armv8: QSPI: Add AHB bus 16MB+ size support

The default configuration for QSPI AHB bus can't support 16MB+.
But some flash on NXP layerscape board are more than 16MB.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index ed1c4eeb03c07d249b0c358f40163c407401cfd1..6772584a60422c8c14ee47033e43264d59659e05 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -76,6 +76,13 @@ config SECURE_BOOT
        help
                Enable Freescale Secure Boot feature
 
+config QSPI_AHB_INIT
+       bool "Init the QSPI AHB bus"
+       help
+         The default setting for QSPI AHB bus just support 3bytes addressing.
+         But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
+         bus for those flashes to support the full QSPI flash size.
+
 config SYS_FSL_IFC_BANK_COUNT
        int "Maximum banks of Integrated flash controller"
        depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 6c4238707d1c32a44a16c3da479bd495b4386478..2f54625d42b90ee4d3836e3dc0efcfc45857d494 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -373,6 +373,45 @@ void fsl_lsch2_early_init_f(void)
 }
 #endif
 
+#ifdef CONFIG_QSPI_AHB_INIT
+/* Enable 4bytes address support and fast read */
+int qspi_ahb_init(void)
+{
+       u32 *qspi_lut, lut_key, *qspi_key;
+
+       qspi_key = (void *)SYS_FSL_QSPI_ADDR + 0x300;
+       qspi_lut = (void *)SYS_FSL_QSPI_ADDR + 0x310;
+
+       lut_key = in_be32(qspi_key);
+
+       if (lut_key == 0x5af05af0) {
+               /* That means the register is BE */
+               out_be32(qspi_key, 0x5af05af0);
+               /* Unlock the lut table */
+               out_be32(qspi_key + 1, 0x00000002);
+               out_be32(qspi_lut, 0x0820040c);
+               out_be32(qspi_lut + 1, 0x1c080c08);
+               out_be32(qspi_lut + 2, 0x00002400);
+               /* Lock the lut table */
+               out_be32(qspi_key, 0x5af05af0);
+               out_be32(qspi_key + 1, 0x00000001);
+       } else {
+               /* That means the register is LE */
+               out_le32(qspi_key, 0x5af05af0);
+               /* Unlock the lut table */
+               out_le32(qspi_key + 1, 0x00000002);
+               out_le32(qspi_lut, 0x0820040c);
+               out_le32(qspi_lut + 1, 0x1c080c08);
+               out_le32(qspi_lut + 2, 0x00002400);
+               /* Lock the lut table */
+               out_le32(qspi_key, 0x5af05af0);
+               out_le32(qspi_key + 1, 0x00000001);
+       }
+
+       return 0;
+}
+#endif
+
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
@@ -382,6 +421,9 @@ int board_late_init(void)
 #ifdef CONFIG_CHAIN_OF_TRUST
        fsl_setenv_chain_of_trust();
 #endif
+#ifdef CONFIG_QSPI_AHB_INIT
+       qspi_ahb_init();
+#endif
 
        return 0;
 }

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index d684a077303618870423ca431e216b61abf85d45..b3cfd89a4b65d70c54398910f6050a89d331a55b 100644 (file)
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -18,6 +18,7 @@
 #define CONFIG_SYS_CCI400_ADDR                 (CONFIG_SYS_IMMR + 0x00180000)
 #define CONFIG_SYS_GIC400_ADDR                 (CONFIG_SYS_IMMR + 0x00400000)
 #define CONFIG_SYS_IFC_ADDR                    (CONFIG_SYS_IMMR + 0x00530000)
+#define SYS_FSL_QSPI_ADDR                      (CONFIG_SYS_IMMR + 0x00550000)
 #define CONFIG_SYS_FSL_ESDHC_ADDR              (CONFIG_SYS_IMMR + 0x00560000)
 #define CONFIG_SYS_FSL_CSU_ADDR                        (CONFIG_SYS_IMMR + 0x00510000)
 #define CONFIG_SYS_FSL_GUTS_ADDR               (CONFIG_SYS_IMMR + 0x00ee0000)

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 2df56f7a5b20adb9b18369d816ff7b652c8cdcff..e18dcbdd0900348281a9042d4ff16d637020cc90 100644 (file)
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -19,6 +19,7 @@
 #define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR       (CONFIG_SYS_IMMR + 0x00300000)
 #define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR       (CONFIG_SYS_IMMR + 0x00310000)
 #define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR       (CONFIG_SYS_IMMR + 0x00370000)
+#define SYS_FSL_QSPI_ADDR                      (CONFIG_SYS_IMMR + 0x010c0000)
 #define CONFIG_SYS_FSL_ESDHC_ADDR              (CONFIG_SYS_IMMR + 0x01140000)
 #define CONFIG_SYS_IFC_ADDR                    (CONFIG_SYS_IMMR + 0x01240000)
 #define CONFIG_SYS_NS16550_COM1                        (CONFIG_SYS_IMMR + 0x011C0500)

diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig
index 1f3d487dcb32616e2615aeed6448f2aced90c0f8..c83b2ebafd726b4bea88e9be00c7b8b12febb7a9 100644 (file)
--- a/configs/ls1012afrdm_qspi_defconfig
+++ b/configs/ls1012afrdm_qspi_defconfig
@@ -34,3 +34,4 @@ CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
+CONFIG_QSPI_AHB_INIT=y

diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig
index c0514aedb0b4d28c4e141b23acb6ba647ed78605..27bccd1227634dd221f845e7252380cc66b52b8c 100644 (file)
--- a/configs/ls1012aqds_qspi_defconfig
+++ b/configs/ls1012aqds_qspi_defconfig
@@ -38,3 +38,4 @@ CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
+CONFIG_QSPI_AHB_INIT=y

diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig
index 13c9f2107d9be83a55f5c428d03b89252b34b76f..459682dc5a102886f4f4a0f2c1f91b11fcd3e29e 100644 (file)
--- a/configs/ls1012ardb_qspi_defconfig
+++ b/configs/ls1012ardb_qspi_defconfig
@@ -38,3 +38,4 @@ CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
+CONFIG_QSPI_AHB_INIT=y

diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index 8508c09336808f62843abe89d5417bb60ff5f2a0..fa173739fb4513f945d0241da92eaf2d09825ccc 100644 (file)
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -24,3 +24,4 @@ CONFIG_SPI_FLASH=y
 CONFIG_SYS_NS16550=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_QSPI=y
+CONFIG_QSPI_AHB_INIT=y