#include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #if !defined(CONFIG_DB64360) && \
     !defined(CONFIG_DB64460) && \
 
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef  CONFIG_IDENT_STRING
 #define  CONFIG_IDENT_STRING "MPC512X"
 
 
 #include <linux/config.h>
 #include <asm/processor.h>
+#include <asm/u-boot.h>
 
 #ifndef  CONFIG_IDENT_STRING
 #define  CONFIG_IDENT_STRING ""
 
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef  CONFIG_IDENT_STRING
 #define  CONFIG_IDENT_STRING ""
 
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef         CONFIG_IDENT_STRING
 #define         CONFIG_IDENT_STRING ""
 
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef CONFIG_IDENT_STRING
 #define CONFIG_IDENT_STRING ""
 
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef  CONFIG_IDENT_STRING
 #define  CONFIG_IDENT_STRING ""
 
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef  CONFIG_IDENT_STRING
 #define  CONFIG_IDENT_STRING "MPC83XX"
 
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef        CONFIG_IDENT_STRING
 #define CONFIG_IDENT_STRING ""
 
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef  CONFIG_IDENT_STRING
 #define  CONFIG_IDENT_STRING ""
 
        unsigned long   bi_flbfreq;     /* Flexbus Freq, in MHz */
        unsigned long   bi_vcofreq;     /* VCO Freq, in MHz */
 #endif
-       unsigned long   bi_bootflags;   /* boot / reboot flag (for LynxOS) */
+       unsigned long   bi_bootflags;   /* boot / reboot flag (Unused) */
        unsigned long   bi_ip_addr;     /* IP Address */
        unsigned char   bi_enetaddr[6]; /* OLD: see README.enetaddr */
        unsigned short  bi_ethspeed;    /* Ethernet speed in Mbps */
 
        }
 #endif
 
-       bd->bi_bootflags = bootflag;    /* boot / reboot flag (for LynxOS)    */
-
        WATCHDOG_RESET ();
        bd->bi_intfreq = gd->cpu_clk;   /* Internal Freq, in Hz */
        bd->bi_busfreq = gd->bus_clk;   /* Bus Freq,      in Hz */
 
 #define CONFIG_SYS_OR1_PRELIM  0xFFFF8110              /* 64Kbyte address space */
 #define CONFIG_SYS_BR1_PRELIM  ((BCSR_ADDR) | BR_V)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /* values according to the manual */
 
 #define        BCSR0                   ((uint) (BCSR_ADDR + 0x00))
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value        */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define FLASH_BASE0_PRELIM     0xFFC00000      /* FLASH bank #0        */
 #define FLASH_BASE1_PRELIM     0xFFE00000      /* FLASH bank #1        */
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_OR6_PRELIM  0xFFFF8000      /* 32kB, 15 waits, cs after addr, no bursts */
 #define CONFIG_SYS_BR6_PRELIM  0x60000401      /* use GPCM for CS generation, 8 bit port */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
  */
 #define SPD_EEPROM_ADDRESS     0x50
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot              */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 8)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 /*
  * PCI OHCI controller
  */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 
 #define CONFIG_SYS_DUART_RST           (0x80000000 >> 14)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_CACHELINE_SIZE      16      /* For all MPC8xx chips                 */
 
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from flash     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
 
 #define CONFIG_SYS_MPC8220_CLKIN       30000000/* ... running at 30MHz */
 #define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot      */
-
 /*
  * Serial console configuration
  */
 
 
 #define CONFIG_SYS_L2_BAB7xx
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM           0x02    /* Software reboot */
-
-
 #define CONFIG_NET_MULTI                /* Multi ethernet cards support */
 #define CONFIG_TULIP
 #define CONFIG_TULIP_SELECT_MEDIA
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz     */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                  */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported              */
 
 /*
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value   */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                  */
-
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_GPIO0_TSRH          0x00000000
 #define CONFIG_SYS_GPIO0_TCR           0xF7FF8014
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-
 #define CONFIG_NO_SERIAL_EEPROM
 
