*/
void sequoia_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
{
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIR2);
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2);
}
#endif
#elif defined (CONFIG_405GP)
printf ("\n405GP registers; MSR=%08x\n",mfmsr());
printf ("\nUniversal Interrupt Controller Regs\n"
- "uicsr uicsrs uicer uiccr uicpr uictr uicmsr uicvr uicvcr"
+ "uicsr uicer uiccr uicpr uictr uicmsr uicvr uicvcr"
"\n"
- "%08x %08x %08x %08x %08x %08x %08x %08x %08x\n",
+ "%08x %08x %08x %08x %08x %08x %08x %08x\n",
mfdcr(uicsr),
- mfdcr(uicsrs),
mfdcr(uicer),
mfdcr(uiccr),
mfdcr(uicpr),
* Defines for MAL/EMAC interrupt conditions as reported in the UIC (Universal
* Interrupt Controller).
*-----------------------------------------------------------------------------*/
-#define MAL_UIC_ERR ( UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)
-#define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR)
-#define EMAC_UIC_DEF UIC_ENET
-#define EMAC_UIC_DEF1 UIC_ENET1
-#define SEL_UIC_DEF(p) (p ? UIC_ENET1 : UIC_ENET )
+#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev) * VECNUM_ETH1_OFFS))
+
+#if defined(CONFIG_HAS_ETH3)
+#if !defined(CONFIG_440GX)
+#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)) || \
+ UIC_MASK(ETH_IRQ_NUM(2)) || UIC_MASK(ETH_IRQ_NUM(3)))
+#else
+/* Unfortunately 440GX spreads EMAC interrupts on multiple UIC's */
+#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)))
+#define UIC_ETHxB (UIC_MASK(ETH_IRQ_NUM(2)) || UIC_MASK(ETH_IRQ_NUM(3)))
+#endif /* !defined(CONFIG_440GX) */
+#elif defined(CONFIG_HAS_ETH2)
+#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)) || \
+ UIC_MASK(ETH_IRQ_NUM(2)))
+#elif defined(CONFIG_HAS_ETH1)
+#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)))
+#else
+#define UIC_ETHx UIC_MASK(ETH_IRQ_NUM(0))
+#endif
+
+/*
+ * Define a default version for UIC_ETHxB for non 440GX so that we can
+ * use common code for all 4xx variants
+ */
+#if !defined(UIC_ETHxB)
+#define UIC_ETHxB 0
+#endif
+
+#define UIC_MAL_SERR UIC_MASK(VECNUM_MAL_SERR)
+#define UIC_MAL_TXDE UIC_MASK(VECNUM_MAL_TXDE)
+#define UIC_MAL_RXDE UIC_MASK(VECNUM_MAL_RXDE)
+#define UIC_MAL_TXEOB UIC_MASK(VECNUM_MAL_TXEOB)
+#define UIC_MAL_RXEOB UIC_MASK(VECNUM_MAL_RXEOB)
+
+#define MAL_UIC_ERR (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)
+#define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR)
+
+/*
+ * We have 3 different interrupt types:
+ * - MAL interrupts indicating successful transfer
+ * - MAL error interrupts indicating MAL related errors
+ * - EMAC interrupts indicating EMAC related errors
+ *
+ * All those interrupts can be on different UIC's, but since
+ * now at least all interrupts from one type are on the same
+ * UIC. Only exception is 440GX where the EMAC interrupts are
+ * spread over two UIC's!
+ */
+#define UIC_BASE_MAL (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_TXEOB) * 0x10))
+#define UIC_BASE_MAL_ERR (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_SERR) * 0x10))
+#define UIC_BASE_EMAC (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10))
+#if defined(CONFIG_440GX)
+#define UIC_BASE_EMAC_B (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(2)) * 0x10))
+#else
+#define UIC_BASE_EMAC_B (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10))
+#endif
#undef INFO_4XX_ENET
/*-----------------------------------------------------------------------------+
* Global variables. TX and RX descriptors and buffers.
*-----------------------------------------------------------------------------*/
-/* IER globals */
-static uint32_t mal_ier;
-
#if !defined(CONFIG_NET_MULTI)
struct eth_device *emac0_dev = NULL;
#endif
#define CONFIG_EMAC_NR_START 0
#endif
-#if defined(CONFIG_405EX) || defined(CONFIG_440EPX)
-#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev)))
-#else
-#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev) * 2))
-#endif
-
#define MAL_RX_DESC_SIZE 2048
#define MAL_TX_DESC_SIZE 2048
#define MAL_ALLOC_SIZE (MAL_TX_DESC_SIZE + MAL_RX_DESC_SIZE)
}
}
-
-#if defined (CONFIG_440) || defined(CONFIG_405EX)
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-/*
- * Hack: On 440SP all enet irq sources are located on UIC1
- * Needs some cleanup. --sr
- */
-#define UIC0MSR uic1msr
-#define UIC0SR uic1sr
-#define UIC1MSR uic1msr
-#define UIC1SR uic1sr
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-/*
- * Hack: On 460EX/GT all enet irq sources are located on UIC2
- * Needs some cleanup. --ag
- */
-#define UIC0MSR uic2msr
-#define UIC0SR uic2sr
-#define UIC1MSR uic2msr
-#define UIC1SR uic2sr
-#else
-#define UIC0MSR uic0msr
-#define UIC0SR uic0sr
-#define UIC1MSR uic1msr
-#define UIC1SR uic1sr
-#endif
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
-#define UICMSR_ETHX uic0msr
-#define UICSR_ETHX uic0sr
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UICMSR_ETHX uic2msr
-#define UICSR_ETHX uic2sr
-#else
-#define UICMSR_ETHX uic1msr
-#define UICSR_ETHX uic1sr
-#endif
-
int enetInt (struct eth_device *dev)
{
int serviced;
int rc = -1; /* default to not us */
- unsigned long mal_isr;
- unsigned long emac_isr = 0;
- unsigned long mal_rx_eob;
- unsigned long my_uic0msr, my_uic1msr;
- unsigned long my_uicmsr_ethx;
-
-#if defined(CONFIG_440GX)
- unsigned long my_uic2msr;
-#endif
+ u32 mal_isr;
+ u32 emac_isr = 0;
+ u32 mal_eob;
+ u32 uic_mal;
+ u32 uic_mal_err;
+ u32 uic_emac;
+ u32 uic_emac_b;
EMAC_4XX_HW_PST hw_p;
/*
do {
serviced = 0;
- my_uic0msr = mfdcr (UIC0MSR);
- my_uic1msr = mfdcr (UIC1MSR);
-#if defined(CONFIG_440GX)
- my_uic2msr = mfdcr (uic2msr);
-#endif
- my_uicmsr_ethx = mfdcr (UICMSR_ETHX);
+ uic_mal = mfdcr(UIC_BASE_MAL + UIC_MSR);
+ uic_mal_err = mfdcr(UIC_BASE_MAL_ERR + UIC_MSR);
+ uic_emac = mfdcr(UIC_BASE_EMAC + UIC_MSR);
+ uic_emac_b = mfdcr(UIC_BASE_EMAC_B + UIC_MSR);
- if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
- && !(my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))
- && !(my_uicmsr_ethx & (UIC_ETH0 | UIC_ETH1))) {
- /* not for us */
- return (rc);
- }
-#if defined (CONFIG_440GX)
- if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
- && !(my_uic2msr & (UIC_ETH2 | UIC_ETH3))) {
+ if (!(uic_mal & (UIC_MAL_RXEOB | UIC_MAL_TXEOB))
+ && !(uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE))
+ && !(uic_emac & UIC_ETHx) && !(uic_emac_b & UIC_ETHxB)) {
/* not for us */
return (rc);
}
-#endif
+
/* get and clear controller status interrupts */
- /* look at Mal and EMAC interrupts */
- if ((my_uic0msr & (UIC_MRE | UIC_MTE))
- || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- /* we have a MAL interrupt */
- mal_isr = mfdcr (malesr);
- /* look for mal error */
- if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) {
- mal_err (dev, mal_isr, my_uic1msr, MAL_UIC_DEF, MAL_UIC_ERR);
- serviced = 1;
- rc = 0;
- }
- }
+ /* look at MAL and EMAC error interrupts */
+ if (uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)) {
+ /* we have a MAL error interrupt */
+ mal_isr = mfdcr(malesr);
+ mal_err(dev, mal_isr, uic_mal_err,
+ MAL_UIC_DEF, MAL_UIC_ERR);
- /* port by port dispatch of emac interrupts */
- if (hw_p->devnum == 0) {
- if (UIC_ETH0 & my_uicmsr_ethx) { /* look for EMAC errors */
- emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
- if ((hw_p->emac_ier & emac_isr) != 0) {
- emac_err (dev, emac_isr);
- serviced = 1;
- rc = 0;
- }
- }
- if ((hw_p->emac_ier & emac_isr)
- || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
- mtdcr (UICSR_ETHX, UIC_ETH0); /* Clear */
- return (rc); /* we had errors so get out */
- }
- }
+ /* clear MAL error interrupt status bits */
+ mtdcr(UIC_BASE_MAL_ERR + UIC_SR,
+ UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE);
-#if !defined(CONFIG_440SP)
- if (hw_p->devnum == 1) {
- if (UIC_ETH1 & my_uicmsr_ethx) { /* look for EMAC errors */
- emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
- if ((hw_p->emac_ier & emac_isr) != 0) {
- emac_err (dev, emac_isr);
- serviced = 1;
- rc = 0;
- }
- }
- if ((hw_p->emac_ier & emac_isr)
- || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
- mtdcr (UICSR_ETHX, UIC_ETH1); /* Clear */
- return (rc); /* we had errors so get out */
- }
- }
-#if defined (CONFIG_440GX)
- if (hw_p->devnum == 2) {
- if (UIC_ETH2 & my_uic2msr) { /* look for EMAC errors */
- emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
- if ((hw_p->emac_ier & emac_isr) != 0) {
- emac_err (dev, emac_isr);
- serviced = 1;
- rc = 0;
- }
- }
- if ((hw_p->emac_ier & emac_isr)
- || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
- mtdcr (uic2sr, UIC_ETH2);
- return (rc); /* we had errors so get out */
- }
+ return -1;
}
- if (hw_p->devnum == 3) {
- if (UIC_ETH3 & my_uic2msr) { /* look for EMAC errors */
- emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
- if ((hw_p->emac_ier & emac_isr) != 0) {
- emac_err (dev, emac_isr);
- serviced = 1;
- rc = 0;
- }
- }
- if ((hw_p->emac_ier & emac_isr)
- || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
- mtdcr (uic2sr, UIC_ETH3);
- return (rc); /* we had errors so get out */
- }
- }
-#endif /* CONFIG_440GX */
-#endif /* !CONFIG_440SP */
+ /* look for EMAC errors */
+ if ((uic_emac & UIC_ETHx) || (uic_emac_b & UIC_ETHxB)) {
+ emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
+ emac_err(dev, emac_isr);
- /* handle MAX TX EOB interrupt from a tx */
- if (my_uic0msr & UIC_MTE) {
- mal_rx_eob = mfdcr (maltxeobisr);
- mtdcr (maltxeobisr, mal_rx_eob);
- mtdcr (UIC0SR, UIC_MTE);
- }
- /* handle MAL RX EOB interupt from a receive */
- /* check for EOB on valid channels */
- if (my_uic0msr & UIC_MRE) {
- mal_rx_eob = mfdcr (malrxeobisr);
- if ((mal_rx_eob &
- (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL)))
- != 0) { /* call emac routine for channel x */
- /* clear EOB
- mtdcr(malrxeobisr, mal_rx_eob); */
- enet_rcv (dev, emac_isr);
- /* indicate that we serviced an interrupt */
- serviced = 1;
- rc = 0;
- }
- }
+ /* clear EMAC error interrupt status bits */
+ mtdcr(UIC_BASE_EMAC + UIC_SR, UIC_ETHx);
+ mtdcr(UIC_BASE_EMAC_B + UIC_SR, UIC_ETHxB);
- mtdcr (UIC0SR, UIC_MRE); /* Clear */
- mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
- switch (hw_p->devnum) {
- case 0:
- mtdcr (UICSR_ETHX, UIC_ETH0);
- break;
- case 1:
- mtdcr (UICSR_ETHX, UIC_ETH1);
- break;
-#if defined (CONFIG_440GX)
- case 2:
- mtdcr (uic2sr, UIC_ETH2);
- break;
- case 3:
- mtdcr (uic2sr, UIC_ETH3);
- break;
-#endif /* CONFIG_440GX */
- default:
- break;
+ return -1;
}
- } while (serviced);
-
- return (rc);
-}
-
-#else /* CONFIG_440 */
-
-int enetInt (struct eth_device *dev)
-{
- int serviced;
- int rc = -1; /* default to not us */
- unsigned long mal_isr;
- unsigned long emac_isr = 0;
- unsigned long mal_rx_eob;
- unsigned long my_uicmsr;
-
- EMAC_4XX_HW_PST hw_p;
-
- /*
- * Because the mal is generic, we need to get the current
- * eth device
- */
-#if defined(CONFIG_NET_MULTI)
- dev = eth_get_dev();
-#else
- dev = emac0_dev;
-#endif
- hw_p = dev->priv;
-
- /* enter loop that stays in interrupt code until nothing to service */
- do {
- serviced = 0;
-
- my_uicmsr = mfdcr (uicmsr);
-
- if ((my_uicmsr & (MAL_UIC_DEF | EMAC_UIC_DEF)) == 0) { /* not for us */
- return (rc);
- }
- /* get and clear controller status interrupts */
- /* look at Mal and EMAC interrupts */
- if ((MAL_UIC_DEF & my_uicmsr) != 0) { /* we have a MAL interrupt */
