]> git.sur5r.net Git - u-boot/commitdiff
ARMV7: OMAP: I2C driver: Restructure i2c_read_byte function
authorSteve Sakoman <steve@sakoman.com>
Wed, 20 Oct 2010 13:07:45 +0000 (06:07 -0700)
committerHeiko Schocher <hs@denx.de>
Wed, 20 Oct 2010 13:28:37 +0000 (15:28 +0200)
This patch removes the "magic number" delays and instead
monitors state changes in the status register bits.

Signed-off-by: Steve Sakoman <steve.sakomanlinaro.org>
Tested-by: Heiko Schocher <hs@denx.de>
drivers/i2c/omap24xx_i2c.c

index b69d0517509593a21537983f9348dab805eb5491..d176b5dd89ca0e2cbba0bee121a148685435b04f 100644 (file)
@@ -159,58 +159,56 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
        /* no stop bit needed here */
        writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, &i2c_base->con);
 
-       status = wait_for_pin ();
-
-       if (status & I2C_STAT_XRDY) {
-               /* Important: have to use byte access */
-               writeb (regoffset, &i2c_base->data);
-               udelay (20000);
-               if (readw (&i2c_base->stat) & I2C_STAT_NACK) {
+       /* send register offset */
+       while (1) {
+               status = wait_for_pin();
+               if (status == 0 || status & I2C_STAT_NACK) {
                        i2c_error = 1;
+                       goto read_exit;
+               }
+               if (status & I2C_STAT_XRDY) {
+                       /* Important: have to use byte access */
+                       writeb(regoffset, &i2c_base->data);
+                       writew(I2C_STAT_XRDY, &i2c_base->stat);
+               }
+               if (status & I2C_STAT_ARDY) {
+                       writew(I2C_STAT_ARDY, &i2c_base->stat);
+                       break;
                }
-       } else {
-               i2c_error = 1;
        }
 
-       if (!i2c_error) {
-               writew (I2C_CON_EN, &i2c_base->con);
-               while (readw(&i2c_base->stat) &
-                       (I2C_STAT_XRDY | I2C_STAT_ARDY)) {
-                       udelay (10000);
-                       /* Have to clear pending interrupt to clear I2C_STAT */
-                       writew (0xFFFF, &i2c_base->stat);
+       /* set slave address */
+       writew(devaddr, &i2c_base->sa);
+       /* read one byte from slave */
+       writew(1, &i2c_base->cnt);
+       /* need stop bit here */
+       writew(I2C_CON_EN | I2C_CON_MST |
+               I2C_CON_STT | I2C_CON_STP,
+               &i2c_base->con);
+
+       /* receive data */
+       while (1) {
+               status = wait_for_pin();
+               if (status == 0 || status & I2C_STAT_NACK) {
+                       i2c_error = 1;
+                       goto read_exit;
                }
-
-               /* set slave address */
-               writew (devaddr, &i2c_base->sa);
-               /* read one byte from slave */
-               writew (1, &i2c_base->cnt);
-               /* need stop bit here */
-               writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
-                       &i2c_base->con);
-
-               status = wait_for_pin ();
                if (status & I2C_STAT_RRDY) {
 #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
     defined(CONFIG_OMAP44XX)
-                       *value = readb (&i2c_base->data);
+                       *value = readb(&i2c_base->data);
 #else
-                       *value = readw (&i2c_base->data);
+                       *value = readw(&i2c_base->data);
 #endif
-                       udelay (20000);
-               } else {
-                       i2c_error = 1;
+                       writew(I2C_STAT_RRDY, &i2c_base->stat);
                }
-
-               if (!i2c_error) {
-                       writew (I2C_CON_EN, &i2c_base->con);
-                       while (readw (&i2c_base->stat) &
-                               (I2C_STAT_RRDY | I2C_STAT_ARDY)) {
-                               udelay (10000);
-                               writew (0xFFFF, &i2c_base->stat);
-                       }
+               if (status & I2C_STAT_ARDY) {
+                       writew(I2C_STAT_ARDY, &i2c_base->stat);
+                       break;
                }
        }
+
+read_exit:
        flush_fifo();
        writew (0xFFFF, &i2c_base->stat);
        writew (0, &i2c_base->cnt);