ambapp_dev_irqmp *irqmp = NULL;
ambapp_dev_gptimer *gptimer = NULL;
unsigned int gptimer_irq = 0;
-int leon3_snooping_avail = 0;
/*
* Breath some life into the CPU...
ambapp_bus_init(CONFIG_AMBAPP_IOAREA, CONFIG_SYS_CLK_FREQ, &ambapp_plb);
}
+/* If cache snooping is available in hardware the result will be set
+ * to 0x800000, otherwise 0.
+ */
+static unsigned int snoop_detect(void)
+{
+ unsigned int result;
+ asm("lda [%%g0] 2, %0" : "=r"(result));
+ return result & 0x00800000;
+}
+
int arch_cpu_init(void)
{
gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
gd->bus_clk = CONFIG_SYS_CLK_FREQ;
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+ gd->arch.snooping_available = snoop_detect();
+
return 0;
}
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f8-fb
SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! fc-ff
- .extern leon3_snooping_avail
-
.section ".text"
.extern _nomem_amba_init, _nomem_memory_ctrl_init
.align 4
nop
nop
-/* If CACHE snooping is available in hardware the
- * variable leon3_snooping_avail will be set to
- * 0x800000 else 0.
- */
-snoop_detect:
- sethi %hi(0x00800000), %o0
- lda [%g0] 2, %o1
- and %o0, %o1, %o0
- sethi %hi(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o1
- st %o0, [%lo(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)+%o1]
-
-/* call relocate*/
- nop
/* Call relocated init functions */
jump:
SPARC_LOAD_ADDRESS(cpu_init_f2, l7, o1)
#include <usb.h>
#include "usb_uhci.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#define USB_MAX_TEMP_TD 128 /* number of temporary TDs for bulk and control transfers */
#define USB_MAX_TEMP_INT_TD 32 /* number of temporary TDs for Interrupt transfers */
-extern int leon3_snooping_avail;
/*
#define out16r(address,data) (*(unsigned short *)(address) = \
(unsigned short)( \
if (qh_cntrl.dev_ptr != 0) { /* it's a device assigned check if this caused IRQ */
dev = (struct usb_device *)qh_cntrl.dev_ptr;
/* Flush cache now that hardware updated DATA and TDs/QHs */
- if (!leon3_snooping_avail)
+ if (!gd->arch.snooping_avail)
sparc_dcache_flush_all();
usb_get_td_status(&tmp_td[0], dev); /* update status */
if (!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
if (qh_bulk.dev_ptr != 0) { /* it's a device assigned check if this caused IRQ */
dev = (struct usb_device *)qh_bulk.dev_ptr;
/* Flush cache now that hardware updated DATA and TDs/QHs */
- if (!leon3_snooping_avail)
+ if (!gd->arch.snooping_avail)
sparc_dcache_flush_all();
usb_get_td_status(&tmp_td[0], dev); /* update status */
if (!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
* (C) Copyright 2002-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ * (C) Copyright 2007, 2015
+ * Daniel Hellstrom, Cobham, Gaisler, daniel@gaisler.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
struct arch_global_data {
void *uart;
unsigned int uart_freq;
+#ifdef CONFIG_LEON3
+ unsigned int snooping_available;
+#endif
};
#include <asm-generic/global_data.h>