 /*--------------------------------------------------------------------*/
 
 #define CONFIG_SYS_EEPROM_WP           (0x80000000 >> 8)    /* GPIO8 */
 #define CONFIG_SYS_PLD_RESET           (0x80000000 >> 12)   /* GPIO12 */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value        */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
-
-
 /*----------------------------------------------------------------------*/
 /* CPC45 Memory Map                                                    */
 /*----------------------------------------------------------------------*/
 
 #define CONFIG_SYS_PB_LED              (0x80000000 >> 16)   /* GPIO16 */
 #define CONFIG_SYS_INTA_FAKE           (0x80000000 >> 23)   /* GPIO23 */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 
 #define L2_ENABLE      (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                  */
-
 #define CONFIG_SYS_BOARD_ASM_INIT      1
 
 #define CPCI750_SLAVE_TEST     (((in8(0xf0300000) & 0x80) == 0) ? 0 : 1)
 
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_ENV_SIZE                (2048 - 512)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM          0x02    /* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 
 #define CONFIG_ENV_SIZE                (2048 - 512)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM          0x02    /* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 
 #define EEPROM_WRITE_ADDRESS 0xA0
 #define EEPROM_READ_ADDRESS  0xA1
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value        */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
 
 
 #define FLASH_BASE0_PRELIM     0xFFE00000      /* FLASH bank #0        */
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 
 #define L2_ENABLE      (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                  */
-
 #define CONFIG_SYS_BOARD_ASM_INIT      1
 
 #endif /* __CONFIG_H */
 
 
 #define L2_ENABLE      (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                  */
-
 #define CONFIG_SYS_BOARD_ASM_INIT      1
 
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_GPIO0_TSRH          0x00000000  /* 16 ... 31 */
 #define CONFIG_SYS_GPIO0_TCR           0xB7FE0014  /*  0 ... 31 */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
 
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_NAND_BASE_LIST      {CONFIG_SYS_NAND0_ADDR + CONFIG_SYS_NAND0_CS, \
                                 CONFIG_SYS_NAND1_ADDR + CONFIG_SYS_NAND1_CS}
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #endif
 #define L2_ENABLE   (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM           0x02    /* Software reboot */
-
 #define CONFIG_NET_MULTI        /* Multi ethernet cards support */
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *-----------------------------------------------------------------------
- *
- */
-
-/*
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01             /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02             /* Software reboot                  */
-
-
 #endif /* __CONFIG_H */
 
  */
 #define CONFIG_SYS_CACHELINE_SIZE      16      /* For all MPC8xx chips                 */
 
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from flash     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
  */
 #define SPD_EEPROM_ADDRESS      0x50
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_MAMR_8COL   0x18803112
 #define CONFIG_SYS_MAMR_9COL   0x18803112      /* same as 8 column because its just easier to port with*/
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_1X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 
 #define L2_ENABLE      (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                  */
-
 #define CONFIG_SYS_BOARD_ASM_INIT      1
 
 
 
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
 #define CONFIG_SYS_MAMR                0x13a01114
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD                   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM                  0x02            /* Software reboot                      */
 
 /* values according to the manual */
 
 
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
 #define CONFIG_SYS_MAMR                0x13a01114
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD                   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM                  0x02            /* Software reboot                      */
-
 
 /* values according to the manual */
 
 
 #define CONFIG_SYS_OR4 ( OR_AM_MSK | OR_CSNT_SAM | OR_BI | OR_G5LS)
 #define CONFIG_SYS_BR4 ( (DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_UPMB | BR_V )
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_SCC1_ENET
 
 /* pass open firmware flat tree */
 
 #define CONFIG_SYS_GPIO0_TSRH          0x00000000
 #define CONFIG_SYS_GPIO0_TCR           0xF7FF8014
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
 
                                                  BR_V                                            \
                                                )
 
-/*
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02    /* Software reboot                                      */
-
 /*
  * FEC interrupt assignment
  */
 
