]> git.sur5r.net Git - u-boot/commitdiff
arm: marvell: Extract kirkwood gpio functions into new common file gpio.c
authorStefan Roese <sr@denx.de>
Wed, 22 Oct 2014 10:13:11 +0000 (12:13 +0200)
committerTom Rini <trini@ti.com>
Thu, 23 Oct 2014 13:59:21 +0000 (09:59 -0400)
This makes is possible to use those gpio functions from other MVEBU SoC's as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Luka Perkov <luka@openwrt.org>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
24 files changed:
arch/arm/cpu/arm926ejs/kirkwood/cpu.c
arch/arm/include/asm/arch-kirkwood/cpu.h
arch/arm/include/asm/arch-kirkwood/gpio.h
arch/arm/include/asm/arch-kirkwood/soc.h
arch/arm/mvebu-common/Makefile
arch/arm/mvebu-common/gpio.c [new file with mode: 0644]
board/LaCie/net2big_v2/net2big_v2.c
board/LaCie/netspace_v2/netspace_v2.c
board/LaCie/wireless_space/wireless_space.c
board/Marvell/dreamplug/dreamplug.c
board/Marvell/guruplug/guruplug.c
board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
board/Marvell/openrd/openrd.c
board/Marvell/rd6281a/rd6281a.c
board/Marvell/sheevaplug/sheevaplug.c
board/Seagate/dockstar/dockstar.c
board/Seagate/goflexhome/goflexhome.c
board/buffalo/lsxl/lsxl.c
board/cloudengines/pogo_e02/pogo_e02.c
board/d-link/dns325/dns325.c
board/iomega/iconnect/iconnect.c
board/karo/tk71/tk71.c
board/keymile/km_arm/km_arm.c
board/raidsonic/ib62x0/ib62x0.c

index 75d3799c27905904c91012881b9bcbc94b69afda..ea835fca8a04725017af25a1d2070ad6bab17eb5 100644 (file)
@@ -139,23 +139,6 @@ int kw_config_adr_windows(void)
        return 0;
 }
 
-/*
- * kw_config_gpio - GPIO configuration
- */
-void kw_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val, u32 gpp0_oe, u32 gpp1_oe)
-{
-       struct kwgpio_registers *gpio0reg =
-               (struct kwgpio_registers *)KW_GPIO0_BASE;
-       struct kwgpio_registers *gpio1reg =
-               (struct kwgpio_registers *)KW_GPIO1_BASE;
-
-       /* Init GPIOS to default values as per board requirement */
-       writel(gpp0_oe_val, &gpio0reg->dout);
-       writel(gpp1_oe_val, &gpio1reg->dout);
-       writel(gpp0_oe, &gpio0reg->oe);
-       writel(gpp1_oe, &gpio1reg->oe);
-}
-
 /*
  * kw_config_mpp - Multi-Purpose Pins Functionality configuration
  *
index 97daa403ce7f294400f90dde720de8a5720f24e0..5900a15abc1e2693491c89e70e22bdfeac0913bc 100644 (file)
@@ -144,7 +144,7 @@ unsigned int kw_sdram_bar(enum memory_bank bank);
 unsigned int kw_sdram_bs(enum memory_bank bank);
 void kw_sdram_size_adjust(enum memory_bank bank);
 int kw_config_adr_windows(void);
-void kw_config_gpio(unsigned int gpp0_oe_val, unsigned int gpp1_oe_val,
+void mvebu_config_gpio(unsigned int gpp0_oe_val, unsigned int gpp1_oe_val,
                unsigned int gpp0_oe, unsigned int gpp1_oe);
 int kw_config_mpp(unsigned int mpp0_7, unsigned int mpp8_15,
                unsigned int mpp16_23, unsigned int mpp24_31,
index 5f4d78608559dd60f7babb5f70090429e3a56d43..aa8c5da36d35c4b3102083b1f8f9c916f0e0f622 100644 (file)
 