- mal_isr = mfdcr (malesr);
- /* look for mal error */
- if ((my_uicmsr & MAL_UIC_ERR) != 0) {
- mal_err (dev, mal_isr, my_uicmsr, MAL_UIC_DEF, MAL_UIC_ERR);
- serviced = 1;
- rc = 0;
- }
+ /* handle MAX TX EOB interrupt from a tx */
+ if (uic_mal & UIC_MAL_TXEOB) {
+ /* clear MAL interrupt status bits */
+ mal_eob = mfdcr(maltxeobisr);
+ mtdcr(maltxeobisr, mal_eob);
+ mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_TXEOB);
+
+ /* indicate that we serviced an interrupt */
+ serviced = 1;
+ rc = 0;
}
- /* port by port dispatch of emac interrupts */
+ /* handle MAL RX EOB interupt from a receive */
+ /* check for EOB on valid channels */
+ if (uic_mal & UIC_MAL_RXEOB) {
+ mal_eob = mfdcr(malrxeobisr);
+ if (mal_eob &
+ (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL))) {
+ /* push packet to upper layer */
+ enet_rcv(dev, emac_isr);
- if ((SEL_UIC_DEF(hw_p->devnum) & my_uicmsr) != 0) { /* look for EMAC errors */
- emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
- if ((hw_p->emac_ier & emac_isr) != 0) {
- emac_err (dev, emac_isr);
- serviced = 1;
- rc = 0;
- }
- }
- if (((hw_p->emac_ier & emac_isr) != 0) || ((MAL_UIC_ERR & my_uicmsr) != 0)) {
- mtdcr (uicsr, MAL_UIC_DEF | SEL_UIC_DEF(hw_p->devnum)); /* Clear */
- return (rc); /* we had errors so get out */
- }
+ /* clear MAL interrupt status bits */
+ mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_RXEOB);
- /* handle MAX TX EOB interrupt from a tx */
- if (my_uicmsr & UIC_MAL_TXEOB) {
- mal_rx_eob = mfdcr (maltxeobisr);
- mtdcr (maltxeobisr, mal_rx_eob);
- mtdcr (uicsr, UIC_MAL_TXEOB);
- }
- /* handle MAL RX EOB interupt from a receive */
- /* check for EOB on valid channels */
- if (my_uicmsr & UIC_MAL_RXEOB)
- {
- mal_rx_eob = mfdcr (malrxeobisr);
- if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */
- /* clear EOB
- mtdcr(malrxeobisr, mal_rx_eob); */
- enet_rcv (dev, emac_isr);
/* indicate that we serviced an interrupt */
serviced = 1;
rc = 0;
}
}
- mtdcr (uicsr, MAL_UIC_DEF|EMAC_UIC_DEF|EMAC_UIC_DEF1); /* Clear */
-#if defined(CONFIG_405EZ)
- mtsdr (sdricintstat, SDR_ICRX_STAT | SDR_ICTX0_STAT | SDR_ICTX1_STAT);
-#endif /* defined(CONFIG_405EZ) */
- }
- while (serviced);
+ } while (serviced);
return (rc);
}
-#endif /* CONFIG_440 */
-
/*-----------------------------------------------------------------------------+
* MAL Error Routine
*-----------------------------------------------------------------------------*/
EMAC_4XX_HW_PST hw = NULL;
u8 ethaddr[4 + CONFIG_EMAC_NR_START][6];
u32 hw_addr[4];
+ u32 mal_ier;
#if defined(CONFIG_440GX)
unsigned long pfc1;
mtdcr (malier, mal_ier);
/* install MAL interrupt handler */
- irq_install_handler (VECNUM_MS,
+ irq_install_handler (VECNUM_MAL_SERR,
(interrupt_handler_t *) enetInt,
dev);
- irq_install_handler (VECNUM_MTE,
+ irq_install_handler (VECNUM_MAL_TXEOB,
(interrupt_handler_t *) enetInt,
dev);
- irq_install_handler (VECNUM_MRE,
+ irq_install_handler (VECNUM_MAL_RXEOB,
(interrupt_handler_t *) enetInt,
dev);
- irq_install_handler (VECNUM_TXDE,
+ irq_install_handler (VECNUM_MAL_TXDE,
(interrupt_handler_t *) enetInt,
dev);
- irq_install_handler (VECNUM_RXDE,
+ irq_install_handler (VECNUM_MAL_RXDE,
(interrupt_handler_t *) enetInt,
dev);
virgin = 1;
#include <ppc_asm.tmpl>
#include <commproc.h>
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Define the number of UIC's
- */
-#if defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UIC_MAX 4
-#elif defined(CONFIG_440GX) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
-#define UIC_MAX 3
-#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define UIC_MAX 2
+#if (UIC_MAX > 3)
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
+ UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI) | \
+ UIC_MASK(VECNUM_UIC3CI) | UIC_MASK(VECNUM_UIC3NCI))
+#elif (UIC_MAX > 2)
+#if defined(CONFIG_440GX)
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC0CI) | UIC_MASK(VECNUM_UIC0NCI) | \
+ UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
+ UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI))
+#else
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
+ UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI))
+#endif
+#elif (UIC_MAX > 1)
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI))
#else
-#define UIC_MAX 1
+#define UICB0_ALL 0
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* CPM interrupt vector functions.
*/
#if !defined(CONFIG_440GX)
#if (UIC_MAX > 1)
/* Install the UIC1 handlers */
- irq_install_handler(VECNUM_UIC1NC, uic_cascade_interrupt, 0);
- irq_install_handler(VECNUM_UIC1C, uic_cascade_interrupt, 0);
+ irq_install_handler(VECNUM_UIC1NCI, uic_cascade_interrupt, 0);
+ irq_install_handler(VECNUM_UIC1CI, uic_cascade_interrupt, 0);
#endif
#if (UIC_MAX > 2)
- irq_install_handler(VECNUM_UIC2NC, uic_cascade_interrupt, 0);
- irq_install_handler(VECNUM_UIC2C, uic_cascade_interrupt, 0);
+ irq_install_handler(VECNUM_UIC2NCI, uic_cascade_interrupt, 0);
+ irq_install_handler(VECNUM_UIC2CI, uic_cascade_interrupt, 0);
#endif
#if (UIC_MAX > 3)
- irq_install_handler(VECNUM_UIC3NC, uic_cascade_interrupt, 0);
- irq_install_handler(VECNUM_UIC3C, uic_cascade_interrupt, 0);
+ irq_install_handler(VECNUM_UIC3NCI, uic_cascade_interrupt, 0);
+ irq_install_handler(VECNUM_UIC3CI, uic_cascade_interrupt, 0);
#endif
#else /* !defined(CONFIG_440GX) */
+ /*
+ * ToDo: Remove this 440GX special handling:
+ * Move SDR0_MFR setup to cpu.c and use common code with UICB0
+ * on 440GX. 2008-06-26, sr
+ */
/* Take the GX out of compatibility mode
* Travis Sawyer, 9 Mar 2004
* NOTE: 440gx user manual inconsistency here
/* Enable UIC interrupts via UIC Base Enable Register */
mtdcr(uicb0sr, UICB0_ALL);
- mtdcr(uicb0er, 0x54000000);
+ mtdcr(uicb0er, UICB0_ALL);
/* None are critical */
mtdcr(uicb0cr, 0);
#endif /* !defined(CONFIG_440GX) */
(*irq_vecs[vec].handler)(irq_vecs[vec].arg);
} else {
set_dcr(uic_base + UIC_ER,
- get_dcr(uic_base + UIC_ER) &
- ~(0x80000000 >> (vec & 0x1f)));
+ get_dcr(uic_base + UIC_ER) & ~UIC_MASK(vec));
printf("Masking bogus interrupt vector %d"
" (UIC_BASE=0x%x)\n", vec, uic_base);
}
* After servicing the interrupt, we have to remove the
* status indicator
*/
- set_dcr(uic_base + UIC_SR, (0x80000000 >> (vec & 0x1f)));
+ set_dcr(uic_base + UIC_SR, UIC_MASK(vec));
}
/*
}
#endif
-#if defined(CONFIG_440)
#if defined(CONFIG_440GX)
/* 440GX uses base uic register */
#define UIC_BMSR uicb0msr
#define UIC_BMSR uic0msr
#define UIC_BSR uic0sr
#endif
-#else /* CONFIG_440 */
-#define UIC_BMSR uicmsr
-#define UIC_BSR uicsr
-#endif /* CONFIG_440 */
/*
* Handle external interrupts
uic_msr = mfdcr(UIC_BMSR);
#if (UIC_MAX > 1)
- if ((UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr))
+ if ((UIC_MASK(VECNUM_UIC1CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC1NCI) & uic_msr))
uic_interrupt(UIC1_DCR_BASE, 32);
#endif
#if (UIC_MAX > 2)
- if ((UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr))
+ if ((UIC_MASK(VECNUM_UIC2CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC2NCI) & uic_msr))
uic_interrupt(UIC2_DCR_BASE, 64);
#endif
#if (UIC_MAX > 3)
- if ((UICB0_UIC3CI & uic_msr) || (UICB0_UIC3NCI & uic_msr))
+ if ((UIC_MASK(VECNUM_UIC3CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC3NCI) & uic_msr))
uic_interrupt(UIC3_DCR_BASE, 96);
#endif
if (uic_msr & ~(UICB0_ALL))
uic_interrupt(UIC0_DCR_BASE, 0);
#else
- if ((UICB0_UIC0CI & uic_msr) || (UICB0_UIC0NCI & uic_msr))
+ if ((UIC_MASK(VECNUM_UIC0CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC0NCI) & uic_msr))
uic_interrupt(UIC0_DCR_BASE, 0);
#endif
#else /* CONFIG_440 */
/*enable interrupts */
*(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
- irq_install_handler(VECNUM_HSB2D, (interrupt_handler_t *) usbInt,
+ irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
NULL);
}
#else
#ifndef _PPC4xx_UIC_H_
#define _PPC4xx_UIC_H_
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-/* UIC 0 */
-#define VECNUM_U0 0 /* UART 0 */
-#define VECNUM_U1 1 /* UART 1 */
-#define VECNUM_IIC0 2 /* IIC */
-#define VECNUM_KRD 3 /* Kasumi Ready for data */
-#define VECNUM_KDA 4 /* Kasumi Data Available */
-#define VECNUM_PCRW 5 /* PCI command register write */
-#define VECNUM_PPM 6 /* PCI power management */
-#define VECNUM_IIC1 7 /* IIC */
-#define VECNUM_SPI 8 /* SPI */
-#define VECNUM_EPCISER 9 /* External PCI SERR */
-#define VECNUM_MTE 10 /* MAL TXEOB */
-#define VECNUM_MRE 11 /* MAL RXEOB */
-#define VECNUM_D0 12 /* DMA channel 0 */
-#define VECNUM_D1 13 /* DMA channel 1 */
-#define VECNUM_D2 14 /* DMA channel 2 */
-#define VECNUM_D3 15 /* DMA channel 3 */
-#define VECNUM_UD0 16 /* UDMA irq 0 */
-#define VECNUM_UD1 17 /* UDMA irq 1 */
-#define VECNUM_UD2 18 /* UDMA irq 2 */
-#define VECNUM_UD3 19 /* UDMA irq 3 */
-#define VECNUM_HSB2D 20 /* USB2.0 Device */
-#define VECNUM_USBDEV 20 /* USB 1.1/USB 2.0 Device */
-#define VECNUM_OHCI1 21 /* USB2.0 Host OHCI irq 1 */
-#define VECNUM_OHCI2 22 /* USB2.0 Host OHCI irq 2 */
-#define VECNUM_EIP94 23 /* Security EIP94 */
-#define VECNUM_ETH0 24 /* Emac 0 */
-#define VECNUM_ETH1 25 /* Emac 1 */
-#define VECNUM_EHCI 26 /* USB2.0 Host EHCI */
-#define VECNUM_EIR4 27 /* External interrupt 4 */
-#define VECNUM_UIC2NC 28 /* UIC2 non-critical interrupt */
-#define VECNUM_UIC2C 29 /* UIC2 critical interrupt */
-#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
-#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
-
-/* UIC 1 */
-#define VECNUM_MS (32 + 0) /* MAL SERR */
-#define VECNUM_MTDE (32 + 1) /* MAL TXDE */
-#define VECNUM_MRDE (32 + 2) /* MAL RXDE */
-#define VECNUM_U2 (32 + 3) /* UART 2 */
-#define VECNUM_U3 (32 + 4) /* UART 3 */
-#define VECNUM_EBCO (32 + 5) /* EBCO interrupt status */
-#define VECNUM_NDFC (32 + 6) /* NDFC */
-#define VECNUM_KSLE (32 + 7) /* KASUMI slave error */
-#define VECNUM_CT5 (32 + 8) /* GPT compare timer 5 */
-#define VECNUM_CT6 (32 + 9) /* GPT compare timer 6 */
-#define VECNUM_PLB34I0 (32 + 10) /* PLB3X4X MIRQ0 */
-#define VECNUM_PLB34I1 (32 + 11) /* PLB3X4X MIRQ1 */
-#define VECNUM_PLB34I2 (32 + 12) /* PLB3X4X MIRQ2 */
-#define VECNUM_PLB34I3 (32 + 13) /* PLB3X4X MIRQ3 */
-#define VECNUM_PLB34I4 (32 + 14) /* PLB3X4X MIRQ4 */
-#define VECNUM_PLB34I5 (32 + 15) /* PLB3X4X MIRQ5 */
-#define VECNUM_CT0 (32 + 16) /* GPT compare timer 0 */
-#define VECNUM_CT1 (32 + 17) /* GPT compare timer 1 */
-#define VECNUM_EIR7 (32 + 18) /* External interrupt 7 */
-#define VECNUM_EIR8 (32 + 19) /* External interrupt 8 */
-#define VECNUM_EIR9 (32 + 20) /* External interrupt 9 */
-#define VECNUM_CT2 (32 + 21) /* GPT compare timer 2 */
-#define VECNUM_CT3 (32 + 22) /* GPT compare timer 3 */
-#define VECNUM_CT4 (32 + 23) /* GPT compare timer 4 */
-#define VECNUM_SRE (32 + 24) /* Serial ROM error */
-#define VECNUM_GPTDC (32 + 25) /* GPT decrementer pulse */
-#define VECNUM_RSVD0 (32 + 26) /* Reserved */
-#define VECNUM_EPCIPER (32 + 27) /* External PCI PERR */
-#define VECNUM_EIR0 (32 + 28) /* External interrupt 0 */
-#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */
-#define VECNUM_EIR1 (32 + 30) /* External interrupt 1 */
-#define VECNUM_EWU1 (32 + 31) /* Ethernet 1 wakeup */
+/*
+ * Define the number of UIC's
+ */
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UIC_MAX 4
+#elif defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
