMI1_SLOT5;
+ lane_to_slot_fsm2[7] = EMI1_SLOT5;
+ }
+ break;
+
+ case 0x57:
+ printf("qds: WRIOP: Supported SerDes2 Protocol 0x%02x\n",
+ serdes2_prtcl);
+ if (hwconfig_f("xqsgmii", env_hwconfig)) {
+ lane_to_slot_fsm2[0] = EMI_NONE;
+ lane_to_slot_fsm2[1] = EMI_NONE;
+ lane_to_slot_fsm2[2] = EMI_NONE;
+ lane_to_slot_fsm2[3] = EMI_NONE;
+ }
+ lane_to_slot_fsm2[4] = EMI_NONE;
+ lane_to_slot_fsm2[5] = EMI_NONE;
+ lane_to_slot_fsm2[6] = EMI1_SLOT5;
+ lane_to_slot_fsm2[7] = EMI1_SLOT5;
+ break;
+
default:
printf(" %s qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n",
__func__ , serdes2_prtcl);
switch (serdes1_prtcl) {
case 0x07:
+ case 0x39:
+ case 0x4D:
+ lane = serdes_get_first_lane(FSL_SRDS_1, SGMII1 + dpmac_id - 1);
- lane = serdes_get_first_lane(FSL_SRDS_1, SGMII1 + dpmac_id);
slot = lane_to_slot_fsm1[lane];
switch (++slot) {
wriop_set_mdio(dpmac_id, bus);
break;
case 3:
+ if (slot == EMI_NONE)
+ return;
+ if (serdes1_prtcl == 0x39) {
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 2]);
+ if (dpmac_id >= 6 && hwconfig_f("xqsgmii",
+ env_hwconfig))
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 3]);
+ } else {
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 2]);
+ if (dpmac_id >= 7 && hwconfig_f("xqsgmii",
+ env_hwconfig))
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 3]);
+ }
+ dpmac_info[dpmac_id].board_mux = EMI1_SLOT3;
+ bus = mii_dev_for_muxval(EMI1_SLOT3);
+ wriop_set_mdio(dpmac_id, bus);
break;
case 4:
break;
case 0x07:
case 0x08:
case 0x49:
+ case 0x47:
+ case 0x57:
lane = serdes_get_first_lane(FSL_SRDS_2, SGMII9 +
(dpmac_id - 9));
slot = lane_to_slot_fsm2[lane];
wriop_set_mdio(dpmac_id, bus);
break;
case 5:
- break;
+ if (slot == EMI_NONE)
+ return;
+ if (serdes2_prtcl == 0x47) {
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 10]);
+ if (dpmac_id >= 14 && hwconfig_f("xqsgmii",
+ env_hwconfig))
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 11]);
+ } else {
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 11]);
+ }
+ dpmac_info[dpmac_id].board_mux = EMI1_SLOT5;
+ bus = mii_dev_for_muxval(EMI1_SLOT5);
+ wriop_set_mdio(dpmac_id, bus);
+ break;
case 6:
/* Slot housing a SGMII riser card? */
wriop_set_phy_address(dpmac_id,
switch (serdes1_prtcl) {
case 0x2A:
+ case 0x4B:
+ case 0x4C:
/*
* XFI does not need a PHY to work, but to avoid U-Boot use
* default PHY address which is zero to a MAC when it found
LS2080A BOARD
-M: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+M: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>, Priyanka Jain <priyanka.jain@nxp.com>
S: Maintained
F: board/freescale/ls2080ardb/
F: board/freescale/ls2080a/ls2080ardb.c
Overview
--------
The LS2080A Reference Design (RDB) is a high-performance computing,
-evaluation, and development platform that supports the QorIQ LS2080A
+evaluation, and development platform that supports the QorIQ LS2080A, LS2088A
Layerscape Architecture processor.
-LS2080A SoC Overview
+LS2080A, LS2088A SoC Overview
--------------------
-Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A
-SoC overview.
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A,
+LS2088A SoC overview.
