]> git.sur5r.net Git - u-boot/commitdiff
mtd: nand: omap_gpmc: remove unused members of 'struct nand_bch_priv'
authorpekon gupta <pekon@ti.com>
Fri, 11 Apr 2014 07:25:32 +0000 (12:55 +0530)
committerTom Rini <trini@ti.com>
Fri, 6 Jun 2014 21:45:51 +0000 (17:45 -0400)
This patch prepares to refactor 'struct nand_bch_priv' -> 'struct omap_nand_info'
And thus performs following clean-ups:
 - remove nand_bch_priv.type: use nand_bch_priv.ecc_scheme instead
 - remove nand_bch_priv.mode: <unused>

Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Stefan Roese <sr@denx.de>
drivers/mtd/nand/omap_gpmc.c

index e84bc7b060c1d5cdc15ea94e89af26a3103614f7..1972b0ecae67a1092b1f7fdb9dddd3efacdfc5e2 100644 (file)
@@ -151,17 +151,10 @@ static int __maybe_unused omap_correct_data(struct mtd_info *mtd, uint8_t *dat,
  * Generic BCH interface
  */
 struct nand_bch_priv {
-       uint8_t mode;
-       uint8_t type;
        struct bch_control *control;
        enum omap_ecc ecc_scheme;
 };
 
-/* bch types */
-#define ECC_BCH4       0
-#define ECC_BCH8       1
-#define ECC_BCH16      2
-
 /*
  * This can be a single instance cause all current users have only one NAND
  * with nearly the same setup (BCH8, some with ELM and others with sw BCH
@@ -169,7 +162,6 @@ struct nand_bch_priv {
  * When some users with other BCH strength will exists this have to change!
  */
 static __maybe_unused struct nand_bch_priv bch_priv = {
-       .type = ECC_BCH8,
        .control = NULL
 };
 
@@ -342,6 +334,7 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
        uint32_t eccbytes = chip->ecc.bytes;
        uint32_t error_count = 0, error_max;
        uint32_t error_loc[8];
+       enum bch_level bch_type;
        uint32_t i, ecc_flag = 0;
        uint8_t count, err = 0;
        uint32_t byte_pos, bit_pos;
@@ -369,22 +362,22 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
         */
        switch (bch->ecc_scheme) {
        case OMAP_ECC_BCH8_CODE_HW:
+               bch_type = BCH_8_BIT;
                omap_reverse_list(calc_ecc, eccbytes - 1);
                break;
        default:
                return -EINVAL;
        }
        /* use elm module to check for errors */
-       elm_config((enum bch_level)(bch->type));
-       if (elm_check_error(calc_ecc, (enum bch_level)bch->type,
-                                       &error_count, error_loc)) {
+       elm_config(bch_type);
+       if (elm_check_error(calc_ecc, bch_type, &error_count, error_loc)) {
                printf("nand: error: uncorrectable ECC errors\n");
                return -EINVAL;
        }
        /* correct bch error */
        for (count = 0; count < error_count; count++) {
-               switch (bch->type) {
-               case ECC_BCH8:
+               switch (bch->ecc_scheme) {
+               case OMAP_ECC_BCH8_CODE_HW:
                        /* 14th byte in ECC is reserved to match ROM layout */
                        error_max = SECTOR_BYTES + (eccbytes - 1);
                        break;
@@ -562,7 +555,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
                /* For this ecc-scheme, ecc.bytes, ecc.layout, ... are
                 * initialized in nand_scan_tail(), so just set ecc.mode */
                bch_priv.control        = NULL;
-               bch_priv.type           = 0;
                nand->ecc.mode          = NAND_ECC_SOFT;
                nand->ecc.layout        = NULL;
                nand->ecc.size          = 0;
@@ -578,7 +570,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
                        return -EINVAL;
                }
                bch_priv.control        = NULL;
-               bch_priv.type           = 0;
                /* populate ecc specific fields */
                memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
                nand->ecc.mode          = NAND_ECC_HW;
@@ -617,7 +608,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
                        printf("nand: error: could not init_bch()\n");
                        return -ENODEV;
                }
-               bch_priv.type = ECC_BCH8;
                /* populate ecc specific fields */
                memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
                nand->ecc.mode          = NAND_ECC_HW;
@@ -659,7 +649,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
                }
                /* intialize ELM for ECC error detection */
                elm_init();
-               bch_priv.type           = ECC_BCH8;
                /* populate ecc specific fields */
                memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
                nand->ecc.mode          = NAND_ECC_HW;