                        MAMR_G0CLA_A11 | MAMR_RLFA_1X | MAMR_WLFA_1X \
                        | MAMR_TLFA_4X) /* 0x5d802114 */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD                   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM                  0x02            /* Software reboot                      */
-
 /* values according to the manual */
 
 #define CONFIG_DRAM_50MHZ              1
 
 #define CONFIG_SYS_LCD0_RST            (0x80000000 >> 30)
 #define CONFIG_SYS_LCD1_RST            (0x80000000 >> 31)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 /* values according to the manual */
 #define CONFIG_DRAM_50MHZ      1
 #define CONFIG_SDRAM_50MHZ
 
 #define CONFIG_SYS_UART4_RS232         (0x80000000 >> 7)
 #define CONFIG_SYS_UART5_RS232         (0x80000000 >> 8)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
 
                         MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_8X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #ifdef CONFIG_MPC860T
 
 /* Interrupt level assignments.
 
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
 #define CONFIG_SYS_MAMR                0x13a01114
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
 
 #ifdef CONFIG_MPC860T
 
 
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM          0x02    /* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 
 #define BD_CTRL_FLWE   0x20    /* Flash Write Enable                   */
 #define BD_CTRL_RWDN   0x10    /* VMEBus Requester Release When Done Enable */
 
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01      /* Normal Power-On: Boot from FLASH   */
-#define BOOTFLAG_WARM  0x02      /* Software reboot                    */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from flash     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 
                         MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |   \
                         MBMR_RLFB_1X    | MBMR_WLFB_1X    | MBMR_TLFB_4X)
 #endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
                         MBMR_RLFB_1X    | MBMR_WLFB_1X    | MBMR_TLFB_4X)
 
 #endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
 
 /* Configuration Port location */
 #define CONFIG_PORT_ADDR       0xF0000500
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD        0x01           /* Normal PowerOn: Boot from FLASH */
-#define BOOTFLAG_WARM        0x02           /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400        /* kgdb serial port baud   */
 #define CONFIG_KGDB_SER_INDEX 2                     /* kgdb serial port        */
 
 
 #define LATCH_ADDR 0x90000200
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-
 #define CONFIG_AUTOBOOT_KEYED          /* use key strings to stop autoboot */
 #define CONFIG_AUTOBOOT_STOP_STR       "."
 #define CONFIG_SILENT_CONSOLE          1
 
 
 #define LATCH_ADDR 0x90000200
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-
 #define CONFIG_AUTOBOOT_KEYED          /* use key strings to stop autoboot     */
 
 #define CONFIG_AUTOBOOT_STOP_STR       "."     /* easy to stop for now         */
 
                         MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * JFFS2 partitions
  *
 
  */
 #define CONFIG_SYS_DER 0
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
 #define CONFIG_SYS_MAMR                0x13821000
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD                   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM                  0x02            /* Software reboot                      */
-
 
 /* values according to the manual */
 
 
  */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD        0x01           /* Normal PowerOn: Boot from FLASH */
-#define BOOTFLAG_WARM        0x02           /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400        /* kgdb serial port baud   */
 #define CONFIG_KGDB_SER_INDEX 2                     /* kgdb serial port        */
 
  */
 #define CONFIG_SYS_DER 0
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 12)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-
 /***********************************************************************
  * External peripheral base address
  ***********************************************************************/
 
  */
 #define SPD_EEPROM_ADDRESS      0x50
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_CACHELINE_SIZE  16
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM           0x02    /* Software reboot                  */
-
 /* Localizations */
 #if 0
 #define CONFIG_ETHADDR          0:0:0:0:1:d
 
 #define CONFIG_SYS_HRCW_SLAVE6 0
 #define CONFIG_SYS_HRCW_SLAVE7 0
 
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM  0x02    /* Software reboot           */
-
 #define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
+
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT
 #endif
 