LS2080ARDB board Overview
-----------------------
#include <common.h>
#include <asm/arch/hardware.h>
-#include <asm/arch/regs-mmc.h>
#include <asm/arch/pxa.h>
-#include <netdev.h>
+#include <asm/arch/regs-mmc.h>
+#include <asm/arch/regs-uart.h>
#include <asm/io.h>
+#include <dm/platdata.h>
+#include <dm/platform_data/serial_pxa.h>
+#include <netdev.h>
#include <serial.h>
#include <usb.h>
return 0;
}
#endif
+
+static const struct pxa_serial_platdata serial_platdata = {
+ .base = (struct pxa_uart_regs *)FFUART_BASE,
+ .port = FFUART_INDEX,
+ .baudrate = CONFIG_BAUDRATE,
+};
+
+U_BOOT_DEVICE(pxa_serials) = {
+ .name = "serial_pxa",
+ .platdata = &serial_platdata,
+};
return new_fdt;
}
+#ifdef CONFIG_ARM64
+static unsigned long efi_run_in_el2(ulong (*entry)(void *image_handle,
+ struct efi_system_table *st), void *image_handle,
+ struct efi_system_table *st)
+{
+ /* Enable caches again */
+ dcache_enable();
+
+ return entry(image_handle, st);
+}
+#endif
+
/*
* Load an EFI payload into a newly allocated piece of memory, register all
* EFI objects it would want to access and jump to it.
if (current_el() == 3) {
smp_kick_all_cpus();
dcache_disable(); /* flush cache before switch to EL2 */
- armv8_switch_to_el2();
- /* Enable caches again */
- dcache_enable();
+
+ /* Move into EL2 and keep running there */
+ armv8_switch_to_el2((ulong)entry, (ulong)&loaded_image_info,
+ (ulong)&systab, (ulong)efi_run_in_el2,
+ ES_TO_AARCH64);
+
+ /* Should never reach here, efi exits with longjmp */
+ while (1) { }
}
#endif
#include <time.h>
#else
#include <linux/compiler.h>
+#include <linux/kconfig.h>
#include <common.h>
#include <errno.h>
#include <mapmem.h>
int fit_image_check_arch(const void *fit, int noffset, uint8_t arch)
{
uint8_t image_arch;
+ int aarch32_support = 0;
+
+#ifdef CONFIG_ARM64_SUPPORT_AARCH32
+ aarch32_support = 1;
+#endif
if (fit_image_get_arch(fit, noffset, &image_arch))
return 0;
return (arch == image_arch) ||
- (arch == IH_ARCH_I386 && image_arch == IH_ARCH_X86_64);
+ (arch == IH_ARCH_I386 && image_arch == IH_ARCH_X86_64) ||
+ (arch == IH_ARCH_ARM64 && image_arch == IH_ARCH_ARM &&
+ aarch32_support);
}
/**
int type_ok, os_ok;
ulong load, data, len;
uint8_t os;
+#ifndef USE_HOSTCC
+ uint8_t os_arch;
+#endif
const char *prop_name;
int ret;
return -ENOEXEC;
}
#endif
+
+#ifndef USE_HOSTCC
+ fit_image_get_arch(fit, noffset, &os_arch);
+ images->os.arch = os_arch;
+#endif
+
if (image_type == IH_TYPE_FLATDT &&
!fit_image_check_comp(fit, noffset, IH_COMP_NONE)) {
puts("FDT image is compressed");
CONFIG_ARM=y
CONFIG_TARGET_COLIBRI_PXA270=y
# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="$ "
+# CONFIG_CMD_ELF is not set
# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_DM=y
+CONFIG_DM_SERIAL=y
+CONFIG_PXA_SERIAL=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
+# CONFIG_REGEX is not set
CONFIG_OF_LIBFDT=y
# CONFIG_EFI_LOADER is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
+CONFIG_PXA_SERIAL=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+CONFIG_ARM=y
+CONFIG_DM_SPI=y
+CONFIG_DM=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_TARGET_LS1021AIOT=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-iot-duart"
--- /dev/null
+CONFIG_ARM=y
+CONFIG_TARGET_LS1021AIOT=y
+CONFIG_SPL=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-iot-duart"
+CONFIG_DM_SPI=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI"
+CONFIG_CMD_DM=y
+CONFIG_DM=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_FSL_DSPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046AQDS=y
+CONFIG_SYS_FSL_DDR4=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-lpuart"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="LPUART"
+CONFIG_BOOTDELAY=10
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_DM_SPI=y
+CONFIG_SPI_FLASH=y
+CONFIG_FSL_DSPI=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_PXA_SERIAL=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_LCD=y
goto err_dpmac_setup;
#ifdef CONFIG_PHYLIB
- if (priv->phydev)
+ if (priv->phydev) {
err = phy_startup(priv->phydev);
if (err) {
printf("%s: Could not initialize\n",
priv->phydev->dev->name);
goto err_dpamc_bind;
}
+ }
#else
priv->phydev = (struct phy_device *)malloc(sizeof(struct phy_device));
memset(priv->phydev, 0, sizeof(struct phy_device));
for example APQ8016 and MSM8916.