 #define GPIO_MAX               50
 #define GPIO_OFF(pin)          (((pin) >> 5) ? 0x0040 : 0x0000)
-#define GPIO_OUT(pin)          (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x00)
-#define GPIO_IO_CONF(pin)      (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x04)
-#define GPIO_BLINK_EN(pin)     (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x08)
-#define GPIO_IN_POL(pin)       (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x0c)
-#define GPIO_DATA_IN(pin)      (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x10)
-#define GPIO_EDGE_CAUSE(pin)   (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x14)
-#define GPIO_EDGE_MASK(pin)    (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x18)
-#define GPIO_LEVEL_MASK(pin)   (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x1c)
+#define GPIO_OUT(pin)          (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x00)
+#define GPIO_IO_CONF(pin)      (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x04)
+#define GPIO_BLINK_EN(pin)     (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x08)
+#define GPIO_IN_POL(pin)       (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x0c)
+#define GPIO_DATA_IN(pin)      (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin)   (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin)    (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin)   (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x1c)
 
 /*
  * Kirkwood-specific GPIO API
index 29fb2d9d0988bc944619533e828b770ac517e5a1..332cc241e1e9ccf9a954f6c992117a5c00e96e8e 100644 (file)
@@ -26,8 +26,8 @@
 #define KW_UART0_BASE                  (KW_REGISTER(0x12000))
 #define KW_UART1_BASE                  (KW_REGISTER(0x12100))
 #define KW_MPP_BASE                    (KW_REGISTER(0x10000))
-#define KW_GPIO0_BASE                  (KW_REGISTER(0x10100))
-#define KW_GPIO1_BASE                  (KW_REGISTER(0x10140))
+#define MVEBU_GPIO0_BASE                       (KW_REGISTER(0x10100))
+#define MVEBU_GPIO1_BASE                       (KW_REGISTER(0x10140))
 #define KW_RTC_BASE                    (KW_REGISTER(0x10300))
 #define KW_NANDF_BASE                  (KW_REGISTER(0x10418))
 #define KW_SPI_BASE                    (KW_REGISTER(0x10600))
index 391a125203c72bfe531de534172011b482b7c9a3..9dcab6958c5de92c03fc8d6d189ac7a110d1fa6e 100644 (file)
@@ -7,5 +7,6 @@
 #
 
