]> git.sur5r.net Git - u-boot/commitdiff
mpc832x: add support for mpc8321 based tuda1 board
authorHeiko Schocher <hs@denx.de>
Thu, 1 Apr 2010 10:10:30 +0000 (12:10 +0200)
committerWolfgang Denk <wd@denx.de>
Fri, 29 Apr 2011 22:44:37 +0000 (00:44 +0200)
This board is similar to suvd3 board. So most initialisation topics
are taken from suvd3 (UART1, Ethernet, piggy PHY, flash, ram) only the
application specific chip selects differ.

Signed-off-by: Lukas Roggli <lukas.roggli@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
cc: Kim Phillips <kim.phillips@freescale.com>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>

MAINTAINERS
boards.cfg
include/configs/tuda1.h [new file with mode: 0644]

index d837af44d67cec3e87c079eddaa95b517fdadfdf..67daee65df5aea911cda7ffcf63df2390bad8255 100644 (file)
@@ -434,6 +434,7 @@ Heiko Schocher <hs@denx.de>
        sc3             PPC405GP
        suen3           ARM926EJS (Kirkwood SoC)
        suvd3           MPC8321
+       tuda1           MPC8321
        tuxa1           MPC8321
        uc101           MPC5200
        ve8313          MPC8313
index 4e34ab47255dc2cdd0761afd921c83e4f47729f6..d8aa19e2853673bda891acb029f8215133ddc483 100644 (file)
@@ -492,6 +492,7 @@ SIMPC8313_LP                 powerpc     mpc83xx     simpc8313           sheldon
 SIMPC8313_SP                 powerpc     mpc83xx     simpc8313           sheldon        -           SIMPC8313:NAND_SP
 suvd3                        powerpc     mpc83xx     km83xx              keymile
 TQM834x                      powerpc     mpc83xx     tqm834x             tqc
+tuda1                        powerpc     mpc83xx     km83xx              keymile
 tuxa1                        powerpc     mpc83xx     km83xx              keymile
 sbc8540                      powerpc     mpc85xx     sbc8560             -              -           SBC8540
 sbc8540_33                   powerpc     mpc85xx     sbc8560             -              -           SBC8540
diff --git a/include/configs/tuda1.h b/include/configs/tuda1.h
new file mode 100644 (file)
index 0000000..7ada9d5
--- /dev/null
@@ -0,0 +1,248 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *                    Dave Liu <daveliu@freescale.com>
+ *
+ * Copyright (C) 2007 Logic Product Development, Inc.
+ *                    Peter Barada <peterb@logicpd.com>
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *                    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * (C) Copyright 2010-2011
+ * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_QE              /* Has QE */
+#define CONFIG_MPC832x         /* MPC832x CPU specific */
+#define CONFIG_TUDA1           /* TUDA1 board specific */
+#define CONFIG_HOSTNAME                tuda1
+#define CONFIG_KM_BOARD_NAME   "tuda1"
+
+#define        CONFIG_SYS_TEXT_BASE    0xF0000000
+#define CONFIG_KM_DEF_NETDEV   \
+       "netdev=eth0\0"
+
+#define CONFIG_KM_DEF_ROOTPATH         \
+       "rootpath=/opt/eldk/ppc_8xx\0"
+
+/* include common defines/options for all 83xx Keymile boards */
+#include "km83xx-common.h"
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * System IO Config
+ */
+#define CONFIG_SYS_SICRL       SICRL_IRQ_CKS
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+       HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \
+       HRCWL_DDR_TO_SCB_CLK_2X1 | \
+       HRCWL_CSB_TO_CLKIN_2X1 | \
+       HRCWL_CORE_TO_CSB_2_5X1 | \
+       HRCWL_CE_PLL_VCO_DIV_2 | \
+       HRCWL_CE_TO_PLL_1X3)
+
+#define CONFIG_SYS_HRCW_HIGH (\
+       HRCWH_PCI_AGENT | \
+       HRCWH_PCI_ARBITER_DISABLE | \
+       HRCWH_CORE_ENABLE | \
+       HRCWH_FROM_0X00000100 | \
+       HRCWH_BOOTSEQ_DISABLE | \
+       HRCWH_SW_WATCHDOG_DISABLE | \
+       HRCWH_ROM_LOC_LOCAL_16BIT | \
+       HRCWH_BIG_ENDIAN | \
+       HRCWH_LALE_NORMAL)
+
+#define CONFIG_SYS_DDR_CS0_BNDS                0x0000007f
+#define CONFIG_SYS_DDR_SDRAM_CFG       (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
+                                        SDRAM_CFG_32_BE | \
+                                        SDRAM_CFG_2T_EN | \
+                                        SDRAM_CFG_SREN)
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2      0x00401000
+#define CONFIG_SYS_DDR_CLK_CNTL                (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#define CONFIG_SYS_DDR_INTERVAL        ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+                                (0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
+
+#define CONFIG_SYS_DDR_CS0_CONFIG      (CSCONFIG_EN | CSCONFIG_AP | \
+                                        CSCONFIG_ODT_WR_CFG | \
+                                        CSCONFIG_ROW_BIT_13 | \
+                                        CSCONFIG_COL_BIT_10)
+
+#define CONFIG_SYS_DDR_MODE    0x47860252
+#define CONFIG_SYS_DDR_MODE2   0x8080c000
+
+#define CONFIG_SYS_DDR_TIMING_0        ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+                                (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+                                (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+                                (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+                                (0 << TIMING_CFG0_WWT_SHIFT) | \
+                                (0 << TIMING_CFG0_RRT_SHIFT) | \
+                                (0 << TIMING_CFG0_WRT_SHIFT) | \
+                                (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_1        ((TIMING_CFG1_CASLAT_50) | \
+                                (2 << TIMING_CFG1_WRTORD_SHIFT) | \
+                                (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+                                (2 << TIMING_CFG1_WRREC_SHIFT) | \