+#define UIC_MAX 3
+#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#define UIC_MAX 2
+#else
+#define UIC_MAX 1
+#endif
-#define VECNUM_TXDE VECNUM_MTDE
-#define VECNUM_RXDE VECNUM_MRDE
+/*
+ * UIC register
+ */
+#define UIC_SR 0x0 /* UIC status */
+#define UIC_ER 0x2 /* UIC enable */
+#define UIC_CR 0x3 /* UIC critical */
+#define UIC_PR 0x4 /* UIC polarity */
+#define UIC_TR 0x5 /* UIC triggering */
+#define UIC_MSR 0x6 /* UIC masked status */
+#define UIC_VR 0x7 /* UIC vector */
+#define UIC_VCR 0x8 /* UIC vector configuration */
+
+#define UIC0_DCR_BASE 0xc0
+#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */
+#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */
+#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */
+#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
+#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
+#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
+#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */
+#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
+
+#define UIC1_DCR_BASE 0xd0
+#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */
+#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */
+#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */
+#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
+#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
+#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
+#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
+#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
+
+#if defined(CONFIG_440GX)
+#define UIC2_DCR_BASE 0x210
+#else
+#define UIC2_DCR_BASE 0xe0
+#endif
+#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */
+#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */
+#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
+#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */
+#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
+#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
+#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
+#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */
+#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
+
+#define UIC3_DCR_BASE 0xf0
+#define uic3sr (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */
+#define uic3srs (UIC3_DCR_BASE+0x1) /* UIC3 status-Read Set */
+#define uic3er (UIC3_DCR_BASE+0x2) /* UIC3 enable */
+#define uic3cr (UIC3_DCR_BASE+0x3) /* UIC3 critical */
+#define uic3pr (UIC3_DCR_BASE+0x4) /* UIC3 polarity */
+#define uic3tr (UIC3_DCR_BASE+0x5) /* UIC3 triggering */
+#define uic3msr (UIC3_DCR_BASE+0x6) /* UIC3 masked status */
+#define uic3vr (UIC3_DCR_BASE+0x7) /* UIC3 vector */
+#define uic3vcr (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */
+
+#if defined(CONFIG_440GX)
+#define UIC_DCR_BASE 0x200
+#define uicb0sr (UIC_DCR_BASE+0x0) /* UIC Base Status Register */
+#define uicb0er (UIC_DCR_BASE+0x2) /* UIC Base enable */
+#define uicb0cr (UIC_DCR_BASE+0x3) /* UIC Base critical */
+#define uicb0pr (UIC_DCR_BASE+0x4) /* UIC Base polarity */
+#define uicb0tr (UIC_DCR_BASE+0x5) /* UIC Base triggering */
+#define uicb0msr (UIC_DCR_BASE+0x6) /* UIC Base masked status */
+#define uicb0vr (UIC_DCR_BASE+0x7) /* UIC Base vector */
+#define uicb0vcr (UIC_DCR_BASE+0x8) /* UIC Base vector configuration*/
+#endif /* CONFIG_440GX */
+
+/* The following is for compatibility with 405 code */
+#define uicsr uic0sr
+#define uicer uic0er
+#define uiccr uic0cr
+#define uicpr uic0pr
+#define uictr uic0tr
+#define uicmsr uic0msr
+#define uicvr uic0vr
+#define uicvcr uic0vcr
-/* UIC 2 */
-#define VECNUM_EIR5 (64 + 0) /* External interrupt 5 */
-#define VECNUM_EIR6 (64 + 1) /* External interrupt 6 */
-#define VECNUM_OPB (64 + 2) /* OPB to PLB bridge int stat */
-#define VECNUM_EIR2 (64 + 3) /* External interrupt 2 */
-#define VECNUM_EIR3 (64 + 4) /* External interrupt 3 */
-#define VECNUM_DDR2 (64 + 5) /* DDR2 sdram */
-#define VECNUM_MCTX0 (64 + 6) /* MAl intp coalescence TX0 */
-#define VECNUM_MCTX1 (64 + 7) /* MAl intp coalescence TX1 */
-#define VECNUM_MCTR0 (64 + 8) /* MAl intp coalescence TR0 */
-#define VECNUM_MCTR1 (64 + 9) /* MAl intp coalescence TR1 */
+/*
+ * Now the interrupt vector definitions. They are different for most of
+ * the 4xx variants, so we need some more #ifdef's here. No mask
+ * definitions anymore here. For this please use the UIC_MASK macro below.
+ *
+ * Note: Please only define the interrupts really used in U-Boot here.
+ * Those are the cascading and EMAC/MAL related interrupt.
+ */
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#if defined(CONFIG_405EP) || defined(CONFIG_405GP)
+#define VECNUM_MAL_SERR 10
+#define VECNUM_MAL_TXEOB 11
+#define VECNUM_MAL_RXEOB 12
+#define VECNUM_MAL_TXDE 13
+#define VECNUM_MAL_RXDE 14
+#define VECNUM_ETH0 15
+#define VECNUM_ETH1_OFFS 2
+#define VECNUM_EIRQ6 29
+#endif /* defined(CONFIG_405EP) */
+#if defined(CONFIG_405EZ)
+#define VECNUM_USBDEV 15
+#define VECNUM_ETH0 16
+#define VECNUM_MAL_SERR 18
+#define VECNUM_MAL_TXDE 18
+#define VECNUM_MAL_RXDE 18
+#define VECNUM_MAL_TXEOB 19
+#define VECNUM_MAL_RXEOB 21
+#endif /* CONFIG_405EX */
+
+#if defined(CONFIG_405EX)
/* UIC 0 */
-#define VECNUM_U1 1 /* UART1 */
-#define VECNUM_IIC0 2 /* IIC0 */
-#define VECNUM_IIC1 3 /* IIC1 */
-#define VECNUM_PIM 4 /* PCI inbound message */
-#define VECNUM_PCRW 5 /* PCI command reg write */
-#define VECNUM_PPM 6 /* PCI power management */
-#define VECNUM_MSI0 8 /* PCI MSI level 0 */
-#define VECNUM_EIR0 9 /* External interrupt 0 */
-#define VECNUM_UIC2NC 10 /* UIC2 non-critical interrupt */
-#define VECNUM_UIC2C 11 /* UIC2 critical interrupt */
-#define VECNUM_D0 12 /* DMA channel 0 */
-#define VECNUM_D1 13 /* DMA channel 1 */
-#define VECNUM_D2 14 /* DMA channel 2 */
-#define VECNUM_D3 15 /* DMA channel 3 */
-#define VECNUM_UIC3NC 16 /* UIC3 non-critical interrupt */
-#define VECNUM_UIC3C 17 /* UIC3 critical interrupt */
-#define VECNUM_EIR1 9 /* External interrupt 1 */
-#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
-#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+#define VECNUM_MAL_TXEOB 10
+#define VECNUM_MAL_RXEOB 11
+#define VECNUM_ETH0 24
+#define VECNUM_ETH1_OFFS 1
+#define VECNUM_UIC2NCI 28
+#define VECNUM_UIC2CI 29
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
/* UIC 1 */
-#define VECNUM_EIR2 (32 + 0) /* External interrupt 0 */
-#define VECNUM_U0 (32 + 1) /* UART0 */
-#define VECNUM_EIR3 (32 + 20) /* External interrupt 3 */
-#define VECNUM_EIR4 (32 + 21) /* External interrupt 4 */
-#define VECNUM_EIR5 (32 + 26) /* External interrupt 5 */
-#define VECNUM_EIR6 (32 + 27) /* External interrupt 6 */
-#define VECNUM_U2 (32 + 28) /* UART2 */
-#define VECNUM_U3 (32 + 29) /* UART3 */
-#define VECNUM_EIR7 (32 + 30) /* External interrupt 7 */
-#define VECNUM_EIR8 (32 + 31) /* External interrupt 8 */
-
-/* UIC 2 */
-#define VECNUM_EIR9 (64 + 2) /* External interrupt 9 */
-#define VECNUM_MS (64 + 3) /* MAL SERR */
-#define VECNUM_TXDE (64 + 4) /* MAL TXDE */
-#define VECNUM_RXDE (64 + 5) /* MAL RXDE */
-#define VECNUM_MTE (64 + 6) /* MAL TXEOB */
-#define VECNUM_MRE (64 + 7) /* MAL RXEOB */
-#define VECNUM_ETH0 (64 + 16) /* Ethernet 0 */
-#define VECNUM_ETH1 (64 + 17) /* Ethernet 1 */
-#define VECNUM_ETH2 (64 + 18) /* Ethernet 2 */
-#define VECNUM_ETH3 (64 + 19) /* Ethernet 3 */
-#define VECNUM_EWU0 (64 + 20) /* Emac 0 wakeup */
-#define VECNUM_EWU1 (64 + 21) /* Emac 1 wakeup */
-#define VECNUM_EWU2 (64 + 22) /* Emac 2 wakeup */
-#define VECNUM_EWU3 (64 + 23) /* Emac 3 wakeup */
-#define VECNUM_EIR10 (64 + 24) /* External interrupt 10 */
-#define VECNUM_EIR11 (64 + 25) /* External interrupt 11 */
-
-/* UIC 3 */
-#define VECNUM_EIR12 (96 + 20) /* External interrupt 20 */
-#define VECNUM_EIR13 (96 + 21) /* External interrupt 21 */
-#define VECNUM_EIR14 (96 + 22) /* External interrupt 22 */
-#define VECNUM_EIR15 (96 + 23) /* External interrupt 23 */
-#define VECNUM_PCIEMSI0 (96 + 24) /* PCI Express MSI level 0 */
-#define VECNUM_PCIEMSI1 (96 + 25) /* PCI Express MSI level 1 */
-#define VECNUM_PCIEMSI2 (96 + 26) /* PCI Express MSI level 2 */
-#define VECNUM_PCIEMSI3 (96 + 27) /* PCI Express MSI level 3 */
-#define VECNUM_PCIEMSI4 (96 + 28) /* PCI Express MSI level 4 */
-#define VECNUM_PCIEMSI5 (96 + 29) /* PCI Express MSI level 5 */
-#define VECNUM_PCIEMSI6 (96 + 30) /* PCI Express MSI level 6 */
-#define VECNUM_PCIEMSI7 (96 + 31) /* PCI Express MSI level 7 */
-
-#elif defined(CONFIG_440SPE)
+#define VECNUM_MAL_SERR (32 + 0)
+#define VECNUM_MAL_TXDE (32 + 1)
+#define VECNUM_MAL_RXDE (32 + 2)
+#endif /* CONFIG_405EX */
+#if defined(CONFIG_440GP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR)
/* UIC 0 */
-#define VECNUM_U0 0 /* UART0 */
-#define VECNUM_U1 1 /* UART1 */
-#define VECNUM_IIC0 2 /* IIC0 */
-#define VECNUM_IIC1 3 /* IIC1 */
-#define VECNUM_PIM 4 /* PCI inbound message */
-#define VECNUM_PCRW 5 /* PCI command reg write */
-#define VECNUM_PPM 6 /* PCI power management */
-#define VECNUM_MSI0 7 /* PCI MSI level 0 */
-#define VECNUM_MSI1 8 /* PCI MSI level 0 */
-#define VECNUM_MSI2 9 /* PCI MSI level 0 */
-#define VECNUM_UIC2NC 10 /* UIC2 non-critical interrupt */
-#define VECNUM_UIC2C 11 /* UIC2 critical interrupt */
-#define VECNUM_D0 12 /* DMA channel 0 */
-#define VECNUM_D1 13 /* DMA channel 1 */
-#define VECNUM_D2 14 /* DMA channel 2 */
-#define VECNUM_D3 15 /* DMA channel 3 */
-#define VECNUM_UIC3NC 16 /* UIC3 non-critical interrupt */
-#define VECNUM_UIC3C 17 /* UIC3 critical interrupt */
-#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
-#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+#define VECNUM_MAL_TXEOB 10
+#define VECNUM_MAL_RXEOB 11
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
/* UIC 1 */
-#define VECNUM_MS (32 + 1 ) /* MAL SERR */
-#define VECNUM_TXDE (32 + 2 ) /* MAL TXDE */
-#define VECNUM_RXDE (32 + 3 ) /* MAL RXDE */
-#define VECNUM_MTE (32 + 6 ) /* MAL Tx EOB */
-#define VECNUM_MRE (32 + 7 ) /* MAL Rx EOB */
-#define VECNUM_CT0 (32 + 12 ) /* GPT compare timer 0 */
-#define VECNUM_CT1 (32 + 13 ) /* GPT compare timer 1 */
-#define VECNUM_CT2 (32 + 14 ) /* GPT compare timer 2 */
-#define VECNUM_CT3 (32 + 15 ) /* GPT compare timer 3 */
-#define VECNUM_CT4 (32 + 16 ) /* GPT compare timer 4 */
-#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */
-#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */
-
-/* UIC 2 */
-#define VECNUM_EIR5 (64 + 24) /* External interrupt 5 */
-#define VECNUM_EIR4 (64 + 25) /* External interrupt 4 */
-#define VECNUM_EIR3 (64 + 26) /* External interrupt 3 */
-#define VECNUM_EIR2 (64 + 27) /* External interrupt 2 */
-#define VECNUM_EIR1 (64 + 28) /* External interrupt 1 */
-#define VECNUM_EIR0 (64 + 29) /* External interrupt 0 */
-
-#elif defined(CONFIG_440SP)
-
+#define VECNUM_MAL_SERR (32 + 0)
+#define VECNUM_MAL_TXDE (32 + 1)
+#define VECNUM_MAL_RXDE (32 + 2)
+#define VECNUM_USBDEV (32 + 23)
+#define VECNUM_ETH0 (32 + 28)
+#define VECNUM_ETH1_OFFS 2
+#endif /* CONFIG_440GP */
+
+#if defined(CONFIG_440GX)
/* UIC 0 */
-#define VECNUM_U0 0 /* UART0 */
-#define VECNUM_U1 1 /* UART1 */
-#define VECNUM_IIC0 2 /* IIC0 */
-#define VECNUM_IIC1 3 /* IIC1 */
-#define VECNUM_PIM 4 /* PCI inbound message */
-#define VECNUM_PCRW 5 /* PCI command reg write */
-#define VECNUM_PPM 6 /* PCI power management */
-#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