Single baudrate is supported in current implementation (115200).
+config PXA_SERIAL
+ bool "PXA serial port support"
+ help
+ If you have a machine based on a Marvell XScale PXA2xx CPU you
+ can enable its onboard serial ports by enabling this option.
+
endmenu
}
#else
+u32 __weak get_lpuart_clk(void)
+{
+ return CONFIG_SYS_CLK_FREQ;
+}
+
static void _lpuart32_serial_setbrg(struct lpuart_fsl *base, int baudrate)
{
- u32 clk = CONFIG_SYS_CLK_FREQ;
+ u32 clk = get_lpuart_clk();
u32 sbr;
sbr = (clk / (16 * baudrate));
*
* Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
*
+ * Modified to add driver model (DM) support
+ * (C) Copyright 2016 Marcel Ziswiler <marcel.ziswiler@toradex.com>
+ *
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/arch/pxa-regs.h>
#include <asm/arch/regs-uart.h>
#include <asm/io.h>
+#include <dm.h>
+#include <dm/platform_data/serial_pxa.h>
#include <linux/compiler.h>
#include <serial.h>
#include <watchdog.h>
DECLARE_GLOBAL_DATA_PTR;
-/*
- * The numbering scheme differs here for PXA25x, PXA27x and PXA3xx so we can
- * easily handle enabling of clock.
- */
-#ifdef CONFIG_CPU_MONAHANS
-#define UART_CLK_BASE CKENA_21_BTUART
-#define UART_CLK_REG CKENA
-#define BTUART_INDEX 0
-#define FFUART_INDEX 1
-#define STUART_INDEX 2
-#elif CONFIG_CPU_PXA25X
-#define UART_CLK_BASE (1 << 4) /* HWUART */
-#define UART_CLK_REG CKEN
-#define HWUART_INDEX 0
-#define STUART_INDEX 1
-#define FFUART_INDEX 2
-#define BTUART_INDEX 3
-#else /* PXA27x */
-#define UART_CLK_BASE CKEN5_STUART
-#define UART_CLK_REG CKEN
-#define STUART_INDEX 0
-#define FFUART_INDEX 1
-#define BTUART_INDEX 2
-#endif
-
-/*
- * Only PXA250 has HWUART, to avoid poluting the code with more macros,
- * artificially introduce this.