 #define CONFIG_SYS_HRCW_SLAVE6 0
 #define CONFIG_SYS_HRCW_SLAVE7 0
 
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM  0x02    /* Software reboot           */
-
 #define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
+
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT
 #endif
 
 #define CONFIG_SYS_DBAT3L      CONFIG_SYS_IBAT3L
 #define CONFIG_SYS_DBAT3U      CONFIG_SYS_IBAT3U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 /*
  * Environment Configuration
  */
 
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
 /*
  * Environment Configuration
  */
 
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
 #if (CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 #endif /* CONFIG_PCI */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot              */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)
                                        /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
     #define CONFIG_KGDB_BAUDRATE       230400  /* speed to run kgdb serial port */
     #define CONFIG_KGDB_SER_INDEX      2       /* which serial port to use */
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value        */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000
 
-#define BOOTFLAG_COLD          0x01
-#define BOOTFLAG_WARM          0x02
-
 #define CONFIG_MISC_INIT_R     1
 
 #define CONFIG_SYS_CACHELINE_SIZE      32
 
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
-
 /*
  * Environment Configuration
  */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CACHELINE_SHIFT     5       /* log base 2 of the above value        */
 #endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A7 |    \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000
 
-#define BOOTFLAG_COLD          0x01
-#define BOOTFLAG_WARM          0x02
-
 #define CONFIG_MISC_INIT_R     1
 
 #define CONFIG_SYS_CACHELINE_SIZE      32
 
 
 #define CONFIG_SYS_MBMR_NAND ( MBMR_WLFB_5X )
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_JFFS2_NAND 1                    /* jffs2 on nand support */
 #define NAND_CACHE_PAGES 16                    /* size of nand cache in 512 bytes pages */
 
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_LAST_STAGE_INIT         /* needed to reset the damn phys */
 
 /****************************************************************/
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_LAST_STAGE_INIT         /* needed to reset the damn phys */
 
 /***********************************************************************************************************
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_LAST_STAGE_INIT         /* needed to reset the damn phys */
 
 /****************************************************************/
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /* Ethernet at SCC2 */
 #define CONFIG_SCC2_ENET
 
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #undef CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot          */
-
 #define CONFIG_ENV_OVERWRITE   /* allow changes to ethaddr (for now)   */
 #define CONFIG_ETHADDR         00:10:20:30:40:50
 #define CONFIG_IPADDR          10.77.77.20
 
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 
 #define L2_ENABLE      (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                  */
-
 #define CONFIG_SYS_BOARD_ASM_INIT      1
 
 
 
  */
 #define CONFIG_SYS_DER                 0x00000000
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01                    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02                    /* Software reboot                      */
-
-
 #define VERSION_TAG "released"
 #define CONFIG_ISO_STRING "MEV-10084-001"
 
 
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
                   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 #define L2_ENABLE (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 /*-----------------------------------------------------------------------
   RTC m48t59
 */
 
                   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 #define L2_ENABLE (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 /*-----------------------------------------------------------------------
   RTC m48t59
 */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-
 /***********************************************************************
  * External peripheral base address
  ***********************************************************************/
 
 #define CONFIG_SYS_DUART_RST           (0x80000000 >> 14)
 #define CONFIG_SYS_EEPROM_WP           (0x80000000 >> 0)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 /*
  * Default speed selection (cpu_plb_opb_ebc) in MHz.
  * This value will be set if iic boot eprom is disabled.
 
 
 #define CONFIG_MISC_INIT_R
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
 
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM          0x02    /* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM          0x02    /* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
                                         CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
 
 
 #define CONFIG_SYS_NAND_SELECT_DEVICE  1 /* nand driver supports mutipl. chips */
 #define CONFIG_SYS_NAND_QUIET_TEST     1
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02    /* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_GPIO0_TSRH          0x00000000
 #define CONFIG_SYS_GPIO0_TCR           0xF7FF8014
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-
 #define CONFIG_NO_SERIAL_EEPROM
 
