--- /dev/null
+/*
+ * (C) Copyright 2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _INIT_HELPERS_H_
+#define _INIT_HELPERS_H_
+
+int display_banner(void);
+int display_dram_config(void);
+int init_baudrate_f(void);
+
+int mem_malloc_init_r(void);
+int init_bd_struct_r(void);
+int flash_init_r(void);
+int init_ip_address_r(void);
+int status_led_set_r(void);
+int set_bootfile_r(void);
+int set_load_addr_r(void);
+
+#endif /* !_INIT_HELPERS_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _INIT_WRAPPERS_H_
+#define _INIT_WRAPPERS_H_
+
+int serial_initialize_r(void);
+int env_relocate_r(void);
+int pci_init_r(void);
+int jumptable_init_r(void);
+int pcmcia_init_r(void);
+int kgdb_init_r(void);
+int enable_interrupts_r(void);
+int eth_initialize_r(void);
+int reset_phy_r(void);
+int ide_init_r(void);
+int scsi_init_r(void);
+int doc_init_r(void);
+int bb_miiphy_init_r(void);
+int post_run_r(void);
+
+#endif /* !_INIT_WRAPPERS_H_ */
COBJS-y += bootm.o
COBJS-y += cmd_boot.o
COBJS-y += gcc.o
+COBJS-y += init_helpers.o
+COBJS-y += init_wrappers.o
COBJS-y += interrupts.o
COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o
COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o
#include <common.h>
#include <watchdog.h>
-#include <command.h>
#include <stdio_dev.h>
-#include <version.h>
-#include <malloc.h>
-#include <net.h>
-#include <ide.h>
-#include <serial.h>
#include <asm/u-boot-x86.h>
#include <asm/processor.h>
-#ifdef CONFIG_BITBANGMII
-#include <miiphy.h>
-#endif
-
-/************************************************************************
- * Init Utilities *
- ************************************************************************
- * Some of this code should be moved into the core functions,
- * or dropped completely,
- * but let's get it working (again) first...
- */
-static int init_baudrate(void)
-{
- gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
- return 0;
-}
-
-static int display_banner(void)
-{
-
- printf("\n\n%s\n\n", version_string);
-
- return 0;
-}
-
-static int display_dram_config(void)
-{
- int i;
-
- puts("DRAM Configuration:\n");
-
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
- print_size(gd->bd->bi_dram[i].size, "\n");
- }
-
- return 0;
-}
-
-#ifndef CONFIG_SYS_NO_FLASH
-static void display_flash_config(ulong size)
-{
- puts("Flash: ");
- print_size(size, "\n");
-}
-#endif
+#include <asm/init_helpers.h>
+#include <asm/init_wrappers.h>
/*
* Breath some life into the board...
cpu_init_f,
board_early_init_f,
env_init,
- init_baudrate,
+ init_baudrate_f,
serial_init,
console_init_f,
dram_init_f,
};
init_fnc_t *init_sequence_r[] = {
- cpu_init_r, /* basic cpu dependent setup */
- board_early_init_r, /* basic board dependent setup */
- dram_init, /* configure available RAM banks */
- interrupt_init, /* set up exceptions */
+ init_bd_struct_r,
+ mem_malloc_init_r,
+ cpu_init_r,
+ board_early_init_r,
+ dram_init,
+ interrupt_init,
timer_init,
display_banner,
display_dram_config,
-
+#ifdef CONFIG_SERIAL_MULTI
+ serial_initialize_r,
+#endif
+#ifndef CONFIG_SYS_NO_FLASH
+ flash_init_r,
+#endif
+ env_relocate_r,
+#ifdef CONFIG_CMD_NET
+ init_ip_address_r,
+#endif
+#ifdef CONFIG_PCI
+ pci_init_r,
+#endif
+ stdio_init,
+ jumptable_init_r,
+ console_init_r,
+#ifdef CONFIG_MISC_INIT_R
+ misc_init_r,
+#endif
+#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
+ pci_init_r,
+#endif
+#if defined(CONFIG_CMD_KGDB)
+ kgdb_init_r,
+#endif
+ enable_interrupts_r,
+#ifdef CONFIG_STATUS_LED
+ status_led_set_r,
+#endif
+ set_load_addr_r,
+#if defined(CONFIG_CMD_NET)
+ set_bootfile_r,
+#endif
+#if defined(CONFIG_CMD_IDE)
+ ide_init_r,
+#endif
+#if defined(CONFIG_CMD_SCSI)
+ scsi_init_r,
+#endif
+#if defined(CONFIG_CMD_DOC)
+ doc_init_r,
+#endif
+#ifdef CONFIG_BITBANGMII
+ bb_miiphy_init_r,
+#endif
+#if defined(CONFIG_CMD_NET)
