]> git.sur5r.net Git - u-boot/commitdiff
Adjust default configuration of ADS5121 board.
authorWolfgang Denk <wd@denx.de>
Sun, 12 Aug 2007 12:47:54 +0000 (14:47 +0200)
committerWolfgang Denk <wd@denx.de>
Sun, 12 Aug 2007 12:47:54 +0000 (14:47 +0200)
Signed-off-by: Wolfgang Denk <wd@denx.de>
include/configs/ads5121.h

index 89564a90e9ec4e00ca272dd79c8bda59a4aa1f1b..22eac1b4b95c0ab93416a390944e4489ec854db5 100644 (file)
 #define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR                0x1
 #define CONFIG_MII             1       /* MII PHY management           */
-#define CONFIG_ETHADDR         00:e0:5e:00:e5:14
 
 #if 0
 /*
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
 #if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL         \
-                               | CFG_CMD_PCI           \
-                               | CFG_CMD_NET           \
-                               | CFG_CMD_PING          \
-                               )
-#else
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL         \
-                               | CFG_CMD_NET           \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_MII           \
-                               | CFG_CMD_I2C)
+#define CONFIG_CMD_PCI
 #endif
 
-#include <cmd_confdefs.h>
-
 /*
  * Watchdog timeout = CFG_WATCHDOG_VALUE * 65536 / IPS clock.
  * For example, when IPS is set to 66MHz and CFG_WATCHDOG_VALUE is set
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#ifdef CONFIG_CMD_KGDB
        #define CFG_CBSIZE      1024            /* Console I/O Buffer Size */
 #else
        #define CFG_CBSIZE      256             /* Console I/O Buffer Size */
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#ifdef CONFIG_CMD_KGDB
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
 #define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02    /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_HOSTNAME                ads5121
-#define CONFIG_ROOTPATH                /nfsroot/rootfs
 #define CONFIG_BOOTFILE                uImage
 
-#define CONFIG_IPADDR          192.168.160.77
-#define CONFIG_SERVERIP                192.168.1.1
-#define CONFIG_GATEWAYIP       192.168.1.1
-#define CONFIG_NETMASK         255.255.0.0
-
 #define CONFIG_LOADADDR                200000  /* default location for tftp and bootm */
 
-//#define CONFIG_BOOTDELAY     6       /* -1 disables auto-boot */
-#define CONFIG_BOOTDELAY       -1
+#define CONFIG_BOOTDELAY       5       /* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS                        /* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE                115200
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
                "bootm\0"                                               \
-       "load=tftp 100000 /tftpboot/ads5121/u-boot.bin\0"               \
-       "update=protect off fff00000 fff3ffff; "                        \
-               "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \
+       "load=tftp 200000 /tftpboot/ads5121/u-boot.bin\0"               \
+       "update=protect off FFF00000 +${filesize};"                     \
+               "era FFF00000 +${filesize};cp.b 200000 FFF00000 ${filesize}\0" \
        "upd=run load;run update\0"                                     \
        ""