 /*--------------------------------------------------------------------*/
 
 #define CONFIG_SYS_OR7_PRELIM          0xFFF00000
 #define CONFIG_SYS_BR7_PRELIM          0xF0700000
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 /*
  * Sanity checks
  */
 
 #define CONFIG_SYS_OR7_PRELIM          0xFFF00000
 #define CONFIG_SYS_BR7_PRELIM          0xF0700000
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 /*
  * Sanity checks
  */
 
 /* #define CONFIG_SYS_OR7              0xFF000000 */
 /* #define CONFIG_SYS_BR7              0xE8000000 */
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 /*
  * Sanity checks
  */
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * JFFS2 partitions
  *
 
                         MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |   \
                         MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 /* Configuration variable added by yooth. */
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 
                         MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |   \
                         MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 /* Configuration variable added by yooth. */
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 
                        MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10)
 /* CONFIG_SYS_MAMR_9COL:0x20904000 @ 64MHz */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 /* Configuration variable added by yooth. */
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 
                           ORxG_SCY_5_CLK              |\
                           ORxG_TRLX)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM   0x02    /* Software reboot                   */
-
 #endif  /* __CONFIG_H */
 
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_HRCW_SLAVE6         0
 #define CONFIG_SYS_HRCW_SLAVE7         0
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                  */
-
 #define CONFIG_SYS_MALLOC_LEN          (4096 << 10)    /* Reserve 4 MB for malloc()    */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
 
  */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot              */
-
 #if defined(CONFIG_CMD_KGDB)
   #define CONFIG_KGDB_BAUDRATE 230400  /* speed to run kgdb serial port */
   #define CONFIG_KGDB_SER_INDEX        2       /* which serial port to use */
 
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM          0x02    /* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
 /*
  * Environment Configuration
  */
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
 
                         MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |   \
                         MBMR_RLFB_1X    | MBMR_WLFB_1X    | MBMR_TLFB_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define DUART_BR5_VALUE ((CONFIG_SYS_DUARTA_BASE & BR_BA_MSK ) | DUART_BR_VALUE)
 #define DUART_BR6_VALUE ((CONFIG_SYS_DUARTB_BASE & BR_BA_MSK ) | DUART_BR_VALUE)
 
-/**********************************************************
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_RESET_ON_PANIC          /* reset if system panic() */
 
 #define CONFIG_ENV_IS_IN_FLASH
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
-
 /* values according to the manual */
 
 #define CONFIG_DRAM_50MHZ      1
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
-
 /* values according to the manual */
 
 #define CONFIG_DRAM_50MHZ      1
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
 
                         MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * Network configuration
  */
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
 
 */
 #define FEC_INTERRUPT  SIU_LEVEL1      /* FEC interrupt */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*-----------------------------------------------------------------------
  * Debug Enable Register
  *-----------------------------------------------------------------------
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz         */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported                  */
 
 /*
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
 
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN          (512 << 10)     /* Reserve 512 kB for malloc()*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM          0x02    /* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 
 #define CONFIG_SYS_MONITOR_LEN         (192 << 10)     /* Reserve 192 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM          0x02    /* Software reboot                 */
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME                "SCC"
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME                "SCC"
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Power-On: Boot from FLASH    */
-#define BOOTFLAG_WARM  0x02            /* Software reboot              */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port*/
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use     */
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME                "SCC"
 
                         MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME                "SCC"
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_NET_MULTI
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_NET_MULTI
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 
                         MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME                "SCC"
 
                         MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * Network configuration
  */
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
 
 #define CONFIG_SYS_LCD1_RST            (0x80000000 >> 31)
 #define CONFIG_SYS_EEPROM_WP           (0x80000000 >> 0)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
 
 #define CONFIG_SYS_GPIO0_TSRH          0x00000000  /* 16 ... 31 */
 #define CONFIG_SYS_GPIO0_TCR           0xF7FE0014  /*  0 ... 31 */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
 
 #define CONFIG_SYS_MONITOR_LEN                 0x00020000
 #define CONFIG_SYS_MALLOC_LEN                  0x00020000
 
