ARMV7: OMAP3: Update Beagle xM pinmux with USB hub and DVI gpio setup

This patch adds missing pinmux setup for 4 GPIO signals used on the Beagle xM:
 - USB hub reset (gpio_56)
 - P8 USB hub reset (gpio_63)
 - DVI enable (gpio_129)
 - P8 DVI enable (gpio_170)

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index d86033772b86c70c781e07f5c64fa536902c28de..ec0da6d745477437c1c776db7929690e1e568437 100644 (file)
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -386,6 +386,10 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(UART2_TX),           (IDIS | PTD | DIS | M0)) /*UART2_TX*/
 
 #define MUX_BEAGLE_XM() \
+       MUX_VAL(CP(GPMC_NCS5),          (IDIS | PTD | EN  | M4)) /*GPIO_56*/\
+       MUX_VAL(CP(GPMC_WAIT0),         (IDIS | PTU | EN  | M4)) /*GPIO_63*/\
+       MUX_VAL(CP(MMC1_DAT7),          (IDIS | PTU | EN  | M4)) /*GPIO_129*/\
+       MUX_VAL(CP(HDQ_SIO),            (IDIS | PTU | EN  | M4)) /*GPIO_170*/\
        MUX_VAL(CP(MCBSP3_DX),          (IEN  | PTD | DIS | M4)) /*GPIO_140*/\
        MUX_VAL(CP(MCBSP3_DR),          (IEN  | PTD | DIS | M4)) /*GPIO_142*/\
        MUX_VAL(CP(MCBSP3_CLKX),        (IEN  | PTD | DIS | M4)) /*GPIO_141*/\