- */
-#ifndef CONFIG_CPU_PXA25X
-#define HWUART_INDEX 0xff
-#endif
-
-static uint32_t pxa_uart_get_baud_divider(void)
-{
- if (gd->baudrate == 1200)
- return 768;
- else if (gd->baudrate == 9600)
- return 96;
- else if (gd->baudrate == 19200)
- return 48;
- else if (gd->baudrate == 38400)
- return 24;
- else if (gd->baudrate == 57600)
- return 16;
- else if (gd->baudrate == 115200)
- return 8;
- else /* Unsupported baudrate */
- return 0;
-}
-
-static struct pxa_uart_regs *pxa_uart_index_to_regs(uint32_t uart_index)
+static uint32_t pxa_uart_get_baud_divider(int baudrate)
{
- switch (uart_index) {
- case FFUART_INDEX: return (struct pxa_uart_regs *)FFUART_BASE;
- case BTUART_INDEX: return (struct pxa_uart_regs *)BTUART_BASE;
- case STUART_INDEX: return (struct pxa_uart_regs *)STUART_BASE;
- case HWUART_INDEX: return (struct pxa_uart_regs *)HWUART_BASE;
- default:
- return NULL;
- }
+ return 921600 / baudrate;
}
static void pxa_uart_toggle_clock(uint32_t uart_index, int enable)
/*
* Enable clock and set baud rate, parity etc.
*/
-void pxa_setbrg_dev(uint32_t uart_index)
+void pxa_setbrg_common(struct pxa_uart_regs *uart_regs, int port, int baudrate)
{
- uint32_t divider = 0;
- struct pxa_uart_regs *uart_regs;
-
- divider = pxa_uart_get_baud_divider();
+ uint32_t divider = pxa_uart_get_baud_divider(baudrate);
if (!divider)
hang();
- uart_regs = pxa_uart_index_to_regs(uart_index);
- if (!uart_regs)
- hang();
- pxa_uart_toggle_clock(uart_index, 1);
+ pxa_uart_toggle_clock(port, 1);
/* Disable interrupts and FIFOs */
writel(0, &uart_regs->ier);
writel(IER_UUE, &uart_regs->ier);
}
+#ifndef CONFIG_DM_SERIAL
+static struct pxa_uart_regs *pxa_uart_index_to_regs(uint32_t uart_index)
+{
+ switch (uart_index) {
+ case FFUART_INDEX: return (struct pxa_uart_regs *)FFUART_BASE;
+ case BTUART_INDEX: return (struct pxa_uart_regs *)BTUART_BASE;
+ case STUART_INDEX: return (struct pxa_uart_regs *)STUART_BASE;
+ case HWUART_INDEX: return (struct pxa_uart_regs *)HWUART_BASE;
+ default:
+ return NULL;
+ }
+}
+
+/*
+ * Enable clock and set baud rate, parity etc.
+ */
+void pxa_setbrg_dev(uint32_t uart_index)
+{
+ struct pxa_uart_regs *uart_regs = pxa_uart_index_to_regs(uart_index);
+ if (!uart_regs)
+ panic("Failed getting UART registers\n");
+
+ pxa_setbrg_common(uart_regs, uart_index, gd->baudrate);
+}
+
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*/
int pxa_init_dev(unsigned int uart_index)
{
- pxa_setbrg_dev (uart_index);
+ pxa_setbrg_dev(uart_index);
return 0;
}
serial_register(&serial_stuart_device);
#endif
}
+#endif /* CONFIG_DM_SERIAL */
+
+#ifdef CONFIG_DM_SERIAL
+static int pxa_serial_probe(struct udevice *dev)
+{
+ struct pxa_serial_platdata *plat = dev->platdata;
+
+ pxa_setbrg_common((struct pxa_uart_regs *)plat->base, plat->port,
+ plat->baudrate);
+ return 0;
+}
+
+static int pxa_serial_putc(struct udevice *dev, const char ch)
+{
+ struct pxa_serial_platdata *plat = dev->platdata;
+ struct pxa_uart_regs *uart_regs = (struct pxa_uart_regs *)plat->base;
+
+ /* Wait for last character to go. */
+ if (!(readl(&uart_regs->lsr) & LSR_TEMT))
+ return -EAGAIN;
+
+ writel(ch, &uart_regs->thr);
+
+ return 0;
+}
+
+static int pxa_serial_getc(struct udevice *dev)
+{
+ struct pxa_serial_platdata *plat = dev->platdata;
+ struct pxa_uart_regs *uart_regs = (struct pxa_uart_regs *)plat->base;
+
+ /* Wait for a character to arrive. */
+ if (!(readl(&uart_regs->lsr) & LSR_DR))
