fsl_corenet_serdes.c:485:6: warning: symbol '__soc_serdes_init' was not declared. Should it be static?
cpu_init.c:185:6: warning: symbol 'invalidate_cpc' was not declared. Should it be static?
bcsr.c:28:27: warning: non-ANSI function declaration of function 'enable_8568mds_duart'
bcsr.c:39:33: warning: non-ANSI function declaration of function 'enable_8568mds_flash_write'
bcsr.c:46:34: warning: non-ANSI function declaration of function 'disable_8568mds_flash_write'
bcsr.c:53:29: warning: non-ANSI function declaration of function 'enable_8568mds_qe_mdio'
bcsr.c:28:33: warning: non-ANSI function declaration of function 'enable_8569mds_flash_write'
bcsr.c:33:34: warning: non-ANSI function declaration of function 'disable_8569mds_flash_write'
bcsr.c:38:28: warning: non-ANSI function declaration of function 'enable_8569mds_qe_uec'
bcsr.c:63:47: warning: non-ANSI function declaration of function 'disable_8569mds_brd_eeprom_write_protect'
ngpixis.c:245:1: error: directive in argument list
ngpixis.c:247:1: error: directive in argument list
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
printf("Corenet Platform Cache: %d KB enabled\n", size);
}
-void invalidate_cpc(void)
+static void invalidate_cpc(void)
{
int i;
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
}
-void __soc_serdes_init(void)
+static void __soc_serdes_init(void)
{
/* Allow for SoC-specific initialization in <SOC>_serdes.c */
};
return 0;
}
-U_BOOT_CMD(
- pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
- "Reset the board using the FPGA sequencer",
+#ifdef CONFIG_SYS_LONGHELP
+static char pixis_help_text[] =
"- hard reset to default bank\n"
"pixis_reset altbank - reset to alternate bank\n"
#ifdef DEBUG
"pixis_reset dump - display the PIXIS registers\n"
#endif
- "pixis_reset sysclk <SYSCLK_freq> - reset with SYSCLK frequency(KHz)\n"
+ "pixis_reset sysclk <SYSCLK_freq> - reset with SYSCLK frequency(KHz)\n";
+#endif
+
+U_BOOT_CMD(
+ pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
+ "Reset the board using the FPGA sequencer", pixis_help_text
);
#include "bcsr.h"
-void enable_8568mds_duart()
+void enable_8568mds_duart(void)
{
volatile uint* duart_mux = (uint *)(CONFIG_SYS_CCSRBAR + 0xe0060);
volatile uint* devices = (uint *)(CONFIG_SYS_CCSRBAR + 0xe0070);
bcsr[5] |= 0x01; /* Enable Duart in BCSR*/
}
-void enable_8568mds_flash_write()
+void enable_8568mds_flash_write(void)
{
volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
bcsr[9] |= 0x01;
}
-void disable_8568mds_flash_write()
+void disable_8568mds_flash_write(void)
{
volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
bcsr[9] &= ~(0x01);
}
-void enable_8568mds_qe_mdio()
+void enable_8568mds_qe_mdio(void)
{
u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
#include "bcsr.h"
-void enable_8569mds_flash_write()
+void enable_8569mds_flash_write(void)
{
setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP);
}
-void disable_8569mds_flash_write()
+void disable_8569mds_flash_write(void)
{
clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP);
}
-void enable_8569mds_qe_uec()
+void enable_8569mds_qe_uec(void)
{
#if defined(CONFIG_SYS_UCC_RGMII_MODE)
setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7),
#endif
}
-void disable_8569mds_brd_eeprom_write_protect()
+void disable_8569mds_brd_eeprom_write_protect(void)
{
clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), BCSR7_BRD_WRT_PROTECT);
}