-#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+#define VECNUM_MAL_TXEOB 10
+#define VECNUM_MAL_RXEOB 11
/* UIC 1 */
-#define VECNUM_EIR0 (32 + 0) /* External interrupt 0 */
-#define VECNUM_MS (32 + 1) /* MAL SERR */
-#define VECNUM_TXDE (32 + 2) /* MAL TXDE */
-#define VECNUM_RXDE (32 + 3) /* MAL RXDE */
-#define VECNUM_MTE (32 + 6) /* MAL Tx EOB */
-#define VECNUM_MRE (32 + 7) /* MAL Rx EOB */
-#define VECNUM_CT0 (32 + 12) /* GPT compare timer 0 */
-#define VECNUM_CT1 (32 + 13) /* GPT compare timer 1 */
-#define VECNUM_CT2 (32 + 14) /* GPT compare timer 2 */
-#define VECNUM_CT3 (32 + 15) /* GPT compare timer 3 */
-#define VECNUM_CT4 (32 + 16) /* GPT compare timer 4 */
-#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */
-#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */
-
-#elif defined(CONFIG_440)
+#define VECNUM_MAL_SERR (32 + 0)
+#define VECNUM_MAL_TXDE (32 + 1)
+#define VECNUM_MAL_RXDE (32 + 2)
+#define VECNUM_ETH0 (32 + 28)
+#define VECNUM_ETH1_OFFS 2
+
+/* UICB 0 (440GX only) */
+#define VECNUM_UIC0CI 0
+#define VECNUM_UIC0NCI 1
+#define VECNUM_UIC1CI 2
+#define VECNUM_UIC1NCI 3
+#define VECNUM_UIC2CI 4
+#define VECNUM_UIC2NCI 5
+#endif /* CONFIG_440GX */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* UIC 0 */
-#define VECNUM_U0 0 /* UART0 */
-#define VECNUM_U1 1 /* UART1 */
-#define VECNUM_IIC0 2 /* IIC0 */
-#define VECNUM_IIC1 3 /* IIC1 */
-#define VECNUM_PIM 4 /* PCI inbound message */
-#define VECNUM_PCRW 5 /* PCI command reg write */
-#define VECNUM_PPM 6 /* PCI power management */
-#define VECNUM_MSI0 7 /* PCI MSI level 0 */
-#define VECNUM_MSI1 8 /* PCI MSI level 0 */
-#define VECNUM_MSI2 9 /* PCI MSI level 0 */
-#define VECNUM_MTE 10 /* MAL TXEOB */
-#define VECNUM_MRE 11 /* MAL RXEOB */
-#define VECNUM_D0 12 /* DMA channel 0 */
-#define VECNUM_D1 13 /* DMA channel 1 */
-#define VECNUM_D2 14 /* DMA channel 2 */
-#define VECNUM_D3 15 /* DMA channel 3 */
-#define VECNUM_CT0 18 /* GPT compare timer 0 */
-#define VECNUM_CT1 19 /* GPT compare timer 1 */
-#define VECNUM_CT2 20 /* GPT compare timer 2 */
-#define VECNUM_CT3 21 /* GPT compare timer 3 */
-#define VECNUM_CT4 22 /* GPT compare timer 4 */
-#define VECNUM_EIR0 23 /* External interrupt 0 */
-#define VECNUM_EIR1 24 /* External interrupt 1 */
-#define VECNUM_EIR2 25 /* External interrupt 2 */
-#define VECNUM_EIR3 26 /* External interrupt 3 */
-#define VECNUM_EIR4 27 /* External interrupt 4 */
-#define VECNUM_EIR5 28 /* External interrupt 5 */
-#define VECNUM_EIR6 29 /* External interrupt 6 */
-#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
-#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+#define VECNUM_MAL_TXEOB 10
+#define VECNUM_MAL_RXEOB 11
+#define VECNUM_USBDEV 20
+#define VECNUM_ETH0 24
+#define VECNUM_ETH1_OFFS 1
+#define VECNUM_UIC2NCI 28
+#define VECNUM_UIC2CI 29
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
/* UIC 1 */
-#define VECNUM_MS (32 + 0 ) /* MAL SERR */
-#define VECNUM_TXDE (32 + 1 ) /* MAL TXDE */
-#define VECNUM_RXDE (32 + 2 ) /* MAL RXDE */
-#define VECNUM_USBDEV (32 + 23) /* USB 1.1/USB 2.0 Device */
-#define VECNUM_ETH0 (32 + 28) /* Ethernet 0 interrupt status */
-#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */
-
-#else /* !defined(CONFIG_440) */
-
-#if defined(CONFIG_405EZ)
-#define VECNUM_D0 0 /* DMA channel 0 */
-#define VECNUM_D1 1 /* DMA channel 1 */
-#define VECNUM_D2 2 /* DMA channel 2 */
-#define VECNUM_D3 3 /* DMA channel 3 */
-#define VECNUM_1588 4 /* IEEE 1588 network synchronization */
-#define VECNUM_U0 5 /* UART0 */
-#define VECNUM_U1 6 /* UART1 */
-#define VECNUM_CAN0 7 /* CAN 0 */
-#define VECNUM_CAN1 8 /* CAN 1 */
-#define VECNUM_SPI 9 /* SPI */
-#define VECNUM_IIC0 10 /* I2C */
-#define VECNUM_CHT0 11 /* Chameleon timer high pri interrupt */
-#define VECNUM_CHT1 12 /* Chameleon timer high pri interrupt */
-#define VECNUM_USBH1 13 /* USB Host 1 */
-#define VECNUM_USBH2 14 /* USB Host 2 */
-#define VECNUM_USBDEV 15 /* USB Device */
-#define VECNUM_ETH0 16 /* 10/100 Ethernet interrupt status */
-#define VECNUM_EWU0 17 /* Ethernet wakeup sequence detected */
-
-#define VECNUM_MADMAL 18 /* Logical OR of following MadMAL int */
-#define VECNUM_MS 18 /* MAL_SERR_INT */
-#define VECNUM_TXDE 18 /* MAL_TXDE_INT */
-#define VECNUM_RXDE 18 /* MAL_RXDE_INT */
+#define VECNUM_MAL_SERR (32 + 0)
+#define VECNUM_MAL_TXDE (32 + 1)
+#define VECNUM_MAL_RXDE (32 + 2)
-#define VECNUM_MTE 19 /* MAL TXEOB */
-#define VECNUM_MTE1 20 /* MAL TXEOB1 */
-#define VECNUM_MRE 21 /* MAL RXEOB */
-#define VECNUM_NAND 22 /* NAND Flash controller */
-#define VECNUM_ADC 23 /* ADC */
-#define VECNUM_DAC 24 /* DAC */
-#define VECNUM_OPB2PLB 25 /* OPB to PLB bridge interrupt */
-#define VECNUM_RESERVED0 26 /* Reserved */
-#define VECNUM_EIR0 27 /* External interrupt 0 */
-#define VECNUM_EIR1 28 /* External interrupt 1 */
-#define VECNUM_EIR2 29 /* External interrupt 2 */
-#define VECNUM_EIR3 30 /* External interrupt 3 */
-#define VECNUM_EIR4 31 /* External interrupt 4 */
+/* UIC 2 */
+#define VECNUM_EIRQ2 (64 + 3)
+#endif /* CONFIG_440EPX */
-#elif defined(CONFIG_405EX)
+#if defined(CONFIG_440SP)
+/* UIC 0 */
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
+/* UIC 1 */
+#define VECNUM_MAL_SERR (32 + 1)
+#define VECNUM_MAL_TXDE (32 + 2)
+#define VECNUM_MAL_RXDE (32 + 3)
+#define VECNUM_MAL_TXEOB (32 + 6)
+#define VECNUM_MAL_RXEOB (32 + 7)
+#define VECNUM_ETH0 (32 + 28)
+#endif /* CONFIG_440SP */
+
+#if defined(CONFIG_440SPE)
/* UIC 0 */
-#define VECNUM_U0 00
-#define VECNUM_U1 01
-#define VECNUM_IIC0 02
-#define VECNUM_PKA 03
-#define VECNUM_TRNG 04
-#define VECNUM_EBM 05
-#define VECNUM_BGI 06
-#define VECNUM_IIC1 07
-#define VECNUM_SPI 08
-#define VECNUM_EIR0 09
-#define VECNUM_MTE 10 /* MAL Tx EOB */
-#define VECNUM_MRE 11 /* MAL Rx EOB */
-#define VECNUM_DMA0 12
-#define VECNUM_DMA1 13
-#define VECNUM_DMA2 14
-#define VECNUM_DMA3 15
-#define VECNUM_PCIE0AL 16
-#define VECNUM_PCIE0VPD 17
-#define VECNUM_RPCIE0HRST 18
-#define VECNUM_FPCIE0HRST 19
-#define VECNUM_PCIE0TCR 20
-#define VECNUM_PCIEMSI0 21
-#define VECNUM_PCIEMSI1 22
-#define VECNUM_SECURITY 23
-#define VECNUM_ETH0 24
-#define VECNUM_ETH1 25
-#define VECNUM_PCIEMSI2 26
-#define VECNUM_EIR4 27
-#define VECNUM_UIC2NC 28
-#define VECNUM_UIC2C 29
-#define VECNUM_UIC1NC 30
-#define VECNUM_UIC1C 31
+#define VECNUM_UIC2NCI 10
+#define VECNUM_UIC2CI 11
+#define VECNUM_UIC3NCI 16
+#define VECNUM_UIC3CI 17
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
/* UIC 1 */
-#define VECNUM_MS (32 + 00) /* MAL SERR */
-#define VECNUM_TXDE (32 + 01) /* MAL TXDE */
-#define VECNUM_RXDE (32 + 02) /* MAL RXDE */
-#define VECNUM_PCIE0BMVC0 (32 + 03)
-#define VECNUM_PCIE0DCRERR (32 + 04)
-#define VECNUM_EBC (32 + 05)
-#define VECNUM_NDFC (32 + 06)
-#define VECNUM_PCEI1DCRERR (32 + 07)
-#define VECNUM_CT8 (32 + 08)
-#define VECNUM_CT9 (32 + 09)
-#define VECNUM_PCIE1AL (32 + 10)
-#define VECNUM_PCIE1VPD (32 + 11)
-#define VECNUM_RPCE1HRST (32 + 12)
-#define VECNUM_FPCE1HRST (32 + 13)
-#define VECNUM_PCIE1TCR (32 + 14)
-#define VECNUM_PCIE1VC0 (32 + 15)
-#define VECNUM_CT3 (32 + 16)
-#define VECNUM_CT4 (32 + 17)
-#define VECNUM_EIR7 (32 + 18)
-#define VECNUM_EIR8 (32 + 19)
-#define VECNUM_EIR9 (32 + 20)
-#define VECNUM_CT5 (32 + 21)
-#define VECNUM_CT6 (32 + 22)
-#define VECNUM_CT7 (32 + 23)
-#define VECNUM_SROM (32 + 24) /* SERIAL ROM */
-#define VECNUM_GPTDECPULS (32 + 25) /* GPT Decrement pulse */
-#define VECNUM_EIR2 (32 + 26)
-#define VECNUM_EIR5 (32 + 27)
-#define VECNUM_EIR6 (32 + 28)
-#define VECNUM_EMAC0WAKE (32 + 29)
-#define VECNUM_EIR1 (32 + 30)
-#define VECNUM_EMAC1WAKE (32 + 31)
+#define VECNUM_MAL_SERR (32 + 1)
+#define VECNUM_MAL_TXDE (32 + 2)
+#define VECNUM_MAL_RXDE (32 + 3)
+#define VECNUM_MAL_TXEOB (32 + 6)
+#define VECNUM_MAL_RXEOB (32 + 7)
+#define VECNUM_ETH0 (32 + 28)
+#endif /* CONFIG_440SPE */
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+/* UIC 0 */
+#define VECNUM_UIC2NCI 10
+#define VECNUM_UIC2CI 11
+#define VECNUM_UIC3NCI 16
+#define VECNUM_UIC3CI 17
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
/* UIC 2 */
-#define VECNUM_PCIE0INTA (64 + 00) /* PCIE0 INTA */
-#define VECNUM_PCIE0INTB (64 + 01) /* PCIE0 INTB */
-#define VECNUM_PCIE0INTC (64 + 02) /* PCIE0 INTC */
-#define VECNUM_PCIE0INTD (64 + 03) /* PCIE0 INTD */
-#define VECNUM_EIR3 (64 + 04) /* External IRQ 3 */
-#define VECNUM_DDRMCUE (64 + 05)
-#define VECNUM_DDRMCCE (64 + 06)
-#define VECNUM_MALINTCOATX0 (64 + 07) /* Interrupt coalecence TX0 */
-#define VECNUM_MALINTCOATX1 (64 + 08) /* Interrupt coalecence TX1 */
-#define VECNUM_MALINTCOARX0 (64 + 09) /* Interrupt coalecence RX0 */
-#define VECNUM_MALINTCOARX1 (64 + 10) /* Interrupt coalecence RX1 */
-#define VECNUM_PCIE1INTA (64 + 11) /* PCIE0 INTA */
-#define VECNUM_PCIE1INTB (64 + 12) /* PCIE0 INTB */
-#define VECNUM_PCIE1INTC (64 + 13) /* PCIE0 INTC */
-#define VECNUM_PCIE1INTD (64 + 14) /* PCIE0 INTD */
-#define VECNUM_RPCIEMSI2 (64 + 15) /* MSI level 2 */
-#define VECNUM_PCIEMSI3 (64 + 16) /* MSI level 2 */
-#define VECNUM_PCIEMSI4 (64 + 17) /* MSI level 2 */
-#define VECNUM_PCIEMSI5 (64 + 18) /* MSI level 2 */
-#define VECNUM_PCIEMSI6 (64 + 19) /* MSI level 2 */
-#define VECNUM_PCIEMSI7 (64 + 20) /* MSI level 2 */
-#define VECNUM_PCIEMSI8 (64 + 21) /* MSI level 2 */
-#define VECNUM_PCIEMSI9 (64 + 22) /* MSI level 2 */
-#define VECNUM_PCIEMSI10 (64 + 23) /* MSI level 2 */
-#define VECNUM_PCIEMSI11 (64 + 24) /* MSI level 2 */
-#define VECNUM_PCIEMSI12 (64 + 25) /* MSI level 2 */
-#define VECNUM_PCIEMSI13 (64 + 26) /* MSI level 2 */
-#define VECNUM_PCIEMSI14 (64 + 27) /* MSI level 2 */
-#define VECNUM_PCIEMSI15 (64 + 28) /* MSI level 2 */
-#define VECNUM_PLB4XAHB (64 + 29) /* PLBxAHB bridge */
-#define VECNUM_USBWAKE (64 + 30) /* USB wakup */
-#define VECNUM_USBOTG (64 + 31) /* USB OTG */
+#define VECNUM_MAL_SERR (64 + 3)
+#define VECNUM_MAL_TXDE (64 + 4)
+#define VECNUM_MAL_RXDE (64 + 5)
+#define VECNUM_MAL_TXEOB (64 + 6)
+#define VECNUM_MAL_RXEOB (64 + 7)
+#define VECNUM_ETH0 (64 + 16)
+#define VECNUM_ETH1_OFFS 1
+#endif /* CONFIG_460EX */
+
+#if !defined(VECNUM_ETH1_OFFS)
+#define VECNUM_ETH1_OFFS 1
+#endif
-#else /* !CONFIG_405EZ */
-
-#define VECNUM_U0 0 /* UART0 */
-#define VECNUM_U1 1 /* UART1 */
-#define VECNUM_D0 5 /* DMA channel 0 */
-#define VECNUM_D1 6 /* DMA channel 1 */
-#define VECNUM_D2 7 /* DMA channel 2 */
-#define VECNUM_D3 8 /* DMA channel 3 */
-#define VECNUM_EWU0 9 /* Ethernet wakeup */
-#define VECNUM_MS 10 /* MAL SERR */
-#define VECNUM_MTE 11 /* MAL TXEOB */
-#define VECNUM_MRE 12 /* MAL RXEOB */
-#define VECNUM_TXDE 13 /* MAL TXDE */
-#define VECNUM_RXDE 14 /* MAL RXDE */
-#define VECNUM_ETH0 15 /* Ethernet interrupt status */
-#define VECNUM_EIR0 25 /* External interrupt 0 */
-#define VECNUM_EIR1 26 /* External interrupt 1 */
-#define VECNUM_EIR2 27 /* External interrupt 2 */
-#define VECNUM_EIR3 28 /* External interrupt 3 */
-#define VECNUM_EIR4 29 /* External interrupt 4 */
-#define VECNUM_EIR5 30 /* External interrupt 5 */
-#define VECNUM_EIR6 31 /* External interrupt 6 */
-#endif /* defined(CONFIG_405EZ) */
-
-#endif /* defined(CONFIG_440) */
+/*
+ * Mask definitions (used for example in 4xx_enet.c)
+ */
+#define UIC_MASK(vec) (0x80000000 >> ((vec) & 0x1f))
+#define UIC_NR(vec) ((vec) >> 5)