-/* boot flags */
-#define BOOTFLAG_COLD                  0x01    /* normal power-on */
-#define BOOTFLAG_WARM                  0x02    /* software reboot */
-
 /* cache configuration */
 #define CONFIG_SYS_CACHELINE_SIZE              32      /* for MPC8260 */
 #if defined(CONFIG_CMD_KGDB)
 
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02            /* Software reboot              */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use     */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02            /* Software reboot              */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use     */
 
 
 #define CONFIG_SYS_DUART_RST           (0x80000000 >> 14)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
 
  */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
-/*
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 /*
  * Environment Configuration
  */
 
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN   (16 << 20)      /* Increase max gunzip size */
 
-/*
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02            /* Software reboot */
-
 /*
  * Environment Configuration
  */
 
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN   (16 << 20)      /* Increase max gunzip size */
 
-/*
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02            /* Software reboot */
-
 /*
  * Environment Configuration
  */
 
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN   (16 << 20)      /* Increase max gunzip size */
 
-/*
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02            /* Software reboot */
-
 /*
  * Environment Configuration
  */
 
 #define CONFIG_SYS_MPC8220_CLKIN       30000000/* ... running at 30MHz */
 #define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot      */
-
 /*
  * Serial console configuration
  */
 
 #define CONFIG_SYS_HRCW_SLAVE6         0
 #define CONFIG_SYS_HRCW_SLAVE7         0
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                  */
-
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
+
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
 #endif
 
  */
 #define CONFIG_GT_I2C
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                  */
-
 #endif /* __CONFIG_H */
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
 
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 /*
  * Serial console configuration
  */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 
 #define CONFIG_HIGH_BATS               1       /* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD                  0x01
-#define BOOTFLAG_WARM                  0x02
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE           230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX          2       /* which serial port to use */
 
 #define CONFIG_ENV_SIZE                2048
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4       /* 16-byte page size    */
 #endif
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM          0x02    /* Software reboot                 */
-
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 /* values according to the manual */
 
 #define CONFIG_DRAM_50MHZ      1
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_BOARD_EARLY_INIT_R
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 #define CONFIG_SYS_HID0_INIT           HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL          HID0_ICE
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #define CONFIG_SYS_XLB_PIPELINING      1       /* enable transaction pipeling */
 
 /*
 
  */
 #define CONFIG_SYS_DER                 0x00000000
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01                    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02                    /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #endif
 
 #endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM  0x02            /* Software reboot              */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_OR3_PRELIM  ((~(CONFIG_SYS_CMA_CS3_SIZE-1)&OR_AM_MSK)|OR_BI|OR_SETA)
 
 #endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000        /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported    */
 
 /*
 
 #define CONFIG_SYS_I2C_PLL_ADDR        0x58    /* I2C address of AMIS FS6377-01 PLL */
 #define CONFIG_I2CFAST         1       /* enable "i2cfast" env. setting     */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- *
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #endif /* __CONFIG_H */
 
  */
 #define CONFIG_I2CFAST         1       /* enable "i2cfast" env. setting     */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- *
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #endif /* __CONFIG_H */
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
-
 /* values according to the manual */
 
 #define CONFIG_DRAM_50MHZ      1
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000
 
-#define BOOTFLAG_COLD          0x01
-#define BOOTFLAG_WARM          0x02
-
 #define CONFIG_SYS_CACHELINE_SIZE      32
 
 /*
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
 
-
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
-
 /* values according to the manual */
 #define CONFIG_DRAM_50MHZ      1
 #define CONFIG_SDRAM_50MHZ
 
 #define CONFIG_SYS_HRCW_SLAVE6         0
 #define CONFIG_SYS_HRCW_SLAVE7         0
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                  */
-
 #define CONFIG_SYS_MALLOC_LEN          (4096 << 10)    /* Reserve 4 MB for malloc()    */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
 
