void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
unsigned divisor);
+/**
+ * Returns the current parent clock ID of a given peripheral. This can be
+ * useful in order to call clock_*_periph_*() from generic code that has no
+ * specific knowledge of system-level clock tree structure.
+ *
+ * @param periph_id peripheral to query
+ * @return clock ID of the peripheral's current parent clock
+ */
+enum clock_id clock_get_periph_parent(enum periph_id periph_id);
+
/**
* Start a peripheral PLL clock at the given rate. This also resets the
* peripheral.
/* Returns a pointer to the given 'simple' PLL */
struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid);
+/*
+ * Given a peripheral ID, determine where the mux bits are in the peripheral
+ * clock's register, the number of divider bits the clock has, and the SoC-
+ * specific clock type.
+ *
+ * This is an internal API between the core Tegra clock code and the SoC-
+ * specific clock code.
+ *
+ * @param periph_id peripheral to query
+ * @param mux_bits Set to number of bits in mux register
+ * @param divider_bits Set to the relevant MASK_BITS_* value
+ * @param type Set to the SoC-specific clock type
+ * @return 0 on success, -1 on error
+ */
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+ int *divider_bits, int *type);
+
+/*
+ * Given a peripheral ID and clock source mux value, determine the clock_id
+ * of that peripheral's parent.
+ *
+ * This is an internal API between the core Tegra clock code and the SoC-
+ * specific clock code.
+ *
+ * @param periph_id peripheral to query
+ * @param source raw clock source mux value
+ * @return the CLOCK_ID_* value @source represents
+ */
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source);
+
/**
* Given a peripheral ID and the required source clock, this returns which
* value should be programmed into the source mux for that peripheral.
return 0;
}
+static int clock_ll_get_source_bits(enum periph_id periph_id, int mux_bits)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+ u32 val = readl(reg);
+
+ switch (mux_bits) {
+ case MASK_BITS_31_30:
+ val >>= OUT_CLK_SOURCE_31_30_SHIFT;
+ val &= OUT_CLK_SOURCE_31_30_MASK;
+ return val;
+ case MASK_BITS_31_29:
+ val >>= OUT_CLK_SOURCE_31_29_SHIFT;
+ val &= OUT_CLK_SOURCE_31_29_MASK;
+ return val;
+ case MASK_BITS_31_28:
+ val >>= OUT_CLK_SOURCE_31_28_SHIFT;
+ val &= OUT_CLK_SOURCE_31_28_MASK;
+ return val;
+ default:
+ return -1;
+ }
+}
+
void clock_ll_set_source(enum periph_id periph_id, unsigned source)
{
clock_ll_set_source_bits(periph_id, MASK_BITS_31_30, source);
return 0;
}
+enum clock_id clock_get_periph_parent(enum periph_id periph_id)
+{
+ int err, mux_bits, divider_bits, type;
+ int source;
+
+ err = get_periph_clock_info(periph_id, &mux_bits, ÷r_bits, &type);
+ if (err)
+ return CLOCK_ID_NONE;
+
+ source = clock_ll_get_source_bits(periph_id, mux_bits);
+
+ return get_periph_clock_id(periph_id, source);
+}
+
unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
enum clock_id parent, unsigned rate, int *extra_div)
{
return &clkrst->crc_clk_src[internal_id];
}
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+ int *divider_bits, int *type)
+{
+ enum periphc_internal_id internal_id;
+
+ if (!clock_periph_id_isvalid(periph_id))
+ return -1;
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ if (!periphc_internal_id_isvalid(internal_id))
+ return -1;
+
+ *type = clock_periph_type[internal_id];
+ if (!clock_type_id_isvalid(*type))
+ return -1;
+
+ *mux_bits = clock_source[*type][CLOCK_MAX_MUX];
+
+ if (*type == CLOCK_TYPE_PCMT16)
+ *divider_bits = 16;
+ else
+ *divider_bits = 8;
+
+ return 0;
+}
+
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
+{
+ enum periphc_internal_id internal_id;
+ int type;
+
+ if (!clock_periph_id_isvalid(periph_id))
+ return CLOCK_ID_NONE;
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ if (!periphc_internal_id_isvalid(internal_id))
+ return CLOCK_ID_NONE;
+
+ type = clock_periph_type[internal_id];
+ if (!clock_type_id_isvalid(type))
+ return CLOCK_ID_NONE;
+
+ return clock_source[type][source];
+}
+
/**
* Given a peripheral ID and the required source clock, this returns which
* value should be programmed into the source mux for that peripheral.
