Support RAM and MMC boot mode in SPL also with SPL_FIT images.
In MMC boot mode two boot options are available:
1) Boot flow with ATF(EL3) and full U-Boot(EL2):
aarch64-linux-gnu-objcopy -O binary bl31.elf bl31.bin
mkimage -A arm64 -O linux -T kernel -C none -a 0xfffe5000 -e 0xfffe5000
-d bl31.bin atf.ub
cp spl/boot.bin <sdcard fat partition>
cp atf.ub <sdcard fat partition>
cp u-boot.bin <sdcard fat partition>
2) Boot flow with full U-Boot(EL3):
cp spl/boot.bin <sdcard>
cp u-boot*.img <sdcard>
3) emmc boot mode
dd if=/dev/zero of=sd.img bs=1024 count=1024
parted sd.img mktable msdos
parted sd.img mkpart p fat32 0% 100%
kpartx -a sd.img
mkfs.vfat /dev/mapper/loop0p1
mount /dev/mapper/loop0p1 /mnt/
cp spl/boot.bin /mnt
cp u-boot.img /mnt
cp u-boot.bin /mnt
cp atf.ub /mnt
umount /dev/mapper/loop0p1
kpartx -d sd.img
cp sd.img /tftpboot/
and program it via u-boot
tftpb 10000 sd.img
mmcinfo
mmc write 10000 0 $filesize
mmc rescan
mmc part
ls mmc 0
psu_init() function contains low level SoC setup generated for every HW
design by Xilinx design tools. xil_io.h is only supporting file to fix
all dependencies from tools. The same solution was used on Xilinx Zynq.
The patch also change CONFIG_SYS_INIT_SP_ADDR to the end of OCM which
stays at the same location all the time.
Bootrom expects starting address to be at 0xfffc0000 that's why this
address is SPL_TEXT_BASE.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
select DM
select OF_CONTROL
select DM_SERIAL
+ select SUPPORT_SPL
config TEGRA
bool "NVIDIA Tegra"
obj-y += cpu.o
obj-$(CONFIG_MP) += mp.o
obj-y += slcr.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
--- /dev/null
+/*
+ * Copyright 2015 - 2016 Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <spl.h>
+
+#include <asm/io.h>
+#include <asm/spl.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+
+void board_init_f(ulong dummy)
+{
+ psu_init();
+ board_early_init_r();
+
+#ifdef CONFIG_DEBUG_UART
+ /* Uart debug for sure */
+ debug_uart_init();
+ puts("Debug uart enabled\n"); /* or printch() */
+#endif
+ /* Delay is required for clocks to be propagated */
+ udelay(1000000);
+
+ /* Clear the BSS */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* No need to call timer init - it is empty for ZynqMP */
+ board_init_r(NULL, 0);
+}
+
+#ifdef CONFIG_SPL_BOARD_INIT
+void spl_board_init(void)
+{
+ preloader_console_init();
+ board_init();
+}
+#endif
+
+u32 spl_boot_device(void)
+{
+ u32 reg = 0;
+ u8 bootmode;
+
+ reg = readl(&crlapb_base->boot_mode);
+ bootmode = reg & BOOT_MODES_MASK;
+
+ switch (bootmode) {
+ case JTAG_MODE:
+ return BOOT_DEVICE_RAM;
+#ifdef CONFIG_SPL_MMC_SUPPORT
+ case EMMC_MODE:
+ case SD_MODE:
+ case SD_MODE1:
+ return BOOT_DEVICE_MMC1;
+#endif
+ default:
+ printf("Invalid Boot Mode:0x%x\n", bootmode);
+ break;
+ }
+
+ return 0;
+}
+
+u32 spl_boot_mode(void)
+{
+ switch (spl_boot_device()) {
+ case BOOT_DEVICE_RAM:
+ return 0;
+ case BOOT_DEVICE_MMC1:
+ return MMCSD_MODE_FS;
+ default:
+ puts("spl: error: unsupported device\n");
+ hang();
+ }
+}
+
+__weak void psu_init(void)
+{
+ /*
+ * This function is overridden by the one in
+ * board/xilinx/zynqmp/(platform)/psu_init_gpl.c, if it exists.
