/* CONTROL_EFUSE_2 */
#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
-#define MMC1_PWRDNZ (1 << 26)
-#define MMC1_PBIASLITE_PWRDNZ (1 << 22)
-#define MMC1_PBIASLITE_VMODE (1 << 21)
+#define SDCARD_PWRDNZ (1 << 26)
+#define SDCARD_BIAS_HIZ_MODE (1 << 25)
+#define SDCARD_BIAS_PWRDNZ (1 << 22)
+#define SDCARD_PBIASLITE_VMODE (1 << 21)
#ifndef __ASSEMBLY__
#include <i2c.h>
#include <twl4030.h>
#include <twl6030.h>
+#include <twl6035.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
}
#endif
+#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER)
+static void omap5_pbias_config(struct mmc *mmc)
+{
+ u32 value = 0;
+ struct omap_sys_ctrl_regs *const ctrl =
+ (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
+
+ value = readl(&ctrl->control_pbias);
+ value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
+ value |= SDCARD_BIAS_HIZ_MODE;
+ writel(value, &ctrl->control_pbias);
+
+ twl6035_mmc1_poweron_ldo();
+
+ value = readl(&ctrl->control_pbias);
+ value &= ~SDCARD_BIAS_HIZ_MODE;
+ value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ;
+ writel(value, &ctrl->control_pbias);
+
+ value = readl(&ctrl->control_pbias);
+ if (value & (1 << 23)) {
+ value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
+ value |= SDCARD_BIAS_HIZ_MODE;
+ writel(value, &ctrl->control_pbias);
+ }
+}
+#endif
+
unsigned char mmc_board_init(struct mmc *mmc)
{
#if defined(CONFIG_TWL4030_POWER)
if (mmc->block_dev.dev == 0)
omap4_vmmc_pbias_config(mmc);
#endif
+#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER)
+ if (mmc->block_dev.dev == 0)
+ omap5_pbias_config(mmc);
+#endif
return 0;
}
return i2c_read(chip_no, reg, 1, val, 1);
}
+/* To align with i2c mw/mr address, reg, val command syntax */
+static inline int palmas_write_u8(u8 chip_no, u8 reg, u8 val)
+{
+ return i2c_write(chip_no, reg, 1, &val, 1);
+}
+
+static inline int palmas_read_u8(u8 chip_no, u8 reg, u8 *val)
+{
+ return i2c_read(chip_no, reg, 1, val, 1);
+}
+
void twl6035_init_settings(void)
{
return;
}
+
+void twl6035_mmc1_poweron_ldo(void)
+{
+ u8 val = 0;
+
+ /* set LDO9 TWL6035 to 3V */
+ val = 0x2b; /* (3 -.9)*28 +1 */
+ palmas_write_u8(0x48, LDO9_VOLTAGE, val);
+
+ /* TURN ON LDO9 */
+ val = LDO_ON | LDO_MODE_SLEEP | LDO_MODE_ACTIVE;
+ palmas_write_u8(0x48, LDO9_CTRL, val);
+ return;
+}
int twl6035_i2c_write_u8(u8 chip_no, u8 val, u8 reg);
int twl6035_i2c_read_u8(u8 chip_no, u8 *val, u8 reg);
void twl6035_init_settings(void);
+void twl6035_mmc1_poweron_ldo(void);