+ return -EAGAIN;
+
+ return readl(&uart_regs->rbr) & 0xff;
+}
+
+int pxa_serial_setbrg(struct udevice *dev, int baudrate)
+{
+ struct pxa_serial_platdata *plat = dev->platdata;
+ struct pxa_uart_regs *uart_regs = (struct pxa_uart_regs *)plat->base;
+ int port = plat->port;
+
+ pxa_setbrg_common(uart_regs, port, baudrate);
+
+ return 0;
+}
+
+static int pxa_serial_pending(struct udevice *dev, bool input)
+{
+ struct pxa_serial_platdata *plat = dev->platdata;
+ struct pxa_uart_regs *uart_regs = (struct pxa_uart_regs *)plat->base;
+
+ if (input)
+ return readl(&uart_regs->lsr) & LSR_DR ? 1 : 0;
+ else
+ return readl(&uart_regs->lsr) & LSR_TEMT ? 0 : 1;
+
+ return 0;
+}
+
+static const struct dm_serial_ops pxa_serial_ops = {
+ .putc = pxa_serial_putc,
+ .pending = pxa_serial_pending,
+ .getc = pxa_serial_getc,
+ .setbrg = pxa_serial_setbrg,
+};
+
+U_BOOT_DRIVER(serial_pxa) = {
+ .name = "serial_pxa",
+ .id = UCLASS_SERIAL,
+ .probe = pxa_serial_probe,
+ .ops = &pxa_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+#endif /* CONFIG_DM_SERIAL */
/*
* Serial Console Configuration
*/
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART 1
-#define CONFIG_CONS_INDEX 3
#define CONFIG_BAUDRATE 115200
/*
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_DEVICE_NULLDEV 1
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_AUTO_COMPLETE 1
+#undef CONFIG_CMDLINE_EDITING /* Saves 2.5 KB */
+#undef CONFIG_AUTO_COMPLETE /* Saves 2.5 KB */
/*
* Clock Configuration
#define CONFIG_IRAM_BASE 0x02100000
#define CONFIG_IRAM_SIZE 0x58000
#define CONFIG_IRAM_END (CONFIG_IRAM_BASE + CONFIG_IRAM_SIZE)
+#define CPU_RELEASE_ADDR secondary_boot_addr
/* Number of CPUs available */
#define CONFIG_CORE_COUNT 0x8
/*
* Serial port
*/
-
-#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART
#define CONFIG_CONS_INDEX 3
"kernel_size=0x2800000\0" \
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
- "earlycon=uart8250,mmio,0x21c0500"
+ "earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\
"$kernel_start $kernel_size && "\
"bootm $kernel_load"
--- /dev/null
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_LS102XA
+
+#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
+
+#define CONFIG_SYS_FSL_CLK
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
+
+#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
+
+/* XHCI Support - enabled by default */
+#define CONFIG_HAS_FSL_XHCI_USB
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+#endif
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
+#endif
+
+/*
+ * Generic Timer Definitions
+ */
+#define GENERIC_TIMER_CLK 12500000
+
+#define CONFIG_SYS_CLK_FREQ 100000000
+#define CONFIG_DDR_CLK_FREQ 100000000
+
+/*
+ * DDR: 800 MHz ( 1600 MT/s data rate )
+ */
+
+#define DDR_SDRAM_CFG 0x470c0008
+#define DDR_CS0_BNDS 0x008000bf
+#define DDR_CS0_CONFIG 0x80014302
+#define DDR_TIMING_CFG_0 0x50550004
+#define DDR_TIMING_CFG_1 0xbcb38c56
+#define DDR_TIMING_CFG_2 0x0040d120
+#define DDR_TIMING_CFG_3 0x010e1000
+#define DDR_TIMING_CFG_4 0x00000001
+#define DDR_TIMING_CFG_5 0x03401400
+#define DDR_SDRAM_CFG_2 0x00401010
+#define DDR_SDRAM_MODE 0x00061c60
+#define DDR_SDRAM_MODE_2 0x00180000
+#define DDR_SDRAM_INTERVAL 0x18600618
+#define DDR_DDR_WRLVL_CNTL 0x8655f605
+#define DDR_DDR_WRLVL_CNTL_2 0x05060607
+#define DDR_DDR_WRLVL_CNTL_3 0x05050505
+#define DDR_DDR_CDR1 0x80040000
+#define DDR_DDR_CDR2 0x00000001
