ARM: DT: stm32f7: add gpio device tree nodes

Also created alias for gpios for stm32f7 discovery board. Based on these
aliases, it would be possible to get gpio devices by sequence.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>

diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts
index f098d2eba316c62aa12090d4f3abf6b259812575..f830aa90efd91eddcad9373a8cb2dfa20653c9ba 100644 (file)
--- a/arch/arm/dts/stm32f746-disco.dts
+++ b/arch/arm/dts/stm32f746-disco.dts
@@ -65,6 +65,18 @@
        aliases {
                serial0 = &usart1;
                spi0 = &qspi;
+               /* Aliases for gpios so as to use sequence */
+               gpio0 = &gpioa;
+               gpio1 = &gpiob;
+               gpio2 = &gpioc;
+               gpio3 = &gpiod;
+               gpio4 = &gpioe;
+               gpio5 = &gpiof;
+               gpio6 = &gpiog;
+               gpio7 = &gpioh;
+               gpio8 = &gpioi;
+               gpio9 = &gpioj;
+               gpio10 = &gpiok;
        };
 };
 

diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi
index e9fd6f4e2ef5ceeab88683a7bf6c01ffda91e942..865d5cfbe43759a5a5aa2e669b96fdc222b0beff 100644 (file)
--- a/arch/arm/dts/stm32f746.dtsi
+++ b/arch/arm/dts/stm32f746.dtsi
@@ -114,6 +114,117 @@
                        u-boot,dm-pre-reloc;
                        pins-are-numbered;
 
+                       gpioa: gpio@40020000 {
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               compatible = "st,stm32-gpio";
+                               reg = <0x0 0x400>;
+                               clocks = <&rcc 0 0>;
+                               st,bank-name = "GPIOA";
+                               u-boot,dm-pre-reloc;
+                       };
+
+                       gpiob: gpio@40020400 {
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               compatible = "st,stm32-gpio";
+                               reg = <0x400 0x400>;
+                               clocks = <&rcc 0 1>;
+                               st,bank-name = "GPIOB";
+                               u-boot,dm-pre-reloc;
+                       };
+
+
+                       gpioc: gpio@40020800 {
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               compatible = "st,stm32-gpio";
+                               reg = <0x800 0x400>;
+                               clocks = <&rcc 0 2>;
+                               st,bank-name = "GPIOC";
+                               u-boot,dm-pre-reloc;
+                       };
+
+                       gpiod: gpio@40020c00 {
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               compatible = "st,stm32-gpio";
+                               reg = <0xc00 0x400>;
+                               clocks = <&rcc 0 3>;
+                               st,bank-name = "GPIOD";
+                               u-boot,dm-pre-reloc;
+                       };
+
+                       gpioe: gpio@40021000 {
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               compatible = "st,stm32-gpio";
+                               reg = <0x1000 0x400>;
+                               clocks = <&rcc 0 4>;
+                               st,bank-name = "GPIOE";
+                               u-boot,dm-pre-reloc;
+                       };
+
+                       gpiof: gpio@40021400 {
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               compatible = "st,stm32-gpio";
+                               reg = <0x1400 0x400>;
+                               clocks = <&rcc 0 5>;
+                               st,bank-name = "GPIOF";
+                               u-boot,dm-pre-reloc;
+                       };
+
+                       gpiog: gpio@40021800 {
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               compatible = "st,stm32-gpio";
+                               reg = <0x1800 0x400>;
+                               clocks = <&rcc 0 6>;
+                               st,bank-name = "GPIOG";
+                               u-boot,dm-pre-reloc;
+                       };
+
+                       gpioh: gpio@40021c00 {
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               compatible = "st,stm32-gpio";
+                               reg = <0x1c00 0x400>;
+                               clocks = <&rcc 0 7>;
+                               st,bank-name = "GPIOH";
+                               u-boot,dm-pre-reloc;
+                       };
+
+                       gpioi: gpio@40022000 {
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               compatible = "st,stm32-gpio";
+                               reg = <0x2000 0x400>;
+                               clocks = <&rcc 0 8>;
+                               st,bank-name = "GPIOI";
+                               u-boot,dm-pre-reloc;
+                       };
+
+                       gpioj: gpio@40022400 {
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               compatible = "st,stm32-gpio";
+                               reg = <0x2400 0x400>;
+                               clocks = <&rcc 0 9>;
+                               st,bank-name = "GPIOJ";
+                               u-boot,dm-pre-reloc;
+                       };
+
+                       gpiok: gpio@40022800 {
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               compatible = "st,stm32-gpio";
+                               reg = <0x2800 0x400>;
+                               clocks = <&rcc 0 10>;
+                               st,bank-name = "GPIOK";
+                               u-boot,dm-pre-reloc;
+                       };
+
                        usart1_pins_a: usart1@0 {
                                pins1 {
                                        pinmux = <STM32F746_PA9_FUNC_USART1_TX>;