+                                (6 << TIMING_CFG1_REFREC_SHIFT) | \
+                                (2 << TIMING_CFG1_ACTTORW_SHIFT) | \
+                                (6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+                                (2 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_2        ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+                                (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+                                (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+                                (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+                                (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+                                (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
+                                (5 << TIMING_CFG2_CPO_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_3        0x00000000
+
+
+#define CONFIG_SYS_PIGGY_BASE  0xE8000000
+#define        CONFIG_SYS_PIGGY_SIZE   128
+#define CONFIG_SYS_APP1_BASE   0xA0000000    /* PAXG */
+#define        CONFIG_SYS_APP1_SIZE    256 /* Megabytes */
+#define CONFIG_SYS_APP2_BASE   0xB0000000    /* PINC3 */
+#define        CONFIG_SYS_APP2_SIZE    256 /* Megabytes */
+
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR                (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LBC_LBCR    0x00000000
+
+/*
+ * Init Local Bus Memory Controller:
+ *
+ * Bank Bus     Machine PortSz  Size  Device
+ * ---- ---     ------- ------  -----  ------
+ *  2   Local   GPCM    8 bit  256MB   PAXG
+ *  3   Local   GPCM    8 bit  256MB   PINC3
+ *
+ */
+
+/*
+ * PAXG on the local bus CS2
+ */
+/* Window base at flash base */
+#define CONFIG_SYS_LBLAWBAR2_PRELIM    CONFIG_SYS_APP1_BASE
+/* Window size: 256 MB */
+#define CONFIG_SYS_LBLAWAR2_PRELIM     (LBLAWAR_EN | LBLAWAR_256MB)
+
+#define CONFIG_SYS_BR2_PRELIM  (CONFIG_SYS_APP1_BASE | \
+                                BR_PS_8 | \
+                                BR_MS_GPCM | \
+                                BR_V)
+
+#define CONFIG_SYS_OR2_PRELIM  (MEG_TO_AM(CONFIG_SYS_APP1_SIZE) | \
+                                OR_GPCM_CSNT | \
+                                OR_GPCM_ACS_DIV4 | \
+                                OR_GPCM_SCY_2 | \
+                                (OR_GPCM_TRLX & \
+                                (~OR_GPCM_EHTR)) |  /* EHTR = 0 */ \
+                                OR_GPCM_EAD)
+/*
+ * PINC3 on the local bus CS3
+ */
+/* Access window base at PINC3 base */
+#define CONFIG_SYS_LBLAWBAR3_PRELIM    CONFIG_SYS_APP2_BASE
+/* Window size: 256 MB */
+#define CONFIG_SYS_LBLAWAR3_PRELIM     (LBLAWAR_EN | LBLAWAR_256MB)
+
+#define CONFIG_SYS_BR3_PRELIM  (CONFIG_SYS_APP2_BASE | \
+                                BR_PS_8 |              \
+                                BR_MS_GPCM |           \
+                                BR_V)
+
+#define CONFIG_SYS_OR3_PRELIM  (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+                                OR_GPCM_CSNT | \
+                                (OR_GPCM_ACS_DIV2 & /* ACS = 11 */\
+                                (~OR_GPCM_XACS)) |  /* XACS = 0 */\
+                                (OR_GPCM_SCY_2 & \
+                                (~OR_GPCM_EHTR)) |  /* EHTR = 0 */ \
+                                OR_GPCM_TRLX)
+
+#define CONFIG_SYS_MAMR                (MxMR_GPL_x4DIS | \
+                                0x0000c000 | \
+                                MxMR_WLFx_2X)
+
+/*
+ * MMU Setup
+ */
+/* PAXG:  icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT5L      (CONFIG_SYS_APP1_BASE | \
+                                BATL_PP_10 | \
+                                BATL_MEMCOHERENCE)
+/* 512M should also include APP2... */
+#define CONFIG_SYS_IBAT5U      (CONFIG_SYS_APP1_BASE | \
+                                BATU_BL_256M | \
+                                BATU_VS | \
+                                BATU_VP)
+#define CONFIG_SYS_DBAT5L      (CONFIG_SYS_APP1_BASE | \
+                                BATL_PP_10 | \
+                                BATL_CACHEINHIBIT | \
+                                BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT5U      CONFIG_SYS_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L     (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U     (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L     CFG_IBAT6L
+#define CFG_DBAT6U     CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L     (CFG_PCI1_MMIO_PHYS | \
+                        BATL_PP_10 | \
+                        BATL_CACHEINHIBIT | \
+                        BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U     (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L     CFG_IBAT7L
+#define CFG_DBAT7U     CFG_IBAT7U
+#else /* CONFIG_PCI */
+
+/* PINC3:  icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT6L      (CONFIG_SYS_APP2_BASE | \
+                                BATL_PP_10 | \
+                                BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U      (CONFIG_SYS_APP2_BASE | \
+                                BATU_BL_256M | \
+                                BATU_VS | \
+                                BATU_VP)
+#define CONFIG_SYS_DBAT6L      (CONFIG_SYS_APP2_BASE | \
+                                BATL_PP_10 | \
+                                BATL_CACHEINHIBIT | \
+                                BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U      CONFIG_SYS_IBAT6U
+
+#define CONFIG_SYS_IBAT7L      (0)
+#define CONFIG_SYS_IBAT7U      (0)
+#define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
+#endif /* CONFIG_PCI */
+
+#endif /* __CONFIG_H */