                           ORxG_SCY_10_CLK)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM   0x02    /* Software reboot                   */
-
 /*
  * JFFS2 partitions
  *
 
 #define CONFIG_SYS_HRCW_SLAVE6         0
 #define CONFIG_SYS_HRCW_SLAVE7         0
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                  */
-
 #define CONFIG_SYS_MALLOC_LEN          (4096 << 10)    /* Reserve 4 MB for malloc()    */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
 
 #define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU */
 #define CONFIG_MPC5200         1       /* (more precisely an MPC5200 CPU) */
 #define CONFIG_SYS_MPC5XXX_CLKIN 33333333      /* ... running at 33.333333MHz */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
 
 /*
  * Valid values for CONFIG_SYS_TEXT_BASE are:
 
                            ORxG_SCY_11_CLK            |\
                            ORxG_EHTR)
 #endif /* CONFIG_SYS_IO_BASE */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM   0x02    /* Software reboot           */
-
 #endif  /* __CONFIG_H */
 
 #define CONFIG_SYS_MAMR_9COL   ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz         */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 #define CONFIG_BOARD_EARLY_INIT_R
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported                  */
 
  */
 #define FPGA_MAIN_IRQ          SIU_INT_IRQ2
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM  0x02            /* Software reboot              */
-
 /*
  * JFFS2 partitions
  *
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz         */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 #define CONFIG_MISC_INIT_F     1       /* Use misc_init_f()                    */
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported                  */
 
 
 #define CONFIG_MISC_INIT_R
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #define CONFIG_SYS_CACHELINE_SIZE      32 /* For MPC5xxx CPUs */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_SYS_CACHELINE_SHIFT     5  /* log base 2 of the above value */
 
 #define CONFIG_BOARD_EARLY_INIT_R      1
 #define CONFIG_BOARD_EARLY_INIT_F      1
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
 
 #define CONFIG_SYS_BR3_PRELIM  (0x30000401)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot                  */
-
 #define CONFIG_SCC3_ENET
 #define CONFIG_ETHPRIME                "SCC"
 #define CONFIG_HAS_ETH0
 
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 #endif /* CONFIG_PCI */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 #define BOOTFLASH_START        F0000000
 
 #define CONFIG_PRAM    512     /* protected RAM [KBytes] */
 
 }                                                                                      \
 }
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02    /* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400 /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use     */
 
 #define CONFIG_SYS_DBAT3L      CONFIG_SYS_IBAT3L
 #define CONFIG_SYS_DBAT3U      CONFIG_SYS_IBAT3U
 
-#define BOOTFLAG_COLD  0x01
-#define BOOTFLAG_WARM  0x02
-
 #endif /* __CONFIG_H */
 
  */
 #define CONFIG_DOS_PARTITION
 
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
  */
 #define CONFIG_SYS_MAR         0x00000088
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 }                                                                                      \
 }
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2           /* which serial port to use */
 
  * (easy to change)
  */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /* Partitions */
 
 
 #define CONFIG_MISC_INIT_R
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported                  */
 
 /*
 
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
 
 #define CONFIG_SYS_HRCW_SLAVE6         0
 #define CONFIG_SYS_HRCW_SLAVE7         0
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                  */
-
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
 #define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC8260 CPUs */
 
 #define CONFIG_SYS_HID0_INIT           HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL          HID0_ICE
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs */
 
 
 
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 
 #define L2_INIT                0
 #define L2_ENABLE      (L2_INIT | L2CR_L2E)
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
 #define CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_DBAT3L      CONFIG_SYS_IBAT3L
 #define CONFIG_SYS_DBAT3U      CONFIG_SYS_IBAT3U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 /*
  * Environment Configuration
  */
 
 #define CONFIG_SYS_HRCW_SLAVE6         0
 #define CONFIG_SYS_HRCW_SLAVE7         0
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                  */
-
 #define CONFIG_SYS_MALLOC_LEN          (4096 << 10)    /* Reserve 4 MB for malloc()    */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
 