enum clock_id parent, int *mux_bits, int *divider_bits)
{
enum clock_type_id type;
- enum periphc_internal_id internal_id;
- int mux;
-
- assert(clock_periph_id_isvalid(periph_id));
+ int mux, err;
- internal_id = periph_id_to_internal_id[periph_id];
- assert(periphc_internal_id_isvalid(internal_id));
-
- type = clock_periph_type[internal_id];
- assert(clock_type_id_isvalid(type));
-
- *mux_bits = clock_source[type][CLOCK_MAX_MUX];
-
- if (type == CLOCK_TYPE_PCMT16)
- *divider_bits = 16;
- else
- *divider_bits = 8;
+ err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
+ assert(!err);
for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
if (clock_source[type][mux] == parent)
}
}
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+ int *divider_bits, int *type)
+{
+ enum periphc_internal_id internal_id;
+
+ if (!clock_periph_id_isvalid(periph_id))
+ return -1;
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ if (!periphc_internal_id_isvalid(internal_id))
+ return -1;
+
+ *type = clock_periph_type[internal_id];
+ if (!clock_type_id_isvalid(*type))
+ return -1;
+
+ *mux_bits = clock_source[*type][CLOCK_MAX_MUX];
+
+ if (*type == CLOCK_TYPE_PC2CC3M_T16)
+ *divider_bits = 16;
+ else
+ *divider_bits = 8;
+
+ return 0;
+}
+
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
+{
+ enum periphc_internal_id internal_id;
+ int type;
+
+ if (!clock_periph_id_isvalid(periph_id))
+ return CLOCK_ID_NONE;
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ if (!periphc_internal_id_isvalid(internal_id))
+ return CLOCK_ID_NONE;
+
+ type = clock_periph_type[internal_id];
+ if (!clock_type_id_isvalid(type))
+ return CLOCK_ID_NONE;
+
+ return clock_source[type][source];
+}
+
/**
* Given a peripheral ID and the required source clock, this returns which
* value should be programmed into the source mux for that peripheral.
enum clock_id parent, int *mux_bits, int *divider_bits)
{
enum clock_type_id type;
- enum periphc_internal_id internal_id;
- int mux;
-
- assert(clock_periph_id_isvalid(periph_id));
-
- internal_id = periph_id_to_internal_id[periph_id];
- assert(periphc_internal_id_isvalid(internal_id));
-
- type = clock_periph_type[internal_id];
- assert(clock_type_id_isvalid(type));
+ int mux, err;
- *mux_bits = clock_source[type][CLOCK_MAX_MUX];
-
- if (type == CLOCK_TYPE_PC2CC3M_T16)
- *divider_bits = 16;
- else
- *divider_bits = 8;
+ err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
+ assert(!err);
for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
if (clock_source[type][mux] == parent)
return &clkrst->crc_clk_src[internal_id];
}
-/**
- * Given a peripheral ID and the required source clock, this returns which
- * value should be programmed into the source mux for that peripheral.
- *
- * There is special code here to handle the one source type with 5 sources.
- *
- * @param periph_id peripheral to start
- * @param source PLL id of required parent clock
- * @param mux_bits Set to number of bits in mux register: 2 or 4
- * @param divider_bits Set to number of divider bits (8 or 16)
- * @return mux value (0-4, or -1 if not found)
- */
-int get_periph_clock_source(enum periph_id periph_id,
- enum clock_id parent, int *mux_bits, int *divider_bits)
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+ int *divider_bits, int *type)
{
- enum clock_type_id type;
enum periphc_internal_id internal_id;
- int mux;
- assert(clock_periph_id_isvalid(periph_id));
+ if (!clock_periph_id_isvalid(periph_id))
+ return -1;
internal_id = periph_id_to_internal_id[periph_id];
- assert(periphc_internal_id_isvalid(internal_id));
+ if (!periphc_internal_id_isvalid(internal_id))
+ return -1;
- type = clock_periph_type[internal_id];
- assert(clock_type_id_isvalid(type));
+ *type = clock_periph_type[internal_id];
+ if (!clock_type_id_isvalid(*type))
+ return -1;
/*
* Special cases here for the clock with a 4-bit source mux and I2C
* with its 16-bit divisor
*/
- if (type == CLOCK_TYPE_PCXTS)
+ if (*type == CLOCK_TYPE_PCXTS)
*mux_bits = MASK_BITS_31_28;
else
*mux_bits = MASK_BITS_31_30;
- if (type == CLOCK_TYPE_PCMT16)
+ if (*type == CLOCK_TYPE_PCMT16)
*divider_bits = 16;
else
*divider_bits = 8;
+ return 0;
+}
+
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
+{
+ enum periphc_internal_id internal_id;
+ int type;
+
+ if (!clock_periph_id_isvalid(periph_id))
+ return CLOCK_ID_NONE;
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ if (!periphc_internal_id_isvalid(internal_id))
+ return CLOCK_ID_NONE;
+