#endif /* _PPC4xx_UIC_H_ */
/*
* define UIC_EXT0 ... UIC_EXT6 if external interrupt is active high
*/
-#define CFG_UIC0_POLARITY (0xFFFFFF80 | UIC_EXT6)
+#define CFG_UIC0_POLARITY (0xFFFFFF80 | UIC_MASK(VECNUM_EIRQ6))
/*-----------------------------------------------------------------------
* FPGA stuff
#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
#define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */
-/******************************************************************************
- * Universal interrupt controller
- ******************************************************************************/
-#define UIC_SR 0x0 /* UIC status */
-#define UIC_ER 0x2 /* UIC enable */
-#define UIC_CR 0x3 /* UIC critical */
-#define UIC_PR 0x4 /* UIC polarity */
-#define UIC_TR 0x5 /* UIC triggering */
-#define UIC_MSR 0x6 /* UIC masked status */
-#define UIC_VR 0x7 /* UIC vector */
-#define UIC_VCR 0x8 /* UIC vector configuration */
-
-#define UIC_DCR_BASE 0xc0
-#define UIC0_DCR_BASE UIC_DCR_BASE
-#define uicsr (UIC_DCR_BASE+0x0) /* UIC status */
-#define uicsrs (UIC_DCR_BASE+0x1) /* UIC status set */
-#define uicer (UIC_DCR_BASE+0x2) /* UIC enable */
-#define uiccr (UIC_DCR_BASE+0x3) /* UIC critical */
-#define uicpr (UIC_DCR_BASE+0x4) /* UIC polarity */
-#define uictr (UIC_DCR_BASE+0x5) /* UIC triggering */
-#define uicmsr (UIC_DCR_BASE+0x6) /* UIC masked status */
-#define uicvr (UIC_DCR_BASE+0x7) /* UIC vector */
-#define uicvcr (UIC_DCR_BASE+0x8) /* UIC vector configuration */
-
-#if defined(CONFIG_405EX)
-#define uic0sr uicsr /* UIC status */
-#define uic0srs uicsrs /* UIC status set */
-#define uic0er uicer /* UIC enable */
-#define uic0cr uiccr /* UIC critical */
-#define uic0pr uicpr /* UIC polarity */
-#define uic0tr uictr /* UIC triggering */
-#define uic0msr uicmsr /* UIC masked status */
-#define uic0vr uicvr /* UIC vector */
-#define uic0vcr uicvcr /* UIC vector configuration*/
-
-#define UIC_DCR_BASE1 0xd0
-#define UIC1_DCR_BASE 0xd0
-#define uic1sr (UIC_DCR_BASE1+0x0) /* UIC status */
-#define uic1srs (UIC_DCR_BASE1+0x1) /* UIC status set */
-#define uic1er (UIC_DCR_BASE1+0x2) /* UIC enable */
-#define uic1cr (UIC_DCR_BASE1+0x3) /* UIC critical */
-#define uic1pr (UIC_DCR_BASE1+0x4) /* UIC polarity */
-#define uic1tr (UIC_DCR_BASE1+0x5) /* UIC triggering */
-#define uic1msr (UIC_DCR_BASE1+0x6) /* UIC masked status */
-#define uic1vr (UIC_DCR_BASE1+0x7) /* UIC vector */
-#define uic1vcr (UIC_DCR_BASE1+0x8) /* UIC vector configuration*/
-
-#define UIC_DCR_BASE2 0xe0
-#define UIC2_DCR_BASE 0xe0
-#define uic2sr (UIC_DCR_BASE2+0x0) /* UIC status */
-#define uic2srs (UIC_DCR_BASE2+0x1) /* UIC status set */
-#define uic2er (UIC_DCR_BASE2+0x2) /* UIC enable */
-#define uic2cr (UIC_DCR_BASE2+0x3) /* UIC critical */
-#define uic2pr (UIC_DCR_BASE2+0x4) /* UIC polarity */
-#define uic2tr (UIC_DCR_BASE2+0x5) /* UIC triggering */
-#define uic2msr (UIC_DCR_BASE2+0x6) /* UIC masked status */
-#define uic2vr (UIC_DCR_BASE2+0x7) /* UIC vector */
-#define uic2vcr (UIC_DCR_BASE2+0x8) /* UIC vector configuration*/
-#endif
-
-/*-----------------------------------------------------------------------------+
-| Universal interrupt controller interrupts
-+-----------------------------------------------------------------------------*/
-#if defined(CONFIG_405EZ)
-#define UIC_DMA0 0x80000000 /* DMA chan. 0 */
-#define UIC_DMA1 0x40000000 /* DMA chan. 1 */
-#define UIC_DMA2 0x20000000 /* DMA chan. 2 */
-#define UIC_DMA3 0x10000000 /* DMA chan. 3 */
-#define UIC_1588 0x08000000 /* IEEE 1588 network synchronization */
-#define UIC_UART0 0x04000000 /* UART 0 */
-#define UIC_UART1 0x02000000 /* UART 1 */
-#define UIC_CAN0 0x01000000 /* CAN 0 */
-#define UIC_CAN1 0x00800000 /* CAN 1 */
-#define UIC_SPI 0x00400000 /* SPI */
-#define UIC_IIC 0x00200000 /* IIC */
-#define UIC_CHT0 0x00100000 /* Chameleon timer high pri interrupt */
-#define UIC_CHT1 0x00080000 /* Chameleon timer high pri interrupt */
-#define UIC_USBH1 0x00040000 /* USB Host 1 */
-#define UIC_USBH2 0x00020000 /* USB Host 2 */
-#define UIC_USBDEV 0x00010000 /* USB Device */
-#define UIC_ENET 0x00008000 /* Ethernet interrupt status */
-#define UIC_ENET1 0x00008000 /* dummy define */
-#define UIC_EMAC_WAKE 0x00004000 /* EMAC wake up */
-
-#define UIC_MADMAL 0x00002000 /* Logical OR of following MadMAL int */
-#define UIC_MAL_SERR 0x00002000 /* MAL SERR */
-#define UIC_MAL_TXDE 0x00002000 /* MAL TXDE */
-#define UIC_MAL_RXDE 0x00002000 /* MAL RXDE */
-
-#define UIC_MAL_TXEOB 0x00001000 /* MAL TXEOB */
-#define UIC_MAL_TXEOB1 0x00000800 /* MAL TXEOB1 */
-#define UIC_MAL_RXEOB 0x00000400 /* MAL RXEOB */
-#define UIC_NAND 0x00000200 /* NAND Flash controller */
-#define UIC_ADC 0x00000100 /* ADC */
-#define UIC_DAC 0x00000080 /* DAC */
-#define UIC_OPB2PLB 0x00000040 /* OPB to PLB bridge interrupt */
-#define UIC_RESERVED0 0x00000020 /* Reserved */
-#define UIC_EXT0 0x00000010 /* External interrupt 0 */
-#define UIC_EXT1 0x00000008 /* External interrupt 1 */
-#define UIC_EXT2 0x00000004 /* External interrupt 2 */
-#define UIC_EXT3 0x00000002 /* External interrupt 3 */
-#define UIC_EXT4 0x00000001 /* External interrupt 4 */
-
-#elif defined(CONFIG_405EX)
-
-/* UIC 0 */
-#define UIC_U0 0x80000000 /* */
-#define UIC_U1 0x40000000 /* */
-#define UIC_IIC0 0x20000000 /* */
-#define UIC_PKA 0x10000000 /* */
-#define UIC_TRNG 0x08000000 /* */
-#define UIC_EBM 0x04000000 /* */
-#define UIC_BGI 0x02000000 /* */
-#define UIC_IIC1 0x01000000 /* */
-#define UIC_SPI 0x00800000 /* */
-#define UIC_EIRQ0 0x00400000 /**/
-#define UIC_MTE 0x00200000 /*MAL Tx EOB */
-#define UIC_MRE 0x00100000 /*MAL Rx EOB */
-#define UIC_DMA0 0x00080000 /* */
-#define UIC_DMA1 0x00040000 /* */
-#define UIC_DMA2 0x00020000 /* */
-#define UIC_DMA3 0x00010000 /* */
-#define UIC_PCIE0AL 0x00008000 /* */
-#define UIC_PCIE0VPD 0x00004000 /* */
-#define UIC_RPCIE0HRST 0x00002000 /* */
-#define UIC_FPCIE0HRST 0x00001000 /* */
-#define UIC_PCIE0TCR 0x00000800 /* */
-#define UIC_PCIEMSI0 0x00000400 /* */
-#define UIC_PCIEMSI1 0x00000200 /* */
-#define UIC_SECURITY 0x00000100 /* */
-#define UIC_ENET 0x00000080 /* */
-#define UIC_ENET1 0x00000040 /* */
-#define UIC_PCIEMSI2 0x00000020 /* */
-#define UIC_EIRQ4 0x00000010 /**/
-#define UICB0_UIC2NCI 0x00000008 /* */
-#define UICB0_UIC2CI 0x00000004 /* */
-#define UICB0_UIC1NCI 0x00000002 /* */
-#define UICB0_UIC1CI 0x00000001 /* */
-
-#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
- UICB0_UIC1CI | UICB0_UIC2NCI)
-
-#define UIC_MAL_TXEOB UIC_MTE/* MAL TXEOB */
-#define UIC_MAL_RXEOB UIC_MRE/* MAL RXEOB */
-/* UIC 1 */
-#define UIC_MS 0x80000000 /* MAL SERR */
-#define UIC_MTDE 0x40000000 /* MAL TXDE */
-#define UIC_MRDE 0x20000000 /* MAL RXDE */
-#define UIC_PCIE0BMVC0 0x10000000 /* */
-#define UIC_PCIE0DCRERR 0x08000000 /* */
-#define UIC_EBC 0x04000000 /* */
-#define UIC_NDFC 0x02000000 /* */
-#define UIC_PCEI1DCRERR 0x01000000 /* */
-#define UIC_GPTCMPT8 0x00800000 /* */
-#define UIC_GPTCMPT9 0x00400000 /* */
-#define UIC_PCIE1AL 0x00200000 /* */
-#define UIC_PCIE1VPD 0x00100000 /* */
-#define UIC_RPCE1HRST 0x00080000 /* */
-#define UIC_FPCE1HRST 0x00040000 /* */
-#define UIC_PCIE1TCR 0x00020000 /* */
-#define UIC_PCIE1VC0 0x00010000 /* */
-#define UIC_GPTCMPT3 0x00008000 /* */
-#define UIC_GPTCMPT4 0x00004000 /* */
-#define UIC_EIRQ7 0x00002000 /* */
-#define UIC_EIRQ8 0x00001000 /* */
-#define UIC_EIRQ9 0x00000800 /* */
-#define UIC_GPTCMP5 0x00000400 /* */
-#define UIC_GPTCMP6 0x00000200 /* */
-#define UIC_GPTCMP7 0x00000100 /* */
-#define UIC_SROM 0x00000080 /* SERIAL ROM*/
-#define UIC_GPTDECPULS 0x00000040 /* GPT Decrement pulse*/
-#define UIC_EIRQ2 0x00000020 /* */
-#define UIC_EIRQ5 0x00000010 /* */
-#define UIC_EIRQ6 0x00000008 /* */
-#define UIC_EMAC0WAKE 0x00000004 /* */
-#define UIC_EIRQ1 0x00000002 /* */
-#define UIC_EMAC1WAKE 0x00000001 /* */
-#define UIC_MAL_SERR UIC_MS /* MAL SERR */
-#define UIC_MAL_TXDE UIC_MTDE /* MAL TXDE */
-#define UIC_MAL_RXDE UIC_MRDE /* MAL RXDE */
-/* UIC 2 */
-#define UIC_PCIE0INTA 0x80000000 /* PCIE0 INTA*/
-#define UIC_PCIE0INTB 0x40000000 /* PCIE0 INTB*/
-#define UIC_PCIE0INTC 0x20000000 /* PCIE0 INTC*/
-#define UIC_PCIE0INTD 0x10000000 /* PCIE0 INTD*/
-#define UIC_EIRQ3 0x08000000 /* External IRQ 3*/
-#define UIC_DDRMCUE 0x04000000 /* */
-#define UIC_DDRMCCE 0x02000000 /* */
-#define UIC_MALINTCOATX0 0x01000000 /* Interrupt coalecence TX0*/
-#define UIC_MALINTCOATX1 0x00800000 /* Interrupt coalecence TX1*/
-#define UIC_MALINTCOARX0 0x00400000 /* Interrupt coalecence RX0*/
-#define UIC_MALINTCOARX1 0x00200000 /* Interrupt coalecence RX1*/
-#define UIC_PCIE1INTA 0x00100000 /* PCIE0 INTA*/
-#define UIC_PCIE1INTB 0x00080000 /* PCIE0 INTB*/
-#define UIC_PCIE1INTC 0x00040000 /* PCIE0 INTC*/
-#define UIC_PCIE1INTD 0x00020000 /* PCIE0 INTD*/
-#define UIC_RPCIEMSI2 0x00010000 /* MSI level 2 Note this looks same as uic0-26*/
-#define UIC_PCIEMSI3 0x00008000 /* MSI level 2*/
-#define UIC_PCIEMSI4 0x00004000 /* MSI level 2*/
-#define UIC_PCIEMSI5 0x00002000 /* MSI level 2*/
-#define UIC_PCIEMSI6 0x00001000 /* MSI level 2*/
-#define UIC_PCIEMSI7 0x00000800 /* MSI level 2*/
-#define UIC_PCIEMSI8 0x00000400 /* MSI level 2*/
-#define UIC_PCIEMSI9 0x00000200 /* MSI level 2*/
-#define UIC_PCIEMSI10 0x00000100 /* MSI level 2*/
-#define UIC_PCIEMSI11 0x00000080 /* MSI level 2*/
-#define UIC_PCIEMSI12 0x00000040 /* MSI level 2*/
-#define UIC_PCIEMSI13 0x00000020 /* MSI level 2*/
-#define UIC_PCIEMSI14 0x00000010 /* MSI level 2*/
-#define UIC_PCIEMSI15 0x00000008 /* MSI level 2*/
-#define UIC_PLB4XAHB 0x00000004 /* PLBxAHB bridge*/
-#define UIC_USBWAKE 0x00000002 /* USB wakup*/
-#define UIC_USBOTG 0x00000001 /* USB OTG*/
-#define UIC_ETH0 UIC_ENET
-#define UIC_ETH1 UIC_ENET1
-
-#else /* !defined(CONFIG_405EZ) */
-
-#define UIC_UART0 0x80000000 /* UART 0 */
-#define UIC_UART1 0x40000000 /* UART 1 */
-#define UIC_IIC 0x20000000 /* IIC */
-#define UIC_EXT_MAST 0x10000000 /* External Master */
-#define UIC_PCI 0x08000000 /* PCI write to command reg */
-#define UIC_DMA0 0x04000000 /* DMA chan. 0 */
-#define UIC_DMA1 0x02000000 /* DMA chan. 1 */
-#define UIC_DMA2 0x01000000 /* DMA chan. 2 */
-#define UIC_DMA3 0x00800000 /* DMA chan. 3 */
-#define UIC_EMAC_WAKE 0x00400000 /* EMAC wake up */
-#define UIC_MAL_SERR 0x00200000 /* MAL SERR */
-#define UIC_MAL_TXEOB 0x00100000 /* MAL TXEOB */
-#define UIC_MAL_RXEOB 0x00080000 /* MAL RXEOB */
-#define UIC_MAL_TXDE 0x00040000 /* MAL TXDE */
-#define UIC_MAL_RXDE 0x00020000 /* MAL RXDE */
-#define UIC_ENET 0x00010000 /* Ethernet0 */
-#define UIC_ENET1 0x00004000 /* Ethernet1 on 405EP */
-#define UIC_ECC_CE 0x00004000 /* ECC Correctable Error on 405GP */
-#define UIC_EXT_PCI_SERR 0x00008000 /* External PCI SERR# */
-#define UIC_PCI_PM 0x00002000 /* PCI Power Management */
-#define UIC_EXT0 0x00000040 /* External interrupt 0 */
-#define UIC_EXT1 0x00000020 /* External interrupt 1 */
-#define UIC_EXT2 0x00000010 /* External interrupt 2 */
-#define UIC_EXT3 0x00000008 /* External interrupt 3 */
-#define UIC_EXT4 0x00000004 /* External interrupt 4 */
-#define UIC_EXT5 0x00000002 /* External interrupt 5 */
-#define UIC_EXT6 0x00000001 /* External interrupt 6 */
-#endif /* defined(CONFIG_405EZ) */
-
#ifndef CONFIG_405EP
/******************************************************************************
