]> git.sur5r.net Git - u-boot/commitdiff
NET: kirkwood-egiga smi access fix
authorSiddarth Gore <gores@marvell.com>
Tue, 19 Jan 2010 05:39:07 +0000 (11:09 +0530)
committerBen Warren <biggerbadderben@gmail.com>
Sun, 7 Feb 2010 06:52:14 +0000 (22:52 -0800)
Although the datasheet mentions seperate smi registers for each
port, using Port 1 smi register to access ethernet phys does not
work. Hence only Port 0 smi register should be used to access all
devices connected to the smi bus. This behavior is consistant with
the mv643xx driver in the linux kernel.

Signed-off-by: Siddarth Gore <gores@marvell.com>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
drivers/net/kirkwood_egiga.c

index 07a86cd6f71be477e3b0069325594e2cdc4646b6..2ad7feac816cd75390da26cc6bc5ac95192aa227 100644 (file)
@@ -39,6 +39,7 @@
 #include "kirkwood_egiga.h"
 
 #define KIRKWOOD_PHY_ADR_REQUEST 0xee
+#define KWGBE_SMI_REG (((struct kwgbe_registers *)KW_EGIGA0_BASE)->smi)
 
 /*
  * smi_reg_read - miiphy_read callback function.
@@ -76,7 +77,7 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data)
        /* wait till the SMI is not busy */
        do {
                /* read smi register */
-               smi_reg = KWGBEREG_RD(regs->smi);
+               smi_reg = KWGBEREG_RD(KWGBE_SMI_REG);
                if (timeout-- == 0) {
                        printf("Err..(%s) SMI busy timeout\n", __FUNCTION__);
                        return -EFAULT;
@@ -89,14 +90,14 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data)
                | KWGBE_PHY_SMI_OPCODE_READ;
 
        /* write the smi register */
-       KWGBEREG_WR(regs->smi, smi_reg);
+       KWGBEREG_WR(KWGBE_SMI_REG, smi_reg);
 
        /*wait till read value is ready */
        timeout = KWGBE_PHY_SMI_TIMEOUT;
 
        do {
                /* read smi register */
-               smi_reg = KWGBEREG_RD(regs->smi);
+               smi_reg = KWGBEREG_RD(KWGBE_SMI_REG);
                if (timeout-- == 0) {
                        printf("Err..(%s) SMI read ready timeout\n",
                                __FUNCTION__);
@@ -107,7 +108,7 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data)
        /* Wait for the data to update in the SMI register */
        for (timeout = 0; timeout < KWGBE_PHY_SMI_TIMEOUT; timeout++) ;
 
-       *data = (u16) (KWGBEREG_RD(regs->smi) & KWGBE_PHY_SMI_DATA_MASK);
+       *data = (u16) (KWGBEREG_RD(KWGBE_SMI_REG) & KWGBE_PHY_SMI_DATA_MASK);
 
        debug("%s:(adr %d, off %d) value= %04x\n", __FUNCTION__, phy_adr,
                reg_ofs, *data);
@@ -150,7 +151,7 @@ static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
        timeout = KWGBE_PHY_SMI_TIMEOUT;
        do {
                /* read smi register */
-               smi_reg = KWGBEREG_RD(regs->smi);
+               smi_reg = KWGBEREG_RD(KWGBE_SMI_REG);
                if (timeout-- == 0) {
                        printf("Err..(%s) SMI busy timeout\n", __FUNCTION__);
                        return -ETIME;
@@ -164,7 +165,7 @@ static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
        smi_reg &= ~KWGBE_PHY_SMI_OPCODE_READ;
 
        /* write the smi register */
-       KWGBEREG_WR(regs->smi, smi_reg);
+       KWGBEREG_WR(KWGBE_SMI_REG, smi_reg);
 
        return 0;
 }