]> git.sur5r.net Git - u-boot/commitdiff
arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
authorHeiko Schocher <hs@denx.de>
Tue, 15 Nov 2011 15:00:04 +0000 (10:00 -0500)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Tue, 15 Nov 2011 21:25:51 +0000 (22:25 +0100)
since commits:
davinci: emac: add support for more than 1 PHYs
062fe7d332c28ede25626f448681e43d76bb312e

davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
fb1d6332b5430b90a8fa8ebab709f33a60e9f816

I get following warning on the enbw_cmc board:

Err:   serial
Net:    5 ETH PHY detected
miiphy_register: non unique device name 'KSZ8873 @ 0x01'
DaVinci-EMAC
Hit any key to stop autoboot:  0

Also I see some debug printfs:

=> run load
+ emac_close
+ emac_ch_teardown
- emac_ch_teardown
+ emac_ch_teardown
- emac_ch_teardown
- emac_close
+ emac_open
- emac_open
Using DaVinci-EMAC device

reason is 062fe7d332c28ede25626f448681e43d76bb312e new define MAX_PHY.
This is set to 3! I get on this board 5 active phys, so
this leads in wrong memory writes ...

so I changed:

- define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT to set
  the MAX_PHY value, add a description in README
  for the new CONFIG_SYS option.
- print an error message if more then MAX_PHYs are
  detected.
- fill the active_phy_addr array in a for loop with
  0xff
- changed printf() in debug_emac()

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Manjunath Hadli <manjunath.hadli@ti.com>
Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Tom Rini <tom.rini@gmail.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
README
drivers/net/davinci_emac.c

diff --git a/README b/README
index 73ca042f68c33627a3e109b623401d08ed958e85..07f1d11e5feb2565df5422f3ccf940f1174a747d 100644 (file)
--- a/README
+++ b/README
@@ -1027,6 +1027,12 @@ The following options need to be configured:
                        Define this to use i/o functions instead of macros
                        (some hardware wont work with macros)
 
+               CONFIG_DRIVER_TI_EMAC
+               Support for davinci emac
+
+                       CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
+                       Define this if you have more then 3 PHYs.
+
                CONFIG_FTGMAC100
                Support for Faraday's FTGMAC100 Gigabit SoC Ethernet
 
index fa31159a0efc9115ce378ab5e67b67c8fb8ac8be..36c33af66209b0c890b2617193e1c20f9459b729 100644 (file)
@@ -85,15 +85,17 @@ static int                  emac_rx_queue_active = 0;
 /* Receive packet buffers */
 static unsigned char           emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
 
-#define MAX_PHY                3
+#ifndef CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
+#define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT      3
+#endif
 
 /* PHY address for a discovered PHY (0xff - not found) */
-static u_int8_t        active_phy_addr[MAX_PHY] = { 0xff, 0xff, 0xff };
+static u_int8_t        active_phy_addr[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
 
 /* number of PHY found active */
 static u_int8_t        num_phy;
 
-phy_t                          phy[MAX_PHY];
+phy_t                          phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
 
 static int davinci_eth_set_mac_addr(struct eth_device *dev)
 {
@@ -160,9 +162,8 @@ static int davinci_eth_phy_detect(void)
        int             j;
        unsigned int    count = 0;
 
-       active_phy_addr[0] = 0xff;
-       active_phy_addr[1] = 0xff;
-       active_phy_addr[2] = 0xff;
+       for (i = 0; i < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT; i++)
+               active_phy_addr[i] = 0xff;
 
        udelay(1000);
        phy_act_state = readl(&adap_mdio->ALIVE);
@@ -175,7 +176,14 @@ static int davinci_eth_phy_detect(void)
        for (i = 0, j = 0; i < 32; i++)
                if (phy_act_state & (1 << i)) {
                        count++;
-                       active_phy_addr[j++] = i;
+                       if (count < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT) {
+                               active_phy_addr[j++] = i;
+                       } else {
+                               printf("%s: to many PHYs detected.\n",
+                                       __func__);
+                               count = 0;
+                               break;
+                       }
                }
 
        num_phy = count;
@@ -752,7 +760,7 @@ int davinci_emac_initialize(void)
        if (!ret)
                return(0);
        else
-               printf(" %d ETH PHY detected\n", ret);
+               debug_emac(" %d ETH PHY detected\n", ret);
 
        /* Get PHY ID and initialize phy_ops for a detected PHY */
        for (i = 0; i < num_phy; i++) {