* Decompression Controller
#define cntrl0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */
#define cntrl1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */
-/*-----------------------------------------------------------------------------
- | Universal interrupt controller
- +----------------------------------------------------------------------------*/
-#define UIC_SR 0x0 /* UIC status */
-#define UIC_ER 0x2 /* UIC enable */
-#define UIC_CR 0x3 /* UIC critical */
-#define UIC_PR 0x4 /* UIC polarity */
-#define UIC_TR 0x5 /* UIC triggering */
-#define UIC_MSR 0x6 /* UIC masked status */
-#define UIC_VR 0x7 /* UIC vector */
-#define UIC_VCR 0x8 /* UIC vector configuration */
-
-#define UIC0_DCR_BASE 0xc0
-#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */
-#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */
-#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */
-#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
-#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
-#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
-#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */
-#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
-
-#define UIC1_DCR_BASE 0xd0
-#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */
-#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */
-#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */
-#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
-#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
-#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
-#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
-#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
-
-#if defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-#define UIC2_DCR_BASE 0xe0
-#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */
-#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */
-#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
-#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */
-#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
-#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
-#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
-#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */
-#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
-
-#define UIC3_DCR_BASE 0xf0
-#define uic3sr (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */
-#define uic3srs (UIC3_DCR_BASE+0x1) /* UIC3 status-Read Set */
-#define uic3er (UIC3_DCR_BASE+0x2) /* UIC3 enable */
-#define uic3cr (UIC3_DCR_BASE+0x3) /* UIC3 critical */
-#define uic3pr (UIC3_DCR_BASE+0x4) /* UIC3 polarity */
-#define uic3tr (UIC3_DCR_BASE+0x5) /* UIC3 triggering */
-#define uic3msr (UIC3_DCR_BASE+0x6) /* UIC3 masked status */
-#define uic3vr (UIC3_DCR_BASE+0x7) /* UIC3 vector */
-#define uic3vcr (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_440GX)
-#define UIC2_DCR_BASE 0x210
-#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status */
-#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
-#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */
-#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
-#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
-#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
-#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */
-#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
-
-
-#define UIC_DCR_BASE 0x200
-#define uicb0sr (UIC_DCR_BASE+0x0) /* UIC Base Status Register */
-#define uicb0er (UIC_DCR_BASE+0x2) /* UIC Base enable */
-#define uicb0cr (UIC_DCR_BASE+0x3) /* UIC Base critical */
-#define uicb0pr (UIC_DCR_BASE+0x4) /* UIC Base polarity */
-#define uicb0tr (UIC_DCR_BASE+0x5) /* UIC Base triggering */
-#define uicb0msr (UIC_DCR_BASE+0x6) /* UIC Base masked status */
-#define uicb0vr (UIC_DCR_BASE+0x7) /* UIC Base vector */
-#define uicb0vcr (UIC_DCR_BASE+0x8) /* UIC Base vector configuration */
-#endif /* CONFIG_440GX */
-
-/* The following is for compatibility with 405 code */
-#define uicsr uic0sr
-#define uicer uic0er
-#define uiccr uic0cr
-#define uicpr uic0pr
-#define uictr uic0tr
-#define uicmsr uic0msr
-#define uicvr uic0vr
-#define uicvcr uic0vcr
-
#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX)
/*----------------------------------------------------------------------------+
| Clock / Power-on-reset DCR's.
#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */
#endif /* CONFIG_440GX */
-
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller 0 interrupts (UIC0)
-+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440SP)
-#define UIC_U0 0x80000000 /* UART 0 */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_IIC1 0x10000000 /* IIC */
-#define UIC_PIM 0x08000000 /* PCI0 inbound message */
-#define UIC_PCRW 0x04000000 /* PCI0 command write register */
-#define UIC_PPM 0x02000000 /* PCI0 power management */
-#define UIC_PVPD 0x01000000 /* PCI0 VPD Access */
-#define UIC_MSI0 0x00800000 /* PCI0 MSI level 0 */
-#define UIC_P1IM 0x00400000 /* PCI1 Inbound Message */
-#define UIC_P1CRW 0x00200000 /* PCI1 command write register */
-#define UIC_P1PM 0x00100000 /* PCI1 power management */
-#define UIC_P1VPD 0x00080000 /* PCI1 VPD Access */
-#define UIC_P1MSI0 0x00040000 /* PCI1 MSI level 0 */
-#define UIC_P2IM 0x00020000 /* PCI2 inbound message */
-#define UIC_P2CRW 0x00010000 /* PCI2 command register write */
-#define UIC_P2PM 0x00008000 /* PCI2 power management */
-#define UIC_P2VPD 0x00004000 /* PCI2 VPD access */
-#define UIC_P2MSI0 0x00002000 /* PCI2 MSI level 0 */
-#define UIC_D0CPF 0x00001000 /* DMA0 command pointer */
-#define UIC_D0CSF 0x00000800 /* DMA0 command status */
-#define UIC_D1CPF 0x00000400 /* DMA1 command pointer */
-#define UIC_D1CSF 0x00000200 /* DMA1 command status */
-#define UIC_I2OID 0x00000100 /* I2O inbound doorbell */
-#define UIC_I2OPLF 0x00000080 /* I2O inbound post list */
-#define UIC_I2O0LL 0x00000040 /* I2O0 low latency PLB write */
-#define UIC_I2O1LL 0x00000020 /* I2O1 low latency PLB write */
-#define UIC_I2O0HB 0x00000010 /* I2O0 high bandwidth PLB write */
-#define UIC_I2O1HB 0x00000008 /* I2O1 high bandwidth PLB write */
-#define UIC_GPTCT 0x00000004 /* GPT count timer */
-#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
-#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
-#elif defined(CONFIG_440GX) || defined(CONFIG_440EP)
-#define UIC_U0 0x80000000 /* UART 0 */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_IIC1 0x10000000 /* IIC */
-#define UIC_PIM 0x08000000 /* PCI inbound message */
-#define UIC_PCRW 0x04000000 /* PCI command register write */
-#define UIC_PPM 0x02000000 /* PCI power management */
-#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */
-#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
-#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
-#define UIC_MTE 0x00200000 /* MAL TXEOB */
-#define UIC_MRE 0x00100000 /* MAL RXEOB */
-#define UIC_D0 0x00080000 /* DMA channel 0 */
-#define UIC_D1 0x00040000 /* DMA channel 1 */
-#define UIC_D2 0x00020000 /* DMA channel 2 */
-#define UIC_D3 0x00010000 /* DMA channel 3 */
-#define UIC_RSVD0 0x00008000 /* Reserved */
-#define UIC_RSVD1 0x00004000 /* Reserved */
-#define UIC_CT0 0x00002000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00001000 /* GPT compare timer 1 */
-#define UIC_CT2 0x00000800 /* GPT compare timer 2 */
-#define UIC_CT3 0x00000400 /* GPT compare timer 3 */
-#define UIC_CT4 0x00000200 /* GPT compare timer 4 */
-#define UIC_EIR0 0x00000100 /* External interrupt 0 */
-#define UIC_EIR1 0x00000080 /* External interrupt 1 */
-#define UIC_EIR2 0x00000040 /* External interrupt 2 */
-#define UIC_EIR3 0x00000020 /* External interrupt 3 */
-#define UIC_EIR4 0x00000010 /* External interrupt 4 */
-#define UIC_EIR5 0x00000008 /* External interrupt 5 */
-#define UIC_EIR6 0x00000004 /* External interrupt 6 */
-#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
-#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
-
-#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-#define UIC_U0 0x80000000 /* UART 0 */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_KRD 0x10000000 /* Kasumi Ready for data */
-#define UIC_KDA 0x08000000 /* Kasumi Data Available */
-#define UIC_PCRW 0x04000000 /* PCI command register write */
-#define UIC_PPM 0x02000000 /* PCI power management */
-#define UIC_IIC1 0x01000000 /* IIC */
-#define UIC_SPI 0x00800000 /* SPI */
-#define UIC_EPCISER 0x00400000 /* External PCI SERR */
-#define UIC_MTE 0x00200000 /* MAL TXEOB */
-#define UIC_MRE 0x00100000 /* MAL RXEOB */
-#define UIC_D0 0x00080000 /* DMA channel 0 */
-#define UIC_D1 0x00040000 /* DMA channel 1 */
-#define UIC_D2 0x00020000 /* DMA channel 2 */
-#define UIC_D3 0x00010000 /* DMA channel 3 */
-#define UIC_UD0 0x00008000 /* UDMA irq 0 */
-#define UIC_UD1 0x00004000 /* UDMA irq 1 */
-#define UIC_UD2 0x00002000 /* UDMA irq 2 */
-#define UIC_UD3 0x00001000 /* UDMA irq 3 */
-#define UIC_HSB2D 0x00000800 /* USB2.0 Device */
-#define UIC_OHCI1 0x00000400 /* USB2.0 Host OHCI irq 1 */
-#define UIC_OHCI2 0x00000200 /* USB2.0 Host OHCI irq 2 */
-#define UIC_EIP94 0x00000100 /* Security EIP94 */
-#define UIC_ETH0 0x00000080 /* Emac 0 */
-#define UIC_ETH1 0x00000040 /* Emac 1 */
-#define UIC_EHCI 0x00000020 /* USB2.0 Host EHCI */
-#define UIC_EIR4 0x00000010 /* External interrupt 4 */
-#define UIC_UIC2NC 0x00000008 /* UIC2 non-critical interrupt */
-#define UIC_UIC2C 0x00000004 /* UIC2 critical interrupt */
-#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
-#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
-
-/* For compatibility with 405 code */
-#define UIC_MAL_TXEOB UIC_MTE
-#define UIC_MAL_RXEOB UIC_MRE
-
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-
-#define UIC_RSVD0 0x80000000 /* N/A - unused */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_IIC1 0x10000000 /* IIC */
-#define UIC_PIM 0x08000000 /* PCI inbound message */
-#define UIC_PCRW 0x04000000 /* PCI command register write */
-#define UIC_PPM 0x02000000 /* PCI power management */
-#define UIC_PCIVPD 0x01000000 /* PCI VPD */
-#define UIC_MSI0 0x00800000 /* PCI MSI level 0 */
-#define UIC_EIR0 0x00400000 /* External interrupt 0 */
-#define UIC_UIC2NC 0x00200000 /* UIC2 non-critical interrupt */
-#define UIC_UIC2C 0x00100000 /* UIC2 critical interrupt */
-#define UIC_D0 0x00080000 /* DMA channel 0 */
-#define UIC_D1 0x00040000 /* DMA channel 1 */
-#define UIC_D2 0x00020000 /* DMA channel 2 */
-#define UIC_D3 0x00010000 /* DMA channel 3 */
-#define UIC_UIC3NC 0x00008000 /* UIC3 non-critical interrupt */
-#define UIC_UIC3C 0x00004000 /* UIC3 critical interrupt */
-#define UIC_EIR1 0x00002000 /* External interrupt 1 */
-#define UIC_TRNGDA 0x00001000 /* TRNG data available */
-#define UIC_PKAR1 0x00000800 /* PKA ready (PKA[1]) */
-#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */
-#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */
-#define UIC_I2OID 0x00000100 /* I2O inbound door bell */
-#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */
-#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */
-#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */
-#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */
-#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */
-#define UIC_EIP94 0x00000004 /* Security EIP94 */