+#define DDR_SDRAM_CLK_CNTL 0x02000000
+#define DDR_DDR_ZQ_CNTL 0x89080600
+#define DDR_CS0_CONFIG_2 0
+#define DDR_SDRAM_CFG_MEM_EN 0x80000000
+#define SDRAM_CFG2_D_INIT 0x00000010
+#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
+#define SDRAM_CFG2_FRC_SR 0x80000000
+#define SDRAM_CFG_BI 0x00000001
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_SYS_FSL_PBL_PBI \
+ board/freescale/ls1021aiot/ls102xa_pbi.cfg
+#endif
+
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_FSL_PBL_RCW \
+ board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
+
+#define CONFIG_SPL_TEXT_BASE 0x10000000
+#define CONFIG_SPL_MAX_SIZE 0x1a000
+#define CONFIG_SPL_STACK 0x1001d000
+#define CONFIG_SPL_PAD_TO 0x1c000
+#define CONFIG_SYS_TEXT_BASE 0x82000000
+
+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+#define CONFIG_SYS_MONITOR_LEN 0x80000
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_TEXT_BASE 0x40010000
+#endif
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+
+#define CONFIG_FSL_CAAM /* Enable CAAM */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_serial_clock()
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * I2C
+ */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x51
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+
+/*
+ * MMC
+ */
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_GENERIC_MMC
+
+/* SATA */
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#ifndef PCI_DEVICE_ID_FREESCALE_AHCI
+#define PCI_DEVICE_ID_FREESCALE_AHCI 0x0440
+#endif
+#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \
+ PCI_DEVICE_ID_FREESCALE_AHCI}
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* SPI */
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_SPI_FLASH_SPANSION
+
+/* QSPI */
+#define QSPI0_AMBA_BASE 0x40000000
+#define FSL_QSPI_FLASH_SIZE (1 << 24)
+#define FSL_QSPI_FLASH_NUM 2
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SPI_FLASH_SPANSION
+#endif
+
+/* DM SPI */
+#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
+#define CONFIG_CMD_SF
+#define CONFIG_DM_SPI_FLASH
+#endif
+
+/*
+ * eTSEC
+ */
+#define CONFIG_TSEC_ENET
+
+#ifdef CONFIG_TSEC_ENET
+#define CONFIG_MII
+#define CONFIG_MII_DEFAULT_TSEC 1
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC1"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC2"
+
+#define TSEC1_PHY_ADDR 1
+#define TSEC2_PHY_ADDR 3
+
+#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+
+#define CONFIG_ETHPRIME "eTSEC2"
+
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#endif
+
+/* PCIe */
+#define CONFIG_PCI /* Enable PCI/PCIE */
+#define CONFIG_PCIE1 /* PCIE controler 1 */
+#define CONFIG_PCIE2 /* PCIE controler 2 */
+
+/* Use common FSL Layerscape PCIe code */
+#define CONFIG_PCIE_LAYERSCAPE
+#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
+
+#define CONFIG_SYS_PCI_64BIT
+
+#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000
+#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */
+#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000
+#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */
+
+#define CONFIG_SYS_PCIE_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000
+#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */
+
+#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000
+#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000
+#define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */
+
+#ifdef CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_CMD_PCI
+#endif
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_CMDLINE_EDITING
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT)
+#undef CONFIG_CMD_IMLS
+#endif
+
+#define CONFIG_PEN_ADDR_BIG_ENDIAN
+#define CONFIG_LAYERSCAPE_NS_ACCESS
+#define CONFIG_SMP_PEN_ADDR 0x01ee0200
+#define CONFIG_TIMER_CLK_FREQ 12500000
+
+#define CONFIG_HWCONFIG
+#define HWCONFIG_BUFFER_SIZE 256
+
+#define CONFIG_FSL_DEVICE_DISABLE
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
+"initrd_high=0xffffffff\0" \
+"fdt_high=0xffffffff\0"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_MEMINFO
+
+#define CONFIG_SYS_LOAD_ADDR 0x82000000
+
+#define CONFIG_LS102XA_STREAM_ID
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (30 * 1024)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
+/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#endif
+
+#define CONFIG_SYS_QE_FW_ADDR 0x67f40000
+
+/*
+ * Environment
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#endif
+
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+#define CONFIG_CMD_BOOTZ
+
+#define CONFIG_MISC_INIT_R
+
+/* Hash command with SHA acceleration supported in hardware */
+
+#ifdef CONFIG_FSL_CAAM
+
+#define CONFIG_CMD_HASH
+
+#define CONFIG_SHA_HW_ACCEL
+
+#endif
+
+#include <asm/fsl_secure_boot.h>
+
+#endif
#endif
#endif
+/* LPUART */
+#ifdef CONFIG_LPUART
+#define CONFIG_LPUART_32B_REG
+#define CFG_UART_MUX_MASK 0x6
+#define CFG_UART_MUX_SHIFT 1
+#define CFG_LPUART_EN 0x2
+#endif
+
/* SATA */
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#ifdef CONFIG_FSL_DSPI
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SPI_FLASH_STMICRO
#endif
/*
* Serial Console Configuration
* STUART - the lower serial port on Colibri board
*/
-#define CONFIG_PXA_SERIAL
#define CONFIG_STUART 1
#define CONFIG_CONS_INDEX 2
#define CONFIG_BAUDRATE 115200
--- /dev/null
+/*
+ * Copyright (c) 2016 Marcel Ziswiler <marcel.ziswiler@toradex.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __SERIAL_PXA_H
+#define __SERIAL_PXA_H
+
+/*
+ * The numbering scheme differs here for PXA25x, PXA27x and PXA3xx so we can
+ * easily handle enabling of clock.
+ */
+#ifdef CONFIG_CPU_MONAHANS
+#define UART_CLK_BASE CKENA_21_BTUART
+#define UART_CLK_REG CKENA
+#define BTUART_INDEX 0
+#define FFUART_INDEX 1
+#define STUART_INDEX 2
+#elif CONFIG_CPU_PXA25X
+#define UART_CLK_BASE (1 << 4) /* HWUART */
+#define UART_CLK_REG CKEN
+#define HWUART_INDEX 0
+#define STUART_INDEX 1
+#define FFUART_INDEX 2
+#define BTUART_INDEX 3
+#else /* PXA27x */
+#define UART_CLK_BASE CKEN5_STUART
+#define UART_CLK_REG CKEN
+#define STUART_INDEX 0
+#define FFUART_INDEX 1
+#define BTUART_INDEX 2
+#endif
+
+/*
+ * Only PXA250 has HWUART, to avoid poluting the code with more macros,
+ * artificially introduce this.
+ */
+#ifndef CONFIG_CPU_PXA25X
+#define HWUART_INDEX 0xff
+#endif
+
+/*
+ * struct pxa_serial_platdata - information about a PXA port
+ *
+ * @base: Uart port base register address
+ * @port: Uart port index, for cpu with pinmux for uart / gpio
+ * baudrtatre: Uart port baudrate
+ */
+struct pxa_serial_platdata {
+ struct pxa_uart_regs *base;
+ int port;
+ int baudrate;
+};
+
+#endif /* __SERIAL_PXA_H */
CONFIG_PXA_LCD
CONFIG_PXA_MMC_GENERIC
CONFIG_PXA_PWR_I2C
-CONFIG_PXA_SERIAL
CONFIG_PXA_STD_I2C
CONFIG_PXA_VGA
CONFIG_PXA_VIDEO
projects / u-boot / commitdiff