 obj-y  = dram.o
+obj-y  += gpio.o
 obj-$(CONFIG_ARMADA_XP) += mbus.o
 obj-y  += timer.o
diff --git a/arch/arm/mvebu-common/gpio.c b/arch/arm/mvebu-common/gpio.c
new file mode 100644 (file)
index 0000000..56e54e0
--- /dev/null
@@ -0,0 +1,30 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+/*
+ * mvebu_config_gpio - GPIO configuration
+ */
+void mvebu_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val,
+                      u32 gpp0_oe, u32 gpp1_oe)
+{
+       struct kwgpio_registers *gpio0reg =
+               (struct kwgpio_registers *)MVEBU_GPIO0_BASE;
+       struct kwgpio_registers *gpio1reg =
+               (struct kwgpio_registers *)MVEBU_GPIO1_BASE;
+
+       /* Init GPIOS to default values as per board requirement */
+       writel(gpp0_oe_val, &gpio0reg->dout);
+       writel(gpp1_oe_val, &gpio1reg->dout);
+       writel(gpp0_oe, &gpio0reg->oe);
+       writel(gpp1_oe, &gpio1reg->oe);
+}
index 471db77a9725ff03b62fcbcfd816722d44d7ecff..12a516e30ab6106d55c0f9c7a57cbb68c123f947 100644 (file)
@@ -26,8 +26,8 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_early_init_f(void)
 {
        /* GPIO configuration */
-       kw_config_gpio(NET2BIG_V2_OE_VAL_LOW, NET2BIG_V2_OE_VAL_HIGH,
-                       NET2BIG_V2_OE_LOW, NET2BIG_V2_OE_HIGH);
+       mvebu_config_gpio(NET2BIG_V2_OE_VAL_LOW, NET2BIG_V2_OE_VAL_HIGH,
+                         NET2BIG_V2_OE_LOW, NET2BIG_V2_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
index 6a16e7bf721f6c6354aabd21ac8858208e7c93b6..323e34a6c2dd0d1aac9d071398a53acd0dd47f0f 100644 (file)
@@ -24,8 +24,8 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_early_init_f(void)
 {
        /* Gpio configuration */
-       kw_config_gpio(NETSPACE_V2_OE_VAL_LOW, NETSPACE_V2_OE_VAL_HIGH,
-                       NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH);
+       mvebu_config_gpio(NETSPACE_V2_OE_VAL_LOW, NETSPACE_V2_OE_VAL_HIGH,
+                         NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
index 53f5d2f95b6332c787d82e38a64a29bf741671a1..15b34a388ce28891c8758fb69e23828f8b4b818e 100644 (file)
@@ -97,8 +97,8 @@ struct mv88e61xx_config swcfg = {
 int board_early_init_f(void)
 {
        /* Gpio configuration */
-       kw_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH,
-                       WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH);
+       mvebu_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH,
+                         WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        kirkwood_mpp_conf(kwmpp_config, NULL);
index 3c286be1dada7cc42d23a4ae1c9dbd83604ee685..07b7496f3a12fe28900b3859b070c7e2d95d88ba 100644 (file)
@@ -25,9 +25,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the  below configuration configures mainly initial LED status
         */
-       kw_config_gpio(DREAMPLUG_OE_VAL_LOW,
-                       DREAMPLUG_OE_VAL_HIGH,
-                       DREAMPLUG_OE_LOW, DREAMPLUG_OE_HIGH);
+       mvebu_config_gpio(DREAMPLUG_OE_VAL_LOW,
+                         DREAMPLUG_OE_VAL_HIGH,
+                         DREAMPLUG_OE_LOW, DREAMPLUG_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
index a5b42b43f417a1bae6cdb062c39eb15a2a721989..b18a30657baeab0e4e4e7541086ca32eb4e3cbfc 100644 (file)
@@ -22,9 +22,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the  below configuration configures mainly initial LED status
         */
-       kw_config_gpio(GURUPLUG_OE_VAL_LOW,
-                       GURUPLUG_OE_VAL_HIGH,
-                       GURUPLUG_OE_LOW, GURUPLUG_OE_HIGH);
+       mvebu_config_gpio(GURUPLUG_OE_VAL_LOW,
+                         GURUPLUG_OE_VAL_HIGH,
+                         GURUPLUG_OE_LOW, GURUPLUG_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
index ee665c19fd95c53bd392f6a9c7fbd7815edf1087..97fb61bc90ee73682d356447941d75f8ed554a2f 100644 (file)
@@ -24,9 +24,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the  below configuration configures mainly initial LED status
         */
-       kw_config_gpio(MV88F6281GTW_GE_OE_VAL_LOW,
-                       MV88F6281GTW_GE_OE_VAL_HIGH,
-                       MV88F6281GTW_GE_OE_LOW, MV88F6281GTW_GE_OE_HIGH);
+       mvebu_config_gpio(MV88F6281GTW_GE_OE_VAL_LOW,
+                         MV88F6281GTW_GE_OE_VAL_HIGH,
+                         MV88F6281GTW_GE_OE_LOW, MV88F6281GTW_GE_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
index 78ebb6442dcf1a2be3cd4a23161d01568d014f55..52dd08383dfa0df7f97568cdfe8cfd6a8ace2637 100644 (file)
@@ -27,9 +27,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the  below configuration configures mainly initial LED status
         */
-       kw_config_gpio(OPENRD_OE_VAL_LOW,
-                       OPENRD_OE_VAL_HIGH,
-                       OPENRD_OE_LOW, OPENRD_OE_HIGH);
+       mvebu_config_gpio(OPENRD_OE_VAL_LOW,
+                         OPENRD_OE_VAL_HIGH,
+                         OPENRD_OE_LOW, OPENRD_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
index 8248274b8f38cca85e6cfa9db03286ab5d697da9..df5fbea8ae528aa546a2c64e46543c055aabb894 100644 (file)
@@ -23,9 +23,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the  below configuration configures mainly initial LED status
         */
-       kw_config_gpio(RD6281A_OE_VAL_LOW,
-                       RD6281A_OE_VAL_HIGH,
-                       RD6281A_OE_LOW, RD6281A_OE_HIGH);
+       mvebu_config_gpio(RD6281A_OE_VAL_LOW,
+                         RD6281A_OE_VAL_HIGH,
+                         RD6281A_OE_LOW, RD6281A_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
index 4f17e091236b2843eeee0dd5a927e957a5cffc7c..18eeb4c0015534320be7b362368e5d2072bade55 100644 (file)
@@ -22,9 +22,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the  below configuration configures mainly initial LED status
         */
-       kw_config_gpio(SHEEVAPLUG_OE_VAL_LOW,
-                       SHEEVAPLUG_OE_VAL_HIGH,
-                       SHEEVAPLUG_OE_LOW, SHEEVAPLUG_OE_HIGH);
+       mvebu_config_gpio(SHEEVAPLUG_OE_VAL_LOW,
+                         SHEEVAPLUG_OE_VAL_HIGH,
+                         SHEEVAPLUG_OE_LOW, SHEEVAPLUG_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
index dc73dfaa3ab2470271611b178adc5b212f6701bf..838f578104d1310208a7ece50da87e807ee22776 100644 (file)
@@ -26,9 +26,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the  below configuration configures mainly initial LED status
         */
-       kw_config_gpio(DOCKSTAR_OE_VAL_LOW,
-                       DOCKSTAR_OE_VAL_HIGH,
-                       DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
+       mvebu_config_gpio(DOCKSTAR_OE_VAL_LOW,
+                         DOCKSTAR_OE_VAL_HIGH,
+                         DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
@@ -143,7 +143,7 @@ void reset_phy(void)
 