-#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
-#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
-
-#elif !defined(CONFIG_440SPE)
-#define UIC_U0 0x80000000 /* UART 0 */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_IIC1 0x10000000 /* IIC */
-#define UIC_PIM 0x08000000 /* PCI inbound message */
-#define UIC_PCRW 0x04000000 /* PCI command register write */
-#define UIC_PPM 0x02000000 /* PCI power management */
-#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */
-#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
-#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
-#define UIC_MTE 0x00200000 /* MAL TXEOB */
-#define UIC_MRE 0x00100000 /* MAL RXEOB */
-#define UIC_D0 0x00080000 /* DMA channel 0 */
-#define UIC_D1 0x00040000 /* DMA channel 1 */
-#define UIC_D2 0x00020000 /* DMA channel 2 */
-#define UIC_D3 0x00010000 /* DMA channel 3 */
-#define UIC_RSVD0 0x00008000 /* Reserved */
-#define UIC_RSVD1 0x00004000 /* Reserved */
-#define UIC_CT0 0x00002000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00001000 /* GPT compare timer 1 */
-#define UIC_CT2 0x00000800 /* GPT compare timer 2 */
-#define UIC_CT3 0x00000400 /* GPT compare timer 3 */
-#define UIC_CT4 0x00000200 /* GPT compare timer 4 */
-#define UIC_EIR0 0x00000100 /* External interrupt 0 */
-#define UIC_EIR1 0x00000080 /* External interrupt 1 */
-#define UIC_EIR2 0x00000040 /* External interrupt 2 */
-#define UIC_EIR3 0x00000020 /* External interrupt 3 */
-#define UIC_EIR4 0x00000010 /* External interrupt 4 */
-#define UIC_EIR5 0x00000008 /* External interrupt 5 */
-#define UIC_EIR6 0x00000004 /* External interrupt 6 */
-#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
-#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
-#endif /* CONFIG_440GX */
-
-/* For compatibility with 405 code */
-#define UIC_MAL_TXEOB UIC_MTE
-#define UIC_MAL_RXEOB UIC_MRE
-
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller 1 interrupts (UIC1)
-+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440SP)
-#define UIC_EIR0 0x80000000 /* External interrupt 0 */
-#define UIC_MS 0x40000000 /* MAL SERR */
-#define UIC_MTDE 0x20000000 /* MAL TXDE */
-#define UIC_MRDE 0x10000000 /* MAL RXDE */
-#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_MTE 0x02000000 /* MAL TXEOB */
-#define UIC_MRE 0x01000000 /* MAL RXEOB */
-#define UIC_P0MSI1 0x00800000 /* PCI0 MSI level 1 */
-#define UIC_P1MSI1 0x00400000 /* PCI1 MSI level 1 */
-#define UIC_P2MSI1 0x00200000 /* PCI2 MSI level 1 */
-#define UIC_L2C 0x00100000 /* L2 cache */
-#define UIC_CT0 0x00080000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00040000 /* GPT compare timer 1 */
-#define UIC_CT2 0x00020000 /* GPT compare timer 2 */
-#define UIC_CT3 0x00010000 /* GPT compare timer 3 */
-#define UIC_CT4 0x00008000 /* GPT compare timer 4 */
-#define UIC_EIR1 0x00004000 /* External interrupt 1 */
-#define UIC_EIR2 0x00002000 /* External interrupt 2 */
-#define UIC_EIR3 0x00001000 /* External interrupt 3 */
-#define UIC_EIR4 0x00000800 /* External interrupt 4 */
-#define UIC_EIR5 0x00000400 /* External interrupt 5 */
-#define UIC_DMAE 0x00000200 /* DMA error */
-#define UIC_I2OE 0x00000100 /* I2O error */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_P0AE 0x00000040 /* PCI0 asynchronous error */
-#define UIC_P1AE 0x00000020 /* PCI1 asynchronous error */
-#define UIC_P2AE 0x00000010 /* PCI2 asynchronous error */
-#define UIC_ETH0 0x00000008 /* Ethernet 0 */
-#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
-#define UIC_ETH1 0x00000002 /* Reserved */
-#define UIC_XOR 0x00000001 /* XOR */
-#elif defined(CONFIG_440GX) || defined(CONFIG_440EP)
-#define UIC_MS 0x80000000 /* MAL SERR */
-#define UIC_MTDE 0x40000000 /* MAL TXDE */
-#define UIC_MRDE 0x20000000 /* MAL RXDE */
-#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/
-#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_EBMI 0x02000000 /* EBMI interrupt status */
-#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */
-#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */
-#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */
-#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */
-#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */
-#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */
-#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */
-#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */
-#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */
-#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */
-#define UIC_PPMI 0x00004000 /* PPM interrupt status */
-#define UIC_EIR7 0x00002000 /* External interrupt 7 */
-#define UIC_EIR8 0x00001000 /* External interrupt 8 */
-#define UIC_EIR9 0x00000800 /* External interrupt 9 */
-#define UIC_EIR10 0x00000400 /* External interrupt 10 */
-#define UIC_EIR11 0x00000200 /* External interrupt 11 */
-#define UIC_EIR12 0x00000100 /* External interrupt 12 */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_RSVD2 0x00000040 /* Reserved */
-#define UIC_RSVD3 0x00000020 /* Reserved */
-#define UIC_PAE 0x00000010 /* PCI asynchronous error */
-#define UIC_ETH0 0x00000008 /* Ethernet 0 */
-#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
-#define UIC_ETH1 0x00000002 /* Ethernet 1 */
-#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
-
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-
-#define UIC_EIR2 0x80000000 /* External interrupt 2 */
-#define UIC_U0 0x40000000 /* UART 0 */
-#define UIC_SPI 0x20000000 /* SPI */
-#define UIC_TRNGAL 0x10000000 /* TRNG alarm */
-#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_NDFC 0x02000000 /* NDFC */
-#define UIC_EIPPKPSE 0x01000000 /* EIPPKP slave error */
-#define UIC_P0MSI1 0x00800000 /* PCI0 MSI level 1 */
-#define UIC_P0MSI2 0x00400000 /* PCI0 MSI level 2 */
-#define UIC_P0MSI3 0x00200000 /* PCI0 MSI level 3 */
-#define UIC_L2C 0x00100000 /* L2 cache */
-#define UIC_CT0 0x00080000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00040000 /* GPT compare timer 1 */
-#define UIC_CT2 0x00020000 /* GPT compare timer 2 */
-#define UIC_CT3 0x00010000 /* GPT compare timer 3 */
-#define UIC_CT4 0x00008000 /* GPT compare timer 4 */
-#define UIC_CT5 0x00004000 /* GPT compare timer 5 */
-#define UIC_CT6 0x00002000 /* GPT compare timer 6 */
-#define UIC_GPTDC 0x00001000 /* GPT decrementer pulse */
-#define UIC_EIR3 0x00000800 /* External interrupt 3 */
-#define UIC_EIR4 0x00000400 /* External interrupt 4 */
-#define UIC_DMAE 0x00000200 /* DMA error */
-#define UIC_I2OE 0x00000100 /* I2O error */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_P0AE 0x00000040 /* PCI0 asynchronous error */
-#define UIC_EIR5 0x00000020 /* External interrupt 5 */
-#define UIC_EIR6 0x00000010 /* External interrupt 6 */
-#define UIC_U2 0x00000008 /* UART 2 */
-#define UIC_U3 0x00000004 /* UART 3 */
-#define UIC_EIR7 0x00000002 /* External interrupt 7 */
-#define UIC_EIR8 0x00000001 /* External interrupt 8 */
-
-#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-#define UIC_MS 0x80000000 /* MAL SERR */
-#define UIC_MTDE 0x40000000 /* MAL TXDE */
-#define UIC_MRDE 0x20000000 /* MAL RXDE */
-#define UIC_U2 0x10000000 /* UART 2 */
-#define UIC_U3 0x08000000 /* UART 3 */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_NDFC 0x02000000 /* NDFC */
-#define UIC_KSLE 0x01000000 /* KASUMI slave error */
-#define UIC_CT5 0x00800000 /* GPT compare timer 5 */
-#define UIC_CT6 0x00400000 /* GPT compare timer 6 */
-#define UIC_PLB34I0 0x00200000 /* PLB3X4X MIRQ0 */
-#define UIC_PLB34I1 0x00100000 /* PLB3X4X MIRQ1 */
-#define UIC_PLB34I2 0x00080000 /* PLB3X4X MIRQ2 */
-#define UIC_PLB34I3 0x00040000 /* PLB3X4X MIRQ3 */
-#define UIC_PLB34I4 0x00020000 /* PLB3X4X MIRQ4 */
-#define UIC_PLB34I5 0x00010000 /* PLB3X4X MIRQ5 */
-#define UIC_CT0 0x00008000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00004000 /* GPT compare timer 1 */
-#define UIC_EIR7 0x00002000 /* External interrupt 7 */
-#define UIC_EIR8 0x00001000 /* External interrupt 8 */
-#define UIC_EIR9 0x00000800 /* External interrupt 9 */
-#define UIC_CT2 0x00000400 /* GPT compare timer 2 */
-#define UIC_CT3 0x00000200 /* GPT compare timer 3 */
-#define UIC_CT4 0x00000100 /* GPT compare timer 4 */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_GPTDC 0x00000040 /* GPT decrementer pulse */
-#define UIC_RSVD0 0x00000020 /* Reserved */
-#define UIC_EPCIPER 0x00000010 /* External PCI PERR */
-#define UIC_EIR0 0x00000008 /* External interrupt 0 */
-#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
-#define UIC_EIR1 0x00000002 /* External interrupt 1 */
-#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
-
-/* For compatibility with 405 code */
-#define UIC_MAL_SERR UIC_MS
-#define UIC_MAL_TXDE UIC_MTDE
-#define UIC_MAL_RXDE UIC_MRDE
-#define UIC_ENET UIC_ETH0
-
-#elif !defined(CONFIG_440SPE)
-#define UIC_MS 0x80000000 /* MAL SERR */
-#define UIC_MTDE 0x40000000 /* MAL TXDE */
-#define UIC_MRDE 0x20000000 /* MAL RXDE */
-#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/
-#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_EBMI 0x02000000 /* EBMI interrupt status */
-#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */
-#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */
-#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */
-#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */
-#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */
-#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */
-#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */
-#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */
-#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */
-#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */
-#define UIC_PPMI 0x00004000 /* PPM interrupt status */
-#define UIC_EIR7 0x00002000 /* External interrupt 7 */
-#define UIC_EIR8 0x00001000 /* External interrupt 8 */
-#define UIC_EIR9 0x00000800 /* External interrupt 9 */
-#define UIC_EIR10 0x00000400 /* External interrupt 10 */
-#define UIC_EIR11 0x00000200 /* External interrupt 11 */
-#define UIC_EIR12 0x00000100 /* External interrupt 12 */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_RSVD2 0x00000040 /* Reserved */
-#define UIC_RSVD3 0x00000020 /* Reserved */
-#define UIC_PAE 0x00000010 /* PCI asynchronous error */
-#define UIC_ETH0 0x00000008 /* Ethernet 0 */
-#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
-#define UIC_ETH1 0x00000002 /* Ethernet 1 */
-#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
-#endif /* CONFIG_440SP */
-
-/* For compatibility with 405 code */
-#define UIC_MAL_SERR UIC_MS
-#define UIC_MAL_TXDE UIC_MTDE
-#define UIC_MAL_RXDE UIC_MRDE
-#define UIC_ENET UIC_ETH0
-
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller 2 interrupts (UIC2)
-+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440GX)
-#define UIC_ETH2 0x80000000 /* Ethernet 2 */
-#define UIC_EWU2 0x40000000 /* Ethernet 2 wakeup */
-#define UIC_ETH3 0x20000000 /* Ethernet 3 */
-#define UIC_EWU3 0x10000000 /* Ethernet 3 wakeup */
-#define UIC_TAH0 0x08000000 /* TAH 0 */
-#define UIC_TAH1 0x04000000 /* TAH 1 */
-#define UIC_IMUOBFQ 0x02000000 /* IMU outbound free queue */
-#define UIC_IMUIBPQ 0x01000000 /* IMU inbound post queue */
-#define UIC_IMUIRQDB 0x00800000 /* IMU irq doorbell */
-#define UIC_IMUIBDB 0x00400000 /* IMU inbound doorbell */
