]> git.sur5r.net Git - u-boot/commitdiff
zynq: Add zynq microzed board support
authorJagannadha Sutradharudu Teki <jagannadha.sutradharudu-teki@xilinx.com>
Wed, 8 Jan 2014 20:18:17 +0000 (01:48 +0530)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Fri, 10 Jan 2014 14:18:33 +0000 (15:18 +0100)
MicroZed is a low-cost development board based on
the Xilinx Zynq-7000 All Programmable SoC.

APSOC:
- XC7Z010-1CLG400C
Memory:
- 1 GB of DDR3 SDRAM
- 128Mb of QSPI flash(S25FL128SAGBHI200)
- Micro SD card interface
Communication:
- 10/100/1000 Ethernet
- USB 2.0
- USB-UART
User I/O:
- 100 User I/O (50 per connector)
- Configurable as up to 48 LVDS pairs or 100 single-ended I/O
Misc:
- Xilinx PC4 JTAG configuration port
- PS JTAG pins accessible via Pmod
- 33.33 MHz oscillator
- User LED and push switch

For more info - http://zedboard.org/product/microzed

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
boards.cfg
include/configs/zynq_microzed.h [new file with mode: 0644]

index d8e27cc4cc78edd719854952e5b1778e9377ad18..682af42bdbcc4f13048530b5fc75f7c2f3f51236 100644 (file)
@@ -359,6 +359,7 @@ Active  arm         armv7          u8500       st-ericsson     u8500
 Active  arm         armv7          vf610       freescale       vf610twr            vf610twr                             vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg                                                                         Alison Wang <b18965@freescale.com>
 Active  arm        armv7          zynq        xilinx          zynq                zynq_zc70x                           -                                                                                                                                 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
 Active  arm        armv7          zynq        xilinx          zynq                zynq_zed                             -                                                                                                                                 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
+Active  arm        armv7          zynq        xilinx          zynq                zynq_microzed                        -                                                                                                                                 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
 Active  arm         armv7:arm720t  tegra114    nvidia          dalmore             dalmore                              -                                                                                                                                 Tom Warren <twarren@nvidia.com>
 Active  arm         armv7:arm720t  tegra20     avionic-design  medcom-wide         medcom-wide                          -                                                                                                                                 Alban Bedel <alban.bedel@avionic-design.de>
 Active  arm         armv7:arm720t  tegra20     avionic-design  plutux              plutux                               -                                                                                                                                 Alban Bedel <alban.bedel@avionic-design.de>
diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h
new file mode 100644 (file)
index 0000000..549a664
--- /dev/null
@@ -0,0 +1,25 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration for Micro Zynq Evaluation and Development Board - MicroZedBoard
+ * See zynq-common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_MICROZED_H
+#define __CONFIG_ZYNQ_MICROZED_H
+
+#define CONFIG_SYS_SDRAM_SIZE          (1024 * 1024 * 1024)
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0      0
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_MICROZED_H */