+ type = clock_periph_type[internal_id];
+ if (!clock_type_id_isvalid(type))
+ return CLOCK_ID_NONE;
+
+ return clock_source[type][source];
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id peripheral to start
+ * @param source PLL id of required parent clock
+ * @param mux_bits Set to number of bits in mux register: 2 or 4
+ * @param divider_bits Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+ enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+ enum clock_type_id type;
+ int mux, err;
+
+ err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
+ assert(!err);
+
for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
if (clock_source[type][mux] == parent)
return mux;
return &clkrst->crc_clk_src_y[internal_id];
}
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+ int *divider_bits, int *type)
+{
+ enum periphc_internal_id internal_id;
+
+ if (!clock_periph_id_isvalid(periph_id))
+ return -1;
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ if (!periphc_internal_id_isvalid(internal_id))
+ return -1;
+
+ *type = clock_periph_type[internal_id];
+ if (!clock_type_id_isvalid(*type))
+ return -1;
+
+ *mux_bits = clock_source[*type][CLOCK_MAX_MUX];
+
+ if (*type == CLOCK_TYPE_PC2CC3M_T16)
+ *divider_bits = 16;
+ else
+ *divider_bits = 8;
+
+ return 0;
+}
+
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
+{
+ enum periphc_internal_id internal_id;
+ int type;
+
+ if (!clock_periph_id_isvalid(periph_id))
+ return CLOCK_ID_NONE;
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ if (!periphc_internal_id_isvalid(internal_id))
+ return CLOCK_ID_NONE;
+
+ type = clock_periph_type[internal_id];
+ if (!clock_type_id_isvalid(type))
+ return CLOCK_ID_NONE;
+
+ return clock_source[type][source];
+}
+
/**
* Given a peripheral ID and the required source clock, this returns which
* value should be programmed into the source mux for that peripheral.
enum clock_id parent, int *mux_bits, int *divider_bits)
{
enum clock_type_id type;
- enum periphc_internal_id internal_id;
- int mux;
-
- assert(clock_periph_id_isvalid(periph_id));
+ int mux, err;
- internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]);
- assert(periphc_internal_id_isvalid(internal_id));
-
- type = clock_periph_type[internal_id];
- assert(clock_type_id_isvalid(type));
-
- *mux_bits = clock_source[type][CLOCK_MAX_MUX];
-
- if (type == CLOCK_TYPE_PC2CC3M_T16)
- *divider_bits = 16;
- else
- *divider_bits = 8;
+ err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
+ assert(!err);
for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
if (clock_source[type][mux] == parent)
return &clkrst->crc_clk_src[internal_id];
}
+int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
+ int *divider_bits, int *type)
+{
+ enum periphc_internal_id internal_id;
+
+ if (!clock_periph_id_isvalid(periph_id))
+ return -1;
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ if (!periphc_internal_id_isvalid(internal_id))
+ return -1;
+
+ *type = clock_periph_type[internal_id];
+ if (!clock_type_id_isvalid(*type))
+ return -1;
+
+ *mux_bits = clock_source[*type][CLOCK_MAX_MUX];
+
+ if (*type == CLOCK_TYPE_PCMT16)
+ *divider_bits = 16;
+ else
+ *divider_bits = 8;
+
+ return 0;
+}
+
+enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
+{
+ enum periphc_internal_id internal_id;
+ int type;
+
+ if (!clock_periph_id_isvalid(periph_id))
+ return CLOCK_ID_NONE;
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ if (!periphc_internal_id_isvalid(internal_id))
+ return CLOCK_ID_NONE;
+
+ type = clock_periph_type[internal_id];
+ if (!clock_type_id_isvalid(type))
+ return CLOCK_ID_NONE;
+
+ return clock_source[type][source];
+}
+
/**
* Given a peripheral ID and the required source clock, this returns which
* value should be programmed into the source mux for that peripheral.
enum clock_id parent, int *mux_bits, int *divider_bits)
{
enum clock_type_id type;
- enum periphc_internal_id internal_id;
- int mux;
-
- assert(clock_periph_id_isvalid(periph_id));
-
- internal_id = periph_id_to_internal_id[periph_id];
- assert(periphc_internal_id_isvalid(internal_id));
-
- type = clock_periph_type[internal_id];
- assert(clock_type_id_isvalid(type));
+ int mux, err;
- *mux_bits = clock_source[type][CLOCK_MAX_MUX];
-
- if (type == CLOCK_TYPE_PCMT16)
- *divider_bits = 16;
- else
- *divider_bits = 8;
+ err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
+ assert(!err);
for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
if (clock_source[type][mux] == parent)