 static void set_leds(u32 leds, u32 blinking)
 {
-       struct kwgpio_registers *r = (struct kwgpio_registers *)KW_GPIO1_BASE;
+       struct kwgpio_registers *r = (struct kwgpio_registers *)MVEBU_GPIO1_BASE;
        u32 oe = readl(&r->oe) | BOTH_LEDS;
        writel(oe & ~leds, &r->oe);     /* active low */
        u32 bl = readl(&r->blink_en) & ~BOTH_LEDS;
index 3e4ae89368716acdacc9296278715da3e26791c5..c3f4cbf84dbb6c718325110ebf7520de48ebe6c8 100644 (file)
@@ -83,9 +83,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the  below configuration configures mainly initial LED status
         */
-       kw_config_gpio(GOFLEXHOME_OE_VAL_LOW,
-                      GOFLEXHOME_OE_VAL_HIGH,
-                      GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH);
+       mvebu_config_gpio(GOFLEXHOME_OE_VAL_LOW,
+                         GOFLEXHOME_OE_VAL_HIGH,
+                         GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH);
        kirkwood_mpp_conf(kwmpp_config, NULL);
        return 0;
 }
@@ -149,7 +149,7 @@ static void set_leds(u32 leds, u32 blinking)
        u32 oe;
        u32 bl;
 
-       r = (struct kwgpio_registers *)KW_GPIO1_BASE;
+       r = (struct kwgpio_registers *)MVEBU_GPIO1_BASE;
        oe = readl(&r->oe) | BOTH_LEDS;
        writel(oe & ~leds, &r->oe);     /* active low */
        bl = readl(&r->blink_en) & ~BOTH_LEDS;
index 6e648badd6a92c7ad5ea67290f5be1ecac99055e..bca7be5482d652ea3128cb62cb5c6007523ee226 100644 (file)
@@ -52,9 +52,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the below configuration configures mainly initial LED status
         */
-       kw_config_gpio(LSXL_OE_VAL_LOW,
-                       LSXL_OE_VAL_HIGH,
-                       LSXL_OE_LOW, LSXL_OE_HIGH);
+       mvebu_config_gpio(LSXL_OE_VAL_LOW,
+                         LSXL_OE_VAL_HIGH,
+                         LSXL_OE_LOW, LSXL_OE_HIGH);
 