+ */
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ /* Just empty function now - can't decide what to choose */
+ debug("%s: %s\n", __func__, name);
+
+ return 0;
+}
+#endif
unsigned int zynqmp_get_silicon_version(void);
+void psu_init(void);
+
#endif /* _ASM_ARCH_SYS_PROTO_H */
#
-# (C) Copyright 2014 - 2015 Xilinx, Inc.
+# (C) Copyright 2014 - 2016 Xilinx, Inc.
# Michal Simek <michal.simek@xilinx.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := zynqmp.o
+
+hw-platform-y :=$(shell echo $(CONFIG_SYS_CONFIG_NAME))
+
+init-objs := $(if $(wildcard $(srctree)/$(src)/$(hw-platform-y)/psu_init_gpl.c),\
+ $(hw-platform-y)/psu_init_gpl.o)
+
+ifeq ($(init-objs),)
+ifneq ($(wildcard $(srctree)/$(src)/psu_init_gpl.c),)
+init-objs := psu_init_gpl.o
+$(if $(CONFIG_SPL_BUILD),\
+$(warning Put custom psu_init_gpl.c/h to board/xilinx/zynqmp/custom_hw_platform/))
+endif
+endif
+
+obj-$(CONFIG_SPL_BUILD) += $(init-objs)
+
+# Suppress "warning: function declaration isn't a prototype"
+CFLAGS_REMOVE_psu_init_gpl.o := -Wstrict-prototypes
+
+# To include xil_io.h
+CFLAGS_psu_init_gpl.o := -I$(srctree)/$(src)
--- /dev/null
+/*
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef XIL_IO_H /* prevent circular inclusions */
+#define XIL_IO_H
+
+/* FIXME remove this when vivado is fixed */
+#include <asm/io.h>
+
+#define xil_printf(...)
+
+void Xil_ICacheEnable(void)
+{}
+
+void Xil_DCacheEnable(void)
+{}
+
+void Xil_ICacheDisable(void)
+{}
+
+void Xil_DCacheDisable(void)
+{}
+
+void Xil_Out32(unsigned long addr, unsigned long val)
+{
+ writel(val, addr);
+}
+
+int Xil_In32(unsigned long addr)
+{
+ return readl(addr);
+}
+
+#endif /* XIL_IO_H */
# define CONFIG_IDENT_STRING " Xilinx ZynqMP"
#endif
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_INIT_SP_ADDR 0xfffffffc
/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
#if !defined(COUNTER_FREQUENCY)
#define CONFIG_CMD_ENV
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
-#define CONFIG_ISO_PARTITION
+#ifndef CONFIG_SPL_BUILD
+# define CONFIG_ISO_PARTITION
+#endif
#define CONFIG_MP
/* BOOTP options */
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_CLOCKS
+#define CONFIG_SPL_TEXT_BASE 0xfffc0000
+#define CONFIG_SPL_MAX_SIZE 0x20000
+
+/* Just random location in OCM */
+#define CONFIG_SPL_BSS_START_ADDR 0x1000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x2000000
+
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_RAM_DEVICE
+
+#define CONFIG_SPL_OS_BOOT
+/* u-boot is like dtb */
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
+#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
+
+/* ATF is my kernel image */
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf.ub"
+
+/* FIT load address for RAM boot */
+#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
+
+/* MMC support */
+#ifdef CONFIG_ZYNQ_SDHCI
+# define CONFIG_SPL_MMC_SUPPORT
+# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
+# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
+# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
+# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */
+# define CONFIG_SPL_LIBDISK_SUPPORT
+# define CONFIG_SPL_FAT_SUPPORT
+# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
+#endif
+
#endif /* __XILINX_ZYNQMP_H */
projects / u-boot / commitdiff