-#define UIC_IMUMSG0 0x00200000 /* IMU inbound message 0 */
-#define UIC_IMUMSG1 0x00100000 /* IMU inbound message 1 */
-#define UIC_IMUTO 0x00080000 /* IMU timeout */
-#define UIC_MSI12 0x00040000 /* PCI MSI level 12 */
-#define UIC_MSI13 0x00020000 /* PCI MSI level 13 */
-#define UIC_MSI14 0x00010000 /* PCI MSI level 14 */
-#define UIC_MSI15 0x00008000 /* PCI MSI level 15 */
-#define UIC_EIR13 0x00004000 /* External interrupt 13 */
-#define UIC_EIR14 0x00002000 /* External interrupt 14 */
-#define UIC_EIR15 0x00001000 /* External interrupt 15 */
-#define UIC_EIR16 0x00000800 /* External interrupt 16 */
-#define UIC_EIR17 0x00000400 /* External interrupt 17 */
-#define UIC_PCIVPD 0x00000200 /* PCI VPD */
-#define UIC_L2C 0x00000100 /* L2 Cache */
-#define UIC_ETH2PCS 0x00000080 /* Ethernet 2 PCS */
-#define UIC_ETH3PCS 0x00000040 /* Ethernet 3 PCS */
-#define UIC_RSVD26 0x00000020 /* Reserved */
-#define UIC_RSVD27 0x00000010 /* Reserved */
-#define UIC_RSVD28 0x00000008 /* Reserved */
-#define UIC_RSVD29 0x00000004 /* Reserved */
-#define UIC_RSVD30 0x00000002 /* Reserved */
-#define UIC_RSVD31 0x00000001 /* Reserved */
-
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-
-#define UIC_TAH0 0x80000000 /* TAHOE 0 */
-#define UIC_TAH1 0x40000000 /* TAHOE 1 */
-#define UIC_EIR9 0x20000000 /* External interrupt 9 */
-#define UIC_MS 0x10000000 /* MAL SERR */
-#define UIC_MTDE 0x08000000 /* MAL TXDE */
-#define UIC_MRDE 0x04000000 /* MAL RXDE */
-#define UIC_MTE 0x02000000 /* MAL TXEOB */
-#define UIC_MRE 0x01000000 /* MAL RXEOB */
-#define UIC_MCTX0 0x00800000 /* MAL interrupt coalescence TX0 */
-#define UIC_MCTX1 0x00400000 /* MAL interrupt coalescence TX1 */
-#define UIC_MCTX2 0x00200000 /* MAL interrupt coalescence TX2 */
-#define UIC_MCTX3 0x00100000 /* MAL interrupt coalescence TX3 */
-#define UIC_MCTR0 0x00080000 /* MAL interrupt coalescence TR0 */
-#define UIC_MCTR1 0x00040000 /* MAL interrupt coalescence TR1 */
-#define UIC_MCTR2 0x00020000 /* MAL interrupt coalescence TR2 */
-#define UIC_MCTR3 0x00010000 /* MAL interrupt coalescence TR3 */
-#define UIC_ETH0 0x00008000 /* Ethernet 0 */
-#define UIC_ETH1 0x00004000 /* Ethernet 1 */
-#define UIC_ETH2 0x00002000 /* Ethernet 2 */
-#define UIC_ETH3 0x00001000 /* Ethernet 3 */
-#define UIC_EWU0 0x00000800 /* Ethernet 0 wakeup */
-#define UIC_EWU1 0x00000400 /* Ethernet 1 wakeup */
-#define UIC_EWU2 0x00000200 /* Ethernet 2 wakeup */
-#define UIC_EWU3 0x00000100 /* Ethernet 3 wakeup */
-#define UIC_EIR10 0x00000080 /* External interrupt 10 */
-#define UIC_EIR11 0x00000040 /* External interrupt 11 */
-#define UIC_RSVD2 0x00000020 /* Reserved */
-#define UIC_PLB4XAHB 0x00000010 /* PLB4XAHB / AHBARB error */
-#define UIC_OTG 0x00000008 /* USB2.0 OTG */
-#define UIC_EHCI 0x00000004 /* USB2.0 Host EHCI */
-#define UIC_OHCI 0x00000002 /* USB2.0 Host OHCI */
-#define UIC_OHCISMI 0x00000001 /* USB2.0 Host OHCI SMI */
-
-#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */
-
-#define UIC_EIR5 0x80000000 /* External interrupt 5 */
-#define UIC_EIR6 0x40000000 /* External interrupt 6 */
-#define UIC_OPB 0x20000000 /* OPB to PLB bridge interrupt stat */
-#define UIC_EIR2 0x10000000 /* External interrupt 2 */
-#define UIC_EIR3 0x08000000 /* External interrupt 3 */
-#define UIC_DDR2 0x04000000 /* DDR2 sdram */
-#define UIC_MCTX0 0x02000000 /* MAl intp coalescence TX0 */
-#define UIC_MCTX1 0x01000000 /* MAl intp coalescence TX1 */
-#define UIC_MCTR0 0x00800000 /* MAl intp coalescence TR0 */
-#define UIC_MCTR1 0x00400000 /* MAl intp coalescence TR1 */
-
-#endif /* CONFIG_440GX */
-
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller Base 0 interrupts (UICB0)
-+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440GX)
-#define UICB0_UIC0CI 0x80000000 /* UIC0 Critical Interrupt */
-#define UICB0_UIC0NCI 0x40000000 /* UIC0 Noncritical Interrupt */
-#define UICB0_UIC1CI 0x20000000 /* UIC1 Critical Interrupt */
-#define UICB0_UIC1NCI 0x10000000 /* UIC1 Noncritical Interrupt */
-#define UICB0_UIC2CI 0x08000000 /* UIC2 Critical Interrupt */
-#define UICB0_UIC2NCI 0x04000000 /* UIC2 Noncritical Interrupt */
-
-#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
- UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
-
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-
-#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */
-#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */
-#define UICB0_UIC2NCI 0x00200000 /* UIC2 Noncritical Interrupt */
-#define UICB0_UIC2CI 0x00100000 /* UIC2 Critical Interrupt */
-#define UICB0_UIC3NCI 0x00008000 /* UIC3 Noncritical Interrupt */
-#define UICB0_UIC3CI 0x00004000 /* UIC3 Critical Interrupt */
-
-#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \
- UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI)
-
-#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */
-#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */
-#define UICB0_UIC2CI 0x00000004 /* UIC2 Critical Interrupt */
-#define UICB0_UIC2NCI 0x00000008 /* UIC2 Noncritical Interrupt */
-
-#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
- UICB0_UIC1CI | UICB0_UIC2NCI)
-
-#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
-
-#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */
-#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */
-
-#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI)
-
-#endif /* CONFIG_440GX */
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller interrupts
-+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440SPE)
-/*#define UICB0_UIC0CI 0x80000000*/ /* UIC0 Critical Interrupt */
-/*#define UICB0_UIC0NCI 0x40000000*/ /* UIC0 Noncritical Interrupt */
-#define UICB0_UIC1CI 0x00000002 /* UIC1 Critical Interrupt */
-#define UICB0_UIC1NCI 0x00000001 /* UIC1 Noncritical Interrupt */
-#define UICB0_UIC2CI 0x00200000 /* UIC2 Critical Interrupt */
-#define UICB0_UIC2NCI 0x00100000 /* UIC2 Noncritical Interrupt */
-#define UICB0_UIC3CI 0x00008000 /* UIC3 Critical Interrupt */
-#define UICB0_UIC3NCI 0x00004000 /* UIC3 Noncritical Interrupt */
-
-#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \
- UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI)
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller 0 interrupts (UIC0)
-+---------------------------------------------------------------------------*/
-#define UIC_U0 0x80000000 /* UART 0 */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_IIC1 0x10000000 /* IIC */
-#define UIC_PIM 0x08000000 /* PCI inbound message */
-#define UIC_PCRW 0x04000000 /* PCI command register write */
-#define UIC_PPM 0x02000000 /* PCI power management */
-#define UIC_PVPDA 0x01000000 /* PCIx 0 vpd access */
-#define UIC_MSI0 0x00800000 /* PCIx MSI level 0 */
-#define UIC_EIR15 0x00400000 /* External intp 15 */
-#define UIC_PEMSI0 0x00080000 /* PCIe MSI level 0 */
-#define UIC_PEMSI1 0x00040000 /* PCIe MSI level 1 */
-#define UIC_PEMSI2 0x00020000 /* PCIe MSI level 2 */
-#define UIC_PEMSI3 0x00010000 /* PCIe MSI level 3 */
-#define UIC_EIR14 0x00002000 /* External interrupt 14 */
-#define UIC_D0CPFF 0x00001000 /* DMA0 cp fifo full */
-#define UIC_D0CSNS 0x00000800 /* DMA0 cs fifo needs service */
-#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */
-#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */
-#define UIC_I2OID 0x00000100 /* I2O inbound door bell */
-#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */
-#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */
-#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */
-#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */
-#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */
-#define UIC_CPTCNT 0x00000004 /* GPT Count Timer */
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller 1 interrupts (UIC1)
-+---------------------------------------------------------------------------*/
-#define UIC_EIR13 0x80000000 /* externei intp 13 */
-#define UIC_MS 0x40000000 /* MAL SERR */
-#define UIC_MTDE 0x20000000 /* MAL TXDE */
-#define UIC_MRDE 0x10000000 /* MAL RXDE */
-#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_MTE 0x02000000 /* MAL TXEOB */
-#define UIC_MRE 0x01000000 /* MAL RXEOB */
-#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
-#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
-#define UIC_MSI3 0x00200000 /* PCI MSI level 3 */
-#define UIC_L2C 0x00100000 /* L2 cache */
-#define UIC_CT0 0x00080000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00040000 /* GPT compare timer 1 */
-#define UIC_CT2 0x00020000 /* GPT compare timer 2 */
-#define UIC_CT3 0x00010000 /* GPT compare timer 3 */
-#define UIC_CT4 0x00008000 /* GPT compare timer 4 */
-#define UIC_EIR12 0x00004000 /* External interrupt 12 */
-#define UIC_EIR11 0x00002000 /* External interrupt 11 */
-#define UIC_EIR10 0x00001000 /* External interrupt 10 */
-#define UIC_EIR9 0x00000800 /* External interrupt 9 */
-#define UIC_EIR8 0x00000400 /* External interrupt 8 */
-#define UIC_DMAE 0x00000200 /* dma error */
-#define UIC_I2OE 0x00000100 /* i2o error */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_PCIXAE 0x00000040 /* Pcix0 async error */
-#define UIC_EIR7 0x00000020 /* External interrupt 7 */
-#define UIC_EIR6 0x00000010 /* External interrupt 6 */
-#define UIC_ETH0 0x00000008 /* Ethernet 0 */
-#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
-#define UIC_ETH1 0x00000002 /* reserved */
-#define UIC_XOR 0x00000001 /* xor */
-
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller 2 interrupts (UIC2)
-+---------------------------------------------------------------------------*/
-#define UIC_PEOAL 0x80000000 /* PE0 AL */
-#define UIC_PEOVA 0x40000000 /* PE0 VPD access */
-#define UIC_PEOHRR 0x20000000 /* PE0 Host reset request rising */
-#define UIC_PE0HRF 0x10000000 /* PE0 Host reset request falling */
-#define UIC_PE0TCR 0x08000000 /* PE0 TCR */
-#define UIC_PE0BVCO 0x04000000 /* PE0 Busmaster VCO */
-#define UIC_PE0DCRE 0x02000000 /* PE0 DCR error */
-#define UIC_PE1AL 0x00800000 /* PE1 AL */
-#define UIC_PE1VA 0x00400000 /* PE1 VPD access */
-#define UIC_PE1HRR 0x00200000 /* PE1 Host reset request rising */
-#define UIC_PE1HRF 0x00100000 /* PE1 Host reset request falling */
-#define UIC_PE1TCR 0x00080000 /* PE1 TCR */
-#define UIC_PE1BVCO 0x00040000 /* PE1 Busmaster VCO */
-#define UIC_PE1DCRE 0x00020000 /* PE1 DCR error */
-#define UIC_PE2AL 0x00008000 /* PE2 AL */
-#define UIC_PE2VA 0x00004000 /* PE2 VPD access */
-#define UIC_PE2HRR 0x00002000 /* PE2 Host reset request rising */
-#define UIC_PE2HRF 0x00001000 /* PE2 Host reset request falling */
-#define UIC_PE2TCR 0x00000800 /* PE2 TCR */
-#define UIC_PE2BVCO 0x00000400 /* PE2 Busmaster VCO */
-#define UIC_PE2DCRE 0x00000200 /* PE2 DCR error */
-#define UIC_EIR5 0x00000080 /* External interrupt 5 */
-#define UIC_EIR4 0x00000040 /* External interrupt 4 */
-#define UIC_EIR3 0x00000020 /* External interrupt 3 */
-#define UIC_EIR2 0x00000010 /* External interrupt 2 */
-#define UIC_EIR1 0x00000008 /* External interrupt 1 */
-#define UIC_EIR0 0x00000004 /* External interrupt 0 */
-#endif /* CONFIG_440SPE */
-
/*-----------------------------------------------------------------------------+
| SDR0 Bit Settings
+-----------------------------------------------------------------------------*/
projects / u-boot / commitdiff