 #endif
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33333333 /* ... running at 33.333333MHz */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
 #define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs */
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
 
 
 #define L2_ENABLE      (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                  */
-
 #endif /* __CONFIG_H */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #endif
 
 #define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
 
 /*-----------------------------------------------------------------------------
 Serial console configuration
 
 }                                                                                      \
 }
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000        /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 /*
  * Serial console configuration
 
 
 #define CONFIG_SYS_BOARD_ASM_INIT
 
-
-/*
- * Boot flags
- *
- * BOOTFLAG_COLD               - Indicates a power-on boot
- * BOOTFLAG_WARM               - Indicates a software reset
- */
-
-#define BOOTFLAG_COLD          0x01
-#define BOOTFLAG_WARM          0x02
-
-
 #endif /* __CONFIG_H */
 
                         ORxG_TRLX                     |\
                         ORxG_EHTR)
 #endif /* CONFIG_SYS_LED_BASE */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM  0x02    /* Software reboot                   */
-
 #endif /* __CONFIG_H */
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02    /* Software reboot                      */
-
 /*
  * BCSRx
  *
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02    /* Software reboot                      */
-
 /*
  * BCSRx
  *
 
 #define CONFIG_SYS_OR5_PRELIM  (P2SZ_TO_AM(PHYS_DPRAM_SHARC_SIZE) | \
                         ORxG_ACS_DIV4)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
                           ORxG_EHTR)
 #endif /* (defined(CONFIG_SYS_FLASH1_BASE) && defined(CONFIG_SYS_FLASH1_SIZE)) */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM  0x02    /* Software reboot                   */
-
 #endif /* __CONFIG_H */
 
 #define SPD_EEPROM_ADDRESS     0x50
 #define CONFIG_SPD_EEPROM      1       /* use SPD EEPROM for setup             */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value        */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
 
                           ORxG_TRLX                   |\
                           ORxG_EHTR)
 #endif /* CONFIG_SYS_LED_BASE */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM  0x02    /* Software reboot                   */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot              */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_CACHELINE_SHIFT     5       /*log base 2 of the above value*/
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 /* Initial value of the stack pointern in internal SRAM */
 #define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /* ################################################################################### */
 /* These defines will be used in arch/powerpc/cpu/ppc4xx/cpu_init.c to setup external chip selects  */
 /* They are currently undefined cause they are initiaized in board/solidcard3/init.S   */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Power-On: Boot from FLASH    */
-#define BOOTFLAG_WARM  0x02            /* Software reboot              */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port*/
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use     */
 
 #define CONFIG_SYS_MPC8220_CLKIN       60000000 /* ... running at 60MHz */
 #define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 8 /* VCO multiplier can't be read from any register */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot      */
-
 /*
  * Serial console configuration
  */
 
 
 #define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
 
  */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot              */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
  */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot              */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_LAST_STAGE_INIT         /* needed to reset the damn phys */
 
 /****************************************************************/
 
 #define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 #define CONFIG_SYS_DOC_BASE 0x80000000
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10      /* takes up to 10 msec  */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define        CONFIG_FEC_ENET         1       /* use FEC ethernet  */
 #define FEC_ENET
 #define CONFIG_MII
 
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value        */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
-
 #endif /* __CONFIG_H */
 
                         MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |   \
                         MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */
 
 
 #define CONFIG_SYS_XLB_PIPELINING              1       /* gives better performance */
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
 
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
 #define CONFIG_NETDEV          eth0
 
 #define CONFIG_HOSTNAME                ve8313
 
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 /* Map peripheral control registers on CS4 */
 #define CONFIG_SYS_PERIPHERAL_BASE 0xA0000000
 #define CONFIG_SYS_PERIPHERAL_OR_AM 0xFFFF8000 /* 32 kB address mask */
 
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 
 #define CONFIG_SYS_TIME_POST           5000
 #define CONFIG_SYS_TIME_FACTORY_RESET  10000
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02            /* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */