]> git.sur5r.net Git - u-boot/commitdiff
sunxi: H3: Add support for the host usb-phys
authorJelle van der Waa <jelle@vdwaa.nl>
Tue, 9 Feb 2016 22:59:33 +0000 (23:59 +0100)
committerHans de Goede <hdegoede@redhat.com>
Tue, 23 Feb 2016 19:59:10 +0000 (20:59 +0100)
Add support for phy 1-3.

Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
[hdegoede@redhat.com: use setclrbits_le32 instead of read-modify-write]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
arch/arm/cpu/armv7/sunxi/usb_phy.c
arch/arm/include/asm/arch-sunxi/clock_sun6i.h
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
configs/orangepi_pc_defconfig
configs/orangepi_plus_defconfig
drivers/usb/host/ehci-sunxi.c
drivers/usb/host/ohci-sunxi.c
include/configs/sun8i.h

index 19bb5a1fe5d52a61b47aa0479a1ffbd54ea89da6..6ac96ccf86269283d16138748336a5b4dd2b8ad8 100644 (file)
@@ -31,6 +31,9 @@
 #define SUNXI_EHCI_AHB_INCRX_ALIGN_EN  (1 << 8)
 #define SUNXI_EHCI_ULPI_BYPASS_EN      (1 << 0)
 
+#define REG_PHY_UNK_H3                 0x420
+#define REG_PMU_UNK_H3                 0x810
+
 static struct sunxi_usb_phy {
        int usb_rst_mask;
        int gpio_vbus;
@@ -39,19 +42,30 @@ static struct sunxi_usb_phy {
        int id;
        int init_count;
        int power_on_count;
+       int base;
 } sunxi_usb_phy[] = {
        {
                .usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
                .id = 0,
+               .base = SUNXI_USB0_BASE,
        },
        {
                .usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
                .id = 1,
+               .base = SUNXI_USB1_BASE,
        },
 #if CONFIG_SUNXI_USB_PHYS >= 3
        {
                .usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
                .id = 2,
+               .base = SUNXI_USB2_BASE,
+       },
+#endif
+#if CONFIG_SUNXI_USB_PHYS >= 4
+       {
+               .usb_rst_mask = CCM_USB_CTRL_PHY3_RST | CCM_USB_CTRL_PHY3_CLK,
+               .id = 3,
+               .base = SUNXI_USB3_BASE,
        }
 #endif
 };
@@ -114,6 +128,15 @@ static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
        }
 }
 
+#if defined CONFIG_MACH_SUN8I_H3
+static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
+{
+       if (phy->id == 0)
+               clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
+
+       clrbits_le32(phy->base + REG_PMU_UNK_H3, 0x02);
+}
+#else
 static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
 {
        /* The following comments are machine
@@ -136,16 +159,14 @@ static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
 
        return;
 }
+#endif
 
-static void sunxi_usb_phy_passby(int index, int enable)
+static void sunxi_usb_phy_passby(struct sunxi_usb_phy *phy, int enable)
 {
        unsigned long bits = 0;
        void *addr;
 
-       if (index == 1)
-               addr = (void *)SUNXI_USB1_BASE + SUNXI_USB_PMU_IRQ_ENABLE;
-       else
-               addr = (void *)SUNXI_USB2_BASE + SUNXI_USB_PMU_IRQ_ENABLE;
+       addr = (void *)phy->base + SUNXI_USB_PMU_IRQ_ENABLE;
 
        bits = SUNXI_EHCI_AHB_ICHR8_EN |
                SUNXI_EHCI_AHB_INCR4_BURST_EN |
@@ -181,7 +202,7 @@ void sunxi_usb_phy_init(int index)
        sunxi_usb_phy_config(phy);
 
        if (phy->id != 0)
-               sunxi_usb_phy_passby(index, SUNXI_USB_PASSBY_EN);
+               sunxi_usb_phy_passby(phy, SUNXI_USB_PASSBY_EN);
 }
 
 void sunxi_usb_phy_exit(int index)
@@ -194,7 +215,7 @@ void sunxi_usb_phy_exit(int index)
                return;
 
        if (phy->id != 0)
-               sunxi_usb_phy_passby(index, !SUNXI_USB_PASSBY_EN);
+               sunxi_usb_phy_passby(phy, !SUNXI_USB_PASSBY_EN);
 
        clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
 }
index 554d8589ed55d7cd0c475a191e62fe14dd96b8a3..9de7754bb03823292fe7d24688c3af7f81fd24c0 100644 (file)
@@ -229,8 +229,18 @@ struct sunxi_ccm_reg {
 /* ahb_gate0 offsets */
 #define AHB_GATE_OFFSET_USB_OHCI1      30
 #define AHB_GATE_OFFSET_USB_OHCI0      29
+#ifdef CONFIG_MACH_SUN8I_H3
+/*
+ * These are EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG) we call
+ * them 0 - 2 like they were called on older SoCs.
+ */
+#define AHB_GATE_OFFSET_USB_EHCI2      27
+#define AHB_GATE_OFFSET_USB_EHCI1      26
+#define AHB_GATE_OFFSET_USB_EHCI0      25
+#else
 #define AHB_GATE_OFFSET_USB_EHCI1      27
 #define AHB_GATE_OFFSET_USB_EHCI0      26
+#endif
 #define AHB_GATE_OFFSET_USB0           24
 #define AHB_GATE_OFFSET_MCTL           14
 #define AHB_GATE_OFFSET_GMAC           17
@@ -263,13 +273,25 @@ struct sunxi_ccm_reg {
 #define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
 #define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
 #define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
+#define CCM_USB_CTRL_PHY3_RST (0x1 << 3)
 /* There is no global phy clk gate on sun6i, define as 0 */
 #define CCM_USB_CTRL_PHYGATE 0
 #define CCM_USB_CTRL_PHY0_CLK (0x1 << 8)
 #define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
 #define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
+#define CCM_USB_CTRL_PHY3_CLK (0x1 << 11)
+#ifdef CONFIG_MACH_SUN8I_H3
+/*
+ * These are OHCI1 - OHCI3 in the datasheet (OHCI0 is for the OTG) we call
+ * them 0 - 2 like they were called on older SoCs.
+ */
+#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 17)
+#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 18)
+#define CCM_USB_CTRL_OHCI2_CLK (0x1 << 19)
+#else
 #define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
 #define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17)
+#endif
 
 #define CCM_GMAC_CTRL_TX_CLK_SRC_MII   0x0
 #define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
index 0cdefdcdf4a66cafe5a174254c9d35c37baacc17..b6e11eb8ea6c9948620723646196fb119c139932 100644 (file)
 #define SUNXI_USB2_BASE                        0x01c1c000
 #endif
 #ifdef CONFIG_SUNXI_GEN_SUN6I
+#ifdef CONFIG_MACH_SUN8I_H3
+#define SUNXI_USBPHY_BASE              0x01c19000
+#define SUNXI_USB0_BASE                        0x01c1a000
+#define SUNXI_USB1_BASE                        0x01c1b000
+#define SUNXI_USB2_BASE                        0x01c1c000
+#define SUNXI_USB3_BASE                        0x01c1d000
+#else
 #define SUNXI_USB0_BASE                        0x01c19000
 #define SUNXI_USB1_BASE                        0x01c1a000
 #define SUNXI_USB2_BASE                        0x01c1b000
 #endif
+#endif
 #define SUNXI_CSI1_BASE                        0x01c1d000
 #define SUNXI_TZASC_BASE               0x01c1e000
 #define SUNXI_SPI3_BASE                        0x01c1f000
index 29a8da6661a11f7c58bd0892b1cac49ab983b0d6..aaf0f68c354fa93cab015b0bbf3558848ce29f4e 100644 (file)
@@ -13,3 +13,4 @@ CONFIG_SPL=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 CONFIG_SY8106A_POWER=y
+CONFIG_USB_EHCI_HCD=y
index d65b828606392060f54dcb7d8293e4b830bac523..e52dcfc718d5b5cb6ce4a8f4f92b6a153767e400 100644 (file)
@@ -13,3 +13,4 @@ CONFIG_SPL=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 CONFIG_SY8106A_POWER=y
+CONFIG_USB_EHCI_HCD=y
index d494ca10bb1c7d8b9c42e896e114301b4be67d7f..cf3dcc43274fb26957712c092ac12e635d7aed5d 100644 (file)
@@ -35,13 +35,12 @@ static int ehci_usb_probe(struct udevice *dev)
         * This should go away once we've moved to the driver model for
         * clocks resp. phys.
         */
-       if (hccr == (void *)SUNXI_USB1_BASE) {
-               priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
-               priv->phy_index = 1;
-       } else {
-               priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1;
-               priv->phy_index = 2;
-       }
+       priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
+#ifdef CONFIG_MACH_SUN8I_H3
+       priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_OHCI0;
+#endif
+       priv->phy_index = ((u32)hccr - SUNXI_USB1_BASE) / 0x1000 + 1;
+       priv->ahb_gate_mask <<= priv->phy_index - 1;
 
        setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
 #ifdef CONFIG_SUNXI_GEN_SUN6I
@@ -83,6 +82,7 @@ static const struct udevice_id ehci_usb_ids[] = {
        { .compatible = "allwinner,sun6i-a31-ehci", },
        { .compatible = "allwinner,sun7i-a20-ehci", },
        { .compatible = "allwinner,sun8i-a23-ehci", },
+       { .compatible = "allwinner,sun8i-h3-ehci",  },
        { .compatible = "allwinner,sun9i-a80-ehci", },
        { }
 };
index 60792726ee386c64e31cc6d104ae6030b7e6acbe..1b1f651697836c7f0a693c20144e8338b51f783c 100644 (file)
@@ -37,15 +37,14 @@ static int ohci_usb_probe(struct udevice *dev)
         * This should go away once we've moved to the driver model for
         * clocks resp. phys.
         */
-       if (regs == (void *)(SUNXI_USB1_BASE + 0x400)) {
-               priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0;
-               priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;
-               priv->phy_index = 1;
-       } else {
-               priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI1;
-               priv->usb_gate_mask = CCM_USB_CTRL_OHCI1_CLK;
-               priv->phy_index = 2;
-       }
+       priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0;
+#ifdef CONFIG_MACH_SUN8I_H3
+       priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_EHCI0;
+#endif
+       priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;
+       priv->phy_index = ((u32)regs - (SUNXI_USB1_BASE + 0x400)) / 0x1000 + 1;
+       priv->ahb_gate_mask <<= priv->phy_index - 1;
+       priv->usb_gate_mask <<= priv->phy_index - 1;
 
        setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
        setbits_le32(&ccm->usb_clk_cfg, priv->usb_gate_mask);
@@ -86,6 +85,7 @@ static const struct udevice_id ohci_usb_ids[] = {
        { .compatible = "allwinner,sun6i-a31-ohci", },
        { .compatible = "allwinner,sun7i-a20-ohci", },
        { .compatible = "allwinner,sun8i-a23-ohci", },
+       { .compatible = "allwinner,sun8i-h3-ohci",  },
        { .compatible = "allwinner,sun9i-a80-ohci", },
        { }
 };
index 781ff6eae213b9f15bd2b3a11af800bc748f2eb8..7c0ab1eab4b2278d8e884e293e85021d9abb4aae 100644 (file)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
 #endif
 
-#define CONFIG_SUNXI_USB_PHYS  2
+#ifdef CONFIG_MACH_SUN8I_H3
+       #define CONFIG_SUNXI_USB_PHYS   4
+#else
+       #define CONFIG_SUNXI_USB_PHYS   2
+#endif
 
 
 #ifndef CONFIG_MACH_SUN8I_A83T