        /*
         * Multi-Purpose Pins Functionality configuration
index ddc3fa62cbfaf6cd50bc7bf2560e5c3b1851c41f..314834f2ba25f7da249e5257d5328d8abb17ebbe 100644 (file)
@@ -26,9 +26,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the  below configuration configures mainly initial LED status
         */
-       kw_config_gpio(POGO_E02_OE_VAL_LOW,
-                       POGO_E02_OE_VAL_HIGH,
-                       POGO_E02_OE_LOW, POGO_E02_OE_HIGH);
+       mvebu_config_gpio(POGO_E02_OE_VAL_LOW,
+                         POGO_E02_OE_VAL_HIGH,
+                         POGO_E02_OE_LOW, POGO_E02_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
index f2f43f51972a5dacd73becdee2e57f96a2f52d66..fd23696fc3131cbde95aba809764f60c01277ba7 100644 (file)
@@ -24,8 +24,8 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_early_init_f(void)
 {
        /* Gpio configuration */
-       kw_config_gpio(DNS325_OE_VAL_LOW, DNS325_OE_VAL_HIGH,
-                       DNS325_OE_LOW, DNS325_OE_HIGH);
+       mvebu_config_gpio(DNS325_OE_VAL_LOW, DNS325_OE_VAL_HIGH,
+                         DNS325_OE_LOW, DNS325_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
index f376d3dd723cdd955e3b715b13c6581582d8e5bf..76c945a969630537c23fb86f86db33b4d3f9fbd7 100644 (file)
@@ -22,9 +22,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the below configuration configures mainly initial LED status
         */
-       kw_config_gpio(ICONNECT_OE_VAL_LOW,
-                       ICONNECT_OE_VAL_HIGH,
-                       ICONNECT_OE_LOW, ICONNECT_OE_HIGH);
+       mvebu_config_gpio(ICONNECT_OE_VAL_LOW,
+                         ICONNECT_OE_VAL_HIGH,
+                         ICONNECT_OE_LOW, ICONNECT_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
index e877aa35d83c014d603ace54b87bb1fa5b8b15e3..7aec5f9060fa7884ef5990e9f31eae2e22708a2d 100644 (file)
@@ -26,9 +26,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the  below configuration configures mainly initial LED status
         */
-       kw_config_gpio(TK71_OE_VAL_LOW,
-                       TK71_OE_VAL_HIGH,
-                       TK71_OE_LOW, TK71_OE_HIGH);
+       mvebu_config_gpio(TK71_OE_VAL_LOW,
+                         TK71_OE_VAL_HIGH,
+                         TK71_OE_LOW, TK71_OE_HIGH);
 
        /* Multi-Purpose Pins Functionality configuration */
        static const u32 kwmpp_config[] = {
index cd508d22bc15cdf99413e33f77efadcab12296ae..662146400975b86ee4fb18b9b18e418aa8fe5554 100644 (file)
@@ -222,8 +222,8 @@ int board_early_init_f(void)
        u32 tmp;
 
        /* set the 2 bitbang i2c pins as output gpios */
-       tmp = readl(KW_GPIO0_BASE + 4);
-       writel(tmp & (~KM_KIRKWOOD_SOFT_I2C_GPIOS) , KW_GPIO0_BASE + 4);
+       tmp = readl(MVEBU_GPIO0_BASE + 4);
+       writel(tmp & (~KM_KIRKWOOD_SOFT_I2C_GPIOS) , MVEBU_GPIO0_BASE + 4);
 #endif
        /* adjust SDRAM size for bank 0 */
        kw_sdram_size_adjust(0);
index 47956b24305dc34ba00c952cde3adc7ff793f329..dbcfb438134426ef2c7576a15f44993e5611e6fa 100644 (file)
@@ -24,9 +24,9 @@ int board_early_init_f(void)
         * There are maximum 64 gpios controlled through 2 sets of registers
         * the below configuration configures mainly initial LED status
         */
-       kw_config_gpio(IB62x0_OE_VAL_LOW,
-                       IB62x0_OE_VAL_HIGH,
-                       IB62x0_OE_LOW, IB62x0_OE_HIGH);
+       mvebu_config_gpio(IB62x0_OE_VAL_LOW,
+                         IB62x0_OE_VAL_HIGH,
+                         IB62x0_OE_LOW, IB62x0_OE_HIGH);
 
        /* Set SATA activity LEDs to default off */
        writel(MVSATAHC_LED_POLARITY_CTRL, MVSATAHC_LED_CONF_REG);