armv8: ls1088ardb: Enable USB command RDB qspi-boot

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>

diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index d943a9efa32d82ae0a8faba702f5798f29827cbc..64b4fcf12b6493aa4966309706b4ae737a81ede4 100644 (file)
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -76,6 +76,20 @@
                num-cs = <4>;
        };
 
+       usb0: usb3@3100000 {
+               compatible = "fsl,layerscape-dwc3";
+               reg = <0x0 0x3100000 0x0 0x10000>;
+               interrupts = <0 80 0x4>; /* Level high type */
+               dr_mode = "host";
+       };
+
+       usb1: usb3@3110000 {
+               compatible = "fsl,layerscape-dwc3";
+               reg = <0x0 0x3110000 0x0 0x10000>;
+               interrupts = <0 81 0x4>; /* Level high type */
+               dr_mode = "host";
+       };
+
        pcie@3400000 {
                compatible = "fsl,ls-pcie", "snps,dw-pcie";
                reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */

diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig
index 0909c0ab35080d0b10d24c01800593ca81801ccc..bd44fa99df0e9e99926713fc1fbefb840fca3e76 100644 (file)
--- a/configs/ls1088ardb_qspi_defconfig
+++ b/configs/ls1088ardb_qspi_defconfig
@@ -31,3 +31,11 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_CMD_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y

diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h
index bd54089722f95cafd1a94287d0deac987ccd466c..a916afb885a4a7c7f1ef9235a9b15d0607613382 100644 (file)
--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -58,7 +58,7 @@ struct fsl_xhci {
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
-#elif defined(CONFIG_ARCH_LS2080A)
+#elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0