+ eth_initialize_r,
+#ifdef CONFIG_RESET_PHY_R
+ reset_phy_r,
+#endif
+#endif
+#ifdef CONFIG_LAST_STAGE_INIT
+ last_stage_init,
+#endif
NULL,
};
+static void do_init_loop(init_fnc_t **init_fnc_ptr)
+{
+ for (; *init_fnc_ptr; ++init_fnc_ptr) {
+ WATCHDOG_RESET();
+ if ((*init_fnc_ptr)() != 0)
+ hang();
+ }
+}
+
static int calculate_relocation_address(void)
{
ulong text_start = (ulong)&__text_start;
return 0;
}
-/* Load U-Boot into RAM, initialize BSS, perform relocation adjustments */
+/* Perform all steps necessary to get RAM initialised ready for relocation */
void board_init_f(ulong boot_flags)
{
- init_fnc_t **init_fnc_ptr;
-
gd->flags = boot_flags;
- for (init_fnc_ptr = init_sequence_f; *init_fnc_ptr; ++init_fnc_ptr) {
- if ((*init_fnc_ptr)() != 0)
- hang();
- }
+ do_init_loop(init_sequence_f);
/*
* SDRAM is now initialised, U-Boot has been copied into SDRAM,
void board_init_r(gd_t *id, ulong dest_addr)
{
-#if defined(CONFIG_CMD_NET)
- char *s;
-#endif
-#ifndef CONFIG_SYS_NO_FLASH
- ulong size;
-#endif
- static bd_t bd_data;
- init_fnc_t **init_fnc_ptr;
-
- show_boot_progress(0x21);
+ gd->flags |= GD_FLG_RELOC;
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("" : : : "memory");
- gd->flags |= GD_FLG_RELOC;
-
- gd->bd = &bd_data;
- memset(gd->bd, 0, sizeof(bd_t));
- show_boot_progress(0x22);
-
- gd->baudrate = CONFIG_BAUDRATE;
-
- mem_malloc_init((((ulong)dest_addr - CONFIG_SYS_MALLOC_LEN)+3)&~3,
- CONFIG_SYS_MALLOC_LEN);
-
- for (init_fnc_ptr = init_sequence_r; *init_fnc_ptr; ++init_fnc_ptr) {
- if ((*init_fnc_ptr)() != 0)
- hang();
- }
- show_boot_progress(0x23);
-
-#ifdef CONFIG_SERIAL_MULTI
- serial_initialize();
-#endif
-
-#ifndef CONFIG_SYS_NO_FLASH
- /* configure available FLASH banks */
- size = flash_init();
- display_flash_config(size);
- show_boot_progress(0x24);
-#endif
-
- show_boot_progress(0x25);
-
- /* initialize environment */
- env_relocate();
- show_boot_progress(0x26);
-
-
-#ifdef CONFIG_CMD_NET
- /* IP Address */
- bd_data.bi_ip_addr = getenv_IPaddr("ipaddr");
-#endif
-
-#if defined(CONFIG_PCI)
- /*
- * Do pci configuration
- */
- pci_init();
-#endif
-
- show_boot_progress(0x27);
-
-
- stdio_init();
-
- jumptable_init();
-
- /* Initialize the console (after the relocation and devices init) */
- console_init_r();
-
-#ifdef CONFIG_MISC_INIT_R
- /* miscellaneous platform dependent initialisations */
- misc_init_r();
-#endif
-
-#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
- WATCHDOG_RESET();
- puts("PCMCIA:");
- pcmcia_init();
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
- WATCHDOG_RESET();
- puts("KGDB: ");
- kgdb_init();
-#endif
-
- /* enable exceptions */
- enable_interrupts();
- show_boot_progress(0x28);
-
-#ifdef CONFIG_STATUS_LED
- status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
-#endif
-
- udelay(20);
-
- /* Initialize from environment */
- load_addr = getenv_ulong("loadaddr", 16, load_addr);
-#if defined(CONFIG_CMD_NET)
- s = getenv("bootfile");
-
- if (s != NULL)
- copy_filename(BootFile, s, sizeof(BootFile));
-#endif
-
- WATCHDOG_RESET();
-
-#if defined(CONFIG_CMD_IDE)
- WATCHDOG_RESET();
- puts("IDE: ");
- ide_init();
-#endif
-
-#if defined(CONFIG_CMD_SCSI)
- WATCHDOG_RESET();
- puts("SCSI: ");
- scsi_init();
-#endif
-
-#if defined(CONFIG_CMD_DOC)
- WATCHDOG_RESET();
- puts("DOC: ");
- doc_init();
-#endif
-
-#ifdef CONFIG_BITBANGMII
- bb_miiphy_init();
-#endif
-#if defined(CONFIG_CMD_NET)
- WATCHDOG_RESET();
- puts("Net: ");
- eth_initialize(gd->bd);
-#endif
-
-#if (defined(CONFIG_CMD_NET)) && (0)
- WATCHDOG_RESET();
-# ifdef DEBUG
- puts("Reset Ethernet PHY\n");
-# endif
- reset_phy();
-#endif
-
-#ifdef CONFIG_LAST_STAGE_INIT
- WATCHDOG_RESET();
- /*
- * Some parts can be only initialized if all others (like
- * Interrupts) are up and running (i.e. the PC-style ISA
- * keyboard).
- */
- last_stage_init();
-#endif
-
-
-#ifdef CONFIG_POST
- post_run(NULL, POST_RAM | post_bootmode_get(0));
-#endif
-
- show_boot_progress(0x29);
+ do_init_loop(init_sequence_r);
/* main_loop() can return to retry autoboot, if so just run it again. */
for (;;)
--- /dev/null
+/*
+ * (C) Copyright 2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <command.h>
+#include <stdio_dev.h>
+#include <version.h>
+#include <malloc.h>
+#include <net.h>
+#include <ide.h>
+#include <serial.h>
+#include <status_led.h>
+#include <asm/u-boot-x86.h>
+
+#include <asm/init_helpers.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/************************************************************************
+ * Init Utilities *
+ ************************************************************************
+ * Some of this code should be moved into the core functions,
+ * or dropped completely,
+ * but let's get it working (again) first...
+ */
+
+int display_banner(void)
+{
+ printf("\n\n%s\n\n", version_string);
+
+ return 0;
+}
+
+int display_dram_config(void)
+{
+ int i;
+
+ puts("DRAM Configuration:\n");
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
+ print_size(gd->bd->bi_dram[i].size, "\n");
+ }
+
+ return 0;
+}
+
+int init_baudrate_f(void)
+{
+ gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
+ return 0;
+}
+
+int mem_malloc_init_r(void)
+{
+ mem_malloc_init(((gd->relocaddr - CONFIG_SYS_MALLOC_LEN)+3)&~3,
+ CONFIG_SYS_MALLOC_LEN);
+
+ return 0;
+}
+
+bd_t bd_data;
+
+int init_bd_struct_r(void)
+{
+ gd->bd = &bd_data;
+ memset(gd->bd, 0, sizeof(bd_t));
+
+ return 0;
+}
+
+#ifndef CONFIG_SYS_NO_FLASH
+int flash_init_r(void)
+{
+ ulong size;
+
+ puts("Flash: ");
+
+ /* configure available FLASH banks */
+ size = flash_init();
+
+ print_size(size, "\n");
+
+ return 0;
+}
+#endif
+
+int init_ip_address_r(void)
+{
+ /* IP Address */
+ bd_data.bi_ip_addr = getenv_IPaddr("ipaddr");
+
+ return 0;
+}
+
+#ifdef CONFIG_STATUS_LED
+int status_led_set_r(void)
+{
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
+
+ return 0;
+}
+#endif
+
+int set_bootfile_r(void)
+{
+ char *s;
+
+ s = getenv("bootfile");
+
+ if (s != NULL)
+ copy_filename(BootFile, s, sizeof(BootFile));
+
+ return 0;
+}
+
+int set_load_addr_r(void)
+{
+ /* Initialize from environment */
+ load_addr = getenv_ulong("loadaddr", 16, load_addr);
+
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <serial.h>
+#include <kgdb.h>
+#include <scsi.h>
+#include <post.h>
+#include <miiphy.h>
+
+#include <asm/init_wrappers.h>
+
+int serial_initialize_r(void)
+{
+ serial_initialize();
+
+ return 0;
+}
+
+int env_relocate_r(void)
+{
+ /* initialize environment */
+ env_relocate();
+
+ return 0;
+}
+
+
+int pci_init_r(void)
+{
+ /* Do pci configuration */
+ pci_init();
+
+ return 0;
+}
+
+int jumptable_init_r(void)
+{
+ jumptable_init();
+
+ return 0;
+}
+
+int pcmcia_init_r(void)
+{
+ puts("PCMCIA:");
+ pcmcia_init();
+
+ return 0;
+}
+
+int kgdb_init_r(void)
+{
+ puts("KGDB: ");
+ kgdb_init();
+
+ return 0;
+}
+
+int enable_interrupts_r(void)
+{
+ /* enable exceptions */
+ enable_interrupts();
+
+ return 0;
+}
+
+int eth_initialize_r(void)
+{
+ puts("Net: ");
+ eth_initialize(gd->bd);
+
+ return 0;
+}
+
+int reset_phy_r(void)
+{
+#ifdef DEBUG
+ puts("Reset Ethernet PHY\n");
+#endif
+ reset_phy();
+
+ return 0;
+}
+
+int ide_init_r(void)
+{
+ puts("IDE: ");
+ ide_init();
+
+ return 0;
+}
+
+int scsi_init_r(void)
+{
+ puts("SCSI: ");
+ scsi_init();
+
+ return 0;
+}
+
+#ifdef CONFIG_BITBANGMII
+int bb_miiphy_init_r(void)
+{
+ bb_miiphy_init();
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_POST
+int post_run_r(void)
+{
+ post_run(NULL, POST_RAM | post_bootmode_get(0));
+
+ return 0;
+}
+#endif
projects / u-boot / commitdiff