-<<<<<<< master
-======================================================================
-Changes since U-Boot 1.1.4:
-======================================================================
-=======
++commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
++Author: Wolfgang Denk <wd@pollux.denx.de>
++Date: Mon Nov 27 22:53:53 2006 +0100
++
++ Update CHANGELOG
++
+commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:43:25 2006 +0100
+
+ [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
+
+ Patch below corrects the setting of the zmiifer register, it was
+ overwritting the register rather than ORing the settings.
+
+ Signed-off-by: Neil Wilson <NWilson@airspan.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d1a72545296800b7e219f93104ad5836f0003d66
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:34:10 2006 +0100
+
+ [PATCH] Select NAND embedded environment from board configuration
+
+ The current NAND Bootloader setup forces the environment
+ variables to be in line with the bootloader. This change
+ enables the configuration to be made in the board include
+ file instead so that it can be individually enabled.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 15784862857c3c2214498defcfed84ff137fb81e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:22:19 2006 +0100
+
+ [PATCH] nand_wait() timeout fixes
+
+ Two fixes for the nand_wait() function in
+ drivers/nand/nand_base.c:
+
+ 1. Use correct timeouts. The original timeouts in Linux
+ source are 400ms and 20ms not 40s and 20s
+
+ 2. Return correct error value in case of timeout. 0 is
+ interpreted as OK.
+
+ Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit da5553b095bf04f4f109ad7e565dae3aba47b230
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:04:06 2006 +0100
+
+ [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
+
+ This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
+ arguments to bootm. It removes the getenv("disable_of") test that used
+ to be used for this purpose.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit a9398e018593782c5fa7d0741955fc1256b34c1e
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 27 15:32:42 2006 +0100
+
+ Minor code cleanup. Update CHANGELOG.
+
+commit 78d620ebb5871d252270dedfad60c6568993b780
+Author: Wolfgang Denk <wd@atlas.denx.de>
+Date: Thu Nov 23 22:58:58 2006 +0100
+
+ Updates for TQM5200 modules:
+ - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
+ - simplify "udate" definitions
+
+commit 2053283304eeddf250d109e6791eb6fa4cad14f7
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 22 13:20:50 2006 +0100
+
+ [PATCH] PPC4xx start.S: Fix for processor errata
+
+ Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
+ errata 1.12: 440_33 by moving patch up in code.
+
+ Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4ef6251403f637841000e0fef9e832aa01339822
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 20 20:39:52 2006 +0100
+
+ [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 20 10:28:30 2006 +0100
+
+ Update CHANGELOG
+
commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
Author: Stefan Roese <sr@denx.de>
Date: Mon Nov 13 13:55:24 2006 +0100