]> git.sur5r.net Git - u-boot/commitdiff
spi: cadence_qspi: Use #define for bits instead of bit shifts
authorPhil Edworthy <PHIL.EDWORTHY@renesas.com>
Tue, 29 Nov 2016 12:58:29 +0000 (12:58 +0000)
committerJagan Teki <jagan@amarulasolutions.com>
Thu, 15 Dec 2016 15:57:27 +0000 (16:57 +0100)
Most of the code already uses #defines for the bit value, rather
than the shift required to get the value. This changes the remaining
code over.

Whislt at it, fix the names of the "Rd Data Capture" register defs.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
drivers/spi/cadence_qspi_apb.c

index 0a2963de3561efed9ed12c62b0b78d96fa4e4471..b41f36b5d9fc8962f6496dd6bcdd73ec458debd3 100644 (file)
@@ -57,9 +57,9 @@
  * Controller's configuration and status register (offset from QSPI_BASE)
  ****************************************************************************/
 #define        CQSPI_REG_CONFIG                        0x00
-#define        CQSPI_REG_CONFIG_CLK_POL_LSB            1
-#define        CQSPI_REG_CONFIG_CLK_PHA_LSB            2
 #define        CQSPI_REG_CONFIG_ENABLE_MASK            BIT(0)
+#define        CQSPI_REG_CONFIG_CLK_POL                BIT(1)
+#define        CQSPI_REG_CONFIG_CLK_PHA                BIT(2)
 #define        CQSPI_REG_CONFIG_DIRECT_MASK            BIT(7)
 #define        CQSPI_REG_CONFIG_DECODE_MASK            BIT(9)
 #define        CQSPI_REG_CONFIG_XIP_IMM_MASK           BIT(18)
 #define        CQSPI_REG_DELAY_TSD2D_MASK              0xFF
 #define        CQSPI_REG_DELAY_TSHSL_MASK              0xFF
 
-#define        CQSPI_READLCAPTURE                      0x10
-#define        CQSPI_READLCAPTURE_BYPASS_LSB           0
-#define        CQSPI_READLCAPTURE_DELAY_LSB            1
-#define        CQSPI_READLCAPTURE_DELAY_MASK           0xF
+#define        CQSPI_REG_RD_DATA_CAPTURE               0x10
+#define        CQSPI_REG_RD_DATA_CAPTURE_BYPASS        BIT(0)
+#define        CQSPI_REG_RD_DATA_CAPTURE_DELAY_LSB     1
+#define        CQSPI_REG_RD_DATA_CAPTURE_DELAY_MASK    0xF
 
 #define        CQSPI_REG_SIZE                          0x14
 #define        CQSPI_REG_SIZE_ADDRESS_LSB              0
@@ -244,20 +244,20 @@ void cadence_qspi_apb_readdata_capture(void *reg_base,
        unsigned int reg;
        cadence_qspi_apb_controller_disable(reg_base);
 
-       reg = readl(reg_base + CQSPI_READLCAPTURE);
+       reg = readl(reg_base + CQSPI_REG_RD_DATA_CAPTURE);
 
        if (bypass)
-               reg |= (1 << CQSPI_READLCAPTURE_BYPASS_LSB);
+               reg |= CQSPI_REG_RD_DATA_CAPTURE_BYPASS;
        else
-               reg &= ~(1 << CQSPI_READLCAPTURE_BYPASS_LSB);
+               reg &= ~CQSPI_REG_RD_DATA_CAPTURE_BYPASS;
 
-       reg &= ~(CQSPI_READLCAPTURE_DELAY_MASK
-               << CQSPI_READLCAPTURE_DELAY_LSB);
+       reg &= ~(CQSPI_REG_RD_DATA_CAPTURE_DELAY_MASK
+               << CQSPI_REG_RD_DATA_CAPTURE_DELAY_LSB);
 
-       reg |= ((delay & CQSPI_READLCAPTURE_DELAY_MASK)
-               << CQSPI_READLCAPTURE_DELAY_LSB);
+       reg |= (delay & CQSPI_REG_RD_DATA_CAPTURE_DELAY_MASK)
+               << CQSPI_REG_RD_DATA_CAPTURE_DELAY_LSB;
 
-       writel(reg, reg_base + CQSPI_READLCAPTURE);
+       writel(reg, reg_base + CQSPI_REG_RD_DATA_CAPTURE);
 
        cadence_qspi_apb_controller_enable(reg_base);
        return;
@@ -301,11 +301,12 @@ void cadence_qspi_apb_set_clk_mode(void *reg_base,
 
        cadence_qspi_apb_controller_disable(reg_base);
        reg = readl(reg_base + CQSPI_REG_CONFIG);
-       reg &= ~(1 << CQSPI_REG_CONFIG_CLK_POL_LSB);
-       reg &= ~(1 << CQSPI_REG_CONFIG_CLK_PHA_LSB);
+       reg &= ~(CQSPI_REG_CONFIG_CLK_POL | CQSPI_REG_CONFIG_CLK_PHA);
 
-       reg |= ((clk_pol & 0x1) << CQSPI_REG_CONFIG_CLK_POL_LSB);
-       reg |= ((clk_pha & 0x1) << CQSPI_REG_CONFIG_CLK_PHA_LSB);
+       if (clk_pol)
+               reg |= CQSPI_REG_CONFIG_CLK_POL;
+       if (clk_pha)
+               reg |= CQSPI_REG_CONFIG_CLK_PHA;
 
        writel(reg, reg_base + CQSPI_REG_CONFIG);